Professional Documents
Culture Documents
Datasheet
Magnetoresistive Sensor ICs
The SS39ET/SS49E/SS59ET Series low-cost linear Hall-effect sensor ICs are small, versatile devices that are operated
by the magnetic field from a permanent magnet or an electromagnet. They are designed and manufactured for cost
competitiveness.
The linear sourcing output voltage is set by the supply voltage and varies in proportion to the strength of the magnetic field.
Low voltage capability as low as 2.7 Vdc and reduced current consumption of only 6 mA typically at 5 Vdc help make this
product energy efficient.
The integrated circuitry features low noise output, which makes it unnecessary to use external filtering. These sensor ICs
Interface with many electrical components without buffering. They also include thin film resistors to provide increased
temperature stability and accuracy.
These linear Hall-effect sensor ICs have an operating temperature range of -40 C to 100C [-40 F to 212 F], appropriate
for industrial and medical environments. Thermal balancing allows for stable operation over the full temperature range.
They are available in three package styles, all of which may be supplied on tape for automated, lower-cost assembly:
SOT-23: SS39ET. This small footprint takes up less space on the PC board, typically allowing for more components.
Flat TO-92-style, with different lead configurations: SS49E, SS49E-L, SS49E-F.
SOT-89B: SS59ET.
MEDICAL
Position sensing in infusion pumps
Output voltage span 1.05 to (Vs - 1.05) 0.95 to (Vs - 0.95) Vdc
Temperature error:
Null drift -0.10 0.10
%/C
Sensitivity drift 25 C -0.15 0.05
<25 C -0.04 0.185
Response time 3 s
Characteristic Parameter
Output current 10 mA
NOTICE CAUTION
ELECTROSTATIC
Absolute maximum ratings are the extreme limits that the device will withstand without damage to the SENSITIVE
DEVICES
device. However, the electrical and mechanical characteristics are not guaranteed as the maximum limits DO NOT OPEN OR HANDLE
(above recommended operating conditions) are approached, nor will the device necessarily operate at EXCEPT AT A
STATIC FREE WORKSTATION
absolute maximum ratings. ESD SENSITIVITY:
CLASS 3
Figure 1. Current Sourcing Output Block Diagram Figure 2. Transfer Characteristics (Vs = 5.0 Vdc)
4.0 Typical
Vs (+) Output
Voltage
Voltage (V)
2.5
HALL
SENSOR AMPLIFIER
OUTPUT (O)
1.0
65 A
TYPICAL
V- (-) -1000 -500 0 500 1000
Magnetic Range (Gauss)
sensing.honeywell.com 3
Linear Hall-effect Sensor ICs
Figure 3. Peformance Graphics
Null Shift vs Temperature Sensitivity Shift vs Temperature
10
30
Max.
20
10
2.6 3.0
0 Max.
0
-10 Min.
-12.0 -9.0
-20
Min.
-10 -30
-40 25 85 100 -40 25 85 100
Temperature (C) Temperature (C)
1.0
10
Max. Vs = 6.5 V
0.9
Max. Vs = 5.0 V
0.8 5 Max. Vs = 3.0 V
0.7
0
0 10 20 30 40 50 60 -40 25 100
Frequency (kHz) Temperature (C)
0.40
Max.
0.35
0.30
Nom.
0.25
0.20
Min.
0.15
2.7 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5
Supply Voltage (Vdc)
4 sensing.honeywell.com
SS39ET/SS49E/SS59ET Series
Figure 4. Mounting Dimensions (For reference only. mm/[in].) e
SS39ET 2,90
[0.114]
3
GND
(-)
Nominal to
IC center
2,80
[0.110]
1,60
[0.063]
1 2
VCC OUTPUT
(+)
0,77
1,40 Max. 1,20 [0.030]
[0.055] [0.047]
0,787
0,60 [0.031]
N [0.024]
S
Tape
4,00
[0.157]
4,00 1,50
[0.157] [0.059]
2,00
0,20 [0.079]
[0.008]
1,75
[0.069]
8,00
[0.315]
3,50
[0.138]
3,20
[0.125]
0,061 Top
[0.002] cover
tape
1,40 3,15 1,00
[0.055] [0.124] [0.039]
4,00 10,9
[0.157] [0.429]
Measured at
Reel outer edge
40,0
[1.57]
10
[0.394] 14,4
[0.567]
Measured at
hub
60,0
[2.362]
2,0
[0.079]
178 Max.
[7.000]
sensing.honeywell.com 5
Linear Hall-effect Sensor ICs
Figure 4. Mounting Dimensions (continued) e
SS49E SS49E-F SS49E-L
3,0 3,0
3,0 NS NS
1,7 [0.12] NS 1,7 [0,12] 1,7 [0.12]
[0,07] [0,07] [0,07]
Hall Hall
element Hall element
center element center
center
0,64
0,64 [0,025]
[0,025] 14,99
[0.59]
0,64
[0,025]
14,99
[0.59]
18,669
[0,735]
+ 0
+ 0
0,3 2,54 0,3
1,3 0,38 [0,015] 0,38 [0,015]
[0,05] [0,015] 0,76 [0,10] [0,015] 0,76
[0.03] [0.03]
+ 0
0,3
1,3 0,38 0,76 [0,015]
[0,05] [0,015] [0.03]
SS49E-T2
Adhesive tape
22,3
[0,88]
6,0 9,0
[0,23] [0,35]
18,0
[0,71]
6,3 2,5
[0,25] 3,99 [0,10]
[0,16]
12,7 SS49E-T3
[0,50]
Adhesive tape
22,3
[0,88]
6,0 9,0
[0,23] [0,35]
18,0
[0,71]
6,3 1,3
[0,25] 3,99
[0,16] [0,05]
12,7
[0,50]
6 sensing.honeywell.com
SS39ET/SS49E/SS59ET Series
Figure 4. Mounting Dimensions (continued) e
4,4
[0,17]
SS59ET
N
S
4,5
[0,18]
0,96 Typ. 1,74
0,1 [0.38] [0,07]
[0.01] To Hall-effect
sensing surface
4,2
2,5 2,4 [0,16]
[0,10] [0,09]
0,05
+ - 0
[0.002] 2X 1,52 3X 0,4
1,3 [0.06] [0.02]
[0,05]
Tape
8,0
[0.31]
4,0
[0.16]
0,4 Max. 1,5 2,0
2,4 Max. [0.02] [0,06] [0.08]
[0.9]
0,7 5,5
[0.004] [0.22]
5,8 Top cover tape
[0.230] 12,0
[0.47]
2,0
[0.08] 5,0
8,0 4,6 [0.20]
[0.315] [0.18]
Reel 12,2
2X 1,5 [0.48]
[0.06] 18,4
13,0 [0.72]
[0.51]
33,0
[1.30]
50,0
[1.97]
178,0
[7.01]
sensing.honeywell.com 7
Linear Hall-effect Sensor ICs
Table 3. Order Guide
Catalog Catalog
Description Description
Listing Listing
8 sensing.honeywell.com
ADDITIONAL INFORMATION
WARNING
The following associated literature is available at sensing.honeywell.com: PERSONAL INJURY
Product line guide
DO NOT USE these products as safety or emergency stop
Product range guide devices or in any other application where failure of the product
Product installation instructions could result in personal injury.
Application note Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
The information presented in this product sheet is for
reference only. Do not use this document as a product
installation guide.
Complete installation, operation, and maintenance
information is provided in the instructions supplied with each
product.
Failure to comply with these instructions could result in
death or serious injury.
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship. Honeywells standard
product warranty applies unless agreed to otherwise by Honeywell
in writing; please refer to your order acknowledgement or consult
your local sales office for specific warranty details. If warranted
goods are returned to Honeywell during the period of coverage,
Honeywell will repair or replace, at its option, without charge
those items it finds defective. The foregoing is buyers sole
remedy and is in lieu of all other warranties, expressed or
implied, including those of merchantability and fitness for
Find out more a particular purpose. In no event shall Honeywell be liable
Honeywell serves its customers for consequential, special, or indirect damages.
through a worldwide network
of sales offices, representatives While we provide application assistance personally, through our
and distributors. For application literature and the Honeywell website, it is up to the customer to
assistance, current specifications, determine the suitability of the product in the application.
pricing or name of the nearest
Authorized Distributor, contact Specifications may change without notice. The information we
your local sales office. supply is believed to be accurate and reliable as of this printing.
To learn more about Honeywells However, we assume no responsibility for its use.
sensing and control products,
call +1-815-235-6847 or
1-800-537-6945, visit
sensing.honeywell.com,
or e-mail inquiries to
info.sc@honeywell.com