You are on page 1of 2

DIP Multi-Phase

Flowmeter

www.rtsservices.ca
DIP Multi-Phase Flowmeter
Finally - an affordable, easy to implement MPFM
for the Energy Industry

For over 20 years, RTS Services has been a leader MPFMs provide critical information on performance
in the Gas and Energy Distribution Industry in of your well. This enables timely decisions and
providing timely and accurate metering and reporting forecasting that will save you money when well
technologies. viability determinations are required.

Our new DIP Multi-Phase Flowmeter continues this The DIP flow computer has been designed to work
trend. The clamp on sensor is the easiest on the with any SCADA system that supports Modbus.
market to install and implement.
All data calculations take place on site in the DIP flow
Rather than using expensive radioactive density computer and are stored and can be accessed locally
measurements like many competitors, we use a with a laptop via web interface or on an optional
vibration sensor to measure vibroacoustic signals display and interface screen.
produced by the fluid within the existing pipe.
The DIP flow computer can handle up to four DIP
This signal is then sent to the DIP flow computer which Multi-Phase Flowmeters as well as additional pressure
calculates gas flow, oil flow, water flow, gas volume or temperature sensors to suit your need.
fraction and water cut.
If ongoing logging and remote monitoring are
Applications include well monitoring, well desired, contact RTS Services, Inc. and ask about the
management, production optimization, reservoir FieldLinq SCADA Server.
management and many more.

Hardware Specifications
Specification Value
Key Benefits
Operating Ranges Water In Liquid Ratio 0 - 100%

Gas Volume Fraction 0 - 100%


Clamp on installation onto existing pipe
Pipe Diameter Will Mount to any Pipe Diameter decreases implementation costs and
Maximum Flow Capacity Liquid Flow Rate 0.1 - 10 000 m3/day environmental risks
Gas Flow Rate 1 to 250 000 m3/day Highly accurate - ask us about our extensive
Installation Clamp on - Non Intrusive testing performed with our partners
Accuracy Water In Liquid +/- 2% Because additional pipe installation is not
Gas Volume Fraction +/- 2% required, flow properties arent affected
Maximum Pressure
20000 kPa (Determined by properties Once installed, requires almost no maintenance
of pipe)
Data retrieval through web based application
Maximum Temperature +135 C
from your site
Maximum Power Consumption Variable based on configuration
Affordable
Communications Modbus

Contact RTS Services Inc.


6605-42nd Avenue, Ponoka, AB, T4J 1J8 Canada
Phone: 403.783.8807 | Toll Free: 1.888.511.0554 | Fax: 403.783.8338
Web: www.rtsservices.ca | Email: sales@rtsservices.ca

You might also like