Professional Documents
Culture Documents
FEATURES
Industrial SMD Package
Wide 2:1 Input Voltage Range
Fully Regulated Output Voltage
I/O Isolation 1500 VDC
Operating Ambient Temp. Range -40C to +85C
Overload and Short Circuit Protection
Designed-in Conducted EMI meets EN55022 Class A & FCC Level A
Water-washable Process Available(option)
Qualified for Lead-free Reflow Solder Process
According to IPC/JEDEC J-STD-020D.1
Tape & Reel Package Available
UL/cUL/IEC/EN 60950-1 Safety Approval
PRODUCT OVERVIEW
The MINMAX MSDW1 series is a range of isolated 2W DC/DC converter modules featuring fully regulated output voltages and wide 2:1 input voltage
ranges. The products come in a compact SMD package with a small footprint and low package height of just 8.0 mm (0.31 inch). All models are qualified for
lead free reflow solder processes according IPC J-STD-020D.1 standard.
An excellent efficiency allows an operating temperature range of40C to +85C(with Derating). The compact dimensions of these DC/DC converters make
them an ideal solution for many space critical applications in battery-powered equipment and instrumentation.
Input Specifications
Parameter Model Min. Typ. Max. Unit
5V Input Models -0.7 --- 11
12V Input Models -0.7 --- 25
Input Surge Voltage (1 sec. max.)
24V Input Models -0.7 --- 50
48V Input Models -0.7 --- 100
5V Input Models 3.5 4 4.5
12V Input Models 4.5 7 9
Start-Up Threshold Voltage VDC
24V Input Models 8 12 18
48V Input Models 16 24 36
5V Input Models --- 3.5 4
12V Input Models --- 6.5 8.5
Under Voltage Shutdown
24V Input Models --- 11 17
48V Input Models --- 22 34
Reverse Polarity Input Current --- --- 1 A
Short Circuit Input Power --- --- 1500 mW
Internal Power Dissipation All Models --- --- 1800 mW
Input Filter Internal Pi Type
Conducted EMI Compliance to EN 55022,class A and FCC part 15,class A
Output Specifications
Parameter Conditions Min. Typ. Max. Unit
Output Voltage Setting Accuracy --- --- 2.0 %Vom.
Output Voltage Balance Dual Output, Balanced Loads --- 1.0 2.0 %
Line Regulation Vin=Min. to Max. --- 0.3 0.5 %
Load Regulation Io=25% to 100% --- 0.5 0.75 %
Ripple & Noise 0-20 MHz Bandwidth --- --- 50 mV P-P
Transient Recovery Time --- 100 300 sec
25% Load Step Change
Transient Response Deviation --- 3 5 %
Temperature Coefficient --- 0.01 0.02 %/
Short Circuit Protection Continuous, Automatic Recovery
General Specifications
Parameter Conditions Min. Typ. Max. Unit
60 Seconds 1500 --- --- VDC
I/O Isolation Voltage
1 Seconds 1800 --- --- VDC
I/O Isolation Resistance 500 VDC 1000 --- --- M
I/O Isolation Capacitance 100KHz, 1V --- 250 420 pF
Switching Frequency --- 300 --- KHz
MTBF (calculated) MIL-HDBK-217F@25, Ground Benign 1,000,000 Hours
Safety Approvals UL/cUL 60950-1 recognition (CSA certificate), IEC/EN 60950-1(CB-scheme)
Moisture Sensitivity Level (MSL) IPC/JEDEC J-STD-020D.1 Level 2
Environmental Specifications
Parameter Conditions Min. Max. Unit
Operating Ambient Temperature Range
Natural Convection -40 +85
(See Power Derating Curve)
Case Temperature --- +90
Storage Temperature Range -50 +125
Humidity (non condensing) --- 95 % rel. H
Cooling Natural Convection
Lead-free Reflow Solder Process IPC/JEDEC J-STD-020D.1
E-mail:sales@minmax.com.tw Tel:886-6-2923150
40
20
0 ~
-40 0 20 40 60 80 100 110
Ambient Temperature C
Notes
1 Specifications typical at Ta=+25, resistive load, nominal input voltage and rated output current unless otherwise noted.
2 Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%
3 These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules;
however they may not meet all specifications listed.
4 We recommend to protect the converter by a slow blow fuse in the input supply line.
5 Other input and output voltage may be available, please contact factory.
6 That natural convection is about 20LFM but is not equal to still air (0 LFM).
7 Specifications are subject to change without notice.
Package Specifications
Mechanical Dimensions Connecting Pin Patterns
24.0 [0.94]
17.78 [0.70]
3.11 15.24 [0.6] 2.54
[0.12] [0.1]
16 10 9
13.7 [0.54]
18.1 [0.71]
Top View
16.6 [0.65]
13.7 [0.54]
19.5 [0.77]
1 7 8
1.00 [0.04]
[0.11]
2.9
8.0 [0.31]
S SEATING
PLANE 1.6 [0.06] 2.54 [0.10]
[0.32 0.02]
~4
0.25 [0.01]
8.25 0.5
0.15 S
Bottom View
E-mail:sales@minmax.com.tw Tel:886-6-2923150
E-mail:sales@minmax.com.tw Tel:886-6-2923150
Test Setup
Input Reflected-Ripple Current Test Setup
Input reflected-ripple current is measured with a inductor Lin (4.7H) and Cin (220F, ESR < 1.0 at 100 KHz) to simulate source impedance. Capacitor Cin, offsets
possible battery impedance.
Current ripple is measured at the input terminals of the module, measurement bandwidth is 0-500 KHz.
To Oscilloscope +Vin +Out
+ + Lin Current DC / DC
Load
Probe Converter
Battery Cin
-Vin -Out
Technical Notes
Overcurrent Protection
To provide protection in a fault (output overload) condition, the unit is equipped with internal current limiting circuitry and can endure current limiting for an unlimited
duration. At the point of current-limit inception, the unit shifts from voltage control to current control. The unit operates normally once the output current is brought back
into its specified range.
18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Minmax Technology Co., Ltd.
Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: sales@minmax.com.tw 2016/03/31 REV:8 Page 5 of 5