You are on page 1of 2

7/3/2017 Syrup and sugar Sandvik Materials Technology

HOME MATERIALS CENTER CORROSION TABLES SYRUP AND SUGAR

SYRUP AND SUGAR


These corrosion data are mainly based on results of general corrosion laboratory tests, carried out with
pure chemicals and water solutions nearly saturated with air (the corrosion rate can be quite dierent if
the solution is free from oxygen).

All concentrations are given in weight-% and the solvent is water if nothing else is shown. The corrosion
data apply to annealed materials with normal microstructure and clean surfaces, throughout.

Symbol clarication

Syrup and sugar


Conc. % All With an addition of Cl-, 500mg/l 90
Temp. C 20-BP
Grade or type of alloy:
Carbon steel
13 Cr 0 0p
Sandvik 1802 0 0p
Sandvik 3R12 0 0p
Sandvik 3R60 0 0p
18Cr13Ni3Mo 1) 0 0p
17Cr14Ni4Mo 2) 0 0p
Sandvik 2RK65 ('904L') 0 0p
Sanicro 28 0
254 SMO 0
654 SMO 0
Sandvik SAF 2304 0
Sandvik SAF 2205 0
Sandvik SAF 2507 0
Titanium (CP Ti) 0 0
1)
ASTM 317L, e.g. Sandvik 3R64
2)
EN 1.4439, e.g. Sandvik 3R68

http://smt.sandvik.com/en/materials-center/corrosion-tables/syrup-and-sugar/ 1/2
7/3/2017 Syrup and sugar Sandvik Materials Technology

Symbol clarication
These corrosion tables use a number of symbols, having the following meanings:

Symbol Description
0 Corrosion rate less than 0.1 mm/year. The material is corrosion proof.
1 Corrosion rate 0.11.0 mm/year. The material is not corrosion proof, but useful in certain cases.
2 Corrosion rate over 1.0 mm/year. Serious corrosion. The material is not usable.
p, P Risk (severe risk) of pitting and crevice corrosion.
c, C Risk (Severe risk) of crevice corrosion. Used when there is a risk of localised corrosion only if crevices are
present. Under more severe conditions, when there is also a risk of pitting corrosion, the symbols p or P ar
instead.
s, S Risk (Severe risk) of stress corrosion cracking.
ig Risk of intergranular corrosion.
BP Boiling solution.
ND No data. (Used only where there are no actual data to estimate the risk of localised corrosion instead of p o

Disclaimer: Laboratory tests are not strictly comparable with actual service conditions. Accordingly, Sandvik makes
no warrianties, express or implied, and accept no liability, compensatory or consequential, for the performance of
dierent materials in individual applications that may be based on the information provided in this publication.

Sandvik Materials Technology is a developer and producer of advanced stainless steels, special alloys, titanium and other high-performance materials. Part
of the Sandvik Group.

Copyright Sandvik AB; (publ) SE-811 81 Sandviken, Sweden Tel +46 (0)26 260000

http://smt.sandvik.com/en/materials-center/corrosion-tables/syrup-and-sugar/ 2/2

You might also like