You are on page 1of 4

CONSOLID 444 EU DIN SAFETY DATA SHEET (EG-No: GEM.

91/155/EWG)
Commercial Name: CONSOLID 444 Liquid Soil Stabilizer
CONSOLID 444 Final Product

Custom Tarif-No.: 3815.9099.900.Z

Main Manufacturer: CONSOLID AG CH 9467 Frmsen Switzerland (consolidag@catv.rol.ch)

Shipper : COMPACSIS IBERICA S.L


C/ Doctor Trueta, 13 local
08860 CASTELLDEFELS BARCELONA SPAIN
Email. compacsis@compacsis.com WEB PAGE : www.compacsis.com

Application Purpose: Soil Stabilisation, Soil improvement, Soil Impermeability

CHARACTERISTICS
Chemical Characteristics
Aqueous solution of a mixture of molecular interfacial active substances, solvents, emulgator
and catalysts

Amonium Content: X: R 38-41 2.5-10 %

Form: Liquid
Colour: milky white to yellow brown
Odour: IPA

PHYSICAL AND SAFETY-TECHNICAL DATA

Change in physical state: < 10C

Density : (20C) 0.980 g/cm 3

Vapour Pressure: (20C) Like water

Viscosity: (50C) Like water

Solubility in water: (40C) dsipersable/mixable %100

pH-value: (1.0 g/lt. H 2O) 5.5 6.5

pH-value: (20Cde) ca.8

Flash point: None

Ignition temperature: None

Explosion limits: None Exposive

Solubility in water: Completely Mixable

Burning Point: > 100 C

Melting Point: 0
TRANSPORTATION

Land Transport ADR/RID and GGVS/GGVE Class: ADR/RID und GGVS/GGVS/E Class

Sea Transport IMDG/GGVSee: IMDG/GGVSee-Class: -

Port Polution: None

Airway Transport: ICAO-TI und IATA-DGR: ICAO/IATA-Class

Regulations:
Hazard symbols: X

S 26: Upon contact with eyes, flush thoroughly with water and get medical attention.

S 28: Upon skin contact, wash immediately with 3% acetic acid solution, followed by plenty of
water and soap.

S 36/37/39: Wear suitable protective clothing, gloves, goggles, and eye/skin protection.

R 41: Hazard of serious eye damages.

R 38: Skin irritation

Preventive Measures, Storage and Handling

Storage: Valid for VbF Class

Storage and Handling: Specific handling and storage conditions are not necessary

Technical preventive measures:


Washing bottles with 3% and 0,5% acetic acid solutions Irrigation of bottles with clean water.

Personal preventive equipment:


Plastic gloves, goggles, face protection

Working hygiene:
Clean contaminated clothing before reuse
Fire and explosion protection:
not necessary

Waste disposal:
According to local regulations

Waste Management:
According to local regulations

Enviromental Effect: According to the EU regulations doen not direct bad effect to the environment.
Manufactured according to the EU rules
EMERGENCY MEASURES IN CASE OF ACCIDENTS AND FIRE

After spillage, leakage, gas escape:


Take up spills with sand, soil, or other inert material. Do not use sawdust. Dispose of according
to local regulations

Extinction means:
Carbon dioxide, dry chemicals, or foam. Also water, if dispersable, and if waste can be collected.

First aid:
Inhalation: Remove to fresh air. Seek medical advice, if necessary.

Skin contact: Wipe off the product and wash immediately with 3% acetic acid, followed by plenty of
water and soap. Get medical attention if symptoms arise. Product penetrates slowly; thus local
irritation may develop several hours later if it is not removed at once.

Eye contact: Wash immediately with 0.5% acetic acid and irrigate with a soft stream of water for
15 - 20 minutes. Then get medical attention.

Ingestion: Do not induce vomiting because of the risk of burns in the gullet. Drink 1 - 2 glasses
of water. Then get medical attention.

INFORMATION ON TOXICOLOGY
Inhalation may cause irritation in the respiratory tract.
Slow penetration without immediately visible signs of cauterisation.
Caution with splashes into the eyes; they might cause damages.
Hazard of cauterisation by inhalation.

Information on ecology
The product does not cause damages to the environment and is biologically decomposable.

International Norms:

VbF Classification: According to the NK Classification % 2,5


M 9485 Norms: Class Ratio
4 2,5
NK 2,5

Information on packing
Tanks for storage should consist of tin or steel, with protection lining against corrosion. Plastic
containers can be used.
No constraint during transportation

APPLICATION INSTRUCTION:
O.8 litres of Consolid 444 is applied to 1 m3 soil by weight.
MAIN APPLICATION AREAS
-Sport & Play Grounds -Residence And Car Park Construction
-Road Base & Subbase Construction -Heavy Haul Agricultural Forestry Roads
-Rural Area Roads & Highways -Brick Manufacturing
-Problematic Ground Rehabilitation & Soil Stabilisation -Pipe Lines And Channel Construction
-Underground Roads & Mining Applications -Solid Waste And Hazardous Waste Deponie
-Tube And Railway Construction -National Security Projects Construction
-Parks And Recreation Areas -Indutsrial Areas & Manufacturing Fields
-Erosion Control & Slopes & Berms -Dike And Dam Construction
-Port Construction -Artificial lakes & Pond Construction
-Air-Strips, Airport Runway & Taxiways -Helipads & FARPs
-Construction sites -Land Development
-Storage & Stock Piles -Road Port & Airport Shoulders
-Military Operations & Training Sites -Golf Course Cart Paths & Trails
-Bicycle & BMX Tracks

You might also like