You are on page 1of 1

BMG BELTING Code Telephone Facsimile

East London (+27 43) 722-6616 722-5626


Port Elizabeth (+27 41) 406-0550 406-0559
Durban (+27 31) 579-2033 579-2112
Richards Bay (+27 35) 789-7123 789-8491
Johannesburg (+27 11) 620-1500 620-1675
Cape Town (+27 21) 508-1600 508-1699
Nelspruit (+27 13) 752-7911 752-7888

Specification Sheet - Moulded Chevron Conveyor Belting


600mm wide 250/2 Ply 3.2 x 1.6 Grade N
Belt Specifications:
Carcass Selection 250/2 Ply Top Cover Thickness 3.20 mm
Bottom Cover Thickness 1.60 mm Cover Grade S180
Approx. Total Belt Thickness 7.20 mm Approx. Total Belt Mass 6.70 kg/m2

Carcass Requirements:
Minimum Tensile Strength 250 kN/m Carcass Fabric EP 135 kN/m
Maximum Operating Tension 25 kN/m Minimum Adhesion Between Plies 4.6 N/mm

Cover Requirements & Additional Properties:


Minimum Tensile Strength 18 MPa After Aging 80-120 % of Original
Elongation at Break 450 % Min After Aging 80-120 % of Original
Low Operating Temperature NS Max. Temp (Lumpy Materials) NS
Adhesion Between Cover and Carcass 3.5 N/mm
Shore Hardness 66 Shore

Minimum Belt Width for Troughability (Empty Belt):

600 mm 600 mm 600 mm

20 Troughing Frames 35 Troughing Frames 45 Troughing Frames

Chevron Configuration: Minimum Recommended Pulley Diameters:

250 mm

200 mm
Max. 190 Wrap

250 mm

Suitable Fasteners:

375X, 550, R2, R5 - BR, BM

Comments: NS = Not Specified


N = Not Applicable GRL/Sept/08

You might also like