Professional Documents
Culture Documents
Name of Work - Dist.Pt.pkd.2016-17- Electrification works to the RMSA building at GHS Nellikurissi under Lakkidi-perur Grama Panchayat
1 23 4 5 6 7 8 9 10 11 12 13
1 Supply and wiring points according to IS 732-1989 using rigid PVC ivory conduit of minimum size 20 mm
conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit
using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded
single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing
with 2.00 mm copper conductor (14 SWG) size along with wiring/ cables and giving connection , required qty of
copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes,
modular type front plates (white) etc. up to and including 6 A modular typeROHS compliant SP switches and making
good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be
tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as
required.
a 841.00 44 Nos Single control light point with 6A, 3 plate ceiling rose 2 48 Nos 40368.00
b 1498.00 21 Nos Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator. 3 24 Nos 35952.00
c 421.00 7 Nos Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light 3 14 Nos 5894.00
points.
d 561.00 8 Pts Do---- Independent plug-------Do 3 1 Pts 561.00
3 2726.00 10 Nos Do - on wall using 2 nos. flat iron brackets made from 25x6mm flat iron - do 20wLED lamp 4 10 Nos 27260.00
4 Supply, conveyance, installation, testing and commissioning of pre-wired light fitting of the following types
complete with all accessories and lamps etc. in the existing GI pipe and giving connections with required length of
16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving
connection etc. as required.
a 3142.00 2 Nos LED Street light fitting IP 65 (25w) Philips make BRP 0202 /equivalent with all accesesories 5 0 Nos 0.00
5 Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to
shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of
synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as
required (for the installation of outdoor light fittings).
a 274.00 3 Mtr 25 mm dia with HG company fabricated clamps 6 0 Mtr 0.00
6 Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard
accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC
sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.
22 339.80 2 Nos Supplying siemens / tropodur type nickel plated double compression brass cable glandwith earth clips and 18 2 Nos 679.60
aluminium socket for PVC insulated and PVC sheathed armoured aluminium/ copper conductor cable 1.1 KV grade,
and making end termination suitable for 2/ 3/ 3/ 4 core cable required. 4x10 sq mm
23 320.40 4 Nos Do-4x6 sq mm - do 18 4 Nos 1281.60
24 320.40 2 Nos Do-4x16 sq mm - do 18 2 Nos 640.80
25 295.20 8 Nos Do-2x6 sq mm - do 18 0 Nos 0.00
26 3917.00 2 Nos Supply and providing plate earthing as per IS 3043 with 600x600x6.30 mm GI/CI earth plate, 20 mm GI watering 19 2 Nos 7834.00
pipe fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel with weld mesh, filling required quantity of
charcoal including construction of inspection chamber with a bed concrete of 1:4:8 PCC using 40 mm broken stone
(10 cm thick), brick work in cement mortar 1:6, plastering the surface of brick masonry and the exposed surface of
PCC bed with cement mortar 1:4, 12 mm thick, (the finished inside dimension shall be 300 x 300 x 300 mm) but
excluding test joint, earth continuity conductor to the plate, and covering at the top. (in ordinary soil)
27 Supply and providing the following sizes of cast iron gully trap with covering at the top of the inspection chamber of
earth pit as required
a 267.00 2 Nos 300 x 300 x 6 mm cast iron gully trap with covering 20 2 Nos 534.00
28 165.00 0.6 Mtr Supply and providing test joint for the earthing system using 2 Nos of 2 x 25 x 3 mm GI strip sizes of strips 20 0.6 Mtr 99.00
Labour charges
1 No Electrician 443.00 0.30 132.90
1 No Wire Man Assistant 396.00 0.30 118.80
251.70
Add 1 % T & P 2.517
Total B 254.22
Overhead & Profit - C - 15 % of A 303.00
Total A + B + C 2577.22
Say Rs. 2577/ E
7
Name of Work:- Dist.Pt.pkd.2016-17- Electrification works to the RMSA building at GHS Nellikurissi under Lakkidi-perur Grama Panchayat
Sl No Sub Head of Estimate and Items of work Original Estimate Revised Estimate Savings Excess Reason for
Quant Rate Amount Quantity Amount vartiation
ity Alrea To be Total Already To be Total
dy execu Executed execut
Exec ted ed
uted
1 Supply and wiring points according to IS 732-1989 using rigid PVC ivory Qty varied as per
conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and actual site
with suitable size specials conforming to IS 3419-1988, fixing the conduit condition
using metal saddles spacing not exceeding 50 cm or concealed suitably
and with 1.00 sq mm PVC insulated stranded single core FR copper
conductor cable 650V grade,including providing switch board main ,and
continuous earthing with 2.00 mm copper conductor (14 SWG) size along
with wiring/ cables and giving connection , required qty of copper earth
socket, brass bolt and nut crimping etc complete with suitable size
modular type metal switch boxes, modular type front plates (white) etc. up
to and including 6 A modular typeROHS compliant SP switches and
making good the surface of wall, colour washing etc. complete. All the
terminations in the switch boards and DB's shall be tinned and the wires
shall be drawn and fixed along the periphery of the box using suitable
ties, tie mounts etc as required.
a Single control light point with 6A, 3 plate ceiling rose 44 841.00 37004.00 48 0.00 48 40368.00 0.00 40368.00 0.00 3364.00
b Single control ceiling fan point with 6 A, 3 plate ceiling rose & with 21 1498.00 31458.00 24 0.00 24 35952.00 0.00 35952.00 0.00 4494.00 Refer item No- 1
socket size stepped electronic regulator.
c Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch 7 421.00 2947.00 14 0.00 14 5894.00 0.00 5894.00 0.00 2947.00 Refer item No- 1
in the same switch board as that of light points.
d Do---- Independent plug-------Do 8 561.00 4488.00 1 0.00 1 561.00 0.00 561.00 3927.00 0.00 Only one no is
used for staff
room
2 Supply, conveyance, installation, testing and commissioning of pre-wired 32 2868.00 91776.00 32 0.00 32 91776.00 0.00 91776.00 0.00 0.00
light fittings made of .5mm thick CRCA sheet accessories and lamps etc.
including supplying and fixing ball and socket arrangements on PVC
round block, suspension down rod of 19mm dia MS conduit up to 2x30cm
length including painting and wiring the down rod with 16/0.20mm 3 core
round copper conductor flex wire conforming to relevant ISS or extending
the original wiring and giving connections etc. a required. 20wLED light
fittings
8
3 Do - on wall using 2 nos. flat iron brackets made from 25x6mm flat iron - 10 2726.00 27260.00 10 0.00 10 27260.00 0.00 27260.00 0.00 0.00
do 20wLED lamp
4 Supply, conveyance, installation, testing and commissioning of pre-wired
light fitting of the following types complete with all accessories and
lamps etc. in the existing GI pipe and giving connections with required
length of 16/0.20mm 3 core copper conductor flex wire conforming to
relevant ISS or extending the original wiring and giving connection etc. as
required.
a LED Street light fitting IP 65 (25w) Philips make BRP 0202 /equivalent 2 3142.00 6284.00 0 0.00 0 0.00 0.00 0.00 6284.00 0.00 Note done
with all accesesories
5 Supply, fabrication, conveyance and fixing the following sizes of B class
GI pipe bent to shape / cut and welded to shape and fixing the same to
wall / parapet using clamps as noted along with each size, painting with 2
coats of synthetic enamel paint over a coat of zinc chromate primer,
making good the damages, colour washing etc as required (for the
installation of outdoor light fittings).
a 25 mm dia with HG company fabricated clamps 3 274.00 822.00 0 0.00 0 0.00 0.00 0.00 822.00 0.00 Note done
6 Supply, conveyance, installation, testing and commissioning of ceiling
fans of the following sizes using standard accessories excluding
resistance type regulator, wiring the down rod with 16/0.20mm PVC
insulated and PVC sheathed 650/1100V grade 3 core round copper
conductor flex wire or with extended original wiring etc. as required.
a 1200 mm sweep - 5 star rated 21 1853.00 38913.00 21 0.00 21 38913.00 0.00 38913.00 0.00 0.00
7 Supply and providing every additional length of down rod of suitable size 3 115.00 345.00 11 0.00 11 1265.00 0.00 1265.00 0.00 920.00 Qty varried as per
heavy gauge GI / WI pipe with 16/0.20mm PVC insulated and PVC site condition
sheathed 3 core round copper conductor flex wire conforming in relevant
ISS or with original wiring extended including painting as required.
8 Supplying and providing extra H.G conduit down rod of 19 mm dia 2 x 3 198.00 594.00 9.6 0.00 9.6 1900.80 0.00 1900.80 0.00 1306.80 Do---
1.00 m long with 16/0.20 mm 3 core copper conductor flex wire
conforming to relevant ISS or with the extended original wiring and
giving connection etc. as required.
9 Supply and installation of suitable size MS rod type fan clamp as per IS 16 124.00 1984.00 24 0.00 24 2976.00 0.00 2976.00 0.00 992.00 Refer item No-
732 as required. 21
10 Supply and installation of suitable size MS belt type fan clamp fabricated 5 182.00 910.00 0 0.00 0 0.00 0.00 0.00 910.00 0.00 Note done
from MS flat (2 pieces) as per IS 732 as required.
11 Supply & Fixing the following types/ sizes of boxes suitable for modular
accessories in surface/ recess including making good the damages, colour
washing etc as required. (ROHS)
9
a 8 module metal box in recess 24 232.00 5568.00 31 0.00 31 7192.00 0.00 7192.00 0.00 1624.00 Addionaly
excecuted on as
per the request
from school
authoties
b 8 module moulded plastic box on surface 5 233.00 1165.00 0 0.00 0 0.00 0.00 0.00 1165.00 0.00 Note done
c 3 module metal box in recess 5 180.00 900.00 11 0.00 11 1980.00 0.00 1980.00 0.00 1080.00 Refer item No- 11
a
12 Supply & Fixing the following types/ sizes of front plates on the existing
modular boxes. (RoHS)
a 8 module white/ off-white 29 187.00 5423.00 31 0.00 31 5797.00 0.00 5797.00 0.00 374.00 Do---
b 3 module white/ off-white 5 116.00 580.00 11 0.00 11 1276.00 0.00 1276.00 0.00 696.00 Do---
13 Supply and Fixing the following modular switches & accessories in the
existing front plates and giving necessary connections as required (Group
B)
a 6 A SP 1 way switch 29 119.00 3451.00 31 0.00 31 3689.00 0.00 3689.00 0.00 238.00 Refer item No- 11
b 16 A SP 1 way switch 5 161.00 805.00 11 0.00 11 1771.00 0.00 1771.00 0.00 966.00 a
c 6A 3 pin shuttered socket 87 157.00 13659.00 93 0.00 93 14601.00 0.00 14601.00 0.00 942.00
d 6/16 A socket 5 223.00 1115.00 11 0.00 11 2453.00 0.00 2453.00 0.00 1338.00
14 Supply and fixing the following sizes of PVC Conduit conforming to IS
9537 / 1983 part III along with all required accessories in recess
including cutting the wall and making good the damages etc as required.
a 20 mm dia light gauge 225 83.00 18675.00 346.6 0.00 346.6 28767.80 0.00 28767.80 0.00 10092.80 Change of
b Do---25mm---------Do 50 95.00 4750.00 8.4 0.00 8.4 798.00 0.00 798.00 3952.00 0.00 location of
c 32 mm dia light gauge 10 119.00 1190.00 0 0.00 0 0.00 0.00 0.00 1190.00 0.00 Computer nodes
& PP
15 Supplying and clamping the following sizes of corrugated PVC flexible 25 52.00 1300.00 0 0.00 0 0.00 0.00 0.00 1300.00 0.00 Note done
conduit with necessary compression gland with locking ring and check
nut at termination pointed using suitable size GI / painted MS saddles
spacing not exceeding 60 cms on surface including making good the
damages, colour washing etc. as required. 20 mm dia
16 25 mm dia 5 63.00 315.00 0 0.00 0 0.00 0.00 0.00 315.00 0.00 Do---
17 Supply and drawing 650/1100 V grade PVC insulated stranded single Change of
core copper conductor cables conforming to IS 694 part I 1990 in the location of
existing surface / recess conduit as required including giving necessary Computer nodes
connections of the following sizes. & PP
a 1.50 sq mm 2 run 130 61.00 7930.00 112 0.00 112 6832.00 0.00 6832.00 1098.00 0.00
b 1.50 sq mm 3 run 20 77.00 1540.00 0 0.00 0 0.00 0.00 0.00 1540.00 0.00 Note done
10
c 1.50 sq mm 4 run 55 94.00 5170.00 118.3 0.00 118.3 11120.20 0.00 11120.20 0.00 5950.20 Refer item No-
17
d 1.50 sq mm 5 run 10 110.00 1100.00 0 0.00 0 0.00 0.00 0.00 1100.00 0.00 Note done
e 1.50 sq mm 6 run 25 126.00 3150.00 0 0.00 0 0.00 0.00 0.00 3150.00 0.00 Note done
f 1.50 sq mm 8 run 10 159.00 1590.00 0 0.00 0 0.00 0.00 0.00 1590.00 0.00 Note done
g 2.50 sq mm 2 run 60 81.00 4860.00 110.9 0.00 110.9 8982.90 0.00 8982.90 0.00 4122.90 Refer item No-
h 2.50 sq mm 4 run 15 134.00 2010.00 44.5 0.00 44.5 5963.00 0.00 5963.00 0.00 3953.00 17
18 Supply and installation of sheet steel, phosphatised and painted, dust and
vermin proof enclosure of MCB DB including copper /brass bus bar,
neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc.
fixed on wall using suitable anchor bolts or fixed in recess including
cutting hole on the wall , making good the damages, colour washing etc.
as required
a 6 way (8+18) - double cover TPN vertical DB with provision for fixing 1 8960.00 8960.00 1 0.00 1 8960.00 0.00 8960.00 0.00 0.00
4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as
outgoing (IP 42/43)
b 4 way (8+12) - double cover TPN vertical DB with provision for fixing 1 7739.00 7739.00 1 0.00 1 7739.00 0.00 7739.00 0.00 0.00
4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as
outgoing (IP 42/43)
c 4 way (8+12) - three phase double cover (IP 42/43) 2 3329.00 6658.00 2 0.00 2 6658.00 0.00 6658.00 0.00 0.00
d 12 way single phase double cover (IP 42/43) 2 1899.00 3798.00 2 0.00 2 3798.00 0.00 3798.00 0.00 0.00
e DP enclosure for independent mounting of MCB 2 486.00 972.00 0 0.00 0 0.00 0.00 0.00 972.00 0.00 Note done
19 Supply and installation of the following accessories suitable for 50 Hz ,
AC supply conforming to IS 8828-1995/ IEC 60898 of the following
current ratings in the existing enclosure and giving connections as
required
a 63 A, 10 kA, 4 pole MCB (C curve) 1 1751.00 1751.00 1 0.00 1 1751.00 0.00 1751.00 0.00 0.00
a 32 A, 10 kA, 4 pole MCB (C curve) 1 1180.00 1180.00 1 0.00 1 1180.00 0.00 1180.00 0.00 0.00
b 25 A four pole mini break isolator 2 618.00 1236.00 2 0.00 2 1236.00 0.00 1236.00 0.00 0.00
c 25 A, 4 pole, 30 mA RCCB 2 2744.00 5488.00 2 0.00 2 5488.00 0.00 5488.00 0.00 0.00
d 25 A double pole mini break isolator 2 342.00 684.00 0 0.00 0 0.00 0.00 0.00 684.00 0.00 Note done
e 6 A to 25 A, 10 kA, DP MCB (C curve) 2 566.00 1132.00 2 0.00 2 1132.00 0.00 1132.00 0.00 0.00
f 6-32A( C curve)10 kA, SP MCB (C curve) 34 219.00 7446.00 45 0.00 45 9855.00 0.00 9855.00 0.00 2409.00 Exceeded as per
no.of circuits
g 6 A to 32 A, 10 kA, TP MCB (C curve) 3 919.00 2757.00 3 0.00 3 2757.00 0.00 2757.00 0.00 0.00
11
20 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed Change of
armoured aluminium power cable, 1.1 KV grade of the following sizes location of Db's
using clamps noted along with the cables, spacing of clamps not
exceeding 60cms, making good the damages , colour washing etc. as
required.
a 4 core 6 sq mm with factory made clamp 35 186.00 6510.00 48 0.00 48 8928.00 0.00 8928.00 0.00 2418.00
b 4 core 10 sq mm 25 179.00 4475.00 18 0.00 18 3222.00 0.00 3222.00 1253.00 0.00
c 4 core 16 sq mm with factory made clamp 10 231.00 2310.00 10 0.00 10 2310.00 0.00 2310.00 0.00 0.00
d 2 core 6 sq mm with factory made clamp 60 157.00 9420.00 0 0.00 0 0.00 0.00 0.00 9420.00 0.00 Note done
21 Supply & laying of one number PVC insulated and PVC sheathed 50 239.00 11950.00 40 0.00 40 9560.00 0.00 9560.00 2390.00 0.00 Qty varried as per
armoured aluminium power cable of 1.1KV grade of the following sizes site condition
in ground including excavation of trench of size 35 x 75 cm, refilling the
trench etc. as required but excluding sand cushioning and protective
covering (in ordinary soil). 4 core 10 sq mm
22 Supplying siemens / tropodur type nickel plated double compression 2 339.80 679.60 2 0.00 2 679.60 0.00 679.60 0.00 0.00
brass cable glandwith earth clips and aluminium socket for PVC insulated
and PVC sheathed armoured aluminium/ copper conductor cable 1.1 KV
grade, and making end termination suitable for 2/ 3/ 3/ 4 core cable
required. 4x10 sq mm
23 Do-4x6 sq mm - do 4 320.40 1281.60 4 0.00 4 1281.60 0.00 1281.60 0.00 0.00
24 Do-4x16 sq mm - do 2 320.40 640.80 2 0.00 2 640.80 0.00 640.80 0.00 0.00
25 Do-2x6 sq mm - do 8 295.20 2361.60 0 0.00 0 0.00 0.00 0.00 2361.60 0.00 Note done
26 Supply and providing plate earthing as per IS 3043 with 600x600x6.30 2 3917.00 7834.00 2 0.00 2 7834.00 0.00 7834.00 0.00 0.00
mm GI/CI earth plate, 20 mm GI watering pipe fixed to the earth plate
with 20 x 3 mm GI clamps, GI funnel with weld mesh, filling required
quantity of charcoal including construction of inspection chamber with a
bed concrete of 1:4:8 PCC using 40 mm broken stone (10 cm thick), brick
work in cement mortar 1:6, plastering the surface of brick masonry and
the exposed surface of PCC bed with cement mortar 1:4, 12 mm thick,
(the finished inside dimension shall be 300 x 300 x 300 mm) but
excluding test joint, earth continuity conductor to the plate, and covering
at the top. (in ordinary soil)
27 Supply and providing the following sizes of cast iron gully trap with 0.00 0.00 0.00 0.00 0.00 0.00 0.00
covering at the top of the inspection chamber of earth pit as required
a 300 x 300 x 6 mm cast iron gully trap with covering 2 267.00 534.00 2 0.00 2 534.00 0.00 534.00 0.00 0.00
28 Supply and providing test joint for the earthing system using 2 Nos of 2 x 0.6 165.00 99.00 0.6 0.00 0.6 99.00 0.00 99.00 0.00 0.00
25 x 3 mm GI strip sizes of strips including cutting and bending to shape,
drilling necessary holes and fixed to the watering pipe etc as required.
12
29 Supply and providing earth lead from the test joint to the earth electrode 7.2 73.00 525.60 7.2 0.00 7.2 525.60 0.00 525.60 0.00 0.00
using 25x3 mm G I srip of conductors/ strips including cutting, drilling
necessary holes (in case of strip) and fixing firmly with plate test joint etc
as required.
30 Supply and drawing bare earthing conductors of the following sizes along 0.00 0.00 0.00 0.00 0.00 0.00 0.00
with wiring/ cables and giving connection as required.
a 2.00 mm copper conductor (14 SWG) 315 26.00 8190.00 342.8 0.00 342.8 8912.80 0.00 8912.80 0.00 722.80 Qty varried based
b 2.65 mm copper conductor (12 SWG) 300 43.00 12900.00 204 0.00 204 8772.00 0.00 8772.00 4128.00 0.00 on the actual
c 3.15 mm copper conductor (10 SWG) 15 62.00 930.00 6 0.00 6 372.00 0.00 372.00 558.00 0.00 excecution
Change of
31 Supply and laying bare earthing conductors of the following sizes laid 0.6 location of Earth
m below ground level including excavating trench of suitable size and pit
refilling etc. as required (in ordinary soil).
a 3.15 mm copper conductor (10 SWG) 15 77.00 1155.00 20 0.00 20 1540.00 0.00 1540.00 0.00 385.00
32 supply of superior quality copper earth socket for the following sizes of Qty varried based
earth conductor including crimping etc. as required. on the no. Of
a 2.00 mm (14 SWG) 70 15.00 1050.00 84 0.00 84 1260.00 0.00 1260.00 0.00 210.00 terminations
b 2.65/3.15 mm (10/12 SWG) 16 19.00 304.00 8 0.00 8 152.00 0.00 152.00 152.00 0.00
33 Supply and providing the following sizes of bolt and nut with washers on
the existing MS box / earth bus etc. as required including drilling
necessary holes as required
a 12 x 3mm brass bolt & nut 32 11.30 361.60 32 0.00 32 361.60 0.00 361.60 0.00 0.00
b 25 x 3mm brass bolt & nut 12 17.00 204.00 0 0.00 0 0.00 0.00 0.00 204.00 0.00 Note done
c 25 x 6 mm brass bolt & nut 4 20.00 80.00 4 0.00 4 80.00 0.00 80.00 0.00 0.00
34 Supplying , threading , laying and jointing of the following sizes of 'B'
class GI pipe with all required accessories in ground in the existing trench
as protective covering to earth leads.
a 15 mm dia 10 90.00 900.00 0 0.00 0 0.00 0.00 0.00 900.00 0.00 Note done
35 Supply and clamping the 40mm of "B" class GI pipe on wall with all 3 269.00 807.00 2 0.00 2 538.00 0.00 538.00 269.00 0.00 As per site
required accessories & clamps etc., including cutting and making good condition
the walls, painting the exposed portions etc., as protective covering to
earth leads / cables.
36 Fabrication, supply & installation of dust and vermin proof, wall
mounting, thermoplastic meter box of folowing size suitable for fixing
KSEB meter,fuse units, CT etc, hinged door construction for the front side
with compartments if necessary, providing vision panel for the meter
compartment, knock out for cable entry and exit.
7739.00
16
464495.70
17
Estimate for 25% Excess items - Dist.Pt.pkd.2016-17- Electrification works to the RMSA building at GHS Nellikurissi
under Lakkidi-perur Grama Panchayat
SL No As Sub head of estimates and item of works Exceeded Rate Amount
per Quantity
Agreement
1 Supply and wiring points according to IS 732-1989 using rigid PVC
ivory conduit of minimum size 20 mm conforming to IS 9537 part
III 1983 and with suitable size specials conforming to IS 3419-1988,
fixing the conduit using metal saddles spacing not exceeding 50 cm
or concealed suitably and with 1.00 sq mm PVC insulated stranded
single core FR copper conductor cable 650V grade,including
providing switch board main ,and continuous earthing with 2.00 mm
copper conductor (14 SWG) size along with wiring/ cables and
giving connection , required qty of copper earth socket, brass bolt
and nut crimping etc complete with suitable size modular type metal
switch boxes, modular type front plates (white) etc. up to and
including 6 A modular typeROHS compliant SP switches and
making good the surface of wall, colour washing etc. complete. All
the terminations in the switch boards and DB's shall be tinned and
the wires shall be drawn and fixed along the periphery of the box
using suitable ties, tie mounts etc as required.
c Combined plug point with 6 A, 5 pin plug socket controlled by 6 A 7 Nos 421.00 2947.00
switch in the same switch board as that of light points.
7 Supply and providing every additional length of down rod of 8 Mtr 115.00 920.00
suitable size heavy gauge GI / WI pipe with 16/0.20mm PVC
insulated and PVC sheathed 3 core round copper conductor flex
wire conforming in relevant ISS or with original wiring extended
including painting as required.
8 Supplying and providing extra H.G conduit down rod of 19 mm dia 6.6 Mtr 198.00 1306.80
2 x 1.00 m long with 16/0.20 mm 3 core copper conductor flex wire
conforming to relevant ISS or with the extended original wiring and
giving connection etc. as required.
9 Supply and installation of suitable size MS rod type fan clamp as per 8 Nos 124.00 992.00
IS 732 as required.
11 Supply & Fixing the following types/ sizes of boxes suitable for 0 0.00
modular accessories in surface/ recess including making good the
damages, colour washing etc as required. (ROHS)
a 8 module metal box in recess 7 Nos 232.00 1624.00
c 3 module metal box in recess 6 Nos 180.00 1080.00
12 Supply & Fixing the following types/ sizes of front plates on the 0 0.00
existing modular boxes. (RoHS)
b 3 module white/ off-white 6 Nos 116.00 696.00
13 Supply and Fixing the following modular switches & accessories in 0 0.00
the existing front plates and giving necessary connections as
required (Group B)
a 6 A SP 1 way switch 2 Nos 119.00 238.00
c 6A 3 pin shuttered socket 6 Nos 157.00 942.00
14 Supply and fixing the following sizes of PVC Conduit conforming 0 0.00
to IS 9537 / 1983 part III along with all required accessories in
recess including cutting the wall and making good the damages etc
as required.
a 20 mm dia light gauge 121.6 Mtr 83.00 10092.80
18
17 Supply and drawing 650/1100 V grade PVC insulated stranded 0 0.00
single core copper conductor cables conforming to IS 694 part I
1990 in the existing surface / recess conduit as required including
giving necessary connections of the following sizes.
7 14 1.75 8.75 7
3 11 0.75 3.75 8
16 24 4.00 20.00 8
24 31 6.00 30.00 7
5 11 1.25 6.25 6
0.00 0.00 delete
5 11 1.25 6.25 6
0.00 0.00 delete
34 45 8.50 42.50 11
0.00 0.00 delete
35 48 8.75 43.75 13
0.00 0.00 delete
15 20 3.75 18.75 5
Name of Work - Construction of office cum shopping complex under Vallappuzha Gra
1 23 4 5
1 841.00 129 Pts
2 823.00 16 Pts
3 1498.00 54 Pts
4 421.00 34 Nos
5 875.00 3 Nos
6 561.00 2 Nos
7 271.00 16 Nos
8 1773.00 8 Nos
9 1915.00 49 Nos
10 1717.00 27 Nos
11 4678.00 3 Nos
12 198.00 15 Mtr
13 16866.00 6 Nos
14 299.00 9 Mtr
15 1828.00 6 Nos
16 294.00 6 Nos
17 1853.00 39 Nos
18 182.00 15 Nos
19 124.00 24 Nos
20 115.00 13 Mtr
21 685.00 27 Nos
22 969.00 21 Nos
23 110.00 1 Nos
24 145.00 1 Nos
25 181.00 1 Nos
26 205.00 3 Nos
27 3329.00 4 Nos
28 8984.00 2 Nos
29 1899.00 17 Nos
30 604.00 1 Nos
31 1855.00 1 Nos
32 1369.00 1 Nos
33 1751.00 1 Nos
34 919.00 5 Nos
35 618.00 5 Nos
36 2023.00 4 Nos
37 566.00 1 Nos
38 342.00 16 Nos
39 2023.00 16 Nos
40 219.00 45 Nos
42 186.00 40 Mtr
43 197.00 10 Mtr
44 231.00 15 Mtr
45 281.00 5 Mtr
46 600.00 10 Mtr
47 582.00 10 Mtr
48 623.00 15 Mtr
49 131.00 10 Mtr
50 252.00 34 Nos
51 252.00 8 Nos
52 271.00 2 Nos
53 319.00 4 Nos
54 474.00 2 Nos
55 807.00 2 Nos
56 1335.00 1 Nos
58 95.00 90 Mtr
59 120.00 30 Mtr
60 133.00 10 Mtr
61 81.00 140 Mtr
62 134.00 55 Mtr
63 61.00 110 Mtr
64 94.00 60 Mtr
65 126.00 20 Mtr
66 106.00 25 Mtr
67 26.00 410 Mtr
a 107.00 18 Mtr
72
a 15.00 46 Nos
b 19.00 12 Nos
c 23.00 8 Nos
73
a 11.30 18 Nos
b 17.00 8 Nos
c 20.00 8 Nos
74
a 90.00 10 Mtr
75 3917.00 2 Nos
76
a 267.00 2 Nos
80 4092.00 0.30 m2
81 54.00 25 Mtr
82 807.00 4 Mtr
85 8689.00 1 No
86 4064.00 1 No
87 2053.00 2 No
88 1683.00 1 No
89 459.00 1 No
90 196.00 1 No
91 123.00 2 Nos
92 136.00 1 No
93 22.00 20 Mtr
94 32.00 20 Mtr
95 44.00 10 Mtr
96 1685.00 1 Mtr
97 1618.00 14 m2
98 4092.00 0.80 m2
99 54.00 50 Mtr
103 2118.00 1 No
104 1618.00 8 No
105 1683.00 1 No
106 459.00 1 No
107 196.00 1 No
108 123.00 2 Nos
109 136.00 1 No
113 1618.00 14 m2
119 3164.00 1 No
120 1618.00 9 No
121 1683.00 1 No
122 459.00 1 No
123 196.00 1 No
124 123.00 2 No
125 136.00 1 Nos
126 22.00 20 No
130 2324.00 2 Kg
132 204.00 1 No
133
Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of
light points.
Call bell point with piano type 6 A bell push at one end and 6 A, 3 plate ceiling rose at other end
Independent plug
Supply and fixing angle / straight brass lined skirt type, bakelite batten holder with 200mm polished
aluminium shade. and normal size 5W BC / ES / E14 retrofit CFL and giving connection etc as required
Supply, conveyance, installation, testing and commissioning of pre-wired light fitting of 1x28wT5 fitting with
APF electronic ballast suitable for continuous operation with THD <10%, power factor >0.98, RoHS
compliant,high lumen tube . made of CRCA sheet of .5mm thickness complete with all accessories and lamps
etc. directly on wall using 2 nos. flat iron brackets made from 25x6mm flat iron, painting the flat iron bracket
and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to
relevant ISS or extending the original wiring and giving connection etc. as required.
Surface mounting decorative fluorescent tube light fitting 2x28W T5 (Cat-2) on down rod complete with lamp
holder, APF electronic ballast suitable for continuous operation with THD <10%, power factor >0.98, RoHS
compliant,high lumen tube, duly wired up for use on 230 V AC supply directly on wall
Supplying and providing extra H.G conduit down rod of 19 mm dia 2 x 1.00 m long with 16/0.20 mm 3 core
copper conductor flex wire conforming to relevant ISS or with the extended original wiring and giving
connection etc. as required.
Supply, conveyance, installation, testing and commissioning of pre-wired light fitting of LED Street light fitting
IP 65 (70w) Philips/Crompton/Osram /equivalent with all accesesories complete with all accessories and lamps
etc. in the existing GI pipe and giving connections with required length of 16/0.20mm 3 core copper conductor
flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.
Supply, fabrication, conveyance and fixing 32 mm dia with HG company fabricated clamps sizes of B class GI
pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along
with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making
good the damages, colour washing etc as required (for the installation of outdoor light fittings).
Supply, conveyance, installation, testing and commissioning of the following sizes of exhaust fans in the
existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving
connections with required length of 24/0.20mm PVC insulated and PVC sheathed 3 core round copper
conductor flex wire conforming to relevant ISS.- 300/ 305 mm, single phase light duty exhaust fan in metal
frame
Charges for cutting holes suitable for accommodating exhaust fans of sizes up to 305 mm sweep including
plastering, colour washing etc. as required.
Supply, conveyance, installation, testing and commissioning of ceiling fans of 1200 mm sweep 5 star
(Category B) sizes using standard accessories excluding resistance type regulator, wiring the down rod with
16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or
with extended original wiring etc. as required.
Supply and installation of suitable size MS belt type fan clamp fabricated from MS flat (2 pieces) as per IS 732
as required.
Supply and installation of suitable size MS rod type fan clamp as per IS 732 as required.
Supply and providing every additional length of down rod of suitable size heavy gauge GI / WI pipe with
16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming in relevant
ISS or with original wiring extended including painting as required.
Supply & Fixing 3 module metal boxwith white / off white front plate suitable for modular accessories in
recess including supply and providing 1no 16/20 A combined shutttered socket and 1 no 20 A 1way SP switch
with indicator, making good the damages, colour washing etc as required (Group B) (ROHS)
Supply and fixing 3 Nos 6A Modular shuttered type plug socket controlled by 1 No 6A modular switch on 8
module modular metal box with white front plate, earthing make good the damages colour washing etc as
required on surfces/reces as power plug (Group B)(ROHS)
Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving
connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed
round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the
MS box and making good the surface as required. - Buzzer
Call bell
Supply and installation of 4 way three phase double cover (IP 42/43) sheet steel, phosphatised and painted,
dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN
rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including
cutting hole on the wall , making good the damages, colour washing etc. as required
4 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as
outgoing (IP 42/43)
12 way single phase double cover (IP 42/43)
25 A, 4 pole, 30 mA RCCB
25 A, 2 pole, 30 mA RCCB
Supply, laying and clamping of 2 core 6 sq mm with factory made clampPVC insulated and PVC sheathed
armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the
cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.
Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of
HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required
accessories in ground in the existing trench - 63 / 50 mm or nearest size
Supplying siemens / tropodur type nickel plated single compression brass cable gland for PVC insulated and
PVC sheathed armoured aluminium/ copper conductor cable 1.1 KV grade, and making end termination
suitable for 2/ 3/ 3/ 4 core cable required. 2x6 sq mm
4x6 sq mm
4x10 sq mm
4x16 sq mm
4x25 sq mm
3.5x95 sq mm
Supply and making outdoor / indoor end termination for 1.1 KV grade PVC/PILC/XLPE cables of 3.5 core 95
sq mm including supply of end sealing kit consisting of cable jointing compound, hardener, plastic mould,
adhesive-cum-solvent, epoxy putty, earth continuity connection, spacers and PVC (NA) tape.
Supply and fixing 20 mm dia light gauge PVC Conduit conforming to IS 9537 / 1983 part III along with all
required accessories on surface including making good the damages etc as required.
25 mm dia light gauge
Supply and fixing 20 mm dia light gauge of PVC Conduit conforming to IS 9537 / 1983 part III along with all
required accessories in recess including cutting the wall and making good the damages etc as required.
4.00 mm (8 SWG)
Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc.
as required including drilling necessary holes as required
12 x 3 mm brass bolt & nut
Supplying , threading , laying and jointing of the following sizes of 'B' class GI pipe with all required
accessories in ground in the existing trench as protective covering to earth leads.
15 mm dia
Supply and providing plate earthing as per IS 3043 with 600x600x6.30 mm GI/CI earth plate, 20 mm GI
watering pipe fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel with weld mesh, filling required
quantity of charcoal including construction of inspection chamber with a bed concrete of 1:4:8 PCC using 40
mm broken stone (10 cm thick), brick work in cement mortar 1:6, plastering the surface of brick masonry and
the exposed surface of PCC bed with cement mortar 1:4, 12 mm thick, (the finished inside dimension shall be
300 x 300 x 300 mm) but excluding test joint, earth continuity conductor to the plate, and covering at the top.
(in ordinary soil)
Supply and providing the following sizes of cast iron gully trap with covering at the top of the inspection
chamber of earth pit as required
300 x 300 x 6 mm cast iron gully trap with covering
Supply and providing test joint for the earthing system using 2 Nos of 2 x 25 x 3 mm GI strip sizes of strips
including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required.
Supply and providing earth lead from the test joint to the earth electrode using 25x3 mm G I srip of
conductors/ strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test
joint etc as required.
Main panel
Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623
(with latest amendments) using 1.60 mm CRCA sheet as per approved design and requirement, with front and
rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using
4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps,
bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, painting the assembly with
2 coats synthetic enamel paint over a coat of zinc chromate primer etc as required. CRCA sheet alone be used
for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The
measurments should be taken the area of the complete sheets used for panel board including partitions, folding,
shrouding etc. including control wiring
Supply and providing the 3 mm thick of SMC sheets in the panel as barriers & shrouding using required bolts
and nuts including cutting to shape etc., as required.
Supply and fixing the 'A' section neoprene beeding along the periphery of doors/ other detachable
compartments to make the panel assembly dust & vermin proof including sticking with glue
Fabrication, supply, conveyance and installation of base frame for floor mounting type panel board using
channel of class designation ISMC 75 including cutting, welding, drilling holes, painting with two coats of
synthetic enamel paint over a coat of zinc chromate primer, bolting the frame to the panel and to the finished
floor using required bolt and nuts, making good the damages etc. as required.
Fabrication, supply & fixing main bus bar system and interconnections with electrolytic grade copper strips/
rigid conductors conforming to IS 1867 (with latest amendments) for bus bar arrangement with single strip per
phase supported on finger type bus bar supports of adequate size, spacing between supports not exceeding 50
cm & overhang not exceeding 5 cm including bending to shape, drilling holes, tinning the points of contacts,
fixing heat shrinkable PVC sleeves, plated bolts and nuts with plate washers and spring washers, copper
sockets for round conductors, etc., as required.
Fabrication, supply & fixing earth bus system with copper strip/ conductor and connecting all accessories as
per rule including g tinning the points of contacts etc as required
160A, 25/35 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100%
with thermal magnetic release having adjustable OL
100 A, 4 pole AC 23 A duty switch disconnector unit (isolator) complete with handle assembly, door inter lock
and padlocking arrangement
63 A, 4 pole AC 23 A duty switch disconnector unit (isolator)
Three phase volt meter (V - RY, YB, BR, R, Y, B) of accuracy class 1
6 A 3 pole voltmeter selector switch to read voltage between 3 phases and neutral.
LED indicators for all voltage ranges - Blue Colour
LED indicators for all voltage ranges - Red, Green, Black, Yellow or Orange Colour
Enameled Danger Notice Board of size 150 x 100 mm. with inscriptions ( both in English and Malayalam) and
conventional Skull and Bone in Red colour.
Carrying out control wiring for panel with normal meters and indication lamps alone with 650/1100 V grade
PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for
interconnecting the control devices/ equipments including providing suitable size insulated sockets at the
termination points or soldered properly, providing numbering ferrules for the proper identification of the
wiring, keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required.-1.50 sq mm single run
with required sockets.
Supply and providing the 3 mm thick of SMC sheets in the panel as barriers & shrouding using required bolts
and nuts including cutting to shape etc., as required.
Supply and fixing the 'A' section neoprene beeding along the periphery of doors/ other detachable
compartments to make the panel assembly dust & vermin proof including sticking with glue
Fabrication, supply, conveyance and installation of base frame for floor mounting type panel board using
channel of class designation ISMC 75 including cutting, welding, drilling holes, painting with two coats of
synthetic enamel paint over a coat of zinc chromate primer, bolting the frame to the panel and to the finished
floor using required bolt and nuts, making good the damages etc. as required.
Fabrication, supply & fixing main bus bar system and interconnections with electrolytic grade copper strips/
rigid conductors conforming to IS 1867 (with latest amendments) for bus bar arrangement with single strip per
phase supported on finger type bus bar supports of adequate size, spacing between supports not exceeding 50
cm & overhang not exceeding 5 cm including bending to shape, drilling holes, tinning the points of contacts,
fixing heat shrinkable PVC sleeves, plated bolts and nuts with plate washers and spring washers, copper
sockets for round conductors, etc., as required.
Fabrication, supply & fixing earth bus system with copper strip/ conductor and connecting all accessories as
per rule including g tinning the points of contacts etc as required
63 A, AC 23 A, TPN SDF for DIN fuse
32A DP SDF
Three phase volt meter (V - RY, YB, BR, R, Y, B) of accuracy class 1
6 A 3 pole voltmeter selector switch to read voltage between 3 phases and neutral.
LED indicators for all voltage ranges - Blue Colour
LED indicators for all voltage ranges - Red, Green, Black, Yellow or Orange Colour
Enameled Danger Notice Board of size 150 x 100 mm. with inscriptions ( both in English and Malayalam) and
conventional Skull and Bone in Red colour.
Carrying out control wiring for panel with normal meters and indication lamps alone with 650/1100 V grade
PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for
interconnecting the control devices/ equipments including providing suitable size insulated sockets at the
termination points or soldered properly, providing numbering ferrules for the proper identification of the
wiring, keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required.-1.50 sq mm single run
with required sockets.
Supply and providing the 3 mm thick of SMC sheets in the panel as barriers & shrouding using required bolts
and nuts including cutting to shape etc., as required.
Supply and fixing the 'A' section neoprene beeding along the periphery of doors/ other detachable
compartments to make the panel assembly dust & vermin proof including sticking with glue
Fabrication, supply, conveyance and installation of base frame for floor mounting type panel board using
channel of class designation ISMC 75 including cutting, welding, drilling holes, painting with two coats of
synthetic enamel paint over a coat of zinc chromate primer, bolting the frame to the panel and to the finished
floor using required bolt and nuts, making good the damages etc. as required.
Fabrication, supply & fixing main bus bar system and interconnections with electrolytic grade copper strips/
rigid conductors conforming to IS 1867 (with latest amendments) for bus bar arrangement with single strip per
phase supported on finger type bus bar supports of adequate size, spacing between supports not exceeding 50
cm & overhang not exceeding 5 cm including bending to shape, drilling holes, tinning the points of contacts,
fixing heat shrinkable PVC sleeves, plated bolts and nuts with plate washers and spring washers, copper
sockets for round conductors, etc., as required.
Fabrication, supply & fixing earth bus system with copper strip/ conductor and connecting all accessories as
per rule including g tinning the points of contacts etc as required
63 A, AC 23 A, 4 pole SDF for DIN fuse
32A DP SDF
Three phase volt meter (V - RY, YB, BR, R, Y, B) of accuracy class 1
6 A 3 pole voltmeter selector switch to read voltage between 3 phases and neutral.
LED indicators for all voltage ranges - Blue Colour
LED indicators for all voltage ranges - Red, Green, Black, Yellow or Orange Colour
Enameled Danger Notice Board of size 150 x 100 mm. with inscriptions ( both in English and Malayalam) and
conventional Skull and Bone in Red colour.
Carrying out control wiring for panel with normal meters and indication lamps alone with 650/1100 V grade
PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for
interconnecting the control devices/ equipments including providing suitable size insulated sockets at the
termination points or soldered properly, providing numbering ferrules for the proper identification of the
wiring, keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required.-1.50 sq mm single run
with required sockets.
Supply and providing First Aid Chart duly framed and placed in a conspicuous location for clear vision.
Painting letters or figures of the following sizes with enamel paint as identification mark to SB, DB, panel
board etc as required
2.50 cm, 4 cm or 5 cm height
Amount
1.51 % Below estimate rate.
Total
anchayath- Electrification
7 8 9 10 11 12 13
2 129 Pts 108489.00
3 16 Pts 13168.00
3 54 Pts 80892.00
3 34 Nos 14314.00
3 3 Nos 2625.00
4 2 Nos 1122.00
M B00k No - 87 /2015
4 16 Nos 4336.00
5 8 Nos 14184.00
5 49 Nos 93835.00
5 27 Nos 46359.00
6 3 Nos 14034.00
6 15 Mtr 2970.00
7 6 Nos 101196.00
8 9 Mtr 2691.00
9 6 Nos 10968.00
9 6 Nos 1764.00
10 39 Nos 72267.00
10 15 Nos 2730.00
11 24 Nos 2976.00
11 13 Mtr 1495.00
12 27 Nos 18495.00
12 21 Nos 20349.00
13 1 Nos 110.00
M B00k No - 87 /2015
13 1 Nos 145.00
13 1 Nos 181.00
M B00k No - 8 14 3 Nos 615.00
14 4 Nos 13316.00
15 2 Nos 17968.00
15 17 Nos 32283.00
15 1 Nos 604.00
15 1 Nos 1855.00
15 1 Nos 1369.00
15 1 Nos 1751.00
15 5 Nos 4595.00
16 5 Nos 3090.00
16 4 Nos 8092.00
16 1 Nos 566.00
16 16 Nos 5472.00
16 16 Nos 32368.00
16 45 Nos 9855.00
17 40 Mtr 7440.00
17 10 Mtr 1970.00
17 15 Mtr 3465.00
17 5 Mtr 1405.00
17 10 Mtr 6000.00
18 10 Mtr 5820.00
18 15 Mtr 9345.00
19 10 Mtr 1310.00
19 34 Nos 8568.00
M B00k No - 87 /2015
20 8 Nos 2016.00
20 2 Nos 542.00
20 4 Nos 1276.00
20 2 Nos 948.00
20 2 Nos 1614.00
21 1 Nos 1335.00
21 90 Mtr 8550.00
22 30 Mtr 3600.00
22 10 Mtr 1330.00
23 140 Mtr 11340.00
23 55 Mtr 7370.00
23 110 Mtr 6710.00
23 60 Mtr 5640.00
23 20 Mtr 2520.00
23 25 Mtr 2650.00
23 410 Mtr 10660.00
24 18 Mtr 1926.00
0 0.00
25 46 Nos 690.00
25 12 Nos 228.00
25 8 Nos 184.00
25 0 0.00
25 18 Nos 203.40
M B00k No - 87 /2015
25 8 Nos 136.00
26 8 Nos 160.00
0 0.00
26 10 Mtr 900.00
27 2 Nos 7834.00
0 0.00
28 2 Nos 534.00
0.00
30 5 m2 8090.00
31 0.30 m2 1227.60
So rate
difference of Rs.
4104x1=4104
may be
deducted
33 1225 cm3 8942.50
34 1 No 8689.00
35 1 No 4064.00
35 2 No 4106.00
35 1 No 1683.00
35 1 No 459.00
36 1 No 196.00
36 2 Nos 246.00
36 1 No 136.00
37 20 Mtr 440.00
37 20 Mtr 640.00
38 10 Mtr 440.00
38 1 Mtr 1685.00
0 0.00
40 14 m2 22652.00
M B00k No - 87 /2015
41 0.80 m2 3273.60
41 50 Mtr 2700.00
42 4 Mtr 3228.00
44 1 No 2118.00
44 8 No 12944.00
44 1 No 1683.00
44 1 No 459.00
44 1 No 196.00
45 2 Nos 246.00
45 1 No 136.00
46 20 Mtr 440.00
M B00k No - 87 /2015
46 20 Mtr 640.00
M B00k No - 87 /2015 46 10 Mtr 440.00
0.00
49 14 m2 22652.00
49 0.80 m2 3273.60
50 50 Mtr 2700.00
51 4 Mtr 3228.00
53 1 No 3164.00
53 9 No 14562.00
53 1 No 1683.00
53 1 No 459.00
53 1 No 196.00
54 2 No 246.00
54 1 Nos 136.00
55 20 No 440.00
55 20 Mtr 640.00
55 10 Mtr 440.00
2 Mtr 3618.00
2 Kg 4648.00
2 Nos 312.00
1 No 204.00
0 0.00
1148001.30
17334.8196
1130666.48
Name of Work - Electrification to various Anganavadies Centre No. 63,67,68,69 ( 4Nos)
1 23 4 5
1 841.00 4 Nos
2 823.00 12 Nos
3 1498.00 4 Pts
4 421.00 8 Nos
5 271.00 12 Nos
6 1773.00 4 Nos
7 1853.00 4 Nos
8 115.00 0.8 M
9 124.00 4 Nos
10 685.00 4 Nos.
11 1572.00 4 Nos
12 566.00 4 Nos
13 2023.00 4 Nos
14 219.00 12 Nos
15 83.00 28 M
16 81.00 32 M
17 26.00 30 M
18 62.00 16 M
19 18.00 8 No
20 19.00 12 Nos
21 20.00 12 Nos
22 11.30 4 Nos
23 207.00 8 M
24 90.00 1 M
25 3917.00 4 Nos
26 267.00 4 Nos
Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator.
Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of
light points.
Supply and fixing angle / straight brass lined skirt type, bakelite batten holder with 200mm polished aluminium
shade. and normal size 5W BC / ES / E14 retrofit CFL and giving connection etc as required
Supply, conveyance, installation, testing and commissioning of pre-wired fluorescent fittings of 1x28wT5 fitting
with lamp holder, APF electronic ballast suitable for continuous operation with THD <10%, power factor >0.98,
RoHS compliant,high lumen tube . . on wall using 2 nos flat iron brackets made from 25x6 mm flat iron,
painting the flat iron brackets and giving connection with required length of 16/0.20mm 3 core round copper
conductor flex wire conforming to relevant ISS or extending the original wiring and giving connections etc. a
required.
Supply, conveyance, installation, testing and commissioning of ceiling fans of 1200 mm sweep 5 star (Category
B) sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm
PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended
original wiring etc. as required.
Supply and providing every additional length of down rod of suitable size heavy gauge GI / WI pipe with
16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming in relevant
ISS or with original wiring extended including painting as required.
Supply and installation of suitable size MS rod type fan clamp as per IS 732 as required.
Supply & Fixing 3 module metal boxwith white / off white front plate suitable for modular accessories in
recess including supply and providing 1no 20 A combined shutttered socket and 1 no 20 A 1way SP switch
with indicator, making good the damages, colour washing etc as required (Group B) (ROHS)
Supply and installation of 8 way single phase double cover (IP 42/43) sheet steel, phosphatised and painted,
dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail
suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including
cutting hole on the wall , making good the damages, colour washing etc. as required
6 A to 32 A, 10 kA, DP MCB (C curve)
25 A, 2 pole, 30 mA RCCB
Supply and fixing 20 mm dia light gauge PVC Conduit conforming to IS 9537 / 1983 part III along with all
required accessories on surface including making good the damages etc as required.
Supply and drawing 2.50 sq mm 2 run 650/1100 V grade PVC insulated stranded single core copper conductor
cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving
necessary connections
Supply and drawing bare earthing conductors of 2.00 mm copper conductor (14 SWG) size along with wiring/
cables and giving connection as required.
3.15 mm copper conductor (10 SWG)
supply of superior quality copper earth socket for 2.00 mm (14 SWG) sizes of earth conductor including
crimping etc. as required.
2.65/3.15 mm (10/12 SWG)
Supply and providing 25 x 6 mm brass bolt and nut with washers on the existing MS box / earth bus etc. as
required including drilling necessary holes as required
12x3 mm brass bolt & nut
Supply and clamping 25 mm of "B" class GI pipe on wall with all required accessories & clamps etc., including
cutting and making good the walls, painting the exposed portions etc., as protective covering to earth leads /
cables.
Supplying , threading , laying and jointing of 15 mm of 'B' class GI pipe with all required accessories in ground
in the existing trench as protective covering to earth leads.
Supply and providing plate earthing as per IS 3043 with 600x600x6.30 mm GI/CI earth plate, 20 mm GI
watering pipe fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel with weld mesh, filling required
quantity of charcoal including construction of inspection chamber with a bed concrete of 1:4:8 PCC using 40
mm broken stone (10 cm thick), brick work in cement mortar 1:6, plastering the surface of brick masonry and
the exposed surface of PCC bed with cement mortar 1:4, 12 mm thick, (the finished inside dimension shall be
300 x 300 x 300 mm) but excluding test joint, earth continuity conductor to the plate, and covering at the top. (in
ordinary soil)
Supply and providing the following sizes of cast iron gully trap with covering at the top of the inspection
chamber of earth pit as required
Supply and providing test joint for the earthing system using 2 Nos of 2 x 25 x 3 mm GI strip sizes of strips
including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required.
Supply and providing earth lead from the test joint to the earth electrode using 25x3 mm G I srip of conductors/
strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test joint etc as
required.
Supply and fixing sintex make PVC meter box (GSMB -3525 ) for fixing 1 phase energy meter, on wall
using suitable size anchor bolts grouted on wall, making good the damages, including supply and providing 1
No. 32 A Bakelite fuse holder for BS type 1 nos blade fuses with 25 A clip on offset tag fuse link,and 1 No 20
A 2 way N/L
Amount
Limited to Rs.
r Shornur Muncipality
7 8 9 10 11 12 13
2 4 Nos 3364.00
M B00k No - 233 /16-17
3 18 Nos 14814.00
3 4 Pts 5992.00
3 8 Nos 3368.00
4 18 Nos 4878.00
4 4 Nos 7092.00
5 4 Nos 7412.00
6 0.0 M 0.00
6 4 Nos 496.00
M B00k No - 233 /16-17
7 4 Nos 2740.00
.
7 4 Nos 6288.00
8 4 Nos 2264.00
8 4 Nos 8092.00
8 12 Nos 2628.00
8 26 M 2158.00
9 27.65 M 2239.65
9 26.80 M 696.80
9 30.4 M 1884.80
9 8 No 144.00
10 8 Nos 152.00
10 4 Nos 80.00
10 4 Nos 45.20
10 0 M 0.00
11 0 M 0.00
12 4 Nos 15668.00
12 4 Nos 1068.00
101409.65
96628.00
Name of Work - Electrification for vanitha Vyavasaya Samuchayam at kulapully un
1 23 4 5
1 841.00 9 Pts
2 823.00 4 Pts
3 1498.00 3 Pts
4 421.00 3 Nos
5 271.00 4 Nos
6 1773.00 1 Nos
7 1915.00 6 Nos
8 198.00 2 Mtr
9 294.00 2 Nos
10 2629.00 2 Nos
11 1853.00 3 Nos
13 124.00 2 Nos
12 182.00 1 No
14 115.00 2 Mtr
15 685.00 2 Nos
16 1572.00 1 No
17 342.00 1 No
18 2023.00 1 No
19 219.00 4 Nos
20 83.00 50 Mtr
21 95.00 10 Mtr
22 119.00 10 Mtr
23 81.00 30 Mtr
24 134.00 15 Mtr
25 134.00 5 Mtr
26 106.00 10 Mtr
27 326.00 10 Mtr
28 26.00 60 Mtr
29 43.00 10 Mtr
30 62.00 30 Mtr
31
32 77.00 10 Mtr
33
34 18.00 4 Nos
35 19.00 6 Nos
36
37 11.30 2 Nos
38 20.00 4 Nos
39
40 90.00 10 Mtr
41 3917.00 2 Nos
42
43 267.00 2 Nos
46 54939.00 1 No
Name of Work - Electrification for vanitha Vyavasaya Samuchayam at kulapully under shornur muncipality
6
Supply and wiring points according to IS 732-1989 using rigid PVC ivory conduit of minimum size 20 mm
conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the
conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC
insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main
,and continuous earthing with 2.00 mm copper conductor (14 SWG) size along with wiring/ cables and giving
connection , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size
modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular
typeROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the
terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the
periphery of the box using suitable ties, tie mounts etc as required.
Supply, conveyance, installation, testing and commissioning of ceiling fans of 1200 mm sweep 5 star (Category
B) sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm
PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended
original wiring etc. as required.
Supply and installation of suitable size MS rod type fan clamp as per IS 732 as required.
Supply and installation of suitable size MS belt type fan clamp fabricated from MS flat (2 pieces) as per IS 732
as required.
Supply and providing every additional length of down rod of suitable size heavy gauge GI / WI pipe with
16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming in relevant
ISS or with original wiring extended including painting as required.
Supply & Fixing 3 module metal boxwith white / off white front plate suitable for modular accessories in
recess including supply and providing 1no 20 A combined shutttered socket and 1 no 20 A 1way SP switch
with indicator, making good the damages, colour washing etc as required (Group B) (ROHS)
Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB
including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed
on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required 8 way single phase double cover (IP 42/43)
Supply and fixing 20 mm dia light gauge PVC Conduit conforming to IS 9537 / 1983 part III along with all
required accessories on surface including making good the damages etc as required.
25 mm dia light gauge
32 mm dia light gauge
Supply and drawing 2.50 sq mm 2 run 650/1100 V grade PVC insulated stranded single core copper conductor
cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving
necessary connections
2.50 sq mm 2 run
2.50 sq mm 4 run
4.00 sq mm 2 run
10.00 sq mm 3 run
Supply and drawing bare earthing conductors of 2.00 mm copper conductor (14 SWG) size along with wiring/
cables and giving connection as required.
2.65 mm copper conductor (12 SWG)
3.15 mm copper conductor (10 SWG)
Supply and laying bare earthing conductors of the following sizes laid 0.6 m below ground level including
excavating trench of suitable size and refilling etc. as required (in ordinary soil).
3.15 mm copper conductor (10 SWG)
supply of superior quality copper earth socket for the following sizes of earth conductor including crimping etc.
as required.
2.00 mm (14 SWG)
Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as
required including drilling necessary holes as required
12 x 3mm brass bolt & nut
Supply and providing the following sizes of cast iron gully trap with covering at the top of the inspection
chamber of earth pit as required
300 x 300 x 6 mm cast iron gully trap with covering
Supply and providing test joint for the earthing system using 2 Nos of 2 x 25 x 3 mm GI strip sizes of strips
including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required.
Supply and providing earth lead from the test joint to the earth electrode using 25x3 mm G I srip of conductors/
strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test joint etc as
required.
Supply,conveyance, installation testing and commissioning of cubicle type panel board for 20HP comprising of
LED Indicating lamp RYG -1 set
Voltmeter with Selector Switch-1 set
Ammeter with CTs-1 set
Control Fuse with HRC Fuse -1 set
C&S ELCB 63A FP 300MA -1 No
Power Capacitor 7.5 KVAr -1 No
Single Phase Preventer- 1 No
L&T 100A Cubicle Switch -1 No
L&T/ BCH Stardelta Starter- 1No
63A Reverse Forward Switch -1 No
Meter Board outdoor type with 100A Bakelite Fuse with HRC Fuse and Neutral Link
complete with standard accessaries and giving connections etc as required. Make L & T/ C& S / Equivalent
Total
Deduct Item No- 6 of Rs.
G.total
rnur muncipality
7 8 9 10 11 12 13
2 9 Pts 7569.00
M B00k No - 234
3 4 Pts 3292.00
3 3 Pts 4494.00
3 4 Nos 1684.00
4 4 Nos 1084.00
5 0 Nos 0.00
5 0 Mtr 0.00
5 2 Nos 588.00
6 2 Nos 5258.00
M B00k No - 658 /15-16
7 3 Nos 5559.00
7 0 Nos 0.00
7 1 No 182.00
MB 8 0 Mtr 0.00
8 2 Nos 1370.00
9 1 No 1572.00
9 1 No 342.00
9 1 No 2023.00
9 4 Nos 876.00
11 0 Mtr 0.00
11 6.7 Mtr 897.80
11 0 Mtr 0.00
11 25 Mtr 8150.00
11 19.1 Mtr 496.60
12 4 Nos 72.00
12 6 Nos 114.00
0 0.00
12 2 Nos 22.60
12 4 Nos 80.00
0 0.00
13 8 Mtr 720.00
14 2 Nos 7834.00
0 0.00
14 2 Nos 534.00
17 1 No 54939.00
129172.00
224.00
128948.00
Name of Work - Electrification to the Additional Block of Lakkidi Perur Grama
1 23 4 5
1 841.00 23 Pts
2 823.00 2 Pts
3 1498.00 9 Pts
4 875.00 1 Pts
5 421.00 5 Pts
6 377.00 2 Nos
7 350.00 1 N
8 1773.00 2 Nos
9 1915.00 16 Nos
10 1717.00 3 Nos
11 198.00 5 Mtr
13 4487.00 1 No
12 274.00 1.5 Mtr
14 1853.00 9 Nos
16 124.00 2 Nos
15 182.00 7 Nos
17 680.00 4 Nos
18 979.00 8 Nos
19 3329.00 1 Nos
20 1572.00 1 Nos
21 618.00 1 Nos
22 2744.00 1 Nos
23 561.00 1 Nos
24 219.00 18 Nos
25 83.00 100 M
26 95.00 25 M
27 61.00 40 M
28 94.00 25 M
29 126.00 15 M
30 81.00 25 M
31 134.00 15 M
32 106.00 10 M
33 197.00 25 M
34 179.00 10 M
35 339.80 2 Nos
36 26.00 130 M
37 43.00 70 M
38 18.00 24 Nos
39 19.00 2 Nos
40 20.00 2 Nos
41 11.30 12 Nos
42 230.00 5 M
Name of Work - Electrification to the Additional Block of Lakkidi Perur Grama Panchayath Office
6
Supply and wiring points according to IS 732-1989 using rigid PVC ivory conduit of minimum size 20 mm
conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the
conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC
insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main
,and continuous earthing with 2.00 mm copper conductor (14 SWG) size along with wiring/ cables and giving
connection , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size
modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular
typeROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the
terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the
periphery of the box using suitable ties, tie mounts etc as required.
Call bell point with piano type 6A bell push at one end and 6A, 3 plate ceiling rose at other end
Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of
light points.
Supply and fixing angle / straight brass lined skirt type, bakelite batten holder with 200mm polished aluminium
shade. and 9 w to 11 W LED lamp and giving connection etc as required
Supply and fixing the following types of superior quality 250V A.C call bell on suitable sizeM.S. box and giving
connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed
round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the
MS box and making good the surface as required.
Supply, conveyance, installation, testing and commissioning of pre-wired fluorescent fittings of 1x28wT5 fitting
with lamp holder, APF electronic ballast suitable for continuous operation with THD <10%, power factor >0.98,
RoHS compliant,high lumen tube . . on wall using 2 nos flat iron brackets made from 25x6 mm flat iron,
painting the flat iron brackets and giving connection with required length of 16/0.20mm 3 core round copper
conductor flex wire conforming to relevant ISS or extending the original wiring and giving connections etc. a
required.
Supplying and providing extra H.G conduit down rod of 19 mm dia 2 x 1.00 m long with 16/0.20 mm 3 core
copper conductor flex wire conforming to relevant ISS or with the extended original wiring and giving
connection etc. as required.
Supply, conveyance, installation, testing and commissioning of pre-wired light fitting of LED Street light fitting
IP 65 BRP022 LED 21CW MR S1 PSUGR PHILIPS /equivalent with all accesesories complete with all
accessories and lamps etc. in the existing GI pipe and giving connections with required length of 16/0.20mm 3
core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving
connection etc. as required.
Supply, fabrication, conveyance and fixing 25 mm dia with HG company fabricated clamps of B class GI pipe
bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with
each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the
damages, colour washing etc as required (for the installation of outdoor light fittings).
Supply, conveyance, installation, testing and commissioning of ceiling fans of 1400 mm sweep 5 star (Category
B) sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm
PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended
original wiring etc. as required.
Supply and installation of suitable size MS rod type fan clamp as per IS 732 as required.
Supply and installation of suitable size MS belt type fan clamp fabricated from MS flat (2 pieces) as per IS 732
as required.
Supply & Fixing 3 module metal box with white /off white front plate suitable for modular accessories in
recess including supply and providing 1no 6/16A combined shutttered socket and 1 no 16A 1way SP switch
with indicator, making good the damages, colour washing etc. as required (Group B) (ROHS)
Supply and fixing 3 Nos 6A Modular shuttered type plug socket controlled by 1 No 6A modular switch on 8
module modulat metal box with white front plate, earthing make good the damages color washing etc as required
on surfaces/recess as power plug(Group B)(ROHS)
Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB
including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed
on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the
damages, colour washing etc. as required Three Phase 4way MCB DB
Supply and fixing 20 mm dia light gauge PVC Conduit conforming to IS 9537 / 1983 part III along with all
required accessories on surface including making good the damages etc as required.
25 mm dia light gauge
Supply and drawing 1.50 sq mm 2 run 650/1100 V grade PVC insulated stranded single core copper conductor
cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving
necessary connections
1.50 sq mm 4 run
1.50 sq mm 6 run
2.50sq mm 2 run
2.50 sq mm 4 run
4 sq mm 2 run
Supply, laying and clamping of 1 no.4 core 10 sq mm with factory made clampPVC insulated and PVC sheathed
armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables,
spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.
Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV
grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 x 10
Supplying siemens / tropodur type nickel plated single compression brass cable gland for PVC insulated and
PVC sheathed armoured aluminium/ copper conductor cable 1.1 KV grade, and making end termination suitable
for 2/ 3/ 3/ 4 core cable required. 4x10
Supply and drawing bare earthing conductors of 2.00 mm copper conductor (14 SWG) size along with wiring/
cables and giving connection as required.
2.65 mm copper conductor (12 SWG)
supply of superior quality copper earth socket for 2.00 mm (14 SWG) sizes of earth conductor including
crimping etc. as required.
2.65/3.15 mm (10/12 SWG)
Supply and providing 25 x 6 mm brass bolt and nut with washers on the existing MS box / earth bus etc. as
required including drilling necessary holes as required
12x3 mm brass bolt & nut
Supply and clamping 32mm of 'B' class GI pipe on wall required accessories & clamps etc., including cutting
and making good the walls, painting the exposed portions etc., as service pipe
Total
R (-)_
G.total
ayath Office
7 8 9 10 11 12 13
2 24 Pts 20184.00
M B00k No - LPGP/06/16-17
2 5 Pts 4115.00
3 10 Pts 14980.00
3 0 Pts 0.00
3 10 Pts 4210.00
4 5 Nos 1885.00
4 0 N 0.00
5 2 Nos 3546.00
5 18 Nos 34470.00
5 1 Nos 1717.00
6 0 No 0.00
M B00k No - LPG 7 0 Mtr 0.00
8 9 Nos 16677.00
8 0 Nos 0.00
8 10 Nos 1820.00
9 4 Nos 2720.00
9 10 Nos 9790.00
10 1 Nos 3329.00
10 1 Nos 1572.00
10 2 Nos 1236.00
10 1 Nos 2744.00
10 1 Nos 561.00
10 18 Nos 3942.00
11 119.3 M 9901.90
11 0 M 0.00
12 60.45 M 3687.45
12 17.2 M 1616.80
12 7.1 M 894.60
12 42 M 3402.00
12 5.6 M 750.40
12 0 M 0.00
13 26 M 5122.00
13 0 M 0.00
13 2 Nos 679.60
13 122.8 M 3192.80
14 52 M 2236.00
14 24 Nos 432.00
14 2 Nos 38.00
14 2 Nos 40.00
14 12 Nos 135.60
15 2 M 460.00
163156.35
0.35
163156.00
Name of Work - Construction of office cum shopping complex under Vallappuzha Gram
1 23 4 5
1 841.00 129 Pts
2 823.00 16 Pts
3 1498.00 54 Pts
4 421.00 34 Nos
5 875.00 3 Nos
6 561.00 2 Nos
7 271.00 16 Nos
8 1773.00 8 Nos
9 1915.00 49 Nos
10 1717.00 27 Nos
11 4678.00 3 Nos
12 198.00 15 Mtr
13 16866.00 6 Nos
14 299.00 9 Mtr
15 1828.00 6 Nos
16 294.00 6 Nos
17 1853.00 39 Nos
18 182.00 15 Nos
19 124.00 24 Nos
20 115.00 13 Mtr
21 685.00 27 Nos
22 969.00 21 Nos
23 110.00 1 Nos
24 145.00 1 Nos
25 181.00 1 Nos
26 205.00 3 Nos
27 3329.00 4 Nos
28 8984.00 2 Nos
29 1899.00 17 Nos
30 604.00 1 Nos
31 1855.00 1 Nos
32 1369.00 1 Nos
33 1751.00 1 Nos
34 919.00 5 Nos
35 618.00 5 Nos
36 2023.00 4 Nos
37 566.00 1 Nos
38 342.00 16 Nos
39 2023.00 16 Nos
40 219.00 45 Nos
41 157.00 210 Mtr
42 186.00 40 Mtr
43 197.00 10 Mtr
44 231.00 15 Mtr
45 281.00 5 Mtr
46 600.00 10 Mtr
47 582.00 10 Mtr
48 623.00 15 Mtr
49 131.00 10 Mtr
50 252.00 34 Nos
51 252.00 8 Nos
52 271.00 2 Nos
53 319.00 4 Nos
54 474.00 2 Nos
55 807.00 2 Nos
56 1335.00 1 Nos
58 95.00 90 Mtr
59 120.00 30 Mtr
60 133.00 10 Mtr
61 81.00 140 Mtr
62 134.00 55 Mtr
63 61.00 110 Mtr
64 94.00 60 Mtr
65 126.00 20 Mtr
66 106.00 25 Mtr
67 26.00 410 Mtr
A 107.00 18 Mtr
72
a 15.00 46 Nos
b 19.00 12 Nos
c 23.00 8 Nos
73
a 11.30 18 Nos
b 17.00 8 Nos
c 20.00 8 Nos
74
a 90.00 10 Mtr
75 3917.00 2 Nos
76
a 267.00 2 Nos
77 165.00 0.6 Mtr
79 1618.00 5 m2
80 4092.00 0.30 m2
81 54.00 25 Mtr
82 807.00 4 Mtr
85 8969.00 1 Nos
86 4064.00 1 Nos
87 2053.00 2 Nos
88 1683.00 1 Nos
89 459.00 1 Nos
90 196.00 1 Nos
91 123.00 2 Nos
92 136.00 1 Nos
93 22.00 20 Mtr
94 32.00 20 Mtr
95 44.00 10 Mtr
96 1685.00 1 Nos
97 1618.00 14 m2
98 4092.00 0.80 m2
99 54.00 50 Mtr
113 1618.00 14 m2
Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of
light points.
Call bell point with piano type 6 A bell push at one end and 6 A, 3 plate ceiling rose at other end
Independent plug
Supply and fixing angle / straight brass lined skirt type, bakelite batten holder with 200mm polished aluminium
shade. and normal size 5W BC / ES / E14 retrofit CFL and giving connection etc as required
Supply, conveyance, installation, testing and commissioning of pre-wired light fitting of 1x28wT5 fitting with
APF electronic ballast suitable for continuous operation with THD <10%, power factor >0.98, RoHS
compliant,high lumen tube . made of CRCA sheet of .5mm thickness complete with all accessories and lamps
etc. directly on wall using 2 nos. flat iron brackets made from 25x6mm flat iron, painting the flat iron bracket
and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to
relevant ISS or extending the original wiring and giving connection etc. as required.
Supply, conveyance, installation, testing and commissioning of the following sizes of exhaust fans in the existing
opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections
with required length of 24/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire
conforming to relevant ISS.- 300/ 305 mm, single phase light duty exhaust fan in metal frame
Charges for cutting holes suitable for accommodating exhaust fans of sizes up to 305 mm sweep including
plastering, colour washing etc. as required.
Supply, conveyance, installation, testing and commissioning of ceiling fans of 1200 mm sweep 5 star (Category
B) sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm
PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended
original wiring etc. as required.
Supply and installation of suitable size MS belt type fan clamp fabricated from MS flat (2 pieces) as per IS 732
as required.
Supply and installation of suitable size MS rod type fan clamp as per IS 732 as required.
Supply and providing every additional length of down rod of suitable size heavy gauge GI / WI pipe with
16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming in relevant
ISS or with original wiring extended including painting as required.
Supply & Fixing 3 module metal boxwith white / off white front plate suitable for modular accessories in
recess including supply and providing 1no 16/20 A combined shutttered socket and 1 no 20 A 1way SP switch
with indicator, making good the damages, colour washing etc as required (Group B) (ROHS)
Supply and fixing 3 Nos 6A Modular shuttered type plug socket controlled by 1 No 6A modular switch on 8
module modular metal box with white front plate, earthing make good the damages colour washing etc as
required on surfces/reces as power plug (Group B)(ROHS)
Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving
connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed
round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the
MS box and making good the surface as required. - Buzzer
Call bell
Ding Dong bell
Supplying and fixing the following sizes of M.S. Boxes made out of 1.60 mm thick sheet painted grey (both
inside and outside ) in surface/ recess including phenolic laminated sheet covers of thicknesses noted along with
screwed to the box as front cover with steel screws, cup washers etc. making good the surface, painting /colour
washing etc. as required. -100 mm x 150 mm x 50mm with 3 mm sheet
Supply and installation of 4 way three phase double cover (IP 42/43) sheet steel, phosphatised and painted,
dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail
suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including
cutting hole on the wall , making good the damages, colour washing etc. as required
4 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as
outgoing (IP 42/43)
12 way single phase double cover (IP 42/43)
FP enclosure for independent mounting of MCB/ RCCB/ RCBO
63 A, 10 kA, 4 pole MCB (D curve)
40 A, 10 kA, TP MCB (C curve)
40 A, 10 kA, 4 pole MCB (C curve)
6 A to 25 A, 10 kA, TP MCB (C curve)
25 A four pole mini break isolator
25 A, 4 pole, 30 mA RCCB
6 A to 25 A, 10 kA, DP MCB (C curve)
25 A double pole mini break isolator
25 A, 2 pole, 30 mA RCCB
6 A to 32 A, 10 kA, SP MCB (C curve)
Supply, laying and clamping of 2 core 6 sq mm with factory made clampPVC insulated and PVC sheathed
armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables,
spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.
Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE
conforming to IS 14930 Part II for mechanical protection to underground power cables with all required
accessories in ground in the existing trench - 63 / 50 mm or nearest size
Supplying siemens / tropodur type nickel plated single compression brass cable gland for PVC insulated and
PVC sheathed armoured aluminium/ copper conductor cable 1.1 KV grade, and making end termination suitable
for 2/ 3/ 3/ 4 core cable required. 2x6 sq mm
4x6 sq mm
4x10 sq mm
4x16 sq mm
4x25 sq mm
3.5x95 sq mm
Supply and making outdoor / indoor end termination for 1.1 KV grade PVC/PILC/XLPE cables of 3.5 core 95 sq
mm including supply of end sealing kit consisting of cable jointing compound, hardener, plastic mould,
adhesive-cum-solvent, epoxy putty, earth continuity connection, spacers and PVC (NA) tape.
Supply and fixing 20 mm dia light gauge PVC Conduit conforming to IS 9537 / 1983 part III along with all
required accessories on surface including making good the damages etc as required.
25 mm dia light gauge
Supply and fixing 20 mm dia light gauge of PVC Conduit conforming to IS 9537 / 1983 part III along with all
required accessories in recess including cutting the wall and making good the damages etc as required.
Supply and providing the following sizes of cast iron gully trap with covering at the top of the inspection
chamber of earth pit as required
300 x 300 x 6 mm cast iron gully trap with covering
Supply and providing test joint for the earthing system using 2 Nos of 2 x 25 x 3 mm GI strip sizes of strips
including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required.
Supply and providing earth lead from the test joint to the earth electrode using 25x3 mm G I srip of conductors/
strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test joint etc as
required.
Main panel
Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623
(with latest amendments) using 1.60 mm CRCA sheet as per approved design and requirement, with front and
rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4
sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps,
bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, painting the assembly with 2
coats synthetic enamel paint over a coat of zinc chromate primer etc as required. CRCA sheet alone be used for
the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The
measurments should be taken the area of the complete sheets used for panel board including partitions, folding,
shrouding etc. including control wiring
Supply and providing the 3 mm thick of SMC sheets in the panel as barriers & shrouding using required bolts
and nuts including cutting to shape etc., as required.
Supply and fixing the 'A' section neoprene beeding along the periphery of doors/ other detachable compartments
to make the panel assembly dust & vermin proof including sticking with glue
Fabrication, supply, conveyance and installation of base frame for floor mounting type panel board using
channel of class designation ISMC 75 including cutting, welding, drilling holes, painting with two coats of
synthetic enamel paint over a coat of zinc chromate primer, bolting the frame to the panel and to the finished
floor using required bolt and nuts, making good the damages etc. as required.
Fabrication, supply & fixing main bus bar system and interconnections with electrolytic grade copper strips/
rigid conductors conforming to IS 1867 (with latest amendments) for bus bar arrangement with single strip per
phase supported on finger type bus bar supports of adequate size, spacing between supports not exceeding 50 cm
& overhang not exceeding 5 cm including bending to shape, drilling holes, tinning the points of contacts, fixing
heat shrinkable PVC sleeves, plated bolts and nuts with plate washers and spring washers, copper sockets for
round conductors, etc., as required.
Fabrication, supply & fixing earth bus system with copper strip/ conductor and connecting all accessories as per
rule including g tinning the points of contacts etc as required
160A, 25/35 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100%
with thermal magnetic release having adjustable OL
100 A, 4 pole AC 23 A duty switch disconnector unit (isolator) complete with handle assembly, door inter lock
and padlocking arrangement
63 A, 4 pole AC 23 A duty switch disconnector unit (isolator)
Three phase volt meter (V - RY, YB, BR, R, Y, B) of accuracy class 1
6 A 3 pole voltmeter selector switch to read voltage between 3 phases and neutral.
LED indicators for all voltage ranges - Blue Colour
LED indicators for all voltage ranges - Red, Green, Black, Yellow or Orange Colour
Enameled Danger Notice Board of size 150 x 100 mm. with inscriptions ( both in English and Malayalam) and
conventional Skull and Bone in Red colour.
Carrying out control wiring for panel with normal meters and indication lamps alone with 650/1100 V grade
PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for
interconnecting the control devices/ equipments including providing suitable size insulated sockets at the
termination points or soldered properly, providing numbering ferrules for the proper identification of the wiring,
keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required.-1.50 sq mm single run with
required sockets.
Supply and providing the 3 mm thick of SMC sheets in the panel as barriers & shrouding using required bolts
and nuts including cutting to shape etc., as required.
Supply and fixing the 'A' section neoprene beeding along the periphery of doors/ other detachable compartments
to make the panel assembly dust & vermin proof including sticking with glue
Fabrication, supply, conveyance and installation of base frame for floor mounting type panel board using
channel of class designation ISMC 75 including cutting, welding, drilling holes, painting with two coats of
synthetic enamel paint over a coat of zinc chromate primer, bolting the frame to the panel and to the finished
floor using required bolt and nuts, making good the damages etc. as required.
Fabrication, supply & fixing main bus bar system and interconnections with electrolytic grade copper strips/
rigid conductors conforming to IS 1867 (with latest amendments) for bus bar arrangement with single strip per
phase supported on finger type bus bar supports of adequate size, spacing between supports not exceeding 50 cm
& overhang not exceeding 5 cm including bending to shape, drilling holes, tinning the points of contacts, fixing
heat shrinkable PVC sleeves, plated bolts and nuts with plate washers and spring washers, copper sockets for
round conductors, etc., as required.
Fabrication, supply & fixing earth bus system with copper strip/ conductor and connecting all accessories as per
rule including g tinning the points of contacts etc as required
63 A, AC 23 A, TPN SDF for DIN fuse
32A DP SDF
Three phase volt meter (V - RY, YB, BR, R, Y, B) of accuracy class 1
6 A 3 pole voltmeter selector switch to read voltage between 3 phases and neutral.
LED indicators for all voltage ranges - Blue Colour
LED indicators for all voltage ranges - Red, Green, Black, Yellow or Orange Colour
Enameled Danger Notice Board of size 150 x 100 mm. with inscriptions ( both in English and Malayalam) and
conventional Skull and Bone in Red colour.
Carrying out control wiring for panel with normal meters and indication lamps alone with 650/1100 V grade
PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for
interconnecting the control devices/ equipments including providing suitable size insulated sockets at the
termination points or soldered properly, providing numbering ferrules for the proper identification of the wiring,
keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required.-1.50 sq mm single run with
required sockets.
Supply and providing the 3 mm thick of SMC sheets in the panel as barriers & shrouding using required bolts
and nuts including cutting to shape etc., as required.
Supply and fixing the 'A' section neoprene beeding along the periphery of doors/ other detachable compartments
to make the panel assembly dust & vermin proof including sticking with glue
Fabrication, supply, conveyance and installation of base frame for floor mounting type panel board using
channel of class designation ISMC 75 including cutting, welding, drilling holes, painting with two coats of
synthetic enamel paint over a coat of zinc chromate primer, bolting the frame to the panel and to the finished
floor using required bolt and nuts, making good the damages etc. as required.
Fabrication, supply & fixing main bus bar system and interconnections with electrolytic grade copper strips/
rigid conductors conforming to IS 1867 (with latest amendments) for bus bar arrangement with single strip per
phase supported on finger type bus bar supports of adequate size, spacing between supports not exceeding 50 cm
& overhang not exceeding 5 cm including bending to shape, drilling holes, tinning the points of contacts, fixing
heat shrinkable PVC sleeves, plated bolts and nuts with plate washers and spring washers, copper sockets for
round conductors, etc., as required.
Fabrication, supply & fixing earth bus system with copper strip/ conductor and connecting all accessories as per
rule including g tinning the points of contacts etc as required
63 A, AC 23 A, 4 pole SDF for DIN fuse
32A DP SDF
Three phase volt meter (V - RY, YB, BR, R, Y, B) of accuracy class 1
6 A 3 pole voltmeter selector switch to read voltage between 3 phases and neutral.
LED indicators for all voltage ranges - Blue Colour
LED indicators for all voltage ranges - Red, Green, Black, Yellow or Orange Colour
Enameled Danger Notice Board of size 150 x 100 mm. with inscriptions ( both in English and Malayalam) and
conventional Skull and Bone in Red colour.
Carrying out control wiring for panel with normal meters and indication lamps alone with 650/1100 V grade
PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for
interconnecting the control devices/ equipments including providing suitable size insulated sockets at the
termination points or soldered properly, providing numbering ferrules for the proper identification of the wiring,
keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required.-1.50 sq mm single run with
required sockets.
Supply and providing First Aid Chart duly framed and placed in a conspicuous location for clear vision.
Painting letters or figures of the following sizes with enamel paint as identification mark to SB, DB, panel board
etc as required
3 34 E 14314.00 E
3 1 E 875.00 E
4 0 E 0.00 E
4 15 E 4065.00 E
5 8 E 14184.00 E
5 45 E 86175.00 E
5 25 E 42925.00 E
6 0 E 0.00 E
6 9 m 1782.00 m
M B00k No - 87 / 2015
7 6 E 101196.00 E
M B00k 8 9 M 2691.00 M
9 4 E 7312.00 E
9 4 E 1176.00 E
10 38 E 70414.00 E
10 0 E 0.00 E
11 15 E 1860.00 E
11 6 M 690.00 M
M B00k No - 87 / 2015
12 26 E 17810.00 E
12 0 E 0.00 E
13 0 E 0.00 E
13 0 E 0.00 E
13 0 E 0.00 E
14 0 E 0.00 E
M B00k No - 87 / 2015
14 4 E 13316.00 E
15 2 E 17968.00 E
M B00k No - 15 15 E 28485.00 E
15 0 E 0.00 E
15 0 E 0.00 E
5 0 E 0.00 E
15 1 E 1751.00 E
15 5 E 4595.00 E
16 4 E 2472.00 E
16 4 E 8092.00 E
16 0 E 0.00 E
16 15 E 5130.00 E
16 15 E 30345.00 E
16 45 E 9855.00 E
17 210 M 32970.00 M
17 0 m 0.00 m
17 10 m 1970.00 m
17 15 m 3465.00 m
17 5 m 1405.00 m
17 0 m 0.00 m
18 0 m 0.00 m
18 0 m 0.00 m
19 0 M 0.00 M
19 30 E 7560.00 E
20 0 E 0.00 E
20 2 E 542.00 E
20 4 E 1276.00 E
20 2 E 948.00 E
20 0 E 0.00 E
21 0 E 0.00 E
21 185 M 15355.00 M
21 0 m 0.00 m
22 0 m 0.00 m
22 0 m 0.00 m
23 138.7 M 11234.70 M
23 23.6 m 3162.40 m
23 0 m 0.00 m
23 0 m 0.00 m
23 0 m 0.00 m
23 0 m 0.00 m
23 410 M 10660.00 M
24 60 m 2580.00 m
24 0 m 0.00 m
24 0 m 0.00 m
0.00
24 0 m 0.00 m
0.00
25 46 E 690.00 E
25 12 E 228.00 E
25 0 E 0.00 E
0.00
25 18 E 203.40 E
25 0 E 0.00 E
26 0 E 0.00 E
0.00
26 0 m 0.00 m
27 0 E 0.00 E
0.00
28 0 E 0.00 E
28 0 M 0.00 M
28 0.0 M 0.00 M
0.00
30 5 m2 8090.00 m2
31 0.22 m2 900.24 m2
31 14 M 756.00 M
32 0 M 0.00 M
34 1 E 8969.00 E
35 1 E 4064.00 E
35 0 E 0.00 E
35 1 E 1683.00 E
35 1 E 459.00 E
36 1 E 196.00 E
36 2 E 246.00 E
36 0 E 0.00 E
37 15 M 330.00 M
37 0 M 0.00 M
38 0 M 0.00 M
38 1 E 1685.00 E
0.00
40 12.8 m2 20710.40 m2
41 0.40 m2 1636.80 m2
41 35 M 1890.00 M
42 4 M 3228.00 M
44 1 E 2118.00 E
44 7 E 11326.00 E
44 1 E 1683.00 E
44 1 E 459.00 E
44 1 E 196.00 E
45 2 E 246.00 E
45 1 E 136.00 E
46 10 M 220.00 M
46 0 M 0.00 M
46 0 M 0.00 M
0.00
49 13 m2 21034.00 m2
49 0.29 m2 1186.68 m2
50 30 M 1620.00 M
51 4 M 3228.00 M
53 0 E 0.00 E
53 9 E 14562.00 E
53 1 E 1683.00 E
53 1 E 459.00 E
53 1 E 196.00 E
54 2 E 246.00 E
54 0 E 0.00 E
55 9 M 198.00 M
55 0 M 0.00 M
55 0 M 0.00 M
55 0 m2 0.00 m2
55 0 E 0.00 E
55 0 E 0.00 E
55 0 E 0.00 E
0.00
55 0 E 0.00 E
919565.12
13885.43
905679.69
0.31
905680.00
Name of Work - Dist.Pt.pkd-2016-17 -Electrification to the Harisree building at GHSS Kottay
1 23 4 5
1 841.00 49 Nos
2 1498.00 23 Nos
3 421.00 5 Nos
4 561.00 5 Pts
5 875.00 1 No
6 1490.00 1 No
7 413.00 1 No
8 2868.00 38 Nos
9 2726.00 9 Nos
10 4061.00 2 Nos
11 274.00 3 Mtr
12 1853.00 23 Nos
13 115.00 6 Mtr
14 198.00 7 Mtr
15 124.00 20 Nos
16 182.00 3 Nos
17 232.00 5 Nos
18 180.00 5 Nos
19 187.00 5 Nos
20 116.00 5 Nos
21 119.00 5 Nos
22 161.00 5 Nos
23 157.00 15 Nos
24 223.00 5 Nos
25 83.00 100 Mtr
26 95.00 25 Mtr
27 61.00 60 Mtr
28 94.00 20 Mtr
29 81.00 55 Mtr
30 134.00 20 Mtr
31 8960.00 1 No
32 7739.00 1 No
33 3329.00 1 No
34 1899.00 1 No
35 1751.00 1 No
36 1185.00 1 No
37 618.00 1 No
38 2744.00 1 No
39 342.00 1 No
40 2023.00 1 No
41 919.00 3 Nos
42 219.00 24 Nos
43 186.00 25 Mtr
44 197.00 15 Mtr
45 231.00 5 Mtr
46 157.00 35 Mtr
47 239.00 30 Mtr
48 320.40 2 Nos
49 339.80 2 Nos
50 391.80 2 Nos
51 295.20 6 Nos
52 3917.00 2 Nos
53 267.00 2 Nos
60 18.00 16 Nos
61 19.00 8 Nos
62 11.30 6 Nos
63 17.00 4 Nos
64 20.00 4 Nos
65 90.00 10 Mtr
66 269.00 3 Mtr
67 6681.00 1 No
68 222.00 3 Nos
69 240.00 3 Nos
70 183.00 1 No
1 1828.00 2 Nos
2 294.00 2 Nos
Name of Work - Dist.Pt.pkd-2016-17 -Electrification to the Harisree building at GHSS Kottayi under District Panchayath Palakkad
6
Supply and wiring points according to IS 732-1989 using rigid PVC ivory conduit of minimum size 20 mm
conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the
conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC
insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main
,and continuous earthing with 2.00 mm copper conductor (14 SWG) size along with wiring/ cables and giving
connection , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size
modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular
typeROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the
terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the
periphery of the box using suitable ties, tie mounts etc as required. Single control light point with 6A, 3 plate
ceiling rose
Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator.
Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of
light points.
Do---- Independent plug-------Do
Call bell point with piano type 6 A bell push at one end and 6 A, 3 plate ceiling rose at other end
Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving
connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed
round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the
MS box and making good the surface as required. Gong bell - 225mm - without MS box
Supplying and fixing 200X150x 50mm with 3 mm sheet M.S. Boxes made out of 1.60 mm thick sheet painted
grey (both inside and outside ) in surface/ recess including phenolic laminated sheet covers of thicknesses noted
along with screwed to the box as front cover with steel screws, cup washers etc. making good the surface,
painting /colour washing etc. as required.
Supply, conveyance, installation, testing and commissioning of pre-wired light fittings made of .5mm thick
CRCA sheet accessories and lamps etc. including supplying and fixing ball and socket arrangements on PVC
round block, suspension down rod of 19mm dia MS conduit up to 2x30cm length including painting and wiring
the down rod with 16/0.20mm 3 core round copper conductor flex wire conforming to relevant ISS or extending
the original wiring and giving connections etc. a required. 20wLED light fittings
Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded
to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats
of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as
required (for the installation of outdoor light fittings). 25 mm dia with HG company fabricated clamps
Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard
accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC
sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as
required. 1200 mm sweep - 5 star rated
Supply and providing every additional length of down rod of suitable size heavy gauge GI / WI pipe with
16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming in relevant
ISS or with original wiring extended including painting as required.
Supplying and providing extra H.G conduit down rod of 19 mm dia 2 x 1.00 m long with 16/0.20 mm 3 core
copper conductor flex wire conforming to relevant ISS or with the extended original wiring and giving
connection etc. as required.
Supply and installation of suitable size MS rod type fan clamp as per IS 732 as required.
Supply and installation of suitable size MS belt type fan clamp fabricated from MS flat (2 pieces) as per IS 732
as required.
Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including
making good the damages, colour washing etc as required. (ROHS) - 8 module metal box in recess
4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as
incomer and SP/ TP MCB as outgoing (IP 42/43)
4 way (8+12) - three phase double cover (IP 42/43)
12 way single phase double cover (IP 42/43)
Supply and installation of the following accessories suitable for 50 Hz , AC supply conforming to IS 8828-1995/
IEC 60898 of the following current ratings in the existing enclosure and giving connections as required - 63A, 10
kA, 4 pole MCB (C curve)
32 A, 10 kA, 4 pole MCB (C curve)
25 A four pole mini break isolator
25 A, 4 pole, 30 mA RCCB
25 A double pole mini break isolator
25 A, 2 pole, 30 mA RCCB
6 A to 25 A, 10 kA, TP MCB (C curve)
6-32A( C curve)10 kA, SP MCB (C curve)
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1
KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding
60cms, making good the damages , colour washing etc. as required. 4 core 6 sq mm with factory made clamp
Supplying siemens / tropodur type nickel plated double compression brass cable glandwith earth clips and
aluminium socket for PVC insulated and PVC sheathed armoured aluminium/ copper conductor cable 1.1 KV
grade, and making end termination suitable for 2/ 3/ 3/ 4 core cable required. 4x6 sq mm
Do- 4x10sq.mm
Do- 4x16sq.mm
Do- 2x6sq.mm
Supply and providing plate earthing as per IS 3043 with 600x600x6.30 mm GI/CI earth plate, 20 mm GI
watering pipe fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel with weld mesh, filling required
quantity of charcoal including construction of inspection chamber with a bed concrete of 1:4:8 PCC using 40
mm broken stone (10 cm thick), brick work in cement mortar 1:6, plastering the surface of brick masonry and
the exposed surface of PCC bed with cement mortar 1:4, 12 mm thick, (the finished inside dimension shall be
300 x 300 x 300 mm) but excluding test joint, earth continuity conductor to the plate, and covering at the top. (in
ordinary soil)
Supply and providing the following sizes of cast iron gully trap with covering at the top of the inspection
chamber of earth pit as required 300 x 300 x 6 mm cast iron gully trap with covering
Supply and providing test joint for the earthing system using 2 Nos of 2 x 25 x 3 mm GI strip sizes of strips
including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required.
Supply and providing earth lead from the test joint to the earth electrode using 25x3 mm G I srip of conductors/
strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test joint etc as
required.
Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving
connection as required. 2.00 mm copper conductor (14 SWG)
2.65 mm copper conductor (12 SWG)
3.15 mm copper conductor (10 SWG)
Supply and laying bare earthing conductors of the following sizes laid 0.6 m below ground level including
excavating trench of suitable size and refilling etc. as required (in ordinary soil). 3.15 mm copper conductor (10
SWG)
supply of superior quality copper earth socket for the following sizes of earth conductor including crimping etc.
as required. 2.00 mm (14 SWG)
2.65/3.15 mm (10/12 SWG)
Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as
required including drilling necessary holes as required 12 x 3mm brass bolt & nut
25 x 3mm brass bolt & nut
25 x 6 mm brass bolt & nut
Supplying , threading , laying and jointing of the following sizes of 'B' class GI pipe with all required accessories
in ground in the existing trench as protective covering to earth leads. 15 mm dia
Supply and clamping the 40mm of "B" class GI pipe on wall with all required accessories & clamps etc.,
including cutting and making good the walls, painting the exposed portions etc., as protective covering to earth
leads / cables.
Fabrication, supply & installation of dust and vermin proof, wall mounting, thermoplastic meter box of
folowing size suitable for fixing KSEB meter,fuse units, CT etc, hinged door construction for the front side with
compartments if necessary, providing vision panel for the meter compartment, knock out for cable entry and exit.
600x300x214mm
Supply and fixing the following accessories in the existing meter board and giving connections etc. 63 A, 415 V
Backelite fuse fitting
50A DIN type fuse link of size 00
63 A, 415 V, 2 way neutral link mounted on DMC/ SMC base.
Total
Extra Item
Supply, conveyance, installation, testing and commissioning of the following sizes of exhaust fans in the existing
opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections
with required length of 24/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire
conforming to relevant ISS.- 300/ 305 mm, single phase light duty exhaust fan in metal frame
Charges for cutting holes suitable for accommodating exhaust fans of sizes up to 305 mm sweep including
plastering, colour washing etc. as required.
Extra Item
Abstract
Part-I
Extra Item
T.Amount
Deduct item No- 67 of Rs.
T.Amount
R (+/-)
Total
strict Panchayath Palakkad
7 8 9 10 11 12 13
2 51 Nos 42891.00
M B00k No - 289/16
3 23 Nos 34454.00
3 7 Nos 2947.00
3 3 Pts 1683.00
3 0 No 0.00
4 0 No 0.00
5 0 No 0.00
6 30 Nos 86040.00
6 16 Nos 43616.00
7 2 Nos 8122.00
7 3 Mtr 822.00
M B00k No -
M B00k No - 8 23 Nos 42619.00
9 9 Mtr 1782.00
9 23 Nos 2852.00
9 0 Nos 0.00
10 5 Nos 1160.00
M B00k No - 87 / 2015
10 8 Nos 1440.00
10 5 Nos 935.00
10 8 Nos 928.00
11 8 Nos 952.00
11 5 Nos 805.00
11 18 Nos 2826.00
11 5 Nos 1115.00
12 110 Mtr 9130.00
12 0 Mtr 0.00
12 55 Mtr 3355.00
12 15 Mtr 1410.00
M B00k No - 289/16
14 1 No 7739.00
14 1 No 3329.00
14 1 No 1899.00
15 1 No 1751.00
15 1 No 1185.00
15 1 No 618.00
15 1 No 2744.00
15 1 No 342.00
15 1 No 2023.00
16 3 Nos 2757.00
16 22 Nos 4818.00
16 14 Mtr 2604.00
16 25 Mtr 4925.00
17 13 Mtr 3003.00
17 37 Mtr 5809.00
17 35 Mtr 8365.00
18 2 Nos 640.80
18 2 Nos 679.60
18 2 Nos 783.60
18 4 Nos 1180.80
19 2 Nos 7834.00
20 2 Nos 534.00
21 24 Nos 432.00
22 12 Nos 228.00
22 12 Nos 135.60
22 0 Nos 0.00
22 4 Nos 80.00
23 8 Mtr 720.00
23 0 Mtr 0.00
2 Nos 3656.00 E
2 Nos 588.00 E
4244.00
395740.50
4244.00
399984.50
4104.00
395880.50
0.50
395881.00
Name of Work:- Dist.Pt.pkd-2016-17 -Electrification to the Harisree building at GHSS
Sl No Sub Head of Estimate and Items of work Original Estimate Re
Quant Rate Amount Quantity
ity Alrea
dy
Exec
uted
1 Supply and wiring points according to IS 732-1989 using rigid PVC 49 841.00 41209.00 51
ivory conduit of minimum size 20 mm conforming to IS 9537 part III
1983 and with suitable size specials conforming to IS 3419-1988,
fixing the conduit using metal saddles spacing not exceeding 50 cm or
concealed suitably and with 1.00 sq mm PVC insulated stranded single
core FR copper conductor cable 650V grade,including providing
switch board main ,and continuous earthing with 2.00 mm copper
conductor (14 SWG) size along with wiring/ cables and giving
connection , required qty of copper earth socket, brass bolt and nut
crimping etc complete with suitable size modular type metal switch
boxes, modular type front plates (white) etc. up to and including 6 A
modular typeROHS compliant SP switches and making good the
surface of wall, colour washing etc. complete. All the terminations in
the switch boards and DB's shall be tinned and the wires shall be
drawn and fixed along the periphery of the box using suitable ties, tie
mounts etc as required. Single control light point with 6A, 3 plate
ceiling rose
2 Single control ceiling fan point with 6 A, 3 plate ceiling rose & with 23 1498.00 34454.00 23
socket size stepped electronic regulator.
3 Combined plug point with 6 A, 5 pin plug socket controlled by 6 A 5 421.00 2105.00 7
switch in the same switch board as that of light points.
5 Call bell point with piano type 6 A bell push at one end and 6 A, 3 1 875.00 875.00 0
plate ceiling rose at other end
6 Supply and fixing the following types of superior quality 250V A.C 1 1490.00 1490.00 0
call bell on existing M.S. box and giving connections with required
length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and
PVC sheathed round copper conductor flex wire conforming to
relevant ISS or with the extended original wiring, earthing the MS box
and making good the surface as required. Gong bell - 225mm -
without MS box
7 Supplying and fixing 200X150x 50mm with 3 mm sheet M.S. Boxes 1 413.00 413.00 0
made out of 1.60 mm thick sheet painted grey (both inside and outside
) in surface/ recess including phenolic laminated sheet covers of
thicknesses noted along with screwed to the box as front cover with
steel screws, cup washers etc. making good the surface, painting
/colour washing etc. as required.
9 Do - 2 nos. flat iron brackets -do 20wLED light fittings 9 2726.00 24534.00 16
10 Supply, conveyance, installation, testing and commissioning of pre- 2 4061.00 8122.00 2
wired light fitting of the following types complete with all accessories
and lamps etc. in the existing GI pipe and giving connections with
required length of 16/0.20mm 3 core copper conductor flex wire
conforming to relevant ISS or extending the original wiring and giving
connection etc. as required. LED Street light fitting IP 66 20 W-105
lumen/W Osram strada plus/equivalent with all accesesories
11 Supply, fabrication, conveyance and fixing the following sizes of B 3 274.00 822.00 3
class GI pipe bent to shape / cut and welded to shape and fixing the
same to wall / parapet using clamps as noted along with each size,
painting with 2 coats of synthetic enamel paint over a coat of zinc
chromate primer, making good the damages, colour washing etc as
required (for the installation of outdoor light fittings). 25 mm dia with
HG company fabricated clamps
13 Supply and providing every additional length of down rod of suitable 6 115.00 690.00 4.6
size heavy gauge GI / WI pipe with 16/0.20mm PVC insulated and
PVC sheathed 3 core round copper conductor flex wire conforming in
relevant ISS or with original wiring extended including painting as
required.
14 Supplying and providing extra H.G conduit down rod of 19 mm dia 2 7 198.00 1386.00 9
x 1.00 m long with 16/0.20 mm 3 core copper conductor flex wire
conforming to relevant ISS or with the extended original wiring and
giving connection etc. as required.
15 Supply and installation of suitable size MS rod type fan clamp as per 20 124.00 2480.00 23
IS 732 as required.
16 Supply and installation of suitable size MS belt type fan clamp 3 182.00 546.00 0
fabricated from MS flat (2 pieces) as per IS 732 as required.
17 Supply & Fixing the following types/ sizes of boxes suitable for 5 232.00 1160.00 5
modular accessories in surface/ recess including making good the
damages, colour washing etc as required. (ROHS) - 8 module metal
box in recess
19 Supply & Fixing the following types/ sizes of front plates on the 5 187.00 935.00 5
existing modular boxes. (RoHS) - 8 module white/ off-white
20 3 module white/ off-white 5 116.00 580.00 8
21 Supply and Fixing the following modular switches & accessories in 5 119.00 595.00 8
the existing front plates and giving necessary connections as required -
6 A SP 1 way switch
22 16 A SP 1 way switch 5 161.00 805.00 5
23 6A 3 pin shuttered socket 15 157.00 2355.00 18
24 6/16 A socket 5 223.00 1115.00 5
25 Supply and fixing the following sizes of PVC Conduit conforming to 100 83.00 8300.00 110
IS 9537 / 1983 part III along with all required accessories on surface
including making good the damages etc as required. 20 mm dia light
gauge
32 4 way (8+12) - double cover TPN vertical DB with provision for 1 7739.00 7739.00 1
fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB
as outgoing (IP 42/43)
33 4 way (8+12) - three phase double cover (IP 42/43) 1 3329.00 3329.00 1
34 12 way single phase double cover (IP 42/43) 1 1899.00 1899.00 1
35 Supply and installation of the following accessories suitable for 50 1 1751.00 1751.00 1
Hz , AC supply conforming to IS 8828-1995/ IEC 60898 of the
following current ratings in the existing enclosure and giving
connections as required - 63A, 10 kA, 4 pole MCB (C curve)
48 Supplying siemens / tropodur type nickel plated double compression 2 320.40 640.80 2
brass cable glandwith earth clips and aluminium socket for PVC
insulated and PVC sheathed armoured aluminium/ copper conductor
cable 1.1 KV grade, and making end termination suitable for 2/ 3/ 3/
4 core cable required. 4x6 sq mm
53 Supply and providing the following sizes of cast iron gully trap with 2 267.00 534.00 2
covering at the top of the inspection chamber of earth pit as required
300 x 300 x 6 mm cast iron gully trap with covering
54 Supply and providing test joint for the earthing system using 2 Nos of 0.6 165.00 99.00 0.6
2 x 25 x 3 mm GI strip sizes of strips including cutting and bending to
shape, drilling necessary holes and fixed to the watering pipe etc as
required.
55 Supply and providing earth lead from the test joint to the earth 7.2 73.00 525.60 7.2
electrode using 25x3 mm G I srip of conductors/ strips including
cutting, drilling necessary holes (in case of strip) and fixing firmly
with plate test joint etc as required.
56 Supply and drawing bare earthing conductors of the following sizes 125 26.00 3250.00 157
along with wiring/ cables and giving connection as required. 2.00 mm
copper conductor (14 SWG)
57 2.65 mm copper conductor (12 SWG) 125 43.00 5375.00 174
59 Supply and laying bare earthing conductors of the following sizes laid 15 77.00 1155.00 16
0.6 m below ground level including excavating trench of suitable size
and refilling etc. as required (in ordinary soil). 3.15 mm copper
conductor (10 SWG)
60 supply of superior quality copper earth socket for the following sizes 16 18.00 288.00 24
of earth conductor including crimping etc. as required. 2.00 mm (14
SWG)
67 Fabrication, supply & installation of dust and vermin proof, wall 1 6681.00 6681.00 1
mounting, thermoplastic meter box of folowing size suitable for
fixing KSEB meter,fuse units, CT etc, hinged door construction for the
front side with compartments if necessary, providing vision panel for
the meter compartment, knock out for cable entry and exit.
600x300x214mm
68 Supply and fixing the following accessories in the existing meter 3 222.00 666.00 3
board and giving connections etc. 63 A, 415 V Backelite fuse fitting
2 Charges for cutting holes suitable for accommodating exhaust fans of 294.00 0.00 2
sizes up to 305 mm sweep including plastering, colour washing etc. as
required.
Extra Item 0.00
Abstract
Part-I 399547.60
Extra Item 0.00
T.Amount 399547.60
Deduct item No- 67 of Rs. 0.00
T.Amount 399547.60
Deviation
Savings for %
arisree building at GHSS Kottayi under District Panchayath Palakkad
Revised Estimate Savings Excess Reason for
Quantity Amount vartiation
To be Total Already To be Total
execu Executed execut
ted ed
0.00 157 4082.00 0.00 4082.00 0.00 832.00 Refer item No-
13 & 18 a
0.00 174 7482.00 0.00 7482.00 0.00 2107.00 Refer item No-
14 a,b,c
0.00 12 744.00 0.00 744.00 186.00 0.00 Change of
location of earth
0.00 16 1232.00 0.00 1232.00 0.00 77.00 pit
9 Do - 2 nos. flat iron brackets -do 20wLED light fittings 7 Nos 2726.00 19082.00
18 3 module metal box in recess 3 Nos 180.00 540.00
20 3 module white/ off-white 3 Nos 116.00 348.00
21 Supply and Fixing the following modular switches & accessories 3 Nos 119.00 357.00
in the existing front plates and giving necessary connections as
required - 6 A SP 1 way switch
44 4 core 10 sq mm with factory made clamp 10 Mtr 197.00 1970.00
45 4 core 16 sq mm with factory made clamp 8 Mtr 231.00 1848.00
56 Supply and drawing bare earthing conductors of the following 32 Mtr 26.00 832.00
sizes along with wiring/ cables and giving connection as
required. 2.00 mm copper conductor (14 SWG)
Amount 28213.80
5 7 1.25 6.25 2
9 16 2.25 11.25 7
5 8 1.25 6.25 3
5 8 1.25 6.25 3
5 8 1.25 6.25 3
15 25 3.75 18.75 10
5 13 1.25 6.25 8
125 157 31.25 156.25 32
8 12 2.00 10.00 4
6 12 1.50 7.50 6
Extra Item Estimate for-Dist.Pt.pkd-2016-17 -Electrification to the Harisree building at GHSS Kottayi
under District Panchayath Palakkad
Sl Unit Rate Amount
Quantity Particulars
No
1 2 Nos Supply, conveyance, installation, testing and commissioning of E 1828.00 3,656.00
the following sizes of exhaust fans in the existing opening,
fixing necessary bolt and nuts, making good the damages etc.
as required including giving connections with required length
of 24/0.20mm PVC insulated and PVC sheathed 3 core round
copper conductor flex wire conforming to relevant ISS.- 300/
305 mm, single phase light duty exhaust fan in metal frame
2 2 Nos Charges for cutting holes suitable for accommodating exhaust E 294.00 588.00
fans of sizes up to 305 mm sweep including plastering, colour
washing etc. as required.
Amount 4,244.00
160
Name of Work - Electrification of Panchayath office Extenssion Under Nellaya Grama Panchayath
1 23 4 5 6 7 8 9 10 11 12 13
1 841.00 17 Pts Supply and wiring points according to IS 732-1989 using rigid PVC ivory conduit of minimum size 20 mm conforming 2 17 Pts 14297.00
to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal
saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded single core FR
copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 2.00 mm
copper conductor (14 SWG) size along with wiring/ cables and giving connection , required qty of copper earth socket,
brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates
(white) etc. up to and including 6 A modular typeROHS compliant SP switches and making good the surface of wall,
colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be
drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required.
2 823.00 1 Pts Single control light point without ceiling rose 2 1 Pts 823.00
3 875.00 1 Pts Call bell point with piano type 6 A bell push at one end and 6 A, 3 plate ceiling rose at other end 3 1 Pts 875.00
4 1498.00 10 Pts Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator. 3 9 Pts 13482.00
5 421.00 6 PtsCombined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light 3 7 Pts 2947.00
points.
6 561.00 1 No Independent plug 3 3 No 1683.00
7 377.00 1 Nos Supply and fixing angle / straight brass lined skirt type, bakelite batten holder with 200mm polished aluminium shade. 4 2 Nos 754.00
M B00k No - 189/16-17
and 11 W LED LAmp and giving connection etc as required
8 1725.00 1 Nos Supply, conveyance, installation, testing and commissioning of pre-wired light fitting made of CRCA sheet of .5mm 5 1 Nos 1725.00
thickness complete with all accessories and lamps etc. directly on wall using 2 nos. flat iron brackets made from
25x6mm flat iron, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper
conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.
1x28wT5 fitting with lamp holder, APF electronic ballast suitable for continuous operation with THD <10%, power
factor >0.98, RoHS compliant,high lumen tube .
M B00k No - 189/16-17
30 126.00 15 Mtr 1.50 sq mm 6 run 10 27.9 Mtr 3515.40
31 106.00 30 Mtr 4 sq mm 2 run 10 22.1 Mtr 2342.60
32 7739.00 1 No Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including 11 1 No 7739.00
copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using
suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing
etc. as required -4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/
RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)
33 1899.00 2 No 12 way single phase double cover (IP 42/43) (For LDB) 11 3 No 5697.00
34 1572.00 1 No 8 way single phase double cover (IP 42/43) (For LDB) 12 0 No 0.00
35 1185.00 1 No Supply and installation of the following accessories suitable for 50 Hz , AC supply conforming to IS 8828-1995/ IEC 12 0 No 0.00
60898 of the following current ratings in the existing enclosure and giving connections as required 6 to32 A, 10 kA, 4
pole MCB (C curve)
36 618.00 1 No 40 A four pole mini break isolator 12 1 No 618.00
37 342.00 1 No 32 A two pole mini break isolator 12 3 No 1026.00
38 2023.00 2 Nos 25 A, 2 pole, 30 mA RCCB 12 2 Nos 4046.00
39 566.00 1 Nos 6 A to 32 A, 10 kA, DP MCB (C curve) 12 0 Nos 0.00
40 219.00 24 Nos 6 A to 32 A, 10 kA, SP MCB (C curve) 12 27 Nos 5913.00
41 197.00 10 Mtr Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade 13 10 Mtr 1970.00
of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good
the damages , colour washing etc. as required. - 4 core 10 sq mm with factory made clamp
162
42 339.80 2 Nos Supplaying siemens / Tropodor type compression gland for PVC sheathed armoured aluminium conductor cable 1.1 KV 13 2 Nos 679.60
grade and making end termination ,providing earth clips of size 12x1 mm copper for the gland and providing suitable
size cable sockets and making core termination as required suitable for cable size - 4/10 sq mm
43 26.00 140 Mtr Supply and drawing bare 2.00 mm ( No.14) copper conductor along with wiring/ Cables/ through Pipe etc as required. 13 182 Mtr 4732.00
M B00k No - 189/16-17
thick), brick work in cement mortar 1:6, plastering the surface of brick masonry and the exposed surface of PCC bed
with cement mortar 1:4, 12 mm thick, (the finished inside dimension shall be 300 x 300 x 300 mm) but excluding test
joint, earth continuity conductor to the plate, and covering at the top. (in Ordinary soil)
54 267.00 2 Nos Supply and providing the following sizes of cast iron gully trap with covering at the top of the inspection chamber of 17 2 Nos 534.00
earth pit as required
55 165.00 0.6 Mtr Supply and providing test joint for the earthing system using 2 Nos of 2 x 25 x 3 mm GI strip sizes of strips including 17 0.5 Mtr 82.50
cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required.
56 73.00 7.2 Mtr Supply and providing earth lead from the test joint to the earth electrode using 25x3 mm G I srip of conductors/ strips 17 4.0 Mtr 292.00
including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test joint etc as required.
57 6681.00 1 No Fabrication, supply & installation of dust and vermin proof, wall mounting, sintex meter box of folowing size suitable 18 1 No 6681.00
for fixing KSEB meter, fuse units, CT etc, hinged door construction for the front side with compartments if necessary,
providing vision panel for the meter compartment, knock out for cable entry and exit.- 600x300x214mm
Supply and fixing the following accessories in the existing meter board and giving connections etc. 0.00
a 222.00 3 Nos 63 A, 415 V, DIN type fuse base. 18 3 Nos 666.00 Item No- 67
b 198.00 3 Nos 2-80A DIN size00 18 3 Nos 594.00 Syntex meter
board is used. So
c 183.00 1 Nos 63 A, 415 V, 2 way neutral link mounted on DMC/ SMC base. 18 1 Nos 183.00
rate difference of
Total 199995.50 Rs.
Deduct item No- 57 of Rs. 4104.00 4104x1=4104
may be deducted
rate difference of
163 Rs.
4104x1=4104
T.Amount 195891.50 may be deducted
R (+/-) 0.50
Total 195892.00
164
165
166
167
168