You are on page 1of 115

ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Page 1 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

ESTIMATING DATA 2016

Page 2 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

SECTION DESCRIPTION ITEM No

Section 1 External Electrification 1 to 761


GENERATING SET DIESEL ENGINE DRIVEN 1 to 30
TRANSFORMERS 31 to 48
HT SWITCH GEAR 49 to 56
SF6 CIRCUIT BREAKER 57 to 65
HT CTs & PTs 66 to 73
COMPACT SUB STN 74 to 81
LOAD BREAK SWITCH 82 to 83
GANG OPERATED AIR BREAK SWITHCHES 84 to 93
RUBBER MAT AND HAND GLOVES 95 to 98
LT SWITCH GEAR 99 to 104
COMPACT AIR INSULATED RISING MAINS 105 to 122
BUS TRUNKING 123 to 142
PLUGGING BOXES 143 to 148
CAPACITOR 149 to 213
LT SWITCH 214 to 228
RCCB & MCCB 229 to 280
ON LOAD CHANGE OVER SWITCH 281 to 316
VOLTAGE STABILIZER & UPS 317 to 353
ARMOURED XLPE CABLES & COPPER 354 to 402
CONDUCTOR
CABLE JOINTING KIT & CABLE GLAND 403 to 453
AERIAL BUNCHED CABLE & OVER 454 to 542
HEAD LINE ON POLE
4 POLE AND 2 POLE STRUCTURE 543 to 550
LIGHTING ARRESTORS & EARTHING 551 to 555
SERVICE CONNECTIONS & METERS 556 to 573
FANS 574 to 586
TIME SWITCHES & STREET LIGHT / FLOOD 587 to 611
LIGHT
LED STREET LIGHTS, FLOOD LIGHTS & POST 612 to 628
TOP LANTERNS
INDUSTRIAL LIGHT FITTING & BULK HEAD 629 to 632
FITTINGS
INDOOR LIGHT FITTINGS & LED INDOOR 633 to 666
LIGHTS
HIGH MAST LIGHTS 667 to 669
SHADOWLESS LIGHT FITTINGS 670 to 673

Page 3 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

FLAME PROOF, WEATHER PROOF, DUST 674 to 696


PROOF, DUST TIGHT & TOTALLY ENCLOSED
LIGHT FITTINGS
PCC POLES, STEEL TUBULAR POLES & SWAN 697 to 710
NECK TYPE POLES
CRANES 711 to 738
LIFTS 739 to 753
LIGHTING PROTECTION 754 to 757
EXCAVATION BY TRENCHLESS TECH 758 to 758
SOLAR PV GENERATION 759 to 761

Section 2 External Water Supply 1001 to 1472


TUBE WELLS 1001 to 1014
PUMPSET / STARTER 1015 to 1061
DISINFECTION,TREATMENT PLANTS 1062 to 1061
METALLIC PIPES 1072 to 1161
UPV & PP-R PIPES 1162 to 1209
VALVES & STRAINER 1210 to 1313
STOP COCK & BIB COCK 1314 to 1325
HOT WATER APPARATUS 1326 to 1337
FIRE FIGHTING 1338 to 1416
BEAM MASTER DETECTOR 1417 to 1418
ANNUCIATING DEVICES 1419 to 1429
PA SYSTEM 1430 to 1447
SWIMMING POOL FILTRATION PLANT 1448 to 1451
PRESSURE FILTER 1452 to 1460
SWIMMING POOL WATER TREATMENT 1461 to 1468
RO PLANT 1469 to 1472

Section 3 Refrigeration, Air Conditioning, 1501 to 1584


Refrigerators & Central Heating System
REFRIGERATORS 1501 to 1504
WATER COOLER 1505 to 1508
DEEP FREEZER 1509 to 1512
EVAPORATIVE COOLER (DESERT COOLER) 1513 to 1517
WINDOW AIR CONDITIONER 1518 to 1520
SPLIT AIR CONDITIONER 1521 to 1523
AIR CONDITIONER CASSETTEE TYPE 1524 to 1526
PACKAGE TYPE AIR CONDITIONING 1527 to 1532
CENTRAL AIR CONDITIONING PLANTS 1533 to 1541
PRECISION AIR CONDITIONING 1542 to 1545
AIR CURTAIN 1546 to 1550
CHEMICAL DEHUMIDIFIERS 1551 to 1556
CENTRAL HEATING SYSTEM 1557 to 1570
BOILER(OIL FIRED) 1571 to 1584

Page 4 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Section 4 Tools & Plants 2201 to 2322


ALUMINUM LADDER 2201 to 2205
CRIMPING TOOLS 2206 to 2214
DIGITAL METER 2215 to 2220
OTHER METER 2221 to 2231
DRILL & BLOWER 2232 to 2233
COMMON HAND TOOLS 2234 to 2300
CENTRIFUGE MACHINE FOR TRANSFORMER OIL 22301 to 2304
DISCHARGE ROD 2305 to 2309
CABLE FAULT LOCATING MACHINE 2310 to 2311
WATER SUPPLY 2312 to 2321
SWIMMING POOL 2322

Section 5 Public Health Engineering with tech data 3001 to 3185


GRAVITY SEWERS 3001 to 3040
SEPTIC TANKS AND SHALLOW SEWER 3051 to 3065
SOAL WELLS 3068 to 3082
SUMP WELL CUM PUMP HOUSES 3101 to 3133
SUBMERSIBLE PUMPS 3134 to 3155
SEWAGE TREATMENT PLANT (MBBR Based) 3171 to 3185

Section 6 Technical Data for Section 1 to 4 Appendix A

Page 5 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

SECTION - 1
(EXTERNAL ELECTRIFICATION)
( Item No 1 TO 761 )

Page 6 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

SECTION - 1
(EXTERNAL ELECTRIFICATION)
( Item No 1 TO 761 )
GENERATING SET DIESEL ENGINE DRIVEN
Supply and installation of silent Diesel
Engine driven generating set 415 volts, 3
phase 4 wire, engine as per IS:10001/
10002 and Alternator as per IS: 13364
1 KVA 42,599
complete with foundation (as per OEM
design), control panel with necessary meter
and sound proof canopy as per CPCB
norms of capacity upto 10 KVA
2 -do- but above 10 KVA & upto 15 KVA KVA 30,364
3 -do- but above 15 KVA & upto 20 KVA KVA 26,132
4 -do- but above 20 KVA & upto 30 KVA KVA 20,223
5 -do- but above 30 KVA & upto 40 KVA KVA 17,946
6 -do- but above 40 KVA & upto 50 KVA KVA 15,973
7 -do- but above 50 KVA & upto 62.5 KVA KVA 13,202
8 -do- but above 62.5 KVA & upto 82.5 KVA KVA 11,874
9 -do- but above 82.5 KVA & upto 100 KVA KVA 11,617
10 -do- but above 100 KVA & upto 160 KVA KVA 10,285
11 -do- but above 160 KVA & upto 250 KVA KVA 10,232
12 -do- but above 250 KVA & upto 320 KVA KVA 10,115
13 -do- but above 320 KVA & upto 400 KVA KVA 9,573
14 -do- but above 400 KVA & upto 500 KVA KVA 9,716
15 -do- but above 500 KVA KVA 9,716
GENERATING SET DIESEL ENGINE DRIVEN WITH AMF PANEL
Supply and installation of silent Diesel
Engine driven generating set 415 volts, 3
phase 4 wire, engine as per IS:10001/
10002 and Alternator as per IS: 13364
16 complete with relay panel and switch gears KVA 49,435
for automatic starting on main failure, control
panel having meter and sound proof canopy
as per CPCB norms and foundation etc. of
capacity upto 10 KVA
17 -do- but above 10 KVA & upto 15 KVA KVA 36,451
18 -do- but above 15 KVA & upto 20 KVA KVA 30,896
19 -do- but above 20 KVA & upto 30 KVA KVA 23,737

Page 7 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

20 -do- but above 30 KVA & upto 40 KVA KVA 20,929


21 -do- but above 40 KVA & upto 50 KVA KVA 18,942
22 -do- but above 50 KVA & upto 62.5 KVA KVA 15,791
23 -do- but above 62.5 KVA & upto 82.5 KVA KVA 13,838
24 -do- but above 82.5 KVA & upto 100 KVA KVA 13,806
25 -do- but above 100 KVA & upto 160 KVA KVA 11,895
26 -do- but above 160 KVA & upto 250 KVA KVA 11,530
27 -do- but above 250 KVA & upto 320 KVA KVA 11,337
28 -do- but above 320 KVA & upto 400 KVA KVA 10,722
29 -do- but above 400 KVA & upto 500 KVA KVA 10,722
30 -do- but above 500 KVA KVA 10,722
Building for Generator is not required but operator rest room, toilet & store for fuel
is to be planned and estimated separately.
TRANSFORMER 11 KV/433 V VOLTAGE RATIO
Supply and installation of copper wound
transformer step up/ step down,
indoor/outdoor type complete with standard
31 fittings, HT 11 KV 3 Phase, LT 433 volts, 3 KVA 4,708
Phase 4 wire with off load tappings on HT
side to vary secondary voltage within limit,
all as per IS:2026 of capacity upto 63 KVA
-- do -- but of capacity above 63 KVA and
32 KVA 5,121
upto 100 KVA
-- do -- but of capacity above 100 KVA and
33 KVA 3,629
upto 160 KVA
-- do -- but of capacity above 160 KVA and
34 KVA 2,920
upto 200 KVA
35 .--do-- above 200 KVA and up to 300 KVA KVA 2,814
-- do -- but of capacity above 300 KVA and
36 KVA 2,285
upto 400 KVA
-- do -- but of capacity above 400 KVA and
37 KVA 2,042
upto 500 KVA
-- do -- but of capacity above 500 KVA
38 KVA 2,042
and upto 750 KVA.
39 -- do -- but of capacity above 750 KVA KVA 1,767

Note: Same rate, as above, are applicable for BEE 3 star rated 11 KV/433 V
distribution transformer, Aluminium wound up to 200 KVA capacity.

Page 8 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

TRANSFORMER 33 KV/11K V WITH OFF LOAD TAP CHANGER


Supply and installation of copper wound
transformer step up/ step down, outdoor
type complete filled with oil, with standard
40 fittings and foundation, HT 33 KV, KVA 2,285
secondary 11 KV, 3 phase, with OFF load
tap changing , all as per IS: 2026 of
capacity up to 1000 KVA
-- do -- but of capacity above 1000 KVA
41 KVA 2,042
and upto 1600KVA
-- do -- but of capacity above 1600 KVA
42 KVA 1,735
and upto 2000 KVA
-- do -- but of capacity above 2000 KVA
43 KVA 1,672
and upto 2500 KVA
-- do -- but of capacity above 2500 KVA
44 KVA 1,672
and upto 5000 KVA
TRANSFORMER 33 KV/11K V WITH ON LOAD TAP CHANGER
Supply and installation of copper wound
transformer step up/ step down, outdoor
type complete filled with oil, with standard
45 fittings and foundation, HT 33 KV, KVA 2,031
secondary 11 KV, 3 phase, with ON load
tap changing , all as per IS: 2026 of capacity
up to 2500 KVA
-- do -- but of capacity above 2500 KVA
46 KVA 2,000
and upto 5000 KVA
-- do -- but of capacity above 5000 KVA
47 KVA 1,937
and upto 7500 KVA
48 -- do -- but of capacity above 7500 KVA KVA 1,789
Item No 31-48 Cost of RCC Foundation for Transformer and Cattle
Note:
fencing (1.5m high) around is included in above rates.
HT SWITCH GEAR
VACUUM CIRCUIT BREAKER
(INDOOR)
Supply and installation of HT 11 KV, 3
phase, 50 Hz totally enclosed metal clad
switchgear complete with Vacuum circuit
49 breaker having rupturing capacity 250 MVA, Each 5,98,321
overload and earth fault protection,
ammeter, voltmeter and of rating upto 400
Amp
-- do -- but rupturing capacity 350 MVA of
50 Each 7,10,543
rating upto 630 Amp
51 -- do -- but of 800 Amp capacity Each 7,61,464

Page 9 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

52 -- do -- but of 1200 Amp capacity Each 8,63,434


53 -- do -- but of 1600 Amp capacity Each 9,04,040
54 -- do -- but of 2500 Amp capacity Each 9,11,362
(OUTDOOR)
Supply and installation of HT 11 KV, 3
phase, 50 cycles totally enclosed metal clad
switchgear complete with Vacuum circuit
55 breaker having rupturing capacity upto 250 Each 9,09,150
MVA, overload and earth fault protection,
ammeter, voltmeter and of rating upto 400
Amp
-- do -- but rupturing capacity 350 MVA
56 Each 10,04,370
of rating upto 630 Amp
SF6 CIRCUIT BREAKER
(INDOOR)
Supply and installation of HT 11 KV ,3
phase, 50 cycles totally enclosed metal clad
SF6 switchgear having rupturing capacity
57 Each 9,55,152
upto 250 MVA, overload and earth fault
protection, ammeter, voltmeter and of rating
upto 400 Amp
-- do -- but rupturing capacity 350 MVA of
58 Each 10,56,212
rating upto 630 Amp
Supply and installation of HT 33 KV, 3
phase, 50 cycles totally enclosed metal clad
SF6 switchgear having rupturing capacity
59 Each 14,62,030
upto 250 MVA, overload and earth fault
protection, ammeter, voltmeter and of rating
upto 400 Amp
-- do -- but rupturing capacity 350 MVA of
60 Each 15,18,717
rating upto 630 Amp
(OUTDOOR)
Supply and installation of Ring main unit
61 one incoming two outgoing SF6 filled load Each 11,26,569
break switch each of 11 KV ,630 Amp
Supply and installation of HT 11 KV, 3
phase, 50 cycles, totally enclosed metal
clad SF6 Switchgear having Rupturing
62 Each 11,66,858
capacity upto 250 MVA, overload and earth
fault protection, ammeter, voltmeter and of
rating upto 400 Amp
-- do -- but rupturing capacity 350 MVA of
63 Each 13,56,007
rating upto 630 Amp

Page 10 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and installation of HT 33 KV ,3


phase, 50 cycles totally enclosed metal clad
SF6 Switchgear having Rupturing capacity
64 Each 16,04,426
upto 250 MVA, overload and earth fault
protection, ammeter, voltmeter and of rating
upto 400 Amp
-- do -- but rupturing capacity 350 MVA of
65 Each 16,83,247
rating upto 630 Amp
Note FOR CTs and PTs : add prices from item No. 66 to 73 in relevant item of
switchgear
HT CTs & PTs
Supply and installation of 11 KV, single
66 phase, out door oil cooled CT of ratio 400/5- Set of 3 1,01,198
5 Amp, class 1.0 / 5P10, burden 15 VA
67 -- do -- but for 33 KV Set of 3 1,46,671
Supply and installation of 11 KV single
phase out door oil cooled PT of ratio 11
68 Set of 3 95,199
KV/rt3/110 V/rt3/110V/rt3,Class 0.5-3,
Burden 50 VA 50 VA
69 -- do -- but for 33 KV Set of 3 1,45,602
Supply and installation of 11 KV single
70 phase in door resin cast CT of ratio 400/5- Set of 3 53,345
5A class 1.0/ 5P10,burden 15VA 15 VA
71 -- do -- but for 33 KV voltage Set of 3 1,21,343
Supply and installation of 11 KV single
phase in door resin cast PT of ratio 11
72 Set of 3 73,193
KV/rt3/110 V/rt3/110V/rt3,Class 0.5-3,
Burden 50 VA 50 VA
73 -- do -- but for 33 KV Set of 3 1,27,712

COMPACT SUB STATION(CSS)


Supply and Installation of 11 KV Compact
Sub Station with non extensible RMU
consisting of 1 No manually operated 11
KV/630 Amps VCB in SF6 insulated
74 Each 13,36,384
stainless enclosure,HT Cable/Bus bar ,1 No
transformer 100 KVA,11KV/433 CRT dry
type & associated LT
devices(ACB/MCCB/bus bar/Cable)
75 .--do-- but transformer of 315 KVA Each 18,89,250
76 .--do-- but transformer of 500 KVA Each 22,53,502

Page 11 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

77 .--do-- but transformer of 630 KVA Each 24,95,781


78 .--do-- but transformer of 1000 KVA Each 32,94,789
79 .--do-- but transformer of 1250 KVA Each 37,31,558
80 .--do-- but transformer of 1600 KVA Each 43,49,844
81 .--do-- but transformer of 2000 KVA Each 50,17,531
Note: CSS rate are inclusive of foundation and plinth
LOAD BREAK SWITCH
Supply and Installation of11 KV, 630 Amp
82 Each 1,57,642
Load break switch with earth switch
Supply and Installation of11 KV, 630 Amp
83 Load break switch with 200 Amp DO set Each 2,04,935
and earth switch
GANG OPERATED AIR BREAK SWITCHES (GOD)
Supply and fix HT 11 KV, out door type
gang operated air-break switch suitable for
84 horizontal or vertical mounting fixed type Each 26,355
complete with 9 insulators of rating upto 200
Amps
85 -do- but 400 Amps Each 27,889
86 -do- but 630 Amps Each 29,751
Supply and fix HT 11 KV out door type gang
operated air-break switch suitable for
87 horizontal or vertical mounting rotating type Each 30,608
complete with 9 insulators of rating upto 200
Amps
88 -do- but 400 Amps Each 43,992
Supply and fix HT 11 KV out door type gang
operated air-break switch suitable for
89 horizontal or vertical mounting rotating type Each 44,299
complete with drop out fuse having 12
insulators of rating upto 200 Amps
90 -do- but 400 Amps Each 50,054
Supply and fix HT 33 KV out door type gang
operated air-break switch suitable for
91 horizontal or vertical mounting fixed type Each 62,264
complete with 9 insulators of rating upto 200
Amps
92 -do- but 400 Amps Each 69,797
Supply and fix HT 33 KV out door gang
operated air-break switch 9 insulator
93 Each 77,637
rocking type horizontal mounting of 200/400
Amps rating

Page 12 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix HT 33 KV out door type


gang operated air-break switch suitable for
94 horizontal or vertical mounting fixed type Each 82,345
complete with 9 insulators and with earth
switch upto 200/400 Amps
Note: Cost of GOD includes cost of GI pipe required for operation
Rubber Mat and Hand Glove
95 Rubber mat of 1 meter x 2 meter x 10 mm Each 2,899
96 Rubber mat of 1 meter x 2 meter x 19 mm Each 5,375
97 Electric rubber hand gloves 11 KV Each 900
98 Electric rubber hand gloves 33 KV Each 2,169
LT SWITCH GEAR
Supply & fix LT switch gear 440 Volts 3
phase, 4 wire 50 cycles, cubicle or truck
type complete with air circuit breaker,
99 Each 2,71,716
overload protection, no-volt release with
necessary CTs,meter and cable boxes of
rating upto 800 Amps
100 -do- but of rating 1000 Amps Each 2,84,581
101 -do- but of rating 1250 Amps Each 3,17,972
102 -do- but of rating 1600 Amps Each 3,46,136
Supply and fix LT synchronizing panel
complete with synchroscope, voltmeter,
103 frequency meter load sharing relay and Each 61,238
other accessories and complete
with internal wiring up to 160 KVA
104 -do- but exceeding 160 KVA Each 76,388
COMPACT AIR INSULATED RISING MAINS
(ALUMINIUM BUS BAR)
Supply and fix compact air insulated rising
main with aluminium busbar 125
105 RM 15,130
Amps,breaking capacity of 35 KA and IP 54
protection
Supply and fix compact air insulated rising
main with aluminium busbar 200
106 RM 18,039
Amp,breaking capacity of 35 KA and IP 54
protection
Supply and fix compact air insulated rising
main with aluminium busbar 315
107 RM 19,320
Amps,breaking capacity of 35 KA and IP 54
protection

Page 13 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix compact air insulated rising


main with aluminium busbar 400 Amps
108 RM 20,483
having, breaking capacity of 35 KA and IP
54 protection
Supply and fix compact air insulated rising
main with aluminium busbar 500
109 RM 22,695
Amps,breaking capacity of 35 KA and IP 54
protection
Supply and fix compact air insulated rising
main with aluminium busbar 630
110 RM 24,673
Amps,breaking capacity of 35 KA and IP 54
protection
Supply and fix compact air insulated rising
main with aluminium busbar 800
111 RM 33,751
Amps,breaking capacity of 35 KA and IP 54
protection
Supply and fix compact air insulated rising
main with aluminium busbar 1000
112 RM 42,130
Amps,breaking capacity of 35 KA and IP 54
protection
Supply and fix compact air insulated rising
main with aluminium busbar 1250
113 RM 45,738
Amps,breaking capacity of 35 KA and IP 54
protection
(COPPER BUS BAR)
Supply and fix compact air insulated rising
main with copper busbar 125
114 RM 20,483
Amps,breaking capacity of 35 KA and IP 54
protection
Supply and fix compact air insulated rising
main with copper busbar 200
115 RM 20,483
Amps,breaking capacity of 35 KA and IP 54
protection
Supply and fix compact air insulated rising
main with copper busbar 315
116 RM 28,281
Amps,breaking capacity of 35 KA and IP 54
protection
Supply and fix compact air insulated rising
main with copper busbar 400
117 RM 29,445
Amps,breaking capacity of 35 KA and IP 54
protection

Page 14 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix compact air insulated rising


main with copper busbar 500 Amps
118 RM 33,634
,breaking capacity of 35 KA and IP 54
protection
Supply and fix compact air insulated rising
main with copper busbar 630
119 RM 38,639
Amps,breaking capacity of 35 KA and IP 54
protection
Supply and fix compact air insulated rising
main with copper busbar 800
120 RM 54,699
Amps,breaking capacity of 35 KA and IP 54
protection
Supply and fix compact air insulated rising
main with copper busbar 1000 Amps
121 RM 70,527
,breaking capacity of 35 KA and IP 54
protection
Supply and fix compact air insulated rising
main with copper busbar 1250
122 RM 80,070
Amps,breaking capacity of 35 KA and IP 54
protection
Note: Item No 105-122 Rates include cost of 4P MCCBs of suitable
capacity,separators,flexible joints,tap off boxes,end feed units,earthing etc.
COMPACT AIR INSULATED BUS TRUNKING
(ALUMINIUM BUS BAR)
Supply and fix compact air insulated bus bar
trunking system with aluminium busbar 630
123 RM 11,638
Amps, 50 KA breaking capacity,IP 54
protection
Supply and fix compact air insulated bus bar
trunking system with aluminium busbar 800
124 RM 15,130
Amps,50 KA breaking capacity,IP 54
protection
Supply and fix compact air insulated bus bar
trunking system with aluminium busbar
125 RM 18,039
1000 Amps,50 KA breaking capacity,IP 54
protection
Supply and fix compact air insulated bus bar
trunking system with aluminium busbar
126 RM 21,531
1250 Amps,50 KA breaking capacity,IP 54
protection
(COPPER BUS BAR)

Page 15 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix compact air insulated bus bar


trunking system with copper busbar 630
127 RM 28,281
Amps,50 KA breaking capacity,IP 54
protection
Supply and fix compact air insulated bus bar
trunking system with copper busbar 800
128 RM 36,893
Amps,50 KA breaking capacity,IP 54
protection
Supply and fix compact air insulated bus bar
trunking system with copper busbar 1000
129 RM 46,669
Amps,50 KA breaking capacity,IP 54
protection
Supply and fix compact air insulated bus bar
trunking system with copper busbar 1250
130 RM 53,768
Amps,50 KA breaking capacity,IP 54
protection
SANDWICH TYPE BUS TRUNKING
(ALUMINIUM BUS BAR)
Supply and fix sandwich type bus trunking
131 system with aluminium busbar 630 Amps,50 RM 13,035
KA breaking capacity,IP 54 protection
Supply and fix sandwich type bus trunking
132 system with aluminium busbar 800 Amps,50 RM 15,828
KA breaking capacity,IP 54 protection
Supply and fix sandwich type bus trunking
system with aluminium busbar 1000
133 RM 17,807
Amps,50 KA breaking capacity,IP 54
protection
Supply and fix sandwich type bus trunking
system with aluminium busbar 1250
134 RM 20,367
Amps,50 KA breaking capacity,IP 54
protection
Supply and fix sandwich type bus trunking
system with aluminium busbar 1600
135 RM 25,488
Amps,50 KA breaking capacity,IP 54
protection
Supply and fix sandwich type bus trunking
system with aluminium busbar 2000
136 RM 29,910
Amps,50 KA breaking capacity,IP 54
protection
(COPPER BUS BAR)

Page 16 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix sandwich type bus trunking


137 system with copper busbar 630 Amps,50 KA RM 36,660
breaking capacity,IP 54 protection
Supply and fix sandwich type bus trunking
138 system with copper busbar 800 Amps,50 KA RM 43,876
breaking capacity,IP 54 protection
Supply and fix sandwich type bus trunking
139 system with copper busbar 1000 Amps,50 RM 58,772
KA breaking capacity,IP 54 protection
Supply and fix sandwich type bus trunking
140 system with copper busbar 1250 Amps,50 RM 78,557
KA breaking capacity,IP 54 protection
Supply and fix sandwich type bus trunking
141 system with copper busbar 1600 Amps,50 RM 91,359
KA breaking capacity,IP 54 protection
Supply and fix sandwich type bus trunking
142 system with copper busbar 2000 Amps,50 RM 1,24,062
KA breaking capacity,IP 54 protection
NOTE: Item No 123-142 Rates include cost of separators,flexible joints,tap off
boxes,end feed units,earthing etc.
PLUG IN BOXES FOR RISING MAIN/ BUS BAR TRUNKING TO BRANCH
OUT CONNECTION
Supply and fix 4 pole plug in box 100 Amp
143 Each 55,651
with MCCB 35/50 KA
Supply and fix 4 pole plug in box 250 Amp
144 Each 1,04,023
with MCCB 35/50KA
Supply and fix 4 pole plug in box 315 Amp
145 Each 1,10,477
with MCCB 35/50 KA
Supply and fix 4 pole plug in box 400 Amp
146 Each 1,24,294
with MCCB 35/50 KA
Supply and fix 4 pole plug in box 630 Amp
147 Each 1,82,527
with MCCB 35/50 KA
Supply and fix 4 pole plug in box 800 Amp
148 Each 2,92,823
with MCCB 35/50 KA

Page 17 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

POWER FACTOR IMPROVEMENT CAPACITOR


Note: To decide type of capacitor to be used, first find out percentage of
non linear load in the system as worked out below and then select the type
of capacitor as given in table:.
Example Calculation for percentage non linear loads
TRANSFORMER CAPACITY --- 1000 KVA
UPS LOAD --- 10 KVA
AC DRIVE --- 50 KVA
WELDING LOAD 40 KVA
TOTAL NON LINEAR LOAD --- 100 KVA
PERCENTAGE NON LINEAR LOAD = 100/1000=10%
PERMISSIBLE LOADS
Type of Capacitor Permissible percentage
(Non linear loads)
MPP-S 10%,
MPP-H 15% ,
MPP-XL 20%,
FILTER REACTOR + MD-XL CAPACITOR Above 20% & upto 50%

MPP-H CAPACITOR
Supply and fix capacitor metalized poly
propylene heavy duty (MPP-H) for 3 phase
149 Each 3,069
,440 V, 50 Hz System for permissible non-
linear load 15% of 5 KVAR capacity.
150 -- Do -- but of 7.5 KVAR capacity Each 4,307
151 -- Do -- but of 10 KVAR capacity Each 5,460
152 -- Do -- but of 15 KVAR capacity Each 8,041
153 -- Do -- but of 20 KVAR capacity Each 10,422
154 -- Do -- but of 25 KVAR capacity Each 12,580
155 -- Do -- but of 30 KVAR capacity Each 14,950
156 -- Do -- but of 40 (20 x 2) KVAR capacity Each 20,018
157 -- Do -- but of 50 (25 x 2) KVAR capacity Each 24,938
158 -- Do -- but of 60 (30 x 2) KVAR capacity Each 29,688
159 -- Do -- but of 75 (25 x 3) KVAR capacity Each 37,877
160 -- Do -- but of 80 (20 x 4) KVAR capacity Each 40,257
161 -- Do -- but of 100 ( 25 x 4) KVAR capacity Each 50,478
APFC PANEL WITH MPP-H CAPACITOR AND MCCB AS INCOMER
Supply and install 100 KVAR with 5 steps
162 Each 4,96,869
(50 + 25 + 15 + 5 + 5)
163 125 KVAR with 5 steps (2x12.5 + 2x25 + 50) Each 5,61,925

Page 18 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

150 KVAR with 6 steps (2x12.5 + 3x25 +


164 Each 6,35,763
50)
175 KVAR with 6 steps (2x12.5 + 2x25 +
165 Each 6,91,181
2x50)
200 KVAR with 6 steps (2x12.5 + 1x25 +
166 Each 7,74,636
3x50)
167 225 KVAR with 6 steps (2x12.5 + 4x50) Each 7,83,069
168 250 KVAR with 6 steps (2x25 + 4x50) Each 8,90,688
275 KVAR with 6 steps (1x100 + 3x50 +
169 Each 9,82,681
2x12.5)
300 KVAR with 6 steps (1x100 + 3x50 +
170 Each 10,31,593
2x25)
350 KVAR with 8 steps (1x100 + 3x50 +
171 Each 12,28,656
4x25)
400 KVAR with 8 steps (2x100 + 2x50 +
172 Each 14,11,150
4x25)
450 KVAR with 8 steps (2x100 + 4x50 +
173 Each 15,38,914
2x25)
CAPACITOR MPP-S
Supply and fix capacitor metalized poly
propylene Type S (MPPS) for 3 phase ,
174 Each 2,296
440 V,50 Hz System for permissible non-
linear load 10% of capacity 5 KVAR
175 -- do -- but of 7.5 KVAR capacity Each 3,143
176 -- do -- but of 10 KVAR capacity Each 3,926
177 -- do-- but of 15 KVAR capacity Each 5,724
178 -- do-- but of capacity 20 KVAR Each 7,396
179 -- do-- but of 25 KVAR capacity Each 9,078
180 -- do-- but of 30 KVAR capacity Each 10,951
181 -- do -- but of 40 (20 x 2) KVAR capacity Each 14,611
182 -- do -- but of 50 (25 x 2) KVAR capacity Each 18,209
183 -- do-- but of 60 (20 x 3) KVAR capacity Each 21,171
184 -- do-- but of 75 (25 x 3) KVAR capacity Each 27,329
185 -- do-- but of 80 (20 x 4) KVAR capacity Each 28,143
186 -- do-- but of 100 ( 25 x 4) KVAR capacity Each 36,427
CAPACITOR MDXL
Supply and fix MDXL Double metalized
paper (Extra Low Loss) Capacitor for 3
187 Each 4,497
phase, 440 V, 50 Hz system for permissible
non- leaner load 20% of capacity 5 KVAR
188 -- do-- but of 7.5 KVAR capacity Each 6,444
189 -- do-- but of 10 KVAR capacity Each 8,380
190 -- do-- but of 15 KVAR capacity Each 12,294

Page 19 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

191 -- do-- but of 20 KVAR capacity Each 16,072


192 -- do-- but of 25 KVAR capacity Each 19,923
193 -- do-- but of 30 KVAR capacity Each 23,848
194 -- do-- but of 40 (20 x 2) KVAR capacity Each 32,523
195 -- do-- but of 50 (25 x 2) KVAR capacity Each 40,575
196 -- do-- but of 60 (30 x 2) KVAR capacity Each 47,388
197 -- do-- but of 75 (25 x 3) KVAR capacity Each 60,634
198 -- do-- but of 80 (20 x 4) KVAR capacity Each 62,814
199 -- do-- but of 100 ( 25 x 4) KVAR capacity Each 80,832
APFC PANEL WITH MD-XL CAPACITOR AND MCCB AS INCOMER
Supply and install 100 KVAR with 5 steps
200 Each 5,83,657
(50 + 25 + 15 + 5 + 5)
125 KVAR with 5 steps (2x12.5 + 2x25 +
201 Each 6,24,443
50)
150 KVAR with 6 steps (2x12.5 + 3x25 +
202 Each 7,18,055
50)
175 KVAR with 6 steps (2x12.5 + 2x25 +
203 Each 7,76,266
2x50)
200 KVAR with 6 steps (2x12.5 + 1x25 +
204 Each 8,32,541
3x50)
205 225 KVAR with 6 steps (2x12.5 + 4x50) Each 8,80,415
206 250 KVAR with 6 steps (2x25 + 4x50) Each 9,40,086
275 KVAR with 6 steps (1x100 + 3x50 +
207 Each 9,95,303
2x12.5)
300 KVAR with 6 steps (1x100 + 3x50 +
208 Each 10,37,793
2x25)
350 KVAR with 8 steps (1x100 + 3x50 +
209 Each 12,44,198
4x25)
400 KVAR with 8 steps (2x100 + 2x50 +
210 Each 14,02,411
4x25)
450 KVAR with 8 steps (2x100 + 4x50 +
211 Each 15,12,814
2x25)
HT 11 KV CAPACITOR
Supply and fix power factor improvement
single phase static 12 KV capacitor with
212 KVAR 371
manual control up to 60 KVAR (180 KVAR
in three phase)
213 -- do -- but exceeding 60 KVAR KVAR 360
LT SWITCHES
(SUITABLE FOR EXTERNAL MOUNTING)

Page 20 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix switch with sheet steel


enclosure 500 V, 3 phase with HRC fuses
214 Each 4,412
complete with Neutral link of capacity 32
Amps.
215 -- do -- but of capacity 63 Amps Each 5,312
216 -- do -- - but of capacity 100 Amps Each 8,803
217 -- do -- but of capacity 125 Amps Each 9,946
218 -- do -- but of capacity 160 Amps Each 11,448
219 -- do -- but of capacity 200 Amps Each 13,405
220 -- do -- but of capacity 250 Amps Each 15,765
221 -- do -- but of capacity 315 Amps Each 19,256
222 -- do -- but of capacity 400 Amps Each 23,033
LT SWITCHES
SWITCH FUSE UNIT SUITABLE FOR INTERNAL MOUNTING IN PANEL

Supply and fix switch fuse unit TPN 500


Volts, 3 phase with HRC fuses suitable for
223 Each 2,550
interior mounting in panel of capacity 32
Amp .
224 -- do -- but of capacity 63 Amps TPN Each 3,249
225 -- do -- but of capacity 100 Amps TPN Each 6,550
226 -- do -- but of capacity 125 Amps TPN Each 7,756
227 -- do -- but of capacity 250 Amps TPN Each 12,369
228 -- do -- but of capacity 400 Amps TPN Each 19,256
RESIDUAL CURRENT CIRCUIT BREAKER (RCCB)
Supply and fix RCCB of 2 pole , 25 Amp
229 rating with sensitivity of 30 mA suitable for Each 3,323
240 Volts .
230 -- do -- but for 40 Amp Each 3,587
231 -- do -- but for 63 Amp Each 4,444
Supply and fix RCCB of 4 pole , 25 Amp
232 rating with sensitivity of 30 mA suitable for Each 4,275
415 Volts
233 -- do -- but for 40 Amp Each 4,285
234 -- do -- but for 63 Amp Each 4,772
RCCB WITH OVER LOAD AND SHORT CIRCUIT (RCCB+MCB)
Supply and fix RCCB with MCB of 2 pole , 6
235 Amp rating with sensitivity of 30 mA suitable Each 3,957
for 240 Volts
236 -- do -- but for 10 Amp Each 3,957
237 -- do -- but for 16 Amp Each 3,915
238 -- do -- but for 20 Amp Each 3,915

Page 21 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

239 -- do -- but for 25Amp Each 3,915


240 -- do -- but for 32 Amp Each 4,031
241 -- do -- but for 40 Amp Each 4,592

MOULDED CASE CIRCUIT BREAKER (MCCB)


WITH THERMAL BASED RELEASE
3 POLE
Supply and fix 3 Pole MCCB 32 to 100 Amp,
242 Each 2,772
50 Hz, 415 V with rupturing capacity 10 KA.
3 Pole MCCB 12 to 63 Amp, 50 Hz, 415 V
243 Each 6,137
with rupturing capacity 25 KA
3 Pole MCCB 63 to 100 Amp, 50 Hz, 415 V
244 Each 6,380
with rupturing capacity 25 KA

3 Pole MCCB 100 to 125 Amp, 50 Hz, 415 V


245 Each 9,480
with rupturing capacity 35 KA.

3 Pole MCCB 125 to160 Amp, 50 Hz, 415 V


246 Each 11,850
with rupturing capacity 35 KA.
3 Pole MCCB 160 to 200 Amp, 50 Hz, 415 V
247 Each 15,595
with rupturing capacity 35 KA.
3 Pole MCCB 200 to 250 Amp, 50 Hz, 415 V
248 Each 18,717
with rupturing capacity 35 KA.
4 POLE MCCB
Supply and fix 4 Pole MCCB 12 to 63 Amp,
249 Each 7,576
50 Hz, 415 V with rupturing capacity 25 KA
4 Pole MCCB 63 to 100 Amp, 50 Hz, 415 V
250 Each 7,998
with rupturing capacity 25 KA.
4 Pole MCCB 100 to 125 Amp, 50 Hz, 415 V
251 Each 11,882
with rupturing capacity 35 KA.
4 Pole MCCB 125 to 160 Amp, 50 Hz, 415 V
252 Each 14,961
with rupturing capacity 35 KA.
4 Pole MCCB 160 to 200 Amp, 50 Hz, 415 V
253 Each 19,531
with rupturing capacity 35 KA
4 Pole MCCB 200 to 250 Amp, 50 Hz, 415 V
254 Each 23,774
with rupturing capacity 35 KA.
4 Pole MCCB 250 to 320 Amp, 50 Hz, 415 V
255 Each 39,411
with rupturing capacity 35 KA
4 Pole MCCB 320 to 400 Amp, 50 Hz, 415 V
256 Each 33,148
with rupturing capacity 36 KA
4 Pole MCCB 400 to 500 Amp, 50 Hz, 415 V
257 Each 39,474
with rupturing capacity 35 KA
HIGH BREAKING CAPACITY MCCB

Page 22 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix 3 Pole MCCB 100 to 125


258 Amp, 50 Hz, 415 V with rupturing capacity Each 9,371
50 KA
Supply and fix 3 Pole MCCB 125 to 160
259 Amp, 50 Hz 415 V with rupturing capacity 50 Each 11,053
KA
Supply and fix 3 Pole MCCB 160 to 200
260 Amp, 50 Hz ,415 V with rupturing capacity Each 13,040
50 KA
Supply and fix 3 Pole MCCB 200 to 250
261 Amp 50 Hz 415 V with rupturing capacity 50 Each 15,846
KA
Supply and fix 3 Pole MCCB 250 to 320
262 Amp, 50 Hz, 415 V with rupturing capacity Each 28,609
50 KA
Supply and fix 4 Pole MCCB 100 to 125
263 Amp, 50 Hz, 415 V with rupturing capacity Each 26,302
50 KA
Supply and fix 4 Pole MCCB 125 to 160
264 Amp, 50 Hz, 415 V with rupturing capacity Each 26,715
50 KA
Supply and fix 4 Pole MCCB 160 to 200
265 Amp,50 Hz, 415 V with rupturing capacity 50 Each 27,255
KA
Supply and fix 4 Pole MCCB 200 to 250
266 Amp, 50 Hz, 415 V with rupturing capacity Each 28,143
50 KA
Supply and fix 4 Pole MCCB 250 to 320
267 Amp, 50 Hz, 415 V with rupturing capacity Each 37,538
50 KA
Supply and fix 4 Pole MCCB 320 to 400
268 Amp, 50 Hz ,415 V with rupturing capacity Each 37,538
50 KA
Supply and fix 4 Pole MCCB 400 to 500
269 Amp, 50 Hz, 415 V with rupturing capacity Each 37,538
50 KA
Supply and fix 4 Pole MCCB 500 to 630
270 Amp, 50 Hz ,415 V with rupturing capacity Each 49,928
50 KA
MCCB WITH MICROPROCESSOR BASED RELEASE
Supply and fix 3 Pole MCCB 63 Amp
271 Each 14,992
,50Hz, 415 V with rupturing capacity 35 KA

Page 23 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix 3 Pole MCCB 160 Amp


272 Each 20,547
,50Hz, 415 V with rupturing capacity 35 KA
Supply and fix 3 Pole MCCB 250 Amp
273 Each 26,239
,50Hz, 415 V with rupturing capacity 35 KA
Supply and fix 3 Pole MCCB 400 Amp
274 Each 31,984
,50Hz ,415 V with rupturing capacity 35 KA
Supply and fix 3 Pole MCCB 630 Amp
275 Each 35,570
,50Hz, 415 V with rupturing capacity 35 KA
Supply and fix 4 Pole MCCB 63 Amp
276 Each 21,086
,50Hz, 415 V with rupturing capacity 35 KA
Supply and fix 4 Pole MCCB 160 Amp
277 Each 26,842
,50Hz, 415 V with rupturing capacity 35 KA
4 Pole MCCB 250 Amp ,50Hz, 415 V with
278 Each 33,126
rupturing capacity 35 KA
Supply and fix4 Pole MCCB 400 Amp
279 Each 39,919
,50Hz ,415 V with rupturing capacity 35 KA
Supply and fix 4 Pole MCCB 600 Amp
280 Each 48,986
,50Hz, 415 V with rupturing capacity 35 KA
ON LOAD CHANGE OVER SWITCH TPN VERSION
Supply and fix ON LOAD change over
281 switch 415V in sheet metal enclosures 4 Each 7,999
pole of capacity 63 Amps.
282 - do -- but of capacity 125 Amps. Each 13,765
283 -- do -- but of capacity 160 Amps. Each 15,669
284 -- do -- but of capacity 200 Amps. Each 17,320
285 -- do -- but of capacity 250 Amps. Each 23,329
286 -- do -- but of capacity 315 Amps. Each 24,768
287 -- do -- but of capacity 400 Amps. Each 35,687
288 -- do -- but of capacity 630 Amps. Each 41,675
INDUSTRIAL WALL MOUNTED PLUG SOCKET SUITABLE FOR IP44
DEGREE OF PROTECTION
289 Supply and fix 16 Amps rating 2P+E Each 900
290 -- do -- but 3P+E Each 1,016
291 -- do -- but 3P+N+E Each 1,016
292 Supply and fix 32 Amps rating 2P+E Each 1,080
293 -- do -- but 3P+E Each 1,207
294 -- do -- but 3P+N+E Each 1,207
INDUSTRIAL WALL MOUNTED PLUG SOCKET SUITABLE FOR IP67
DEGREE OF PROTECTION
295 Supply and fix 16 Amps rating 2P+E Each 1,260
296 -- Do -- but 3P+E Each 1,418
297 -- Do -- but 3P+N+E Each 1,450
298 Supply and fix 32 Amps rating 2P+E Each 1,450

Page 24 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

299 -- Do -- but 3P+E Each 1,778


300 -- Do -- but 3P+N+E Each 2,106
INDUSTRIAL PANEL MOUNTED PLUG SOCKET SUITABLE FOR IP44
DEGREE OF PROTECTION
301 Supply and fix 16 Amps rating 2P+E Each 805
302 -- do -- but 3P+E Each 953
303 -- do -- but 3P+N+E Each 963
304 Supply and fix 32 Amps rating 2P+E Each 984
305 -- do -- but 3P+E Each 1,080
306 -- do -- but 3P+N+E Each 1,080
INDUSTRIAL PANEL MOUNTED PLUG SOCKET SUITABLE FOR IP67
DEGREE OF PROTECTION
307 Supply and fix 16 Amps rating 2P+E Each 1,122
308 -- do -- but 3P+E Each 1,164
309 -- do -- but 3P+N+E Each 1,164
310 Supply and fix 32 Amps rating 2P+E Each 1,323
311 -- do -- but 3P+E Each 1,365
312 -- do -- but 3P+N+E Each 1,397
METAL PLUG AND SOCKET WITH MCB AND STEEL ENCLOSURE
Supply and fix 20 Amps SPN MCB metallic
313 Each 1,418
P&S
Supply and fix 20 Amps TP MCB metallic
314 Each 3,111
P&S
Supply and fix 32 Amps TP MCB metallic
315 Each 3,651
P&S
316 Supply and fix 20 Amps SPN AC Box Each 1,408
VOLTAGE STABILISER
Supply and fix Voltage stabilizer for
automatic operation, single phase naturally
air cooled indoor type & designed for input
317 Each 3,196
variation between 170 V to 250 V with
output voltage stabilized at 230 V with
accuracy of 2.5% and of capacity 0 .5 KVA
318 -- do -- but of capacity 1.0 KVA Each 6,454
319 -- do -- but of capacity 2.0 KVA Each 7,745
320 -- do -- but of capacity 3.0 KVA Each 8,972
321 -- do -- but of capacity 4.0 KVA Each 10,655
322 -- do -- but of capacity 5.0 KVA Each 11,607
SERVO CONTROLLED OIL COOLED STABILIZER

Page 25 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix Voltage stabilizer for


automatic operation, three phase, naturally
oil cooled, indoor type & designed for input
323 variation between 300 V to 480 V with Each 74,367
output voltage stabilized at 415 with
accuracy 2.5% and speed of correction 8
Volts per second and of capacity 10 KVA
324 -- do -- but of capacity 15 KVA Each 82,271
325 -- do -- but of capacity 20 KVA Each 95,813
326 -- do -- but of capacity 25 KVA Each 1,13,164
327 -- do -- but of capacity 30 KVA Each 1,31,806
328 -- do -- but of capacity 50 KVA Each 1,95,191
329 -- do -- but of capacity 75 KVA Each 2,74,562
330 -- do -- but of capacity 100 KVA Each 3,20,585
331 -- do -- but of capacity 150 KVA Each 4,56,379
332 -- do -- but of capacity 200 KVA Each 5,38,872
333 -- do -- but of capacity 250 KVA Each 6,39,466
334 -- do -- but of capacity 300 KVA Each 7,24,297
335 -- do -- but of capacity 400 KVA Each 10,35,211
336 -- do -- but of capacity 500 KVA Each 13,29,007
337 -- do -- but of capacity 1000 KVA Each 21,89,013
338 -- do -- but of capacity 1500 KVA Each 28,96,117
339 -- do -- but of capacity 2000 KVA Each 39,42,891
UPS
Supply and fix UPS for 30 min back up
340 single phase AC input 160 to 260 V and out Each 33,931
put 230 1% of capacity 1KVA
341 -- do-- but of capacity 2 KVA Each 65,501
342 -- do-- but of capacity 3 KVA Each 78,578
343 -- do-- but of capacity 5 KVA Each 1,26,474
Supply and fix UPS for 30 min back up
344 three phase AC input 300 to 450V and out Each 4,62,812
put 415 V 1% of capacity 7.5 KVA
345 -- do-- but of capacity 10 KVA Each 5,79,023
346 -- do-- but of capacity 15 KVA Each 6,37,922
347 -- do-- but of capacity 20 KVA Each 6,55,971
348 -- do-- but of capacity 30 KVA Each 9,68,801
Supply and fix UPS for 30 min back up three
phase AC input 300 to 450V and out put
349 Each 2,16,700
single phase AC out put Voltage 230 V
1% of capacity 7.5 KVA
350 -- do-- but of capacity 10 KVA Each 2,31,078
351 -- do-- but of capacity 15 KVA Each 3,10,809

Page 26 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

352 -do but of capacity 20 KVA Each 3,55,266


353 -do but of capacity 30 KVA Each 7,24,889

ARMOURED XLPE CABLES (LT) 1.1 KV GRADE


Supply, laying and testing cable XLPE
Insulated ,screened, PVC bedded,
galvanized steel strip or wire armoured,
354 RM 318
electric power cables (heavy duty) 1100
Volts grade with stranded aluminium
conductor of size 6.0 sq mm 2 core
355 do-- but size 10 sq mm 2 core RM 350
356 -- do-- but size 16 sq mm 2 core RM 392
357 -- do-- but size 25 sq mm 2 core RM 392
358 - do-- but size 35 sq mm 2 core RM 445
359 -- do-- but size 6 sq mm 4 core RM 360
360 -- do-- but size 10 sq mm 4 core RM 413
361 -- do-- but size 16 sq mm 4 core RM 434
362 -- do-- but size 25 sq mm 4 core RM 540
363 -- do-- but size 35 sq mm 3 core RM 593
364 -- do-- but size 50 sq mm 3 core RM 699
365 -- do-- but size 70 sq mm 3 core RM 879
366 -- do-- but size 95 sq mm 3 core RM 1,069
367 -- do-- but size 120 sq mm 3 core RM 1,344
368 -- do-- but size 150 sq mm 3 core RM 1,545
369 -- do-- but size 185 sq mm 3 core RM 1,873
370 -- do-- but size 240 sq 3 core RM 2,307
371 -- do-- but size 300 sq mm 3 core RM 2,772
372 -- do-- but size 400 sq mm 3 core RM 3,492
373 -- do-- but size 500 sq mm 3 core RM 4,476
Note: Item No 354-373 Rate of under ground cable includes earth Work, sand
cushioning, brick or PCC covering, light Grade GI tubing where necessary,testing
etc.
ARMOURED XLPE CABLE 11 KV GRADE
Supply, laying & testing cable XLPE
insulated, screened, PVC bedded,
galvanized steel strip or wire armoured,
374 RM 1,323
electric power cables (heavy duty)with
stranded aluminium conductor, 11000 volts
grade, of size 3 core 35 sq mm.
375 - do-- but of size 50 sq mm RM 1,461
376 -- do-- but of size 70 sq mm RM 1,662
377 -- do-- but of size 95 sq mm RM 1,958

Page 27 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

378 -- do-- but of size 120 sq mm RM 2,180


379 -- do-- but of size 150 sq mm RM 2,392
380 -- do-- but of size 185 sq mm RM 2,751
381 -- do-- but of size 240 sq mm RM 3,217
382 -- do-- but of size 300 sq mm RM 3,682
383 -- do-- but of size 400 sq mm RM 4,381
Note: Item No 374-383 Rate of under ground cable includes earth Work, sand
cushioning, brick or PCC/RCC covering, light Grade GI tubing where
necessary,testing etc.
ARMOURED XLPE CABLE 33 KV GRADE

Supply, laying & testing cable XLPE


insulated screened PVC bedded, galvanized
steel strip or wire armoured, electric power
384 RM 3,270
cables (heavy duty) with stranded
aluminium conductor, 33000 volts grade, of
size 3 core 95 sq mm
385 -- do-- but of size 120 sq mm RM 3,587
386 -- do-- but of size 150 sq mm RM 3,873
387 -- do-- but of size 185 sq mm RM 4,285
388 -- do-- but of size 240 sq mm RM 4,814
389 -- do-- but of size 300 sq mm RM 5,354
Note:Item No 384-389 Rate of under ground cable includes earth Work, sand
cushioning, brick or PCC/RCC covering, light Grade GI tubing where
necessary,testing etc.
CONTROL CABLE COPPER CONDUCTOR
Supply, laying & testing PVC insulated, PVC
sheathed cable galvanized steel strip or
wire armoured, electric control cables
390 RM 318
(Heavy duty) with stranded copper
conductor of size 1.5 sq mm ,2 core, 1100
Volts grade.
391 do-- but size 2 Core ,2.5 ,Sq mm RM 371
392 -- do-- but size 2 Core, 4 Sq mm RM 434
393 -- do-- but size 3 Core, 1.5 Sq mm RM 360
394 -- do-- but size 3 Core ,2.5 Sq mm RM 424
395 -- do-- but size 3 Core ,4 Sq mm RM 508
396 -- do-- but size 4 Core, 1.5 Sq mm RM 403
397 -- do-- but size 4 Core ,2.5 Sq mm RM 477
398 -- do-- but size 4 Core, 4 Sq mm RM 604
399 -- do-- but size 5 Core, 1.5 Sq mm RM 434
400 -- do-- but size 6 Core, 1.5 Sq mm RM 466
401 -- do-- but size 7 Core ,1.5 Sq mm RM 498
402 -- do-- but size 8 Core ,1.5 Sq mm RM 540

Page 28 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

CABLE JOINTING KIT


Supply and fix cable jointing kit for 1.1 KV
grade cable for straight through joint
complete with Jointing material heat Shrink
403 Each 5,100
type and accessories suitable for 3 / 4
core XLPE, armoured, Al conductor cable
of size 25 to 50 sqmm,Indoor/Outdoor type
404 -- do-- but for cable of size 70 to 95 sq mm. Each 7,385
-- do-- but for cable of size 120 to 150 sq
405 Each 7,385
mm.
-- do-- but for cable of size 185 to 240 sq
406 Each 12,972
mm
-- do-- but for cable of size 300 to 400 sq
407 Each 13,670
mm.
Supply and fix cable jointing kit for 11 KV
grade cable for in door termination, heat
shrink type, joint complete with jointing
408 Each 11,374
material and accessories suitable for3 core
XLPE, armoured, Al conductor cable of size
16 sqmm to 50 sqmm
-- do-- but for cable of size 70 to 120 sq
409 Each 13,501
mm.
-- do-- but for cable of size 150 to 225 sq
410 Each 15,744
mm.
-- do-- but for cable of size 240 to 300 sq
411 Each 16,421
mm.
412 -- do-- but for cable of size 400 sq mm Each 17,468

Supply and fix cable jointing kit for 11 KV


grade cable for outdoor termination , heat
shrink type, joint complete with jointing
413 Each 17,267
material and accessories suitable for 3 core
XLPE, armoured, Al conductor cable of size
16 sqmm to 50 sqmm
-- do-- but for cable of size 70 to 120 sq
414 Each 19,044
mm
-- do-- but for cable of size 150 to 225 sq
415 Each 20,229
mm
-- do-- but for cable of size 240 to 300 sq
416 Each 22,705
mm
417 -- do-- but for cable of size 400 sq mm Each 23,784

Page 29 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix cable jointing kit for 33 KV


grade cable for in door termination heat
shrink type joint complete with jointing
418 Each 21,362
material and accessories suitable for 3 core
XLPE, armoured ,Al conductor cable of size
25 sqmm to 50 sqmm
419 -- do-- but for cable of size 70 to 95 sq mm. Each 22,494
-- do-- but for cable of size 120 to 185 sq
420 Each 32,365
mm.
-- do-- but for cable of size 240 to 400 sq
421 Each 37,327
mm.
Supply and fix cable jointing kit for 33 KV
grade cable for outdoor termination heat
shrink type joint complete with jointing
422 Each 28,344
material and accessories suitable for 3 core
XLPE, armoured, Al conductor cable of size
25 sqmm to 50 sqmm
423 -- do-- but for cable of size 70 to 95 sq mm Each 34,957
-- do-- but for cable of size 120 to 185 sq
424 Each 44,585
mm.
-- do-- but for cable of size 240 to 400 sq
425 Each 58,064
mm
Supply and fix cable jointing kit for 11 KV
grade cable for indoor termination cold
shrink type joint complete with jointing
426 Each 6,645
material and accessories suitable for 3 core
XLPE, armoured, Al conductor cable of size
50 sqmm to 95 sqmm
-- do-- but for cable of size 120 to 185 sq
427 Each 6,941
mm.
-- do -- but for cable of size 240 to 400 sq
428 Each 9,004
mm.
Supply and fix cable jointing kit for 11 KV
grade cable for out door termination cold
shrink type joint complete with jointing
429 Each 11,099
material and accessories suitable for 3 core
XLPE, armoured, Al conductor cable of size
50 Sqmm to 95 Sqmm
-- do-- but for cable of size 120 to 185 sq
430 Each 11,437
mm
-- do-- but for cable of size 240 to 400 sq
431 Each 14,125
mm

Page 30 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix cable jointing kit for 11 KV


grade cable for straight through cold shrink
type joint complete with jointing material and
432 Each 19,171
accessories suitable for 3 core XLPE,
armoured, Al conductor cable of size 50
Sqmm to 95 sqmm, Indoor/Outdoor type
-- do-- but for cable of size 120 to 185 sq
433 Each 20,505
mm.
-- Do -- but for cable of size 240 to 400 sq
434 Each 30,058
mm
Supply and fix cable jointing kit for 33 KV
grade cable for indoor termination cold
shrink type joint complete with jointing
435 Each 12,474
material and accessories suitable for 3 core
XLPE armoured Al conductor cable of size
50 Sqmm to 70 Sqmm
-- do-- but for cable of size 70 to 120 sq
436 Each 16,347
mm
-- do-- but for cable of size 150 to 240 sq
437 Each 16,526
mm
-- do-- but for cable of size 300 to 400 sq
438 Each 16,738
mm
Supply and fix cable jointing kit for 33 KV
grade cable for outdoor termination cold
shrink type joint complete with jointing
439 Each 17,944
material and accessories suitable for 3 core
XLPE armoured Al conductor cable of size
50 Sqmm to 120 Sqmm
-- do-- but for cable of size 150 to 240 sq
440 Each 18,463
mm
-- do-- but for cable of size 300 to 400 sq
441 Each 19,108
mm
Supply and fix cable jointing kit for 33 KV
grade cable for straight through heat shrink
type joint complete with jointing material and
442 Each 66,337
accessories suitable for 3 core XLPE
armoured Al conductor cable of size 50
Sqmm to 120 Sqmm, Indoor/Outdoor type
-- do-- but for cable of size 150 to 240 sq
443 Each 1,16,412
mm
-- do-- but for cable of size 300 to 400 sq
444 Each 1,29,309
mm
CABLE GLAND

Page 31 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix double compression copper


stain less steel gland for fixing armoured
445 Each 223
cable in panel of size 2 core 6 Sq mm to 16
sq mm size
-- do-- but for cable of size 25 to 35 sq
446 Each 392
mm.
-- do-- but for cable of size 4 core 6 to
447 Each 297
16 sq mm above.
-- do-- but for cable of size 4 core 25 to
448 Each 392
35 sq mm Above.
-- do-- but for cable of size 3 core 50 sq
449 Each 540
mm to 70 sq mm above.
-- do-- but for cable of size 3.5 core 95 sq
450 Each 678
mm to 120 sqmm
-- do-- but for cable of size 3.5 core 150
451 Each 921
sq mm
-- do-- but for cable of size 3.5 core 240 sq
452 Each 1,418
mm to 300 sq mm above
-- do-- but for cable of size 3 .5 core 400
453 Each 1,767
sq mm
AERIAL BUNCHED CABLE (ABC)
LT ABC ON PCC POLES
Supply and fix LT overhead lines on 9
meter PCC poles with XLPE insulated AB
454 RM 615
cable 3-core X 50 sq mm + 1-core x 35 sq
mm
dobut of size 3-core X 70 sq mm + 1-core
455 RM 713
X 50 sq mm
dobut of size 3-core X 95 sq mm + 1-core
456 RM 815
X 70 sq mm
dobut of size 3-core X 120 sq mm X 1-
457 RM 880
core X 70 sq mm
dobut of size 3-core X 150 sq mm + 1-
458 RM 964
core X 95 sq mm
dobut of size 3-core X 185 sq mm + 1-
459 RM 1,260
core X 150 sq mm
dobut of size 3-core X 240 sq mm + 1-
460 RM 1,500
core X 185 sq mm
11 KV HT ABC ON PCC POLES
Supply and fix HT overhead lines on 11
461 meter PCC poles with XLPE insulated AB RM 1,196
cable 3-core X 70 sq mm + 1 x 50 sq mm

Page 32 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

dobut of size 3-core X 95 sq mm + 1 X 70


462 RM 1,347
sq mm
dobut of size 3-core X 185 sq mm + 1-
463 RM 1,824
core X 150 sq mm
LT ABC ON STEEL POLES
Supply and fix LT overhead lines on 9 meter
464 steel poles with XLPE insulated AB cable RM 1,062
3-core X 50 sq mm + 1 x 35 sq mm.
dobut of size 3-core X 70 sq mm + 1-core
465 RM 1,159
X 50 sq mm
dobut of size 3-core X 95 sq mm + 1-core
466 RM 1,262
X 70 sq mm
dobut of size 3-core X 120 sq mm X 1-
467 RM 1,327
core X 70 sq mm
dobut of size 3-core X 150 sq mm + 1-
468 RM 1,410
core X 95 sq mm
dobut of size 3-core X 185 sq mm + 1-
469 RM 1,706
core X 150 sq mm
dobut of size 3-core X 240 sq mm + 1-
470 RM 1,946
core X 185 sq mm
11 KV HT ABC ON STEEL POLES
Supply and fix HT overhead lines on 11
471 meter steel poles with XLPE insulated AB RM 1,855
cable 3-core X 70 sq mm + 1 x 50 sq mm.
dobut of size 3-core X 95 sq mm + 1 X 70
472 RM 2,006
sq mm
dobut of size 3-core X 185 sq mm + 1-
473 RM 2,494
core X 150 sq mm
Note:Item No 454-473 Rates include cost of PCC/steel poles their foundation,
coping & earthing. Pole spacing is considered as 30 Meter and 50 Meter
respectively for LT and HT
LT ABC ON EXISTING POLES
Supply and fix LT overhead lines on existing
474 poles with XLPE insulated AB cable 3-core RM 224
X 50 sq mm + 1 x 35 sq mm.
dobut of size 3-core X 70 sq mm + 1-core
475 RM 321
X 50 sq mm
dobut of size 3-core X 95 sq mm + 1-core
476 RM 424
X 70 sq mm
dobut of size 3-core X 120 sq mm X 1-
477 RM 489
core X 70 sq mm
dobut of size 3-core X 150 sq mm + 1-
478 RM 572
core X 95 sq mm

Page 33 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

dobut of size 3-core X 185 sq mm + 1-


479 RM 868
core X 150 sq mm
dobut of size 3-core X 240 sq mm + 1-
480 RM 1,108
core X 185 sq mm
11 KV HT ABC ON EXISTING POLES
Supply and fix HT overhead lines on existing
481 poles with XLPE insulated AB cable 3-core RM 693
X 70 sq mm + 1 x 50 sq mm.
dobut of size 3-core X 95 sq mm + 1 X 70
482 RM 844
sq mm
dobut of size 3-core X 185 sq mm + 1-
483 RM 1,332
core X 150 sq mm
LT OVER HEAD LINE ON PCC POLE WITH ACSR CONDUCTOR
Supply and fix LT OH lines on 9 meter PCC
poles with Continuous GI earth wire incl
484 earthing of poles, cross arms, insulators etc RM 422
and ACSR conductors of size 2 of 6/1 x 2.11
mm (Squirrel).
485 do-- but of size 2 of 6/1 x 2.59 mm (Weasel) RM 472
486 do-- but of size 4 of 6/1 x 2.11 mm (Squirrel) RM 492
do-- but of size 3 of 6/1 x 2.59 mm (Weasel),
487 RM 519
1 of 6/1 x 2.11mm (Squirrel)
do-- but of size 3 of 6/1 x 3.00 mm
488 RM 557
(Ferret),1 of 6/1 x 2.59 mm (Weasel)
do-- but of size 3 of 6/1 x 3.50 mm
489 RM 586
(Rabbit),1 of 6/1 x 2.59 mm (Weasel)
do-- but of size 3 of 6/1 x 3.66 mm (Mink),1
490 RM 623
of 6/1 x 2.59 mm (Weasel)
do-- but of size 3 of 6/1 x 3.99 mm
491 RM 663
(Beaver), 1 of 6/1 x 3.00mm (Ferret)
do-- but of size 3 of 6/1 x 4.22 mm (Otter),1
492 RM 718
of 6/1 x 3.99 mm (Beaver)
do-- but of size 3 of 6/1 x 4.50 mm (Cat), 1
493 RM 750
of 6/1 x 3.99 mm (Beaver)
do-- but of size 3 of 6/5.28
494 +7/1.76mm(Leopard), 1 of 6/1 x 3.99 mm RM 824
(Beaver)
do-- but of size 3 of 26/2.54
495 +7/1.90mm(Coyota),1 of 6/1 x 3.99 mm RM 843
(Beaver)

do-- but of size 3 of 30/7x3.00 mm


496 RM 1,151
(Panther),1 of 6/1 x 4.72 mm (Dog)

Page 34 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

NOTE : Item No 484-496 Rates are including cost of PCC poles their foundation
and coping. Spacing considered as 30 Meter
LT OVER HEAD LINE ON STEEL TUBULAR POLE WITH ACSR CONDUCTOR
Supply and fix LT OH lines on 9 meter Steel
poles with Continuous GI earth wire incl
497 earthing of poles cross arms, insulators etc RM 744
poles and ACSR conductors of size 2 of 6/1
x 2.11 mm (Squirrel).
498 do-- but of size 2 of 6/1 x 2.59 mm (Weasel) RM 795
499 do-- but of size 4 of 6/1 x 2.11 mm (Squirrel) RM 816
do-- but of size 3 of 6/1 x 2.59 mm
500 RM 843
(Weasel),1 of 6/1 x 2.11mm (Squirrel)
do-- but of size 3 of 6/1 x 3.00 mm
501 RM 880
(Ferret),1 of 6/1 x 2.59 mm (Weasel)
do-- but of size 3 of 6/1 x 3.50 mm (Rabbit),
502 RM 908
1 of 6/1 x 2.59 mm (Weasel)
do-- but of size 3 of 6/1 x 3.66 mm (Mink), 1
503 RM 945
of 6/1 x 2.59 mm (Weasel)
do-- but of size 3 of 6/1 x 3.99 mm
504 RM 987
(Beaver),1 of 6/1 x 3.00mm (Ferret)
do-- but of size 3 of 6/1 x 4.22 mm (Otter),1
505 RM 1,041
of 6/1 x 3.99 mm (Beaver)
do-- but of size 3 of 6/1 x 4.50 mm (cat)
506 RM 1,073
,1 of 6/1 x 3.99 mm (Beaver)
do-- but of size 3 of 6/5.28
507 +7/1.76mm(Leopard),1 of 6/1 x 3.99 mm RM 1,146
(Beaver)
do-- but of size 3 of 26/2.54
508 +7/1.90mm(Coyota),1of 6/1 x 3.99 mm RM 1,165
(Beaver)
do-- but of size 3 of 30/7x3.00 mm
509 RM 1,473
(Panther),1 of 6/1 x 4.72 mm (Dog)
NOTE :Item No 497-509 Rates are including cost of steel poles, their foundation
and coping. Spacing considered as 30 Meter
LT OVER HEAD LINES ON EXISTING POLES
Supply and fix LT OH lines on existing poles
510 with ACSR conductors size 2 of RM 67
6/1x2.11mm(Squirrel).
do -- but of size 2 of 6/1 x 2.59 mm
511 RM 84
(Weasel)
do-- but of size 4 of 6/1 x 2.11 mm
512 RM 105
(Squirrel)

Page 35 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

do-- but of size 3 of 6/1 x 2.59 mm


513 RM 132
(Weasel),1 of 6/1 x 2.11mm (Squirrel)
do-- but of size 3 of 6/1 x 3.00 mm
514 RM 170
(Ferret),1 of 6/1 x 2.59 mm (Weasel)
do-- but of size 3 of 6/1 x 3.50 mm
515 RM 198
(Rabbit),1 of 6/1 x 2.59 mm (Weasel)
do-- but of size 3 of 6/1 x 3.66 mm (Mink),1
516 RM 234
of 6/1 x 2.59 mm (Weasel)
do-- but of size 3 of 6/1 x 3.99 mm
517 RM 276
(Beaver),1 of 6/1 x 3.00mm (Ferret)
do-- but of size 3 of 6/1 x 4.22 mm (Otter),1
518 RM 331
of 6/1 x 3.99 mm (Beaver)
do-- but of size 3 of 6/1 x 4.50 mm (cat)
519 RM 362
,1 of 6/1 x 3.99 mm (Beaver)
do-- but of size 3 of 6/5.28
520 +7/1.76mm(Leopard),1 of 6/1 x 3.99 mm RM 435
(Beaver)
do-- but of size 3 of 26/ 2.54 +7/1.91
521 RM 454
mm(Coyota),1 of 6/1 x 3.99 mm (Beaver)
HT OH LINES ON PCC POLE WITH ACSR CONDUCTOR
Supply and fix HT overhead line of 11KV
on 11 meter PCC poles with continuous GI
522 earth wire, including earthing of Poles cross RM 395
arms, insulators etc and ACSR conductor
of sizes 3 of 6/1 x 2.11 mm (Squirrel)
523 do-- but size 3 of 6/1x2.59 mm (Weasel) RM 423
524 do-- but size 3 of 6/1x3.00 mm (Ferret) RM 450
525 do-- but size 3 of 6/1x3.50 mm (Rabbit) RM 479
526 do-- but size 3 of 6/1x3.66 mm (Mink) RM 514
527 do-- but size 3 of 6/1x3.99 mm (Beaver) RM 545
528 do-- but size 3 of 6/1x4.22 mm (Otter) RM 571
NOTE : Item No 522-528 Rates are including cost of PCC poles, their foundation
and coping .Spacing considered as 50 Meter
HT OH LINES ON STEEL TUBULAR POLE WITH ACSR CONDUCTOR

Supply and fix HT overhead line of 11KV on


11 meter steel poles with continuous GI
529 earth wire, including earthing of poles cross RM 677
arms, insulators etc and ACSRconductor of
sizes 3 of 6/1 x 2.11 mm (Squirrel)

530 do-- but size 3 of 6/1x2.59 mm (Weasel) RM 703

Page 36 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

531 do-- but size 3 of 6/1x3.00 mm (Ferret) RM 732


532 do-- but size 3 of 6/1x3.50 mm (Rabbit) RM 760
533 do-- but size 3 of 6/1x3.66 mm (Mink) RM 795
534 do-- but size 3 of 6/1x3.99 mm (Beaver) RM 826
535 do-- but size 3 of 6/1x4.22 mm (Otter) RM 851
Note:Item No 529-535 Rates are including cost of steel poles their foundation
and coping . Spacing between pole considered is 50 Meter.
HT OVER HEAD LINES ON EXISTING POLES
Supply and fix HT OH lines on Existing
536 Poles with ACSR conductor of size3 of RM 104
6/1x2.11 mm (Squirrel)
537 do-- but size 3 of 6/1x2.59 mm (Weasel) RM 132
538 do-- but size 3 of 6/1x3.00 mm (Ferret) RM 159
539 do-- but size 3 of 6/1x3.50 mm (Rabbit) RM 188
540 do-- but size 3 of 6/1x3.66 mm (Mink) RM 223
541 do-- but size 3 of 6/1x3.99 mm (Beaver) RM 253
542 do-- but size 3 of 6/1x4.22 mm (Otter) RM 279
4 POLE AND 2 POLE STRUCTURE WITH PCC POLE

Supply & erect 4 pole structure on 11 meter


PCC Pole,anti-climbing device, PCC
543 Each 90,930
foundation & cross arms (Bracings) etc for
one incoming and one out going.

Supply & erect 4 pole structure on 11 meter


PCC, with anti-climbing device, PCC
544 Each 1,03,001
foundation & cross arms etc for one
incoming and two out going.

Supply & erect 4 pole structure on 11 meter


PCC Pole,anti-climbing device, PCC
545 Each 1,26,070
foundation & cross arms etc for one
incoming and three out going.

Supply and erect 2 pole structure on 11


546 meter PCC pole , anti-climbing device, PCC Each 45,548
foundation & cross arms etc.
4 POLE AND 2 POLE STRUCTURE WITH STEEL POLE
Supply & erect 4 pole structure on 11 meter
steel tubular pole consisting of pole with
anti-climbing device, PCC foundation &
547 Each 1,58,323
cross arms etc for one incoming and one
out going.

Page 37 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply & erect 4 pole structure on 11 meter


steel tubular pole consisting of pole with
548 anti-climbing device, PCC foundation & Each 1,70,392
cross arms etc for one incoming and two
out going.

Supply & erect 4 pole structure on 11 meter


steel tubular pole consisting of pole with
549 anti-climbing device, PCC foundation & Each 1,93,462
cross arms etc for one incoming and three
out going.

Supply and erect 2 pole structure on 11


meter steel Tubular pole consisting of anti-
550 Each 79,244
climbing device, PCC foundation & cross
arms etc.
Note:Item No 543-550 Cost of 4 & 2 Pole structure only include cost of pole,
foundation and steel bracings but does not include cost of Gang Operated
device,earthing,LA etc.
LIGHTNING ARRESTORS
Supply and fix lightning arrestor HT 11 KV
551 set of 3 45,675
10 KA station class
Supply and fix lightning arrestor HT 33 KV
552 set of 3 59,057
10 KA station class
EARTHING
Earthing of machinery/equipment Installed
at power house/substation, using 32 x 6 mm
Set of 2
553 galvanized MS strip and MS galvanized 14,297
earths
plate of size 600 x 600 x 6 mm ,as earth
electrode
Earthing of machinery/equipment Installed
at power house/substation, using 25 x 3 mm Set of 2
554 24,683
copper strip and copper plate of size 300 x earths
300 x 3 mm, as earth electrode.
Earthing for poles & other
machinery/equipment using 4 mm GI wire
555 as earthing lead and Each 5,966
MS galvanized plate of size 60 cm x 60 cm x
6 mm, as earth electrode.
SERVICE CONNECTIONS

Page 38 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Service connection with 6 sq mm twin core


Weather proof aluminium conductor cable
556 Suspended with No.8 SWG GI wire from Each 2,146
Pole to service bracket & then to meter
Including 40 mm GI pipe service bracket.
-- do -- but with 10 sq mm twin core
557 Each 2,369
Weather Proof cable.
METERS
Supply & fix Microprocessor based Single
phase electronic temper proof energy meter
558 of rating 10 to 60 Amp with optical Each 5,271
communication port, conforming to IS:
13779.
Supply & fix AC single phase static energy
meter of accuracy class 1.0, 240 V, 50 Hz
with Backlit LCD display of rating 5 - 30 A,
(measures and displays KWH ,V, Current I,
559 KW, pf last month history of KWH, MD in Each 3,975
KW) with special features like TOD, temper
logging, optical communication port display
in absence of power with transparent hinge
type box.

Supply & fix AC single phase static energy


meter of accuracy class 1.0, 240 V 50 Hz
with Backlit LCD display of rating 10 - 60 A
(measures and displays KWH ,V, Current I,
560 KW, pf last month history of KWH, MD in Each 4,138
KW) with special features like TOD, temper
logging, optical communication port display
in absence of power with transparent hinge
type box.

Supply & fix Single phase , two wire ,240


volt , 10- 60 A or less, accuracy class 1.0,
561 IS Markied,single source pre payment meter Each 8,520
including CIU & STTD
Supply & fix AC Three phase static energy
meter of accuracy class 1.0, 3 X 240 V ,50
562 Each 6,627
Hz with Backlit LCD display of rating 5 - 20
A (suitable for measurement of KWH only)

Page 39 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply & fix AC Three phase static energy


meter of accuracy class 1.0, 3 X 240 V, 50
563 Each 7,252
Hz with Backlit LCD display of rating 10 - 60
A (suitable for measurement of KWH only)
Supply & fix AC Three phase static energy
meter of accuracy class 1.0 ,3 X 240 V ,50
Hz with Backlit LCD display of rating 10 - 60
A (measures and displays KWH ,V, Current
564 I, KW, pf last month history of KWH, MD in Each 12,268
KW) with special features like TOD, temper
logging, optical communication port display
in absence of power with transparent hinge
type box.
Supply & fix Trivector meter three phase
565 four wire ,3 x 240 volt , 10-60 Amp class 1.0 Each 13,183
with box .
Supply & fix Trivector meter three phase
566 four wire TVM 110 Volt , 1 A/5A class 0.5 Each 31,440
with box .
Supply & fix Trivector meter three phase
567 four wire TVM 110 Volt , 1 A/5A ,class 0.2 Each 63,823
with box .
Supply & fix Meter reading instruments with
suitable software of capacity 16.5 MB to
568 Each 1,26,819
record, reading through optical
communication port of any type of meter.
Supply & fix Microprocessor based three
phase electronic tamper proof energy meter
569 of rating 10 to 60 Amp with optical Each 10,373
communication port conforming to IS:
13779.
Supply & fix Microprocessor based three
phase electronic tamper proof, CT operated,
energy meter for LT supply with optical
570 Each 32,736
communication port, accuracy class 0.5
voltage 3 x 240 V, 1/5 A conforming to IS:
13779.
Supply & fix Microprocessor based three
phase electronic tamper proof HT energy
571 meter with optical communication port, Each 39,219
accuracy class 0.5 rating 3 x 110 V, 1/5 A
conforming to IS: 13779.

Page 40 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply & fix Digital panel meter for Amp,


572 Volt,KWH, power factor and other parameter Each 23,605
flush mounting of size 96 x96 mm
Supply & fix Trivector meter base mounting
573 Each 40,677
of class 0.5
FANS
Supply & fix fans ceiling complete with
574 electronic type regulator and accessories Each 3,098
230 V,1200 mm sweep. BEE 5 star rated
Supply & fix fans ceiling complete with
575 electronic type regulator and accessories Each 2,353
230 V , 1400 mm sweep
Supply & fix exhaust fans AC single phase
576 230/ 240 V of size 300 mm sweep with Each 2,847
louver
577 -- do -- but size 380 mm sweep. Each 3,620
578 -- do -- but size 450 mm sweep. Each 4,888
579 -- do -- but size 600 mm sweep. Each 10,515
Supply & fix exhaust fans AC three phase
580 Each 4,410
415 V of size 380 mm sweep with louver.
581 .-- do -- but size 450 mm sweep. Each 6,086
582 . -- do -- but size 600 mm sweep. Each 10,444
Supply & fix fans table 230 volts single
583 Each 2,010
phase oscillating 400 mm sweep.
Supply & fix Air Circulator fans 230 volts
584 single phase oscillating 450 mm sweep Each 8,225
suitable for wall mounting.
585 . -- do but for 600 mm sweep Each 10,416
586 . -- do but for 750 mm sweep Each 9,800
TIME SWITCHES
Supply and fix time switches 250 V single
587 Phase of 20 Amp rating with contactor fitted Each 5,557
inside steel enclosure
Supply and fix time switches 415 V three
588 Phase of 20 Amp rating with contactor fitted Each 8,136
inside steel enclosure
Supply and fix time switches astro type
(Having longitude and latitude of Indian
589 cities in memory) 250 V single phase of 20 Each 11,132
Amp rating with contactor fitted inside steel
enclosure.
LIGHTING

Page 41 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

STREET LIGHT/FLOOD LIGHT FITTINGS


Supply & fix street light fitting fluorescent
lamp type complete with perplex cover,
590 Each 2,805
reflector, choke starter, bi-pin holders etc for
1 x 40 Watt fluorescent tube
591 . -- do -- but for 2 x 40 Watt tubes Each 3,808
Supply and fix street light 1 x 28 Watt FTL
592 Each 2,846
(T5) IP 43
593 . -- do -- but for 2 x 28 Watt FTL (T5) IP 43 Each 3,530
594 .--do-- but 1 x36 Watt FTL (T8) IP 43 Each 2,690
595 . -- do -- but for 2 x 36 Watt FTL (T8) IP 43 Each 3,513
Supply and fix street light 2 X 14 W (FTL T5)
596 Each 4,484
IP65
Supply and fix street light 4 X 14 W (FTL T5)
597 Each 8,561
IP. 65
Supply and fix street light 2 X 24 W (FTL T5)
598 Each 4,661
IP. 65
Supply and fix street light 4 X 24 W (FTL T5)
599 Each 8,924
IP. 65
Supply and fix CFL street light 1 X 36 W IP.
600 Each 2,457
65
Supply and fix CFL street light 2 X 36 W IP.
601 Each 3,804
65
Supply and fix CFL street light 3 X 36 W IP.
602 Each 8,050
65
Supply & fix street light fitting Mercury
vapour lamp type complete with HPMV
603 lamp, reflector, heat resistant glass bowl, Each 5,274
choke etc complete in all respect for 80 Watt
lamp.
604 . -- do -- but for 125 Watt lamp Each 5,027
605 -- do -- but for 250 Watt lamp. Each 6,902
Supply & fix street light fitting HPSV lamp,
606 ballast, igniter and other accessories for 70 Each 6,105
Watt lamp.
607 -- do -- but for 150 Watt lamp. Each 7,905
608 .-- do -- but for 250 Watt lamp Each 10,944
609 . -- do -- but for 400 Watt lamp. Each 19,483
Supply & fix Flood light fitting, complete
610 with switch gear, control gear unit ,lamp and Each 12,048
fixing for 400 Watt metal halide (MH)
611 . -- do -- same as above but 250 Watt MH Each 10,843

Page 42 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

LED STREET LIGHTS


(Clause of escalation not to applied for LED lights)
612 Supply and fix LED street light 10 W IP 65 Each 3,989
Supply and fix LED street light 35/36 W IP
613 Each 11,829
65
Supply and fix LED street light 70/75 W IP
614 Each 20,081
65
Supply and fix LED street light 100/105/110
615 Each 31,635
W IP 65
Supply and fix LED street light 115/120/125
616 Each 34,385
W IP 65
Supply and fix LED street light 135/140 W
617 Each 35,761
IP 65
618 Supply and fix LED street light170 W IP 65 Each 48,139
619 Supply and fix LED street light 210 W IP 65 Each 52,266
LED FLOOD LIGHT
Supply and fix LED Flood light 35/36/37 W
620 Each 11,691
IP 65
621 Supply and fix LED Flood light 70 W IP 65 Each 18,568
622 Supply and fix LED Flood light 105 W IP 65 Each 41,950
623 Supply and fix LED Flood light 120 W IP 65 Each 48,139
624 Supply and fix LED Flood light 140 W IP 65 Each 52,953
625 Supply and fix LED Flood light 210 W IP 65 Each 72,209
POST TOP LANTERNS
Supply and fix post top lantern light fitting for
626 70 Watt SV lamp complete With all Each 6,707
accessories.
627 . -- do-- but for 80 Watt MV lamp. Each 6,447
628 . -- do-- but for 125 Watt MV lamp. Each 6,381
INDUSTRIAL LIGHT FITTINGS
Supply & fix fluorescent light fitting complete
with choke, condenser, starter, bi-pin lamp
629 Each 1,822
holders and Industrial reflector for 1 x 40
Watt tube.
630 . -- do-- but for 2 x 40 Watt tubes Each 2,539
BULK HEAD FITTING
Supply & fix Bulkhead luminaire for CFL
631 Each 1,486
lamps 1x 9 Watt
632 . -- do-- but for 1 x 13 Watt CFL Each 1,538
INDOOR LIGHT FITTINGS

Page 43 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply & fix fluorescent light fitting


Complete with chokes, condensers,
633 Each 1,301
starter,bi-pin holder, diffuser, polystyrene
louvers 1 x 20 Watt .
634 . -- do -- but for 1 x 40 Watt tube. Each 1,461
Supply &fix fluorescent light fitting complete
with chokes, condensers, starters, bi-
holders housed in stove enamelled
635 Each 2,539
rectangular box and fitting fitted with
polystyrene louvers, end plates suitable for
2 x 20 Watt tube
636 . -- do -- but for 2 x 40 Watt tube. Each 4,645
Supply & fix indoor decorative luminaire 1 X
637 Each 1,635
28 W FTL (T5) IP 43
Supply & fix indoor decorative luminaire 2 X
638 Each 3,190
28 W FTL (T5) IP 43
Supply & fix indoor decorative luminaire 1 X
639 Each 1,822
36/40 W FTL (T8) IP 43
Supply & fix indoor decorative luminaire 2 X
640 Each 3,503
36 W FTL (T8) IP 43
Supply & fix fluorescent light fitting slim
641 channel with bi-directional reflector 1 X 28 Each 2,165
W FTL (T5) IP 43
Supply & fix fluorescent light fitting slim
642 channel with bi-directional reflector 2 X 28 Each 2,821
W FTL (T5) IP 43
Supply & fix fluorescent light fitting slim
643 channel with bi-directional reflector 1 X Each 2,343
36/40 W FTL (T8) IP 43
Supply & fix fluorescent light fitting slim
644 channel with bi-directional reflector 2 X 36 Each 2,861
W FTL (T8) IP 43
Supply and fix dust/corrosion proof 1 X 28
645 Each 4,219
W FTL (T5) IP 65
646 . -- do -- but for 2 x 28 Watt Each 5,609
647 . -- do -- but for 1 x 36 Watt FTL (T8) Each 4,397
648 . -- do -- but for 2 x 36 Watt FTL (T8) Each 5,556
LED INDOOR LIGHTS
(Clause of escalation not to applied for LED lights)
Supply & fix LED tube light along with
649 Each 1,376
fixture,16 W
Supply & fix LED tube light along with
650 Each 1,376
fixture,18W

Page 44 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply & fix LED tube light along with


651 Each 1,376
fixture, 20 W
Supply & fix LED tube light along with
652 Each 1,857
fixture, 22 W
653 Supply & fix LED down lighter, 3 W Each 1,307

654 Supply & fix LED down lighter, 6 W Each 1,789

655 Supply & fix LED down lighter, 9 W Each 2,132

656 Supply & fix LED down lighter, 10 W Each 5,640

657 Supply & fix LED down lighter, 12 W Each 6,052

658 Supply & fix LED down lighter ,6 W Each 6,877

659 Supply & fix LED down lighter, 20 W Each 7,565

660 Supply & fix LED down lighter 2'x2' , 35 W Each 8,941

661 Supply & fix LED down lighter 2'x2', 40 W Each 11,416

662 Supply & fix LED High bay , 72 W Each 24,758

663 Supply & fix LED High bay , 110 W Each 30,259

664 Supply & fix LED High bay , 140 W Each 36,449

665 Supply & fix LED bulk head ,10 W Each 2,476
Supply & fix LED tube light 20W water
666 Each 6,864
proof IP 65
HIGH MAST LIGHT
Supply & installation of Galvanized steel high
mast lighting system of 12.5 meter in two
section, 3 mm section thickness, top dia 150
667 mm, bottom dia 340 mm, with 2/3 wire rope Each 5,42,684
system and its accessories. System is
suitable for loading 04 nos 50 to 100w LED
Lights

Page 45 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply & installation of Galvanized steel high


mast lighting system of 16 meter in two
section, 3 mm section thickness, top dia 150
668 mm, bottom dia 340 mm, with 2/3 wire rope Each 7,59,605
system and its accessories. System is
suitable for loading 08 nos 80 to 150w LED
lights

Galvanized steel high mast lighting system of


20 meter in two section, 3 mm section
thickness, top dia 150 mm, bottom dia 340
669 Each 15,70,981
mm, with 2/3 wire rope system and its
accessories. System is suitable for loading
06 nos 200 to 300w LED lights

Note: In HM light, cost of luminaires is to be added separately. Rates are inclusive


of cost of foundation
SHADOWLESS LIGHT FITTINGS
Supply and fix Shadow less light fitting
complete with emergency power unit &
battery back up for min 30 minutes (3 KVA),
having dome of 810 mm dia, fully counter
balanced moveable on ceiling trolley having
670 Each 4,98,031
a minimum longitudinal travel of 1350 mm
and axial rotation of 360 deg. The unit to be
suitable for operation on 230 V, single phase
50 cycles mains supply. (For Major OT
having lux level> 120,000)
-- do -- but for standard model suitable
671 Having battery back up of 1 KVA and lux Each 3,64,709
level >70,000
Supply and fix Shadow less light fitting
complete with emergency power unit &
battery back up for min 30 minutes (3 KVA),
having dome of 810 mm dia, fully counter
balanced and fixed on suspension rod,
672 Each 3,64,709
capable of having axial rotation of 360 deg.
The unit to be suitable for minor OT and
Capable for operation on 230 V single phase,
50 cycles mains supply having lux level >
70,000.
-- do -- but for mobile shadowless light
673 Each 3,19,864
fitting

Page 46 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

FLAME PROOF WEATHER PROOF LIGHT FITTINGS


Supply and fix Flame proof weather proof
674 Each 19,421
fluorescent fixture 1 x 40 W x 4'
Supply and fix Flame proof weather proof
675 Each 37,482
fluorescent fixture 2 x 40 W x 4'
Supply and fix Flame proof bulk head fitting
676 Each 9,135
200 W GLS/80 W HPMV/ 125 HPMV
Supply and fix Flame proof bulk head fitting
677 Each 10,202
2 x 26 W CFL
Supply and fix Flame proof bulk head fitting
678 Each 11,151
3 x 26 W CFL
Supply and fix Flame proof - weather proof
679 fitting suitable for 200 W GLS/ 80 W Each 11,910
HPMV/125 W HPMV
Supply and fix Flame proof - weather proof
680 flood light fitting suitable for 300 W GLS/ Each 25,398
250 W HPMV/ 150 W metal halide
Supply and fix Flame proof - weather proof
681 flood light fitting suitable for 500 W GLS/ Each 34,924
400 W HPMV/ 400 W metal halide
Supply and fix Flame proof - weather proof
682 switch socket & plug combined 16 A,250 Each 11,507
V(2P+Earth)
Supply and fix Flame proof - weather proof
683 switch socket & plug combined 16 A, 500 Each 12,653
V(3P+Earth)
Supply and fix Flame proof - weather proof
684 switch socket & plug combined 25 A, 250 Each 12,795
V(2P+Earth)
Supply and fix Flame proof - weather proof
685 switch socket & plug combined 25 A, 500 Each 13,887
V(3P+Earth)
Supply and fix Flame proof - weather proof
686 MCB socket & plug combined 16 A, 250 Each 27,398
V(2P+Earth)
Supply and fix Flame proof - weather proof
687 MCB socket & plug combined 16 A, 500 Each 28,547
V(3P+Earth)
Supply and fix FLP/WP switch/Isolator 10
688 Each 2,201
Amp single pole ON/OFF
Supply and fix FLP/WP switch/Isolator 10
689 Each 2,447
Amp double Pole ON/OFF

Page 47 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix FLP/WP switch/Isolator 16


690 Each 2,391
Amp single Pole ON/OFF
Supply and fix FLP/WP switch/Isolator 16
691 Each 2,613
Amp double Pole ON/OFF

DUST PROOF / DUST TIGHT /TOTALLY ENCLOSED TYPE TUBE LIGHT


FITTING AND ACCESSORIES

Supply and fix Fluorescent tube light 1 x 40


692 Each 2,591
Watt
Supply and fix Fluorescent tube light 2 x 40
693 Each 3,307
Watt
694 Supply and fix Junction box dia 100 x 65 H Each 789
695 Supply and fix Junction box dia 120 x 70H Each 880
696 Supply and fix Junction box dia 130 x 70H Each 1,678
PRESTRESSED CEMENT CONCRETE POLES
Supply and fix Prestressed concrete poles
of 9 meter long having 152 mm x 152 mm at
697 Each 7,754
top and 152 mm x 260 mm at bottom,
including foundation and coping.
Supply and fix Prestressed concrete poles
of 11 meter long having 102 mm x 172 mm
698 Each 10,147
at top and 102 mm x 289 mm at bottom
,including foundation and coping.
STEEL TUBULAR POLES
Supply and fix steel tubular swaged poles
type 410 SP-22 (8.5 meter long) complete
699 Each 17,470
with CI base plate and finial including
foundation and coping
-- do -- but type 410 SP-31 (9.0 meter
700 Each 19,153
long)
-- do -- but type 410 SP-37 (9.5 meter
701 Each 17,855
long)
-- do -- but type 410 SP-44 (10.0 meter
702 Each 19,240
long)
-- do -- but type 410 SP-55 (11.0 meter
703 Each 24,187
long)
-- do -- but type 410 SP-55 (12.0 meter
704 Each 29,180
long)
SWAN NECK TYPE (Single and double )

Page 48 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix steel tubular swaged poles


type 410SP-31(9.0 meter long) Swan Neck
705 Type complete with CI base plate and finial Each 17,850
and single swan neck, Including foundation
and coping .
706 --do-- but type 410 SP-44 (10.0 meter long) Each 19,852
707 --do-- but type 410 SP-44 (11.0 meter long) Each 22,806
Supply and fix steel tubular swaged poles
Type 410SP-31(9.0 meter long) Swan Neck
708 Type complete with CI base plate and finial Each 19,199
and double swan neck, Including foundation
and coping.
709 --do-- but type 410 SP-44 (10.0 meter long) Each 21,305
710 --do-- but type 410 SP-44 (11.0 meter long) Each 25,921
CRANES
Supply and fix Crane electrically operated
711 OH complete with span 9 to 11 meter, lift 4.5 Each 14,65,330
to 6 meter and of capacity 2 tons.
712 .-do- but of 3 ton capacity Each 16,46,566
713 .do- but of 5 ton capacity Each 21,25,734
714 .-do- but of 10 ton capacity Each 32,16,638
715 .-do- but of 20 ton capacity Each 48,23,634
Supply and fix Crane electrically operated
716 OH complete with span 12 to 16 meter, lift Each 17,18,404
4.5 to 6 meter and of capacity 2 tons.
717 .-do- but of 3 ton capacity Each 19,41,959
718 .-do- but of 5 ton capacity Each 24,78,471
719 .-do- but of 10 ton capacity Each 38,77,359
720 .-do- but of 20 ton capacity Each 55,91,213
Supply and fix crane hand operated OH
721 complete with span 9 to 11 meter, lift 4.5 to Each 7,73,398
6 meter and of capacity 1 tons.
722 .-do- but of 2 ton capacity Each 9,00,253
723 .-do- but of 3 ton capacity Each 10,71,543
724 .-do- but of 5 ton capacity Each 12,27,280
725 .-do- but of 10 ton capacity Each 17,24,646
Supply and fix crane hand operated OH
726 complete with span 12 to 16 meter, lift 4.5 to Each 9,75,265
6 meter of capacity 1 tons
727 .-do- but of 2 ton capacity Each 11,21,480
728 .-do- but of 3 ton capacity Each 13,54,981
729 .-do- but of 5 ton capacity Each 16,75,872
730 .-do- but of 10 ton capacity Each 20,51,674

Page 49 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

CRANE FLAME PROOF


Supply and fix flame proof crane electrically
731 operated OH complete with span 17 to 24 Each 35,09,723
meter and of capacity 5 tons
732 -do- but of 10 ton capacity Each 43,91,273
733 -do- but of 15 ton capacity Each 53,14,017
734 -do- but of 20 ton capacity Each 60,30,791
Supply and fix flame proof crane electrically
735 operated OH complete with span 25 to 30 Each 45,39,571
meter and of capacity 5 tons
736 -do- but of 10 ton capacity Each 54,62,315
737 -do- but of 15 ton capacity Each 66,32,223
738 -do- but of 20ton capacity Each 73,90,191
LIFT
Supply and fix Lift electrically operated
Microprocessor controlled complete with
power driven automatic stainless steel (SS)
739 sliding doors and having SS car enclosure, Each 31,00,469
suitable to carry 8 passengers (544 Kg) at a
speed of 1.0 M/sec to serve upto 6 floors
(G+5floors).
Extra cost for additional floor for 8
740 Each 1,71,185
passengers
Supply and fix Lift electrically operated
Microprocessor controlled complete with
power driven automatic stainless steel (SS)
741 sliding doors and having SS car enclosure, Each 33,08,790
suitable to carry 10 passengers (680 Kg) at a
speed of 1.0 M/sec to serve upto 6 floors
(G+5floors).
Extra cost for additional floor for 10
742 Each 1,71,185
passengers
Supply and fix Lift electrically operated
Microprocessor controlled complete with
power driven automatic stainless steel (SS)
743 sliding doors and having SS car enclosure, Each 37,25,218
suitable to carry 13 passengers (884 Kg) at a
speed of 1.5 M/sec to serve upto 6 floors
(G+5floors).
Extra cost for additional floor for 13
744 Each 1,85,045
passengers

Page 50 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix Lift electrically operated


Microprocessor controlled complete with
power driven automatic stainless steel (SS)
745 sliding doors and having SS car enclosure, Each 42,62,153
suitable to carry 16 passengers (1088 Kg) at
a speed of 1.5 M/sec to serve upto 6 floors
(G+5floors).
Extra cost for additional floor for 16
746 Each 1,85,891
passengers
Supply and fix Lift electrically operated
Microprocessor controlled complete with
power driven automatic stainless steel (SS)
747 sliding doors and having SS car enclosure, Each 49,63,184
suitable to carry 20 passengers (1360 Kg) at
a speed of 1.5 M/sec to serve upto 6 floors
(G+5floors).
Extra cost for additional floor for 20
748 Each 1,93,297
passengers
Automatic rescue device for lifts any
749 Each 2,56,883
capacity
Supply and fix Lift electrically operated
Microprocessor controlled complete with
power driven automatic stainless steel (SS)
sliding doors and having SS car enclosure
750 of size 1000x2400 mm, suitable for Hospital Each 41,64,923
stretcher , suitable to carry 15 passengers
(1020 Kg) at a speed of 0.5 M/sec to serve
upto 6 floors (G+5floors) including automatic
rescue device.
751 Extra cost for additional floor for hospital lifts Each 1,85,045
Supply and fix Lift electrically operated
Microprocessor controlled complete with
power driven automatic stainless steel (SS)
sliding doors and having SS car enclosure
752 of size 1000x2400 mm, suitable for Hospital Each 47,43,438
stretcher , suitable to carry 20 passengers
(1360 Kg) at a speed of 0.5 M/sec to serve
upto 6 floors (G+5floors) including automatic
rescue device.
753 Extra cost for additional floor for hospital lifts Each 1,93,297
LIGHTNING PROTECTION
Supply & fix single pointed air termination
754 Each 408
aluminium rod 12mm dia, 300 mm dong

Page 51 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply & fix aluminium strip 25mm x 3mm


755 complete with saddles and fixing screws for RM 204
fitting the strip.
Supply & fix copper strip 32mm x 6 mm
756 RM 1,041
buried in ground
Supply and fix G strip 32mm x 6mm buried
757 RM 294
in ground
EXCAVATION BY TRENCHLESS TECH

Boring of holes under road, pavement, hard


standing by trenchless technology using
758 ultra sounding technique and necessary RM 2,991
machine including HDPE pipe of 150 mm
dia suitable for 0.4 mpa working pressure.

SOLAR PV GENERATION
Grid connected ground top Solar PV
759 generation without battery MW 7,04,72,322

Components Cost(Lakh)
Module cost Rs 365.80
Degradation Rs 11.29
Civil and general wks Rs 60.00
Mounting structure Rs 50.00
Power Conditioning unit Rs 50.00
Cables and transformers Rs 60.00
Prelim & Op. Expenses Rs 69.00

Total Rs 666.09

Note: The rates for SPV generation are taken from CENTRAL ELECTRCITY
REGULATORY COMMISSION for the FY 2014-15 and service tax added. No
escalation will be applied on these rates, however, these rates will stand
updated as and when revised orders are issued by CERC.
760 Add 10% for single axis tracking
761 Add 20% for dual axis tracking
Ser No 762 - 1000 blank

Page 52 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

SECTION 2
EXTERNAL WATER SUPPLY
(Item No. 1001 TO 1472)

Page 53 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

SECTION - 2
EXTERNAL WATER SUPPLY
(Item No. 1001 TO 1472)
TUBE WELLS
For bore well having casing pipe for pump as 350 mm dia and other as 250
mm dia
Fixing cost for MS reducer, bail plug, well
1001 cap, MS strip for centering, MS iron clamps, Job 67,596
electric logging and sample strata box.
Trial bore of 250 mm dia upto 200meter
1002 depth below ground level in any kind of soil RM 1,820
strata including hard stone/boulder etc.
Trial bore of 250 mm dia exceeding
200meter depth below ground level and
1003 RM 2,384
upto 400 RM in any kind of soil strata
including hard stone/boulder etc.
Development of trial bore by reaming in
1004
following step:-
(a) From 250mm to 350 mm
(b) From 350mm to 450 mm
(c) From 450mm to 550 mm
(d) From 550mm to 650 mm
Reaming up to 675 mm for 60 RM from
(a) ground level including casing pipe of 350mm RM 11,396
dia and thickness 8mm and pea gravel.
Reaming up to 525 mm from depth
exceeding 60 meter to 200 meter including
(b) RM 6,861
casing pipe of 250mm dia and thickness
8mm and pea gravel.
Reaming up to 525 mm from depth
exceeding to 200 meter to 300 meter
(c) RM 8,522
including casing pipe of 250mm dia and
thickness 8mm and pea gravel.
Reaming up to 525 mm from depth
exceeding to 300 meter to 400 meter
(d) RM 9,822
including casing pipe of 250mm dia and
thickness 8mm and pea gravel.
Additional cost for slotted pipe of 250 mm
1005 RM 2,311
dia in lieu of casing pipe of 250 mm dia.

Page 54 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Development of tube well with compressed


1006 air and after with 25% extra capacity pump Per Hr 3,250
by pumping muddy water.
Yield test for the bore well by continuously
Each
1007 pumping for 16 hours to determine safe 51,997
job
pumping yield.
For bore well having casing pipe for pump as 200 mm dia
Fixing cost for MS reducer, bail plug, well
1008 cap, MS strip for centering, MS iron clamps, Job 61,241
electric logging and sample strata box.
Trial bore of 200 mm dia upto 200meter
depth below ground level in any kind of soil
1009 strata including hard stone/boulder including RM 1,618
electric logging, MS cap, MS flat iron
clamps, reducing socket etc.
Trial bore of 200 mm dia exceeding
200meter depth below ground level and
1010 RM 2,095
upto 400 RM in any kind of soil strata
including hard stone/boulder etc.
Development of trial bore by reaming in
1011
following step:-
(a) From 200mm to 350 mm
(b) From 350mm to 450 mm
(c) From 450mm to 550 mm
Reaming up to 525 mm for 60 RM from
(a) ground level including casing pipe of 200mm RM 11,266
dia and thickness 8mm and pea gravel.
Reaming up to 525 mm from depth
exceeding 60 metre to 200 meter including
(b) RM 6,861
casing pipe of 200mm dia and thickness
8mm and pea gravel.
Reaming up to 525 mm from depth
exceeding to 200 meter to 300 meter
(c) RM 8,522
including casing pipe of 200mm dia and
thickness 8mm and pea gravel.
Reaming up to 525 mm from depth
exceeding to 300 meter to 400 meter
(d) RM 9,822
including casing pipe of 200mm dia and
thickness 8mm and pea gravel.
Additional cost for slotted pipe of 200 mm
1012 RM 2,095
dia in lieu of casing pipe of 200 mm dia.

Page 55 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Development of tube well with compressed


1013 air and after with 25% extra capacity pump Per Hr 3,250
by pumping muddy water.
Yield test for the bore well by continuously
Each
1014 pumping for 16 hours to determine safe 51,997
job
pumping yield.

PUMPSET/ STARTER

Supply and Fix Star delta Starter fully automatic suitable for 415 V AC
1015 For 12.5 HP Motor Each 9,719
1016 For 15.0 HP Motor Each 9,745
1017 For 25.0 HP Motor Each 13,051
1018 For 30.0 HP Motor Each 17,162
1019 For 35.0 HP Motor Each 22,737
1020 For 50.0 HP Motor Each 32,778
1021 For 75.0 HP Motor Each 57,168
1022 For 90 HP Motor Each 73,620
1023 For 125.0 HP Motor Each 85,464
1024 For 250.0 HP Motor Each 1,51,230
1025 For 400.0 HP Motor Each 1,81,746
Supply and Fix Submersible Pump Starter
1026 For 6.0 HP Motor Each 10,461
1027 For 10.0 HP Motor Each 11,686
1028 For 15.0 HP Motor Each 13,715
1029 For 20.0 HP Motor Each 17,002
1030 For 30.0 HP Motor Each 27,047
1031 For 50.0 HP Motor Each 38,617
Supply and Fix DOL Starter
1032 For 2 HP Each 3,020
1033 For 7.5 HP Each 3,392
1034 For 10.0 HP Each 4,197
1035 For 15.0 HP Each 4,784
1036 For 20.0 HP Each 7,492
Supply and Fix MONOBLOCK PUMP SET
Monoblock pump set suitable for 415 V ,3
1037 Each 42,404
phase system having capacity 5 HP.
Monoblock pump set suitable for 415 V, 3
1038 Each 63,352
phase of capacity 10 HP.
Monoblock pump set suitable for 415 V, 3
1039 Each 70,289
phase system having capacity 12.5 HP.

Page 56 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Monoblock pump set suitable for 415 V, 3


1040 Each 74,378
phase system having capacity 15 HP.
CENTRIFUGAL PUMP SET
Pumping sets, centrifugal, electric driven,
1041 supply and Install complete up to 5 WHP WHP 17,706
inclusive of starter and PCC foundation.
1042 - do - but above 5 WHP upto 10 WHP WHP 15,010
1043 - do - but above 10 WHP upto 15 WHP WHP 14,621
1044 - do - but above 15 WHP upto 20 WHP WHP 13,399
1045 - do - but above 20 WHP upto 30 WHP WHP 11,903
1046 - do - but above 30 WHP upto 35 WHP WHP 11,481
IC ENGINE DRIVEN PUMPS
Pumping sets, centrifugal, IC engine driven,
1047 supply and Install complete up to 5 WHP WHP 54,329
inclusive of starter and PCC foundation.
1048 - do - but above 5 WHP upto 10 WHP WHP 32,291
1049 - do - but above 10 WHP upto 15 WHP WHP 18,918
1050 - do - but above 15 WHP upto 20 WHP WHP 16,978
1051 - do - but above 20 WHP upto 30 WHP WHP 14,047
Note :Item No 1037 -1046 Includes cost of automatic starter for pump above 10
WHP. For pump upto 10 WHP, cost of DOL starter has been included.
SUBMERSIBLE PUMPS
Submersible pump, electric driven 415 V,
TP suitable for 200/250 mm dia bore well (
1052 Casing pipe size 200/250 mm) supply and WHP 15,874
Install complete upto 5 WHP inclusive of 40
metre long submersible cable and starter.
1053 - do - but above 5 WHP upto 10 WHP WHP 12,328
1054 - do - but above 10 WHP upto 15 WHP WHP 9,264
1055 - do - but above 15 WHP upto 20 WHP WHP 8,607
1056 - do - but above 20 WHP upto 25 WHP WHP 8,432
1057 - do - but above 25 WHP WHP 7,285
Submersible pump, electric driven 415 V,
TP suitable for 250 mm dia bore well (
Casing pipe size 300/350 mm) supply and
1058 WHP 10,947
Install complete upto 10 WHP inclusive of
40 metre long submersible cable and
starter.
1059 - do - but above 10 WHP upto 15 WHP WHP 8,967
1060 - do - but above 15 WHP upto 25 WHP WHP 8,294
1061 - do - but above 25 WHP WHP 7,802
DISINFECTION,TREATMENT PLANTS

Page 57 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix direct cylinder mounted type


vacuum chlorinator for pressure feed
1062 including all gauges, pump, motor Each 1,70,325
conforming to IS 10553 part - 2 having
capacity 1.0 to 1000gm/hr.
Supply and fix direct cylinder mounted type
vacuum chlorinator for gravity feed including
1063 all gauges, pump, motor conforming to IS Each 1,56,153
10553 part - 2 having capacity 1.0 to
1000gm/hr.
Supply and fix pressure feed gaseous
chlorinator conforming to IS 10553 Part - 4
1064 Each 1,59,696
with pump, motor, gauges having capacity 1
to 1000gm/hr.
Supply and fix gravity feed gaseous
chlorinator conforming to IS 10553 Part-4
1065 Each 1,24,265
with pump, motor, gauges having capacity 1
to 1000 gm./hr.
Supply and fix bleaching dozer bucket type
1066 Each 39,373
of capacity 105 Litres.
Supply and fix bleaching dozer bucket type
1067 Each 48,656
of capacity 145 Litres.
Supply and fix bleaching dozer bucket type
1068 Each 27,894
of capacity 217 Litres.
Supply and Installation of Iron remover
plant complete with pressure filter, catalytic
1069 media, air compressor, back washing facility Each 10,31,679
including RCC foundation of capacity 5000
gallon/hr.
Supply and Installation of Iron remover plant
complete with pressure filter, catalytic
1070 media, air compressor, back washing facility Each 12,93,866
including RCC foundation of capacity 8000
gallon/hr.
Supply and Installation of Iron remover plant
complete with pressure filter, catalytic
1071 media, air compressor, back washing facility Each 16,16,286
including RCC foundation of capacity 10000
gallon/hr.
PIPES
CAST IRON PIPE CLASS 'B'

Page 58 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and lay Pipe cast Iron, S/S including


1072 RM 2,184
specials, Class"B", 80mm(3") dia
1073 - do - but 100 mm (4") dia RM 2,733
1074 - do - but 150 mm (6") dia RM 3,661
1075 - do - but 200 mm (8") dia RM 5,102
1076 - do - but 250 mm (10") dia RM 6,491
1077 - do - but 300 mm (12") dia RM 8,551
1078 - do - but 350 mm (14") dia RM 10,914
1079 - do - but 400 mm (16") dia RM 12,987
1080 - do - but 450 mm (18") dia RM 17,276
1081 - do - but 500 mm (20") dia RM 21,298
1082 - do - but 600 mm (27") dia RM 28,240
Supply and lay Pipe cast Iron both ends
1083 flanged and drilled, including specials ,Class RM 3,311
"B" ,80 mm (3") dia.
1084 - do - but 100 mm (4") dia RM 2,904
1085 - do - but 150 mm (6") dia RM 3,791
1086 - do - but 200 mm (8") dia RM 5,381
1087 - do - but 250 mm (10") dia RM 6,411
1088 - do - but 300 mm (12") dia RM 8,381
CAST IRON PIPE CLASS 'A'
Supply and lay pipe cast Iron, S/S including
1089 RM 1,986
specials, Class "A", 80 mm(3") dia.
1090 - do - but 100 mm (4") dia RM 2,519
1091 - do - but 150 mm (6") dia RM 3,465
1092 - do - but 200 mm (8") dia RM 4,604
1093 - do - but 250 mm (10") dia RM 6,029
1094 - do - but 300 mm (12") dia RM 7,642
1095 - do - but 350 mm (14") dia RM 9,199
1096 - do - but 400 mm (16") dia RM 11,960
1097 - do - but 450 mm (18") dia RM 15,317
1098 - do - but 500 mm (20") dia RM 18,705
1099 - do - but 600 mm (27") dia RM 19,542
CAST IRON PIPE CLASS LA
Supply and lay pipe cast Iron, S/S including
1100 RM 1,757
specials, Class LA, 80 mm (3)dia
1101 - do - but 100 mm (4") dia RM 1,701
1102 - do - but 150 mm (6") dia RM 2,436
1103 - do - but 200 mm (8") dia RM 3,568
1104 - do - but 250 mm (10") dia RM 4,547
1105 - do - but 300 mm (12") dia RM 5,855

Page 59 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

1106 - do - but 350 mm (14") dia RM 7,240


1107 - do - but 400 mm (16") dia RM 9,327
1108 - do - but 450 mm (18") dia RM 11,257
1109 - do - but 500 mm (20") dia RM 13,851
1110 - do - but 600 mm (27") dia RM 16,912
DUCTILE IRON PIPE
CLASS K-9
Supply and lay pipe ductile Iron , S/S
1111 including specials, Class K-9 ,100 mm (4) RM 1,592
dia
1112 - do - but 150 mm (6") dia RM 2,151
1113 - do - but 200 mm (8") dia RM 2,814
1114 - do - but 250 mm (10") dia RM 4,430
1115 - do - but 300 mm (12") dia RM 4,807
1116 - do - but 350 mm (14") dia RM 5,762
1117 - do - but 400 mm (16") dia RM 7,026
1118 - do - but 450 mm (18") dia RM 8,346
1119 - do - but 500 mm (20") dia RM 9,990
1120 - do - but 600 mm (27") dia RM 12,591
CLASS K 7
Supply and lay pipe ductile Iron , S/S
1121 including specials, Class K-7 ,100 mm (4) RM 1,392
dia
1122 - do - but 150 mm (6") dia RM 1,958
1123 - do - but 200 mm (8") dia RM 2,488
1124 - do - but 250 mm (10") dia RM 3,371
1125 - do - but 300 mm (12") dia RM 4,347
1126 - do - but 350 mm (14") dia RM 5,133
1127 - do - but 400 mm (16") dia RM 6,040
1128 - do - but 450 mm (18") dia RM 7,276
1129 - do - but 500 mm (20") dia RM 8,553
1130 - do - but 600 mm (27") dia RM 11,106
Note : Item No 1072 - 1130 Rate include cost of laying, excavation, jointing etc.
GI PIPES MEDIUM CLASS
Supply and lay pipe galvanized, Medium
1131 RM 231
class, including fittings 15 mm (1/2) dia.
1132 -- do -- but 20 mm (3/4) dia RM 263
1133 .-- do -- but 25 mm (1.0) dia RM 300
1134 -- do -- but 40 mm (1.5) dia RM 404
1135 -- do -- but 50 mm (2) dia RM 505
1136 -- do -- but 63 mm (2) dia RM 726

Page 60 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

1137 -- do -- but 80 mm (3) dia RM 815


1138 -- do -- but 100 mm (4) dia RM 1,180
1139 -- do -- but 150 mm (6) dia RM 2,384
1140 -- do -- but 200 mm (8) dia RM 2,704
GI PIPES HEAVY CLASS
Supply and lay pipe galvanized, Heavy
1141 RM 289
class, including fittings, 15 mm (1/2) dia.
1142 -- do -- but 20 mm (1) dia RM 341
1143 -- do -- but 25 mm (1) dia RM 452
1144 . --do-- but 40 mm (1) dia RM 591
1145 -- do-- but 50 mm (2) dia RM 781
1146 -- do-- but 63 mm (2) dia RM 1,050
1147 -- do-- but 80 mm (3) dia RM 1,237
1148 -- do-- but 100 mm (4) dia RM 1,739
1149 -- do-- but 150 mm (6) dia RM 2,596
Note : Item No 1131 - 1149 Rate include cost of laying, excavation, jointing etc.
M S PIPE (ERW)
Supply and fix Pipe ERW Steel including
1150 specials, nominal dia 150 mm as per IS RM 1,918
3589 (1981) thickness 4.8 mm
1151 -- do -- but 200 mm dia RM 2,249
1152 -- do -- but 250 mm dia RM 2,770
1153 -- do -- but 300 mm dia RM 3,209
Supply and lay Pipes ERW Steel including
1154 specials, nominal dia 150 mm, as per IS RM 2,032
3589 (1981) thickness 5.4 mm
1155 -- do -- but 200 mm dia RM 2,350
1156 -- do -- but 250 mm dia RM 2,935
1157 -- do -- but 300 mm dia RM 3,410
Supply and lay Pipes ERW Steel including
1158 specials, nominal dia 150 mm as per IS RM 2,133
3589 (1981) thickness 6.0 mm
1159 -- do -- but 200 mm dia RM 3,816
1160 -- do -- but 250 mm dia RM 3,417
1161 -- do -- but 300 mm dia RM 3,960
Note :Item No 1150-1161 Cost of ERW pipe does not include cost of excavation
PVC ( UPVC) PIPE CONFORMING TO IS: 13592 FOR SOIL AND WASTE
WATER DISCHARGE AND RAIN WATER SYSTEM
Supply and lay Pipe PVC class A
1162 conforming to IS 13592 including special, RM 192
OD 75 mm dia.

Page 61 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

1163 - do - but 110 mm dia. RM 282


1164 -- do -- but 160 mm dia RM 787
Supply and lay Pipe PVC class B including
1165 RM 269
Special, OD 75 mm dia
1166 - do - but 110 mm dia. RM 436
1167 -- do -- but 160 mm dia RM 874
Note :Item No 1162-1167 Cost of PVC does not include cost of excavation
PP-R PIPE
Supply and lay 3 layer ( inner antimicrobial,
outer UV stabilized) ISI marked ,IS-15801,
PP-R pipes SDR 11 (PN-10) and PP-R
1168 RM 271
plain fittings in trenches/walls/cellings or
laying in floors complete of size outer dia 25
mm including all fittings
1169 - do - but outer dia 32 mm RM 334
1170 - do - but outer dia 40 mm RM 423
1171 - do - but outer dia 50 mm RM 561
1172 - do - but outer dia 63 mm RM 809
1173 - do - but outer dia 75 mm RM 1,089
1174 - do - but outer dia 90 mm RM 1,489
1175 - do - but outer dia 110 mm RM 2,056
1176 - do - but outer dia 160 mm RM 4,155
Supply and lay 3 layer ( inner antimicrobial,
outer UV stabilized) ISI marked,IS-15801,
PP-R pipes SDR 7.4 (PN-16) and PP-R
1177 RM 173
plain fittings in trenches/walls/cellings or
laying in floors complete of size outer dia 16
mm ,including fittings
1178 - do - but outer dia 20 mm RM 206
1179 - do - but outer dia 25 mm RM 265
1180 - do - but outer dia 32 mm RM 357
1181 - do - but outer dia 40 mm RM 520
1182 - do - but outer dia 50 mm RM 717
1183 - do - but outer dia 63 mm RM 1,092
1184 - do - but outer dia 75 mm RM 1,493
1185 - do - but outer dia 90 mm RM 2,073
1186 - do - but outer dia 110 mm RM 2,885
1187 - do - but outer dia 160 mm RM 5,763

Page 62 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and lay 3 layer ( inner antimicrobial,


outer UV stabilized) ISI marked, IS-15801,
PP-R pipes SDR 6 (PN-20) and PP-R plain
1188 RM 217
fittings in trenches/walls/cellings or laying in
floors complete of size outer dia 16 mm,
including fittings
1189 - do - but outer dia 20 mm RM 251
1190 - do - but outer dia 25 mm RM 318
1191 - do - but outer dia 32 mm RM 422
1192 - do - but outer dia 40 mm RM 625
1193 - do - but outer dia 50 mm RM 854
1194 - do - but outer dia 63 mm RM 1,240
1195 - do - but outer dia 75 mm RM 1,717
1196 - do - but outer dia 90 mm RM 2,412
1197 - do - but outer dia 110 mm RM 3,336
1198 - do - but outer dia 160 mm RM 6,755
Supply and lay 3 layer ( inner antimicrobial,
outer UV stabilized) ISI marked, IS-15801,
PP-R pipes SDR 13.5 (PN-8) and PP-R
1199 RM 1,326
plain fittings in trenches/walls/cellings or
laying in floors complete of size outer dia 90
mm ,including fittings
1200 - do - but outer dia 110 mm RM 1,818
1201 - do - but outer dia 160 mm RM 3,538
Supply and lay 3 layer ( inner antimicrobial,
outer UV stabilized) ISI marked,IS-15801
,PP-R pipes SDR 7.4 (PN-16) and PP-R
1202 RM 317
plain plain and brass threaded fittings laid in
concealed work complete of size outer dia
16 mm
1203 - do - but outer dia 20 mm RM 346
1204 - do - but outer dia 25 mm RM 413
1205 - do - but outer dia 32 mm RM 529
Supply and lay 3 layer ( inner antimicrobial,
outer UV stabilized) ISI marked, IS-15801,
PP-R pipes SDR 6 (PN-20) and PP-R plain
1206 RM 388
and brass threaded fittings laid in concealed
work complete of size outer dia 16 mm,
including fittings
1207 - do - but outer dia 20 mm RM 423
1208 - do - but outer dia 25 mm RM 498
1209 - do - but outer dia 32 mm RM 638

Page 63 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Note : PP-R pipe rate does not include the cost of excavation etc
PP-R GATE VALVE
Supply and fix PPR Gate Valves (Brass
1210 Each 1,048
Insert) of 20 mm bore.
1211 - do - but outer dia 25 mm Each 1,177
1212 - do - but outer dia 32 mm Each 1,410
1213 - do - but outer dia 40 mm Each 1,930
1214 - do - but outer dia 50 mm Each 2,542
1215 - do - but outer dia 63 mm Each 2,947
1216 - do - but outer dia 75 mm Each 4,578
1217 - do - but outer dia 90 mm Each 6,654
1218 - do - but outer dia 110 mm Each 9,783
PP-R BALL VALVES
Supply and fix PPR Ball Valves (Brass
1219 Each 678
Insert) of 20 mm bore.
1220 - do - but outer dia 25 mm Each 793
1221 - do - but outer dia 32 mm Each 1,006
1222 - do - but outer dia 40 mm Each 1,203
1223 - do - but outer dia 50 mm Each 1,728
1224 - do - but outer dia 63 mm Each 2,139
1225 - do - but outer dia 75 mm Each 2,412
1226 - do - but outer dia 90 mm Each 3,396
1227 - do - but outer dia 110 mm Each 3,672
VALVES
SLUICE VALVES CLASS PN 1.0
Supply and fix Valves, Sluice, flanged of
1228 Each 7,164
class 1.0 PN,50 mm (2)dia
1229 -- do -- but 65 mm (2) dia Each 7,777
1230 -- do -- but 80 mm (3) dia Each 8,968
1231 -- do -- but 100 mm (4) dia Each 11,671
1232 -- do -- but 150 mm (6) dia Each 17,252
1233 -- do -- but 200 mm (8) dia Each 29,304
1234 -- do -- but 250 mm 106) dia Each 42,055
1235 -- do -- but 300 mm (12) dia Each 52,854
1236 -- do -- but 350 mm (14) dia Each 79,748
1237 -- do -- but 400 mm (16) dia Each 99,572
1238 -- do -- but 450 mm (18) dia Each 1,22,586
1239 -- do -- but 500 mm (20) dia Each 1,66,470
1240 -- do -- but 600 mm (24) dia Each 2,12,228
SLUICE VALVES CLASS PN 1.6

Page 64 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix Valves, Sluice, flanged of


1241 Each 8,088
class 1.6 PN ,50 mm (2)dia.
1242 -- do -- but 65 mm (2) dia Each 9,242
1243 -- do -- but 80 mm (3) dia Each 10,629
1244 -- do -- but 100 mm (4) dia Each 13,971
1245 -- do -- but 150 mm (6) dia Each 20,622
1246 -- do -- but 200 mm (8) dia Each 35,126
1247 -- do -- but 250 mm 106) dia Each 50,508
1248 -- do -- but 300 mm (12) dia Each 64,511
1249 -- do -- but 350 mm (14) dia Each 95,271
1250 -- do -- but 400 mm (16) dia Each 1,10,151
1251 -- do -- but 450 mm (18) dia Each 1,28,745
1252 -- do -- but 500 mm (20) dia Each 2,32,511
1253 -- do -- but 600 mm (24) dia Each 2,92,838
REFLEX VALVES
Supply and fix Valve, reflux, with by-pass
1254 Each 7,610
Arrangement, 50 mm (2) dia
1255 -- do -- but 65 mm (2.5) dia Each 8,330
1256 -- do -- but 80 mm (3) dia Each 9,119
1257 -- do -- but 100 mm (4) dia Each 11,501
1258 -- do -- but 150 mm (6) dia Each 17,540
1259 -- do -- but 200 mm (8) dia Each 28,309
1260 -- do -- but 250 mm (10) dia Each 50,225
1261 -- do -- but 300 mm (12) dia Each 60,233
1262 -- do -- but 350 mm (14) dia Each 99,021
1263 -- do -- but 400 mm (16) dia Each 1,23,589
1264 -- do -- but 450 mm (18) dia Each 1,69,574
1265 -- do -- but 500 mm (20) dia Each 2,69,559
1266 -- do -- but 600 mm (24) dia Each 3,38,778
BUTTERFLY VALVES
Supply and fix Valve, butterfly conforming to
1267 Each 4,490
IS 13095,50 mm (2) dia.
1268 -- do -- but 65 mm (2.5) dia Each 5,015
1269 -- do -- but 80 mm (3) dia Each 5,621
1270 -- do -- but 100 mm (4) dia Each 6,681
1271 -- do -- but 150 mm (6) dia Each 9,894
1272 -- do -- but 200 mm (8) dia Each 15,604
1273 -- do -- but 250 mm (10) dia Each 24,049
1274 -- do -- but 300 mm (12) dia Each 32,784
1275 -- do -- but 350 mm (14) dia Each 47,763
1276 -- do -- but 400 mm (16) dia Each 58,173

Page 65 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

1277 -- do -- but 450 mm (18) dia Each 69,401


1278 -- do -- but 500 mm (20) dia Each 1,07,846
1279 -- do -- but 600 mm (24) dia Each 1,34,797
FOOT VALVES
Supply and fix Foot Valve conforming to IS
1280 Each 4,108
4038, 50 mm (2) dia.
1281 -- do -- but 65 mm (2.5) dia Each 4,728
1282 -- do -- but 80 mm (3) dia Each 5,697
1283 -- do -- but 100 mm (4) dia Each 7,548
1284 -- do -- but 150 mm (6) dia Each 11,672
1285 -- do -- but 200 mm (8) dia Each 22,087
1286 -- do -- but 250 mm (10) dia Each 31,483
1287 -- do -- but 300 mm (12) dia Each 42,288
1288 -- do -- but 350 mm (14) dia Each 69,567
1289 -- do -- but 400 mm (16) dia Each 88,413
STRAINER
Supply and fix Strainer Y type conforming to
1290 Each 5,110
IS, size50 mm (2) dia.
1291 -- do -- but 65 mm (2.5) dia Each 7,043
1292 -- do -- but 80 mm (3) dia Each 9,147
1293 -- do -- but 100 mm (4) dia Each 12,654
1294 -- do -- but 150 mm (6) dia Each 17,152
1295 -- do -- but 200 mm (8) dia Each 29,465
1296 -- do -- but 250 mm (10) dia Each 42,477
1297 -- do -- but 300 mm (12) dia Each 63,513
1298 -- do -- but 350 mm (14) dia Each 67,349
1299 -- do -- but 400 mm (16) dia Each 84,094
AIR RELEASE VALVE
Supply and fix Cast Iron Air Valves with
single air Outlets, conforming to IS 14845 of
1300 Each 8,505
size 50 mm dia bore and fixing up in Cast
Iron Water supply mains of size 50 mm dia.
Cast Iron Air Valves with two air Outlets, 50
1301 mm dia bore and fixing Up in cast iron water Each 7,898
supply mains
1302 -- do -- but 80 mm dia bore Each 9,487
1303 -- do -- but 100 mm dia bore Each 11,891
1304 -- do -- but 150 mm dia bore Each 25,941
1305 -- do -- but 200 mm dia bore Each 50,541
GLOBE VALVE

Page 66 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix Valve, globe conforming to IS


1306 Each 5,862
9338,50mm (2) dia pipe
1307 -- do -- but 65 mm (2.5) dia Each 8,716
1308 -- do -- but 80 mm (3) dia Each 11,127
1309 -- do -- but 100 mm (4) dia Each 18,780
1310 -- do -- but 150 mm (6) dia Each 31,419
1311 -- do -- but 200 mm (8) dia Each 55,309
1312 -- do -- but 250 mm (10) dia Each 86,113
1313 -- do -- but 300 mm (12) dia Each 1,14,761
STOP COCK, BIB COCK
Supply and fix Valve, stop, screwed,15 mm
1314 Each 728
(1/2) dia pipe
1315 -- do -- but 20 mm (3/4) dia pipe Each 946
1316 -- do-- but 25 mm (1) dia pipe Each 1,431
1317 -- do-- but 40 mm (1.5) dia pipe Each 2,825
1318 -- do-- but 50 mm (2) dia pipe Each 4,336
Supply and fix Cock, bib, brass, screwed
1319 Each 450
down For size 15 mm (1/2) dia pipe
1320 -- do-- but 20 mm (3/4) dia pipe Each 466
1321 -- do-- but 25 mm (1) dia pipe Each 517
Supply and fix Cock, bib, brass chromium
1322 plated, screwed down For size 15 mm (1/2) Each 896
dia pipe
Supply and fix Cock, pillar, brass chromium
1323 plated, screwed down for size 15 mm (1/2) Each 915
dia pipe
Supply and fix Cock, stop, brass chromium
1324 plated, screwed down for size 15 mm (1/2) Each 806
dia pipe
Supply and fix Cock, bib, brass chromium
1325 plated, screwed down For size 20 mm (3/4) Each 873
dia pipe
HOT WATER APPARATUS
Supply and fix Water heater storage type,
1326 Each 15,003
electric,capacity 25 litres.BEE 5 star rated
Supply and fix Water heater storage type,
1327 Each 15,456
electric, capacity 35 litres
1328 -- do-- but of capacity 50 litres Each 19,314
1329 -- do-- but of capacity 70 litres Each 27,603
1330 -- do-- but of capacity 100 litres Each 42,546

Page 67 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and Installation of Solar water


heating system ,Flat plate collector type
1331 Each 48,552
,with heat exchanger of 100 litre per day
capacity ,with electrical heating back up

Supply and Installation of Solar water


heating system ,Flat plate collector type
1332 Each 88,887
,with heat exchanger of 200 litre per day
capacity ,with electrical heating back up

Supply and Installation of Solar water


heating system ,Flat plate collector type
1333 Each 1,39,120
,with heat exchanger of 300 litre per day
capacity ,with electrical heating back up
Supply and Installation of Solar water
heating system ,Flat plate collector type
1334 Each 2,14,748
,with heat exchanger of 500 litre per day
capacity ,with electrical heating back up
Supply and Installation of Solar water
heating system ,Flat plate collector type
1335 Each 4,38,832
,with heat exchanger of 1000 litre per day
capacity ,with electrical heating back up
Supply and Installation of Solar water
heating system ,Flat plate collector type
1336 Each 6,46,111
,with heat exchanger of 1500 litre per day
capacity ,with electrical heating back up
Supply and Installation of Solar water
heating system ,Flat plate collector type
1337 Each 8,53,389
,with heat exchanger 2000 litre per day
capacity ,with electrical heating back up
Note: Item No 1331-1337 Solar water heater rates include the cost of civil
wks,cold and hot water tanks,cold and hot water pipe lines,insulation,electical
cabling etc.In case if the length of insulated hot water pipe is more than
1RM/10Ltr cap in that case cost for additional length of insulated pipe to be
estimated and included.

FIRE FIGHTING
Supply & fix fire hydrant landing valve type
1338 A (single head outlet) of 63 mm dia Each 12,077
conforming to IS 5290
1339 - do - but type B ( double head outlet) Each 23,563

Page 68 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix hose box for keeping 2 Nos


hose pipe of length 15 meter each, branch
1340 Each 5,344
pipe.nozzle, coupling etc of MS sheet of
Thickness 2.0 mm

Supply and fix 63 mm dia gun metal branch


1341 pipe with 12.5 mm nozzle conforming to IS Each 4,306
903
Supply and fix hose box for hose reel of 20
mm size of 30 meter length complete with
1342 Each 7,629
coupling branch pipe and nozzle , MS sheet
2 mm thickness
Supply and fix hose reel of 20 mm dia and
1343 Each 15,717
30 meter length conforming to IS 5132
Supply and fix branch pipe with nozzle of 20
1344 Each 1,402
mm dia for hose reel conforming to IS 8090
Supply and fix 63 mm dia 15 meter long
hose conforming to IS 636 complete with
1345 Each 6,398
male and female coupling conforming to IS
903
Supply and fix fire hydrant stand post with
1346 Each 3,767
provn of single outlet conforming to IS 908
Supply and fix electric motor siren
conforming to IS 1941 suitable for three
Each
1347 phase 415 V supply with motor not 12,714
set
exceeding 3.75 KW power and able to
deliver 143 DB noise level.
Supply and Install Electric Driven Jockey
1348 pump delivering 180 LPM up to 70 Meter Each 2,38,796
head
Supply and Install Electric Driven Jockey
1349 pump delivering 180 LPM above 70 meter Each 2,80,519
head up to 90 meter head
Supply and Install Booster pump up to 30
1350 Each 1,21,092
meter head discharge 450 LPM
1351 .--do-- but 900 LPM Each 1,22,484
Supply and Install Booster pump 36 meter
1352 Each 1,44,948
head discharge 450 LPM
Supply and Install Booster pump 36 meter
1353 Each 1,44,948
head discharge 900 LPM

Page 69 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and Install Diesel Engine driven fire


pump horizontal end suction , centrifugal
1354 type,CI casing and bronze impeller stainless Each 9,09,619
steel shaft, suitable for delivering 1620
LPM, 70 meter head ,1800RPM
1355 .--do-- but 90 M head,but 2150RPM Each 8,10,687
Supply and Install Diesel Engine driven fire
pump horizontal end suction , centrifugal
1356 type,CI casing and bronze impeller stainless Each 9,09,619
steel shaft, suitable for delivering 2280 LPM,
70 meter head,1800RPM
1357 .--do-- but 90 M head,1800RPM Each 9,09,619
Supply and install Diesel Engine driven fire
pump horizontal end suction , centrifugal
1358 type,CI casing and bronze impeller stainless Each 9,09,619
steel shaft,suitable for delivering 2640 LPM,
70 meter head,1800 RPM
1359 .--do-- but 90 M head,1800 RPM Each 10,14,489
Supply and Install Diesel Engine driven fire
pump horizontal end suction , centrifugal
1360 type,CI casing and bronze impeller stainless Each 9,09,619
steel shaft suitable for delivering 2850 LPM,
70 meter head,1800 RPM
1361 .--do-- but 90 M head Each 10,14,489
Supply and Install Diesel Engine driven fire
pump horizontal end suction , centrifugal
1362 type,CI casing and bronze impeller stainless Each 10,68,982
steel shaft, suitable for delivering 4560 LPM,
70 meter head,2300 RPM
1363 .--do-- but 90 M head,2300 RPM Each 10,94,039
Supply and Install Electric driven fire pump
horizontal end suction , centrifugal type,CI
1364 casing and bronze impeller stainless steel Each 3,03,036
shaft, suitable for delivering 1620 LPM, 70
meter head,2900 RPM
1365 .--do-- but 90 M head,2900 RPM Each 3,40,033
Supply and Install Electric driven fire pump
horizontal end suction , centrifugal type,CI
1366 casing and bronze impeller stainless steel Each 4,16,971
shaft, suitable for delivering 2280 LPM, 70
meter head,2900 RPM
1367 .--do-- but 90 M head,2900 RPM Each 4,84,989

Page 70 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and Install Electric driven fire pump


horizontal end suction , centrifugal type,CI
1368 casing and bronze impeller stainless steel Each 4,16,971
shaft, suitable for delivering 2640 LPM, 70
meter head,2900 RPM
1369 .--do-- but 90 M head,2900 RPM Each 4,84,989
Supply and Install Electric driven fire pump
horizontal end suction , centrifugal type,CI
1370 casing and bronze impeller stainless steel Each 4,16,971
shaft,suitable for delivering 2850 LPM, 70
meter head,2900 RPM
1371 .--do-- but 90 M head,2900 RPM Each 4,84,989
Supply and Install Electric driven fire pump
horizontal end suction , centrifugal type,CI
1372 casing and bronze impeller stainless steel Each 11,44,172
shaft, suitable for delivering 4560 LPM, 70
meter head ,1480 RPM
1373 .--do-- but 90 M head, 2900 RPM Each 10,03,440
Supply and fix MS flanged pipe 25mm NB
heavy duty for multi storied building duly
1374 RM 477
painted with 2 coats of synthetic enamel
paint over coat of zinc chromate primer
Supply and fix MS flanged pipe 32mm NB
heavy duty for multi storied building duly
1375 RM 604
painted with 2 coats of synthetic enamel
paint over coat of zinc chromate primer
Supply and fix MS flanged pipe 40mm NB
heavy duty for multi storied building duly
1376 RM 656
painted with 2 coats of synthetic enamel
paint over coat of zinc chromate primer
Supply and fix MS flanged pipe 50mm NB
heavy duty for multi storied building duly
1377 RM 910
painted with 2 coats of synthetic enamel
paint over coat of zinc chromate primer
Supply and fix MS flanged pipe 65mm NB
heavy duty for multi storied building duly
1378 RM 1,122
painted with 2 coats of synthetic enamel
paint over coat of zinc chromate primer
Supply and fix MS flanged pipe 80mm NB
heavy duty for multi storied building duly
1379 RM 1,418
painted with 2 coats of synthetic enamel
paint over coat of zinc chromate primer

Page 71 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix MS flanged pipe 100mm NB


heavy duty for multi storied building duly
1380 RM 2,032
painted with 2 coats of synthetic enamel
paint over coat of zinc chromate primer
Supply and fix MS flanged pipe 150mm NB
heavy duty for multi storied building duly
1381 RM 2,855
painted with 2 coats of synthetic enamel
paint over coat of zinc chromate primer
Supply and fix MS flanged pipe 200mm NB
heavy duty for multi storied building duly
1382 RM 3,343
painted with 2 coats of synthetic enamel
paint over coat of zinc chromate primer
Supply and fix 80mm bore hand operated
1383 butterfly valve of pressure not less than 15 Each 6,370
Kg / Sqcm with complete set
Supply and fix 100mm bore hand operated
1384 butterfly valve of pressure not less than 15 Each 8,295
Kg / Sqcm with complete set
Supply and fix 150mm bore hand operated
1385 butterfly valve of pressure not less than 15 Each 11,109
Kg / Sqcm with complete set
Supply and fix 200mm bore hand operated
1386 butterfly valve of pressure not less than 15 Each 20,907
Kg / Sqcm with complete set
Supply and fix Dual plates CI wafer type
1387 check valve, 80 mm bore tested to pressure Each 7,406
of 15Kg/ Sqcm complete set
Supply and fix Dual plates CI wafer type
1388 check valve, 150 mm bore tested to Each 13,331
pressure of 15Kg/ Sqcm complete set
Supply and fix Pressure gauge 100 mm dia
1389 Each 1,334
with ball valve of pressure 25 Kg/Sqcm
Supply and fix Gun metal fire brigade in let
connection for connecting to external fire
hydrant ring main consisting of two nos
1390 Each 12,696
63mm dia instantaneous type male coupling
with built in check valves and 150mm dia,
flanged outlet complete with all accessories.

Page 72 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix Gun metal fire brigade inlet


connection (suction collecting head)
consisting of four nos 63mm dia
1391 instantaneous type male coupling with built Each 10,157
in check valves and 150mm dia sluice valve
(one no 150mm dia NRV), and 150mm dia
flanged outlet complete with all accessories.
Supply and fix MS cabinet (approx 750mm x
600mm x 450mm) to encl fire brigade inlet
connections fabricated from 16 gauge sheet
1392 Each 12,696
with full front glass door and locking
arrangement painted and mounted on
masonry platform complete
Supply and fix Air cushioning tank (Air
vessel) 250mm dia x 1000mm high with
dished top, made of minimum 6mm thick MS
1393 pipe /plate complete with 20mm dia. Brass Each 13,585
air valve (ball type), 20mm dia stop valve,
pressure gauge with brass stop cock, nipple
tees elbows and all accessories complete
Supply and fix Automatic air release valve
1394 50mm dia suitable for domestic water with Each 12,696
50mm gun metal stop valve complete
Supply and fix Mild Steel class 'C' diesel
pump exhaust pipe 150mm dia with one
1395 layer of10mm thick asbestos rope insulation RM 2,286
and including all fitting clamp/ structural
steel supports complete
Supply and fix Bulb type gun metal sprinkler
1396 head pendent type set to operate at 68 Each 494
degree C
1397 .--do--upright type Each 456
1398 .--do--but side wall type Each 637
1399 .--do--but concealed type Each 1,899
Supply and fix Bulb type gun metal sprinkler
1400 head, pendent type, set to operate at 79 Each 488
degree C
1401 .--do--upright type Each 488
1402 .--do--but side wall type Each 738
1403 .--do--but concealed type Each 2,255

Page 73 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix Sprinkler quick/early


1404 response type , pendent type, set to Each 1,232
operate at 68 degree C
1405 .--do--upright type Each 1,292
Supply and fix Sprinkler quick /early
1406 response type , pendent type, set to Each 1,232
operate at 79 degree C
1407 .--do--but concealed type Each 1,292
Supply and fix Fire alarm control panel
complying with BS EN 54 Single loop panel Each
1408 1,31,346
of capacity from 99 detectors & 99 modules set
upto 200 detector
-ditto - but 2 loop panel with 99 detectors &
Each
1409 99 modules & upto 200 detectors and 1,55,466
set
modules per loop
-ditto - but 4 loop panel with 99 detectors &
Each
1410 99 modules & upto 200 detectors and 2,82,319
set
modules per loop
-ditto - but 5 loop panel with 99 detectors &
Each
1411 99 modules & upto 200 detectors and 8,19,209
set
modules per loop
Supply and fix Detectors Complying with
and type certified to EN-45 Addressable
1412 type smoke detector Photoelectric / Optical Each 5,378
with base with self built intelligence as per
IS: 11360
ditto but Addressable type multisensor
1413 Each 6,129
detector with heat and smoke combination
.--do-- but Addressable type heat detector
1414 with base with rate of rise cum fixed Each 5,378
temperature as per IS: 2175
ditto but Addressable type duct detector
1415 housing with sampling tube add up cost of Each 13,046
smoke detector
ditto but Addressable type Flame detectors
with UV/IR detection Capacity (add up cost
1416 Each 1,53,565
of module to be a complete set, the type of
module shall be relay type module)
BEAM MASTER DETECTOR
Supply and fix Beam Master detector with
1417 Transmitter and receiver (Add power supply Each 99,165
unit & module)

Page 74 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix Beam Master Detector,


1418 Transceiver Type (Add power supply unit & Each 1,02,381
module)
ANNUCIATING DEVICES
Supply and install Addressable control
1419 Each 7,264
module
1420 Supply and fix Addressable monitor module Each 7,264
Supply and fix Addressable manual call
1421 Each 6,835
point resettable type
Supply and fix Addressable electronic
1422 Each 9,301
sounder cum strobe
1423 Supply and fix Addressable sounder Each 7,264
Supply and fix Loop powered sounder
1424 Each 8,335
strobe
1425 Supply and fix Short circuit isolators Each 3,726
Supply and fix Explosive proof manual call
1426 Each 11,123
point (Add up control module)
1427 Supply and fix Remote response indicators Each 199
1428 Supply and fix 6 Watt ceiling Speaker Each 1,573
1429 Supply and fix 4 Watt ceiling Speaker Each 1,545
PA SYSTEM
Supply and fix 6 Watt wall mount CD
1430 Each 3,039
Speaker
Supply and fix 10 Watt wall mount CD
1431 Each 3,726
Speaker
1432 Supply and fix 100 Watt amplifier Each 43,207
1433 Supply and fix 250 Watt Amplifier Each 66,381
1434 Supply and fix 500 Watt Amplifier Each 83,980
1435 Supply and fix Microphone set Each 7,505
1436 Supply and fix Control Console Each 50,395
Supply and fix Fire Alarm sounders / Sirens
electronic type horizontal single stage
continuous normal operation for at least 50
1437 Each 11,249
minutes with sound level 65 DB to 120 DB
measured at 1.5 meter with sound output
variation of + 5 DB for 500 meter range
1438 ditto but 1000 m range Each 11,416
1439 ditto but 1500 m range Each 16,346
1440 ditto but 2000 m range Each 17,244
1441 ditto but 3500 m range Each 20,886

Page 75 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix Fire Alarm sounders / Sirens


electronic type horizontal two stage
continuous normal operation for at least 50
1442 Each 12,096
minutes with sound level 65 db to 120 db
Measured at 1.5 m with sound output
variation of + 5 db 500m range
1443 ditto but 1000m range Each 14,420

1444 ditto but 1500m range Each 17,753

1445 ditto but 3500m range Each 21,601


Supply and fix Addressable manual call
1446 point break glass type with alarm LED Each 7,110
complete
1447 Response indicator unit complete Each 124
SWIMMING POOL FILTRATION PLANT

Supply and install filtration cum recycle plant


for swimming pool of size 50 x 21 x 2.85
1448 (Avg. depth) meter having total water Each 1,58,70,000
capacity 30,00,000 Litre suitable for 6 hr.
turn over period complete with following:

Filtration rate 500 M3/Hr

(a) Pressure filter suitable for flow rate of


125 M3/hr,pressure 2.5 Kg/cm2 ,4Nos

(b) Water circulating pump 5Nos(4 W +


1S)having discharge 125 M3/hr.

(c) Complete UPVC Pipe network, with in


filtration plant and from plant to swimming
pool basin, suitable for 10 Kg/cm2 pressure

(d) Valves, Valve battery its support,


chemical dosing pumps, tank agitators
(e) Pool basin accessories, pool cleaning
and maintenance equipment.

(f) Stainless steel Swimming pool Ladder ,


electric panel suitable for filtration plant etc

Page 76 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

(g) All E/M items except under water lighting

Add 20% for under water light in 30,00,000


1449
Litre capacity swimming pool
Supply and install filtration cum recycle plant
for swimming pool of size 25 x 13.5 x 2.35
1450 (Avg. depth) meter having total water Each 52,90,000
capacity 8,00,000 Litre suitable for 5-6 hr.
turn over period complete with following:
(a) Pressure filter suitable for flow rate of
80M3/hr,pressure 2.5 Kg/cm2 ,2Nos
(b) Water circulating pump 3Nos(2W +
1S)having discharge 80 M3/hr.

(c) Complete UPVC Pipe network, with in


filtration plant and from plant to swimming
pool basin, suitable for 10 Kg/Cm2 pressure

(d) Valves, Valve battery its support,


chemical dosing pumps, tank agitators

(e) Pool basin accessories,pool cleaning


and maintenance equipment.

(f) Stainless steel Swimming pool Ladder ,


electric panel suitable for filtration plant etc

(g) All E/M items except under water lighting


accounted
Add 15 % for under water lighting for
1451
8,00,000 Litre capacity swimming pool
Note : For Item No 1448 and 1451Cost of civil wks is extra
PRESSURE FILTER
Supply and fix Pressure filter for flow rate of
1452 Each 6,94,244
22 M3/hr.
1453 -- do but flow rate 35 M3/hr. Each 8,33,371
1454 -- do but flow rate 50 M3/hr. Each 9,59,977
1455 -- do but flow rate 62 M3/hr. Each 10,99,104
1456 -- do but flow rate 76 M3/hr. Each 12,38,231
1457 -- do but flow rate 90 M3/hr. Each 12,38,231
1458 -- do but flow rate 100 M3/hr. Each 13,77,358

Page 77 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

1459 -- do but flow rate 125 M3/hr. Each 20,71,602


1460 -- do but flow rate 150 M3/hr. Each 23,37,334
SWIMMING POOL WATER TREATMENT BASED ON CU++ AND AG++ ION
BASED TECHNOLOGY
Supply and fix Ionizer system for swimming
1461 Each 12,38,231
pool capacity up to 3.0 lakh litre
1462 .-- do but for capacity 3.0 to 5.0 lakh litre Each 15,61,701
1463 .-- do but for capacity 5.0 to 7.50 lakh litre Each 18,99,084
1464 .-- do but for capacity 7.5 to 10.0 lakh litre Each 23,09,509
1465 .-- do but for capacity 10.0 to 12.5lakh litre Each 26,99,064
.-- do but for capacity 12.5 to 15.0 lakh
1466 Each 30,39,925
litre
.-- do but for capacity 15.0 to 21.50 lakh
1467 Each 38,39,906
litre
.-- do but for capacity 24.0 to 32.0 lakh
1468 Each 57,38,989
litre
RO PLANT
Supply and fix Reverse Osmosis Plant of
1469 Each 60,042
out put capacity of 25 Litres per hour
Supply and fix Reverse Osmosis Plant of
1470 Each 1,85,605
out put capacity of 60 Litres per hour
Supply and fix Reverse Osmosis Plant of
1471 Each 2,28,550
out put capacity of 100 Litres per hour
Supply and fix Reverse Osmosis Plant of
1472 Each 2,90,343
out put capacity of 150 Litres per hour
NOTE: RO Rates include cost of civil wks,raw water/clear water storage
tank,softener,plumbing and electrical wks. Feed water characterstics:
Turbidity <5 ppm,Iron <0.3 ppm,ph range 6.5-7.2,total hardness
<500ppm,TDS<1500 ppm

Ser No 1473-1500 Blank

Page 78 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

SECTION-3
REFRIGERATION, AIR-CONDITIONING , REFRIGERATORS
&
CENTRAL HEATING SYSTEM
(ITEM NO 1501 to 1584)

Page 79 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

SECTION-3
REFRIGERATION, AIR-CONDITIONING , REFRIGERATORS
&
CENTRAL HEATING SYSTEM
(ITEM NO 1501 to 1584)
REFRIGERATORS

Supply and fix refrigerator, electric driven


1501 (single phase), capacity upto to 195 Each 18,382
Litres .BEE 5 star rated
Supply and fix refrigerator, electric driven
1502 (single phase), capacity more than 195 Each 26,609
Litres upto to 310 Litres.BEE 5 star rated
Supply and fix refrigerators, electric
driven (single phase), capacity more than
1503 Each 41,527
310 Litres upto to 360 Litres .BEE 5 star
rated

Supply and fix refrigerator, electric driven


1504 (single phase), capacity more than 360 Each 65,501
Litres upto to 460 Litres .BEE 5 star rated

WATER COOLER

Supply and fix water cooler electric driven


(single phase), having approx storage
1505 Each 34,322
capacity of 40 litre and nominal cooling
capacity of 40 Litres per hour.

Supply and fix water cooler electric driven


(single phase), having approx storage
1506 Each 38,819
capacity of 80 litre and nominal cooling
capacity of 40 Litres per hour.

Supply and fix water cooler electric driven


(single phase), having approx storage
1507 Each 46,478
capacity of 120 litre and nominal cooling
capacity of 60 Litres per hour.
Supply and fix water cooler electric driven
(single phase), having approx storage
1508 Each 57,524
capacity of 180 litres and nominal cooling
capacity of 150 Litres per hour.

Page 80 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

DEEP FREEZER
Deep freezer hard top up to 320 litre
1509 Each 29,191
capacity having single door.
Deep freezer glass top up to 320 litre
1510 Each 31,222
capacity having single door.
Deep freezer hard top more than 320 litre
1511 and up to 400 Litre capacity having Each 32,682
double door.
Deep freezer glass top more than 320
1512 litre and up to 400 Litre capacity having Each 37,475
double door.
EVAPORATIVE COOLER (DESERT COOLER)
Supply and fix desert cooler electric
driven (single phase), having nominal air
1513 Each 11,141
flow capacity of 4000 CuM per hour (or
nearest size).Plastic/PVC Body
Supply and fix desert cooler electric
driven (single phase), having nominal air
1514 Each 11,448
flow capacity of 5000 CuM per hour (or
nearest size).Plastic/PVC Body
Supply and fix desert cooler electric
driven (single phase), having nominal air
1515 Each 7,734
flow capacity of 4000 CuM per hour (or
nearest size).Steel body
Supply and fix desert cooler electric
driven (single phase), having nominal air
1516 Each 8,211
flow capacity of 5000 CuM per hour (or
nearest size).(Steel body)
Supply and fix desert cooler electric
driven (single phase), having nominal air
1517 Each 8,697
flow capacity of 6000 CuM per hour (or
nearest size).(*Steel body)
WINDOW AIR CONDITIONER
Supply and fix room window type air
conditioner electric driven (single phase),
1518 Each 42,194
cooling capacity 4500 K Cal per hour (
1.5 Ton).BEE 5 star rated
Supply and fix room window type air
conditioner electric driven (single
1519 Each 45,018
phase),cooling capacity 6000 K Cal per
hour ( 2 Ton).BEE 5 star rated

Page 81 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Add Rs 2000/- for cooling and heating


1520
type window A/Cs
Note:Window a/cs rate include th cost of wiring and switches etc

SPLIT AIR CONDITIONER


Supply and fix air cooled split unit air
1521 conditioner electric driven, single phase Each 46,796
of capacity of 1.5 TR, BEE 5 star rated
Supply and fix air cooled split unit air
1522 conditioner electric driven single phase of Each 54,530
capacity of 2 TR, BEE 5 star rated
Add Rs 4000/- for cooling and heating
1523
type split A/Cs
Note:Split a/c rate include th cost of wiring and switches etc
AIR CONDITIONER CASSETTEE TYPE
Supply and fix air cooled air conditioner
1524 electric driven, single phase of capacity Each 83,498
of 2.0 TO 2.5 TR
Supply and fix air cooled air conditioner
1525 electric driven, single phase of capacity Each 1,05,504
of 3.0 TO 3.5TR
Supply and fix air cooled air conditioner
1526 electric driven, single phase of capacity Each 1,35,213
of 4.0 TO 5.0TR
PACKAGE TYPE AIR CONDITIONING
Supply and fix air conditioner package
type suitable for operational on three
phase AC electric supply, including water
1527 Each 5,72,167
pump sets, cooling tower, ducting
plumbing and electric connection,
capacity 15000 K. cal Per hour (5 ton).
Supply and fix air conditioner package
type suitable for operational on three
phase AC electric supply, including water
1528 pump Sets, cooling tower, ducting Each 6,27,183
plumbing and electric connection,
capacity 22500 K cal Per hour (7.5 ton)
or nearest size.

Page 82 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix air conditioner package


type suitable for operational on three
phase AC electric supply, including water
1529 pump Sets cooling towers, ducting Each 7,04,205
plumbing and Electric connection,
capacity 30000 K. Cal Per hour (10 ton)
or nearest size.
Supply and fix air conditioners package
type including heating arrangement
suitable for operational on three phase
AC electric supply, including water pump
1530 Each 7,59,221
Sets cooling tower, ducting plumbing and
Electric connection, with strip heater
capacity 15000 K. Cal Per hour (5 ton) or
nearest size.
Supply and fix air conditioner package
type including heating arrangement
suitable for operational on three phase
AC electric supply, including water pump
1531 Each 8,03,234
sets, cooling tower, ducting plumbing and
Electric connection, with strip heater
capacity 22500 K cal Per hour (7.5 ton)
or nearest size.
Supply and fix air conditioner package
type including heating arrangement
suitable for operational on three phase
AC electric supply, including water pump
1532 Each 8,47,247
sets, cooling towers, ducting plumbing
and electric connection, with strip heater
capacity 30000 K cal Per hour (10 ton) or
nearest size.
CENTRAL AIR CONDITIONING PLANTS
Supply and fix central air conditioning
installations including AHUs, water pump
sets, cooling towers, ducting and
1533 Per TR 1,02,309
electrical connection suitable for 3 phase,
AC supply direct expansion system
capacity up to 10 Ton.
Supply and fix central air conditioning
installations including AHUs,water pump
sets cooling towers, ducting and electrical
1534 Per TR 93,274
connection suitable for 3 phase, AC
supply direct expansion system of
capacity 11 to 20 TR

Page 83 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix central air conditioning


installations including AHUs,water pump
sets, cooling towers, ducting and
1535 Per TR 91,623
electrical connection suitable for 3 phase,
AC supply direct expansion system of
capacity 21 to 40 TR
Supply and fix central air conditioning
installations including AHUs, water pump
sets cooling towers, ducting and electrical
1536 Per TR 87,518
connection suitable for 3 phase, AC
supply direct expansion system of
capacity above 40 TR
Supply and fix central air conditioning
installations including AHUs,water pump
sets cooling towers, ducting and electrical
1537 Per TR 1,06,617
connection suitable for 3 phase, AC
supply chilled water system of capacity
upto 40 TR
Supply and fix central air conditioning
installations including AHUs, water pump
sets, cooling towers, ducting and
1538 Per TR 94,908
electrical connection suitable for 3 phase,
AC supply chilled water system of
capacity above 40 Ton and upto 100 TR
Supply and fix central air conditioning
installations including AHUs,water pump
sets, cooling towers, ducting and
1539 Per TR 93,059
electrical connection suitable for 3 phase,
AC supply chilled water system of
capacity above 100 TR
Add for provisions of winter heating and
1540 Per TR Add 7.5%
humidification
Rates of DX
1541 In case A/C by VRV/VRF tech per TR type to be
adopted
PRECISION AIR CONDITIONING
Supply and fix precision air conditioner
1542 Per Job 17,98,082
capacity 21000 K cal Per hour (7 ton)
Supply and fix precision air conditioner
1543 Per Job 21,25,501
capacity 30000 K cal Per hour (10 ton)
Supply and fix precision air conditioner
1544 Per Job 48,91,505
capacity 750000 K cal Per hour (25 ton)

Page 84 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Supply and fix precision air conditioner


1545 Per Job 57,48,850
capacity 900000 K cal Per hour (30 ton)
AIR CURTAIN
1546 Supply & fix air curtain 3 ft Each 13,294
1547 Supply & fix air curtain 4 ft Each 16,230
1548 Supply & fix air curtain 5 ft Each 20,293
1549 Supply & fix air curtain 6 ft Each 26,588
1550 Supply and fix air curtain sensor Each 3,693
CHEMICAL DEHUMIDIFIERS
Supply and fix chemical dehumidifier
continuous operating complete, with
1551 Each 1,64,086
heaters, ducting, electrical connection
for 100 Cfm capacity
1552 do -- but for capacity 180 Cfm Each 2,14,023
1553 do -- but for capacity 360 Cfm Each 3,85,250
1554 do -- but for capacity 600 Cfm Each 6,42,069
1555 do -- but for capacity 900 Cfm Each 9,27,433
1556 do -- but for capacity 1200 Cfm Each 11,12,921

CENTRAL HEATING SYSTEM (Oil fired)

S&F Central heating system of 25000


1557 Job 11,58,352
kcal/ Hr
1558 -do- but 50000 (Kcal/Hr) Job 19,11,066
1559 -do- but 100000 (Kcal/Hr) Job 38,92,118
1560 -do- but 150000 (Kcal/Hr) Job 50,64,752
1561 -do- but 200000 (Kcal/Hr) Job 66,10,173
1562 -do- but 250000 (Kcal/Hr) Job 81,25,599
1563 -do- but 300000 (Kcal/Hr) Job 96,22,458
1564 -do- but 350000 (Kcal/Hr) Job 1,13,16,421
1565 -do- but 400000 (Kcal/Hr) Job 1,16,93,863
1566 -do- but 450000 (Kcal/Hr) Job 1,23,14,803
1567 -do- but 500000 (Kcal/Hr) Job 1,36,83,114
1568 -do- but 600000 (Kcal/Hr) Job 1,88,49,276
1569 -do- but 800000 (Kcal/Hr) Job 2,52,49,488
1570 -do- but1000000 (Kcal/Hr) Job 3,19,13,936
Note:Item 1557-1576 Rates includes all items of CHS viz boiler,piping,pumps(W+S),heat
exchanger ,insulation,FCU, ducts, foundations etc, except cost of stand by boiler which
is to be added seprately
BOILER(OIL FIRED) (1571 to 1584)
1571 S&F Boilers of Sizes 25000 (Kcal/Hr) Each 3,33,765
1572 -do- but sizes 50000 (Kcal/Hr) Each 5,03,027
1573 -do- but sizes 100000 (Kcal/Hr) Each 7,25,009

Page 85 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

1574 -do- but sizes 150000 (Kcal/Hr) Each 8,76,395


1575 -do- but sizes 200000 (Kcal/Hr) Each 10,90,666
1576 -do- but sizes 250000 (Kcal/Hr) Each 11,84,551
1577 -do- but sizes 300000 (Kcal/Hr) Each 14,96,885
1578 -do- but sizes 350000 (Kcal/Hr) Each 16,09,603
1579 -do- but sizes 400000 (Kcal/Hr) Each 18,60,666
1580 -do- but sizes 450000 (Kcal/Hr) Each 20,35,328
1581 -do- but sizes 500000 (Kcal/Hr) Each 20,63,100
1582 -do- but sizes 600000 (Kcal/Hr) Each 22,50,407
1583 -do- but sizes 800000 (Kcal/Hr) Each 31,09,145
1584 -do- but sizes 1000000 (Kcal/Hr) Each 42,11,198

Ser No 1585-2000 Blank

Page 86 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

SECTION-4
TOOLS & PLANTS
(Item No 2201 to 2322)

Page 87 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

SECTION-4
TOOLS & PLANTS
(Item No 2201 to 2322)
ALUMINUM LADDER
Self supporting cum extendable Aluminium
2201 Each 22,286
Ladder of 12 feet extendable upto 21 feet.
Self supporting cum extendable Aluminium
2202 Each 34,717
Ladder of 18 feet extendable upto 32 feet.
2203 Normal Aluminium ladder of 12 feet Each 7,823
Wall supported extendable aluminium ladder
2204 Each 12,337
12 feet extendable upto 12 feet
Wall supported extendable aluminium ladder
2205 Each 15,899
16 feet extendable upto 30 feet
CRIMPING TOOLS
2206 Wire Stripper Each 329
2207 Cable cutter upto 10 Sqmm Each 670
2208 Pliers 1.5 Sqmm to 6 Sqmm Each 1,409
Crimping pliers to crimp the end sealing
2209 Each 1,767
ferrules from 0.5 to 16 Sqmm
Crimping pliers to crimp the end sealing
2210 Each 2,588
ferrules from 0.5 to 16 Sqmm
Crimping pliers to crimp the end sealing
2211 Each 3,439
ferrules from 16 to 50 Sqmm
Crimping pliers to crimp the end sealing
2212 Each 7,593
ferrules from 10 to 95 Sqmm
Crimping pliers to crimp the end sealing
2213 Each 8,187
ferrules from 95 to 185 Sqmm
Crimping pliers to crimp the end sealing
2214 Each 33,353
ferrules from 95 to 400 Sqmm
DIGITAL METER
AC Power clamp on meter to measure
2215 Each 34,491
KWH, KVA, KVAR Voltage
Digital insulation resistance meter 1000V, 0
2216 Each 9,097
- 2000 M ohm
Motor operated insulation tester 500 V, upto
2217 1000M Ohm with carrying case and HV Each 27,289
testing leads.

Page 88 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Motor operated insulation tester 5000 V,


2218 upto 10000M Ohm with carrying case and Each 31,079
HV testing leads.
Motor operated insulation tester 2500 V,
2219 upto 10000M Ohm with carrying case and Each 50,534
HV testing leads.
Earth resistance tester 0 to 2000 Ohm
2220 complete with 4 spikes 4 test leads, Each 28,006
charging lead and carrying case
OTHER METER
Digital Tachometer (Contact & Non-contact
2221 Each 5,299
type)
2222 Digital Sound level meter Each 16,411
2223 Digital thermo hygro meter Each 1,573
High voltage testing kit for testing of
2224 Each 63,673
electrical installation 0-5KV
Electrical metal scanner to detect PVC
2225 Each 3,033
conduit/metal pipes behind tiles/concrete
Circuit breaker finder kit locate break in
2226 Each 3,651
power circuit
Digital lux meter for measurement of light
2227 Each 7,543
upto 50,000 lux
AC/DC digital clamp meter, 1000A DC/
2228 Each 10,772
800A AC
2229 Digital temperature and humidity meter Each 13,645
2230 Digital millimetre AC Each 26,334
2231 Digital sound level meter Each 29,184
DRILL & BLOWER
Electric operated drill for drilling in steel for
2232 Each 12,068
10 mm dia hole.
Electric operated blower for air volume 2.7
2233 Each 8,831
cu meter/min
COMMON HAND TOOLS
Adjustable spanner of length 155mm
2234 Each 284
confirming to IS-6149
Adjustable spanner of length 255mm
2235 Each 480
confirming to IS-6149
Adjustable spanner of length 305mm
2236 Each 631
confirming to IS-6149
Adjustable spanner of length 380mm
2237 Each 1,266
confirming to IS-6149
Combination Pliers of 165 mm confirming to
2238 Each 323
IS-3650

Page 89 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Combination Pliers of 185 mm confirming to


2239 Each 342
IS-3650
Combination Pliers of 210 mm confirming to
2240 Each 372
IS-3650
Water pump plier of 200 mm confirming to
2241 Each 408
IS-6118
Water pump plier of 250 mm confirming to
2242 Each 448
IS-6118
2243 Nose plier of 165 mm confirming to IS-3552 Each 326
2244 Side cutting plier of 165 mm Each 297
Screw driver of 100 mm confirming to IS-
2245 Each 60
844
Screw driver of 150 mm confirming to IS-
2246 Each 92
844
Screw driver of 200 mm confirming to IS-
2247 Each 103
844
Screw driver of 250 mm confirming to IS-
2248 Each 133
844
Screw driver of 300 mm confirming to IS-
2249 Each 185
844
2250 Pipe wrench 250 mm confirming to IS-4003 Each 591
2251 Pipe wrench 300 mm confirming to IS-4003 Each 792
2252 Pipe wrench 450 mm confirming to IS-4003 Each 1,722
Chain pipe wrench of size 4 confirming to
2253 Each 5,935
IS-4123
Chain pipe wrench of size 6 confirming to
2254 Each 8,290
IS-4123
Chain pipe wrench of size 8 confirming to
2255 Each 12,104
IS-4123
2256 Pipe vice of size 2 confirming to IS-6007 Each 3,578
2257 Pipe vice of size 4 confirming to IS-6008 Each 6,307
Hammer with handle (Ball pein and cross
2258 pein) of 200 gms weight confirming to IS- Each 262
841
Hammer with handle (Ball pein and cross
2259 pein) of 340 gms weight confirming to IS- Each 351
842
Hammer with handle (Ball pein and cross
2260 pein) of 500 gms weight confirming to IS- Each 398
843
Clave hammer with handle of 340 grm
2261 Each 422
weight
Clave hammer with handle of 450 grm
2262 Each 454
weight

Page 90 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Double ended spanner (Plain) confirming to


2263 Each 34
IS-2028 of size 6 x7 mm
Double ended spanner (Plain) confirming to
2264 Each 33
IS-2028 of size 8 x9 mm
Double ended spanner (Plain) confirming to
2265 Each 32
IS-2028 of size 8 x10 mm
Double ended spanner (Plain) confirming to
2266 Each 34
IS-2028 of size 9 x11 mm
Double ended spanner (Plain) confirming to
2267 Each 35
IS-2028 of size 10 x11 mm
Double ended spanner (Plain) confirming to
2268 Each 37
IS-2028 of size 10 x12 mm
Double ended spanner (Plain) confirming to
2269 Each 45
IS-2028 of size 12 x13 mm
Double ended spanner (Plain) confirming to
2270 Each 54
IS-2028 of size 13 x16 mm
Double ended spanner (Plain) confirming to
2271 Each 47
IS-2028 of size 14 x15 mm
Double ended spanner (Plain) confirming to
2272 Each 61
IS-2028 of size 14 x17 mm
Double ended spanner (Plain) confirming to
2273 Each 61
IS-2028 of size 16 x 17 mm
Double ended spanner (Plain) confirming to
2274 Each 74
IS-2028 of size 18 x 19 mm
Double ended spanner (Plain) confirming to
2275 Each 79
IS-2028 of size 18 x 21 mm
Double ended spanner (Plain) confirming to
2276 Each 82
IS-2028 of size 19 x 22 mm
Double ended spanner (Plain) confirming to
2277 Each 104
IS-2028 of size 20 x 22 mm
Double ended spanner (Plain) confirming to
2278 Each 131
IS-2028 of size 21 x 23 mm
Double ended spanner (Plain) confirming to
2279 Each 135
IS-2028 of size 24 x 26 mm
Double ended spanner (Plain) confirming to
2280 Each 147
IS-2028 of size 24 x 27 mm
Double ended spanner (Plain) confirming to
2281 Each 191
IS-2028 of size 25 x 28 mm
Double ended spanner (Plain) confirming to
2282 Each 196
IS-2028 of size 30 x 32 mm
Ring spanner confirming to IS-2029 of size 6
2283 Each 71
x 7 mm

Page 91 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Ring spanner confirming to IS-2029 of size 8


2284 Each 79
x 9 mm
Ring spanner confirming to IS-2029 of size
2285 Each 96
10 x 11 mm
Ring spanner confirming to IS-2029 of size
2286 Each 101
12 x 13 mm
Ring spanner confirming to IS-2029 of size
2287 Each 115
14 x 15 mm
Ring spanner confirming to IS-2029 of size
2288 Each 133
16 x 17 mm
Ring spanner confirming to IS-2029 of size
2289 Each 164
18 x 19 mm
Ring spanner confirming to IS-2029 of size
2290 Each 194
20 x 22 mm
Ring spanner confirming to IS-2029 of size
2291 Each 231
21 x 23 mm
Ring spanner confirming to IS-2029 of size
2292 Each 292
24 x 26 mm
Ring spanner confirming to IS-2029 of size
2293 Each 339
25 x 28 mm
Ring spanner confirming to IS-2029 of size
2294 Each 423
30 x 32 mm
2295 Allen Keys of size 4 mm Each 17
2296 Allen Keys of size 6 mm Each 31
2297 Allen Keys of size 8 mm Each 51
2298 Allen Keys of size 10 mm Each 82
2299 Allen Keys of size 14 mm Each 220
2300 Allen Keys of size 17 mm Each 367
CENTRIFUGE MACHINE FOR TRANSFORMER OIL
Centrifuge machine complete with filter
2301 Heater, pump suitable for 230 V AC supply Each 3,63,845
for capacity 250 Litre/hr.
2302 -do- but for capacity 500 Litre/hr. Each 3,94,165
-do- but suitable for three phase supply 415
2303 Each 5,21,284
Volts and for capacity 1250 Litre/hr.
-d0- but suitable for three phase supply 415
2304 Each 6,32,635
Volts and for capacity 2000 Litre/hr.
DISCHARGE ROD
Wooden discharge rod PVC Coated suitable
2305 Each 6,065
for 11 KV
2306 -do- but for 33 KV Each 7,581
2307 Fibre glass discharged rod for 11 KV Each 17,435

Page 92 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

2308 -do- but for 33 KV Each 23,499

2309 Telestone type fibre glass discharge rod Each 33,353

CABLE FAULT LOCATING MACHINE


Cable fault locating instrument suitable to
locate and pin point faults in LT Cables to 33
KV cables including following instruments:-
(i) Impulse generator 0-33 KV.
(ii) Acoustic fault locator to pin point the fault
2310 Each 13,46,419
exactly at fault point
(iii) Reflectometer (Laptop based) TDR set
=input wave capturing
(iv) High voltage Murray loop for % distance
to constant leakage faults
Route tracing instrument to trace the route
2311 Each 2,31,698
of buried cable
WATER SUPPLY
2312 Chlorine gas mask with jumbo canister Each 10,613
Air breathing apparatus with cylinder for 30
2313 Each 58,216
min. duration
Emergency safety kit to stop leakage of
2314 Each 45,102
chlorine gas from cylinder
Rubber/PVC hand gloves to handle chlorine
2315 Each 455
gas/liquid
Rubber/PVC gum boots to handle chlorine
2316 Each 2,275
gas/liquid
Chlorine gas leakage detector with sensor
2317 Each 1,02,332
and alarm
New empty 100 Kgs capacity chlorine
2318 Each 46,997
cylinder fitted with valves and valve guard
Chlorine test kit with coloured ample
2319 complete with all testing fitments and OT Each 2,411
solution in Rexene finished box
PH test kit with coloured ample covered
under BTB (range 6.0 to 7.0) or phenol red
2320 (range 6.8 to 8.4) with necessary fitments Each 3,033
and 100 ml testing solution in Rexene
finished box
2321 Iron test kit Each 3,942
SWIMMING POOL

Page 93 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Item No Description of Item Unit Rate

Suction Sweeper complete with motor,


2322 pump & starter, mounted on trolley including Each 1,09,002
nylon rope, hose pipe float etc complete.

Page 94 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

SECTION-5
SEWAGE COLLECTION, TREATMENT, DISPOSAL & REUSE
(Item No 3001 to 3185)

Page 95 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

5. PUBLIC HEALTH ENGINEERING

5.1 GRAVITY SEWERS (Item No 3001 to 3040)

RCC NP3 150 mm diameter Pipes laid on150 mm thick bed with excavation in any type of soil, including
manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating
cover and frame. Includes all items and activities to execute and make sewer line functional.
Item
For depth UNIT AMOUNT (Rupees)
No
TYPE OF BEDDING
(Type of Bedding to be decided by designer)
150 mm th. 150 mm th. PCC 150 mm th. RCC 150 mm th. RCC
Moorum /Sand / Cradle Cradle with 0.4% Arch with 1%
Crushed stone PCC 1:4:8 reinforcement reinforcement
3001 0.70m 1.65 m RM 928 1,332 1,358 1,945
3002 1.65 2.30 m RM 1,492 1,896 1,921 2,381
3003 2.30 4.50 m RM 2,616 2,997 3,023 3,481
3004 4.50 m 6.0 m RM 4,299 4,654 4,787 5,139

DWCPE (SN8) 180 (OD)/163(ID) mm diameter Pipes laid on 150 mm thick bed with excavation in any type
of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with
SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line
functional.
3005 0.70m 1.65 m RM 1,224 As per IS 16098 (Part 2) : 2013 para A-4.1.2.4(a) any
form of cement concrete structural bedding would
3006 1.65 2.30 m RM 1,788 not be necessary under normal conditions, even for
3007 2.30 4.50 m RM 2,913 maximum combined loading (wheel load + backfill).
However designer may check requirement for
3008 4.50 m 6.0 m RM 4,594
special cases.

Page 96 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

RCC NP3 200 mm diameter Pipes laid on 150 mm thick bed with excavation in any type of soil, including
manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating
cover and frame. Includes all items and activities to execute and make sewer line functional.
AMOUNT (Rs)
TYPE OF BEDDING
(Type of Bedding to be decided by designer)
ITEM
FOR DEPTH UNIT 150 mm th.
NO 150 mm th. RCC 150 mm th. RCC
Moorum /Sand 150 mm th. PCC
Cradle with 0.4% Arch with 1%
/ Crushed Cradle PCC 1:4:8
reinforcement reinforcement
stone
3009 0.70m 1.65 m RM 1,068 1,532 1,563 2,238
3010 1.65 2.30 m RM 1,631 2,074 2,101 2,604
3011 2.30 4.50 m RM 2,756 3,157 3,184 3,667
3012 4.50 m 6.0 m RM 4,437 4,804 4,942 5,305

DWCPE(SN8) 200 (OD)/175(ID)mm diameter Pipes laid on 150 mm thick bed with excavation in any type
of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with
SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line
functional.
As per IS 16098 (Part 2) : 2013 para A-4.1.2.4(a) any
3013 0.70m 1.65 m RM 1,473 form of cement concrete structural bedding would
not be necessary under normal conditions, even for
3014 1.65 2.30 m RM 2,037 maximum combined loading (wheel load + backfill).
3015 2.30 4.50 m RM 3,161 However designer may check requirement for
3016 4.50 m 6.0 m RM 4,842 special cases

Page 97 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

RCC NP3 250 mm diameter Pipes laid on 150 mm thick bed with excavation in any type of soil, including
manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating
cover and frame. Includes all items and activities to execute and make sewer line functional.

AMOUNT (Rs)
TYPE OF BEDDING
(Type of Bedding to be decided by designer)
ITEM 150 mm th.
FOR DEPTH UNIT Moorum 150 mm th. 150 mm th. RCC
NO 150 mm th. RCC Arch
/Sand / PCC Cradle Cradle with 0.4%
with 1% reinforcement
Crushed PCC 1:4:8 reinforcement
stone
3017 0.70m 1.65 m RM 1,233 1,638 1,805 2,584
3018 1.65 2.30 m RM 1,795 2,160 2,313 2,865
3019 2.30 4.50 m RM 2,921 3,262 3,375 3,886
3020 4.50 m 6.0 m RM 4,602 4,927 5,126 5,502

DWCPE(SN8) 300(OD)/260(ID) mm diameter Pipes laid on 150 mm thick bed with excavation in any type
of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with
SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line
functional.

As per IS 16098 (Part 2) : 2013 para A-4.1.2.4(a) any


3021 0.70m 1.65 m RM 1,845
form of cement concrete structural bedding would not
3022 1.65 2.30 m RM 2,409 be necessary under normal conditions, even for
3023 2.30 4.50 m RM 3,534 maximum combined loading (wheel load + backfill).
However designer may check requirement for special
3024 4.50 m 6.0 m RM 5,216 cases.

Page 98 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

RCC NP3 300 mm diameter Pipes laid on 150 mm thick bed with excavation in any type of soil, including
manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating
cover and frame. Includes all items and activities to execute and make sewer line functional.

AMOUNT (RS)
TYPE OF BEDDING
(Type of Bedding to be decided by designer)

FOR DEPTH 150 mm th.


150 mm th. RCC 150 mm th. RCC
ITEM Moorum /Sand 150 mm th. PCC
Cradle with 0.4% Arch with 1%
NO / Crushed Cradle PCC 1:4:8
reinforcement reinforcement
stone

3025 0.70m 1.65 m RM 1,410 2,025 2,065 2,956


3026 1.65 2.30 m RM 1,973 2,507 2,541 3,149
3027 2.30 4.50 m RM 3,099 3,550 3,580 4,123
3028 4.50 m 6.0 m RM 4,780 5,176 5,324 5,714

RCC NP3 350 mm diameter Pipes laid on 150 mm thick bed with excavation in any type of soil, including
manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating
cover and frame. Includes all items and activities to execute and make sewer line functional.
3029 0.70m 1.65 m RM 1,981 2,843 2,900 3,833
3030 1.65 2.30 m RM 2,544 3,234 3,278 4,061
3031 2.30 4.50 m RM 3,669 4,203 4,239 4,882
3032 4.50 m 6.0 m RM 5,350 5,793 5,959 6,396

Page 99 of 115
ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

RCC NP3 400 mm diameter Pipes laid on 150 mm thick bed with excavation in any type of soil, including
manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating
cover and frame. Includes all items and activities to execute and make sewer line functional.

AMOUNT (Rs)
TYPE OF BEDDING
(Type of Bedding to be decided by designer)
ITEM
FOR DEPTH UNIT 150 mm th.
NO 150 mm th. Moorum 150 mm th. RCC
150 mm th. PCC RCC Arch
/Sand / Crushed Cradle with 0.4%
Cradle PCC 1:4:8 with 1%
stone reinforcement
reinforcement

3033 0.70m 1.65 m RM 2,171 3,117 3,178 4,233


3034 1.65 2.30 m RM 2,734 3,474 3,521 4,362
3035 2.30 4.50 m RM 3,860 4,421 4,458 5,134
3036 4.50 m 6.0 m RM 5,541 5,999 6,170 6,623

RCC NP3 450 mm diameter Pipes laid on 150 mm thick bed with excavation in any type of soil, including
manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating
cover and frame. Includes all items and activities to execute and make sewer line functional.

3037 0.70m 1.65 m RM 2,367 3,397 3,465 4,537


3038 1.65 2.30 m RM 2,931 3,724 3,775 4,676
3039 2.30 4.50 m RM 4,055 4,646 4,685 5,395
3040 4.50 m 6.0 m RM 5,738 6,212 6,390 6,859
Notes for Sewers (3001 to 3040)
(a) Add extra percentage for exc. In soft rock 15% and In hard rock 45 %
(b) Add extra for pipes laid under sub-soil water conditions and/or in soils of treacherous nature,
by 6% for timbering, dewatering of trenches etc.
(c) Estimates include 4 MH per 100RM.

Page 100 of 115


ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

SEPTIC TANKS AND SHALLOW SEWER. (3051 to 3065)

RCC HUME PIPE SEPTIC TANKS


On site Hume Pipe septic tank designed to carry sewage and sullage water, excavation in
any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for
ITEM NO
ITEM UNIT AMOUNT (Rupees)

3051 05 users. Each 15,870


3052 10 users. Each 26,450

LLDPE SEPTIC TANKS


ITEM
ITEM UNIT AMOUNT (Rupees)
NO

On site LLDPE septic tank designed to carry sewage and sullage water, excavation in any
type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for

AMOUNT (Rupees)
CODE ITEM UNIT With UPFLOW FILTER
CONVENTIONAL
INLCUDING MEDIA
3053 05 users. Each 23,299 28,023
3054 10 users. Each 41,813 50,176
3055 20 users. Each 79,438 95,325
3056 25 users. Each 1,01,162 1,21,394
3057 30 users. Each 1,22,854 1,47,423

Page 101 of 115


ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

RCC SEPTIC TANK


ITEM AMOUNT (Rupees)
ITEM UNIT
NO CONVENTIONAL With UPFLOW FILTER
RCC Septic tank designed to carry sewage and sullage water, excavation in any type of soil,
PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof
Slab including beams etc with Vent shaft , manhole openings with cover connection etc.,
complete with effective depth of 1.5 meter and overall depth of 3 meter for
3058 50 users. Each 6,30,627 7,56,752
3059 100 users. Each 8,90,449 10,68,539
3060 150 users. Each 11,08,650 13,30,379
Notes for 3051 to 3060):
(1) Effluent from septic tank to be taken to nearby manhole/Sump/STP through shallow sewers. If this
option is not available then it is to be disposed off in soakage pits.
(2) Septage from septic tank is to be pumped out once in a year and disposed off safely in nearby STP /
Oxidation pond / Sludge drying beds.

SHALLOW SEWERS
ITEM AMOUNT (Rs)
ITEM UNIT
NO RCC NP3 DWCPE (SN8)
100 mm diameter Pipes laid on 150 mm thick moorum/sand/crushed stone bed with
excavation up to depth 1.65 m in any type of soil, including manholes of standard size made of
Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and
activities to execute and make sewer line functional.
3065 RM 690 660
Imp : for extra due to soil strata or high water table apply as per note for gravity sewers.

Page 102 of 115


ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

SOAL WELL (3068 to 3082)

SOAKAGE WELL
Imp : Soak pits must to be constructed in pair for each septic tank but to be used alternately.
Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed
masonry with top ring of M25 concrete including intercepting chamber and screen chamber
made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of
RCC/DWC complete filled with brick bats of size
ITEM
ITEM UNIT AMOUNT (Rs)
NO
3068 1.2 M dia X 1.5 M effective depth Each 20,599
3069 1.2 M dia X 3 M effective depth Each 25,798
3070 1.2 M dia X 4.5 M effective depth Each 30,997
3071 1.8 M dia X 3.0 M effective depth Each 39,814
3072 1.8 M dia X 4.5 M effective depth Each 48,738
3073 1.8 M dia X 6.0 M effective depth Each 57,662
3074 2.4 M dia X 3.0 M effective depth Each 57,933
3075 2.4 M dia X 4.5 M effective depth Each 71,360
3076 2.4 M dia X 6.0 M effective depth Each 84,787
3077 3 M dia X 3.0 M effective depth Each 80,157
3078 3 M dia X 4.5 M effective depth Each 98,864
3079 3 M dia X 6.0 M effective depth Each 1,17,570
3080 3.6 M dia X 3.0 M effective depth Each 98,589
3081 3.6 M dia X 4.5 M effective depth Each 1,23,352
3082 3.6 M dia X 6.0 M effective depth Each 1,48,115

Page 103 of 115


ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

SUMP WELL CUM PUMP HOUSES (3101 to 3133)

Designing (hydraulically, structurally and aesthetically), and constructing RCC sumps in M-30 mix
of required capacity including excavation in all types of strata, foundation concrete, container
walls, bottom slab, top RCC roof slab with CI manhole covers and with plaster and water proofing
as per zonal specification including epoxy paint inside, refilling of earth and disposal of surplus
earth within 50 m lead, including all piping connections, valves, internal electrification, MS ladder,
ventilation shaft, BB chambers with 5m of outer wall of tank complete including test for water
tightness and hydraulic functioning. Top room as per zonal specifications included.
Overall IL of Inner Dia
Av Flow
ITEM NO Depth of incoming of sump Amount (Rs)
(Cum/d)
sump (m) sewer (m) well (m)
3101 Upto 50 6 upto 4.0 2 2,87,076
3102 upto 50 7 4.0 - 5.0 2 3,25,675
3103 51 - 100 6.5 upto 4.0 2 3,06,375
3104 51 - 100 7 4.0 - 5.0 2 3,25,675
3105 101 - 200 7 upto 4.0 2 3,25,675
3106 101 - 200 7.5 4.0 - 5.0 2.5 4,21,800
3107 201 - 200 8 5.0 - 6.0 3 5,28,722
3108 201 - 300 7 upto 4.0 2.5 3,98,798
3109 201 - 300 8 4.0 - 5.0 2.5 4,45,108
3110 201- 300 8.5 5.0 - 6.0 3 5,55,732
3111 301 - 400 7 upto 4.0 3 4,75,007
3112 301 - 400 8 4.0 - 5.0 3 5,28,722
3113 301 - 400 8.5 5.0 - 6.0 3.5 6,46,134
3114 401 - 500 8 upto 4.0 3 5,28,722
3115 401 - 500 8.5 4.0 - 5.0 3 5,55,732

Page 104 of 115


ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Overall IL of Inner Dia


Av Flow
ITEM NO Depth of incoming of sump Amount (Rs)
(Cum/d)
sump (m) sewer (m) well (m)
3116 401 - 500 8.5 5.0 - 6.0 4 7,39,621
3117 501 - 600 8.5 upto 4.0 3 5,55,732
3118 501-600 8.5 4.0-5.0 3.50 6,46,134
3119 501 - 600 8.5 5.0 - 6.0 4.5 8,36,193
3120 601 - 800 8.5 upto 5.0 3.5 6,46,134
3121 601 - 800 8.5 5.0 - 6.0 4.5 8,36,193
3122 801 - 1000 8.5 upto 5.0 3.5 6,46,134
3123 801- 1000 8.5 5.0 - 6.0 4.5 8,36,193
3124 1001 - 1200 8.5 upto 5.0 4 7,39,621
3125 1001 - 1200 8.5 5.0 - 6.0 5 9,35,851
3126 1201 - 1400 8.5 upto 5.0 4 7,39,621
3127 1201 - 1400 8.5 5.0 - 6.0 5 9,35,851
3128 1401 - 1600 9 upto 5.0 4 7,74,037
3129 1401 - 1600 9 5.0 - 6.0 4.5 8,74,311
3130 1601 - 1800 9 upto 5.0 4 7,74,037
3131 1601 - 1800 9 5.0 - 6.0 5 9,77,671
3132 1801 - 2000 9 upto 5.0 4.5 8,74,311
3133 1801 - 2000 9 5.0 - 6.0 5.5 10,84,117

Note : For sump wells under sub-soil water conditions and/or in soils of treacherous nature, the rates
of above items are to be increased by 6% for timbering, dewatering of trenches etc.

Page 105 of 115


ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

SUBMERSIBLE PUMPS (Item No 3134 to 3155)

Non clog vertical submersible pumps with chrome steel impeller and cutter, non-clog to
pass 40 mm size particles including Supply, installation with guide rail and lifting chain,
cables, Earthing, testing complete with 2 years maintenance
Duty Duty (Flow H.P. of Amount
ITEM (Flow and H.P. of CODE and head) Pump
Amount
NO head) Pump lpm x m
lpm x m
3134 50x25 1 22,265 3146 600x25 5 28,316
3135 75x25 1 22,265 3147 600x40 7.5 41,431
3136 100x25 1 24,081 3148 700x40 10 48,623
3137 125x25 3 24,081 3149 800x40 10 48,623
3138 150x25 3 24,081 3150 900x40 10 65,490
3139 175x25 3 24,081 3151 1000x40 15 74,162
3140 200x25 3 24,081 3152 1250x40 20 82,307
3141 250x25 3 24,081 3153 1500x40 20 89,952
3142 300x25 3 24,081 3154 2000x40 30 1,35,727
3143 350x25 3 28,316 3155 2500x40 35 1,51,162
3144 400x25 3 28,316
3145 500x25 5 28,,316

Page 106 of 115


ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

5.6 Sewage Treatment Plant (MBBR Based). (Code 3171 to 3185)

MBBR BASED STPs

STP : PROCESS DESCRIPTION MOVING BED BIO REACTOR (MBBR)

The Moving Media Bio Reactor Technology is a advanced biological treatment process which has a combination of activated
sludge process and attached growth process. The bio reactor has lot of packing material called carrier media in suspension
and provides a large surface area for micro organisms to grow and degrade the organic matter in aerobic condition. Due to
the use of carrier media, the higher concentration of bio mass is developed which helps to reduce the basin size, accept higher
loading rates and take shock loads.

The sewage after screening and grit removal flows by gravity into the BIO REACTOR wherein the attached growth, aerobic
microbes will utilize pollutant in presence of oxygen thereby, further reducing BOD. The air required will be provided through
coarse bubble air diffusers provided on the aeration grid at the bottom of reactor and using positive displacement, twin lobe,
root type air blower for supply of oxygen The PP media is provided in the aeration tank to allow the aerobic microbes to grow
and get attached. This media remains in fluid state in the aeration tank thereby keeping large number of microbial colonies
moving in the tank and provide high concentration of bio mass available at all the time. The microbes get exposed to bio
degradable organics in presence of oxygen and convert it into cell biomass, water molecule and carbon-dioxide. The microbial
colony grows on plastic media. The excess bio mass gets sloughed and moves with treated water into subsequent unit. This
sloughing action is a continuous process and the microbes keep on growing and sloughing. This is a very fast process and
hence system becomes self sustaining.

The dead bio mass generated will be separated in the CLARISETTLER TANK wherein tube media is provided for providing
additional surface area for settlement of bio mass and thereby reducing the space requirement. The solid-liquid separation is
achieved in this tank and clear supernatant will flow by gravity. The treated wastewater will be disinfected with Chlorine and
allowed to react in CHLORINE CONTACT TANK prior to suitable disposal.

Page 107 of 115


ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

TYPICAL CHARACTERITICS OF SEWAGE

(Note : Raw sewage are indicative only, actual tests must be carried out at site.)

Raw Sewage Quality Treated Sewage Quality

(refer table below for variations)

Parameter Value Parameter Without tertiary With Tertiary


treatment Treatment
Temperature =>200C Temperature Ambient Ambient

pH 6.5 8.5 pH 6.5 - 8.5 6.5 8.5

TSS 250 300 mg/L TSS < 30 mg/L < 10 mg/L

BOD5 at 20C 200 - 300 mg/L BOD5at 200C < 20 mg/L < 10mg/L

COD 350 450 mg/L FC MPN < 1000/ 100 ML < 230/100 ML

Oil & Grease 20 30 mg/L Helminths Egg <= 1 egg/L

FC MPN Very high Nitrate as N <= 10mg/L

Phosphorus as P < = 5 mg/L

Page 108 of 115


ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Actions for departure from standard Raw Sewage Characteristics

Temperature < 200C Add 8% extra for every drop of 50C for heating
and insulation to keep sewage temp at 200C.

pH <6.5 or >8.5 Any departure in pH requires detection and


isolation of source. To be treated separately.

Total Suspended >500mg/L Higher TSS shows ingress of surface runoff.


Solids Additional capacity of Primary Settling Tank
required.

BOD5 days at 20C >400 mg/L Higher BOD may be due to cattle farm/ butchery/
hospital. To be isolated and treated separately.

COD >600 mg/L Higher COD may be due to industrial pollutants, to


be isolated and treated separately.

Oil & Grease >30 mg/L Higher oil & grease may be due to vehicle wash or
large kitchen waste. Additional Oil & Grease at
source required.

MPN >107per 100 ML May be due to butchery/ hospital. To be isolated


and treated separately.

Page 109 of 115


ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

STP (MBBR) 100 to 600 Cum/day capacity

Designing (hydraulically, structurally & aesthetically), providing, constructing, hydraulic testing,


commissioning and giving satisfactory trials of STP consisting of Inlet chamber(RCC), Fine bar Screen
chamber(manual) RCC with steel screen, Oil & Grease Remover(RCC), Grit separator, Equalization Tank(
2 Tanks of 50% Capacity each), Air Grid for Equalization Tanks, Feed Pumps(2 No), Moving Bed Bio
Reactor(s) with plastic media (of appropriate density, size and quantity to keep very high MLSS > 15,000
mg/lit), Air Blowers for MBBR, Tube Settler assembly, Sludge Drying Bed of appropriate size, Chlorine
Dozing System, Chlorine contact tank, Foundation for all E/M equipments, Associated piping work with
required valves, gates, drains, pathways, Electrical control Panel with interconnecting cable, spare parts for
2 years of operation, etc. complete as turnkey job with all involved civil, electrical, digital and mechanical
works as per detailed specifications for civil, electrical and mechanical components with all duties and taxes
complete. (Also refer imp notes below).

For tertiary treatment it also includes Filter Feed Tank of RCC, Filter Feed Pumps, Dual Media Filter,
Activated Carbon Filter, Treated water Tank in RCC. Treated sewage can be used for irrigation,
horticulture, fire fighting and MT wash.

ITEM NO Capacity Equivalent Land Area Rate (in Lakh)


(Cum/day) population Required
with Tertiary without Tertiary
Load (with 180 (SM)
Treatment Treatment
lpcd)
3171 100 556 250 52.09 42.69

3172 200 1,111 250 61.55 50.46

3173 300 1,667 250 75.74 62.08

3174 400 2,222 300 90.26 73.99

3175 500 2,778 400 104.47 85.63

3176 600 3,333 400 118.26 96.93

Page 110 of 115


ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

STP (MBBR)above 600 Cum/D and upto 2000 Cum/D Capacity

Designing (hydraulically, structurally & aesthetically), providing, constructing, hydraulic testing,


commissioning and giving satisfactory trials of STP consisting of Coarse Bar Screening Chamber
(RCC) with steel screen (manual), Receiving Sump RCC, Submersible Pumps in receiving sump,
Stilling Chamber in RCC, Fine bar Screen chamber(manual) RCC with steel screen, Oil & Grease
Remover(RCC), Grit separator, Equalization Tank( 2 Tanks of 50% Capacity each), Air Grid for
Equalization Tanks, Feed Pumps(2 No), Moving Bed Bio Reactor(s) with plastic media (of
appropriate density, size and quantity to keep very high MLSS > 15,000 mg/lit), Air Blowers for
MBBR(2 Nos), Tube Settler assembly, Sludge Pump screw type(2 Nos), Sludge dewatering
centrifuge, Sludge holding tank, Air Grid for Sludge holding, Chlorine Dozing System, Chlorine
contact tank, Foundation for all E/M equipments, associated piping work with required valves,
gates, drains, pathways, Electrical control Panel with interconnecting cable, spare parts for 2
years of operation, etc. complete as turnkey job with all involved civil, electrical, digital and
mechanical works as per detailed specifications for civil, electrical and mechanical components
with all duties and taxes complete. (Also refer imp notes below).

For tertiary treatment it also includes Filter Feed Tank of RCC, Filter Feed Pumps, Dual Media
Filter, Activated Carbon Filter, Treated water Tank in RCC. Treated sewage can also be used
for irrigation, horticulture, fire fighting and MT wash.

ITEM NO Capacity Equivalent Land Area Rate (in Lakh)


(Cum/day) population Required
Load (with (SM) with Tertiary without Tertiary
180 lpcd) Treatment Treatment
3177 700 3,889 500 127.32 107.89

3178 800 4,445 500 139.89 118.55

3179 1000 5,556 600 164.04 139.02

3180 2000 11,111 750 271.41 230.01

Page 111 of 115


ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

STP (MBBR)above 2000 Cum/D

Designing (hydraulically, structurally & aesthetically), providing, constructing, hydraulic testing,


commissioning and giving satisfactory trials of STP consisting of Coarse Bar Screening Chamber
(RCC) with steel screen (manual), Receiving Sump RCC, Submersible Pumps in receiving sump,
Stilling Chamber in RCC, Fine bar Screen chamber(manual) RCC with steel screen, Oil & Grease
Remover(RCC), Grit separator, Equalization Tank( 2 Tanks of 50% Capacity each), Air Grid for
Equalization Tanks, Feed Pumps(2 No), Moving Bed Bio Reactor(s) with plastic media (of
appropriate density, size and quantity to keep very high MLSS > 15,000 mg/lit), Air Blowers for
MBBR(2 Nos), Tube Settler assembly, Sludge Pump screw type(2 Nos), Sludge thickener
centrifuge/ drum type, Sludge holding tank, Air Grid for Sludge holding, Chlorine Dozing System,
Chlorine contact tank, Chlorinator room, Foundation for all E/M equipments, Associated piping
work with required valves, gates, drains, pathways, Electrical control Panel with interconnecting
cable, administration block cum laboratory, laboratory equipments, spare parts for 2 years of
operation, etc. complete as turnkey job with all involved civil, electrical, digital and mechanical as
per detailed specifications for civil, electrical and mechanical components with all duties and
taxes complete. (Also refer imp notes below)

For tertiary treatment it also includes Filter Feed Tank of RCC, Filter Feed Pumps, Dual Media
Filter, Activated Carbon Filter, Treated water Tank in RCC. Treated sewage can also be used
for irrigation, horticulture, fire fighting and MT wash.

ITEM NO Capacity Equivalent Land Area Rate (in Lakh)


(Cum/day) population Required
Load (with (SM) with Tertiary without Tertiary
180 lpcd) Treatment Treatment
3181 3000 16,667 900 352.82 309.50

3182 4000 22,222 1050 435.59 382.10

3183 5000 27,778 1200 512.89 449.90

3184 10000 55,556 2300 850.66 746.20

3185 20000 111,111 3900 1,406.33 1,233.62

Page 112 of 115


ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

IMP NOTES FOR SEWAGE TREATMENT PLANTS

1. Peak factor considered for design for plants upto 3 MLD is 3; upto 15 MLD is 2.5 and upto 20
MLD is 2.0.

2. Upto 2 MLD capacity STP, chlorination is done by using sodium hypochlorite solution. Above 2
MLD capacity, gas chlorinator is provided.

3. Sludge thickener is not provided upto 3 MLD capacity STP. Sludge will be collected into sludge
sump and pumped directly to sludge dewatering system.

4. All water retaining structures are in M-30 grade of concrete.

5. Water table is considered 5 m below GL for design. Dewatering if required to be priced extra.

6. Soil bearing capacity is considered as 20 T/m at 1.5 m below GL.

7. Lead for excavation is considered as 0.5 km within MD land.

8. Grade of cement used is OPC 43 grade. High Alumina Cement can also be used.

9. Grade of steel used is Fe 415.

10. Boundary wall, fencing, gate, storm water drains, approach roads, street lights, site clearance is
not considered in the scope.

11. Chemicals required during trial run and commissioning are not considered.

12. VAT has not been included in the rates.

Page 113 of 115


ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

CONCEPTUAL FLOW CHART FOR MBBR BASED STP UPTO 2 MLD

Page 114 of 115


ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

CONCEPTUAL FLOW CHART FOR MBBR BASED STP ABOVE 2 MLD

Col Rajat
Baijal
Digitally signed by Col Rajat Baijal
DN: c=IN, st=KASHMIR, o=E-IN-C
Branch Army MOD,Automation
Cell EINC, ou=nonnic-mail-admin,
PageBaijal,
cn=Col Rajat 115 of 115
email=autocell-einc-army@nic.in
Date: 2016.03.10 12:32:21 +05'30'

You might also like