You are on page 1of 1

MS20253E

HINGE PIN

DIAMETER DASH NUMBER TABLE


Dash Number 1 2 3 4 5
F + .001 .062 .089 .117 .179 .129

Requirements:
Material: Corrosion resistant Steel per 00-W-23 Form 1, condition B (straightened and cut lengths)
composition FS 302, FS 304 or FS 316
Finish: cadmium Plate per 00-P-416 Type 11, Class 2 or passivate per 00-P-35
Lubrication:when specified, solid film lubricant per MIL-L-46010

Examples of Part Numbers:


MS20253 P 1 -625 L = Pin, CRES, CAD, .063 Dia., 6.250 long, solid film lubricant

"L denotes solid film lubricant.


Absence of letter denotes unlubricated.

Denotes length in hundredths of an inch

Denotes diameter dash number (see table above)

P denotes CAD. Plated.


- in place of P denotes passivated

Basic part number

AN415
COWL LOCK PIN

AN415- Wire Diameter Length

2 .080 1 + 15/16

AN416
SAFETY PIN
PART NUMBER WIRE DIA. A LENGTH B LENGTH
INCHES INCHES

AN416-1 .051 1 1/16 1 3/8

AN416-2 0.41 3/4 1 5/16

Product information and part numbers shown on these pages are not guaranteed
correct by AVIAQUIP PTY. LTD and are subject to cha nge without notice.
9

You might also like