You are on page 1of 299

Serial No.

Specification
fication No.

Fifth Edition

This document contains proprietary and trade secret information


and is given to the receiver in confidence. The receiver by recep-
tion and retention of the document accepts the document in confi-
dence and agrees that, except as with the prior expressed written
permission of Waukesha Engine, Dresser, Inc., it will; (1) not use
the document or any copy thereof or the confidential or trade
secret information therein; (2) not copy or reproduce the document
in whole, or in part without the prior written approval of Waukesha
Engine, Dresser, Inc.; and (3) not disclose to others either the doc-
ument or the confidential or trade secret information contained
therein.
All sales and information herein supplied subject to Standard
Terms of Sale, including limitation of liability.
WAUKESHA, DRESSER, SERIES FOUR, and WKI are registered
trademarks of Dresser, Inc. WAUKESHA ENGENIUS,
NGENIUS, ESM, VHP,
and DRESSER logo are trademarks of Dresser, Inc. All other
trademarks, service marks, logos, slogans, and trade names (col-
lectively
y marks) are the properties of their respective owners.
Dresser, Inc. disclaims any proprietary interest in these marks
owned by others.

FORM 6252
Copyright 1992,
992, 1997, 1999, 2000, 2003
Waukesha Engine
Dresser, Inc.
Waukesha, Wisconsin 53188
All rights reserved. Printed in U.S.A. 8/03
TABLE OF CONTENTS
Alphabetical Index of Parts.........................................1 Express Limited Warranty For:
Customer Ordering Procedure ...................................5 Genuine Waukesha Service Parts
Parts Catalog Information...........................................6 And Factory Remanufactured Service
Parts Illustrations and Parts Lists .....................9 271 Parts Used in a Certified Overhaul.............. W-3
Part Number Index Appendix A ........................... A-1 Genuine Waukesha Service Parts
Engine Preservation Products Appendix B.......... B-1 And Factory Remanufactured Service
Warranty Parts............................................................ W-4
Continuous Duty Applications ......................... W-1 Custom Engine Control ............................... W-5
Excess Of Continuous Duty Ratings ............... W-2

ALPHABETICAL INDEX OF PARTS

A Crankcase ....................................................... 41 43
Actuator Gas Regulator .......................................173 Breather
Air Actuator ...............................................................71 Closed GLD .................................................145
Air Cleaner Ejector Closed ................................ 147 149
G ................................................................143
G ......................................................................197
GL ..............................................................153
GL ....................................................................199
GLD Deltec ......................................... 155, 157
GLD ..................................................................201 GSID ...........................................................151
GLD Deltec.......................................................205 Open ...........................................................141
GLD Deltec/2....................................................207 Crankshaft ................................................................23
GSID ................................................................203 Pulley ...............................................................179
Air/Fuel Module Cylinder
CEC..................................................................171 Head.......................................................... 13 15
Air/Gas Liner ...................................................................21
Starter ................................................... 233 237
Starter Controls ................................................239 D
Alternator ......................................................... 79 81
Dipstick .............................................................. 25, 27
Guard ...............................................................269
Auxiliary
Rocker Arm ............................................... 67 69
E
Electric Starter ........................................................195
Water Pump .....................................................125
Engine Support .......................................................225
Water Pump Connections ................................127
Exhaust
Manifold............................................................105
B Outlet................................................................111
Barring Device ........................................................121 Turbocharged ..............................................113
Butterfly Valve Housing ..........................................163 Thermocouple ....................................... 241 243

C F
Camshaft ......................................................... 67 69 Filter
Carburetor Microspin Oil ....................................................119
F18G/GL & H24GL...........................................211 Oil .....................................................................117
F18GLD Dual Fuel ...........................................221 Flywheel ...................................................................23
G ......................................................................215 Housing ............................................................121
GL ....................................................................213 Fuel Regulator
GLD ..................................................................217 G ......................................................................253
GLD Deltec/2....................................................223 GLD ..................................................................255
GSID ................................................................219 Mounting
Connecting Rod ........................................................21 G, GL ..........................................................249
G, GSI, GL ...................................................251

FORM 6252 Fifth Edition 1


G O
Gear Housing .............................................. 107 109 Oil Cooler..................................................................31
Generator Remote ..............................................................35
Custom Engine Control ...................................... 83 Shell And Tube ........................................... 37, 39
Governor Oil Cooler Connections
Air Actuator ........................................................ 71 Naturally Aspirated .............................................33
Drive ................................................................... 99 Shell And Tube ..................................................39
Linkage .............................................................. 93 Oil Filter ..................................................................117
Oil Supply ........................................................... 91 Microspin ..........................................................119
Woodward 4024 Actuator .................................. 89 Oil Level Regulator ........................................ 181, 183
Woodward EG3P Actuator ................................. 87 Oil Pan ......................................................................25
Woodward PSG And SG .................................... 85 Oil Pump ...................................................... 167 169
Guard Overspeed Shutdown .............................................245
Alternator .........................................................269
High Capacity Oil Pan Vibration Damper .........231 P
Vibration Damper .................................... 227, 229 Piston........................................................................21
Prelube Pump .........................................................133
H Controls ............................................................139
Hall Effect Pickup With Heater ........................................... 135 137
Custom Engine Control ......................... 47, 53, 63 Push Rod ..................................................................67
Heat Shields
Turbocharger ...................................................185 R
Heater Regulator
Jacket Water ......................................... 261 267 Fuel
High Capacity Oil Pan .............................................. 27 G ................................................................253
GLD ............................................................255
I Regulator Mounting
Idler Gear Fuel
Intermediate ....................................................... 29 G, GL ..........................................................249
Water Pump ....................................................... 29 G, GL, GSI...................................................251
Ignition Rocker Arm...............................................................17
Custom Engine Control ..............47 49, 63 65 Cover .................................................................19
CSA Approved ...................................... 51 53
Custom Engine Control Junction Box S
CSA Approved ............................................... 55 Shutdown System...................................................209
Magneto ............................................................. 57 Starter
CSA Approved ............................................... 59 Air/Gas .................................................... 233, 237
Instrument Panel ......................................... 187 189 Electric .............................................................195
Intake Manifold ............................................ 101 103 Stub Shaft ...................................................... 257, 259
Intercooler.................................................................95 Surge Tank .............................................................247
Connections ....................................................... 97
T
J Thermocouple
Jacket Water Exhaust ............................................................241
Heater ................................................... 261 267 Thermostat ...............................................................45
Pump ................................................................123 Thermostat Housing
Water Outlet .......................................................45
K Throttle Control .......................................................191
Knock Detection Module (KDM) .............................271 PSG And SG Governor ....................................193
Turbocharger
L And Connections ....................................... 73 77
Lifting Device ..........................................................115 Guards .............................................................185

M
Magneto Drive ........................................................131
Microspin Oil Filter ..................................................119

2 FORM 6252 Fifth Edition


V
Vibration Damper ......................................................23
Vibration Damper Guard .........................................231
F18 ...................................................................227
F18, H24 ..........................................................229

W
Warnings And Cautions ..................................... 9 11
Wastegate ................................................... 175 177
Water
Header .............................................................165
Heater ................................................... 261 267
Inlet ..................................................................129
Outlet
Thermostat ....................................................45
Pump
Jacket .........................................................123

FORM 6252 Fifth Edition 3


NOTES

4 FORM 6252 Fifth Edition


CUSTOMER ORDERING PROCEDURE 4. Always include the part number, when known,
along with the description of the part. State the quantity
1. Waukesha genuine parts are available worldwide of the part you wish to order. Do not use the word
and must be ordered through your local Waukesha Dis- complete or designate the quantity by sets.
tributor.
EXAMPLE: 168660filter element(1) Ordered.
NOTE: Part numbers in this catalog are for reference
only and should not be used for ordering parts. Your NOTE: Quantities listed in this catalog are quantity per
Waukesha Distributor will refer to your engine engine.
specification to make certain you receive the correct 5. If a special part is needed, the engine application
parts for your engine. should also be stated.
2. Top level assembly numbers may not all be avail- 6. Anticipate your parts requirements:
able as service parts.
Order parts early in the day.
3. Always specify to your Waukesha Distributor the
engine model designation, specification number, and Keep a supply of normal maintenance parts in stock.
serial number as found stamped on the engine name- Obtain a parts stocking recommendation from your
plate (see Figure 1). local Waukesha Distributor.

Figure 1. Typical F18/H24 Nameplate

FORM 6252 Fifth Edition 5


PARTS CATALOG INFORMATION Part Number And Description

PARTS CATALOG FORMAT The second column lists the part numbers. The last
column lists the description of the part. Parts included
Illustration Number in assemblies are preceded by one dot and parts
002.00 included in subassemblies are preceded by two or
three dots.
A BC
Engine Model Quantity
The columns headed by engine model numbers list the
A) Group Number. quantity of the part per engine except when parts are
B) For each different illustration in the same group this listed more than once in the catalog. The quantity per
number advances by 1. engine is the total of the quantities listed individually on
separate pages.
C) For each repeated illustration this number advances
by 1. Extent Of Parts Catalog Coverage

Item No. This catalog contains only standard or selected option


parts. Variations of these parts as well as other parts
The first column lists the item numbers which corre- are not included. Contact your local Waukesha Distrib-
spond to the item numbers in the illustration. utor for assistance in identifying parts not included in
this catalog.
EXAMPLE:

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GL GLD G GSID GL GLD
GROUP 55
A304130 1 1 1 1 1 1 1 1 SUPPORT, Oil Filter-Assembly
1 304130 1 1 1 1 1 1 1 1 SUPPORT, Oil Filter
2 304131 3 3 3 3 3 3 3 3 CONNECTION, Oil Filter
A304193 1 1 1 1 1 1 1 1 VALVE, Piston Cooling-Assembly
3 304193 1 1 1 1 1 1 1 1 BODY, Valve, Piston Cooling
4 304194 1 1 1 1 1 1 1 1 SPRING, Valve, Piston Cooling
5 304133 1 1 1 1 1 1 1 1 PISTON, Cooling Valve
6 304760 1 1 1 1 1 1 1 1 O-RING
7 293237 2 2 2 2 2 2 2 2 STUD, M10 x 37 mm
8 295825 2 2 2 2 2 2 2 2 NUT, Hex, M10, Grade 10
9 294931 2 2 2 2 2 2 2 2 O-RING, Support to Crankcase, End
10 304196 1 1 1 1 1 1 1 1 O-RING, Support to Crankcase
11 290393 4 4 4 4 4 4 4 4 SCREW, Hex Head, M10 x 25 mm
12 304126 3 3 3 3 3 3 3 3 FILTER, Oil
13 305197B 1 1 1 1 1 1 1 1 GASKET, Copper Washer
14 304779 1 1 1 1 1 1 1 1 PLUG, Hex Head, 1/4"
15 304897A 1 1 1 1 1 1 1 1 PLUG, Hex Socket Head, M36 x 1.5 mm

6 FORM 6252 Fifth Edition


NOTES

FORM 6252 Fifth Edition 7


W
A 4
5

U
K
3
1

E
S 2

H
A

8 FORM 6252 Fifth Edition


WARNINGS AND CAUTIONS

ITEM PART F18 H24


NO. NUMBER DESCRIPTION
G GSID GL GLD G GSID GL GLD

1 211930A 1 1 1 1 1 1 1 1 LABEL, Safety-Lifting Instructions


2 211910L 1 1 1 1 1 1 1 1 LABEL, Warning-Safety Guards
3 305885 1 1 1 1 1 1 PLATE, Label
4 211930C 1 1 1 1 1 1 1 1 LABEL, Safety-Lifting Instructions
5 211910K 1 1 1 1 1 1 1 1 LABEL, Warning-Safety Guards
6 211900B 1 1 LABEL, Danger-Gas Shutoff
(Deltec Carburetor Only)
Continued

FORM 6252 Fifth Edition 9


W
7

A
U
K
E
S
H
A
10 9
11
8

15
14
7
11

12

13

10 FORM 6252 Fifth Edition


WARNINGS AND CAUTIONS

ITEM PART F18 H24


NO. NUMBER DESCRIPTION
G GSID GL GLD G GSID GL GLD

7 211920E 1 2 2 2 1 2 2 2 LABEL, Caution-Hot Surface


8 211900 1 1 1 1 1 1 1 1 LABEL, Danger-Electrical Source,
Jacket Water Heater
9 211910N 2 1 2 3 2 1 2 3 LABEL, Warning-Maximum Gas Regulator
Pressure
10 211910T 1 1 1 1 1 1 1 1 LABEL, Warning-Maximum Starter Pressure
11 211910W 2 2 2 2 2 2 2 2 LABEL, Warning-Gas Venting
(Air/Gas Starter)
12 211911B 1 1 1 1 1 1 1 1 TAG, Warning-No Protection Devices
13 211911J 1 1 1 1 1 1 1 1 LABEL, Warning-Barring Device
14 211920B 1 1 1 1 1 1 1 1 LABEL, Caution-Ear/Eye Protection
15 305884 1 1 1 1 1 1 1 1 BRACKET, Label

FORM 6252 Fifth Edition 11


002.00

W
14

15

A 16

U 13 17

K
E
18

S
12
4

H 2

A
11
19

1
6

10

21 20

12 FORM 6252 Fifth Edition


002.00
CYLINDER HEAD

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 2
AD300302C 6 6 6 8 8 8 HEAD, Cylinder-Assembly
CD300302C 6 8 HEAD, Cylinder-Assembly (Previous)
CF300302C 6 6 8 8 HEAD, Cylinder-Assembly (Current)
AA300302D 6 8 HEAD, Cylinder-Assembly GLD/2
AE300302C 6 6 8 8 HEAD, Cylinder-Assembly LCR and HCR
CF300302C 6 6 8 8 HEAD, Cylinder-Assembly
D300302C 6 6 6 6 8 8 8 8 HEAD, Cylinder-Assembly
A300302D 6 8 HEAD, Cylinder-Assembly GLD/2
E300302C 6 6 8 8 HEAD, Cylinder-Assembly
F300302C 6 6 8 8 HEAD, Cylinder-Assembly
1 300302C 6 6 6 6 6 8 8 6 8 8 HEAD, Cylinder
300302D 6 8 HEAD, Cylinder GLD/2
2 306024 12 12 12 12 12 16 16 16 16 16 PLUG, Expander, M7
306024A 12 12 12 12 12 16 16 16 16 16 PLUG, Expander, M8, For Service Use
3 305480 24 24 24 24 24 32 32 32 32 32 STUD, M10 x 52 mm
4 300009 24 24 32 32 GUIDE, Valve
300009E 24 24 32 32 GUIDE, Valve
300009C 24 24 24 24 32 32 32 32 GUIDE, Valve GLD/2, LCR and HCR
5 304070 54 54 54 54 54 72 72 72 72 72 PLUG, Cup, M32
6 304070A 18 18 18 18 18 24 24 24 24 24 PLUG, Cup, M22
7 304071 24 24 24 24 24 32 32 32 32 32 PLUG, Cup, M12
8 304016 12 12 12 12 12 16 16 16 16 16 GUIDE, Valve-Crosshead
9 305696 6 6 6 6 6 8 8 8 8 8 JET, Water, Cylinder Head
10 304010L 24 24 24 24 24 32 32 32 32 32 INSERT, Valve Seat-Intake and Exhaust
11 305475B 6 6 6 6 6 8 8 8 8 8 WASHER, Steel, Not Used With P/N 305003K
12 305003J 6 6 6 6 6 8 8 8 8 8 HOLDER, Spark Plug
305003K 6 8 HOLDER, Spark Plug GLD/2
13 305882 12 12 12 12 12 16 16 16 16 16 O-RING (Highly Saturated Nitrile)
14 304013 48 48 48 48 48 64 64 64 64 64 LOCK, Valve Split
304013A 48 64 LOCK, Valve Split GLD/2
15 304014 24 24 32 32 RETAINER, Valve Spring
304014A 24 24 24 32 32 32 RETAINER, Valve Spring
16 300135A 24 24 24 24 24 32 32 32 32 32 SPRING, Valve, Inside
17 300035A 24 24 24 24 24 32 32 32 32 32 SPRING, Valve, Outside
18 304015 24 24 32 32 SEAL, Valve Stem
304015F 24 12 32 16 SEAL, Valve Stem
304015B 24 24 32 32 SEAL, Valve Stem, Exhaust, Black
GLD/2, LCR and HCR, requires P/N 300009C
304015C 24 12 24 24 32 16 32 32 SEAL, Valve Stem, Intake, Blue
GLD/2, LCR and HCR, requires P/N 300009C
19 304011 24 24 24 24 24 32 32 32 32 32 CUP, Lower-Fixed
20 300036K 12 12 12 24 24 16 16 16 32 32 VALVE, Intake and Exhaust 20,
Polished Chrome Stem
21 300036J 12 16 VALVE, Exhaust 20, Coated Stem
300036M 12 12 16 16 VALVE, Exhaust (Pyromet)
Continued

FORM 6252 Fifth Edition 13


002.01

W
A
U
K 26

E
S
H 26

A
27

25

22
24

23

14 FORM 6252 Fifth Edition


002.01
CYLINDER HEAD

F18 H24
ITEM PART
NO. NUMBER DESCRIPTION
G GSID GSI GL GLD G GSID GSI GL GLD
22 300000D 6 6 6 6 6 8 8 8 8 8 GASKET, Cylinder Head
23 300000B 6 6 6 6 6 8 8 8 8 8 GASKET, Cylinder Head, Use only with
cylinder heads equipped with P/N 304010K
Valve Seat Insert
24 304721 6 6 6 6 6 8 8 8 8 8 O-RING, Cylinder Head, Use only with
P/N 300000B Gasket and P/N 304391
Bushing
25 304391 6 6 6 6 6 8 8 8 8 8 BUSHING, Oil, Use only with P/N 300000B
Gasket
26 304020 36 36 36 36 36 48 48 48 48 48 NUT, Cylinder Head
305948A 36 36 36 36 36 48 48 48 48 48 CAPSCREW, Cylinder Head
27 304021 36 36 36 36 36 48 48 48 48 48 WASHER, Stud, Cylinder Head
304021B 36 36 36 36 36 48 48 48 48 48 WASHER, Stud, Cylinder Head GLD/2
SERVICE REPAIR KITS
G-977-67 6 6 6 6 6 8 8 8 8 8 Gasket Kit, Cylinder Head, Single, With
P/N 300000D Head Gasket
G-979-288 1 1 1 1 1 Gasket Kit, Valve Overhaul , With
P/N 300000D Head Gasket
G-979-289 1 1 1 1 1 Gasket Kit, Valve Overhaul, With
P/N 300000D Head Gasket
G-977-60 6 6 6 6 6 8 8 8 8 8 Gasket Kit, Cylinder Head, Single, With
P/N 300000B Head Gasket
G-979-276 1 1 1 1 1 Gasket Kit, Valve Overhaul, With
P/N 300000B Head Gasket
G-979-278 1 1 1 1 1 Gasket Kit, Valve Overhaul, With
P/N 300000B Head Gasket

FORM 6252 Fifth Edition 15


002.10

W
A
U
K
E
S
H
A 20
7
3
4

19

8
13
10
1
11

12 9

15

14
16
17

18

16 FORM 6252 Fifth Edition


002.10
ROCKER ARM COVER ROCKER ARM
GROUPS 2, 39
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 2
FA300068 6 6 6 6 8 8 8 8 SUPPORT, Rocker Arm-Assembly
GA300068 6 8 SUPPORT, Rocker Arm-Assembly GLD/2
HA300068 6 6 8 8 SUPPORT, Rocker Arm-Assembly
A300068 6 6 6 6 6 8 8 8 8 8 SUPPORT, Rocker Arm-Assembly
1 300068 6 6 6 6 6 8 8 8 8 8 SUPPORT, Rocker Arm
2 304044 6 6 6 6 6 8 8 8 8 8 PIN, Rocker Arm Support
CA300065C 6 6 6 6 6 8 8 8 8 8 ARM, Rocker-Assembly (Intake)
DA300065C 6 8 ARM, Rocker-Assembly (Intake) GLD/2
AA300065D 6 6 8 8 ARM, Rocker-Assembly (Intake)
A300065C 6 6 6 6 6 8 8 8 8 8 ARM, Rocker-Assembly (Intake)
A300065D 6 6 8 8 ARM, Rocker-Assembly (Intake)
3 300065C 6 6 6 6 8 8 8 8 ARM, Rocker (Intake)
300065D 6 6 6 6 6 8 8 8 8 8 ARM, Rocker (Intake)
4 300048C 6 6 6 6 8 8 8 8 BEARING, Rocker Arm
300048D 6 6 8 8 BEARING, Rocker Arm
5 305484 6 6 6 6 6 8 8 8 8 8 SCREW, Set, M5
306095 6 8 SCREW, Set, M6 GLD/2
6 304040A 6 6 6 6 6 8 8 8 8 8 SOCKET, Ball
7 304045 6 6 6 6 6 8 8 8 8 8 NUT, Socket Ball
8 305718A 6 6 6 6 6 8 8 8 8 8 PIN, Spring
306135 6 8 PIN, Spring GLD/2
CA300066C 6 6 6 6 6 8 8 8 8 8 ARM, Rocker-Assembly (Exhaust)
DA300066C 6 8 ARM, Rocker-Assembly (Exhaust) GLD/2
AA300066D 6 6 8 8 ARM, Rocker-Assembly (Exhaust)
A300066C 6 6 6 6 6 8 8 8 8 8 ARM, Rocker-Assembly (Exhaust)
A300066D 6 6 8 8 ARM, Rocker-Assembly (Exhaust)
9 300066C 6 6 6 6 8 8 8 8 ARM, Rocker (Exhaust)
300066D 6 6 8 8 ARM, Rocker (Exhaust)
10 300048C 6 6 6 6 6 8 8 8 8 8 BEARING, Rocker Arm
300048D 6 6 8 8 BEARING, Rocker Arm
11 305484 6 6 6 6 6 8 8 8 8 8 SCREW, Set, M5
306095 6 8 SCREW, Set, M6 GLD/2
12 304040A 6 6 6 6 6 8 8 8 8 8 SOCKET, Ball
13 304045 6 6 6 6 6 8 8 8 8 8 NUT, Socket Ball
14 305718A 6 6 6 6 6 8 8 8 8 8 PIN, Spring
306135A 6 8 PIN, Spring GLD/2
A300069 6 6 6 6 6 8 8 8 8 8 SHAFT, Rocker Arm-Assembly
15 300069 6 6 6 6 6 8 8 8 8 8 SHAFT, Rocker Arm
16 304071 6 6 6 6 6 8 8 8 8 8 PLUG, Cup, M12
17 304043 6 6 6 6 6 8 8 8 8 8 WASHER, Rocker Arm
18 290302 6 6 6 6 6 8 8 8 8 8 RING, Retaining, M32
19 291677 12 12 12 12 12 16 16 16 16 16 SCREW, Hex Head, M10 x 35 mm
305728 12 16 SCREW, Hex Head, M10 x 35 mm,
Grade 10.9 GLD/2
20 290329 12 12 12 12 12 16 16 16 16 16 SCREW, Hex Head, M10 x 110 mm
Continued

FORM 6252 Fifth Edition 17


002.11

W 31

A 30

U
K 33

E
S
34

H
A 32

25

28

26

29

22

24

27

27

23
21

18 FORM 6252 Fifth Edition


002.11
ROCKER ARM COVER ROCKER ARM
GROUPS 2, 39
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 2 (CONTINUED)
A304003B 12 12 12 12 12 16 16 16 16 16 CROSS, Bar-Assembly
AA304003A 12 12 CROSS, Bar-Assembly GLD/2 Only
A304003B 12 12 12 12 12 16 16 16 16 16 CROSS, Bar-Assembly
A304003A 12 16 CROSS, Bar-Assembly GLD/2 Only
21 304003B 12 12 12 12 12 16 16 16 16 16 CROSS, Bar
304003A 12 16 CROSS, Bar GLD/2 Only
22 304004 12 12 12 12 12 16 16 16 16 16 SEAT, Cross Bar
23 304005 12 12 12 12 12 16 16 16 16 16 SCREW, Adjusting
24 304057 12 12 12 12 12 16 16 16 16 16 NUT, Valve Adjusting
25 304745P 6 6 6 6 6 8 8 8 8 8 O-RING, Tube to Rocker Cover
26 305002E 6 6 6 6 6 8 8 8 8 8 TUBE, Rocker Arm Cover Recess
27 305621 6 6 6 6 6 8 8 8 8 8 O-RING, Tube to Plug Holder
28 209992G 6 6 6 6 6 8 8 8 8 8 O-RING, Tube to Rocker Cover, Use with
Flange Mounted Shielded Coils
29 305002F 6 6 6 6 6 8 8 8 8 8 TUBE, Rocker Arm Cover Recess, Use with
Flange Mounted Shielded Coils
GROUP 39
30 300139D 6 6 6 6 6 8 8 8 8 8 COVER, Rocker Arm
31 300139F 6 6 6 6 6 8 8 8 8 8 COVER, Rocker Arm Use with Flange
Mounted Shielded Coils
32 304745L 6 6 6 6 6 8 8 8 8 8 O-RING, Rocker Arm Cover
33 290039 24 24 24 24 24 32 32 32 32 32 NUT, Hex Head, M10, Grade 10
34 350450 24 24 24 24 24 32 32 32 32 32 WASHER, Flat, M10

FORM 6252 Fifth Edition 19


004.00

W
A 4

U
12

K 5

E
S
6

H
A
1
13

14

10 15
8

11

20 FORM 6252 Fifth Edition


004.00
PISTON, CONNECTING ROD AND CYLINDER LINER
GROUPS 4, 7, 30
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 4
1 300304K 6 6 6 8 8 8 PISTON, 11:1 Compression Ratio
300404K 6 6 8 8 PISTON, 8.6:1 Compression Ratio
300404C 6 8 PISTON, 8.7:1 Compression Ratio
2 300006A 6 6 6 6 6 8 8 8 8 8 PIN, Retaining
3 294925 12 12 12 12 12 16 16 16 16 16 RING, Retaining
4 300805 6 6 6 6 8 8 8 8 RING, Piston-Compression (Top)
300805G 6 6 8 8 RING, Piston-Compression (Top) P/N 300404K
5 300605 6 6 6 8 8 8 RING, Piston-Compression (Middle)
300605A 6 6 8 8 RING, Piston-Compression (Middle) LCR Only
300605C 6 6 8 8 RING, Piston-Compression (Middle)
6 300705 6 6 6 6 6 8 8 6 8 8 RING, Piston-Oil (Bottom)
GROUP 7
A300007E 6 6 6 6 6 8 8 8 8 8 ROD, Connecting-Assembly
A300007C 6 8 ROD, Connecting-Assembly GLD/2 Only
7 300007E 6 6 6 6 6 8 8 8 8 8 ROD, Connecting
305210 6 6 6 6 6 8 8 8 8 8 CAP, Connecting Rod
8 304075 12 12 12 12 12 16 16 16 16 16 PIN, Parallel
9 304055B 12 12 12 12 12 16 16 16 16 16 BOLT, Connecting Rod
304055A 12 16 BOLT, Connecting Rod GLD/2 Only
10 300108 6 6 6 6 6 8 8 8 8 8 BUSHING, Piston Pin
11 A300110G 6 6 6 6 6 8 8 8 8 8 BEARING, Connecting Rod-Assembly
A300110G2 6 6 6 6 6 8 8 8 8 8 BEARING, (0.020" Oversized)
Connecting Rod-Assembly
GROUP 30
A300030E 6 6 6 6 8 8 8 8 LINER, Cylinder-Assembly
A300030G 6 8 LINER, Cylinder-Assembly GLD/2 Only
A300030N 6 6 8 8 LINER, Cylinder-Assembly
12 300030E 6 6 6 8 8 8 LINER, Cylinder
300030G 6 8 LINER, Cylinder GLD/2 Only
300030N 6 6 8 8 LINER, Cylinder
13 211670 6 6 6 6 6 8 8 8 8 8 O-RING, Seal, Square Cut
14 304024A 12 12 12 12 12 16 16 16 16 16 O-RING, Cylinder Liner (Top and Middle)
15 304025A 6 6 6 6 6 8 8 8 8 8 O-RING, Cylinder Liner (Bottom)
SERVICE REPAIR KITS
G-907-230 6 6 6 8 8 8 Single Piston Ring Kit
(Includes Items 4 6)
G-907-240 6 6 8 8 Single Piston Ring Kit (LCR Only)
(Includes Items 4 6)
G-932-264 6 6 6 8 8 8 Single Cylinder Liner
(Includes Items 1 6, 12 15)
G-932-279 6 6 8 8 Single Cylinder Liner (LCR Only)
(Includes Items 1 6, 12 15)

FORM 6252 Fifth Edition 21


011.00

W 10
14

A
U
11

K
13

12

E
S
H
A
15

16

1
6

15

16

3
2
9

5 4
8

19
18

20

17

22 FORM 6252 Fifth Edition


011.00
CRANKSHAFT
GROUPS 11, 13, 20, 94
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 11
D300111 1 1 1 1 1 CRANKSHAFT-Assembly
(Includes Counterweight Assembly)
E301111 1 1 1 1 1 CRANKSHAFT-Assembly
(Includes Counterweight Assembly)
1 300111 1 1 1 1 1 CRANKSHAFT
301111 1 1 1 1 1 CRANKSHAFT
A304825D 12 12 12 12 12 16 16 16 16 16 COUNTERWEIGHT-Crankshaft Assembly
2 304825D 12 12 12 12 12 16 16 16 16 16 COUNTERWEIGHT, Crankshaft
3 293352 12 12 12 12 12 16 16 16 16 16 PIN, Dowel, 8 mm x 24 mm
4 304051 24 24 24 24 24 32 32 32 32 32 BOLT, Counterweight
5 304052B 24 24 24 24 24 32 32 32 32 32 WASHER, Counterweight Bolt
6 304074B 6 6 6 6 6 8 8 8 8 8 PLUG, Hex Socket Head
7 301012B 1 1 1 1 1 1 1 1 1 1 GEAR, Crankshaft
8 304823B 1 1 1 1 1 1 1 1 1 1 SEAL, Crankshaft (Front)
9 304082 1 1 1 1 1 1 1 1 1 1 PIN, Roll, 6 mm x 20 mm
GROUP 13
A300213C 1 1 1 1 1 1 1 1 1 1 FLYWHEEL-Assembly
A300213A 1 1 1 1 1 1 1 1 1 1 FLYWHEEL-Assembly, Metric
10 300213C 1 1 1 1 1 1 1 1 1 1 FLYWHEEL
300213A 1 1 1 1 1 1 1 1 1 1 FLYWHEEL, Metric
11 701696 1 1 1 1 1 1 1 1 1 1 GEAR, Ring
12 B367 8 8 8 8 8 8 8 8 8 8 WASHER, Hardened
13 304056B 8 8 8 8 8 8 8 8 8 8 BOLT, Flywheel, M16, Grade 10.9
14 211638 1 1 1 1 1 1 1 1 1 1 STRIP, Timing, Flywheel
GROUP 20
15 A300225F 7 7 7 7 7 9 9 9 9 9 BEARING, Main-Assembly
16 A304001 2 2 2 2 2 2 2 2 2 2 WASHER, Thrust-Assembly
GROUP 94
17 304060A 1 1 1 1 1 DAMPER, Vibration
304889B 1 1 1 1 1 DAMPER, Vibration
18 295402 12 12 12 12 12 12 12 12 12 12 SCREW, Socket, M12 x 35 mm, Grade 12.9
19 304868A 1 1 1 1 1 1 1 1 1 1 FLANGE, Damper Driving
304868D 1 1 FLANGE, Damper Driving GLD/2
20 304888 12 12 12 12 12 12 12 12 12 12 SCREW, Socket, M12 x 100 mm, Grade 12.9
SERVICE REPAIR KITS
G-911-16 1 1 1 1 1 CRANKSHAFT BEARING KIT (Includes Items
1, 15 & 16, and Item 11 of Group 004.00 on
page 21)
G-918-318 1 1 1 1 1 MAIN BEARING KIT (Includes Items 15 & 16)
G-918-320 1 1 1 1 1 MAIN BEARING KIT (Includes Items 15 & 16)
G-918-340 1 1 1 1 1 MAIN BEARING KIT (Includes Items 15 & 16
and 0.020" oversize main bearing)
G-918-341 1 1 1 1 1 MAIN BEARING KIT (Includes Items 15 & 16
and 0.020" oversize main bearing)

FORM 6252 Fifth Edition 23


014.00

W
A
U
K
2

E
S
H
A

6
5
4

24 FORM 6252 Fifth Edition


014.00
OIL PAN
GROUPS 3, 14
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GL GLD G GSID GL GLD
GROUP 3
1 304150D 1 1 1 1 1 1 1 1 DIPSTICK
GROUP 14
2 305845B 1 1 1 1 GASKET, Oil Pan
305845C 1 1 1 1 GASKET, Oil Pan
3 300114F 1 1 1 1 PAN, Oil, (LH Dipstick)
301014G 1 1 1 1 PAN, Oil, (LH Dipstick)
301014F 1 1 1 1 PAN, Oil, (RH Dipstick)
4 295117 6 6 6 6 6 6 6 6 SCREW, Socket Head, M10 x 70 mm
5 28697 1 1 1 1 1 1 1 1 PLUG, Pipe, Square Head, 1"
6 290478 44 44 44 44 56 56 56 56 SCREW, Hex Head, M10 x 40 mm
7 78282F 1 1 1 1 1 1 1 1 PLUG, Pipe, Square Head, 3/4"
SERVICE REPAIR KITS
G-978-31 1 1 1 1 Gasket Kit, Oil Pan
G-978-32 1 1 1 1 Gasket Kit, Oil Pan

FORM 6252 Fifth Edition 25


014.10

W 2

A
U
K
4

E
S
H
A 3

1 5
6 21
11
7

20
8 19
1

15
22
11
9 9
17

15
15 12

12 10 13
9
18 14

16 15
11

26 FORM 6252 Fifth Edition


014.10
HIGH CAPACITY OIL PAN
GROUPS 3, 14
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 3
1 304150D 2 2 2 2 2 2 2 2 2 2 DIPSTICK
GROUP 14
2 305845B 1 1 1 1 1 GASKET, Oil Pan
3 305845C 1 1 1 1 1 GASKET, Oil Pan
4 A307087 1 1 1 1 1 PAN, Oil, Assembly
5 A307002 1 1 1 1 1 PAN, Oil, Assembly
6 293314 4 4 4 4 4 4 4 4 4 4 SCREW, Socket Head, M20 x 60 mm
7 293315 4 4 4 4 4 4 4 4 4 4 NUT, Hex, M20
8 E200224 2 2 2 2 2 4 4 4 4 4 DOOR, Oil Pan, Assembly
9 290021 11 11 11 11 11 11 11 11 11 11 STUD, M10 x 30 mm
10 304707B 2 2 2 2 2 2 2 2 2 2 O-RING, Cam Door
11 291111 60 60 60 60 60 72 72 72 72 72 WASHER, Lock, M10
12 290039 22 22 22 22 22 22 22 22 22 22 NUT, Hex, M10
13 304700E 2 2 2 2 2 2 2 2 2 2 COVER, Camshaft Access
14 307093 6 6 6 6 6 6 6 6 6 6 SCREW, Socket Head, M10 x 30 mm, Grade 12.9
15 293237 11 11 11 11 11 11 11 11 11 11 STUD, M10 x 25 mm
16 307030 1 1 1 1 1 1 1 1 1 1 GASKET, Oil Pan Door
17 307070 1 1 1 1 1 1 1 1 1 1 DOOR, Oil Pan
18 78282G 2 2 2 2 2 2 2 2 2 2 PLUG, Pipe, Square Head, 1"
19 307094 38 38 38 38 38 50 50 50 50 50 SCREW, Hex Head, M10 x 35, Grade 12.9
20 307095 6 6 6 6 6 6 6 6 6 6 SCREW, Socket Head, M10 x 100 mm, Grade 12.9
21 C200224A 2 2 2 2 2 2 2 2 2 2 DOOR, Oil Pan, Assembly
22 28677 2 2 2 2 2 2 2 2 2 2 PLUG, Pipe, Hex Head, 1"

FORM 6252 Fifth Edition 27


015.00

W
20

18

A
U
19

20

K
E
12
13

S 7
10

H 11

A
12

15

8
16

14

17 1
2

28 FORM 6252 Fifth Edition


015.00
INTERMEDIATE IDLER GEAR, WATER PUMP IDLER GEAR

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 15
A301015C 1 1 1 1 1 1 1 1 1 1 GEAR, Intermediate-Assembly
1 301015C 1 1 1 1 1 1 1 1 1 1 GEAR, Intermediate
2 305086A 1 1 1 1 1 1 1 1 1 1 BUSHING, Intermediate Gear
3 301116 1 1 1 1 1 1 1 1 1 1 HUB, Intermediate Gear
4 290164 6 6 6 6 6 6 6 6 6 6 SCREW, Socket Head, M10 x 25 mm
5 304832 1 1 1 1 1 1 1 1 1 1 RETAINER, Gear Hub
6 291102 3 3 3 3 3 3 3 3 3 3 SCREW, Hex Head, M8 x 20 mm
AA305132 1 1 1 1 1 1 1 1 1 1 HOUSING, Water Pump Idler-Assembly
7 305132 1 1 1 1 1 1 1 1 1 1 HOUSING, Water Pump Idler
8 304831 1 1 1 1 1 1 1 1 1 1 BUSHING, Idler Gear Housing
9 305133A 1 1 1 1 1 1 1 1 1 1 SHAFT, Water Pump Idler
10 305135 1 1 1 1 1 1 1 1 1 1 COVER, Water Pump Idler
11 305136A 1 1 1 1 1 1 1 1 1 1 GASKET, Water Pump Inlet
12 WS809173 9 9 9 9 9 9 9 9 9 9 SCREW, Hex Head, M8 x 18 mm
13 304832B 1 1 1 1 1 1 1 1 1 1 RETAINER, Gear Hub
14 305704 1 1 1 1 1 1 1 1 1 1 O-RING, Viton
15 290679 6 6 6 6 6 6 6 6 6 6 SCREW, Hex Head, M10 x 30 mm
16 301026D 1 1 1 1 1 1 1 1 1 1 GEAR, Camshaft
17 WS241775 6 6 6 6 6 6 6 6 6 6 SCREW, Hex Head, M10 x 30 mm
18 304169A 1 1 1 1 1 1 1 1 1 1 TUBE, Oil Supply
19 304233 1 1 1 1 1 1 1 1 1 1 BUSHING, Reducing
20 305157 2 2 2 2 2 2 2 2 2 2 ELBOW, Banjo
(Includes Bolt with Metal Packing Ring)

FORM 6252 Fifth Edition 29


017.00

W
A
U
K
9
2 8

E 12

S 7
6

H 3

A 4

20

13

15
15 19

10 18

1
16
11
14
5

17

30 FORM 6252 Fifth Edition


017.00
OIL COOLER

F18 H24
ITEM PART
NO. NUMBER GSI DESCRIPTION
G GSID GSI GL GLD G D GSI GL GLD
GROUP 17
A304120B 1 1 1 1 1 1 1 1 1 1 COOLER, Oil-Assembly
1 304120B 1 1 1 1 1 1 1 1 1 1 BODY, Oil Cooler
2 304898 1 1 1 1 1 1 1 1 1 1 COVER, Oil Cooler
3 304122 1 1 1 1 1 1 1 1 1 1 GASKET, Oil Cooler
4 304124 2 2 2 2 2 2 2 2 2 2 PLATE, Oil Cooler Stack
5 294916 22 22 22 22 22 22 22 22 22 22 SCREW, Socket Head, M8 x 25 mm
6 294931 4 4 4 4 4 4 4 4 4 4 O-RING, 1.19" x 1.44" x 0.12", Viton
7 304084 8 8 8 8 8 8 8 8 8 8 STUD, M8 x 20 mm
8 304739 8 8 8 8 8 8 8 8 8 8 GASKET, Copper Washer
9 304085 8 8 8 8 8 8 8 8 8 8 NUT, Acorn, M8
10 305197C 1 1 1 1 1 1 1 1 1 1 GASKET, Copper Washer
11 304123 1 1 1 1 1 1 1 1 1 1 PLUG, Drain, M18
12 304897 2 2 2 2 2 2 2 2 2 2 PLUG, M24
13 304893 1 1 1 1 1 1 1 1 1 1 SUPPORT, Oil Cooler
14 305612A 1 1 1 1 1 1 1 1 1 1 ELBOW, Block Oil Outlet
305612B 1 1 1 1 1 1 1 1 1 1 ELBOW, Block Oil Outlet, With 1/2" NPT Hole,
Use with Microspin Centrifuge
15 304760 2 2 2 2 2 2 2 2 2 2 O-RING, M41 x 3 mm, Viton
16 26750 1 1 1 1 1 1 1 1 1 1 PLUG, Pipe, Hex Head-Steel, 1/4"
17 294944 3 3 3 3 3 3 3 3 3 3 SCREW, Hex Head, M10 x 75 mm
18 304743 1 1 1 1 1 1 1 1 1 1 GASKET, Copper
19 290393 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 25 mm
20 78282C 1 1 1 1 1 1 1 1 1 1 PLUG, Pipe, Square Head, 1/4"

FORM 6252 Fifth Edition 31


017.10

W
A
U
5 6 7 6

K
8 4

E
9
12 25
11

S
5 27 3 3
10 3 13
7 14
26 15

H
3

A
4

21
10
4
11
3
4 12
3
2
16
3 17
18
3
28

24

5 9

9
12
11
23 10 7
5
22
19

20

5
21
24
23

32 FORM 6252 Fifth Edition


017.10
OIL COOLER CONNECTIONS NATURALLY ASPIRATED

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 17
1 154813D 1 1 U-BOLT, 5/16"
2 305607F 1 1 TUBE, Water Inlet, Exhaust Manifold
3 41236C 8 8 CLAMP, Hose
4 117234C 4 4 HOSE
5 291111 8 8 WASHER, Lock, M10
6 WS808318 2 2 SCREW, Hex Head, M10 x 40 mm
7 350450 5 5 WASHER, Flat, M10
8 A305607B 1 1 TUBE, Water Inlet-Assembly
9 304314 3 3 GASKET, Water Inlet Tube to Oil Cooler
10 B277 4 4 WASHER, Flat, 5/16"
B277A 4 4 WASHER, Flat, 5/16"
11 21051 8 8 WASHER, Lock, 5/16"
12 21181 6 6 NUT, Hex, 5/16"-18
13 305443F 1 1 BRACKET, Tube Support
14 120132L 1 1 SPACER, 5/16" x 1" x 1"
15 177488E 1 1 CLIP, Tube
16 290193 1 1 WASHER, Flat, M12
17 291107 1 1 WASHER, Lock, M12
18 290088 1 1 SCREW, Hex Head, M12 x 35 mm
19 158358 1 1 SPACER
20 305443 1 1 BRACKET, Intercooler Tube
21 154813H 2 2 U-BOLT, 5/16"
22 291677 5 5 SCREW, Hex Head, M10 x 35 mm
23 A305127B 1 TUBE, Oil Cooler-Assembly
A305127C 1 TUBE, Oil Cooler-Assembly
24 290393 6 6 SCREW, Hex Head, M10 x 25 mm
25 290679 1 1 SCREW, Hex Head, M10 x 30 mm
26 305443A 1 1 SUPPORT, Tube
27 305607A 1 1 TUBE, Oil Cooler Water Inlet (Upper)
28 A305607 1 1 TUBE, Oil Cooler Water Inlet-Assembly

FORM 6252 Fifth Edition 33


017.20

W
A
U
K 4

E
1
3

S
H 2

A
6

TO
OIL
FILTER 8
12
8

10

TO
CRANKCASE

11

10

11

34 FORM 6252 Fifth Edition


017.20
OIL COOLER REMOTE

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 17
A300017 1 1 1 1 OIL COOLER-Assembly
1 300017 1 1 1 1 OIL COOLER
2 305445K 2 2 2 2 GASKET, Oil Cooler Connection
3 A305570 2 2 2 2 FLANGE-Assembly
4 21431 8 8 8 8 SCREW, Hex Head, 1/2"-13 x 1-1/2"
5 21054 8 8 8 8 WASHER, Lock, 1/2"
6 78212W 1 1 2 2 BUSHING, Reducing
7 A305420F 2 2 2 2 FLANGE, Oil Cooler Water-Assembly
8 304760 2 2 2 2 O-RING, Viton
9 F305204 1 1 1 1 FLANGE, Engine Oil Outlet-Assembly
10 291111 5 5 5 5 WASHER, Lock, M10
11 290164 5 5 5 5 SCREW, Socket Head, M10 x 25 mm
12 G305204 1 1 1 1 FLANGE, Engine Oil Inlet-Assembly

FORM 6252 Fifth Edition 35


017.30

W
A
U 1

K
E 2

S
H
A
5

3 7
12

6 11

7 10
9

13
8

15

14

36 FORM 6252 Fifth Edition


017.30
OIL COOLER, SHELL AND TUBE

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 17
AD305274D 1 OIL COOLER-Assembly
AD305274A 1 OIL COOLER-Assembly
AE305274A 1 1 OIL COOLER-Assembly
1 208963 1 1 GASKET
2 AA208968C 1 TUBE AND BAFFLE-Assembly
AC208968D 1 TUBE AND BAFFLE-Assembly
3 208964 1 1 GASKET
4 305776B 1 1 BONNET, Oil Cooler Inlet
5 305196 8 8 SCREW, Hex Head, M12 x 75 mm
6 294024 8 8 STUD, M10 x 35 mm
7 76400 2 2 COCK, Drain, 1/4"
8 290683 16 16 NUT, Hex, M12
9 290235 4 4 WASHER, Copper
10 290772 4 4 PIPE, Screw, 3/8"
11 208974 2 2 GASKET, Packing
12 208966 1 1 BONNET, Rear
13 291012 8 8 SCREW, Hex Head, M12 x 60 mm
14 A305274D 1 SHELL, Weldment-Assembly
A305274A 1 SHELL, Weldment-Assembly
15 78282E 1 1 PLUG, Pipe, Square Head, 1/2" (Oil drain)

FORM 6252 Fifth Edition 37


017.40

W
A 1 3
4

U
2

K 5

E
S
6
1 6

H
7
5
9

A
8

9 16

15

14

10 19

11
17
12

13
20
18

38 FORM 6252 Fifth Edition


017.40
OIL COOLER CONNECTIONS, SHELL AND TUBE

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 17
1 A305204C 2 1 TUBE, Oil Cooler-Assembly
A305204B 1 TUBE, Oil Cooler-Assembly
2 306045C 1 1 GASKET, Oil Tube
3 K305204A 1 1 TUBE, Oil Cooler To Filter
4 290164 2 2 SCREW, Socket Head, M10 x 25 mm
5 290180 8 8 SCREW, Hex Head, M12 x 40 mm
6 21054 8 8 WASHER, Lock, 1/2"
7 292842 3 3 SCREW, Socket Head, M10 x 35 mm
8 177088 1 1 PLATE, Name, Drain
9 305801A 2 2 GASKET, Oil Cooler
10 305791A 2 2 GASKET, Inlet Flange
11 305790A 2 2 FLANGE, Water Connection
12 291111 8 8 WASHER, Lock, M10
13 290039 8 8 NUT, Hex, M10
14 291677 12 12 SCREW, Hex Head, M10 x 35 mm
15 306040 12 12 WASHER, Special
16 306091A 1 SUPPORT, Oil Cooler, RH GLD/2
17 306091 2 1 SUPPORT, Oil Cooler, LH GLD/2
18 290179 6 6 SCREW, Hex Head, M12 x 30 mm
19 290193 6 6 WASHER, Flat, M12
20 291107 6 6 WASHER, Lock, M12

FORM 6252 Fifth Edition 39


020.00

W
A
U
K
E
S
H
6 31
1

A
30

21

18

29

4
17
2 7 16
15
13

19 22
20
23
5
24
3
14
25
12
13 27

28
8

9
26
11

10

40 FORM 6252 Fifth Edition


020.00
CRANKCASE
GROUPS 17, 20, 29, 65, 294
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 20
AA300120G 1 1 1 1 1 CRANKCASE-Assembly (Includes the
Camshaft Bushings in Group 023.00)
A300120G 1 1 1 1 1 CRANKCASE-Assembly
AA301020F 1 1 1 1 1 CRANKCASE-Assembly (Includes the
Camshaft Bushings in Group 023.00)
A301020F 1 1 1 1 1 CRANKCASE-Assembly
1 300120G 1 1 1 1 1 CRANKCASE
301020F 1 1 1 1 1 CRANKCASE
2 304118A 2 2 2 2 2 2 2 2 2 2 PLUG, O-Ring, M45
3 304118 2 2 2 2 2 2 2 2 2 2 PLUG, Oil Gallery
4 304745C 2 2 2 2 2 2 2 2 2 2 O-RING, Oil Gallery
5 304745 4 4 4 4 4 4 4 4 4 4 O-RING, Auxiliary Plug, Viton
6 294918 1 1 1 1 1 1 1 1 1 1 SCREW, Set, M10 x 10 mm
7 304029 1 1 1 1 1 1 1 1 1 1 ADAPTER, Stud
8 301049A 1 1 1 1 1 CAP, Main Bearing (Center)
301049B 1 1 1 1 1 CAP, Main Bearing (Center)Machining is
required on front main bearing cap if oil
pump idler spindle is going to be mounted.
9 301047A 8 8 8 8 8 CAP, Main Bearing (Rear/Internal)
301047B 6 6 6 6 6
10 304026 14 14 14 14 14 18 18 18 18 18 BOLT, Main Bearing Cap
11 304027 14 14 14 14 14 18 18 18 18 18 WASHER, Main Bearing Cap
12 304062 9 9 9 9 9 PIN, Dowel, Main Bearing Cap
293352 14 14 14 14 14 PIN, Dowel, Main Bearing Cap
13 304818 14 14 14 14 14 18 18 18 18 18 BOLT, Cross, Bearing Cap
14 304819 12 12 12 12 12 16 16 16 16 16 WASHER, Cross Bolt
15 304820 2 2 2 2 2 2 2 2 2 2 WASHER, O-Ring
16 304821 2 2 2 2 2 2 2 2 2 2 O-RING, 15.88 mm
17 304028 6 6 6 6 6 8 8 8 8 8 CAPSCREW, Pin
18 304000F 36 36 36 36 36 48 48 48 48 48 STUD, Cylinder Head
304000C 36 48 STUD, Cylinder Head GLD/2
19 305634B 7 7 7 7 7 9 9 9 9 9 PLUG, M14, Auxiliary Rocker Arm Shaft
20 305890 8 8 8 8 8 10 10 10 10 10 GASKET, Copper Washer
21 304063 12 12 12 12 12 16 16 16 16 16 PIN, Dowel
22 A305376E 6 6 6 6 6 8 8 8 8 8 JET, Piston Cooling-Assembly, Banjo Style
23 305197B 6 6 6 6 6 8 8 8 8 8 GASKET, Copper Sealing
24 306068 6 6 6 6 6 8 8 8 8 8 SCREW, Hollow, M14 X 1.5 mm
25 290438 6 6 6 6 6 8 8 8 8 8 SCREW, Socket Head, M8 X 16 mm
26 290044 72 72 72 72 72 96 96 96 96 86 SCREW, Hex Head, M10 x 20 mm
27 300024 6 6 6 6 6 8 8 8 8 8 COVER, Inspection-Connecting Rod
28 304708A 6 6 6 6 6 8 8 8 8 8 GASKET, Connecting Rod Inspection Cover
29 305430B 1 1 1 1 1 1 1 1 1 1 GASKET, Oil Retainer
C300190A 1 1 1 1 1 1 1 1 1 1 RETAINER, Assembly
30 300190A 1 1 1 1 1 1 1 1 1 1 RETAINER, Rear Oil Seal
31 304047A 1 1 1 1 1 1 1 1 1 1 REAR SEAL, Oil
Continued

FORM 6252 Fifth Edition 41


020.01

W
A 50
51

U
K 40 53

E
39
35 34

S
42 38 52

H
43

37

A 36
33

32

48 49
44

46
44

58 45 54 55
57
56

47
41

42 FORM 6252 Fifth Edition


020.01
CRANKCASE
GROUPS 17, 20, 29, 65, 294
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 20 (CONTINUED)
32 78210B 1 1 1 1 1 1 1 1 1 1 ELBOW, Reducing
33 304882 2 2 2 2 2 2 2 2 2 2 PIN, Dowel
34 291677 10 10 10 10 10 10 10 10 10 10 SCREW, Hex Head, M10 x 35 mm
35 291111 10 10 10 10 10 10 10 10 10 10 WASHER, Lock, M10
36 305156 1 1 1 1 1 1 1 1 1 1 ADAPTER, Pipe
37 78282C 1 1 1 1 1 1 1 1 1 1 PLUG, Hex Head
38 350890D 1 1 1 1 1 1 1 1 1 1 ADAPTER, M27 x 0.3/4" NPT
39 B6280 1 1 1 1 1 1 1 1 1 1 BUSHING, Reducer, 3/4" to 3/8"
40 73413A 1 1 1 1 1 1 1 1 1 1 COCK, Drain
41 211297 1 1 1 1 1 1 1 1 1 1 DECAL, Identification
GROUP 29
42 304119 1 1 PLUG, Turbo Drain
43 304731 1 1 GASKET, Copper Washer
GROUP 65
44 290393 18 24 24 18 18 26 32 32 26 26 SCREW, Hex Head, M10 x 25 mm
45 304700F 1 1 1 1 1 1 1 1 1 1 COVER, Camshaft (With 1/8"-27 NPTF Hole)
46 304707B 5 6 6 5 5 7 8 8 7 7 O-RING, Camshaft Cover
47 304700E 3 4 4 3 3 5 6 6 5 5 COVER, Camshaft
48 304700J 1 1 1 1 1 1 1 1 1 1 COVER, Camshaft (With 1/4" NPT Hole)
49 26750 1 1 1 1 1 1 1 1 1 1 PLUG, 1/4" NPT
50 305067A 1 1 1 1 1 1 GASKET, Baffle Box
51 305633B 1 1 1 1 1 1 BOX, Baffle
52 78282A 1 1 1 1 1 1 PLUG, Square Head
53 290044 4 4 4 4 4 4 SCREW, Hex Head, M10 x 20 mm
GROUP 17
54 293237 2 2 2 2 2 2 2 2 2 2 STUD, M10
55 295825 2 2 2 2 2 2 2 2 2 2 NUT, M10, Grade 10
GROUP 294
56 296165 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M12 x 20 mm
57 291107 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, M12
58 Y18813K 2 2 2 2 2 2 2 2 2 2 WASHER, Flat, M12

FORM 6252 Fifth Edition 43


021.00

W 17

A 18

U 26

K 14

E 19

S
H 16 27

A 11

10

4
8

5 9
3
15

13
5
20 1

6
2

7
16

25
21 12

22
23

24

44 FORM 6252 Fifth Edition


021.00
WATER OUTLET THERMOSTAT HOUSING
GROUPS 21, 78
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 21
1 304342C 1 1 1 1 1 1 1 1 1 1 FLANGE, Water Outlet
2 304317 1 1 1 1 1 1 1 1 1 1 GASKET, Flange, Water Outlet
3 290679 1 1 1 1 1 1 1 1 1 1 SCREW, Socket Head, M10 x 30 mm
4 294946 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 120 mm
5 291111 3 3 3 3 3 3 3 3 3 3 WASHER, Lock, M10
GROUP 78
A304310 1 1 1 1 1 1 1 1 1 1 HOUSING, Thermostat-Assembly
6 304310 1 1 1 1 1 1 1 1 1 1 HOUSING, Thermostat
7 293650 9 9 9 9 9 9 9 9 9 9 STUD, M8 x 35 mm
8 211887B 3 3 3 3 3 3 3 3 3 3 THERMOSTAT, Standard 170 F (77 C)
211887H 3 3 3 3 3 3 3 3 3 3 THERMOSTAT, Hot Water 210 F (100 C)
9 153610 3 3 3 3 3 3 3 3 3 3 SEAL, Thermostat
10 304325 3 3 3 3 3 3 3 3 3 3 WASHER, Thermostat End
11 294927 3 3 3 3 3 3 3 3 3 3 RING, Retainer, M27
12 304081 3 3 3 3 3 3 3 3 3 3 PLUG, Cup, M36
13 304709 1 1 1 1 1 1 1 1 1 1 PLUG, Drain, M18 x 1/2"
14 304309 1 1 1 1 1 1 1 1 1 1 GASKET, Thermostat Box
15 305713P 1 1 1 1 1 1 1 1 1 1 TUBE, Water
16 199111J 2 2 2 2 2 2 2 2 2 2 ELBOW, Male
17 290617 9 9 9 9 9 9 9 9 9 9 NUT, Hex, M8
18 293242 9 9 9 9 9 9 9 9 9 9 WASHER, Flat, M8
19 78212C 1 1 1 1 1 1 1 1 1 1 BUSHING, Reducing, 1/2" to 1/4"
20 350890C 1 1 1 1 1 1 1 1 1 1 ADAPTER, M12 x 1/4" NPT
21 291111 1 1 1 1 1 1 1 1 1 1 WASHER, Lock, M10
22 169013G 1 1 1 1 1 1 1 1 1 1 CLIP, 1/4" Diameter
23 78002 1 1 1 1 1 1 1 1 1 1 SPACER
24 294506 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 55 mm
25 295825 1 1 1 1 1 1 1 1 1 1 NUT, Hex, M10, Grade 10
26 A304342D 1 1 1 1 1 1 1 1 1 1 FLANGE, Water Outlet-Assembly
(Use without water pump)
27 WS808394 9 9 9 9 9 9 9 9 9 9 SCREW, Hex Head, M8 x 35 mm

FORM 6252 Fifth Edition 45


022.00

W
A
U
9 13

12

K 14 13

E
15

S
8 8

H
41
31
16 38
33

A 13
32

33 9
8
31
30
34

8 11

32

35
2
39
1 21
17
22
36, 37
19
18 24
10 17
22
29
39 21

20
9 27
8 28
7 23
3 25
26
5

42

40

46 FORM 6252 Fifth Edition


022.00
IGNITION CUSTOM ENGINE CONTROL
GROUPS 22, 26
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 22
1 305944A 1 1 1 1 1 1 1 1 1 1 BRACKET, CEC J-Box Mtg
2 305525N 1 1 1 1 1 1 1 1 1 1 BRACE, CEC J-Box Mtg
3 740608A 1 1 1 1 1 1 1 1 1 1 MODULE, Ignition
4 G305628A 1 1 1 1 HARNESS, Primary-Assembly
H305628A 1 1 1 1 1 1 HARNESS, Primary-Assembly
5 295841J 1 1 1 1 1 1 1 1 1 1 HARNESS, Ignition Power-Assembly
6 208499 1 1 1 1 1 1 1 1 1 1 ELBOW, Conduit, 1/2"
7 WS808297 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M8 x 30 mm
8 21051 27 27 27 27 27 35 35 35 35 35 WASHER, Lock, 5/16"
9 293242 31 31 31 31 31 39 39 39 39 39 WASHER, Flat, M8
10 63809E 2 2 2 2 2 2 2 2 2 2 SPACER
11 292032 2 2 2 2 2 7 7 7 7 7 SCREW, Hex Head, M8 x 25 mm
12 169013K 5 5 5 5 5 6 6 6 6 6 CLIP, 3/8"
13 290803 21 21 21 21 21 28 28 28 28 28 SCREW, Hex Head, M8 x 22 mm
14 69694 6 6 6 6 6 8 8 8 8 8 COIL, Ignition
15 305629 3 3 3 3 3 4 4 4 4 4 BRACKET, Ignition Coil
16 290617 9 9 9 9 9 12 12 12 12 12 NUT, Hex, M8
17 209611 4 2 2 2 2 2 2 2 2 2 SEAL, Conduit Connector
C214023A 1 1 1 1 1 1 1 1 1 1 JUNCTION BOX-Assembly
18 214023 1 1 1 1 1 1 1 1 1 1 BOX, Junction
19 69951 1 1 1 1 1 1 1 1 1 1 BAR, 3-Pole Jumper
20 207853X 1 1 1 1 1 1 1 1 1 1 PANEL, Junction Box
21 21049 6 6 6 6 6 6 6 6 6 6 WASHER, Lock, No.10
22 21108 6 6 6 6 6 6 6 6 6 6 SCREW, Round Head, No.10-32 x 3/8"
23 69950 4 4 4 4 4 4 4 4 4 4 BLOCK, Terminal
24 69815 6 6 6 6 4 4 4 4 4 4 BLOCK, Terminal, Double
25 69921 2 2 2 2 2 2 2 2 2 2 BRACKET, Mounting End
26 69817 1 1 1 1 1 1 1 1 1 1 PLATE, End
27 69811K 1 1 1 1 1 1 1 1 1 1 TRACK, Mounting
28 Y18813E 2 2 2 2 2 2 2 2 2 2 WASHER, Flat, No.10
29 21264 2 2 2 2 2 2 2 2 2 2 NUT, Hex, No.10-32
30 294523 4 4 4 4 4 3 3 3 3 3 SCREW, Hex Head, M6 x 20 mm
31 294952 5 5 5 5 5 5 5 5 5 5 WASHER, Flat, M6
32 293340 5 5 5 5 5 5 5 5 5 5 WASHER, Lock, M6
33 290452 5 5 5 5 5 5 5 5 5 5 NUT, Hex, M6
34 295495F 1 1 1 1 1 1 1 1 1 1 CABLE, Hall Effect Sensor-Assembly
35 951049B 1 1 1 1 1 1 1 1 1 1 CORD GRIP, 4-Wire
36 295988 4 4 4 4 4 4 4 4 4 4 SEAL, Hole, Oil Tight
37 295988A 1 1 1 1 1 1 1 1 1 1 SEAL, Hole, Oil Tight
38 350442 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M6 x 25 mm
39 106043 3 3 3 3 3 3 3 3 3 3 NUT, Conduit, Lock, 1/2"
40 A305921A 1 1 1 1 1 1 1 1 1 1 HARNESS, Chassis Ground-Assembly
41 295844A 1 1 1 1 1 1 1 1 1 1 PICKUP, Hall-effect
42 169013Y 2 2 2 2 2 2 2 2 2 2 CLIP, 3/4"
Continued

FORM 6252 Fifth Edition 47


022.01

W
50
52
49
46

A
48

U
53

45

K 54
51

E
47
55 44

S
H 56

43

48 FORM 6252 Fifth Edition


022.01
IGNITION CUSTOM ENGINE CONTROL
GROUPS 22, 26
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 22 (CONTINUED)
43 169013H 3 3 3 3 3 3 3 3 3 3 CLIP, 5/16"
44 304798S 1 1 1 1 1 1 1 1 1 1 COVER, Ignition Timing
45 WS808297 7 7 7 7 7 7 7 7 7 7 SCREW, Hex Head, M8 x 30 mm
46 26730 2 2 2 2 2 2 2 2 2 2 PIN, Roll
47 305141D 1 1 1 1 1 1 1 1 1 1 GASKET, Ignition Timing Cover
48 WS394595 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, M10 x 40 mm,
Full Thread, Grade 10.9
49 Y18813H 4 4 4 4 4 4 4 4 4 4 WASHER, Flat, 3/8"
50 305805 1 1 1 1 1 DISK, Ignition Timing
305805A 1 1 1 1 1 DISK, Ignition Timing
51 305187 1 1 1 1 1 1 1 1 1 1 PIN, Spring
52 211357M 6 6 6 6 6 8 8 8 8 8 CONNECTOR, Spark Plug-Assembly
53 305058C 6 6 6 6 6 8 8 8 8 8 COVER, Spark Plug Tube
54 740011 6 6 6 6 6 8 8 8 8 8 BOOT, Spark Plug
GROUP 26
55 69919 6 6 6 8 8 8 PLUG, Spark 18 mm (Gap 0.010")
60999S 6 8 PLUG, Spark 18 mm (Gap 0.010")
60999Z 6 6 8 8 PLUG, Spark 750 Hour Life
69919D 6 6 8 8 PLUG, Spark 1500 Hour Life
56 209681 6 6 8 8 GASKET, Spark Plug

NOTE: Replace spark plug gaskets every time a spark plug is reinstalled into the engine. Gaskets on P/N 69919 spark plugs do not require
replacement.

FORM 6252 Fifth Edition 49


022.10

W 19
29

A
28
6
7

U
20 39
6 17

K
7 26

18

E
27

25

S 15 16
23 32

H
17
18 21
12
11
10

A 25
6
29
22 12

10
6
30
40

7 31

24 7 9
1
11

37
13
35
14 8 5

36 33

35
4
34
7 37
38
6
5 37

35

41

50 FORM 6252 Fifth Edition


022.10
IGNITION CUSTOM ENGINE CONTROL CSA APPROVED
GROUPS 22, 26
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 22
1 305944A 1 1 1 1 1 1 1 1 1 1 BRACKET, CEC J-Box Mtg
2 305525N 1 1 1 1 1 1 1 1 1 1 BRACE, CEC J-Box Mtg
3 740608A 1 1 1 1 1 1 1 1 1 1 MODULE, Ignition
4 A214023A 1 1 1 1 1 1 1 1 1 1 JUNCTION BOX-Assembly
5 WS808297 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, Full Thread, M8 x 30 mm
6 21051 5 5 5 5 5 4 4 4 4 4 WASHER, Lock, 5/16"
7 293242 5 5 5 5 5 4 4 4 4 4 WASHER, Flat, M8
8 63809E 2 2 2 2 2 2 2 2 2 2 SPACER
9 294523 4 4 4 4 4 7 7 7 7 7 SCREW, Hex Head, M6 x 20 mm
10 293340 6 6 6 6 6 7 7 7 7 7 WASHER, Lock, M6
11 294952 6 6 6 6 6 7 7 7 7 7 WASHER, Flat, M6
12 290452 6 6 6 6 6 7 7 7 7 7 NUT, Hex, M6
13 21633 1 1 1 1 1 1 1 1 1 1 WASHER, Lock, Shakeproof, 3/8"
E211879 1 1 1 1 1 CONDUIT-Assembly
TA208479D 1 1 1 1 1 CONDUIT-Assembly
14 295497E 1 1 1 1 1 HARNESS, Ignition-Assembly
295497F 1 1 1 1 1 HARNESS, Ignition-Assembly
15 211886 1 1 1 1 1 1 1 1 1 1 BOX, Conduit, 1/2"
16 73654M 4 4 4 4 4 6 6 6 6 6 CONDUIT, Rigid, 1/2" NPT x 3"
17 211879 5 5 5 5 5 7 7 7 7 7 BOX, Conduit, 1/2"
18 208499 7 6 6 6 6 8 8 8 8 8 ELBOW, Conduit, 1/2"
19 208503N 6 6 6 6 6 8 8 8 8 8 LEAD, Primary-Shielded
20 78283A 1 1 1 1 1 1 1 1 1 1 PLUG, Pipe
21 162557 5 5 5 5 5 7 7 7 7 7 CONNECTOR, 3-4 Wire
22 954864A 9 9 9 9 9 11 11 11 11 11 CONNECTOR, Wire
23 100831J 4 4 4 4 4 1 1 1 1 1 CONDUIT, Rigid, 1/2" NPT x 3"
24 199074 2 2 2 2 2 2 2 2 2 2 WIRE, AWG No. 4 (20')
25 208546 3 3 3 3 3 3 3 3 3 3 REDUCER, Conduit, 3/4" to 1/2"
26 304701Z 3 3 3 3 3 4 4 4 4 4 BRACKET, Conduit Support
27 293333 3 3 3 3 3 4 4 4 4 4 U-BOLT, M8
28 290617 6 6 6 6 6 8 8 8 8 8 NUT, Hex, M8
29 290803 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, M8 x 22 mm
30 350442 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M6 x 25 mm
31 292032 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M8 x 25 mm
32 293982 7 7 7 7 7 7 7 7 7 7 SCREW, Hex Head, M8 x 30 mm
33 208499 1 1 1 1 1 1 1 1 1 1 ELBOW, Conduit
34 A305921A 1 1 1 1 1 1 1 1 1 1 HARNESS, Chassis Ground
35 295988 3 3 3 3 3 3 3 3 3 3 SEAL, Hole, Junction Box
36 295988A 1 1 1 1 1 1 1 1 1 1 SEAL, Hole, Junction Box
37 10643 3 3 3 3 3 3 3 3 3 3 NUT, Conduit, Lock Nut, 1/2"
38 209611 3 3 3 3 3 3 3 3 3 3 SEAL, 3/8"
39 26730 2 2 2 2 2 2 2 2 2 2 PIN, Roll
40 169013Y 2 2 2 2 2 2 2 2 2 2 CLIP, Harness
41 295841J 1 1 1 1 1 1 1 1 1 1 HARNESS, Ignition Power
Continued

FORM 6252 Fifth Edition 51


022.11

W
A
53 52
50
55 49

U
K 56

E
51

54 48

S 57

H
58 47

44

A
43
59 42
46

45

60

52 FORM 6252 Fifth Edition


022.11
IGNITION CUSTOM ENGINE CONTROL CSA APPROVED
GROUPS 22, 26
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 22 (CONTINUED)
42 295495F 1 1 1 1 1 1 1 1 1 1 CABLE, Hall-effect Sensor-Assembly
43 169013H 4 4 4 4 4 4 4 4 4 4 CLIP, 5/16"
44 290478 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 40 mm
45 350450 1 1 1 1 1 1 1 1 1 1 WASHER, Flat, M10
46 291111 1 1 1 1 1 1 1 1 1 1 WASHER, Lock, M10
47 295844A 1 1 1 1 1 1 1 1 1 1 PICKUP, Hall-effect
48 304798S 1 1 1 1 1 1 1 1 1 1 COVER, Ignition Timing
49 305141D 1 1 1 1 1 1 1 1 1 1 GASKET, Ignition Timing Cover
50 WS394595 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, M10 x 40 mm,
Full Thread, Grade 10.9
51 305187 1 1 1 1 1 1 1 1 1 1 PIN, Spring
52 305805 1 1 1 1 1 1 DISK, Ignition Timing
305805A 1 1 1 1 DISK, Ignition Timing
A69694G 6 6 6 6 6 8 8 6 8 8 COIL Assembly, Ignition, Flange Mount
53 69694G 6 6 6 6 6 8 8 6 8 8 COIL, Ignition, Flange Mount
54 296146B 6 6 6 6 6 8 8 6 8 8 LABEL, CSA Certification
55 291102 18 18 18 18 18 24 24 18 24 24 CAPSCREW, Hex Head, M8 x 20 mm
56 290479 18 18 18 18 18 24 24 18 24 24 WASHER, Lock, M8
57 292843 6 6 6 6 6 8 8 6 8 8 O-RING, Nitrile
58 A211797J 6 6 6 6 6 8 8 6 8 8 EXTENSION, Spark Plug
GROUP 26
59 69919 6 6 6 8 8 8 PLUG, Spark 18 mm (Gap 0.010")
60999S 6 8 PLUG, Spark 18 mm (Gap 0.010")
60999Z 6 6 8 8 PLUG, Spark 750 Hour Life
69919D 6 6 8 8 PLUG, Spark 1500 Hour Life
60 209681 6 6 8 8 GASKET, Spark Plug

NOTE: Replace spark plug gaskets every time a spark plug is reinstalled into the engine. Gaskets on P/N 69919 spark plugs do not require
replacement.

FORM 6252 Fifth Edition 53


022.20

W
A
U 2

K
1

E 3

S
H
A 4

14
8
6

5
4

7
9

13
12
11
10

54 FORM 6252 Fifth Edition


022.20
IGNITION CUSTOM ENGINE CONTROL JUNCTION BOX CSA APPROVED

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 22
A214023A 1 1 1 1 1 1 1 1 1 1 BOX, Junction-Assembly
1 214023A 1 1 1 1 1 1 1 1 1 1 BOX, Junction
2 305844 1 1 1 1 1 1 1 1 1 1 DECAL, Ignition Switch
3 A69831 1 1 1 1 1 1 1 1 1 1 SWITCH, On/Off-Assembly
4 21049 6 6 6 6 6 6 6 6 6 6 WASHER, Lock, No. 10
5 21108 6 6 6 6 6 6 6 6 6 6 SCREW, Round Head, No. 10-32 x 3/8"
6 21264 2 2 2 2 2 2 2 2 2 2 NUT, Hex, No. 10-32
7 207853X 1 1 1 1 1 1 1 1 1 1 PANEL, Junction Box
8 69811K 1 1 1 1 1 1 1 1 1 1 TRACK, Terminal
9 Y18813E 2 2 2 2 2 2 2 2 2 2 WASHER, Flat, No.10
10 69817 1 1 1 1 1 2 2 2 2 2 PLATE, End
11 69921 2 2 2 2 2 2 2 2 2 2 BRACKET, End Mounting
12 69950 4 4 4 4 4 2 2 2 2 2 BLOCK, Terminal, Double Branch
13 69815 6 6 6 6 6 6 6 6 6 6 BLOCK, Terminal, Double
14 69951 1 1 1 1 1 1 1 1 1 1 BAR, 3 Pole Jumper-Assembly

FORM 6252 Fifth Edition 55


022.30

W
1

A
4

U 5
6

K 10 8
7

E 8

S
3
4

H
11 4
24

12 8

A 15
14 9

16
25

13
15
8

11 4

18

14
17
19

20 15
15

21

22

23

56 FORM 6252 Fifth Edition


022.30
IGNITION MAGNETO
GROUPS 22, 26
ITEM PART F18 H24
NO. NUMBER DESCRIPTION
G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 22
1 211357M 6 6 6 6 6 8 8 8 8 8 CONNECTOR, Spark Plug-Assembly
2 305058C 6 6 6 6 6 8 8 8 8 8 BOOT, Spark Plug
3 740011 6 6 6 6 6 8 8 8 8 8 BOOT, High Temperature
4 293242 23 23 23 23 23 27 27 27 27 27 WASHER, Flat, M8
5 290803 21 21 21 21 21 25 25 25 25 25 SCREW, Hex Head, M8 x 22 mm
6 69694 6 6 6 6 6 8 8 8 8 8 COIL, Ignition
7 305629 3 3 3 3 3 4 4 4 4 4 BRACKET, Ignition Coil
8 21051 23 23 23 23 23 27 27 27 27 27 WASHER, Lock, 5/16"
9 290617 9 11 11 11 11 11 11 11 11 11 NUT, Hex, M8
10 292032 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M8 x 25 mm
11 169013K 2 2 2 2 2 2 2 2 2 2 CLIP, Harness, 3/8" x 13/32"
12 290393 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 25 mm
13 169013L 2 2 2 2 2 2 2 2 2 2 CLIP, Harness, 3/8" x 17/32"
14 291111 3 3 3 3 3 3 3 3 3 3 WASHER, Lock, M10
15 350450 6 7 7 7 7 7 7 7 7 7 WASHER, Flat, M10
16 293982 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M8 x 30 mm
17 A305628A 1 1 1 1 1 HARNESS, Primary-Assembly
C305628 1 1 1 1 1 HARNESS, Primary-Assembly
18 169013V 1 1 1 1 1 1 1 1 1 1 CLIP, Harness, 5/8" x 17/32"
19 290679 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 30 mm
20 290478 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 40 mm
21 295825 2 2 2 2 2 2 2 2 2 2 NUT, Hex, M10, Grade 10
22 305720A 1 1 1 1 1 1 1 1 1 1 SLEEVE, Flexible Coupling
23 69711M 1 1 1 1 1 MAGNETO, Altronic III
69711G 1 1 1 1 1 MAGNETO, Altronic III
GROUP 26
24 69919 6 6 6 8 8 8 PLUG, Spark 18 mm (Gap 0.010")
60999S 6 8 PLUG, Spark 18 mm (Gap 0.010")
60999Z 6 8 PLUG, Spark 750 Hour Life
69919D 6 8 PLUG, Spark 1500 Hour Life
25 209681 6 6 8 8 GASKET, Spark Plug

FORM 6252 Fifth Edition 57


022.40

W
A
7

U
19
23
12

K
20
11
21
21
12
17 20

E 12 18

S 15

H 14 8

A 22
9

6 16

9
13

10
23

24 21
33
20 32 30
25
26
4
4
5

3 21
19 32

31
2

1 28
29
27

58 FORM 6252 Fifth Edition


022.40
IGNITION MAGNETO CSA APPROVED
GROUPS 22, 26
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 22
1 69711M 1 1 1 1 1 MAGNETO, Altronic III

69711N 1 1 1 1 1 MAGNETO, Altronic III


2 305720A 1 1 1 1 1 1 1 1 1 1 SLEEVE, Flexible Coupling
3 290478 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 40 mm
4 350450 4 4 4 4 4 4 4 4 4 4 WASHER, Flat, M10
5 295825 2 2 2 2 2 2 2 2 2 2 NUT, Hex, M10, Grade 10
H208497D 1 1 1 1 1 CONDUIT-Assembly
XA208497D 1 1 1 1 1 CONDUIT-Assembly
6 208497D 5 5 5 5 5 7 7 7 7 7 BOX, Conduit, 1/2"
7 208503J 6 6 6 6 6 8 8 8 8 8 LEAD, Primary-Shielded
8 208499 6 6 6 6 6 8 8 8 8 8 ELBOW, Conduit, 1/2"
9 208505A 5 5 5 5 5 7 7 7 7 7 CONDUIT, Rigid, 1/2" NPT x 3"
10 HC209250 1 1 1 1 1 CONDUIT, Flexible-Assembly
GA209250 1 1 1 1 1 CONDUIT, Flexible-Assembly
11 208499A 1 1 1 1 1 1 1 1 1 1 ELBOW, Conduit, 3/4"
12 208546 3 3 3 3 3 3 3 3 3 3 REDUCER, Conduit, 3/4" to 1/2"
13 A208502G 1 1 1 1 1 CABLE, Magneto-Assembly
C209765A 1 1 1 1 1 CABLE, Magneto-Assembly
14 162557 5 5 5 5 5 7 7 7 7 7 JOINT, Wire
15 954864A 7 7 7 7 7 9 9 9 9 9 CONNECTOR, Wire
16 448039 2 2 2 2 2 2 2 2 2 2 WIRE, Primary (10 feet)
17 208497C 1 1 1 1 1 1 1 1 1 1 BOX, Conduit Outlet, 3/4"
18 304701A 3 3 3 3 3 4 4 4 4 4 BRACKET, Conduit Support
19 290803 4 4 4 4 4 9 9 9 9 9 SCREW, Hex Head, M8 x 22 mm
20 21051 14 14 14 14 14 17 17 17 17 17 WASHER, Lock, 5/16"
21 293242 11 13 13 13 13 14 14 14 14 14 WASHER, Flat, M8
22 293333 3 3 3 3 3 4 4 4 4 4 U-BOLT, M8
23 290617 6 7 7 7 7 9 9 9 9 9 NUT, Hex, M8
24 168847S 1 1 1 1 1 1 1 1 1 1 SUPPORT, Clip
25 169013W 3 3 3 3 3 3 3 3 3 3 CLIP, Harness
26 WS809173 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head-Full Thread, M8 x 18 mm
A69743D 1 1 1 1 1 1 1 1 1 1 SWITCH, Ignition-Assembly
27 69743D 1 1 1 1 1 1 1 1 1 1 SWITCH, Ignition
28 118996A 1 1 1 1 1 1 1 1 1 1 DECAL, Ignition
29 305690 1 1 1 1 1 1 1 1 1 1 BRACKET, Ignition Switch
30 293982 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M8 x 30 mm
31 350421 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head-Full Thread, M6 x 22 mm
32 21050 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, 1/4"
33 290452 2 2 2 2 2 2 2 2 2 2 NUT, Hex, M6
Continued

FORM 6252 Fifth Edition 59


022.41

W
A
U 36
34

K
E
S
37

35

H 38

A 39

40

41

60 FORM 6252 Fifth Edition


022.41
IGNITION MAGNETO CSA APPROVED
GROUPS 22, 26
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 22 (CONTINUED)
A69694G 6 6 6 6 6 8 8 8 8 8 COIL - Assembly, Ignition, Flange Mount
34 69694G 6 6 6 6 6 8 8 8 8 8 COIL, Ignition, Flange Mount
35 296146B 6 6 6 6 6 8 8 8 8 8 LABEL, CSA Certification
36 291102 18 18 18 18 18 24 24 24 24 24 CAPSCREW, Hex Head, M8 x 20 mm
37 290479 18 18 18 18 18 24 24 24 24 24 WASHER, Lock, M8
38 292843 6 6 6 6 6 8 8 8 8 8 O-RING, Nitrile
39 A211797J 6 6 6 6 6 8 8 8 8 8 EXTENSION, Spark Plug
GROUP 26
40 69919 6 6 6 8 8 8 PLUG, Spark, 18 mm (Gap 0.010")
60999S 6 8 PLUG, Spark, 18 mm (Gap 0.010")
60999Z 6 8 PLUG, Spark, 750 Hour Life
69919D 6 8 PLUG, Spark, 1500 Hour Life
41 209681 6 6 6 6 6 8 8 8 8 8 GASKET, Spark Plug

NOTE: Replace spark plug gaskets every time a spark plug is reinstalled into the engine. Gaskets on P/N 69919 spark plugs do not require
replacement.

FORM 6252 Fifth Edition 61


022.50

W 9

A
11
12 6
5

U
6

K
13
6
11

E
5
5 10

S A

H
13
35 14

A
4
36

14 16 15
5 6
17 29

1
28 27
34 19 24
18 26
23

22
16

20
15
25

8
7 21

2
A 31 17

30

33

32

62 FORM 6252 Fifth Edition


022.50
IGNITION CUSTOM ENGINE CONTROL
GROUPS 22, 26
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 22
1 305487C 1 1 1 1 1 1 1 1 1 1 BRACKET, Ignition Module, Cam Cover
Mounted
2 69787A 1 1 1 1 1 1 1 1 1 1 MODULE, Ignition
3 D305628A 1 1 1 1 1 HARNESS, Primary-Assembly
H305628 1 1 1 1 1 HARNESS, Primary-Assembly
4 295841C 1 1 1 1 1 1 1 1 1 1 HARNESS, Ignition Power-Assembly
5 21051 21 21 21 21 21 28 28 28 28 28 WASHER, Lock, 5/16"
6 293242 23 23 23 23 23 33 33 33 33 33 WASHER, Flat, M8
7 291024 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, M10 x 50 mm
8 291111 4 4 4 4 4 4 4 4 4 4 WASHER, Lock, M10
9 292032 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M8 x 25 mm
10 169013K 2 2 2 2 2 2 2 2 2 2 CLIP, 3/8"
11 290803 21 21 21 21 21 28 28 28 28 28 SCREW, Hex Head, M8 x 22 mm
12 69694 6 6 6 6 6 8 8 8 8 8 COIL, Ignition
13 305629 3 3 3 3 3 4 4 4 4 4 BRACKET, Ignition Coil
14 290617 22 22 22 22 22 28 28 28 28 28 NUT, Hex, M8
15 106043 2 2 2 2 2 3 3 3 3 3 NUT, Lock, Conduit
16 209611 2 2 2 2 2 3 3 3 3 3 GASKET, Connector
C211395L 1 1 1 1 1 1 1 1 1 1 JUNCTION BOX-Assembly
17 211395L 1 1 1 1 1 1 1 1 1 1 BOX, Junction
18 295988 2 2 2 2 2 2 2 2 2 2 SEAL, Oil Tight Hole
19 209244Z 1 1 1 1 1 1 1 1 1 1 PANEL, Junction Box
20 21049 4 4 4 4 4 4 4 4 4 4 WASHER, Lock, No.10
21 21108 4 4 4 4 4 4 4 4 4 4 SCREW, Round Head, No.10-32 x 3/8"
22 69818 5 5 5 5 5 5 5 5 5 5 BLOCK, Terminal
23 69921 2 2 2 2 2 2 2 2 2 2 BRACKET, Mounting End
24 69819 1 1 1 1 1 1 1 1 1 1 PLATE, End
25 21089 4 4 4 4 4 4 4 4 4 4 SCREW, Round Head, No. 8-32 x 3/8"
26 69811B 1 1 1 1 1 1 1 1 1 1 RACK, Terminal
27 418813D 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, No. 8
28 21260 2 2 2 2 2 2 2 2 2 2 NUT, Hex, No. 8-32
29 291102 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, M8 x 20 mm
30 306047 1 1 1 1 1 1 1 1 1 1 WIRE, Ground
31 306047A 1 1 1 1 1 1 1 1 1 1 WIRE, Ground
32 295495A 1 1 1 1 1 1 1 1 1 1 CABLE, Hall Effect Sensor-Assembly
33 169013V 1 1 1 1 1 1 1 1 1 1 CLIP, 1/2"
34 295844A 1 1 1 1 1 1 1 1 1 1 PICKUP, Hall-effect
35 304798S 1 1 1 1 1 1 1 1 1 1 COVER, Ignition Timing
36 WS808297 7 7 7 7 7 7 7 7 7 7 SCREW, Hex Head, M8 x 30 mm
Continued

FORM 6252 Fifth Edition 63


022.51

W 43

A
U 44

K
E
45
41

40

S
39 A
37 38
46

H 47

A 42

64 FORM 6252 Fifth Edition


022.51
IGNITION CUSTOM ENGINE CONTROL
GROUPS 22, 26
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 22 (CONTINUED)
37 26730 2 2 2 2 2 2 2 2 2 2 PIN, Roll
38 305141D 1 1 1 1 1 1 1 1 1 1 GASKET, Ignition Timing Cover
39 WS808318 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, M10 x 40 mm,
Full Thread
40 Y18813H 4 4 4 4 4 4 4 4 4 4 WASHER, Flat, 3/8"
41 305805 1 1 1 1 1 DISK, Ignition Timing
305805A 1 1 1 1 1 DISK, Ignition Timing
42 304077 1 1 1 1 1 1 1 1 1 1 PIN, Spring
43 211357M 6 6 6 6 6 8 8 8 8 8 CABLE, Spark Plug-Assembly
44 305058C 6 6 6 6 6 8 8 8 8 8 COVER, Spark Plug Tube
45 740011 6 6 6 6 6 8 8 8 8 8 BOOT, Spark Plug
GROUP 26
46 69919 6 6 6 8 8 8 PLUG, Spark, 18 mm (Gap 0.010")
60999S 6 8 PLUG, Spark, 18 mm (Gap 0.010")
60999Z 6 8 PLUG, Spark, 750 Hour Life
69919D 6 8 PLUG, Spark, 1500 Hour Life
47 209681 6 6 8 8 GASKET, Spark Plug

NOTE: Replace spark plug gaskets every time a spark plug is reinstalled into the engine. Gaskets on P/N 69919 spark plugs do not require
replacement.

FORM 6252 Fifth Edition 65


023.00

W
A
U
1
14

K 16

E
4
5 2
3

S 15

H
6 17
14 18
11

A
7 10
13
9

8
11
23
12

24

26 25

19

20

21

22

66 FORM 6252 Fifth Edition


023.00
CAMSHAFT, PUSH ROD, AUXILIARY ROCKER ARM
GROUPS 20, 23
ITEM PART F18 H24
DESCTIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 20
1 C300038 12 12 12 12 12 16 16 16 16 16 PUSHROD-Assembly
DA304030A 12 12 12 12 12 16 16 16 16 16 FOLLOWER, Camshaft-Assembly
2 294926 24 24 24 24 24 32 32 32 32 32 RING, Retaining
AA304030A 12 12 12 12 12 16 16 16 16 16 FOLLOWER, Camshaft, Subassembly
A304030A 12 12 12 12 12 16 16 16 16 16 FOLLOWER, Camshaft, Subassembly
3 304034A 12 12 12 12 12 16 16 16 16 16 SEAT, Pushrod
4 304033A 12 12 12 12 12 16 16 16 16 16 ROLLER, Cam Follower
5 295496C 12 12 12 12 12 16 16 16 16 16 SCREW, Set, M6 x 8 mm
6 304032D 12 12 12 12 12 16 16 16 16 16 BUSHING, Cam Follower
7 304031D 12 12 12 12 12 16 16 16 16 16 PIN, Cam Follower
8 305485 12 12 12 12 12 16 16 16 16 16 PIN, Roll, M4 x 16 mm
9 304030A 12 12 12 12 12 16 16 16 16 16 FOLLOWER, Camshaft, Subassembly
10 300048C 12 12 12 12 12 16 16 16 16 16 BEARING, Cam Follower
11 304037 12 12 12 12 12 16 16 16 16 16 SPACER, Cam Follower
12 304038 6 6 6 6 6 8 8 8 8 8 SPRING, Auxiliary Rocker Arm
13 304039 12 12 12 12 12 16 16 16 16 16 WASHER, Spring
A304036 2 2 2 2 2 SHAFT, Auxiliary Rocker Arm-Assembly
A304830 2 2 2 2 2 SHAFT, Auxiliary Rocker Arm-Assembly
14 304736 4 4 4 4 4 4 4 4 4 4 PLUG, Threaded
15 304036 2 2 2 2 2 SHAFT, Auxiliary Rocker Arm
304830 2 2 2 2 2 SHAFT, Auxiliary Rocker Arm
16 295496 4 4 4 4 4 4 4 4 4 4 SCREW, Set, M10 x 25 mm
17 304773 4 4 4 4 4 4 4 4 4 4 GASKET, Copper Washer
18 305585 4 4 4 4 4 4 4 4 4 4 NUT
19 301053 1 1 1 1 1 1 1 1 1 1 BUSHING, Camshaft (Rear)
20 300050 5 5 5 5 5 7 7 7 7 7 BUSHING, Camshaft
21 300027 1 1 1 1 1 1 1 1 1 1 BUSHING, Camshaft (Front)
22 290425 3 3 3 3 3 3 3 3 3 3 SCREW, Socket Head, M6 x 16 mm
GROUP 23
23 300323 1 1 1 1 1 CAMSHAFT
301623 1 1 1 1 1 CAMSHAFT
24 304009 1 1 1 1 1 1 1 1 1 1 RING, Adjustment, 0.1 mm (0.003")
304009A 1 1 1 1 1 1 1 1 1 1 RING, Adjustment, 0.15 mm (0.005")
304009B 2 2 2 2 2 2 2 2 2 2 RING, Adjustment, 0.2 mm (0.007")
304099 1 1 1 1 1 1 1 1 1 1 RING, Adjustment, 0.5 mm (0.020")
25 304008 1 1 1 1 1 1 1 1 1 1 BEARING, Camshaft Thrust
26 304077 1 1 1 1 1 1 1 1 1 1 PIN, Spiral, M10
Continued

FORM 6252 Fifth Edition 67


023.01

W
A
U
K
E
S
H
A
30
31
27

28

29

33

32

68 FORM 6252 Fifth Edition


023.01
CAMSHAFT, PUSH ROD, AUXILIARY ROCKER ARM
GROUPS 20, 23
ITEM PART F18 H24
DESCTIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 23 (CONTINUED)
27 290393 5 5 5 5 5 5 5 5 5 5 SCREW, Hex Head, M10 x 25 mm
28 300245 1 1 1 1 1 1 1 1 1 1 COVER, Camshaft, Rear
29 304792 1 1 1 1 1 1 1 1 1 1 GASKET, Camshaft Rear Cover
30 350450 6 6 6 6 6 6 6 6 6 6 WASHER, Flat, M10
31 WS241775 6 6 6 6 6 6 6 6 6 6 BOLT, Hex Head, M10 x 30 mm
32 301026D 1 1 1 1 1 1 1 1 1 1 GEAR, Camshaft
33 290678 6 6 6 6 6 6 6 6 6 6 SCREW, Hex Head, M10 x 45 mm
SERVICE REPAIR KITS
G-927-55 1 1 1 1 1 Camshaft Bushing Kit (Includes Items 1 3)
G-927-56 1 1 1 1 1 Camshaft Bushing Kit (Includes Items 1 3)

FORM 6252 Fifth Edition 69


025.00 10

W
9 20
8

A
U 1

K
E
S
H
19

A 2
3
5
6

7 4
11

12

13

6
14
16
18
15

17
6

70 FORM 6252 Fifth Edition


025.00
GOVERNOR AIR ACTUATOR

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 25
D155553C 1 1 1 1 1 1 1 1 1 1 ACTUATOR-Assembly
1 155553C 1 1 1 1 1 1 1 1 1 1 ACTUATOR
2 21195 1 1 1 1 1 1 1 1 1 1 NUT, Hex, 3/8" 24
3 305178 1 1 1 1 1 1 1 1 1 1 YOKE
4 292451 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M6 x 30 mm
5 294952 3 3 3 3 3 3 3 3 3 3 WASHER, Flat, M6
6 295367 3 3 3 3 3 3 3 3 3 3 NUT, Lock, M6
7 290393 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 25 mm
8 350450 2 2 2 2 2 2 2 2 2 2 WASHER, Flat, M10
9 291111 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, M10
10 295825 2 2 2 2 2 2 2 2 2 2 NUT, Hex, M10, Grade 10
A305436E 1 1 1 1 1 1 1 1 1 1 ROD-Assembly
11 305169 1 1 1 1 1 1 1 1 1 1 ROD END, M6 RH
12 290452 1 1 1 1 1 1 1 1 1 1 NUT, Hex, M6
13 305436E 1 1 1 1 1 1 1 1 1 1 ROD, Threaded, M6
14 305180 1 1 1 1 1 1 1 1 1 NUT, Hex, M6 LH
15 305169B 1 1 1 1 1 1 1 1 1 1 ROD END, M6 LH
16 295368 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M6 x 35 mm
17 209155 1 1 1 1 1 1 1 1 1 1 WASHER, Special
18 305116D 1 1 1 1 1 1 1 1 1 1 LEVER, Governor Speed Control
19 305895 1 1 1 1 1 1 1 1 1 1 BRACKET, Actuator Support
20 290478 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, M10 x 40 mm

FORM 6252 Fifth Edition 71


027.00

W
A
U
K 15

E
S
16

H 1

A
3

12
2
11
6 8

15

16
9
5

10
7 13

14

72 FORM 6252 Fifth Edition


027.00
TURBOCHARGER AND CONNECTIONS
GROUPS 27, 29
ITEM PART F18 H24
NO. NUMBER DESCRIPTION
G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 27
1 305996 1 1 1 1 TURBOCHARGER, High Speed
489084 1 1 O-RING, Compressor Housing
305840 1 TURBOCHARGER, Low Speed
489084 1 1 O-RING, Compressor Housing
305866 1 1 TURBOCHARGER, High Speed
489085 1 1 O-RING, Compressor Housing
305866A 1 1 TURBOCHARGER
489085 1 1 O-RING, Compressor Housing
306161A 1 TURBOCHARGER GLD/2
306160B 1 TURBOCHARGER GLD/2
489085 1 1 O-RING, Compressor Housing
305996A 1 1 TURBOCHARGER, Low Speed
489084 1 1 O-RING, Compressor Housing
305996B 1 1 1 1 TURBOCHARGER
489084 1 1 1 1 O-RING, Compressor Housing
305866A 1 TURBOCHARGER (LCR Only)
305864B 1 1 TURBOCHARGER
305866B 1 1 TURBOCHARGER
305866C 1 1 TURBOCHARGER , HCR, High Altitude
2 176774A 1 1 1 1 1 1 1 1 GASKET, Turbocharger Mounting
3 WS394595 4 4 4 4 4 4 4 4 SCREW, Hex Head, Stainless Steel,
M10 x 40 mm, Grade 10.9
4 21052 4 4 4 4 4 4 4 4 WASHER, Lock, Spring, 3/8"
5 290039 4 4 4 4 4 4 NUT, Hex, Stainless Steel, M10
291756 4 4
6 305123B 1 1 1 1 1 1 ADAPTER, Turbocharger Mounting
305123A 1 1 ADAPTER, Turbocharger Mounting
7 304258D 1 1 1 1 1 1 GASKET, Exhaust Manifold Outlet
304258B 1 1
304258E 1 1
8 290393 6 6 6 6 6 6 SCREW, Hex Head, M10 x 25 mm
294947 6 6 SCREW, Hex Head, M10 x 25 mm
Stainless Steel
9 350450 6 6 6 6 6 6 6 6 WASHER, Flat, 3/8"
GROUP 29
10 305414A 1 1 ELBOW, Intercooler Inlet
305414B 1 1 1 1 1 1 1 1 ELBOW, Intercooler Inlet
11 305408A 1 1 1 1 1 1 1 1 GASKET, Intercooler Inlet
12 291677 6 6 6 6 6 6 6 6 SCREW, Hex Head, M10 x 35 mm
292842 6 6 SCREW, Socket Head, M10 x 35 mm
290679 2* 2* SCREW, Hex Head, M10 x 30 mm
*Single Deltec
13 295586 1 1 2 1 1 1 2 1 O-RING, Viton
ELBOW, Turbo Discharge
14 305412A 1 1 1 1* 1 1 1 1* *Dual Deltec, High Speed
D305533 1 1 Single Deltec, Low Speed
C305533 1 1** 1 1** **Dual Deltec, Low Speed
15 305407 3 3 1 1 3 3 1 1 STRAP
16 B363 6 6 2 2 6 6 2 2 WASHER, Flat, 33/64"
Continued

FORM 6252 Fifth Edition 73


027.01

W
A 39

U
22
28

K 37

E
22
17

S 24

H
36 18

42 41

A
25

19 23
20

21
31

39

18
17

26
27

33
38
30

29

31

35
32
40
34

74 FORM 6252 Fifth Edition


027.01
TURBOCHARGER AND CONNECTIONS
GROUPS 27, 29
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 29 (CONTINUED)
17 290146 6 6 2 2 6 6 2 2 SCREW, Hex Head, M12 x 25 mm
18 291107 6 6 6 6 WASHER, Lock, M12
19 305419A 1 1 1 2* 1 1 1 2* RETAINER, Turbo, Discharge, *Dual Deltec
305556 1 1 1 Single Deltec
305419B 1 Low Speed
20 153402A 1 1 1 1 1 1 CLAMP, Hose
153402E 1 1
153402G 1 1
21 304745J 1 1 1 1 1 1 1 1 O-RING, Viton
22 305410 1 1 1 1 1 1 1 1 ELBOW, Turbocharger Inlet
305410U 1 1 1 1 ELBOW, Turbocharger Inlet
305410V 1 1 1 1 ELBOW, Turbocharger Inlet
23 305419 1 1 1 2 1 1 1 2 RETAINER, Turbocharger Inlet
24 211203E 1 1 1 1 1 1 1 1 O-RING, Nitrile
305461 1 1 Dual Deltec, Low Speed
212977D 1 1 Single Deltec
25 153402F 1 1 2 2 1 1 2 2 CLAMP, Hose
1 1 Single Deltec
26 78282F 1 1 1 1 1 1 1 1 PLUG, Hex Head, 3/4"
78282E 1 1 PLUG, Square Head, 1/2"
27 78282C 1 1 1 1 PLUG, Square Head, 1/4"
28 211203F 1 1 1 1 1 1 1 1 O-RING, Nitrile
29 306001B 1 1 GASKET, Carburetor Outlet, Dual Deltec
306001 1 1 Single Deltec
30 305410D 1 1 CONNECTOR, Deltec, Carburetor
31 291111 10 10 6 10 10 6 WASHER, Lock, M10
2 2 Single Deltec
32 294936 2 2 SCREW, Hex Head, M10 x 45, Dual Deltec
33 290039 6 6 NUT, Hex, M10
34 306020 1 1 BRACKET, Pipe Support, Single Deltec
306020A 1 1 BRACKET, Pipe Support, Dual Deltec
35 305410C 1 1 TUBE, Turbocharger Inlet
305410K 1 1 Dual Deltec, High Speed
36 A304156G 1 1 1 1* 1 1 1 1* TUBE ASM, Turbocharger Oil, *Dual Deltec
304156G 1 1 1 1* 1 1 1 1* TUBE, Turbocharger Oil
305150C 1 1 1 1* 1 1 1 1* FLANGE, Turbocharger Oil Tube
37 305151C 1 1 1 1 1 1 1 1 GASKET, Turbocharger Oil Inlet
38 A305478A 1 1 1 1* 1 1 1 1* TUBE ASM, Oil Drain *Dual Deltec
305478A 1 1 1 1* 1 1 1 1* TUBE, Oil Drain
305150D 1 1 1 1* 1 1 1 1* FLANGE, Oil Drain
39 290393 6 6 2 2 6 6 2 2 SCREW, Hex Head, M10 x 25 mm
291024 1* 1* SCREW, Hex Head, M10 x 50 mm
*Single Deltec, only
40 290478 7 7 SCREW, Hex Head, M10 x 40 mm, Dual
Deltec
41 194769G 1 1 1 1 1 1 1 CONNECTOR, Male, 1/2" OD x 3/8" NPT
42 78208B 1 1 1 1* 1 1 1 1* TEE, Pipe 3/8", *Single Deltec
Continued

FORM 6252 Fifth Edition 75


027.02

W
A
U
65

50

K 64 60 55

E 56
59

S
61

H 66

A
44

47
45 46
43
48

50

58

57

52
53 49
62

54 51

50
63

76 FORM 6252 Fifth Edition


027.02
TURBOCHARGER AND CONNECTIONS
GROUPS 27, 29
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 29 (CONTINUED)
43 305890 1 1 1 1 GASKET, Copper Washer
305197B 1 1 1 1
44 305156 1 1 1 1 1 1 1 1 ADAPTER, Pipe
45 169158 1 1 1 1 1 1 1 1 PLUG, Drain, 3/8"
46 78209D 1 1 1 1 1 1 1 1 COUPLING, Pipe, 3/8"
47 65098D 1 1 PIPE, 3/8" x 2"
65098Y 1 1 1 1 1 1 PIPE, 3/8" x 1-1/2"
48 305151B 1 1 1 1 1 1 1 1 GASKET, Turbocharger Oil Drain
49 350428 2 4 2 4 SCREW, Hex Head, M10 x 22 mm
50 350450 1 1 4 1 4 WASHER, Flat, M10
51 291111 10 10 6 10 10 6 WASHER, Lock, M10
2 2 SINGLE DELTEC
52 194769K 1 1 1 1 1 1 1 1 CONNECTOR, Male
53 304177A 1 1 1 1 DUAL DELTEC, High Speed
304177 1 1 ADAPTER, Pipe
304177B 1 1 SINGLE DELTEC
54 304731 1 1 1 1 1 1 1 1 GASKET, Copper Washer
55 169013P 1 1 1 2 1 1 1 2 CLIP, 1/2" Diameter
169013K 1 CLIP, 3/8" Diameter, Single Deltec
56 177487C 1 1 1 2 1 1 1 2 CLIP, 7/8" Diameter
57 295825 1 1 1 1 NUT, Hex M10
58 26750 1 1 1 1 PLUG, Hex Head Pipe, 1/4"
59 293242 1 2 1 2 WASHER, Flat, M8
60 WS808292 1 2 1 2 SCREW, Hex Head, M8 x 14 mm
61 290617 1 6 1 6 NUT, Hex, M8
62 21051 4 4 WASHER, Spring, 3/8"
63 292842 6 6 SCREW, Hex Head, M10 x 35 mm,
Single Deltec
64 305150G 1 1 FLANGE, Oil Line, Single Deltec
65 290145 2 2 SCREW, Hex Head, M10 x 20 mm
290044 1 1 Single Deltec
66 306015C 1 1 TUBE, Oil Supply, Single Deltec

FORM 6252 Fifth Edition 77


028.00

W 1

A
1
2

U
8 3

K 3

E
6

23

S
32

H
7
9
16

A
17
20
10 19
7 18
15
14

13

12 23
11 22
24
21
26
25
28

30

29

24

23
36
31
5
24 24 34
2 24

25

33

24 31
37
2
5
23
32
4 31

27
31
35

78 FORM 6252 Fifth Edition


028.00
ALTERNATOR
GROUPS 28, 95
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 28
1 44893C 3 3 3 3 3 3 3 3 3 3 SPACER, 7/16" x 3/4" x 1/8" Long
2 291111 7 7 7 7 7 7 7 7 7 7 WASHER, Lock, M10
3 WS177913 3 3 3 3 3 3 3 3 3 3 SCREW, Hex Head, M10 x 85 mm
4 294936 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 45 mm
5 291074 2 2 2 2 2 2 2 2 2 2 NUT, Hex-Thin Jam, M10
6 A305119 1 1 1 1 1 1 1 1 1 1 BELT, Alternator (Set of two)-Assembly
7 292965 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M12 x 130 mm
8 304798L 1 1 1 1 1 1 1 1 1 1 BRACKET, Alternator Adjuster
9 304798U 1 1 1 1 1 1 1 1 1 1 BRACKET, Alternator Adjuster, CSA
10 305367 1 1 1 1 1 1 1 1 1 1 BLOCK, Alternator Adjusting
11 295432 12 12 12 12 12 12 12 12 12 12 SCREW, Socket Head, M12 x 80 mm,
Grade 12.9
305847 12 12 12 12 12 12 12 12 12 12 SCREW, Socket Head, M12 x 130 mm,
Grade 12.9
12 305051 1 1 1 1 1 1 1 1 1 1 PULLEY, Alternator, 2 Groove
13 305047A 1 1 1 1 1 1 1 1 1 1 ROD, Alternator Adjuster
14 Y18813K 1 1 1 1 1 1 1 1 1 1 WASHER, Flat, 1/2"
15 21054 1 1 1 1 1 1 1 1 1 1 WASHER, Lock, 1/2"
16 293242 1 1 1 1 1 1 1 1 1 1 WASHER, Flat, M8
17 290617 1 1 1 1 1 1 1 1 1 1 NUT, Hex Nut, M8
18 21431 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, 1/2"-13 x 1-1/2"
19 207331 3 3 3 3 3 3 3 3 3 3 WIRE, AWG No. 6
20 Y18983D 3 3 3 3 3 3 3 3 3 3 TERMINAL, Wire, 1/2"
21 Y18983B 2 2 2 2 2 2 2 2 2 2 TERMINAL, Wire, No. 10
22 Y18983A 1 1 1 1 1 1 1 1 1 1 TERMINAL, Wire, 1/4"
23 290026 2 2 2 2 2 2 2 2 2 2 NUT, Hex, M12
24 350450 11 11 11 11 11 11 11 11 11 11 WASHER, Flat, M10
25 WS808423 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 100 mm
294946 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 120 mm, CSA
GROUP 95
26 305055B 1 1 1 1 1 1 1 1 1 1 BRACKET, Alternator Mounting
27 305055C 1 1 1 1 1 1 1 1 1 1 BRACKET, Alternator Mounting, CSA
28 305045 1 1 1 1 1 1 1 1 1 1 PULLEY, Alternator
29 69677B 1 1 1 1 1 1 1 1 1 1 ALTERNATOR
69677C 1 1 1 1 1 1 1 1 1 1 ALTERNATOR, CSA
30 ********* 1 1 1 1 1 1 1 1 1 1 NUT, Hex and WASHER, Flatincluded with
Alternator (P/N 69677B/C)
31 290193 2 2 2 2 2 2 2 2 2 2 WASHER, Flat, M12
32 291107 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, M12
33 305056 1 1 1 1 1 1 1 1 1 1 BRACKET, Double Lug Alternator
34 290034 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M12 x 50 mm
35 350924 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M12 x 160 mm
36 294506 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 55 mm
37 290679 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, Full Thread, M10 x 30 mm
Continued

FORM 6252 Fifth Edition 79


028.01

W
A
U
K
E
S
H
A
44
46 38
43

39
47

41
45

42

40

80 FORM 6252 Fifth Edition


028.01
ALTERNATOR CSA JUNCTION BOX
GROUPS 28
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 28
38 211899L 1 1 1 1 1 1 1 1 1 1 BRACKET, Mounting, Junction Box
39 B214117 1 1 1 1 1 1 1 1 1 1 BOX ASSEMBLY, Alternator Junction
40 740272A 1 1 1 1 1 1 1 1 1 1 CABLE, Alternator, 28"
41 153399 1 1 1 1 1 1 1 1 1 1 GROMMET, Rubber
42 169013Z 1 1 1 1 1 1 1 1 1 1 CLIP
43 290679 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 30 mm
44 291111 1 1 1 1 1 1 1 1 1 1 WASHER, Lock, M10
45 294523 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M6 x 20 mm
46 293340 1 1 1 1 1 1 1 1 1 1 WASHER, Lock, M6
47 290452 1 1 1 1 1 1 1 1 1 1 NUT, Hex, M6

FORM 6252 Fifth Edition 81


028.10

W
A
U
1

K
E
5

S 6

H
A
7

2 14
10

15 9

11 8

16 12

13
17

18

82 FORM 6252 Fifth Edition


028.10
CEC 24 VOLT GENERATOR

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 28
1 295825 2 2 2 2 2 2 2 2 2 2 NUT, Hex, M10, Grade 10
2 291111 4 4 4 4 4 4 4 4 4 4 WASHER, Lock, M10
3 740003 1 1 1 1 1 1 1 1 1 1 BATTERY PACK
4 305720A 1 1 1 1 1 1 1 1 1 1 SLEEVE, Flexible Coupling
5 350450 6 6 6 6 6 6 6 6 6 6 WASHER, Flat, M10
6 305145 2 2 2 2 2 2 2 2 2 2 CAPSCREW, Hex Head, M10 x 45 mm,
Grade 10.9
7 740607A 1 1 1 1 1 1 1 1 1 1 GENERATOR, Type I, 24 Volt DC,
Use with Battery Pack
740604A 1 1 1 1 1 1 1 1 1 1 GENERATOR, Type II, 24 Volt DC
8 740206 1 1 1 1 1 1 1 1 1 1 HARNESS, Alternator To Regulator, Type I,
Use with Battery Pack
740206A 1 1 1 1 1 1 1 1 1 1 HARNESS, Alternator To Regulator, Type II
9 106043 1 1 1 1 1 1 1 1 1 1 NUT, Lock , Conduit
10 209611 1 1 1 1 1 1 1 1 1 1 SEAL, Conduit
11 207854 1 1 1 1 1 1 1 1 1 1 ELBOW, Conduit, 90 Degree
12 290452 4 4 4 4 4 4 4 4 4 4 NUT, Hex, M6
13 294952 4 4 4 4 4 4 4 4 4 4 WASHER, Flat, M6
14 305577 1 1 1 1 1 1 1 1 1 1 BRACKET, Voltage Regulator
15 290679 2 2 2 2 2 2 2 2 2 2 CAPSCREW, Hex Head, M10 x 30 mm
16 740600 1 1 1 1 1 1 1 1 1 1 REGULATOR, Voltage, Type I, Use with Battery
Pack
740600A 1 1 1 1 1 1 1 1 1 1 REGULATOR, Voltage, Type II
17 293340 4 4 4 4 4 4 4 4 4 4 WASHER, Lock, M6
18 350442 4 4 4 4 4 4 4 4 4 4 CAPSCREW, Hex Head, M6 x 25 mm,
Full Thread

FORM 6252 Fifth Edition 83


031.00

W
A
U 1

K 2

19 20

E
S
3

H 3

A
5 10

6
7

11
9

14

15 12
13
16

18

17

84 FORM 6252 Fifth Edition


031.00
GOVERNOR WOODWARD PSG AND SG
GROUPS 31, 203
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 31
1 164529K 1 1 1 1 1 1 1 1 1 1 GOVERNOR, (SG with Spacer)
211217D 1 1 1 1 1 1 1 1 1 1 GOVERNOR, (PSG), (Not Illustrated)
211217E 1 1 1 1 1 1 1 1 1 1 GOVERNOR, (PSG with Synchronizing Motor),
(Not Illustrated)
2 290617 4 4 4 4 4 4 4 4 4 4 NUT, Hex, M8
3 120148C 2 2 2 2 2 2 2 2 2 2 GASKET, Governor
4 305435B 1 1 1 1 1 1 1 1 1 1 SPACER, Governor
5 295463 4 4 4 4 4 4 4 4 4 4 STUD, M8 x 45 mm x 55 mm (SG)
291387 4 4 4 4 4 4 4 4 4 4 STUD, M8 x 45 mm x 50 mm (All PSG)
6 305175C 1 1 1 1 1 1 1 1 1 1 COUPLING, Governor Drive (SG)
151995C 1 1 1 1 1 1 1 1 1 1 COUPLING, Governor Drive (All PSG)
7 305181V 1 1 1 1 1 1 1 1 1 1 TUBE, Oil Supply (SG)
305181W 1 1 1 1 1 1 1 1 1 1 TUBE, Oil Supply (All PSG)
8 199111H 1 1 1 1 1 1 1 1 1 1 ELBOW, Male
9 194769N 1 1 1 1 1 1 1 1 1 1 CONNECTOR, Male
10 211436 1 1 1 1 1 1 1 1 1 1 CONNECTOR, Male
11 305867 1 1 1 1 1 1 1 1 1 1 TUBE, Governor Oil Drain
12 199111A 1 1 1 1 1 1 1 1 1 1 ELBOW, Male
13 290039 1 1 1 1 1 1 1 1 1 1 NUT, Hex, M10
14 169013K 1 1 1 1 1 1 1 1 1 1 CLIP
15 350450 1 1 1 1 1 1 1 1 1 1 WASHER, Flat, M10
16 WS809174 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 18 mm, Full Thread
17 291677 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 35 mm
18 305120 1 1 1 1 1 1 1 1 1 1 STRAP, Tube Support
GROUP 203
19 21275 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, 1/4"-20 x 3/4"
20 156339C 1 1 1 1 1 1 1 1 1 1 LEVER, Governor

FORM 6252 Fifth Edition 85


031.10

W 3

A
U
1
4

K 5

E
S 2

H
6

A
10

21 8
20

13
11
12

19

14

15
16
17

18

86 FORM 6252 Fifth Edition


031.10
GOVERNOR WOODWARD EG3P ACTUATOR
GROUPS 31, 203
ITEM PART F18 H24
NO. NUMBER DESCRIPTION
G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 31
1 295464 2 2 2 2 2 2 2 2 2 2 STUD, M8 x 60 mm
2 151995C 1 1 1 1 1 1 1 1 1 1 COUPLING, Governor Drive
3 120148C 1 1 1 1 1 1 1 1 1 1 GASKET, Governor
4 21051 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, 5/16"
5 290617 2 2 2 2 2 2 2 2 2 2 NUT, Hex, M8
6 163853V 1 1 1 1 1 1 1 1 1 1 ACTUATOR, Governor (Woodward EG3P)
163853Y 1 1 1 1 1 1 1 1 1 1 ACTUATOR, Governor (Woodward EG3P,
Shielded Applications - CSA)
7 199111J 1 1 1 1 1 1 1 1 1 1 ELBOW, Male
8 305867A 1 1 1 1 1 1 1 1 1 1 TUBE, Oil Drain
9 199111A 1 1 1 1 1 1 1 1 1 1 ELBOW, Male
10 199111B 1 1 1 1 1 1 1 1 1 1 ELBOW, Male
11 305181Z 1 1 1 1 1 1 1 1 1 1 TUBE, Oil Supply
12 290039 1 1 1 1 1 1 1 1 1 1 NUT, Hex, Grade 10, M10
13 305120 1 1 1 1 1 1 1 1 1 1 STRAP, Tube Support
14 291677 1 1 1 1 1 1 1 1 1 1 SCREW, Hex, Head, M10 x 35 mm
15 169013K 1 1 1 1 1 1 1 1 1 1 CLIP, Tube
16 350450 1 1 1 1 1 1 1 1 1 1 WASHER, Flat, M10
17 WS809174 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 18 mm
18 194769N 1 1 1 1 1 1 1 1 1 1 CONNECTOR, Male
19 208007A 1 1 1 1 1 1 1 1 1 1 PICKUP, Magnetic
168273B 1 1 1 1 1 1 1 1 1 1 PICKUP, Magnetic, CSA
GROUP 203
20 21275 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, 1/4"-20 x 3/4"
21 156339C 1 1 1 1 1 1 1 1 1 1 LEVER, Governor

FORM 6252 Fifth Edition 87


031.20

W 18
24

A
U
17

15

K
19
14

E 20

S
1 16

H
A 13 14

21
6
14
5 16

4
4 7

5 8
23 22
10 9
17

24
14

11

12

88 FORM 6252 Fifth Edition


031.20
GOVERNOR WOODWARD 4024 ACTUATOR
GROUPS 31, 33
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 31
1 305858 1 1 1 1 1 1 1 1 1 1 ACTUATOR, Governor (Woodward 4024)
2 350440 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M8 x 45 mm
3 305490A 1 1 1 1 1 1 1 1 1 1 BRACKET, Actuator Mounting
4 293242 5 5 5 5 5 5 5 5 5 5 WASHER, Flat, M8
5 21051 3 3 3 3 3 3 3 3 3 3 WASHER, Lock, 5/16"
6 294910 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M8 x 35 mm
7 Y18813H 4 4 4 4 4 4 4 4 4 4 WASHER, Flat, 3/8"
8 21052 4 4 4 4 4 4 4 4 4 4 WASHER, Lock, 3/8"
9 21346 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, 3/8-16 x 7/8"
10 290617 2 2 2 2 2 2 2 2 2 2 NUT, Hex, M8
11 208007A 1 1 1 1 1 1 1 1 1 1 PICKUP, Magnetic
12 305857 1 1 1 1 1 1 1 1 1 1 CONTROLLER
GROUP 33
13 211221 1 1 1 1 1 1 1 1 1 1 BUSHING, Splined
14 295367 4 4 4 4 4 4 4 4 4 4 NUT, Elastic Lock
15 305116Z 1 1 1 1 1 1 1 1 1 1 LEVER, Governor
16 350438 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M6 x 40 mm
17 209155 2 2 2 2 2 2 2 2 2 2 WASHER, Flat
A305436F 1 1 1 1 1 1 1 1 1 1 ROD, Governor-Assembly
18 305169 1 1 1 1 1 1 1 1 1 1 ROD END, M6, RH
19 290452 1 1 1 1 1 1 1 1 1 1 NUT, Hex, M6
20 305436F 1 1 1 1 1 1 1 1 1 1 ROD, Governor
21 305180 1 1 1 1 1 1 1 1 1 1 NUT, Hex, M6, LH
22 305169B 1 1 1 1 1 1 1 1 1 1 ROD END, M6, LH
23 305116X 1 1 1 1 1 1 1 1 1 1 LEVER, Throttle
24 350442 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M6 x 25 mm, Full Thread

FORM 6252 Fifth Edition 89


031.30

W
A
U 1

K 2

E
4 3

S
H
A
5

23
7

13
8

9
10
11 16

17

14
12
10

22 13 15
18
5
19
20

21

90 FORM 6252 Fifth Edition


031.30
QUICK START GOVERNOR OIL SUPPLY
GROUPS 31, 71
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 31
1 21273 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, 1/4"-20 x 3/8"
2 21050 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, 1/4"
3 Y18813G 4 4 4 4 4 4 4 4 4 4 WASHER, Flat, 1/4"
4 305924 1 1 1 1 1 1 1 1 1 1 BRACKET, Oil Filler
5 199111B 1 1 1 1 1 1 1 1 1 1 ELBOW, 3/8" x 1/4" NPT
6 305868M 1 1 1 1 1 1 1 1 1 1 TUBE, Crankcase Oil Supply
7 199111A 2 2 2 2 2 2 2 2 2 2 ELBOW, Male
8 B7106B 1 1 1 1 1 1 1 1 1 1 ADAPTER
9 B8677 1 1 1 1 1 1 1 1 1 1 BUSHING, Reducing
10 78208A 2 2 2 2 2 2 2 2 2 2 TEE, Pipe, 1/4"
11 154981B 1 1 1 1 1 1 1 1 1 1 PIPE, 1/4" x 7/8", Threaded Both Ends
12 305923 1 1 1 1 1 1 1 1 1 1 HEAD, Oil Filter
13 194769 2 2 2 2 2 2 2 2 2 2 CONNECTOR, Male
14 290039 1 1 1 1 1 1 1 1 1 1 NUT, Hex, M10
15 305120 1 1 1 1 1 1 1 1 1 1 STRAP, Tube Support
16 169013K 1 1 1 1 1 1 1 1 1 1 CLIP
17 350450 1 1 1 1 1 1 1 1 1 1 WASHER, Flat, M10
18 WS809174 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 18 mm, Full Thread
19 291677 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 35 mm
20 305922 1 1 1 1 1 1 1 1 1 1 FILTER, Governor Oil
21 305868N 1 1 1 1 1 1 1 1 1 1 TUBE, Governor Oil Supply, EG3P Actuator
22 305867K 1 1 1 1 1 1 1 1 1 1 TUBE, Vent
GROUP 71
23 A305648C 1 1 1 1 1 1 1 1 1 1 TUBE, Oil Filler-Assembly

FORM 6252 Fifth Edition 91


033.00

W 6

A
1

U
2
7

K 8

E 4

S 10 3

H
A
11 9

14
12
12
15
13
24
12 29
10 16

17 22
22 27
18

19

8 21

24
22
23
9 4

20 22 23
12
28 21
21
22
22
25 24

5 28

7
21
26
28
22
22 23

24

92 FORM 6252 Fifth Edition


033.00
GOVERNOR LINKAGE

ITEM PART F18 H24


NO. NUMBER DESCRIPTION
G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 33
1 350450 4 4 4 4 4 4 4 4 4 4 WASHER, Flat, M10
2 294506 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, M10 x 55 mm
A305113A 1 1 1 1 1 1 1 1 1 1 SHAFT, Front, Support Bracket-Assembly
A305113B 1 1 1 1 1 1 1 1 1 1 SHAFT, Rear, Support Bracket-Assembly
3 305113A 1 1 1 1 1 1 1 1 1 1 BRACKET, Front, Regulating Shaft
4 168290B 1 1 1 1 1 1 1 1 1 1 BUSHING
5 305113B 1 1 1 1 1 1 1 1 1 1 BRACKET, Rear, Regulating Shaft
6 305102B 1 1 1 1 1 1 1 1 1 1 SHAFT, Regulating, Front
7 78002 4 4 4 4 4 4 4 4 4 4 SPACER
8 292451 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M6 x 30 mm
9 295368 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M6 x 35 mm
10 294952 3 3 3 3 3 3 3 3 3 3 WASHER, Flat, M6
11 305101A 1 1 1 1 1 1 1 1 1 1 LEVER, Regulating Shaft
12 295367 4 4 4 4 4 4 4 4 4 4 NUT, Lock, M6
13 28433 1 1 1 1 1 1 1 1 1 1 PIN, Roll, 1/8" x 7/8"
A305436 1 1 1 1 1 1 1 1 1 1 ROD, Governor-Assembly
14 305169 1 1 1 1 1 1 1 1 1 1 ROD END, M6, Right Hand Thread
15 290452 1 1 1 1 1 1 1 1 1 1 NUT, Hex, M6, Right Hand Thread
16 305436 1 1 1 1 1 1 1 1 1 1 ROD, Threaded, M6
17 305180 1 1 1 1 1 1 1 1 1 1 NUT, Hex, M6, Left Hand Thread
18 305169B 1 1 1 1 1 1 1 1 1 1 ROD END, M6, Left Hand Thread
19 305116 1 1 1 1 1 1 1 1 1 1 LEVER, Governor
20 211221B 1 1 1 1 1 1 1 1 1 1 BUSHING, Splined, 3/8"
C305112 1 1 1 1 1 SHAFT, Regulating-Assembly (Rear)
C305114 1 1 1 1 1 SHAFT, Regulating-Assembly (Rear)
21 21305 8 8 8 8 8 8 8 8 8 8 SCREW, Hex Head, 5/16"-18 x 1/2"
22 21609 12 12 12 12 12 12 12 12 12 12 WASHER, Lock, Shake-proof
23 26786 4 4 4 4 4 4 4 4 4 4 PIN, Roll, 1/8" x 1-1/8"
24 26322 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, 5/16"-18 x 1-1/8"
25 305112 1 1 1 1 1 SHAFT, Regulating, Rear
305114 1 1 1 1 1 SHAFT, Regulating, Rear
26 153272A 2 2 2 2 2 2 2 2 2 2 DISC, Universal Joint
27 153271B 1 1 1 1 1 1 1 1 1 1 SPIDER, Universal Joint
28 153271 3 3 3 3 3 3 3 3 3 3 SPIDER, Universal Joint
29 26786 2 2 2 2 2 2 2 2 2 2 PIN, Roll, 1/8" x 1-1/8"

FORM 6252 Fifth Edition 93


035.00

W
A
U
1

K
2

E
8

6 7

S 3

H
5

A 12
11
4

13

9 10
5 9

6 15

14
16

18

19

17
7

8
14
20
2

94 FORM 6252 Fifth Edition


035.00
INTERCOOLER

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 35
D305464 1 1 1 1 1 1 1 1 INTERCOOLER, Includes Water Elbows,
Gaskets And Fasteners-Assembly
E305464 1 1 1 1 1 1 1 1 INTERCOOLER, High Temperature, For Use
With Water Inlet And Outlet Flanges-Assembly
A305464C 1 1 1 1 INTERCOOLER, High Temperature, HCR,
High Altitude Option
1 305472 1 1 1 1 1 1 1 1 PLENUM, Intercooler Air In
2 290980 45 45 45 45 45 45 45 45 SCREW, Socket Head, M10 x 30 mm
3 305409A 2 2 2 2 2 2 2 2 GASKET, Intercooler Plenum
4 305464 1 1 1 1 1 1 1 1 INTERCOOLER
305464C 1 1 1 1 1 1 1 1 INTERCOOLER, HCR, High Altitude Option
5 305476 2 2 2 2 2 2 2 2 GASKET, Intercooler Cover
6 305422A 2 2 2 2 2 2 2 2 COVER, Intercooler Water
7 304314 2 2 2 2 2 2 2 2 GASKET (Part of P/N D305464)
8 305471E 2 2 2 2 2 2 2 2 ELBOW, Water (Part of P/N D305464)
9 76400 2 2 2 2 2 2 2 2 COCK, Drain, 1/4"
10 305602 1 1 1 1 1 1 1 1 BRACKET, Intercooler
305602B 1 1 BRACKET, Intercooler, HCR, High Altitude
11 305885 1 1 1 1 1 1 1 1 PLATE, Label
12 290477 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 16 mm
13 350450 2 2 2 2 2 2 2 2 WASHER, Flat, M10
14 291111 10 10 10 10 10 10 10 10 WASHER, Lock, M10 (Part of P/N D305464)
15 290393 4 4 4 4 4 4 4 4 SCREW, Socket Head, M10 x 25 mm
16 305470 1 1 1 1 1 1 1 1 PLENUM, Intercooler Air Out
17 290164 3 3 3 3 3 3 3 3 SCREW, Socket Head, M10 x 25 mm
18 290476 32 32 32 32 32 32 32 32 SCREW, Hex Head, M8 x 40 mm
19 26750 2 2 2 2 2 2 2 2 PLUG, Pipe, 1/4"-18 NPT
(Part of P/N D305464)
20 290802 4 4 4 4 4 4 4 4 SCREW, Hex Head, M8 x 25 mm,
(Part of P/N D305464)

FORM 6252 Fifth Edition 95


035.10

W
A
1

U
K
3
4

E 4
2

S
6

H 15

A
5
9
7
16
8

15 10
15

32 16
11
17 12
15

13
31
33 20
14
18
21
19

22
27
16

23
28
24
25
21 26
16
15

29

15

30
4

96 FORM 6252 Fifth Edition


035.10
INTERCOOLER CONNECTIONS

ITEM PART F18 H24


NO. NUMBER DESCRIPTION
G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 35
1 290802 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 28 mm
2 291111 4 4 4 4 4 4 4 4 WASHER, Lock, M10
3 C305203 1 1 1 1 1 1 1 1 FLANGE, Water Outlet - High Temperature-
Assembly
4 304314 3 3 3 3 3 3 3 3 GASKET
5 C305448T 1 1 1 1 1 1 1 1 FLANGE, Water Inlet - High Temperature-
Assembly
6 291677 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 35 mm
7 305830 4 4 4 4 4 4 SCREW, Ferry Head, M8 x 30 mm x 1-1/4"
8 21051 4 4 4 4 4 4 WASHER, Lock, 5/16"
9 305088D 1 1 1 1 1 1 GASKET, Butterfly
305856 1 1 GASKET, Carburetor
10 305407 1 1 1 1 1 1 STRAP
11 290146 2 2 2 2 2 2 SCREW, Hex Head, M12 x 25 mm
12 B363 2 2 2 2 2 2 WASHER, 33/64" x 1"
13 295586 1 1 1 1 1 1 O-RING
14 305423 1 1 1 1 1 1 ELBOW, Intercooler Air Out
305368A 1 1 ELBOW, Intercooler Air Out
15 41236C 8 8 8 8 8 8 8 8 CLAMP, 1-9/16" 2-1/2"
16 117234C 4 4 4 4 4 4 4 4 HOSE, 1-7/8" x 2-1/4" x 2-1/2" Long
17 305127F 1 1 1 1 TUBE, Intercooler to Auxiliary Pump
305127H 1 1 1 1 TUBE, Intercooler to Auxiliary Pump
18 177488D 3 3 3 3 3 3 3 3 CLIP, 1-7/8" Dia. x 3/4"
19 305127E 1 1 1 1 TUBE-Assembly, Oil Cooler to Intercooler
305127G 1 1 1 1 TUBE-Assembly, Oil Cooler to Intercooler
20 350450 1 1 1 1 1 1 1 1 WASHER, Flat, M10
21 291111 3 3 3 3 3 3 3 3 WASHER, Lock, M10
22 290478 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 40 mm
23 21181 2 2 2 2 2 2 2 2 NUT, 5/16" - 18 N.C.
24 B277 2 2 2 2 2 2 2 2 WASHER, Flat, 5/16"
25 305443G 1 1 1 1 1 1 1 1 BRACKET, Intercooler Tube
26 305443 1 1 1 1 1 1 1 1 BRACKET, Intercooler Tube High
Temperature Only
27 154813H 1 1 1 1 1 1 1 1 U-BOLT, 5/16" - 18
28 290393 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 25 mm
29 305130A 1 1 1 1 1 1 1 1 ADAPTER, Hose, 1-7/8" ID x 1-1/2" NPT
30 A305127D 1 1 1 1 TUBE-Assembly
31 WS808394 3 3 3 3 3 3 3 3 SCREW, Hex Head, M8 x 35 mm
32 293242 3 3 3 3 3 3 3 3 WASHER, Flat, M8
33 21051 3 3 3 3 3 3 3 3 WASHER, Lock, M8

FORM 6252 Fifth Edition 97


038.00

W
A 1

U
2

K
3

E
2

S
5

H
A 6

10

9
10

10

11

12

98 FORM 6252 Fifth Edition


038.00
GOVERNOR DRIVE

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 38
C305044B 1 1 1 1 1 1 1 1 1 1 DRIVE, Governor-Assembly
1 294928 1 1 1 1 1 1 1 1 1 1 RING, Retaining
2 305082 2 2 2 2 2 2 2 2 2 2 BEARING, Governor Drive
3 305050 1 1 1 1 1 1 1 1 1 1 SPACER, Bearing
4 117488J 1 1 1 1 1 1 1 1 1 1 RING, Retaining
5 305084C 1 1 1 1 1 1 1 1 1 1 GEAR, Governor Drive
D305083 1 1 1 1 1 1 1 1 1 1 SHAFT, Governor Drive-Assembly
6 305083 1 1 1 1 1 1 1 1 1 1 SHAFT, Governor Drive
7 305044B 1 1 1 1 1 1 1 1 1 1 HOUSING, Governor Drive
8 Y18802 1 1 1 1 1 1 1 1 1 1 PLUG, Pipe, Socket Head, 1/8" NPTF
9 291111 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, M10
10 291677 3 3 3 3 3 3 3 3 3 3 SCREW, Hex Head, M10 x 35 mm
11 304773 1 1 1 1 1 1 1 1 1 1 GASKET, Copper Washer
12 305141C 1 1 1 1 1 1 1 1 1 1 GASKET, Governor Drive Housing

FORM 6252 Fifth Edition 99


041.00

W 1
3

A
2

U
4

K
E
1
2 5
14

S 6 13

H 7 12

A 11

35
8 34

9 15
16
10

32
17

33

19
22
17 29
18 31
16
21 30
20
23

24

27 26 25
28

100 FORM 6252 Fifth Edition


041.00
INTAKE MANIFOLD
GROUPS 16, 41
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 41
1 290679 10 10 10 10 10 16 16 16 16 16 SCREW, Hex Head, M10 x 30 mm
2 291111 10 10 10 10 10 16 16 16 16 16 WASHER, Lock, M10
3 304200E 1 1 1 1 1 1 1 1 1 1 COVER, Intake Manifold Center
4 304201F 1 1 1 1 1 1 1 1 1 1 GASKET, Intake Manifold Cover
5 26750 2 2 2 2 2 4 4 4 4 4 PLUG, Pipe, Hex Head, 1/4"
6 304200G 1 1 1 1 1 2 2 2 2 2 COVER, Intake Manifold
7 304201E 1 1 1 1 1 2 2 2 2 2 GASKET, Intake Manifold Cover
8 304755A 12 12 12 12 12 16 16 16 16 16 O-RING, Intake Manifold
9 350450 12 12 12 12 12 16 16 16 16 16 WASHER, Flat, M10
10 290478 12 12 12 12 12 16 16 16 16 16 SCREW, Hex Head, M10 x 40 mm
11 300441C 1 1 1 1 1 MANIFOLD, Intake
301041C 1 1 1 1 1 MANIFOLD, Intake
305015D 1 1 1 1 MANIFOLD, Intake, HCR, High Altitude
12 290193 6 6 6 6 6 8 8 8 8 8 WASHER, Flat, M12
13 291955 6 6 6 6 6 8 8 8 8 8 SCREW, Hex Head, M12 x 140 mm
14 304215B 1 1 1 1 1 1 1 1 1 1 GASKET, Intake Manifold Elbow
A305015C 1 1 1 1 1 1 1 1 1 1 ELBOW, Intake Manifold-Assembly
15 305015C 1 1 1 1 1 1 1 1 1 1 ELBOW, Intake Manifold
16 167840 2 2 2 2 2 2 2 2 2 2 SEAL, Butterfly Shaft
17 168290A 2 2 2 2 2 2 2 2 2 2 BUSHING, Butterfly Shaft
18 305017A 1 1 1 1 1 1 1 1 1 1 VALVE, Butterfly
19 21606 2 2 2 2 2 2 2 2 2 2 WASHER, Shakeproof, M5
20 292278 2 2 2 2 2 2 2 2 2 2 SCREW, Slotted Head, M5 x 10 mm
21 305018A 1 1 1 1 1 1 1 1 1 1 SHAFT, Butterfly Valve
22 293374 1 1 1 1 1 1 1 1 1 1 PIN, Spring, 6 mm x 25 mm
23 209486 1 1 1 1 1 1 1 1 1 1 SPRING, Compression
24 21130 1 1 1 1 1 1 1 1 1 1 SCREW, Fillister Head, No.10-32 x 1"
25 167824K 1 1 1 1 1 1 1 1 1 1 LEVER, Throttle Stop
26 293340 1 1 1 1 1 1 1 1 1 1 WASHER, Shakeproof, M6
27 292451 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M6 x 30 mm
28 153374F 1 1 1 1 1 1 1 1 1 1 LEVER, Governor
29 26786 1 1 1 1 1 1 1 1 1 1 PIN, Roll, 1/8" x 1-1/8"
30 21050 1 1 1 1 1 1 1 1 1 1 WASHER, Lock, 1/4"
31 21273 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, 1/4"-20 x 5/8"
32 26469 4 4 4 4 4 4 4 4 4 4 SCREW
33 305886 1 1 1 1 1 1 1 1 1 1 PLATE, Label
34 292032 8 8 8 8 8 8 8 8 8 8 SCREW, Hex Head, M8 x 25 mm
35 21051 8 8 8 8 8 8 8 8 8 8 WASHER, Lock, M8
Continued

FORM 6252 Fifth Edition 101


041.01

W
A
U
K
E 36

S 37

H
39

38

40

41

102 FORM 6252 Fifth Edition


041.01
INTAKE MANIFOLD
GROUPS 16, 41
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 16
36 WS809173 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M8 x 18 mm
37 21051 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, M8
38 293242 2 2 2 2 2 2 2 2 2 2 WASHER, Flat, M8
39 305884 1 1 1 1 1 1 1 1 1 1 BRACKET, Label
40 B557A 4 4 4 4 4 4 4 4 4 4 SCREW
41 211853R 1 1 1 1 1 PLATE, Name, Waukesha USA
214145A 1 1 1 1 1 PLATE, Name, Waukesha Europe
211853T 1 1 1 1 1 PLATE, Name, Waukesha USA
214145B 1 1 1 1 1 PLATE, Name, Waukesha Europe

FORM 6252 Fifth Edition 103


042.00

W 12

A
13

27 11

U 9

K 26
29

E
28
3
14

S
2

3 9

H
A 20

24
23 1
22

1
21
21
7
22 9
25
4
16
6

17
7

18 19 9
15

5 10

15

104 FORM 6252 Fifth Edition


042.00
EXHAUST MANIFOLD

ITEM PART F18 H24


NO. NUMBER DESCRIPTION
G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 42
AA300642B 1 MANIFOLD, Exhaust-Assembly
AA300742A 1 1 1 1 MANIFOLD, Exhaust-Assembly
CA300642B 1 MANIFOLD, Exhaust-Assembly
CA300742A 1 1 1 1 MANIFOLD, Exhaust-Assembly
A300742A 1 2 2 2 2 1 2 2 2 2 MANIFOLD, Exhaust-Assembly
1 300742A 1 1 1 1 1 1 1 1 1 1 MANIFOLD, Exhaust
2 304070 3 3 3 3 3 3 3 3 3 3 PLUG, Cup, 1-1/4"
3 168700 4 4 4 4 4 4 4 4 4 4 PLUG, Pipe, 1/4" NPT
4 78282G 1 1 1 1 1 1 1 1 1 1 PLUG, Pipe Square Head-Steel, 1"
A300642B 2 1 1 1 1 3 2 2 2 2 MANIFOLD, Exhaust-Assembly
5 300642B 1 1 1 1 1 1 1 1 1 1 MANIFOLD, Exhaust Water Cooled
6 304070 6 6 6 6 6 6 6 6 6 6 PLUG, Cup, 1-1/4"
7 168700 2 2 2 2 2 2 2 2 2 2 PLUG, Pipe, 1/4" NPT
8 304335C 1 1 1 1 1 1 1 1 1 1 ADAPTER, Thermostat Housing
9 305760C 4 4 4 4 4 5 5 5 5 5 GASKET, Exhaust Manifold
10 305054 18 18 18 18 18 24 24 24 24 24 SCREW, Ferry Head, M12 x 35 mm
11 305804B 1 1 1 1 1 1 1 1 1 1 COVER PLATE, Exhaust Manifold
12 305935 6 6 6 6 6 6 6 6 SCREW, Hex Head, M12 x 25 mm,
Grade 10.9
305934 6 6 SCREW, Hex Head, M12 x 45 mm,
Grade 10.9 (Use with Heat Shield)
13 120132J 6 6 SPACER, .56 x 1" x 5/8"
14 305176B 1 1 SHIELD, Heat
15 78282E 4 4 4 4 4 4 4 4 4 4 PLUG, Pipe Square Head-Steel
16 305481 2 2 2 2 2 2 2 2 PLATE, Cover
17 304314 2 2 2 2 2 2 2 2 GASKET
18 290393 4 4 4 4 4 4 4 4 SCREW, Hex Head, M10 x 25 mm
19 291111 4 4 4 4 4 4 4 4 WASHER, Lock, M10
20 304250B 6 6 6 6 6 8 8 8 8 8 GASKET, Exhaust Manifold
21 292842 24 24 24 24 24 32 32 32 32 32 SCREW, Socket Head, M10 x 35 mm
22 291111 24 24 24 24 24 32 32 32 32 32 WASHER, Lock, M10
23 305793C 6 6 6 6 6 8 8 8 8 8 ELBOW, Water Connection
305793D 6 6 6 6 6 8 8 8 8 8 ELBOW, Water Connection (Includes Flange)
24 305794C 6 6 6 6 6 8 8 8 8 8 GASKET, Water Connection
25 304324C 6 6 6 6 6 8 8 8 8 8 GASKET, Water Manifold
26 305724 12 12 12 12 12 16 16 16 16 16 SCREW, Hex Head, M10 x 50 mm
27 305725 12 12 12 12 12 16 16 16 16 16 SCREW, Hex Head, M10 x 150 mm
28 350450 24 24 24 24 24 32 32 32 32 32 WASHER, Flat, M10
29 291111 24 24 24 24 24 32 32 32 32 32 WASHER, Lock, M10

FORM 6252 Fifth Edition 105


045.00 29

W
28
27

A
25

U 1

K
26
24

E
S
H
2

A
7

23

22

21

15

12 22
19
20

18

14
17 13
16

10 5

11
8

106 FORM 6252 Fifth Edition


045.00
GEAR HOUSING
GROUPS 15, 38, 45, 60, 65, 67, 71
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 45
1 300054C 1 1 1 1 1 1 HOUSING, Gear, Use With Baffle Box Breather
System
300054D 1 1 1 1 1 1 HOUSING, Gear, Use With Gear Housing
Mounted Breather System
290020 2 2 2 2 2 2 2 2 2 2 STUD, M10 x 20 mm
300154 1 1 1 1 1 1 1 1 1 1 HOUSING, Gear, No Water Pump Mounting
2 290679 14 14 14 14 14 14 14 14 14 14 SCREW, Hex Head, M10 x 30 mm
3 301045B 1 1 1 1 1 1 1 1 1 1 COVER, Gear
301145 1 1 1 1 1 1 1 1 1 1 COVER, Gear, No Water Pump Mounting
4 305426 2 2 2 2 2 2 2 2 2 2 PIN, Dowel, M12 x 70 mm
5 294909 9 9 9 9 9 9 9 9 9 9 SCREW, Hex Head, M10 x 90 mm
6 290678 17 17 17 17 17 17 17 17 17 17 SCREW, Hex Head, M10 x 45 mm
7 293195 3 3 3 3 3 3 3 3 3 3 SCREW, Hex Head, M10 x 70 mm
8 304798B 1 1 1 1 1 1 1 1 1 1 COVER, Ignition, Use with Magneto Ignition
9 26730 2 2 2 2 2 2 2 2 2 2 PIN, Roll, Use with CEC Ignition
10 305141D 1 1 1 1 1 1 1 1 1 1 GASKET, Ignition Timing Cover
11 29110A 7 7 7 7 7 7 7 7 7 7 SCREW, Hex Head, M8 x 20 mm
GROUP 71
12 A305648 1 1 1 1 1 1 1 1 1 1 TUBE, Oil Filler-Assembly
13 199415J 1 1 1 1 1 1 1 1 1 1 ELBOW, 2" Radius
14 100834L 1 1 1 1 1 1 1 1 1 1 PIPE, 2" x 1-1/2"
15 305661A 1 1 1 1 1 1 1 1 1 1 GASKET, Oil Filler
16 290803 3 3 3 3 3 3 3 3 3 3 SCREW, Hex Head, M8 x 22 mm
17 21051 3 3 3 3 3 3 3 3 3 3 WASHER, Lock, 5/16"
18 168597 1 1 1 1 1 1 1 1 1 1 CAP, Oil Filler
19 305644 1 1 1 1 1 1 1 1 1 1 PLATE, Chain Retaining
GROUP 60
20 292862 3 3 3 3 3 3 3 3 3 3 SCREW, Hex Head, M10 x 60 mm
21 290044 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 20 mm
22 350450 6 6 6 6 6 6 6 6 6 6 WASHER, Flat, M10
23 300061A 1 1 1 1 1 1 1 1 1 1 COVER, Jacket Water Pump
GROUP 65
24 305141E 1 1 1 1 1 1 1 1 1 1 GASKET, Breather Access
25 305943 1 1 1 1 1 1 1 1 1 1 COVER, Breather Access
26 304733 1 1 1 1 1 1 1 1 1 1 WASHER, Copper Sealing, M10
27 291677 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 35 mm
28 350450 2 2 2 2 2 2 2 2 2 2 WASHER, Flat, M10
29 290039 2 2 2 2 2 2 2 2 2 2 NUT, Hex, M10
Continued

FORM 6252 Fifth Edition 107


045.01

W 42

A
41

U 40 37
38

K
E
S
34 39

H
36
35

A 33
31
30
32

108 FORM 6252 Fifth Edition


045.01
GEAR HOUSING
GROUPS 15, 38, 45, 60, 65, 67, 71
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 67
30 305036B 1 1 1 1 1 1 1 1 1 1 GASKET
31 304798K 1 1 1 1 1 1 1 1 1 1 COVER, Magneto Drive
32 290020 2 2 2 2 2 2 2 2 2 2 STUD, M10 x 32 mm
33 290039 2 2 2 2 2 2 2 2 2 2 NUT, Hex, M10
34 290802 3 3 3 3 3 3 3 3 3 3 SCREW, Hex Head, M10 x 28 mm
GROUP 38
35 305141C 1 1 1 1 1 1 1 1 1 1 GASKET, Governor Drive
36 304874 1 1 1 1 1 1 1 1 1 1 COVER, Governor Drive
37 304773 1 1 1 1 1 1 1 1 1 1 GASKET, Copper Washer
38 291111 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, M10
39 291677 3 3 3 3 3 3 3 3 3 3 SCREW, Hex Head, M10 x 35 mm
GROUP 15
40 305059 1 1 1 1 1 1 1 1 1 1 GASKET
41 304798K 1 1 1 1 1 1 1 1 1 1 COVER, Idler Gear
42 290679 6 6 6 6 6 6 6 6 6 6 SCREW, Hex Head, M10 x 30 mm

FORM 6252 Fifth Edition 109


047.00

W 1

A 2

U 3

K
E
S
H
4

A
5

16

9
8

10
12
11

13
14
15

110 FORM 6252 Fifth Edition


047.00
EXHAUST OUTLET
GROUPS 47, 48, 101
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 48
1 26982 4 4 SCREW, Hex Head, 5/8" - 11 x 2"
2 28349 1 1 WASHER, Stainless Steel, 5/8"
3 304257 1 1 CAP, Shipping, Exhaust Outlet
4 305616 1 1 FLANGE, Exhaust Outlet
5 304256 1 1 GASKET, Exhaust Outlet
6 28419 4 4 WASHER, Thin Lock-Stainless Steel, 5/8"
7 28602 4 4 NUT, Hex, 5/8" - 11
GROUP 47
8 78282E 3 3 PLUG, Pipe, Square Head, 1/2"
9 305613A 1 1 OUTLET, Exhaust Manifold
10 305197C 1 1 GASKET, Copper Washer
11 305643C 1 1 PLUG, Hex Head, M18
12 290679 6 6 SCREW, Hex Head, Stainless Steel,
M10 x 30 mm
13 350450 6 6 WASHER, Flat, M10
14 304258D 1 1 GASKET, Exhaust Manifold Outlet
15 41879A 1 1 COUPLING, 1/2"
GROUP 101
16 304257 1 1 HEAT SHIELD, Exhaust Outlet, Use With
Flange Mounted Shielded Ignition Coils

FORM 6252 Fifth Edition 111


047.10

W
A
U 1

K
2
4

5 6 7

E 9

S 3

H
A
8

10 13

11

16

12

14

15

112 FORM 6252 Fifth Edition


047.10
EXHAUST OUTLET TURBOCHARGED

ITEM PART F18 H24


NO. NUMBER DESCRIPTION
G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 47
1 21348 4 4 4 4 4 4 4 4 CAPSCREW, Hex Head, 3/8" x 1"
21350 4 4 4 4 4 4 4 4 CAPSCREW, Hex Head, 3/8 - 16 x 1"
2 28311 4 4 4 4 4 4 4 4 WASHER, Lock, 3/8"
21052 4 4 4 4 4 4 4 4 WASHER, Lock, 3/8"
3 Y18813H 2 2 2 2 2 2 2 2 WASHER, Flat, 3/8"
28346 2 2 2 2 2 2 2 2 WASHER, Flat, Stainless, 3/8"
4 168013D 1 1 1 1 1 1 1 1 PLATE, Cover
5 168042 1 1 1 1 1 1 1 1 GASKET, Cover Plate
6 207804G 1 1 1 1 1 1 1 1 OUTLET, Exhaust Elbow
207804H 1 1 1 1
7 26128 1 1 1 1 1 1 1 1 PLUG, Pipe, 1/2"
8 305197C 1 1 1 1 1 1 1 1 GASKET, Copper Washer
9 305634C 1 1 1 1 1 1 1 1 PLUG, Hex Head, M18 x 1.5"
10 153402F 1 1 1 1 1 1 1 1 COUPLING, V-Band, 5-1/4"
168334F 1 1 1 1
11 168700 1 1 1 1 1 1 1 1 PLUG, Pipe, 1/4"
12 26536 1 1 1 1 1 1 1 1 PLUG, Pipe, 3/8"
13 304148A 1 1 1 1 1 1 1 1 BRACKET, Heat Shield
14 304148B 1 1 1 1 1 1 1 1 BRACKET, Heat Shield, For Side Discharge,
Exhaust Outlet
15 306059 1 1 1 1 1 1 1 1 SHIELD, Heat, For Side Discharge,
Exhaust Outlet
16 306026 2 2 2 2 2 2 2 2 WASHER

FORM 6252 Fifth Edition 113


053.00

W
A
U 1

K
E 2

S
3
4

H
5

A 4

11

8
7
3

10
6

12

114 FORM 6252 Fifth Edition


053.00
LIFTING DEVICE

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 53
1 304710F 1 1 1 1 1 1 1 1 EYE, Lifting (Rear)
304710D 1 1 EYE, Lifting (Rear)
304710H 1 1 EYE, Lifting (Rear), HCR, High Altitude
2 WS178747 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M12 x 35 mm, Grade 10.9
3 291107 6 8 8 8 8 6 8 8 8 8 WASHER, Lock, M12
4 B363 2 6 6 6 6 2 6 6 6 6 WASHER, Flat, M12, Hardened
5 305666A 1 1 1 1 1 1 1 1 1 1 BRACE, Lifting Eye (Rear)
6 WS178929 2 2 2 2 2 2 2 2 SCREW, Hex Head, M14 x 40 mm, Grade 10.9
7 350425 3 3 3 3 3 3 3 3 3 3 WASHER, Lock, M14
8 304706C 1 1 1 1 1 1 1 1 EYE, Lifting (Front)
304706A 1 1 EYE, Lifting (Front)
9 44566 1 1 1 1 1 1 1 1 1 1 SPACER
10 350460 1 1 1 1 1 1 1 1 1 1 NUT, Hex, M14
11 WS177985 6 6 6 6 6 6 6 6 6 6 SCREW, Hex Head, M12 x 30 mm, Grade 10.9
12 305668 1 1 1 1 1 1 1 1 1 1 BOLT, Body Fit, M14

FORM 6252 Fifth Edition 115


055.00

W
A
U
K 1

E
S
H
A
4 5

2
25

3
24

8
23

10

15
9
14

22 12

19

13

20 25
16
21
11 26
17

18
27

116 FORM 6252 Fifth Edition


055.00
OIL FILTER

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 55
1 304126 3 3 3 3 3 3 3 3 3 3 FILTER, Oil
A304130 1 1 1 1 1 1 1 1 1 1 SUPPORT, Oil Filter-Assembly
2 304131 3 3 3 3 3 3 3 3 3 3 CONNECTION, Oil Filter
3 304130 1 1 1 1 1 1 1 1 1 1 SUPPORT, Oil Filter
4 290235 1 1 1 1 1 1 1 1 1 1 GASKET, Copper Washer, Special
5 290812 1 1 1 1 1 1 1 1 1 1 PLUG, Hex Head, 3/8"
6 304738 1 1 1 1 1 1 1 1 1 1 GASKET, Copper Washer, Special
C304137 1 1 1 1 1 1 1 1 1 1 VALVE, Pressure Regulator-Assembly
7 294929 1 1 1 1 1 1 1 1 1 1 RING, Retaining, M25
8 304136 1 1 1 1 1 1 1 1 1 1 PISTON, Pressure Regulator Valve
9 304195 1 1 1 1 1 1 1 1 1 1 SPRING, Pressure Regulator Valve
10 304137 1 1 1 1 1 1 1 1 1 1 BODY, Pressure Regulator Valve
A304193 1 1 1 1 1 1 1 1 1 1 VALVE, Piston Cooling-Assembly
11 304193 1 1 1 1 1 1 1 1 1 1 BODY, Valve, Piston Cooling
12 304194 1 1 1 1 1 1 1 1 1 1 SPRING, Valve, Piston Cooling
13 304133 1 1 1 1 1 1 1 1 1 1 PISTON, Cooling Valve
14 294932 1 1 1 1 1 1 1 1 1 1 RING, Retaining, M20
15 304740 1 1 1 1 1 1 1 1 1 1 GASKET, Copper Washer
16 304897A 1 1 1 1 1 1 1 1 1 1 PLUG, Hex Socket Head, M36 x 1.5 mm
17 305197B 1 1 1 1 1 1 1 1 1 1 GASKET, Copper Washer, Special
18 290089 1 1 1 1 1 1 1 1 1 1 PLUG, Hex Head, 1/4"
19 304074D 2 2 2 2 2 2 2 2 2 2 PLUG, Hex Socket Head, M30 x 1.5 mm
20 305197B 1 1 1 1 1 1 1 1 1 1 GASKET, Copper Washer
21 304779 1 1 1 1 1 1 1 1 1 1 PLUG, Hex Head, 1/4"
22 304196 1 1 1 1 1 1 1 1 1 1 O-RING, Support to Crankcase
23 294931 2 2 2 2 2 2 2 2 2 2 O-RING, Support to Crankcase, End
24 290393 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, M10 x 25 mm
25 304760 1 1 1 1 1 1 1 1 1 1 O-RING
26 293237 2 2 2 2 2 2 2 2 2 2 STUD, M10 x 37 mm
27 295825 2 2 2 2 2 2 2 2 2 2 NUT, Hex, M10, Grade 10

FORM 6252 Fifth Edition 117


055.10

W 1

A
U
K 2
8

E
S 7

H
A
6

3
5

10

118 FORM 6252 Fifth Edition


055.10
MICROSPIN OIL FILTER

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 55
489300 1 1 1 1 1 1 1 1 1 1 CENTRIFUGE
1 489305 1 1 1 1 1 1 1 1 1 1 O-RING, Cover Nut
2 489304 1 1 1 1 1 1 1 1 1 1 O-RING, Cover
3 489302 1 1 1 1 1 1 1 1 1 1 INSERT, Paper
4 489303 1 1 1 1 1 1 1 1 1 1 O-RING, Rotor
489325 3 3 3 3 3 3 3 3 3 3 ELEMENT, Cleanable
5 489331 1 1 1 1 1 1 1 1 1 1 O-RING, Base
6 489332 1 1 1 1 1 1 1 1 1 1 O-RING, Lower Element
7 489333 1 1 1 1 1 1 1 1 1 1 O-RING, Upper Element
8 489334 1 1 1 1 1 1 1 1 1 1 O-RING, Lid
9 300024B 1 1 1 1 1 1 1 1 1 1 COVER, Connecting Rod with 1/2" NPT Hole
10 207585A 1 1 1 1 1 1 1 1 1 1 VALVE, Ball, 1/2" Dia.
MAINTENANCE KITS
G-962-1620 1 1 1 1 1 1 1 1 1 1 Centrifuge Kit
(Includes Items 1, 2, 3 (4 pieces) and 4)
G-962-1621 1 1 1 1 1 1 1 1 1 1 Element Kit (Includes Items 5, 6, 7 and 8)

FORM 6252 Fifth Edition 119


057.00

W
A
U
K 2

E
1
3

S
H
A
4

7
6

10

11
12

13

120 FORM 6252 Fifth Edition


057.00
FLYWHEEL HOUSING AND BARRING DEVICE
GROUPS 57, 102
ITEM PART F18 H24
NO. NUMBER DESCRIPTION
G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 57
1 300157E 1 1 1 1 1 1 1 1 1 1 HOUSING, Flywheel, SAE
300157F 1 1 1 1 1 1 1 1 1 1 HOUSING, Flywheel, Metric
2 290044 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, M10 x 20 mm
3 B420 2 2 2 2 2 2 2 2 2 2 COVER, Timing
4 OB421A 1 1 1 1 1 1 1 1 1 1 POINTER, Flywheel-Assembly
5 304072 2 2 2 2 2 2 2 2 2 2 PIN, Parallel
6 290804 13 13 13 13 13 13 13 13 13 13 SCREW, Hex Head, M16 x 55 mm
GROUP 102
C151814B 1 1 1 1 1 1 1 1 1 1 PINION, Barring-Assembly
7 151815 1 1 1 1 1 1 1 1 1 1 GEAR, Engine Barring Pin
8 151814B 1 1 1 1 1 1 1 1 1 1 BEARING, Barring Shaft
9 26594 1 1 1 1 1 1 1 1 1 1 PIN, Roll, 1/4" x 1-1/2"
10 B3979 1 1 1 1 1 1 1 1 1 1 SPRING
11 151813 1 1 1 1 1 1 1 1 1 1 SHAFT, Engine Barring
12 Y18814M 3 3 3 3 3 3 3 3 3 3 WASHER, Flat-Plated, 5/8"
13 290047 3 3 3 3 3 3 3 3 3 3 SCREW, Hex Head, M16 x 35 mm

FORM 6252 Fifth Edition 121


060.00

W
A
U
16

K 9

E
27
28

S
H
A
9
3

1
2

26

21

17 20
4
8
18

5
6 7
15 19

30
13
29
11

14

31
12

10
24 25
22
23

122 FORM 6252 Fifth Edition


060.00
JACKET WATER PUMP

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 60
A301060C 1 1 PUMP, Jacket Water-Assembly
AC301060C 1 1 1 1 1 1 1 1 PUMP, Jacket Water-Assembly
C301060C 1 1 1 1 1 1 1 1 PUMP, Jacket Water-Assembly
1 305634 1 1 1 1 1 1 1 1 PLUG, M36
2 304822 1 1 1 1 1 1 1 1 GASKET, Copper Washer
3 301060C 1 1 1 1 1 1 1 1 1 1 BODY, Jacket Water Pump
4 305197C 1 1 1 1 1 1 1 1 1 1 GASKET, Copper Washer
5 304123 1 1 1 1 1 1 1 1 1 1 PLUG, M18
6 304303B 1 1 1 1 1 1 1 1 1 1 NUT, Water Pump Impeller
7 300063 1 1 1 1 1 1 1 1 1 1 IMPELLER, Water Pump
8 305289F 1 1 1 1 1 1 1 1 1 1 SEAL, Water Pump
9 300056K 1 1 SHAFT, Jacket Water Pump,
Use With Auxiliary Water Pump
300056J 1 1 1 1 1 1 1 1 SHAFT, Jacket Water Pump
10 304397 1 1 1 1 1 1 1 1 1 1 SEAL, Viton
11 304079A 1 1 1 1 1 1 1 1 1 1 BEARING, Water Pump
12 294927 1 1 1 1 1 1 1 1 1 1 RING, Retaining, M72
13 304752 1 1 1 1 1 1 1 1 1 1 O-RING, Viton, M90
14 304834A 1 1 1 1 1 1 1 1 1 1 SUPPORT, Water Pump Bearing
15 304835C 1 1 1 1 1 1 1 1 1 1 GEAR, Water Pump Drive
16 305752 1 1 1 1 1 1 1 1 1 1 KEY, 8 mm x 7 mm x 22 mm
17 305751 1 1 1 1 1 1 1 1 1 1 NUT, Jam, Water Pump Pinion
18 304089 1 1 1 1 1 1 1 1 1 1 BEARING, Water Pump
19 294928 1 1 1 1 1 1 1 1 1 1 RING, Retaining, M47
20 304307 1 1 SPACER, Water Pump Bearing
304307A 1 1 1 1 1 1 1 1 SPACER, Water Pump Bearing
21 295537 1 1 1 1 1 1 1 1 NUT, Nylon Insert
22 304308 1 1 SPACER, Water Pump Shaft
23 304436 1 1 WASHER, Water Pump Shaft
24 304437 1 1 NUT, Water Pump Shaft
25 304754 1 1 1 1 1 1 1 1 1 1 O-RING, Nitrile, M100
26 294937 3 3 3 3 3 3 3 3 3 3 STUD, M10 x 65 mm x 77 mm
27 304813 3 3 3 3 3 3 3 3 3 3 STUD, M10 x 1.50 mm
28 295825 8 8 8 8 8 8 8 8 8 8 NUT, Hex, M10, Grade 10
29 304755 1 1 O-RING, Water Pump Cover, M65
30 300061 1 1 COVER, Water Pump
31 292032 4 4 SCREW, Hex Head, M8 x 25 mm
SERVICE REPAIR KITS
G-960-298 1 1 Water Pump Repair Kit
(Includes Items 4 13, 16 20, 22 25,
and 29)
G-960-299 1 1 1 1 1 1 1 1 Water Pump Repair Kit
(Includes Items 4 13, 16 21)

FORM 6252 Fifth Edition 123


061.00

W
A
U
K
E
1

S
2

17
9

H
5
10

A 3
6
7
11
12

8 13

14
16
15

124 FORM 6252 Fifth Edition


061.00
AUXILIARY WATER PUMP

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 61
1 B9129 1 1 1 1 1 1 1 1 COCK, Drain
207482W 1 1 1 1 1 1 1 1 PUMP-Assembly
2 496690 1 1 1 1 1 1 1 1 GASKET SET
3 496880 1 1 1 1 1 1 1 1 NUT, Impeller, Stainless Steel
4 496877 1 1 1 1 1 1 1 1 IMPELLER
5 496881 1 1 1 1 1 1 1 1 KEY, Woodruff, Stainless Steel
6 496858 1 1 1 1 1 1 1 1 SHAFT
7 496177 1 1 1 1 1 1 1 1 SEAL, Mechanical
8 489119 1 1 1 1 1 1 1 1 HOLDER, Spring
9 291677 4 4 4 4 4 4 4 4 SCREW, Hex Head, M10 x 35 mm
10 350450 4 4 4 4 4 4 4 4 WASHER, Flat, M10
11 291111 6 6 6 6 6 6 6 6 WASHER, Lock, M10
12 295825 4 4 4 4 4 4 4 4 NUT, Hex, M10, Grade 10
13 305131A 1 1 1 1 1 1 1 1 FLANGE, Auxiliary Water Pump Mounting
14 167840B 1 1 1 1 1 1 1 1 SEAL, Oil
15 304755 1 1 1 1 1 1 1 1 O-RING
16 350440 4 4 4 4 4 4 4 4 SCREW, Hex Head, M8 x 45 mm
17 496888 1 1 1 1 1 1 1 1 CLAMP
SERVICE REPAIR KITS
G-960-274 Service Repair Kit (Includes Items 2 6)

FORM 6252 Fifth Edition 125


061.10

W
A 1
2 6

U 10

K 3
11
7

E
13
8
14
5 9

S
13
22 16 12
17
14

H
4
20
14

A
15

32 18
31
2 23 20
24
25
26 14 19
21

27 28

33 1
5 27 2
4

24

25 25
35
3
26

34
26 30 5
24 4

25 26
24

25
26
34
26 25
35

27 29
27

126 FORM 6252 Fifth Edition


40 an

061.10
AUXILIARY WATER PUMP CONNECTIONS

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 61
1 78204G 2 2 2 2 2 2 2 2 ELBOW, Pipe, 1-1/2" x 90
2 161694C 3 3 3 3 3 3 3 3 PIPE, 1-1/2" x 2"
3 101023B 2 2 2 2 2 2 2 2 PIPE, 1-1/2" x 4" High Capacity Oil Pan
4 41236C 4 4 4 4 4 4 4 4 CLAMP, Hose
5 117234C 2 2 2 2 2 2 2 2 HOSE, 1-3/4" x 3"
6 A305446 1 1 1 1 1 1 1 1 VALVE, Thermostatic, 120 F (49 C) Assembly
A305446A 1 1 1 1 1 1 1 1 VALVE, Thermostatic, 80 F (26 C) Assembly
7 496884 1 1 1 1 1 1 1 1 SEAL, Thermostat
8 496896 1 1 1 1 1 1 1 1 VALVE, Thermostatic, 120 F (49 C)
496897 1 1 1 1 1 1 1 1 VALVE, Thermostatic, 80 F (26 C)
9 496895 1 1 1 1 1 1 1 1 O-RING
10 21052 4 4 4 4 4 4 4 4 WASHER, Lock, 3/8"
11 21348 4 4 4 4 4 4 4 4 SCREW, Hex Head, 3/8" - 16 x 1"
12 305448N 1 1 1 1 1 1 1 1 ADAPTER, Thermostat-Assembly
13 290039 4 4 4 4 4 4 4 4 NUT, Hex, M10
14 291111 9 9 9 9 9 9 9 9 WASHER, Lock, M10
15 305445 1 1 1 1 1 1 1 1 GASKET, Oil Cooler Tube to
Thermostat Adapter
16 C304679A 1 1 1 1 1 1 1 1 TUBE, Oil Cooler-Assembly
17 304314 1 1 1 1 1 1 1 1 GASKET, Oil Cooler Tube to Oil Cooler
18 290679 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 30 mm
290678 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 45 mm,
High Capacity Oil Pan
19 290393 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 25 mm
20 350450 9 9 9 9 9 9 9 9 WASHER, Flat, M10
21 290478 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 40 mm
291677 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 35 mm,
High Capacity Oil Pan
22 290802 3 3 3 3 3 3 3 3 SCREW, Hex Head, M10 x 28 mm
23 305452A 1 1 1 1 1 1 1 1 BRACKET, Thermostatic Valve
24 21181 8 8 8 8 8 8 8 8 NUT, Hex, 5/16" - 18
25 21051 8 8 8 8 8 8 8 8 WASHER, Lock, 5/16"
26 B277 12 12 12 12 12 12 12 12 WASHER, Flat, 5/16"
27 154813H 2 2 2 2 2 2 2 2 U-BOLT
28 B9129 2 2 2 2 2 2 2 2 COCK, Drain
29 A305127R 1 1 1 1 1 1 1 1 TUBE ASM, Aux Water
30 A305127S 1 1 1 1 1 1 1 1 TUBE ASM, Aux Water,
High Capacity Oil Pan
31 116015M 1 1 1 1 1 1 1 1 TEE, Reducing, 2" x 1-1/2" x 1-1/2"
32 78202Q 1 1 1 1 1 1 1 1 ELBOW, Pipe, 1-1/2" x 90, Street
33 101023K 2 2 2 2 2 2 2 2 PIPE, 1-1/2" x 8"
34 305353E 2 2 2 2 2 2 2 2 BRACKET, Aux Water Tube Supply,
High Capacity Oil Pan
35 WS808394 4 4 4 4 4 4 4 4 SCREW, Hex Head, M8 x 35 mm,
High Capacity Oil Pan

FORM 6252 Fifth Edition 127


064.00 1 2

W
A
3

U
4

K
E
5

S
19
18

H 17 16

A 6

7
9

6 10

12

11

13

14
15

128 FORM 6252 Fifth Edition


064.00
WATER INLET

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 64
1 295825 2 2 2 2 2 2 2 2 2 2 NUT, Hex, M10, Grade 10
2 304318 1 1 1 1 1 1 1 1 1 1 GASKET, Thermostat Housing Outlet
3 304870C 1 1 1 1 1 1 1 1 1 1 CONNECTION, Thermostat Housing Outlet
4 291677 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 35 mm
5 294506 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 55 mm
6 41236K 2 2 2 2 2 2 2 2 2 2 CLAMP, Adjustable Hose
7 15027D 1 1 1 1 1 1 1 1 1 1 HOSE, Water
8 304339 1 1 1 1 1 1 1 1 1 1 CONNECTION, Water Pump Inlet
9 304341 1 1 1 1 1 1 1 1 1 1 GASKET, Water Pump Inlet
10 304329A 1 1 1 1 1 1 1 1 1 1 FLANGE, Jacket Water Pump Inlet
11 304753 1 1 1 1 1 1 1 1 1 1 O-RING, Nitrile
12 WS808400 3 3 3 3 3 3 3 3 3 3 SCREW, Hex Head, M8 x 65 mm
13 78282E 2 2 2 2 2 2 2 2 2 2 PLUG, Square Head, 1/2"-14 NPTF
14 78282F 1 1 1 1 1 1 1 1 1 1 PLUG, Square Head, 3/4"-14 NPTF
15 290803 5 5 5 5 5 5 5 5 5 5 SCREW, Hex Head, M8 x 22 mm
16 78002 1 1 1 1 1 1 1 1 1 1 SPACER
17 169013 1 1 1 1 1 1 1 1 1 1 CLIP
18 350450 1 1 1 1 1 1 1 1 1 1 WASHER, Flat, M10
19 291111 1 1 1 1 1 1 1 1 1 1 WASHER, Lock, M10

FORM 6252 Fifth Edition 129


067.00

W
13
12
11

A 10

U 8

K
6
5 1

E
4
9
36

S 7
35

H
A 27
19

7 26 3
28
2
25
29

8 15 32
31
18 30

17
34

33 16
12

13

21

5 14
24

23

22 20

130 FORM 6252 Fifth Edition


067.00
MAGNETO DRIVE

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 67
A305023B 1 1 1 1 1 1 1 1 1 1 DRIVE, Magneto-Assembly
1 305022C 1 1 1 1 1 1 1 1 1 1 ADAPTER, Magneto Mounting
2 305025E 1 1 1 1 1 1 1 1 1 1 SEAL, Oil
3 290393 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 25 mm
4 A305024E 1 1 1 1 1 1 1 1 1 1 SHAFT, Magneto Drive-Assembly
5 26520 2 2 2 2 2 2 2 2 2 2 KEY, Woodruff, 1/8" x 3/8"
6 159477 1 1 1 1 1 1 1 1 1 1 BEARING, Ball
7 305026A 2 2 2 2 2 2 2 2 2 2 SPACER, Bearing
8 B9641 3 3 3 3 3 3 3 3 3 3 BEARING, Ball
9 118925E 1 1 1 1 1 1 1 1 1 1 RING, Retaining-Beveled
10 305026C 1 1 1 1 1 1 1 1 1 1 SPACER, Bearing
11 305028C 1 1 1 1 1 1 1 1 1 1 GEAR, Magneto-Driven
12 290024 2 2 2 2 2 2 2 2 2 2 WASHER, Tension, M16
13 WS805066 2 2 2 2 2 2 2 2 2 2 NUT, Thin Hex, M16
14 305035B 1 1 1 1 1 1 1 1 1 1 GASKET, Magneto Adapter Mounting
15 305029C 1 1 1 1 1 1 1 1 1 1 GEAR, Magneto-Driver
16 305215A 2 2 2 2 2 2 2 2 2 2 PIN, Dowel
17 305023B 1 1 1 1 1 1 1 1 1 1 HOUSING, Magneto Adapter
18 305026B 1 1 1 1 1 1 1 1 1 1 SPACER, Bearing
19 44999N 1 1 1 1 1 1 1 1 1 1 RING, Retaining, Internal
20 305032A 1 1 1 1 1 1 1 1 1 1 SHAFT, Intermediate-Magneto Drive
21 304638 1 1 1 1 1 1 1 1 1 1 KEY, Woodruff
22 304835B 1 1 1 1 1 1 1 1 1 1 GEAR, Magneto-Primary
23 294955 1 1 1 1 1 1 1 1 1 1 WASHER, Flat, M20
24 293315 1 1 1 1 1 1 1 1 1 1 NUT, Hex, M20
25 305197A 1 1 1 1 1 1 1 1 1 1 GASKET, Copper
26 350956A 1 1 1 1 1 1 1 1 1 1 ADAPTER, Pipe
27 199111N 1 1 1 1 1 1 1 1 1 1 ELBOW, Male
28 305181U 1 1 1 1 1 1 1 1 1 1 TUBE, Oil Supply, Magneto Drive
29 194769N 1 1 1 1 1 1 1 1 1 1 CONNECTOR, Male
30 78208C 1 1 1 1 1 1 1 1 1 1 TEE, Pipe
31 305156B 1 1 1 1 1 1 1 1 1 1 ADAPTER, Pipe
32 305197C 1 1 1 1 1 1 1 1 1 1 GASKET, Copper
33 290679 3 3 3 3 3 3 3 3 3 3 SCREW, Hex Head, M10 x 30 mm
34 305036B 1 1 1 1 1 1 1 1 1 1 GASKET, Magneto Adapter Housing
35 WS177913 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 85 mm
36 291111 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, M10

FORM 6252 Fifth Edition 131


068.00

W
A 33

U
9
34
35

K
36 4

E
S
8
1

H
2

3
37 39
7

A
2

1 38
2

4 40
5 10

6
41
11

12
17
18 16

15 13
19 14

32
22

17
23
16
24
25

A 26
29
7

20

21
28

27 30
31

132 FORM 6252 Fifth Edition


068.00
PRELUBE PUMP WITH HEATER

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 68
D211367 1 1 1 1 1 1 1 1 1 1 PUMP, Prelube (120 VAC 60 HZ) Assembly
G211367 1 1 1 1 1 1 1 1 1 1 PUMP, Prelube (220 VAC, 50HZ) Assembly
1 78204D 2 2 2 2 2 2 2 2 2 2 PIPE ELBOW, Reducing, 3/4" x 90
2 65423Z 3 3 3 3 3 3 3 3 3 3 PIPE, 3/4" x 1-1/2"
3 177053B 1 1 1 1 1 1 1 1 1 1 VALVE, Check
4 168439J 2 2 2 2 2 2 2 2 2 2 PIPE ELBOW, Reducing, 3/4" to 1/2"
5 100831W 1 1 1 1 1 1 1 1 1 1 PIPE, 1/2" x 1-1/2"
6 211367 1 1 1 1 1 1 1 1 1 1 PUMP, Prelube
7 B277 8 8 8 8 8 8 8 8 8 8 WASHER, Flat, 5/16"
8 21309 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, 5/16" - 18 x 3/4"
9 100831J 1 1 1 1 1 1 1 1 1 1 PIPE, 1/2" x 3"
10 211381 1 1 1 1 1 1 1 1 1 1 WIRE, AWG, No. 12, Green
11 208527G 2 2 2 2 2 2 2 2 2 2 TERMINAL, Wire, No. 6
12 954864A 2 2 2 2 2 2 2 2 2 2 CONNECTOR, Wire
13 208527F 3 3 3 3 3 3 3 3 3 3 TERMINAL, Wire, No. 10
14 211380 1 1 1 1 1 1 1 1 1 1 WIRE, AWG, No. 12, Black
15 211377A 1 1 1 1 1 1 1 1 1 1 BASE, Prelube Pump
16 106043 2 2 2 2 2 2 2 2 2 2 NUT, Lock , Conduit
17 207854A 2 2 2 2 2 2 2 2 2 2 ELBOW, Conduit
18 207637P 1 1 1 1 1 1 1 1 1 1 CONDUIT, Flexible
19 21100 2 2 2 2 2 2 2 2 2 2 SCREW, Round Head, No. 10-24 x 1/2"
20 21051 4 4 4 4 4 4 4 4 4 4 WASHER, Lock, 5/16"
21 21181 4 4 4 4 4 4 4 4 4 4 NUT, Hex, 5/16" - 18
22 954841 1 1 1 1 1 1 1 1 1 1 BOX, Outlet
23 Y18813E 2 2 2 2 2 2 2 2 2 2 WASHER, Flat, No. 10
24 21049 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, No. 10
25 21261 2 2 2 2 2 2 2 2 2 2 NUT, Hex, No. 10-24
26 211432 1 1 1 1 1 1 1 1 1 1 COVER, Outlet Box
27 211428A 1 1 1 1 1 1 1 1 1 1 SWITCH, Toggle, Momentary On
28 26096 2 2 2 2 2 2 2 2 2 2 SCREW, Round Head, No. 8-32 x 3/8"
29 957068F 1 1 1 1 1 1 1 1 1 1 PLATE, Name - Prelube Pump
30 956469E 1 1 1 1 1 1 1 1 1 1 PLATE, On-Off Name
31 26763 4 4 4 4 4 4 4 4 4 4 SCREW, Round Head, No. 4 x 3/16"
32 211900 1 1 1 1 1 1 1 1 1 1 LABEL, Danger, Electrical Source
33 78209F 1 1 1 1 1 1 1 1 1 1 COUPLING, Pipe, 3/4"
34 B6280 1 1 1 1 1 1 1 1 1 1 BUSHING, Reducing, 3/4" to 3/8"
35 305156 1 1 1 1 1 1 1 1 1 1 ADAPTER, Pipe, M14 to 3/8"
36 305197B 1 1 1 1 1 1 1 1 1 1 GASKET, Copper Washer
37 153462A 1 1 1 1 1 1 1 1 1 1 STRAINER
38 100832J 2 2 2 2 2 2 2 2 2 2 PIPE, 3/4" x 2"
39 48797T 1 1 1 1 1 1 1 1 1 1 BUSHING, Reducing, 1" to 3/4"
40 78208E 1 1 1 1 1 1 1 1 1 1 TEE, Pipe, 3/4"
41 78282F 1 1 1 1 1 1 1 1 1 1 PLUG, Pipe, Square Head

FORM 6252 Fifth Edition 133


068.10

W
18
16 17
19

A
18
17

U
15

K
1
2
14 20

E
18
4 17

S
3 21

1 13

H
A
7 12 22

18
17
10
5 4
11 23
6
24
3
25

8 26

10

9
27

28

29

27

30

31

134 FORM 6252 Fifth Edition


068.10
PRELUBE PUMP WITH HEATER

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 68
A211367 1 1 1 1 1 1 1 1 1 1 PUMP, Prelube with Preheater
(120 VAC, 60 HZ) Assembly
F211367 1 1 1 1 1 1 1 1 1 1 PUMP, Prelube with Preheater
(240 VAC, 60 HZ) Assembly
E211367A 1 1 1 1 1 1 1 1 1 1 PUMP, Prelube with Preheater
(110 VAC, 50 HZ) Assembly
D211367A 1 1 1 1 1 1 1 1 1 1 PUMP, Prelube with Preheater
(220 VAC, 50 HZ) Assembly
1 78204D 2 2 2 2 2 2 2 2 2 2 ELBOW, 3/4" x 90
2 209255M 1 1 1 1 1 1 1 1 1 1 VALVE, Solenoid, Two Way N.O.
(120 VAC) (Part of P/N A211367, P/N E211367A)
209255P 1 1 1 1 1 1 1 1 1 1 VALVE, Solenoid, Two Way N.O.
(240 VAC) (Part of P/N F211367, P/N D211367A)
3 100832J 2 2 2 2 2 2 2 2 2 2 PIPE, 3/4" x 2"
4 78208E 2 2 2 2 2 2 2 2 2 2 TEE, Pipe, 3/4"
5 209255U 1 1 1 1 1 1 1 1 1 1 VALVE, Solenoid, Two Way N.C.
(120 VAC) (Part of P/N A211367, P/N E211367A)
211653A 1 1 1 1 1 1 1 1 1 1 VALVE, Solenoid, Two Way N.C.
(240 VAC) (Part of P/N F211367, P/N D211367A)
6 117053B 1 1 1 1 1 1 1 1 1 1 VALVE, Check
7 119483E 1 1 1 1 1 1 1 1 1 1 PIPE, 3/4" x 3"
8 48797H 1 1 1 1 1 1 1 1 1 1 BUSHING, Reducing, 1-1/2" to 3/4"
9 78282J 1 1 1 1 1 1 1 1 1 1 PLUG, Pipe, Square Head, 1-1/2"
10 116015A 2 2 2 2 2 2 2 2 2 2 TEE, Pipe, 1-1/2"
11 209151K 1 1 1 1 1 1 1 1 1 1 PIPE, 1-1/2" x 10-1/2"
12 48797L 1 1 1 1 1 1 1 1 1 1 BUSHING, Reducing, 1-1/2" to 1"
13 211368C 1 1 1 1 1 1 1 1 1 1 SWITCH, Temperature
14 78209G 1 1 1 1 1 1 1 1 1 1 PIPE, Hex, 1" X 3"
15 48797T 1 1 1 1 1 1 1 1 1 1 BUSHING, Reducing, 1" to 3/4"
16 199111M 1 1 1 1 1 1 1 1 1 1 ELBOW, Male
17 106043 2 2 2 2 2 2 2 2 2 2 NUT, Lock, Conduit
18 207854A 9 9 9 9 9 9 9 9 9 9 ELBOW, Conduit
19 207637R 1 1 1 1 1 1 1 1 1 1 CONDUIT, Flexible, 5"
20 194628G 1 1 1 1 1 1 1 1 1 1 PIPE, Hex, 1/2"
21 207637U 1 1 1 1 1 1 1 1 1 1 CONDUIT, Flexible, 3-1/2"
22 P276090 2 2 2 2 2 2 2 2 2 2 WASHER, Reducing, 3/4" - 1/2"
23 161160L 1 1 1 1 1 1 1 1 1 1 HEATER, Lube Oil, (120/240 VAC)
24 48797G 1 1 1 1 1 1 1 1 1 1 BUSHING, Reducing, 1-1/2" to 1-1/4"
25 211367 1 1 1 1 1 1 1 1 1 1 PUMP, Prelube, 120/240 VAC, 60 HZ
211367A 1 1 1 1 1 1 1 1 1 1 PUMP, Prelube, 110/220 VAC, 50 HZ
26 21309 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, 5/16" - 18 x 3/4"
27 B277 8 8 8 8 8 8 8 8 8 8 WASHER, Flat 5/16"
28 73654L 1 1 1 1 1 1 1 1 1 1 PIPE, 1/2" x 2-1/2"
29 168439J 2 2 2 2 2 2 2 2 2 2 ELBOW, Reducing 3/4" x 1/2"
30 21051 4 4 4 4 4 4 4 4 4 4 WASHER, Lock, 5/16"
31 21181 4 4 4 4 4 4 4 4 4 4 NUT, Hex, 5/16" - 18
Continued

FORM 6252 Fifth Edition 135


068.11

W
A
U
K
E
S
32

H
A 33

32

38
34

35

36

37

136 FORM 6252 Fifth Edition


068.11
PRELUBE PUMP WITH HEATER

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
32 801140 4 4 4 4 4 4 4 4 4 4 PIPE, 3/4" x 1-1/2"
33 176247 2 2 2 2 2 2 2 2 2 2 U-BOLT
34 211377 1 1 1 1 1 1 1 1 1 1 BASE, Prelube Pump
35 Y18813G 4 4 4 4 4 4 4 4 4 4 WASHER, Flat, 1/4"
36 21050 4 4 4 4 4 4 4 4 4 4 WASHER, Lock, 1/4"
37 21173 4 4 4 4 4 4 4 4 4 4 NUT, Hex, 1/4"-20
38 211900 1 1 1 1 1 1 1 1 1 1 LABEL, Danger-Electrical Source

FORM 6252 Fifth Edition 137


068.20

W 1

A
2 6

U
3 5 7
4

K
8

E 17
12

S
13
11 14
9
18 10 16

H
19

A 20
A
B

15

21

26
22 27

31
A
29
B 24
25 28 27
32
26
33
37
38
23 30
24

26
27
34
41 38
35
39
40
36

138 FORM 6252 Fifth Edition


068.20
PRELUBE PUMP CONTROLS

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 68
1 78209F 1 1 1 1 1 1 1 1 1 1 COUPLING, Pipe, 3/4"
2 B6280 1 1 1 1 1 1 1 1 1 1 BUSHING, Reducing, 3/4" to 3/8"
3 305156 1 1 1 1 1 1 1 1 1 1 ADAPTER, Pipe, M14 to 3/8"
4 305197B 1 1 1 1 1 1 1 1 1 1 GASKET, Copper Washer
5 162557 1 1 1 1 1 1 1 1 1 1 NUT, Wire
6 211381 2 2 2 2 2 2 2 2 2 2 WIRE, AWG, No. 12, Green
7 208527G 10 10 10 10 10 10 10 10 10 10 TERMINAL, Wire, No. 6
8 954864A 2 2 2 2 2 2 2 2 2 2 CONNECTOR, Wire
9 208527F 4 4 4 4 4 4 4 4 4 4 TERMINAL, Wire, No. 10
10 161944K 2 2 2 2 2 2 2 2 2 2 DISCONNECT, Female
11 211380 2 2 2 2 2 2 2 2 2 2 WIRE, AWG, No. 12, Black
12 Y18994B 4 4 4 4 4 4 4 4 4 4 TERMINAL, Wire, No. 8
13 194769E 1 1 1 1 1 1 1 1 1 1 CONNECTOR, Male
14 69746 1 1 1 1 1 1 1 1 1 1 SWITCH, Oil Pressure
15 211900 1 1 1 1 1 1 1 1 1 1 PLATE, Name, Danger-Electrical Source
16 211895X 1 1 1 1 1 1 1 1 1 1 TUBE, Pressure Sensing
17 199111J 1 1 1 1 1 1 1 1 1 1 ELBOW, Male
18 78212F 1 1 1 1 1 1 1 1 1 1 BUSHING, Reducing, 3/4" to 1/4"
19 211537Y 1 1 1 1 1 1 1 1 1 1 TUBE, Pump to Heater
20 194769P 1 1 1 1 1 1 1 1 1 1 CONNECTOR, Male
21 168439J 1 1 1 1 1 1 1 1 1 1 ELBOW, Reducing 3/4" to 1/2"
22 73654L 1 1 1 1 1 1 1 1 1 1 PIPE, 1/2" x 2-1/2"
23 21102 2 2 2 2 2 2 2 2 2 2 SCREW, Round Head, No. 10-24 x 5/8"
24 Y18813E 2 2 2 2 2 2 2 2 2 2 WASHER, Flat, No. 10
25 199066C 1 1 1 1 1 1 1 1 1 1 CLIP, Tube
26 207854A 5 5 5 5 5 5 5 5 5 5 ELBOW, Conduit
27 106043 9 9 9 9 9 9 9 9 9 9 NUT, Lock , Conduit
28 207855A 1 1 1 1 1 1 1 1 1 1 CONNECTOR, Conduit
29 207637V 1 1 1 1 1 1 1 1 1 1 CONDUIT, Flexible, 5.5"
30 207637U 1 1 1 1 1 1 1 1 1 1 CONDUIT, Flexible, 2.5"
31 954841 1 1 1 1 1 1 1 1 1 1 BOX, Outlet
32 21261 2 2 2 2 2 2 2 2 2 2 NUT, Hex, No. 10-24
33 211384D 1 1 1 1 1 1 1 1 1 1 COVER, Outlet Box
34 26096 2 2 2 2 2 2 2 2 2 2 SCREW, Round Head, No. 8-32 x 3/8"
35 211428B 1 1 1 1 1 1 1 1 1 1 SWITCH, Toggle
36 207637P 1 1 1 1 1 1 1 1 1 1 CONDUIT, Flexible, 22"
37 48797T 1 1 1 1 1 1 1 1 1 1 BUSHING, Reducing, 1" to 3/4"
38 100832J 2 2 2 2 2 2 2 2 2 2 PIPE, 3/4" x 2"
39 78208E 1 1 1 1 1 1 1 1 1 1 TEE, Pipe, 3/4"
40 78282F 1 1 1 1 1 1 1 1 1 1 PLUG, Pipe, Square Head, 3/4"
41 153462A 1 1 1 1 1 1 1 1 1 1 STRAINER

FORM 6252 Fifth Edition 139


070.00 3

W 1
4 2

A
5
2

U
K
3

12 11

E 6

S
H 8

A
7

13
2 8
3

14
1

15 10
16

5 18
23
19

27 18
17 18
19
19
22

20

27

29 28

30 18

19 31

21 26 25 24
32
19

33

140 FORM 6252 Fifth Edition


070.00
CRANKCASE BREATHER OPEN

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 70
1 290617 4 4 4 4 4 4 4 4 NUT, Hex, M8
2 21051 8 8 8 8 8 8 8 8 WASHER, Lock, 5/16"
3 293242 8 8 8 8 8 8 8 8 WASHER, Flat, M8
4 305640 1 1 1 1 1 1 1 1 BRACKET, Tube Support
5 290803 6 6 6 6 6 6 6 6 SCREW, Hex Head, M8 x 22 mm
6 305669 1 1 1 1 1 1 1 1 TUBE, Separator Inlet
7 159166D 1 1 1 1 1 1 1 1 HOSE, 2-3/8" ID x 2" Long
8 41236K 4 4 4 4 4 4 4 4 CLAMP, Hose, 2-11/16" x 2-1/2"
41236D 4 4 4 4 4 4 4 4 CLAMP, Hose, 2-11/16" x 3"
High Capacity Oil Pan
9 A305671 1 1 1 1 1 1 1 1 TUBE, Separator Inlet-Assembly
High Capacity Oil Pan
10 295614 1 1 1 1 1 1 1 1 U-BOLT, M8 x 72 mm x 80 mm
11 159166E 1 1 1 1 1 1 1 1 HOSE, 2-3/8" ID x 3" Long
12 305655 1 1 1 1 1 1 1 1 CAP, Breather Inlet
13 161541F 1 1 1 1 1 1 1 1 SEPARATOR, Vortox-Assembly
14 305654 1 1 1 1 1 1 1 1 CLAMP, Band
15 305639 1 1 1 1 1 1 1 1 BRACKET, Separator Support
16 194769 1 1 1 1 1 1 1 1 CONNECTOR, Male, 3/8" OD
17 305181R 1 1 1 1 1 1 1 1 TUBE, Breather Drain, Upper
18 169013K 2 2 2 2 4 4 4 4 CLIP
19 291111 2 2 2 2 6 6 6 6 WASHER, Lock, M10
20 291677 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 35 mm
21 199108C 1 1 1 1 1 1 1 1 UNION, Tube, 3/8" OD
22 305181T 1 1 1 1 TUBE, Breather Drain, Lower
305181S 1 1 1 1 TUBE, Breather Drain, Lower (Not Illustrated)
23 305868X 1 1 1 1 TUBE, Breather Drain, Lower,
High Capacity Oil Pan
305868W 1 1 1 1 TUBE, Breather Drain, Lower,
High Capacity Oil Pan
24 199111N 1 1 1 1 1 1 1 1 ELBOW, Male, 3/8" OD x 1/2" NPT,
High Capacity Oil Pan
25 78209E 1 1 1 1 1 1 1 1 COUPLING, Pipe, 1/2",
High Capacity Oil Pan
26 119434W 1 1 1 1 1 1 1 1 PIPE, Tube, 1/2" x 1/8",
High Capacity Oil Pan
27 290802 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 28 mm
28 199111B 1 1 1 1 1 1 1 1 ELBOW, Male, 3/8" OD
29 WS809174 2 2 2 2 SCREW, Hex Head, M10 x 18 mm
30 350450 2 2 2 2 WASHER, Flat, M10
31 168847W 2 2 2 2 STRAP
32 290478 2 2 2 2 SCREW, Hex Head, M10 x 40 mm
33 290039 2 2 2 2 NUT, Hex, M10

NOTE: The GLD model in this table uses the IMPCO carburetor.

FORM 6252 Fifth Edition 141


070.10

W
A
U 1

K
E 3 4

S
H
A
2

6 5

10
6
7 7
8

6 4

9
11
13

7 14

14
12

6 15

15
4 3 16

16
17

20

18 19

142 FORM 6252 Fifth Edition


070.10
CRANKCASE BREATHER, G

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 70
1 168904 1 1 TUBE, Turn
2 41236C 6 6 CLAMP, Hose
3 20751B 2 2 HOSE
4 111380 3 3 U-BOLT
5 305942C 1 TUBE, Separator Outlet
211411D 1 TUBE, Separator Outlet
6 Y18813H 6 6 WASHER, Flat, 3/8"
7 21050 6 6 WASHER, Lock, 1/4"
8 21173 6 6 NUT, Hex, 1/4"-20 NC
9 305632 1 1 BRACKET, Pipe Support
10 290803 2 2 CAPSCREW, Hex Head, M8 x 22 mm
11 305642 1 1 BRACKET, Tube Clip
12 304701V 1 BRACKET, Tube Support
304701M 1 BRACKET, Tube Support
13 304701L 1 1 BRACKET, Tube Support
14 305428 4 4 CAPSCREW, Hex Head, M10 x 22 mm,
Full Thread
15 291111 6 4 WASHER, Lock, M10
16 350450 4 4 WASHER, Flat, M10
17 A211411C 1 1 TUBE ASSEMBLY, Air Cleaner Inlet
18 294952 4 4 WASHER, Flat, M6
19 305846 1 1 GASKET, Air Cleaner Inlet
20 295825 2 2 NUT, Hex, M10, Grade 10

NOTE: For use with Baffle Box Breather Systems.

FORM 6252 Fifth Edition 143


070.20

W
A
U 1

K 2

E
S 3

H
6
5

A 7
9
8

6
12
10 19
13
8 20

14 11 21
17
18
3 22
16
20

19

15

144 FORM 6252 Fifth Edition


070.20
CRANKCASE BREATHER CLOSED GLD

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 70
1 154813H 1 1 U-BOLT, 5/16"-18
2 305283C 1 1 TUBE, Separator Outlet
3 41236C 3 3 CLAMP, Hose 1-9/16" 2-1/2"
4 28311 1 1 NUT, Hex, Stainless Steel, 3/8"-24
5 Y18813H 2 2 WASHER, Flat, 3/8"
6 177488F 2 2 CLIP, 2" Dia. x 3/8"
7 21189 1 1 NUT, Hex, 3/8"-16, NC
8 21052 2 2 WASHER, Lock, 3/8"
9 304701R 1 1 BRACKET, Clip Support
10 Y18813H 2 2 WASHER, Flat, 3/8"
11 21340 1 1 SCREW, Hex Head, 3/8"-16 x 5/8"
12 21346 1 1 SCREW, Hex Head, 3/8"-16 x 7/8"
13 295825 2 2 NUT, Hex, M10, Grade 10
14 29111 2 2 WASHER, Lock, M10
15 305846 1 1 GASKET
16 A305283B 1 1 TUBE, Air Cleaner Inlet-Assembly
17 20751B 1 1 HOSE, 2" x 2-3/8" x 3"
18 305632A 1 1 BRACKET, Separator Tube Support
19 B277 4 4 WASHER, Flat, 5/16"
20 21051 4 4 WASHER, Lock, 5/16"
21 21181 2 2 NUT, Hex, 5/16"
22 290803 2 2 SCREW, Hex Head, M8 x 22 mm

NOTE: For use with Baffle Box Breather System and Impco 600DVI Carburetor.

FORM 6252 Fifth Edition 145


070.30 1

W 2

A 3
4

U
2

K
2

E 14

S
16
15 6

H
17
7
18
8

A
10
19
11

12
20

22 9
13

21

23 11
24
26
10 25

29

30

28

27

37 31

32
38
35
34
33

34 36

35

146 FORM 6252 Fifth Edition


070.30
CRANKCASE BREATHER EJECTOR CLOSED

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 70
1 A305283J 1 1 TUBE, Seperator Outlet Assembly
2 41236C 3 3 CLAMP, Hose
3 20751B 1 1 HOSE, 2" ID x 3"
4 154813H 1 1 U-BOLT
5 305283Y 1 TUBE, Separator Outlet
6 290039 4 4 NUT, Hex, M10
305283Z 1 TUBE, Separator Outlet
7 291111 4 4 WASHER, Lock, M10
8 350450 4 4 WASHER, Flat, M10
9 305632B 1 1 BRACKET, Pipe Support
10 293242 4 4 WASHER, Flat, M8
11 21051 4 4 WASHER, Lock, 5/16"
12 21181 2 2 NUT, Hex, 5/16"-18
13 290803 2 2 SCREW, Hex Head, M8 x 22 mm
14 100832J 1 1 PIPE, 3/4" x 2"
A166990C 1 1 REGULATOR, Vacuum-Assembly
15 166990C 1 1 HOUSING, Vacuum Regulator
A166993D 1 1 VALVE, Vacuum Regulator-Assembly
16 166991A 1 1 ROD, Vacuum Regulator
17 166993D 1 1 HUB, Vacuum Regulator
18 211032B 1 1 DISC, Vacuum Regulator Valve
19 211595 1 1 RING, Retaining
20 118013K 1 1 O-RING, Vacuum Regulator
21 166992A 1 1 SCREEN, Vacuum Regulator
22 211750 1 1 FILTER, Air
23 177381A 1 1 NUT, Lock - Elastic Stop - Plated, 5/16"-24
24 209195A 1 1 GASKET, Exhaust Flange
25 F209190 1 1 FLANGE, Pipe Adapter Assembly
26 176247 1 1 U-BOLT
27 209788 1 1 EJECTOR, Breather
28 290478 4 4 SCREW, Hex Head, M10 x 40 mm
29 168042 1 1 GASKET, Exhaust Inlet Flange
30 C211136A 1 1 FLANGE, Exhaust Inlet - Assembly
31 161694C 1 1 PIPE, 1-1/2" x 2"
32 78204G 1 1 ELBOW, 1-1/2" x 90
33 28332 2 2 SCREW, Hex Head, 3/8"-16 x 1-1/4"
28352 2 2 SCREW, Hex Head, 1/4"-20 x 1"
21350 2 2 SCREW, Hex Head, 3/8"-16 x 1-1/8"
34 21052 4 4 WASHER, Lock, 3/8"
35 Y18813H 4 4 WASHER, Flat, 3/8"
36 305646D 1 1 BRACKET, Ejector Support
37 Y18813G 2 2 WASHER, Flat, 1/4"
38 21050 2 2 WASHER, Lock, 1/4"
Continued

FORM 6252 Fifth Edition 147


070.31

W
A
U
K
E
S
H
A

45

43

41
44

46

47

42

39

40

148 FORM 6252 Fifth Edition


070.31
CRANKCASE BREATHER EJECTOR CLOSED

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
39 21173 2 2 NUT, Hex, 1/4"-20 UNC
40 26969 2 2 SCREW, Hex Head, 3/8"-16 x 1"
41 199111N 1 ELBOW, Male, 3/8"
199111M 1 ELBOW, Male, 3/4"
42 78212G 1 BUSHING, Reducing, 3/4" to 1/2"
43 305181L 1 TUBE, Turbocharger to Ejector
305478B 1 TUBE, Turbocharger to Ejector
44 194769A 1 CONNECTOR, Male
194769P 1 CONNECTOR, Male
45 207585H 1 VALVE, Ball
207585J 1 VALVE, Ball
46 118566X 1 PIPE, 3/8" x 1"
119483T 1 PIPE, 3/4" x 1-3/8"
47 78212K 1 BUSHING, Reducing, 1" to 3/8"
48797T 1 BUSHING, Reducing, 1" to 3/4"

NOTE: For use with Baffle Box Breather System.

FORM 6252 Fifth Edition 149


070.40

W 1

A
3

U
4

35

K
2

E
4
5

S
3

32 6

H
7

A
31

8 34

33

3
A A
30

10

12

11
13

28
14
3
29
4
27
16 14
17 15
18
10
25 19

20

19
26

24 23
3

9 4
21
14 22

150 FORM 6252 Fifth Edition


070.40
CRANKCASE BREATHER GSID

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 70
1 305846 1 1 GASKET, Air Cleaner Inlet
2 305942A 1 1 TUBE, Closed Breather-Upper
3 350450 10 10 WASHER, Flat, M10
4 290039 8 8 NUT, Hex, M10
5 207585F 1 1 VALVE, Ball, 2"
6 305942B 1 1 TUBE, Closed Breather-Lower
7 41236C 2 2 CLAMP, Hose, 2-9/16" x 3-1/2"
8 161541F 1 1 SEPARATOR, Oil
9 290679 4 4 CAPSCREW, Hex Head, M10 x 30 mm
10 194769E 2 2 CONNECTOR, Male
11 305867J 1 1 TUBE, Separator Drain
12 305639A 1 1 BRACKET, Oil Separator Support
13 A305669A 1 TUBE, Separator Inlet, Lower-Assembly
A305669B 1 TUBE, Separator Inlet, Lower-Assembly
14 291111 6 6 WASHER, Lock, M10
15 350428 2 2 CAPSCREW, Hex Head, Full Thread,
M10 x 22 mm
16 WS809173 1 1 CAPSCREW, Hex Head, M8 x 18 mm
17 169013 1 1 CLIP
18 207317B 1 1 CLIP
19 21051 3 3 WASHER, Lock, 5/16"
20 290617 1 1 NUT, Hex, M8
21 305867E 1 1 TUBE, Breather Drain
22 199110B 1 1 TEE, Male
23 350890B 1 1 ADAPTER, 1/8" NPT
24 21181 2 2 NUT, Hex, 5/16"-18 NC
25 B277 2 2 WASHER, Flat, 5/16"
26 305371C 1 1 BRACKET, Oil Separator Inlet Tube
27 154813J 1 1 U-BOLT
28 41236K 2 2 CLAMP, Hose, 1-9/16" x 2-1/2"
29 159166D 1 1 HOSE
30 305669D 1 1 TUBE, Oil Separator Inlet, Upper-Assembly
31 118013F 1 1 O-RING
32 26750 1 1 PLUG, Hex Head, 1/4" NPT
33 305851A 1 1 RETAINER, Breather Adapter
34 119055 1 1 TUBE, Open Breather
35 305655 1 1 CAP, Open Breather

NOTE: For use with Gear Housing P/N 300054D.

FORM 6252 Fifth Edition 151


070.50 1

W 3
2

A
U 7
4

K
5

6 36
1

E
4

S
8
33

H
35
31

32 9

A 34

11
10

A 4 A

12
14
5

29

26 5

30 1
27 23 15

22

21
29
25
20 13
20
12 19

24
4

11
1 18 17
28
16
5

152 FORM 6252 Fifth Edition


070.50
CRANKCASE BREATHER GL

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 70
1 290039 8 8 NUT, Hex, M10
2 305846 1 1 GASKET, Air Cleaner Inlet
3 A305283X 1 1 TUBE, Closed Breather-Upper
4 350450 8 8 WASHER, Flat, M10
5 291111 8 8 WASHER, Lock, M10
6 291677 2 2 CAPSCREW, Hex Head, M10 x 35 mm
7 207585F 1 1 VALVE, Ball, 2"
8 A305942 1 1 TUBE, Breather To Air Cleaner
9 41236C 1 1 CLAMP, Hose, 2-9/16" x 3-1/2"
10 161541F 1 1 SEPARATOR, Oil
11 290679 4 4 CAPSCREW, Hex Head, M10 x 30 mm
12 194769E 2 2 CONNECTOR, Male
13 305867J 1 1 TUBE, Separator Drain
14 290393 2 2 CAPSCREW, Hex Head, M10 x 25 mm
15 305639B 1 1 BRACKET, Oil Separator Support
16 350890B 1 1 ADAPTER, 1/8" NPT
17 199110B 1 1 TEE, Male
18 305867E 1 1 TUBE, Breather Drain
19 290617 1 1 NUT, Hex, M8
20 21051 3 3 WASHER, Lock, 5/16"
21 207317B 1 1 CLIP, Tube, 2-7/16" Dia.
22 169013 1 1 CLIP, Tube, 1/4" Dia.
23 WS809173 2 2 CAPSCREW, Hex Head, M8 x 18 mm
24 21181 2 2 NUT, Hex, 5/16"-18 NC
25 B277 2 2 WASHER, Flat, 5/16"
A305669B 1 TUBE, Separator Inlet, Lower-Assembly
26 A305669A 1 TUBE, Separator Inlet, Lower-Assembly
27 154813J 1 1 U-BOLT
28 305371C 1 1 BRACKET, Oil Separator Inlet Tube
29 41236K 2 2 CLAMP, Hose, 1-9/16" x 2-1/2"
30 159166D 1 1 HOSE
31 305669D 1 1 TUBE, Oil Separator Inlet, Upper-Assembly
32 118013F 1 1 O-RING
33 26750 1 1 PLUG, Hex Head, 1/4" NPT
34 305851A 1 1 RETAINER, Breather Adapter
35 119055 1 1 TUBE, Open Breather
36 305655 1 1 CAP, Open Breather

NOTE: For use with Gear Housing P/N 300054D.

FORM 6252 Fifth Edition 153


070.60

W 2

A
3

U
1

K 35

E
17 1

S
25

33

H
34
32

A
31 4

A 6 7

5 A

30

12

9 11

10
23 13

28 20

29 27
19

18

22 10
17
10

12
16
24
14
21
25
17

26 8 15

154 FORM 6252 Fifth Edition


070.60
CRANKCASE BREATHER GLD DELTEC

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 70
1 41236C 3 CLAMP, Hose, 2-9/16" x 3-1/2"
2 20751B 1 HOSE
3 305283S 1 TUBE, Breather To Air Cleaner
4 161541F 1 SEPARATOR, Oil
5 305654 1 CLAMP, Band, Oil Separator
6 290617 2 NUT, Hex, M8
7 290044 2 CAPSCREW, Hex Head, M8 x 20 mm
8 291111 8 WASHER, Lock, M10
9 306013 1 BRACKET, Oil Separator Support
10 21051 3 WASHER, Lock, 5/16"
11 WS808292 2 CAPSCREW, Hex Head, M8 x 14 mm
12 194769E 1 CONNECTOR, Male
13 305867F 1 TUBE, Separator Drain
14 350890B 1 ADAPTER, 1/8" NPT
15 199110B 1 TEE, Male
16 305867E 1 TUBE, Breather Drain
17 290039 8 NUT, Hex, M10
18 177488F 2 CLIP, Tube, 2"
19 169013 2 CLIP, Tube, 1/4"
20 WS809174 2 CAPSCREW, Hex Head, M10 x 18 mm
21 21181 2 NUT, Hex, 5/16"-18 NC
22 B277 2 WASHER, Flat, 5/16"
23 A211411Z 1 TUBE, Separator Inlet, Lower-Assembly
24 305371C 1 BRACKET, Oil Separator Inlet Tube
25 350450 4 WASHER, Flat, M10
26 290679 2 CAPSCREW, Hex Head, M10 x 30 mm
27 154813J 1 U-BOLT
28 41236K 2 CLAMP, Hose, 1-9/16" x 2-1/2"
29 159166D 1 HOSE
30 305669D 1 TUBE, Oil Separator Inlet, Upper-Assembly
31 118013F 1 O-RING
32 26750 1 PLUG, Hex Head, 1/4" NPT
33 305851A 1 RETAINER, Breather Adapter
34 119055 1 TUBE, Open Breather
35 305655 1 CAP, Open Breather

NOTE: For use with Gear Housing P/N 300054D.

FORM 6252 Fifth Edition 155


070.70 3 10

W 2
11

A
12

U
13

4
A

K 14

E
5

S 1

H
6 7 3

A
8

9
1
15

18 16

19

17
36 A
20
1
3
21
30
23

22
1
3 24
26
34

25
26
27 35
27
8 8
28
29 29
30
32

31

33

156 FORM 6252 Fifth Edition


070.70
CRANKCASE BREATHER GLD DELTEC

ITEM PART F18 H24


NO. NUMBER DESCRIPTION
G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 70
1 41236C 10 10 CLAMP, Hose
2 AA306010K 1 1 TUBE, Valve Housing
3 20751B 5 5 HOSE
4 292862 4 4 SCREW, M10 x 60 mm
5 306027A 1 1 GASKET, Breather Valve
6 A306010J 1 1 TUBE, Breather
7 290575 4 4 WASHER, Flat, M10
8 291111 8 8 WASHER, Lock, M10
9 290039 4 4 NUT, Hex, M10
10 E161541B 1 1 SEPARATOR, Oil
11 290541 2 2 CAPSCREW, Hex Head, M8 x 16 mm
12 21051 2 2 WASHER, Lock, 5/16"
13 305654 1 1 CLAMP, Band, Oil Separator
14 290617 2 2 NUT, Hex, M8
15 306016 1 1 TUBE, Breather
16 294909 2 2 CAPSCREW, Hex Head, M10 x 90 mm
17 290679 2 2 CAPSCREW, Hex Head, M10 x 30 mm
18 A306010E 1 1 TUBE, Breather-Assembly
19 Y18802 1 1 PLUG, Square Head, 1/8" - 27" NPT
20 306027 1 1 GASKET, Breather Tube
21 304773 4 4 GASKET, Copper Washer
22 290039 2 2 NUT, Hex, M10
23 154813H 2 2 U-BOLT
24 A306009N 1 TUBE, Breather-Assembly
A306009P 1 TUBE, Breather-Assembly
25 306014 1 1 BRACKET, Breather
26 169013P 3 3 CLIP
27 28357 4 4 WASHER, Flat, Stainless Steel, 3/8"
28 21052 4 4 WASHER, Lock, 3/8"
29 21181 4 4 NUT, Hex, 5/16"-18 NC
30 290393 4 4 CAPSCREW, Hex Head, M10 x 25 mm
31 306017C 1 1 COUPLING
32 306015N 1 1 TUBE, Breather Drain
33 306018C 1 1 COUPLING
34 306015L 1 TUBE, Breather Drain
306015M 1 TUBE, Breather Drain
35 305443K 1 1 BRACKET, Oil Drain
36 306019C 1 1 COUPLING

NOTE: This breather system is for use with gear housings without water pump provision.

FORM 6252 Fifth Edition 157


070.80

W
A 21

U
17

20

K
E
1
5
2

S
27 13 20

H 18

A
12
19

16 3

28 4

11
13
12
15 10
6
7

8
24 4
7
12
4
22
4 14
5 9
25 26

23

26 4

158 FORM 6252 Fifth Edition


070.80
CRANKCASE BREATHER GL

ITEM PART F18 H24


NO. NUMBER DESCRIPTION
G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 70
1 41236R 4 CLAMP, Hose
41236C 4
2 A305232M 1 TUBE, Assembly, Separator Inlet
305232M 1 TUBE, Separator Inlet
A305954 1 TUBE, Assembly, Separator Inlet
305954 1 TUBE, Separator Inlet
3 105675 2 HOSE, 1-1/2" ID x 2-5/8" Long
7044 2 HOSE, 1-1/4" ID x 2-1/2" Long
4 305955 1 SEPARATOR, Oil (Includes check valve,
305955A 1 drain hose, filter element and 2 barbed hose/pipe
connectors)
5 290617 4 NUT, Hex, M8
290039 2 6 NUT, Hex, M10
6 21051 6 2 WASHER, Medium Lock, M8
7 293242 4 WASHER, Flat, M8
8 290476 4 SCREW, Hex Head, M8 x 40 mm
290478 4 SCREW, Hex Head, M10 x 40 mm
9 305949 1 1 BRACKET, Oil Separator
10 151270H 2 2 SPACER, 2-7/16"
11 305953 2 2 SCREW, Hex Head, M10 x 120 mm,
Grade 10.9
12 350450 6 6 WASHER, Flat, M10
13 291111 6 10 WASHER, Lock, M10
14 119901K 2 2 SPACER, 2-1/4"
15 296375 2 2 SCREW, Hex Head, M8 x 90 mm, Grade 10.9
16 118013F 1 1 O-RING, Nitrile, Oil Separator Inlet Tube
17 305851A 1 1 RETAINER, Breather Adapter
18 A305232N 1 TUBE, Assembly, Separator Outlet
305232N 1 TUBE, Separator Outlet
305954G 1 TUBE, Assembly, Separator Outlet
305954A 1 TUBE, Separator Outlet
19 290678 2 2 SCREW, Hex Head, M10 x 45 mm
20 305846 2 2 GASKET, Air Cleaner Inlet
21 A305954B 1 1 TUBE, Assembly, Air Duct
305954B 1 1 TUBE, Air Duct
22 305156 1 ADAPTER, Pipe
23 78208B 1 1 TEE, Pipe
24 28543 1 1 PLUG, Pipe, 3/8"
25 78212A 1 BUSHING, Reducing
26 109263 2 2 CLAMP, Hose
27 26750 2 2 PLUG, Pipe, Hex Head, M10, extra plug is used for
previous crankcase oil drain fitting during retrofit
28 489604* 1 FILTER, Replacement Element
489605 1 *used with European F18 & H24 Oil Separators

FORM 6252 Fifth Edition 159


070.90

W
A
U
6

K
8

E 20

S
18
5
12
1
17

H 27
2

A 3

29
6
31
19

16
3
28 4 21

11
13
12

15 10
6
7

8
30
4
24 7
12
4
22
4 14
26 5 9
25
23

26 4

160 FORM 6252 Fifth Edition


070.90
CRANKCASE BREATHER GSID, GLD
CLOSED
ITEM PART F18 H24
NO. NUMBER DESCRIPTION
G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 70
1 41236R 4 4 CLAMP, Hose
41236C 4 4
2 A305232U 1 1 TUBE, Assembly, Separator Inlet
A305954K 1 1
3 105675 2 2 HOSE, 1-1/2" ID x 2-5/8" Long
7044 2 2 HOSE, 1-1/4" ID x 2-1/2" Long
4 305955 1 1 SEPARATOR, Oil (Includes check valve,
305955A 1 1 drain hose, filter element and 2 barbed hose/pipe
connectors)
5 290617 6 6 NUT, Hex, M8
290039 2 2 6 6 NUT, Hex, M10
6 21051 14 14 8 8 WASHER, Medium Lock, M8
7 293242 6 6 WASHER, Flat, M8
8 290476 4 4 SCREW, Hex Head, M8 x 40 mm
290478 4 4 SCREW, Hex Head, M10 x 40 mm
9 305949B 1 1 1 1 BRACKET, Oil Separator
10 151270H 2 2 2 2 SPACER, 2-7/16"
11 305953 2 2 2 2 SCREW, Hex Head, M10 x 120 mm,
Grade 10.9
12 350450 4 4 8 8 WASHER, Flat, M10
13 291111 2 2 6 6 WASHER, Lock, M10
14 119901K 2 2 2 2 SPACER, 2-1/4"
15 296375 2 2 2 2 SCREW, Hex Head, M8 x 90 mm, Grade 10.9
16 118013F 1 1 1 1 O-RING, Nitrile, Oil Separator Inlet Tube
17 305851A 1 1 1 1 RETAINER, Breather Adapter
18 AA305232Y 1 1 TUBE, Assembly, Separator Outlet
AA305232Z 1 1
19 21181 2 2 2 2 NUT, Hex, 5/16"-18 UNC
20 305445R 1 1 1 1 GASKET, Breather
21 B277 2 2 2 2 WASHER, Flat, 5/16"
22 305156 1 1 1 1 ADAPTER, Pipe
23 78208B 1 1 1 1 TEE, Pipe
24 28543 1 1 1 1 PLUG, Pipe, 3/8"
25 78212A 1 1 1 1 BUSHING, Reducing
26 109263 2 2 2 2 CLAMP, Hose
27 26750 2 2 2 2 PLUG, Pipe, Hex Head, M10, extra plug is used for
previous crankcase oil drain fitting during retrofit
28 489604* 1 1 FILTER, Replacement Element
489605 1 1 *used with European F18 & H24 Oil Separators
29 307076A 1 1 BRACKET, Tube Support
307076 1 1
30 305890 1 1 1 1 WASHER, Copper
31 154813B 1 1 1 1 U-BOLT

FORM 6252 Fifth Edition 161


072.00

W
A
U
1

K
E
S
H 2

A
7
3

8
5 9

13
6
3

2
10

11
12

14

15

16

162 FORM 6252 Fifth Edition


072.00
BUTTERFLY VALVE HOUSING

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 72
1 305855 1 1 1 1 1 1 1 1 1 1 GASKET, Throttle Outlet
C305016A 1 1 1 1 1 HOUSING, Butterfly Valve-Assembly
C305016B 1 1 1 1 1 HOUSING, Butterfly Valve-Assembly, High
Speed
A305016D 1 1 1 1 1 HOUSING, Butterfly Valve-Assembly, Low
Speed
A305016E 1 HOUSING, Butterfly Valve-Assembly, Use with
Impco 400VF Carb
A305016H 1 1 1 1 1 HOUSING, Butterfly Valve-Assembly, Use with
Impco 400VF Carb, 81 mm ID
2 167840 2 2 2 2 2 2 2 2 2 2 SEAL, Butterfly Shaft
3 168290A 2 2 2 2 2 2 2 2 2 2 BUSHING, Butterfly Shaft
4 292278 2 2 2 2 2 2 2 2 2 2 SCREW, Slotted Head, M5 x 10 mm
5 21606 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, Shakeproof, No. 10
6 305017D 1 1 1 1 1 VALVE, Butterfly, 81 mm dia.
305017C 1 1 1 1 1 VALVE, Butterfly, 70 mm dia.
305017E 1 1 1 1 1 VALVE, Butterfly, 63 mm dia.
7 305018C 1 1 1 1 1 1 1 1 1 1 SHAFT, Butterfly Valve
305018G 1 SHAFT, Butterfly Valve, Use With
P/N 305016E Housing
8 21130 1 1 1 1 1 1 1 1 1 1 SCREW, Fillister Head, No. 10-32 x 1"
9 209486 1 1 1 1 1 1 1 1 1 1 SPRING, Compression
10 292451 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M6 x 30 mm
11 293340 1 1 1 1 1 1 1 1 1 1 WASHER, Lock, M6
12 167824K 1 1 1 1 1 1 1 1 1 1 LEVER, Throttle Stop
13 293106 1 1 1 1 1 1 1 1 1 1 PIN, Spring, 6 mm x 28 mm
14 26786 1 1 1 1 1 1 1 1 1 1 PIN, Roll, 1/8" x 1-1/8"
15 305016A 1 1 1 1 1 HOUSING, Butterfly Valve, 81 mm ID
305016B 1 1 1 1 1 HOUSING, Butterfly Valve, 70 mm ID
305016D 1 1 1 1 1 HOUSING, Butterfly Valve, 63 mm ID
305016E 1 HOUSING, Butterfly Valve, Use With
Impco 400VF Carb
305016F 1 HOUSING, Butterfly Valve, Angled, Use With
Impco 400VF Carb
16 290393 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, M10 x 25 mm

FORM 6252 Fifth Edition 163


079.00

W 1
2

A
U
4

K
E
S
7
3

H
A 6

10

12

11

14

13

164 FORM 6252 Fifth Edition


079.00
WATER HEADER

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 79
1 304619E 1 1 1 1 1 1 1 1 1 1 HEADER, Water, Rear
2 304316 6 6 6 6 6 8 8 8 8 8 GASKET, Water Manifold
3 291484 3 3 3 3 3 3 3 3 3 3 SCREW, Socket Head, M8 x 70 mm
4 304618D 1 1 1 1 1 2 2 2 2 2 HEADER, Water, Center
5 294911 9 9 9 9 9 12 12 12 12 12 SCREW, Hex Head, M8 x 75 mm
6 293982 12 12 12 12 12 16 16 16 16 16 SCREW, Hex Head, M8 x 30 mm
7 304617B 1 1 1 1 1 1 1 1 1 1 HEADER, Water, Front
8 304323 1 1 1 1 1 1 1 1 1 1 COCK, Drain
9 153402P 4 4 4 4 4 6 6 6 6 6 CLAMP, Hose, 3-3/64" x 3-9/32"
10 15027D 2 2 2 2 2 3 3 3 3 3 HOSE, Water, 2-3/4" x 3-1/4" x 3"
11 41236A 2 2 2 2 2 2 2 2 2 2 CLAMP, Hose, 3" x 4"
12 304322A 1 1 1 1 1 1 1 1 1 1 HOSE, Water
13 306043 1 1 1 1 1 HEADER, Water,
High Temperature-Assembly
306043A 1 1 1 1 1 HEADER, Water,
High Temperature-Assembly
14 294916 24 24 24 24 24 32 32 32 32 32 SCREW, Socket Head, M8 x 25 mm

FORM 6252 Fifth Edition 165


080.00

W
A 2 1

U
K
E
S
H
A 2 1
10

7
9

5 8
6
4
3
1
11

28 12
2
27

26
26
25 13

24 14
16
23
17

19
29

21
13

15

17

22 18

20

166 FORM 6252 Fifth Edition


080.00
OIL PUMP

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 80
1 290679 6 6 6 6 6 6 6 6 6 6 SCREW, Socket Head, M10 x 25 mm
2 291111 6 6 6 6 6 6 6 6 6 6 WASHER, Lock, M10
3 305700E 1 1 1 1 1 1 1 1 1 1 GASKET, Oil Pump Outlet
4 304110B 1 1 1 1 1 1 1 1 1 1 ELBOW, Oil Pump Outlet
5 305625 1 1 1 1 1 1 1 1 1 1 O-RING, Viton
6 304738 1 1 1 1 1 1 1 1 1 1 GASKET, Copper Washer
A304135A 1 1 1 1 1 1 1 1 1 1 VALVE, Pressure Relief-Assembly
7 294929 1 1 1 1 1 1 1 1 1 1 RING, Retainer, M25
8 304136 1 1 1 1 1 1 1 1 1 1 PISTON, Pressure Relief Valve
9 304109 1 1 1 1 1 1 1 1 1 1 SPRING, Pressure Relief Valve
10 304135A 1 1 1 1 1 1 1 1 1 1 BODY, Pressure Relief Valve
AA300180 1 1 1 1 1 PUMP, Oil-Assembly
AA301280 1 1 1 1 1 PUMP, Oil-Assembly
A300180 1 1 1 1 1 PUMP, Oil-Assembly
A301280 1 1 1 1 1 PUMP, Oil-Assembly
11 304639 2 2 2 2 2 2 2 2 2 2 PIN, Dowel, w/Internal Thread
12 300180 1 1 1 1 1 BODY, Oil Pump
301280 1 1 1 1 1 BODY, Oil Pump
13 304328C 2 2 2 2 2 2 2 2 2 2 BUSHING, Oil Pump Shaft
14 300081B 1 1 1 1 1 GEAR, Oil Pump-Driver
301081 1 1 1 1 1 GEAR, Oil Pump-Driver
15 300085A 1 1 1 1 1 GEAR, Oil Pump-Driven
301085C 1 1 1 1 1 GEAR, Oil Pump-Driven
16 304090 1 1 1 1 1 1 1 1 1 1 KEY, Woodruff
A301182A 1 1 1 1 1 1 1 1 1 1 COVER, Oil Pump-Assembly
17 304328C 2 2 2 2 2 2 2 2 2 2 BUSHING, Oil Pump Shaft
18 301182A 1 1 1 1 1 1 1 1 1 1 COVER, Oil Pump
19 304639 2 2 2 2 2 2 2 2 2 2 PIN, Dowel, w/Internal Thread
20 290393 10 10 10 10 10 10 10 10 10 10 SCREW, Hex Head, M10 x 25 mm
21 301051C 1 1 1 1 1 1 1 1 1 1 GEAR, Oil Pump Drive
22 304112A 1 1 1 1 1 1 1 1 1 1 NUT, Oil Pump Shaft
23 350486 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M14 x 90, Grade 10.9
24 304833A 1 1 1 1 1 1 1 1 1 1 SPACER, Oil Pump Idler
25 294927 1 1 1 1 1 1 1 1 1 1 RING, Retainer, M72
26 304078A 2 2 2 2 2 2 2 2 2 2 BEARING, Oil Pump Idler
27 301115C 1 1 1 1 1 1 1 1 1 1 GEAR, Intermediate Oil Pump
28 301016A 1 1 1 1 1 1 1 1 1 1 SHAFT, Intermediate Idler
29 290724 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, M12 x 45 mm
Continued

FORM 6252 Fifth Edition 167


080.01

W
A 50

32

U
36

K
30
49

E
36 31

S
45
34
48 40

H 46

A 47

44
30
39
33
36

42

35

43 37

42

41 38

168 FORM 6252 Fifth Edition


080.01
OIL PUMP

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
30 305700D 2 2 2 2 2 2 2 2 2 2 GASKET, Suction Tube
A304104C 1 1 1 1 1 1 1 1 1 1 BELL, Suction-Assembly
31 304105B 1 1 1 1 1 1 1 1 1 1 STRAINER, Suction Bell
32 304104C 1 1 1 1 1 1 1 1 1 1 BELL, Suction
33 293166 6 6 6 6 6 6 6 6 6 6 SCREW, Hex Head, M6 x 12 mm
34 305700F 1 1 1 1 1 1 1 1 1 1 GASKET, Oil Discharge Tube
35 294916 8 8 8 8 8 8 8 8 8 8 SCREW, Socket Head, M8 x 25 mm
High Capacity Oil Pan
36 21051 8 8 8 8 8 8 8 8 8 8 WASHER, Lock, M8
High Capacity Oil Pan
37 C304186C 1 1 1 1 1 1 1 1 1 1 TUBE, Oil Pump Discharge-Assembly
38 304745A 2 2 2 2 2 2 2 2 2 2 O-RING, Viton
39 C304103B 1 1 1 1 1 1 1 1 1 1 TUBE, Oil Suction-Assembly
40 304103E 1 1 1 1 1 1 1 1 1 1 TUBE, Oil Suction-Assembly
High Capacity Oil Pan
41 WS218182 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, M8 x 22 mm, Grade 10.9
42 304597 4 4 4 4 4 4 4 4 4 4 WASHER, Serrated Tension
43 304106B 1 1 1 1 1 1 1 1 1 1 SUPPORT, Oil Inlet Pipe
44 294524 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, M8 x 25 mm
45 290803 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M8 x 20 mm
High Capacity Oil Pan
46 293242 4 4 4 4 4 4 4 4 4 4 WASHER, Flat, M8,
High Capacity Oil Pan
47 WS808406 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M8 x 110 mm,
High Capacity Oil Pan
48 304106C 1 1 1 1 1 1 1 1 1 1 SUPPORT, Oil Inlet Pipe,
High Capacity Oil Pan
49 305946 2 2 2 2 2 2 2 2 2 2 CLAMP, Support Block,
High Capacity Oil Pan
50 295433 2 2 2 2 2 2 2 2 2 2 NUT, Elastic Lock Hex, M8,
High Capacity Oil Pan
SERVICE REPAIR KITS
G-980-166 1 1 1 1 1 Oil Pump Repair Kit
G-980-167 1 1 1 1 1 Oil Pump Repair Kit

FORM 6252 Fifth Edition 169


085.00

W 1

A
2
3
15 14 13

U
8

4
1

K
32

E
6

S
10
31
12
16

H
7
5

A
17 9
33
11

18

29 28

19

27
30

20
26

24

21

25
23 22

170 FORM 6252 Fifth Edition


085.00
AIR/FUEL MODULE CEC

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 85
1 740017 1 1 1 1 INSULATION, O2 Sensor Block
2 A740106D 1 1 1 1 1 1 SENSOR-Assembly
3 740226 1 1 1 1 1 1 HARNESS, Rich Burn AFM O2 Sensor
4 194929 1 1 1 1 1 1 CONNECTOR, Thermocouple
5 A740112 1 1 1 1 1 1 THERMOCOUPLE, Repair End-Assembly
6 448167 1 1 1 1 1 1 1 1 1 1 WIRE, Thermocouple Lead, 25
F211477C 1 1 1 1 SENSOR, Heated Oxygen-Assembly
7 A740112 1 1 1 1 THERMOCOUPLE, K-Type-Assembly
8 194929B 1 1 1 1 CONNECTOR, Thermocouple
9 21310 2 2 2 2 SCREW, Hex Head, 5/16"-18 x 3/4" Long
10 21631 2 2 2 2 WASHER, Internal Lock, 5/16"
11 A740107A 1 1 1 1 SENSOR, Lean Burn Oxygen-Assembly
12 740021 1 1 1 1 GASKET, Oxygen Sensor
13 211477C 1 1 1 1 TEE, Special
14 211476D 1 1 1 1 NIPPLE, Special
15 305197C 1 1 1 1 WASHER, Copper
16 26204 2 2 2 2 PLUG, Pipe, Socket Head, 1/4" Brass
17 A740012D 1 1 1 1 CARTRIDGE, Heater-Assembly
18 A740222D 1 1 1 1 HARNESS, Lean Burn AFM O2
Sensor Assembly
19 D740414 1 1 1 1 MODULE, Lean Burn Heater Control-Assembly
20 119627 4 4 4 4 4 4 4 4 4 4 MOUNT, Vibration
21 740207B 1 1 1 1 1 1 1 1 1 1 HARNESS, Actuator AFM to Junction Box
22 740244A 1 1 1 1 1 1 1 1 1 1 HARNESS, AFM To Junction
23 211893 1 1 1 1 1 1 1 1 1 1 SNUBBER, Pressure
24 740111C 1 1 1 1 1 1 TRANSDUCER, Pressure
740111B 1 1 1 1
25 C740400 1 1 1 1 MODULE, CEC Air/Fuel-Assembly
D740400 1 1 1 1 1 1
26 740243A 1 1 1 1 HARNESS, Pressure Transducer
27 E295451K 1 1 1 1 1 1 1 1 1 1 BOX, Junction-Assembly
28 740241 1 1 1 1 HARNESS, Proximity Sensor
29 209241F 2 2 2 2 2 2 2 2 2 2 ADAPTER, 1/8"-14 NPT / 3/4"-20 UNEF
30 740207C 1 1 1 1 1 1 HARNESS, Actuator Junction Box to Engine
740207A 1 1 1 1
31 211448B 6 6 6 6 6 6 6 6 6 6 GASKET, Air/Fuel Control
32 211856 1 1 1 1 1 1 1 1 1 1 SPRING, Red Gas Regulator
211856A 1 1 1 1 1 1 1 1 1 1 SPRING, Black Gas Regulator
211856B 1 1 1 1 1 1 1 1 1 1 SPRING, Gray Gas Regulator
33 A740500A 1 1 1 1 1 1 ACTUATOR, Gas Regulator-Assembly
C740500 1 1 1 1
A740015B 1 1 1 1 1 1 MANUAL, With Software-Assembly
C740015A 1 1 1 1 (Not Illustrated)

FORM 6252 Fifth Edition 171


085.10

W 1
3

A 2

U
K
E
4

S 6

H
13
14

A
8
7

9 12

11
15

10

18 16

20
17
19

15
21

22
14

23

24

25

172 FORM 6252 Fifth Edition


085.10
GAS REGULATOR ACTUATOR

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 85
A740500A 1 1 1 1 1 1 ACTUATOR, Gas Regulator-Assembly
C740500 1 1 1 1
1 158417 1 1 1 1 1 1 1 1 1 1 NUT, Nylok, 5/16"-18 UNC
2 211304C 1 1 1 1 SCREW, Spring Adjuster
3 211306A 1 1 1 1 1 1 1 1 1 1 PIN, Dowel
4 740501 1 1 1 1 1 1 1 1 1 1 NUT, Spring Adjuster
5 211376 2 2 2 2 BEARING, Ball
6 211768 1 1 1 1 1 1 1 1 1 1 O-RING, Reciprocating Seal
7 740500A 1 1 1 1 1 1 ADAPTER, Gas Regulator
740500 1 1 1 1
8 21679 2 2 2 2 WASHER, Lock, No. 6
9 21660 2 2 2 2 SCREW, Round Head, No. 6-32 x 1/4"
10 A740303 1 1 1 1 1 1 SWITCH, Proximity
740300A 1 1 1 1
11 740018A 1 1 1 1 1 1 1 1 1 1 TAG, Identification
12 211307A 1 1 1 1 HOUSING, A/F Ratio Controller
13 26477 4 4 4 4 4 4 SCREW, Socket Head, No. 10-24 x 1"
14 26781 4 4 4 8 8 4 4 4 8 8 SCREW, Socket Head, No. 10-24 x 5/8"
15 26420 8 8 8 8 8 8 WASHER, Lock, No. 10
26727 2 2 2 2 2 2
21049 8 8 8 8
16 26411 1 1 1 1 PLUG, Pipe, 3/8" NPT
17 740009 1 1 1 1 COUPLING, 3/8" Dia. Shaft
18 291257 3 3 3 3 WASHER, Tension, 1/4"
19 21543 3 3 3 3 SCREW, Socket Head, 1/4"-20 x 1"
20 209586B 1 1 1 1 1 1 MOTOR, Stepping
209586 1 1 1 1
21 A209603D 1 1 1 1 1 1 RECEPTACLE, Bulkhead
209603C 1 1 1 1
209603D 1 1 1
22 211253A 1 1 1 1 1 1 GASKET
211253 1 1 1 1
23 209580 1 1 1 1 1 1 1 1 1 1 GASKET, Cover
24 209585H 1 1 1 1 1 1 COVER, Motor
209585G 1 1 1 1
209585J 1 1 1 1 1 1 1 1 1 1
25 211753 4 4 4 4 4 4 4 4 4 4 SCREW, Binding Head, No. 6-32 x 1/2"

FORM 6252 Fifth Edition 173


093.00

W
A 2 5

U
K 3

E
4
1

S 28

H
20

27

A
26
3 6
25 7
8

9
13

3
10

24
29 22

23 12

11

14
8
15

16 7
17
21 17
3

20

19

18

174 FORM 6252 Fifth Edition


093.00
WASTEGATE
GROUPS 93, 101
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 93
1 194769D 1 1 1 1 1 1 1 1 CONNECTOR, Male, 4" x 4"
2 291024 4 4 4 4 4 4 4 4 SCREW, Hex Head, M10 x 50 mm
3 291111 16 16 16 16 16 16 16 16 WASHER, Lock, M10
4 305867M 1 1 1 1 1 1 TUBE, Wastegate Sensing
305713S 1 1
5 194769E 1 1 1 1 1 1 1 1 CONNECTOR, Male, 4" x 4"
6 21352 2 2 SCREW, Hex Head, 3/8" x 1-1/4"
7 21354 4 4 4 4 4 4 4 4 SCREW, Hex Head, 3/8" x 1-3/8"
2 2 Used with P/N 21352
8 21052 4 4 4 4 4 4 WASHER, Lock, 3/8"
28346 4 4
9 305445B 1 1 1 1 1 1 1 1 GASKET, Exhaust Bypass
10 305448R 1 1 1 1 1 1 1 1 FLANGE, Exhaust Bypass
305448F 1 1 1 1 1 1
11 305819C 1 1 1 1 1 1 1 RETAINER, Bypass Elbow
305810A 1 1 1 1 WASTEGATE, Turbocharger
12 A305764L 1 1 1 1 1 1 1 1 TUBE, Exhaust Bypass-Assembly
C305764G 1 1 1 1 TUBE, Exhaust Bypass-Assembly,
Side Discharge
13 290980 2 2 2 2 2 2 2 2 SCREW, Socket Head, M10 x 30 mm
305810C 1 1 1 1 WASTEGATE, Turbocharger
14 305813A 1 1 1 1 1 1 1 1 FLANGE, Exhaust Bypass
15 305301A 1 1 1 1 1 1 1 1 GASKET, Exhaust Bypass
16 305445F 1 1 1 1 1 1 1 1 GASKET, Wastegate
17 290679 7 7 7 4 7 7 7 4 SCREW, Hex Head, M10 x 30 mm
291677 5 5 5 2 5 5 5 2 SCREW, Hex Head, M10 x 35 mm
290478 5 5 SCREW, Hex Head, M10 x 40 mm
18 304258D 1 1 1 1 1 1 1 1 GASKET, Exhaust Manifold Outlet
19 305812A 1 1 1 1 1 1 1 1 PLATE, Wastegate Mounting
20 169013G 1 1 1 1 1 1 CLIP, 1/4" Dia. x 1/2"
21 78282A 1 1 PLUG, Square Head, 1/8" NPT
22 305810 1 1 1 1 WASTEGATE, Turbocharger
23 305477 1 1 1 1 1 1 HOSE, 6.35 mm ID x 200 mm
24 305486X 1 1 1 1 TUBE, Wastegate Vent
304169H 1 1
305713U 1 1 TUBE, Wastegate Vent, Impco Carburetor
305867D 1 1 TUBE, Wastegate Vent, Deltec Carburetor
25 295825 3 3 3 3 3 3 NUT, Hex, M10
26 350450 5 5 5 5 5 5 5 5 WASHER, Flat, M10
27 169013 4 4 2 4 4 4 2 4 CLIP, 1/4" Dia. x 3/8"
28 290044 3 3 3 3 3 3 SCREW, Hex Head, M10 x 20 mm
29 199111A 1 1 1 1 1 1 ELBOW, Male, 4" x 2"
Continued

FORM 6252 Fifth Edition 175


093.01

W
A
U 30

K 31

E 34
32

S
35
33
34 30
31

H
32
32

A
36

37 36

176 FORM 6252 Fifth Edition


093.01
WASTEGATE
GROUPS 93, 101
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 101
30 290617 2 2 2 2 2 2 2 2 NUT, Hex, M8
31 21051 2 2 2 2 2 2 2 2 WASHER, Lock, 5/16"
32 293242 4 4 4 4 4 4 4 4 WASHER, Flat, M8
33 177487C 1 1 1 1 1 1 1 1 CLIP, 7/8" Dia.
34 350450 2 2 2 2 2 2 2 2 WASHER, Flat, M10
35 168847E 1 1 1 1 1 1 1 1 BRACE, Tube
36 290541 2 2 2 2 2 2 2 2 SCREW, Hex Head, M8 x 16 mm
37 207313C 1 1 1 1 1 1 1 1 CLIP, 1/4" Dia.

FORM 6252 Fifth Edition 177


095.00

W
A
U
K 1

E
S
H
A
2

178 FORM 6252 Fifth Edition


095.00
CRANKSHAFT PULLEY

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 95
1 301095A 1 1 1 1 1 1 1 1 1 1 PULLEY, Crankshaft, 4 Grooves Equally Spaced
2 301095 1 1 1 1 1 1 1 1 1 1 PULLEY, Crankshaft, 4 Grooves Spaced in Pairs
3 295364 12 12 12 12 12 12 12 12 12 12 SCREW, Socket Head, M12 x 50 mm, Grade 12.9
295432 12 12 12 12 12 12 12 12 12 12 SCREW, Socket Head, M12 x 80 mm, Grade 12.9,
Use With Alternator Pulley

FORM 6252 Fifth Edition 179


100.00

W
A 19

U
K 7

E
1
2

S 2

H 5

A
4
8
3

5
10
9
4
3

6
1
1

12
13

11

18

17

16

13

12

12 14

13

15

13

180 FORM 6252 Fifth Edition


100.00
OIL LEVEL REGULATOR
GROUPS 65, 100
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 100
1 199111L 1 1 1 1 1 1 ELBOW, Male, 1/2" OD x 1/4" NPT
2* *Requires P/N 305530R
2 154981B 1 1 1 1 1 1 1 1 1 1 PIPE, 1/4"
3 78282C 1 1 1 1 1 1 1 1 1 1 PLUG, Pipe, Square Head, 1/4"
4 78208A 1 1 1 1 1 1 1 1 1 1 TEE, Pipe, 1/4"
5 194769M 1 1 1 1 1 2 2 2 2 2 CONNECTOR, Male, 1/2" OD x 1/4" NPT
6 305530H 1 1 1 1 1 TUBE, Leveler Vent
7 305530J 1 1 1 1 1 TUBE, Leveler Vent
8 305530R 1 TUBE, Leveler Vent
9 305530T 1 1 TUBE, Leveler Vent
305530S 1 TUBE, Leveler Vent
10 169013P 2 2 2 2 2 1 1 1 1 1 CLIP, Tube
11 157255A 1 1 1 1 1 1 1 1 1 1 REGULATOR, Oil Level
12 78212D 2 2 2 2 2 2 2 2 2 2 BUSHING, Reducing, 1/2" to 3/8"
13 119111S 2 2 2 2 2 2 2 2 2 2 ELBOW, Male, 1/2" OD x 3/8"
119111D 2 2
14 211355S 1 1 TUBE, Leveler to Oil Pan
15 305530K 1 1 1 1 1 1 1 1 1 1 TUBE, Leveler to Oil Pan
16 293982 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M8 x 30 mm
17 21051 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, M8
18 B277 2 2 2 2 2 2 2 2 2 2 WASHER, Flat
293242 2 2 WASHER, Flat, M8
GROUP 65
19 304700D 1 1 1 1 1 1 1 1 1 1 COVER, Camshaft (with 1/4" NPT Hole)
304700J 1 1 COVER, Camshaft (with 1/4" NPT Hole)

FORM 6252 Fifth Edition 181


100.10

W
A
U
K 10

E
1

S
H 16

13

3 4
2

12
5

7
15 14

1
6

10

11
7
10

182 FORM 6252 Fifth Edition


100.10
OIL LEVEL REGULATOR

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 100
1 307082 1 1 1 1 1 1 1 1 1 1 BRACKET, Oil Leveler
2 350450 2 2 2 2 2 2 2 2 2 2 WASHER, Flat, M10
3 291111 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, M10
4 290393 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 25 mm
5 157255J 1 1 1 1 1 1 1 1 1 1 CONTROLLER, Oil Leveler
6 293242 4 4 4 4 4 4 4 4 4 4 WASHER, Flat, M8
7 21051 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, M8
8 290617 2 2 2 2 2 2 2 2 2 2 NUT, Hex, M8
9 WS808297 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M8 x 30 mm
10 199111M 2 2 2 2 2 2 2 2 2 2 ELBOW, Male, 3/4" OD x 3/4" NPT
11 305304G 1 1 1 1 1 TUBE, Oil Level Drain
305304H 1 1 1 1 1
12 194769G 1 1 1 1 1 2 2 2 2 2 CONNECTOR, Male, 1/2" OD x 3/8" NPT
13 305782L 1 1 1 1 1 1 1 1 1 1 TUBE, Oil Leveler Vent
14 78211L 1 1 1 1 1 1 1 1 1 1 COUPLING, Reducing 3/4" to 1/2"
15 199434Y 1 1 1 1 1 1 1 1 1 1 PIPE, 1/2" x 1-1/4"
16 169013P 1 1 1 1 1 1 1 1 1 1 CLIP, Tube
305971 1 1 1 1 1 1 1 1 1 1 VALVE, Oil Shutoff (Not Depicted)

FORM 6252 Fifth Edition 183


101.00

W
8
7

A 1

U
6

K
9
2

E 3
5

S
3
2
1

H
5
3
4

A
2
10
19 2
3

3
2
18
3
5 2

17

11
20
12

16
15
14

21 13

21

184 FORM 6252 Fifth Edition


101.00
TURBOCHARGER HEAT SHIELDS

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 101
1 290478 4 4 4 4 4 4 4 4 SCREW, Hex Head, M10 x 40 mm
2 291111 6 6 6 6 6 6 6 6 WASHER, Lock, M10
3 350450 6 6 6 6 6 6 6 6 WASHER, Flat, M10
4 48406X 1 1 1 1 1 1 1 1 SPACER, 2-7/8" Long
5 291677 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 35 mm
6 Y18813H 3 3 3 3 3 3 3 3 WASHER, Flat, 3/8"
7 21052 2 2 2 2 2 2 2 2 WASHER, Lock, 3/8"
8 21373 1 1 1 1 1 1 1 1 SCREW, Hex Head, 3/8"-16 x 4"
9 305827D 1 1 1 1 1 1 1 1 HEAT SHIELD, Safety, Use With Flange
Mounted Shielded Coils
10 305827C 1 1 1 1 1 1 1 1 HEAT SHIELD, Safety
11 290541 2 2 2 2 2 2 2 2 SCREW, Hex Head, M8 x 16 mm
12 207313C 2 2 2 2 2 2 2 2 CLIP
13 48406D 1 1 1 1 1 1 1 1 SPACER, 23/64" Long
14 290617 2 2 2 2 2 2 2 2 NUT, Hex, M8
15 21051 2 2 2 2 2 2 2 2 WASHER, Lock, 5/16"
16 293242 4 4 4 4 4 4 4 4 WASHER, Flat, M8
17 304149 1 1 1 1 1 1 1 1 STRAP
18 21350 1 1 1 1 1 1 1 1 SCREW, Hex Head, 3/8"-16 x 1-1/8"
19 21346 1 1 1 1 1 1 1 1 SCREW, Hex Head, 3/8"-16 x 7/8"
20 C305827A 1 1 1 1 1 1 1 1 HEAT SHIELD, Safety-Assembly
21 48406 2 2 2 2 2 2 2 2 SPACER, 3/16"

FORM 6252 Fifth Edition 185


202.00

W 1
6
7

A 3

U
2
4
5

K
4

E 8
10

S 21
9

H
13 5 20
5

A
17
4 19

14 18
11

22
12

15

23

16

24

25

33
26
32

31 27

29

30
28

186 FORM 6252 Fifth Edition


202.00
INSTRUMENT PANEL
GROUPS 202, 220, 243, 244, 245, 246, 247, 249
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 202
1 305146D 1 1 1 1 1 1 1 1 1 1 COVER, Instrument Panel
2 305146E 1 1 1 1 1 1 1 1 1 1 COVER, Instrument Panel and Auxiliary Panel
3 116514D 4 4 4 4 4 4 4 4 4 4 SPACER
4 WS808394 8 8 8 8 8 8 8 8 8 8 SCREW, Hex Head, M8 x 35 mm
5 293242 8 8 8 8 8 8 8 8 8 8 WASHER, Flat, M8
6 305148A 1 1 1 1 1 1 1 1 1 1 BRACKET, Instrument Panel
7 119627 4 4 4 4 4 4 4 4 4 4 MOUNT, Vibration
8 21051 4 4 4 4 4 4 4 4 4 4 WASHER, Flat, 5/16"
9 21181 8 8 8 8 8 8 8 8 8 8 NUT, Hex, 5/16"-16
10 A305434G 1 1 1 1 1 1 1 1 1 1 PANEL, Auxiliary-Assembly
11 A305144C 1 1 1 1 1 1 1 1 1 1 PANEL, Instrument-Assembly
12 26763 12 12 12 12 12 12 12 12 12 12 SCREW, Drive, Round Head,
Plated No. 4 x 3/16"
GROUP 220
13 169013G 2 2 2 2 2 2 2 2 2 2 CLIP, 1/4" x 1/2"
14 C209378B 1 1 1 1 1 1 1 1 1 1 CABLE, Tachometer-Assembly
15 208007A 1 1 1 1 1 1 1 1 1 1 PICKUP, Magnetic
16 209377K 1 1 1 1 1 1 1 1 1 1 TACHOMETER, Digital Electric
GROUP 243
17 60905 1 1 1 1 1 1 1 1 1 1 AMMETER
GROUP 244
18 955998U 1 1 1 1 1 1 1 1 1 1 PLATE, Name, Water Temperature
19 169741M 1 1 1 1 1 1 1 1 1 1 SWITCHGAGE, Water Temperature (Degrees)
GROUP 245
20 305678B 1 1 1 1 1 1 1 1 1 1 ADAPTER, M30 x 1.5 - 0.50 NPTF
21 293028 1 1 1 1 1 1 1 1 1 1 WASHER, Copper
22 169741H 1 1 1 1 1 1 1 1 1 1 SWITCHGAGE, Oil Temperature
23 955204M 1 1 1 1 1 1 1 1 1 1 PLATE, Name, Lube Oil
24 292032 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M8 x 25 mm
WS809173 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M8 x 18 mm, Full Thread
293982 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M8 x 30 mm
25 21051 3 3 3 3 3 3 3 3 3 3 WASHER, Lock, M8
26 293242 3 3 3 3 3 3 3 3 3 3 WASHER, Flat, M8
27 199066H 3 3 3 3 3 3 3 3 3 3 CLIP, 3/16" Dia.
28 290679 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 30 mm
29 291111 1 1 1 1 1 1 1 1 1 1 WASHER, Lock, M10
30 350450 1 1 1 1 1 1 1 1 1 1 WASHER, Flat, M10
31 169013F 1 1 1 1 1 1 1 1 1 1 CLIP, 3/16" x 3/8"
GROUP 246
32 199810K 1 1 1 1 1 1 1 1 1 1 PLATE, Name-Intake Manifold Temperature
33 209808L 1 1 1 1 1 1 1 1 1 1 SWITCHGAGE, Intake Manifold Temperature
Continued

FORM 6252 Fifth Edition 187


202.01

W
A
U
K
E
S
H
A
50
49

44

48
47
42

46 34

45
43
35
41

40

39
37

38

36

188 FORM 6252 Fifth Edition


202.01
INSTRUMENT PANEL
GROUPS 202, 220, 243, 244, 245, 246, 247, 249
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 249
34 164659E 1 1 1 1 1 1 1 1 1 1 GAUGE, Intake Manifold Pressure
35 955204A 1 1 1 1 1 1 1 1 1 1 PLATE, Name, Manifold Pressure
36 305474 1 1 1 1 1 1 1 1 1 1 FITTING, Snubber 3/8"
37 78210A 1 1 1 1 1 1 1 1 1 1 ELBOW, Reducing, 1/4" - 1/8"
38 B8677 1 1 1 1 1 1 1 1 1 1 BUSHING, Reducing, 1/4" - 1/8"
39 A166182N 1 1 1 1 1 1 1 1 1 1 HOSE, Flexible, Manifold Pressure-Assembly
40 B1686 1 1 1 1 1 1 1 1 1 1 ELBOW, Half Union
GROUP 247
41 955204M 1 1 1 1 1 1 1 1 1 1 PLATE, Name, Lube Oil
42 169742L 1 1 1 1 1 1 1 1 1 1 SWITCHGAGE, Oil Pressure, 35 psi shutdown
169742G 1 1 1 1 1 1 1 1 1 1 GAUGE, Oil Pressure
43 194769E 1 1 1 1 1 1 1 1 1 1 CONNECTOR, Male
44 305486U 1 1 1 1 1 1 1 1 1 1 TUBE, Oil Pressure
45 290802 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 28 mm
46 291111 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, M10
47 350450 2 2 2 2 2 2 2 2 2 2 WASHER, Flat, M10
48 169013 2 2 2 2 2 2 2 2 2 2 CLIP, 1/4" Dia.
49 B5871 1 1 1 1 1 1 1 1 1 1 ELBOW, Pipe, 90
50 119111T 1 1 1 1 1 1 1 1 1 1 ELBOW, Male

FORM 6252 Fifth Edition 189


203.00

W
A
U
K 2

E
1

S
H
4
5 6

A 7

10
11

12

13

190 FORM 6252 Fifth Edition


203.00
THROTTLE CONTROL

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 203
1 292032 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M8 x 25 mm
D118799 1 1 1 1 1 1 1 1 1 1 LEVER, Throttle-Assembly
2 21364 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, 3/8"-16 x 2-1/4"
3 B9269B 1 1 1 1 1 1 1 1 1 1 SPRING, Throttle Control
4 B9266F 1 1 1 1 1 1 1 1 1 1 BRACKET, Throttle Lever
5 118799 1 1 1 1 1 1 1 1 1 1 LEVER, Throttle
6 207472 1 1 1 1 1 1 1 1 1 1 PLATE, Instruction
7 21191 1 1 1 1 1 1 1 1 1 1 NUT, Hex, 3/8"-16
8 177381A 2 2 2 2 2 2 2 2 2 2 NUT, Elastic Stop, 5/16"-24
C208439C 1 1 1 1 1 1 1 1 1 1 ROD-Assembly
9 199358C 1 1 1 1 1 1 1 1 1 1 JOINT, Ball, LH
10 26874 1 1 1 1 1 1 1 1 1 1 NUT, Jam, LH, 5/16"-24
11 208439C 1 1 1 1 1 1 1 1 1 1 ROD
12 21187 1 1 1 1 1 1 1 1 1 1 NUT, Hex, 5/16"-24
13 199358B 1 1 1 1 1 1 1 1 1 1 JOINT, Ball, RH

FORM 6252 Fifth Edition 191


203.10

W
A
U 6

K
5
1
4
13

E 7

S 18

H 8

A
10

2
9
17
11

12
16

15

13

14

192 FORM 6252 Fifth Edition


203.10
THROTTLE CONTROL USE WITH PSG, SG GOVERNORS

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 203
A118799E 1 1 1 1 1 1 1 1 1 1 LEVER, Throttle-Assembly
1 118799E 1 1 1 1 1 1 1 1 1 1 LEVER, Throttle
2 21191 1 1 1 1 1 1 1 1 1 1 NUT, Hex, 3/8"-16
3 207472 1 1 1 1 1 1 1 1 1 1 PLATE, Instruction
4 B9266 1 1 1 1 1 1 1 1 1 1 BRACKET, Throttle Lever
5 B9269B 1 1 1 1 1 1 1 1 1 1 SPRING, Throttle Control
6 21364 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, 3/8"-16 x 2-1/4"
7 305440 1 1 1 1 1 1 1 1 1 1 BRACKET, Throttle Lever
8 B8025 2 2 2 2 2 2 2 2 2 2 WASHER, Flat, 21/64" x 13/16" x 1/8"
9 21051 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, M8
10 292453 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M8 x 40 mm
11 21052 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, 3/8"
12 21348 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, 3/8"-16 x 1"
13 177381A 2 2 2 2 2 2 2 2 2 2 NUT, Elastic Stop, 5/16"-24
D157872D 1 1 1 1 1 1 1 1 1 1 ROD-Assembly
14 199358C 1 1 1 1 1 1 1 1 1 1 JOINT, Ball, LH
15 26874 1 1 1 1 1 1 1 1 1 1 NUT, Jam, LH, 5/16"-24
16 157872D 1 1 1 1 1 1 1 1 1 1 ROD
17 21187 1 1 1 1 1 1 1 1 1 1 NUT, Hex, 5/16"-24
18 199358B 1 1 1 1 1 1 1 1 1 1 JOINT, Ball, RH

FORM 6252 Fifth Edition 193


204.00

W
A
U
K
E 1

S
H 4 2

A 3

194 FORM 6252 Fifth Edition


204.00
ELECTRIC STARTER

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 204
1 158283 1 1 1 1 1 1 1 1 1 1 CABLE, Ground
2 21055 3 3 3 3 3 3 3 3 3 3 WASHER, Lock, 5/8"
3 290047 3 3 3 3 3 3 3 3 3 3 SCREW, Hex Head, M16 x 35 mm
4 60883C 1 1 1 1 1 1 1 1 1 1 MOTOR, Starting (24 VDC)
5 290541 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M8 x 16 mm
6 21051 1 1 1 1 1 1 1 1 1 1 WASHER, Lock, 5/16"

FORM 6252 Fifth Edition 195


208.00

W
1
3
2 2 10 11

A
4
3 1

U 5
8

K 6
7
9

E 9
12

S 15 2

H 13

A
14

16

30
19

17
17

20
2 17
2

1
2
1 18

27
29

28 21

23

24
22
25

26

196 FORM 6252 Fifth Edition


208.00
AIR CLEANER G

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 208
1 291677 4 4 SCREW, Hex Head, M10 x 35 mm
2 291111 10 10 WASHER, Lock, M10
3 350450 10 8 WASHER, Flat, M10
4 153789 1 1 INDICATOR, Restrictor
5 153790 1 1 ELEMENT, Restrictor
6 78202A 1 1 ELBOW, Street, 1/8"
7 305122A 1 BRACE, Air Duct
305122B 1 BRACE, Air Duct
8 161699C 1 HOSE, 3"
9 41236 4 CLAMP, Hose, 4-5/8" 5-1/2"
10 A305679 1 TUBE-Assembly
11 161699E 1 HOSE, 2-1/2"
12 295825 2 2 NUT, Hex, M10, Grade 10
13 168013D 1 1 COVER, Plate
14 305846 1 1 GASKET
15 A305126B 1 DUCT, Air-Assembly
A305126G 1 DUCT, Air-Assembly
16 305124F 1 1 BRACKET, Air Cleaner Support
17 Y18813H 4 4 WASHER, Flat, 3/8"
18 290679 4 4 SCREW, Hex Head, M10 x 30 mm
290393 1 1 SCREW, Hex Head, M10 x 25 mm
19 169180L 1 1 ELEMENT, Air Filter
20 A207530D 1 1 FRAME, Air Cleaner-Assembly
21 208349 1 1 ELEMENT, Pre-Cleaner
22 A208272 1 1 SHIELD, Rain-Assembly
23 305138 4 4 STUD, Air Cleaner Mounting Bracket
292032 4 4 SCREW, Hex Head, M8 x 25 mm
21051 4 4 WASHER, Lock, M8
24 159447C 8 8 WASHER, Flat, M8
25 295433 8 8 NUT, Lock, M8
26 120572 1 1 DECAL, Waukesha
27 290046 1 CAPSCREW, Hex Head, M16 x 40 mm
28 21055 1 WASHER, Lock, 5/8"
29 Y18814M 1 WASHER, Flat, 5/8"
30 305802B 1 BRACE, Air Cleaner

FORM 6252 Fifth Edition 197


208.10

W
1

2 5 6

A 3
2

U 3

K 4

E
7

S
8

H 10

A
3
2

5
11
23

22
3 21

12
2

20 3
1 2
19

14

13

15

16

17
18

198 FORM 6252 Fifth Edition


208.10
AIR CLEANER GL

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 208
1 291677 3 3 SCREW, Hex Head, M10 x 55 mm
2 291111 10 10 WASHER, Lock, M10
3 350450 8 8 WASHER, Flat, M10
4 305122C 1 1 BRACE, Air Duct
5 290393 4 4 SCREW, Hex Head, M10 x 25 mm
290802 1 1 SCREW, Hex Head, M10 x 28 mm
6 350374 1 1 ELBOW, 5" ID
7 41236E 2 2 CLAMP, Hose, 4-5/8" 5-1/2"
8 153790 1 1 ELEMENT, Restrictor
9 153789 1 1 INDICATOR, Restrictor
10 295825 2 2 NUT, Hex, M10, Grade 10
11 169180L 1 1 ELEMENT, Air Filter
12 A207530D 1 1 FRAME, Air Cleaner-Assembly
13 208349 1 1 ELEMENT, Pre-Cleaner
14 A208272 1 1 SHIELD, Rain-Assembly
15 305138 4 4 STUD, Air Cleaner Mounting Bracket
16 293242 8 8 WASHER, Flat, M8
17 295433 8 8 NUT, Lock, M8
18 120572 1 1 DECAL, Waukesha
19 290679 8 8 SCREW, Hex Head, M10 x 30 mm
20 305124G 1 1 BRACKET, Air Cleaner Support
21 168013D 1 1 PLATE, Cover
22 305846 1 1 GASKET, Cover Plate
23 A305126M 1 1 DUCT, Air-Assembly

FORM 6252 Fifth Edition 199


208.20 5

W 4

A
1 6

U
8
5
4

K
4
2

E
9

S
7
10
3

H 12

A
11

4
23

7
22
5

3
21 20
19 14
18

17

13

15

16

200 FORM 6252 Fifth Edition


208.20
AIR CLEANER GLD

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 208
1 153789 1 1 INDICATOR, Restrictor
2 153790 1 1 ELEMENT, Restrictor
3 290393 10 10 SCREW, Hex Head, M10 x 25 mm
4 291111 12 12 WASHER, Lock, M10
5 350450 10 10 WASHER, Flat, M10
6 305807A 1 1 BRACKET, Upper Air Cleaner
7 290039 6 6 NUT, Hex, M10
8 295825 2 2 NUT, Hex, M10, Grade 10
9 168013D 1 1 PLATE, Cover
10 168042 1 1 GASKET, Cover Plate
11 78282E 1 1 PLUG, Pipe, Square Head, 1/2"
12 305808A 1 1 BRACKET, Lower Air Cleaner
13 169180K 1 1 ELEMENT, Air Filter
14 208349A 1 1 ELEMENT, Pre-Cleaner
15 C305803A 1 1 SHIELD, Rain-Assembly
16 120572 1 1 DECAL, Waukesha
17 B9059 2 2 NUT, Stop, 3/8"-16 x 13/32"
18 76911 2 2 WASHER, 13/32" x 7/8" x 1/8"
19 305814 2 2 STUD, Offset
20 294506 4 4 SCREW, Hex Head, M10 x 55 mm
21 305809 2 2 SPRING, Extension
22 293248 4 4 NUT, Lock, Hex, M10
23 A305576A 1 1 DUCT, Air-Assembly

FORM 6252 Fifth Edition 201


208.30

W
1

A
2
4

U
3

K
5

E
23

S
22

H
7

A
9 7
8
7
21 20
5

8
19
7
8
10
16 9
17
18

11
5
8 7
8

15

14

13

12

202 FORM 6252 Fifth Edition


208.30
AIR CLEANER GSID

ITEM PART F18 H24


NO. NUMBER DESCRIPTION
G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 208
1 153789 1 1 1 1 INDICATOR, Restriction
2 153790 1 1 1 1 ELEMENT, Restriction
3 A305126T 1 1 1 1 DUCT, Air-Assembly
4 78282E 1 1 1 1 PLUG, Pipe, Square, 1/2"
5 290393 10 10 10 10 SCREW, Hex Head, M10 x 25 mm
6 305807A 1 1 1 1 BRACKET, Upper Air Cleaner
7 350450 10 10 10 10 WASHER, Flat, M10
8 291111 12 12 12 12 WASHER, Lock, M10
9 290039 4 4 4 4 NUT, Hex, M10
10 305808A 1 1 1 1 BRACKET, Lower Air Cleaner
11 293248 4 4 4 4 NUT, Elastic Lock, M10
12 169180L 1 1 1 1 ELEMENT, Air Cleaner
13 208349 1 1 1 1 ELEMENT, Precleaner
14 C305803C 1 1 1 1 SHIELD, Rain-Assembly
15 120572 1 1 1 1 DECAL, Waukesha
16 B9059 2 2 2 2 NUT, Stop, 3/8"-16
17 76911 2 2 2 2 WASHER, Flat, 13/32"
18 305814 2 2 2 2 STUD, Offset
19 294506 4 4 4 4 SCREW, Hex Head, M10 x 55 mm
20 305809 2 2 2 2 SPRING, Extension
21 295825 2 2 2 2 NUT, Hex, M10, Grade 10
22 168013D 1 1 1 1 PLATE, Cover, For Open Breather
23 305846 1 1 1 1 GASKET, For Open Breather

FORM 6252 Fifth Edition 203


208.40

W
1

A
2
5

U
4

K
E 6

S
H
A 7
8

18

17

15
9

16

14
13

12

10

11

204 FORM 6252 Fifth Edition


208.40
AIR CLEANER GLD DELTEC

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 208
1 WS808423 2 SCREW, Hex Head, M10 x 100 mm
2 78282E 1 PLUG, Pipe, Square Head, 1/2"
3 153789 1 INDICATOR, Restriction
4 153790 1 ELEMENT, Restrictor
5 306006A 1 HOSE, Dual Fuel
6 41236E 2 CLAMP, Hose
7 A305576 1 DUCT, Air-Assembly, Dual Fuel
8 169180K 1 ELEMENT, Air Filter, Dual Fuel
9 208349A 1 ELEMENT, Pre-Cleaner
10 C305803A 1 SHIELD, Rain, Dual Fuel
11 120572 1 DECAL, Waukesha
12 293248 2 NUT, Stop, M10
13 76911 2 WASHER, Flat, 13/32" x 7/8" x 1/8"
14 306032 2 WASHER, Fixing
15 305809 2 SPRING, Extension
16 306033 1 SHAFT, Air Duct
17 290393 2 SCREW, Hex Head, M10 x 25 mm
18 305876 4 WASHER, Special

FORM 6252 Fifth Edition 205


208.50

W
2

A 3 4
6

U
K 5

E
S
7

H
A
8

9
20

19

18 17
16
10
15

14
11

13

12

206 FORM 6252 Fifth Edition


208.50
AIR CLEANER GLD/2 DELTEC

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 208
1 294955 2 2 WASHER, Flat, M20
2 WS808423 2 2 SCREW, Hex Head, M10 x 100 mm
3 306021 1 1 BUSHING, Reducing, 1/2" to 3/8"
4 153789 1 1 INDICATOR, Restriction
5 153790 1 1 ELEMENT, Restrictor
6 306006 1 1 HOSE
7 41236M 2 2 CLAMP, Hose
8 A305872T 1 DUCT, Air-Assembly
A305872S 1 DUCT, Air-Assembly
9 169180K 1 1 ELEMENT, Air Filter
10 208349A 1 1 ELEMENT, Pre-Cleaner
11 C305803E 1 1 SHIELD, Rain
12 120572 1 1 DECAL, Waukesha
13 293248 2 2 NUT, Stop, M10
14 76911 2 2 WASHER, Flat, 13/32" x 7/8" x 1/8"
15 306032 2 2 WASHER, Fixing
16 305809 2 2 SPRING, Extension
17 306033 1 1 SHAFT, Air Duct
18 290679 2 2 SCREW, Hex Head, M10 x 30 mm
19 305876 2 2 WASHER, Special
20 48406M 2 2 SPACER

FORM 6252 Fifth Edition 207


213.00

W
A 13

U
K
26

E
S
14

H 25

A
12
17
18
11
10
15 9
16

19

8
21

22
20

2
7

23

24
6

4
5

208 FORM 6252 Fifth Edition


213.00
SHUTDOWN SYSTEM
GROUPS 213, 260, 285
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 213
1 A305627 1 1 1 1 1 1 1 1 1 1 HARNESS, Safety-Assembly
2 169013 2 2 2 2 2 2 2 2 2 2 CLIP, Harness
3 951049B 1 1 1 1 1 1 1 1 1 1 GRIP, Cord
4 69695 1 1 1 1 1 1 1 1 1 1 ADAPTER, Panel Board
5 290617 2 2 2 2 2 2 2 2 2 2 NUT, Hex, M8
6 292032 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M8 x 25 mm
7 305626 1 1 1 1 1 1 1 1 1 1 BRACKET, Panel Board
GROUP 260
8 152934 1 1 1 1 1 1 1 1 1 1 SWITCH, Magnetic (Use With CEC Ignition)
9 161944C 1 1 1 1 1 1 1 1 1 1 TERMINAL, Disconnect
10 291102 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M8 x 20 mm
11 21051 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, 5/16"
12 293242 2 2 2 2 2 2 2 2 2 2 WASHER, Flat, M8
13 304895C 1 1 1 1 1 1 1 1 1 1 BRACKET, Switch Mounting
(Use without Instrument Panel)
14 A69828 1 1 1 1 1 1 1 1 1 1 SWITCH, Start/Stop
15 111625B 1 1 1 1 1 1 1 1 1 1 PLATE, Name-Emergency Stop
16 21766 2 2 2 2 2 2 2 2 2 2 SCREW, Drive, Round Head-Plated,
No. 4 x 3/16"
17 957389L 1 1 1 1 1 1 1 1 1 1 PLATE, Name-Pull Run/Push Stop
GROUP 285
18 60869A 1 1 1 1 1 1 1 1 1 1 SWITCH, Pushbutton,
(Use With Electric Starter)
19 305374 1 1 1 1 1 1 1 1 1 1 BRACKET, Switch Mounting
20 21627 2 2 2 2 2 2 2 2 2 2 WASHER, External Shakeproof, No. 12
21 305373 1 1 1 1 1 1 1 1 1 1 GUARD, Start Button
22 955204P 1 1 1 1 1 1 1 1 1 1 PLATE, Name-Start
23 21112 2 2 2 2 2 2 2 2 2 2 SCREW, Roundhead, No. 12
24 26736 2 2 2 2 2 2 2 2 2 2 CAPSCREW, Parker Head, No. 4
25 Y18813M 2 2 2 2 2 2 2 2 2 2 WASHER, Flat, 5/8"
26 26519 2 2 2 2 2 2 2 2 2 2 WASHER, Shakeproof, 5/8"

FORM 6252 Fifth Edition 209


214.00

W
A
2

U
K
E 3

S 9

H 15 10

A
8
14

11

4
13
12

210 FORM 6252 Fifth Edition


214.00
CARBURETOR F18G/GL & H24GL

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GL GLD G GSID GL GLD
GROUP 214
1 28735 4 4 4 SCREW, Cap, Ferry Head
2 305088D 1 1 1 GASKET, Butterfly Housing
3 A58003C 1 CARBURETOR, IMPCO 200D-Assembly
58003C 1 CARBURETOR
C58003D 1 1 CARBURETOR, IMPCO 200D (Hi-Boost)-
Assembly
58003D 1 1 CARBURETOR
4 493669 2 2 2 VALVE, Air/Gas-Assembly
5 493668 2 DIAPHRAGM, Silicone
493670 2 2 DIAPHRAGM, Silicone
6 493690 2 2 2 SPRING, Air Valve
7 493691 2 2 GASKET, Diaphragm
8 39110 4 4 4 STUD
9 305856 1 1 1 GASKET, Carburetor
10 305090 1 ELBOW, Carburetor Air Inlet
305368A 1 1 ELBOW, Carburetor Air Inlet
11 78282D 2 2 2 PLUG, Pipe, Square Head, Steel
12 21050 4 4 WASHER, Lock, 1/4"
13 21173 4 4 4 NUT, Hex, 1/4"-20
14 161699 1 HOSE
15 41236B 2 CLAMP, Hose

FORM 6252 Fifth Edition 211


214.10

W
1
6
2

A
U
7

K
3
5

E
S 14

H 4

A 15 9
8

10
16
11

12
17

18

19

13
13

212 FORM 6252 Fifth Edition


214.10
CARBURETOR GL
GROUPS 35, 214
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 35
1 295586 1 1 1 1 O-RING
2 305368B 1 1 1 1 CONNECTION, Offset, Carburetor Inlet
3 78282D 1 1 1 1 PLUG, Pipe, Square Head, 3/8"
4 78927M 1 1 1 1 HOSE, 4" ID x 2-1/2" Long
5 41236B 2 2 2 2 CLAMP, Hose
GROUP 214
6 28644 4 4 4 4 CAPSCREW, Ferryhead, 5/16"-18 x 7/8"
7 305088E 1 1 1 1 GASKET, Butterfly Valve Housing
8 59028 1 1 1 1 CARBURETOR, IMPCO 400VF, Natural Gas
9 489438 1 1 1 1 O-RING
10 489442 2 2 2 2 SCREW
11 489445 1 1 1 1 VALVE, Gas
12 489437 1 1 1 1 O-RING
13 489440 12 12 12 12 SCREW
14 489439 1 1 1 1 O-RING
15 489446 1 1 1 1 SPACER, Updraft
16 489444 1 1 1 1 DIAPHRAGM
17 489431 4 4 4 4 SCREW
18 489443 1 1 1 1 SPRING, Green
19 489435 1 1 1 1 O-RING, Cover

FORM 6252 Fifth Edition 213


214.20

W
2

A 3

U
23
4

K
6

E 7

S
H
5
8
18

A 9

19 20
10
24

26 11

21 12

13

22
14

25

15

27

29
16

30 28

17

31

32

214 FORM 6252 Fifth Edition


214.20
CARBURETOR G

ITEM PART F18 H24


NO. NUMBER DESCRIPTION
G GSID GL GLD G GSID GL GLD
GROUP 214
1 21205 4 4 NUT, Hex, 1/2"-13
2 169568C 1 1 GASKET, Carburetor Air Horn
3 Y18814K 4 4 WASHER, 1/2"
4 21433 4 4 CAPSCREW, Hex Head, 1/2"-13 x 1-3/4"
5 Y18814H 8 8 WASHER, 3/8"
59021B 1 CARBURETOR, Impco 600VFI Natural Gas
59021F 1 1 CARBURETOR, Dual Fuel, Impco 600VFI
Digester/Natural Gas
59021G 1 1 CARBURETOR, Impco 600VFI Landfill Gas
6 493722 4 4 CAPSCREW, 3/8"-16
7 493719 1 1 AIR HORN
8 493637 1 1 GASKET
9 493720 6 6 CAPSCREW, No. 10-24 x 5/8"
10 493721 1 1 COVER, Air Valve Diaphragm
11 489021 1 1 SPRING, Downshift Air Valve, Yellow
12 493723 4 4 CAPSCREW, No. 8-32 x 5/16"
13 493724 1 1 PLATE, Backup
14 499222 1 1 DIAPHRAGM
15 489035 1 1 SHAFT
16 489020 1 1 VALVE, Air
17 489031 1 1 O-RING
18 489032 1 1 O-RING
19 493720 6 6 CAPSCREW, No. 10-24 x 5/8"
A211291B 1 1 VALVE, Gas Kit, Varifuel-Assembly
A211291G 1 1 VALVE, Gas Kit, Landfill Gas-Assembly
20 211291B 1 1 VALVE, Gas, Varifuel Gas
211291G 1 1 VALVE, Gas, Landfill Gas
21 489077 1 1 JET, Gas
22 489046 1 1 O-RING
23 489030 1 1 BODY
24 159249B 1 1 ELBOW, 1-1/2"
25 78282A 1 1 PLUG, Pipe, Square Head-Steel, 1/8"
26 161694C 1 1 PIPE, 1-1/2" x 2"
27 305537C 1 1 GASKET, Top Flange
28 305466A 1 1 ELBOW, Air Inlet
29 28793 4 4 CAPSCREW, Hex Head, 5/16"-18 x 1"
30 305088D 1 1 GASKET, Butterfly Valve Housing
31 21051 4 4 WASHER, Lock, M8
32 21350 4 4 CAPSCREW, Hex Head, 3/8"-16 x 1-1/8"

FORM 6252 Fifth Edition 215


214.30

W
A
U
1

K
E
2

S
H 13

A 3

14
5

4
15

6
7 16

8
9 18
17

10

19

11

20
12

21

22

216 FORM 6252 Fifth Edition


214.30
CARBURETOR GLD

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GL GLD G GSID GL GLD
GROUP 214
1 305411 1 1 ADAPTER, Carburetor Out
2 169905 1 1 GASKET, Carb To Air Connection
3 21346 6 6 SCREW, Hex Head, 3/8"-16 x 7/8"
4 21052 6 6 WASHER, Lock, 3/8"
5 290179 6 6 SCREW, Hex Head, M12 x 30 mm
59022 1 1 CARBURETOR, 600DVF1
6 493637 2 2 GASKET
A211291C 2 2 VALVE, Gas Kit, Natural Gas-Assembly
7 489046 2 2 O-RING
8 489045 2 2 JET, Gas
9 493720 2 2 CAPSCREW, No. 10-24 x 5/8"
10 211291C 2 2 VALVE, Gas, Natural Gas
11 489032 2 2 O-RING
12 489030 2 2 BODY
13 489031 2 2 O-RING
14 489020 2 2 VALVE, Air
15 489035 2 2 SHAFT
16 499222 2 2 DIAPHRAGM, Silicone (Tan)
17 493724 2 2 PLATE, Backup
18 493723 8 8 CAPSCREW, No. 8-32 x 5/16"
19 493643 2 2 SPRING, Air Valve (Silver)
20 493721 2 2 COVER, Air Valve Diaphragm
21 493720 12 12 CAPSCREW, No. 10-24 x 5/8"
22 493646 1 1 GASKET, Carb To Air Cleaner

FORM 6252 Fifth Edition 217


214.40

W 2 2
5
7

A
1 8
6
4 9

U
3
16

K
15
10

E
S
14
17

H 12
11

A 13

26
18

27
19

20
28
21
22

29
23

30

24
31

32
25

33

34

218 FORM 6252 Fifth Edition


214.40
CARBURETOR GSID
GROUPS 214, 263
ITEM PART F18 H24
NO. NUMBER DESCRIPTION
G GSID GL GLD G GSID GL GLD
GROUP 263
1 294019 2 2 SCREW, Hex Head, M12 x 65 mm
2 290193 4 4 WASHER, Flat, M12
3 118879R 1 1 FLANGE
4 155997X 1 1 PIPE, 1-1/2" x 3", Threaded One End
5 291107 2 2 WASHER, Lock, M12
6 290026 2 2 NUT, Hex, M12
7 350441 4 4 SCREW, Hex Head, M8 x 60 mm
8 211051 4 4 WASHER, Lock, M8
9 293242 4 4 WASHER, Flat, M8
10 116514D 4 4 SPACER
11 305543 1 1 BRACKET, Fuel Inlet Support
12 161592 1 1 ELBOW
499714 2 2 GASKET, Elbow
13 164972H 1 1 PIPE, 1-1/2" x 5-1/2", Threaded One End
14 305537C 1 1 GASKET, Top Flange
15 305499 1 1 ADAPTOR, Carb Outlet
16 21360 4 4 SCREW, Hex Head, 3/8"-16 x 1-3/4"
21354 4 4 SCREW, Hex Head, 3/8"-16 x 1-3/8"
17 21052 4 4 WASHER, Lock, 3/8"
GROUP 214
59025C 1 1 CARBURETOR, IMPCO 600 VFI
18 493637 1 1 GASKET
19 489046 1 1 O-RING
20 489045 1 1 JET, Gas
21 493720 1 1 CAPSCREW, No. 10-24 x 5/8"
22 211291N 1 1 VALVE, Gas, Natural Gas
23 489294 1 1 SPACER
24 489032 1 1 O-RING
25 489030 1 1 BODY
26 489031 1 1 O-RING
27 489020 1 1 VALVE, Air
28 489035 1 1 SHAFT
29 499222 1 1 DIAPHRAGM
30 493724 1 1 PLATE, Backup
31 493723 4 4 CAPSCREW, No. 8-32 x 5/16"
32 493643 1 1 SPRING, Air Valve, Silver
33 493721 1 1 COVER, Air Valve Diaphragm
34 493720 6 6 CAPSCREW, No. 10-24 x 5/8"

FORM 6252 Fifth Edition 219


214.50

W
A
U
K
1

E 2
22

S
H
21
1
3

A 2
20

16
14
1
3
8 19
7
4
2
17

10
18

5
16
4 9

15

14

13

13 14

6 11
12

220 FORM 6252 Fifth Edition


214.50
CARBURETOR F18GLD DUAL FUEL
GROUPS 29, 214
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GL GLD G GSID GL GLD
GROUP 214
1 305869A 1 VALVE, Gas Control, 2" BSPT
2 305869 1 VALVE, Gas Control, 1-1/2" BSPT
3 305445H 4 GASKET, Fuel Inlet, 1-1/2"
4 59032D 1 CARBURETOR, Deltec Dual Fuel 140 Dia.
5 305445J 2 GASKET, Carburetor
6 305445P 2 GASKET, Gas Inlet
7 21051 4 WASHER, Lock, M8
8 290617 4 NUT, Hex, M8
GROUP 29
9 305410D 1 CONNECTION, Carburetor
10 290478 2 SCREW, Hex Head, M10 x 40 mm
11 294936 2 SCREW, Hex Head, M10 x 45 mm
12 306020A 1 BRACKET, Pipe Support
13 350450 4 WASHER, Flat, M10
14 291111 6 WASHER, Lock, M10
15 350428 2 SCREW, Hex Head, M10 x 22 mm
16 290039 6 NUT, Hex, M10
17 306001B 1 GASKET, Air Connection
18 211900B 1 LABEL, Danger, Gas Shutoff
19 305410C 1 TUBE, Carburetor to Turbocharger
20 211203E 1 O-RING, Nitrile
21 305419 2 RETAINER, Turbo Inlet
22 153402F 1 CLAMP, Hose

FORM 6252 Fifth Edition 221


214.60

W
A
1

U
K 2

E
S
H
1

A 2 11

1
10
18
3 9
19

5
7
8
12
6

13
16

19
19

15

17 14

222 FORM 6252 Fifth Edition


214.60
CARBURETOR GLD DELTEC/2

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GL GLD G GSID GL GLD
GROUP 214
1 306005 1 1 VALVE, Gas Control, 2" BSPT
2 305445H 2 2 GASKET, Fuel Inlet, 2"
3 290617 4 4 NUT, Hex, M8
4 21051 4 4 WASHER, Lock, M8
5 293242 4 4 WASHER, Flat, M8
6 306003E 1 1 PLATE, Mounting
7 306002A 1 1 GASKET, Carburetor
8 306001 1 1 GASKET, Air Connection
9 305410C 1 1 TUBE, Carburetor to Turbocharger
10 153419 1 1 RETAINER, Turbo Inlet
11 153402F 1 1 CLAMP, Hose
12 211900B 1 1 LABEL, Danger, Gas Shutoff
13 290478 1 1 SCREW, Hex Head, M10 x 40 mm
14 A306020C 1 1 BRACKET, Pipe Support
15 290575 2 2 WASHER, Straight
16 290679 2 2 SCREW, Hex Head, M10 x 30 mm
17 306000L 1 1 CARBURETOR, Deltec, 200 mm Dia.
18 291677 3 3 SCREW, Hex Head, M10 x 35 mm
19 76911 6 6 WASHER, 13/32" x 7/8" x 1/8"

FORM 6252 Fifth Edition 223


219.00

W 1
2

A
U 3

K 8 2
1
5

E
4

S
H
A
1
2

2
9
10
9

12 5
4 6
7

11
14

15

13

224 FORM 6252 Fifth Edition


219.00
ENGINE SUPPORT

ITEM PART F18 H24


NO. NUMBER DESCRIPTION
G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 219
1 290047 12 12 12 12 12 12 12 12 12 12 SCREW, Hex Head, M16 x 35 mm
2 21055 17 17 17 17 17 17 17 17 17 17 WASHER, Lock, 5/8"
3 305631A 1 1 1 1 1 1 1 1 1 1 BRACE, Rear Support
4 290193 6 6 6 6 6 6 6 6 6 6 WASHER, Flat, M12
5 290180 6 6 6 6 6 6 6 6 6 6 SCREW, Hex Head, M12 x 40 mm
6 291107 6 6 6 6 6 6 6 6 6 6 WASHER, Lock, M12
7 290026 6 6 6 6 6 6 6 6 6 6 NUT, Hex, M12
8 304719C 2 2 2 2 2 2 2 2 2 2 SUPPORT, Engine, Rear
9 304067 4 4 4 4 4 4 4 4 4 4 PIN, Split
10 295479 5 5 5 5 5 5 5 5 5 5 SCREW, Hex Head, M16 x 70 mm
11 304794B 1 1 1 1 1 1 1 1 1 1 SUPPORT, Engine, Right Front
12 305539 1 1 1 1 1 1 1 1 1 1 BRACE, Front Support
13 304795B 1 1 1 1 1 1 1 1 1 1 SUPPORT, Engine, Left Front
14 305573 4 4 4 4 4 4 4 4 4 4 BOLT, Leveling, M16 x 60 mm
15 290223 4 4 4 4 4 4 4 4 4 4 NUT, Hex, M16

FORM 6252 Fifth Edition 225


223.00

W
A
U
K
E
S
H
A

3 2

226 FORM 6252 Fifth Edition


223.00
VIBRATION DAMPER GUARD F18

ITEM PART F18 H24


NO. NUMBER DESCRIPTION
G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 223
1 305664B 1 1 1 1 1 GUARD, Vibration Damper
2 63809U 2 2 2 2 2 SPACER, 13/32" x 3/4" x 1-1/4"
3 350407 2 2 2 2 2 SCREW, Hex Head, M10 x 130 mm
4 WS808423 1 1 1 1 1 SCREW, Hex Head, M10 x 100 mm

FORM 6252 Fifth Edition 227


223.10

W
A
1

U
3 2

K
4

E
6
9

S
8
24 7

H 11

A 2
3
12 3 2 10

13

23

3
3
2

23
18

14 9
9
8

15

16
2
3

19

20

21 17
22

228 FORM 6252 Fifth Edition


223.10
VIBRATION DAMPER GUARD F18, H24

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 223
1 293982 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M8 x 30 mm
2 21051 15 15 15 15 15 15 15 15 15 15 WASHER, Lock, M8
3 293242 8 8 8 8 8 8 8 8 8 8 WASHER, Flat, M8
4 305688C 1 1 1 1 1 1 1 1 1 1 BRACKET
5 116514H 1 1 1 1 1 1 1 1 1 1 SPACER, 11/32" x 5/8" x 1-3/16"
116514U* 1 1 1 1 1 1 1 1 1 1 SPACER, 11/32" x 5/8" x 7/8"
*to be used with P/N A305664E
6 D305689 1 1 COVER, Top Vibration Damper Guard-
Assembly
C305689 1 1 1 1 1 1 1 1 COVER, Top Vibration Damper Guard-
Assembly
7 294506 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 55 mm
8 291111 5 5 5 5 5 5 5 5 5 5 WASHER, Lock, M10
9 350450 5 5 5 5 5 5 5 5 5 5 WASHER, Flat, M10
10 WS808292 12 12 12 12 12 12 12 12 12 12 SCREW, Hex Head, M8 x 14 mm
11 A305664E 1 1 1 1 1 1 1 1 1 1 GUARD-Assembly (Use Without Alternator)
A305664G 1 1 1 1 1 1 1 1 1 1 GUARD-Assembly (Use With Alternator)
12 117686 1 1 1 1 1 1 1 1 1 1 SPACER, 13/32" x 11/16" x 5/32"
78002 1 1 1 1 1 1 1 1 1 1 SPACER, 13/32" x 3/4" x 1/2"
63809Y 1 1 1 1 1 1 1 1 1 1 SPACER, 13/32" x 3/4" x 9/16"
78002A 1 1 1 1 1 1 1 1 1 1 SPACER, 7/16" x 3/4" x 1/2"
13 WS808397 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M8 x 60 mm
350441 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M8 x 60 mm
WS808398 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M8 x 55 mm
14 291024 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 50 mm
15 290478 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 40 mm
291677 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 35 mm
16 290498 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, M8 x 12 mm
17 305695B 1 1 1 1 1 1 1 1 1 1 COVER, Crankshaft Pulley Guard Side
18 A305694 1 1 1 1 1 1 1 1 1 1 GUARD, Crankshaft Pulley-Assembly
19 305695A 1 1 1 1 1 1 1 1 1 1 COVER, Crankshaft Pulley Guard
20 294952 6 6 6 6 6 6 6 6 6 6 WASHER, Flat, M6
21 293340 6 6 6 6 6 6 6 6 6 6 WASHER, Lock, M6
22 291596 6 6 6 6 6 6 6 6 6 6 SCREW, Hex Head, M6 x 10 mm
23 290541 8 8 8 8 8 8 8 8 8 8 SCREW, Hex Head, M8 x 16 mm
24 305297 1 1 1 1 1 1 1 1 1 1 COVER, Vibration Damper Guard
(Use With No Pulley)

FORM 6252 Fifth Edition 229


223.20

W
A 1

U 2

K
3

E 5

S
6
8

H
7
17

A
10

11

2 9
3

2
19
12

15 8
3 9

13

3 2

14

7
2 18

16

230 FORM 6252 Fifth Edition


223.20
VIBRATION DAMPER GUARD
HIGH CAPACITY OIL PAN

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 223
1 WS808397 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M8 x 50 mm
2 21051 17 17 17 17 17 17 17 17 17 17 WASHER, Lock, M8
3 293242 9 9 9 9 9 9 9 9 9 9 WASHER, Flat, M8
4 305688C 1 1 1 1 1 1 1 1 1 1 BRACKET
5 116514H 1 1 1 1 1 1 1 1 1 1 SPACER, 11/32" x 5/8" x 1-3/16"
6 C305689 1 1 1 1 1 1 1 1 COVER, Top Vibration Damper
Guard-Assembly
7 291111 4 4 4 4 4 4 4 4 4 4 WASHER, Lock, M10
8 350450 4 4 4 4 4 4 4 4 4 4 WASHER, Flat, M10
9 290541 3 3 3 3 3 3 3 3 3 3 SCREW, Hex Head, M8 x 16 mm
10 A305664J 1 1 1 1 1 1 1 1 1 1 GUARD-Assembly
11 116514N 1 1 1 1 1 1 1 1 1 1 SPACER, 5/8" x 11/32" x 11/16"
12 350440 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M8 x 45 mm
13 290478 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 40 mm
14 305695G 1 1 1 1 1 1 1 1 1 1 COVER, Alternator Bracket Side
15 305687 1 1 1 1 1 1 1 1 1 1 COVER, Vibration Damper Guard
16 290498 8 8 8 8 8 8 8 8 8 8 SCREW, Hex Head, M8 x 12 mm
17 WS808423 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 100 mm
18 290039 2 2 2 2 2 2 2 2 2 2 NUT, Hex, M10
19 78002A 1 1 1 1 1 1 1 1 1 1 SPACER, 7/16" x 3/4" x 1/2"

FORM 6252 Fifth Edition 231


225.00 1

W
7
6

A
8 2

U
11

K
10

13

E
3 5

12

S
H
14

15 3
4

A 16

17
7
20 20
18
21

19
20 9
22

27 10

25
23 26
24
28
29

7
32
9
34

20
20
30
33 31

232 FORM 6252 Fifth Edition


225.00
AIR/GAS STARTER

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 225
1 304146 1 1 1 1 1 1 1 1 1 1 RESERVOIR, Oil
2 304765 1 1 1 1 1 1 1 1 1 1 BRACKET, Oil Reservoir
3 Y18813M 3 3 3 3 3 3 3 3 3 3 WASHER, Flat, M16
4 291327 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M16 x 50 mm
5 209000A 1 1 1 1 1 1 1 1 1 1 DECAL, Instruction
6 199111A 1 1 1 1 1 1 1 1 1 1 ELBOW, Male
7 44893A 4 4 4 4 4 4 4 4 4 4 SPACER
8 169013 1 1 1 1 1 1 1 1 1 1 CLIP, Tube
9 350450 6 6 6 6 6 6 6 6 6 6 WASHER, Flat, M10
10 294936 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 45 mm
11 305713H 1 1 1 1 1 1 1 1 1 1 TUBE, Oil Supply
12 290380 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M16 x 45 mm
13 194769D 1 1 1 1 1 1 1 1 1 1 CONNECTOR, Male
14 194840J 1 1 1 1 1 1 1 1 1 1 LUBRICATOR, Air Starter
15 211910W 1 1 1 1 1 1 1 1 1 1 LABEL, Warning-Gas Venting
16 304894 1 1 1 1 1 1 1 1 1 1 STARTER, Air/Gas
17 211260A 1 1 1 1 1 1 1 1 1 1 PIPE, 1-1/4" x 2", Threaded Both Ends
18 209824G 2 2 2 2 2 2 2 2 2 2 ELBOW, Pipe, 1-1/4" x 90
19 208570B 1 1 1 1 1 1 1 1 1 1 VALVE, Relay
20 199111U 5 5 5 5 5 5 5 5 5 5 ELBOW, Male
21 294523 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M6 x 20 mm
22 211401N 1 1 1 1 1 1 1 1 1 1 TUBE, Pressure Delivery
23 209821 1 1 1 1 1 1 1 1 1 1 PLATE, Name-Start
24 194769F 1 1 1 1 1 1 1 1 1 1 CONNECTOR, Male
25 169013H 2 2 2 2 2 2 2 2 2 2 CLIP, Tube
26 304701 1 1 1 1 1 1 1 1 1 1 SUPPORT, Clip
27 294952 2 2 2 2 2 2 2 2 2 2 WASHER, Flat, M6
28 290452 1 1 1 1 1 1 1 1 1 1 NUT, Hex, M6
29 305375F 1 1 1 1 1 1 1 1 1 1 TUBE, Pressure Delivery
30 305375E 1 1 1 1 1 1 1 1 1 1 TUBE, Pressure Supply
31 78282F 1 1 1 1 1 1 1 1 1 1 PLUG, Pipe, Hex Head, 3/4"
32 209942C 1 1 1 1 1 1 1 1 1 1 STRAINER, Y
33 211260 1 1 1 1 1 1 1 1 1 1 PIPE, 1-1/4" x 5", Threaded Both Ends
34 295350 1 1 1 1 1 1 1 1 1 1 U-BOLT
Continued

FORM 6252 Fifth Edition 233


225.01

W
A
U
K
E
S
H
A
35

35
36 35
39
35 38

37
36

44
42

40 41 43

52

51

50
45

49
46
47 48

234 FORM 6252 Fifth Edition


225.01
AIR/GAS STARTER

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
35 211260C 4 4 4 4 4 4 4 4 4 4 PIPE, 1-1/4" x 1-5/8", Threaded Both Ends
36 78207S 2 2 2 2 2 2 2 2 2 2 ELBOW, 1-1/4" x 45
37 26070 2 2 2 2 2 2 2 2 2 2 SCREW, Fillister Head, No.10-24 x 2
38 209672 1 1 1 1 1 1 1 1 1 1 MUFFLER, Pneumatic Exhaust
39 69757U 1 1 1 1 1 1 1 1 1 1 VALVE, Solenoid
40 26420 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, No.10
41 21261 2 2 2 2 2 2 2 2 2 2 NUT, No.10
42 304895B 1 1 1 1 1 1 1 1 1 1 BRACKET, Solenoid Valve
43 291677 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 35 mm
44 211910T 1 1 1 1 1 1 1 1 1 1 LABEL, Warning-Maximum Gas Pressure
45 304896D 1 1 1 1 1 1 1 1 1 1 BRACKET, Pipe Support
46 293242 2 2 2 2 2 2 2 2 2 2 WASHER, Flat, M8
47 21051 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, 5/16"
48 290617 2 2 2 2 2 2 2 2 2 2 NUT, Hex, M8
49 291024 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 50 mm
50 291111 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, M10
51 350450 2 2 2 2 2 2 2 2 2 2 WASHER, Flat, M10
52 44893A 2 2 2 2 2 2 2 2 2 2 SPACER

FORM 6252 Fifth Edition 235


225.02

W
A
U
28 17 27
26
44

K
12
18

38

E
25
21

S
23
44
39

H
9

37

A 29
19
2
22
24

3 43
12
9

35
40

34

4
31

44 30

20
41
29 12
1 44 13
32
10
16
5 11

30 42
10
11
14

36
7
33
31
15 6

7
6

236 FORM 6252 Fifth Edition


225.02
AIR/GAS STARTER
HIGH CAPACITY OIL PAN

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 225
1 304894A 1 1 1 1 1 1 1 1 1 1 STARTER, Air/Gas
2 305867V 1 1 1 1 1 1 1 1 1 1 TUBE, Oil Supply
3 305867W 1 1 1 1 1 1 1 1 1 1 TUBE, Pressure Delivery
4 211260B 1 1 1 1 1 1 1 1 1 1 PIPE, 1.25" NPT x 3.0"
5 209942C 1 1 1 1 1 1 1 1 1 1 STRAINER, Y
6 293242 4 4 4 4 4 4 4 4 4 4 WASHER, Flat, M8
7 21051 4 4 4 4 4 4 4 4 4 4 WASHER, Lock, M8
8 290617 2 2 2 2 2 2 2 2 2 2 NUT, Hex, M8
9 290393 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 25 mm
10 291111 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, M10
11 290039 2 2 2 2 2 2 2 2 2 2 NUT, Hex, M10
12 Y18813M 3 3 3 3 3 3 3 3 3 3 WASHER, Flat, M16
13 291327 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M16 x 50 mm
14 304896E 1 1 1 1 1 1 1 1 1 1 BRACKET, Starter Pipe Support
15 292032 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M8 x 25 mm
16 211910T 1 1 1 1 1 1 1 1 1 1 LABEL, Warning-Maximum Starter Pressure
17 69757U 1 1 1 1 1 1 1 1 1 1 VALVE, Solenoid
18 209672 1 1 1 1 1 1 1 1 1 1 MUFFLER, Exhaust
19 305867X 1 1 1 1 1 1 1 1 1 1 TUBE, Pressure Delivery
20 305867Y 1 1 1 1 1 1 1 1 1 1 TUBE, Pressure Supply
21 26070 2 2 2 2 2 2 2 2 2 2 SCREW, Flat Head, 10-24 x 2.00"
22 Y18813E 2 2 2 2 2 2 2 2 2 2 WASHER, Flat, M10
23 26420 2 2 2 2 2 2 2 2 2 2 WASHER, Medium Lock, #10
24 21262 2 2 2 2 2 2 2 2 2 2 NUT, Hex, #10
25 304895E 1 1 1 1 1 1 1 1 1 1 BRACKET, Solenoid Valve
26 21055 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, M16
27 290047 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M16 x 35 mm
28 209821 1 1 1 1 1 1 1 1 1 1 PLATE, Name, Start
29 169013H 1 1 1 1 1 1 1 1 1 1 CLIP, Tube
30 211260A 1 1 1 1 1 1 1 1 1 1 PIPE, 1.25" NPT x 2.0"
31 209824G 1 1 1 1 1 1 1 1 1 1 ELBOW, Pipe, 1.25" x 2.0"
32 211260 1 1 1 1 1 1 1 1 1 1 PIPE, 1.25" NPT x 5.0"
33 78228F 1 1 1 1 1 1 1 1 1 1 PLUG, Pipe, Hex Head, 0.75"
34 194840J 1 1 1 1 1 1 1 1 1 1 LUBRICATOR, Air Starter
35 194769D 1 1 1 1 1 1 1 1 1 1 CONNECTOR, Male 0.25 NPT x 12 NPT
36 295350 1 1 1 1 1 1 1 1 1 1 U-BOLT, M8
37 209000A 1 1 1 1 1 1 1 1 1 1 DECAL, Instruction
38 304146 1 1 1 1 1 1 1 1 1 1 RESERVOIR, Oil
39 304765 1 1 1 1 1 1 1 1 1 1 BRACKET, Oil Reservoir
40 199111A 1 1 1 1 1 1 1 1 1 1 ELBOW, Male, 0.25" OD x 0.12" NPT
41 208570B 1 1 1 1 1 1 1 1 1 1 VALVE, Relay
42 194769F 1 1 1 1 1 1 1 1 1 1 CONNECTOR, Male, 0.25" OD x 0.25" NPT
43 169013 1 1 1 1 1 1 1 1 1 1 CLIP, Tube
44 199111U 5 5 5 5 5 5 5 5 5 5 ELBOW, Male, 0.31" OD x 0.25" NPT

FORM 6252 Fifth Edition 237


225.10

W 26
27 2 1

A 28
3

U 5
4

K
7
10

E
23

S
6

H 22 8
7

A
7
25
21 24 2
14

12
15
9

14
13
11
20 11 10
13
19
12

11
10
18

16

17

17

238 FORM 6252 Fifth Edition


225.10
AIR/GAS STARTER CONTROLS
GROUPS 225, 260
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 225
1 21112 2 2 2 2 2 2 2 2 2 2 SCREW, Round Head, No.12 x 1/2"
2 305373 2 2 2 2 2 2 2 2 2 2 GUARD, Start Button
3 209672 1 1 1 1 1 1 1 1 1 1 MUFFLER, Pneumatic Exhaust
4 168693B 1 1 1 1 1 1 1 1 1 1 VALVE, Pilot Control
5 26763 2 2 2 2 2 2 2 2 2 2 SCREW, Drive, No. 4 x 3/16"
6 955204P 1 1 1 1 1 1 1 1 1 1 PLATE, Name-Start
7 199111T 2 2 2 2 2 2 2 2 2 2 ELBOW, Male (Without Instrument Panel)
3 3 3 3 3 3 3 3 3 3 (With Instrument Panel)
8 305375H 1 1 1 1 1 1 1 1 1 1 TUBE, Pressure Delivery, Upper
9 305375J 1 1 1 1 1 1 1 1 1 1 TUBE, Pressure Supply, Upper
10 151270A 1 1 1 1 1 1 1 1 1 1 SPACER
11 169013J 6 6 6 6 6 6 6 6 6 6 CLIP, Tube
12 350450 2 2 2 2 2 2 2 2 2 2 WASHER, Flat, 1/2"
13 294396 3 3 3 3 3 3 3 3 3 3 SCREW, Hex Head, M10 x 45 mm
14 199108J 2 2 2 2 2 2 2 2 2 2 UNION, Tube
15 305375W 1 1 1 1 1 1 1 1 1 1 TUBE, Pressure Delivery, Lower
16 305375X 1 1 1 1 1 1 1 1 1 1 TUBE, Pressure Supply, Lower
17 199111U 2 2 2 2 2 2 2 2 2 2 ELBOW, Male
18 290088 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M12 x 35 mm
19 21054 1 1 1 1 1 1 1 1 1 1 WASHER, Lock, 1/2"
20 Y18813K 1 1 1 1 1 1 1 1 1 1 WASHER, Flat, 1/2"
21 78209W 1 1 1 1 1 1 1 1 1 1 COUPLING, Pipe, 1/8"
(Use with Instrument Panel)
22 194769T 1 1 1 1 1 1 1 1 1 1 CONNECTOR, Male
(Use with Instrument Panel)
23 305375K 1 1 1 1 1 1 1 1 1 1 TUBE, Vent (Use with Instrument Panel)
24 21265 2 2 2 2 2 2 2 2 2 2 NUT, No.12
25 21627 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, No.12
GROUP 260
26 293242 2 2 2 2 2 2 2 2 2 2 WASHER, Flat, M8
27 294524 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M8 x 25 mm
(Use without Instrument Panel)
28 304895C 1 1 1 1 1 1 1 1 1 1 BRACKET, Push Button
(Use without Instrument Panel)

FORM 6252 Fifth Edition 239


258.00

W
A
U 1

K
E
S 2

H
A 3

5 4
9
6

12
15 11
7
10
33 13
16

32
34
31

14

26
30
29
17 18

28

6
27 5

26
25
20
19

21
24
23

22 21

240 FORM 6252 Fifth Edition


258.00
EXHAUST THERMOCOUPLE

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 258
E305833B 1 CONDUIT, Thermocouple-Assembly
D305833B 1 1 1 1 CONDUIT, Thermocouple-Assembly
C305833C 1 1 1 1 CONDUIT, Thermocouple-Assembly
1 305834B 1 1 1 1 1 COVER, Thermocouple Conduit, Top
305834A 1 1 1 1 COVER, Thermocouple Conduit, Top
2 305833B 1 1 1 1 1 COVER, Thermocouple Conduit, Bottom
305833C 1 1 1 1 COVER, Thermocouple Conduit, Bottom
3 951360 1 BUTTON, Plug
4 199137 7 8 8 8 8 10 10 10 10 BUSHING, Strain Relief
5 106026 2 2 2 2 2 2 2 2 2 NUT, Lock, Conduit
6 209611A 2 2 2 2 2 2 2 2 2 SEAL, Conduit
7 207854C 2 2 2 2 2 2 2 2 2 ELBOW, Conduit
8 740112 7 8 8 8 8 10 10 10 10 THERMOCOUPLE, Type-K
9 194929 7 8 8 8 8 10 10 10 10 CONNECTOR, Thermocouple
10 294524 1 1 1 1 1 1 1 1 1 CAPSCREW, Hex Head, M8 x 25 mm
11 21051 1 1 1 1 1 1 1 1 1 WASHER, Lock, 5/16"
12 B277 1 1 1 1 1 1 1 1 1 WASHER, Flat, M8
13 177487G 1 1 1 1 1 1 1 1 1 CLIP, 1" dia.
14 408477 1 1 1 1 1 1 1 1 1 CONDUIT, Thermocouple-Assembly
15 294523 4 4 4 4 4 4 4 4 4 CAPSCREW, Hex Head, M6 x 20 mm
16 294952 8 8 8 8 8 8 8 8 8 WASHER, Flat, M6
17 293340 4 4 4 4 4 4 4 4 4 WASHER, Lock, M6
18 290452 4 4 4 4 4 4 4 4 4 NUT, M6 x 20 mm
19 48406B 5 5 5 5 5 5 5 5 5 SPACER, 13/32" x 3/4" x 1-1/10"
20 305397B 1 1 1 1 1 1 1 1 1 BRACKET, Thermocouple Junction Box
21 291111 4 5 5 5 5 7 7 7 7 WASHER, Lock, M10
22 290044 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 20 mm
23 294506 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, M10 x 55 mm
A211254J 1 1 1 1 1 1 1 1 BOX, Junction (Includes Cover)-Assembly
A214023B 1
24 211254J 1 1 1 1 1 1 1 1 BOX, Junction
214023B 1
25 21264 2 2 2 2 2 2 2 2 2 NUT, Hex, No.10
26 26420 6 6 6 6 6 6 6 6 6 WASHER, Lock, No.10
27 211556B 1 1 1 1 1 1 1 1 1 PANEL, Junction Box
28 69811B 1 1 1 1 1 1 1 1 1 TRACK, Terminal
29 Y18813E 2 2 2 2 2 2 2 2 2 WASHER, Flat, No.10
167843A 1 PANEL, Jack
167842B 1 SWITCH, Selector
30 21093 2 2 2 2 2 2 2 2 CAPSCREW, Round Head, No.8-32 x 3/8"
31 69921 2 2 2 2 2 2 2 2 2 BRACKET, End Mounting
32 69817 1 1 1 1 1 1 1 1 1 PLATE, End
33 69816 10 10 10 10 10 10 10 10 10 BLOCK, Terminal
34 21108 6 6 6 6 6 6 6 6 6 CAPSCREW, Round Head, No.10 -32 x 3/8"
Continued

FORM 6252 Fifth Edition 241


258.01

W
36
35 38 42
41

A
37 43

U
39
38
44

K
39 45

E
40
46

S
H
A

242 FORM 6252 Fifth Edition


258.01
EXHAUST THERMOCOUPLE

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
35 290039 1 2 2 2 2 2 2 2 2 NUT, Hex, M10
36 291677 2 1 1 1 1 2 2 2 2 CAPSCREW, Hex Head, M10 x 35 mm
37 290020 1 2 2 2 2 2 2 2 2 STUD, M10 x 32 mm
38 291111 2 2 2 2 2 2 2 2 2 WASHER, Lock, M10
39 350450 1 2 2 2 2 4 4 4 4 WASHER, Flat, M10
40 194864C 1 2 2 2 2 2 2 2 2 CLIP, Conduit
41 194864D 2 1 1 1 1 2 2 2 2 CLIP, Conduit
42 48406 1 1 1 1 1 1 1 1 SPACER, 13/32" x 3/4" x 3/16"
43 63809E 2 SPACER, 11/32" x 3/4" x 1/2"
44 80297C 1 1 1 1 1 1 1 1 SPACER, 13/32" x 3/4" x 7/16"
45 194863D 2 1 1 1 1 2 2 2 2 BRACKET, Conduit
46 194863C 1 2 2 2 2 2 2 2 2 BRACKET, Conduit

FORM 6252 Fifth Edition 243


260.00

W
A
U 1

K
2

3
4

E 11

S
H
A
18

5
10
6
15 17
10
7 16
12 19
14
21

22
13
9

23
20

29
8
30 24

28
25
26

27

244 FORM 6252 Fifth Edition


260.00
OVERSPEED SHUTDOWN

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 260
1 290452 4 4 4 4 4 4 4 4 4 4 NUT, Hex, M6
2 294952 4 4 4 4 4 4 4 4 4 4 WASHER, Flat, M6
3 293340 4 4 4 4 4 4 4 4 4 4 WASHER, Lock, M6
4 305712D 1 1 1 1 1 1 1 1 1 1 BRACKET, Junction Box Overspeed
5 292451 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, M6 x 30 mm
6 21055 4 4 4 4 4 4 4 4 4 4 WASHER, Lock, M16
7 290046 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, M16 x 40 mm
8 M305627 1 1 1 1 1 1 1 1 1 1 HARNESS Assembly
9 169013F 4 4 4 4 4 4 4 4 4 4 CLIP
10 951049G 2 2 2 2 2 2 2 2 2 2 GRIP, Cord, 1/2" NPT
C211395M 1 1 1 1 1 1 1 1 1 1 BOX, Junction Assembly
11 211395M 1 1 1 1 1 1 1 1 1 1 BOX, Junction
12 295988 4 4 4 4 4 4 4 4 4 4 SEAL, Oil Tight
13 211556H 1 1 1 1 1 1 1 1 1 1 PANEL, Junction Box
14 21260 4 4 4 4 4 4 4 4 4 4 NUT, Hex, No.8-32
15 21049 6 6 6 6 6 6 6 6 6 6 WASHER, Lock, No.10
16 21108 4 4 4 4 4 4 4 4 4 4 SCREW, Round Head, No.10-32 x 3/8"
17 955998M 1 1 1 1 1 1 1 1 1 1 NAMPLATE, Reset
18 955204G 1 1 1 1 1 1 1 1 1 1 NAMPLATE, Overspeed
19 26763 4 4 4 4 4 4 4 4 4 4 SCREW, Parker Head, No.4 x 3/16"
20 69785 1 1 1 1 1 1 1 1 1 1 SWITCH, Digital Overspeed
21 Y18813D 4 4 4 4 4 4 4 4 4 4 WASHER, Flat, No.8
22 21656 4 4 4 4 4 4 4 4 4 4 WASHER, Lock, No.8
23 26258 4 4 4 4 4 4 4 4 4 4 SCREW, Fillister Head, No.8-32 x 5/8"
24 209553 1 1 1 1 1 1 1 1 1 1 BRACKET, Safety Switch Adapter
25 26012 2 2 2 2 2 2 2 2 2 2 SCREW, Round Head, No.12-32 x 1/2"
26 Y18814E 2 2 2 2 2 2 2 2 2 2 WASHER, Flat, No.10
27 69695 1 1 1 1 1 1 1 1 1 1 ADAPTOR
28 152934A 1 1 1 1 1 1 1 1 1 1 SWITCH, Tattletale, Reset
29 21264 2 2 2 2 2 2 2 2 2 2 NUT, Hex, No.10-32 NF
30 208840 1 1 1 1 1 1 1 1 1 1 LABEL, High Voltage Warning

FORM 6252 Fifth Edition 245


262.00 2

W
1 3
3

A 4

U 6

K
5

E
S
H
A 7

8
10

11
12

3 14 9

15 16
13

28
3 17
2
25
18
3
27
24 23
19

25 21
26 22
20

246 FORM 6252 Fifth Edition


262.00
SURGE TANK

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 262
1 WS255173 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 115 mm
2 290393 5 5 5 5 5 5 5 5 5 5 SCREW, Hex Head, M10 x 25 mm
3 291111 11 11 11 11 11 11 11 11 11 11 WASHER, Lock, M10
4 155641 1 1 1 1 1 1 1 1 1 1 CAP, Radiator
5 P311772 1 1 1 1 1 1 1 1 1 1 TANK, Coolant Surge
6 304317 1 1 1 1 1 1 1 1 1 1 GASKET
7 156821 1 1 1 1 1 1 1 1 1 1 GAUGE, Water Level
8 199111F 1 1 1 1 1 1 1 1 1 1 ELBOW, Male
9 78282E 2 2 2 2 2 2 2 2 2 2 PLUG, Pipe, Square Head, 1/2"
10 305478G 1 1 1 1 1 1 1 1 1 1 TUBE, Surge Tank
11 80297B 1 1 1 1 1 1 1 1 1 1 SPACER
12 177487C 1 1 1 1 1 1 1 1 1 1 CLIP
13 290044 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 20 mm
14 P311771 1 1 1 1 1 1 1 1 1 1 BRACKET, Surge Tank
15 294944 3 3 3 3 3 3 3 3 3 3 SCREW, Hex Head, M10 x 75 mm
16 P311770 1 1 1 1 1 1 1 1 1 1 BRACKET, Coolant Tank
17 Y18813H 4 4 4 4 4 4 4 4 4 4 WASHER, Flat, 3/8"
18 21052 4 4 4 4 4 4 4 4 4 4 WASHER, Lock, 3/8"
19 21348 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, 3/8"-16 x 1"
20 21053 4 4 4 4 4 4 4 4 4 4 WASHER, Lock, 7/16"
21 Y18813J 4 4 4 4 4 4 4 4 4 4 WASHER, Flat, 7/16"
22 21901 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, 7/16"-14 x 7/8"
23 294946 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 120 mm
24 119483T 1 1 1 1 1 1 1 1 1 1 PIPE, 3/4"
25 48797T 2 2 2 2 2 2 2 2 2 2 BUSHING, Reducing, 3/4" to 1-3/8"
26 28697 1 1 1 1 1 1 1 1 1 1 PLUG, Pipe, Hex Head, 1"
27 78208J 1 1 1 1 1 1 1 1 1 1 TEE, Pipe, 1"
28 194769K 1 1 1 1 1 1 1 1 1 1 CONNECTER, Male

FORM 6252 Fifth Edition 247


263.00

W
1
2

A 3
4

U 9

K 5

E 6

S
7

8
17 14

H
18 16
15 13
12

A 10

23

11
19 22 24

20
21

26 25

27 29

30
28

20
33
35
34
26

27
31
26

32

248 FORM 6252 Fifth Edition


263.00
FUEL REGULATOR MOUNTING G, GL
GROUPS 213, 263
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GL GLD G GSID GL GLD
GROUP 263
1 194769G 1 1 1 CONNECTOR, 1/2" Tube x 3/8" NPT
C211332 1 1 1 NIPPLE, Fuel Orifice-Assembly
2 211332 1 1 1 NIPPLE, Fuel Orifice
3 305107B 1 1 1 ORIFICE, Fuel
4 44999S 1 1 1 RING, Retaining
5 78282A 1 1 1 PLUG, Pipe, Square Head, 1/8"
6 159249E 1 1 1 ELBOW, Pipe, 1-1/4"
7 100919J 1 1 1 PIPE, 1-1/4" x 6"
8 161592D 1 1 1 ELBOW, Dresser
499702 2 2 2 GASKET, 1-1/4"
9 305530C 1 1 1 TUBE, Balance, For Y692 Regulator
211355E 1 1 1 TUBE, Balance, For S-211 Regulator
10 199030J 1 1 1 PIPE, 1-1/4" to 6-1/2"
11 48797G 1 1 1 BUSHING, Reducing, 1-1/2" to 1-1/4"
12 78282D 1 1 1 PLUG, Pipe, Square Head-Steel, 3/8"
13 78208B 1 1 1 TEE, Pipe, 3/8"
14 199111D 1 1 1 ELBOW, Male
15 290679 3 3 3 SCREW, Hex Head, M10 x 30 mm
16 291111 3 3 3 WASHER, Spring, M10
17 Y18813H 3 3 3 WASHER, Flat, 3/8"
18 305106F 1 1 1 BRACKET, Gas Regulator Mounting
19 21324 4 4 4 SCREW, Hex Head, 5/16"-18 x 2-3/4"
20 B277 5 5 5 WASHER, Flat, 5/16"
21 119901H 4 4 4 SPACER, Bracket Mounting to Regulator
22 26348 1 1 1 SCREW, Hex Head, 5/16"-18 x 3"
23 7915A 1 1 1 PIPE, 3/8" x 3"
24 78212K 1 1 1 BUSHING, Reducing, 1" to 3/8"
25 305926 1 1 1 REGULATOR, Gas (Fisher Y692)
26 21051 6 6 6 WASHER, Lock, 5/16"
27 21181 5 5 5 NUT, Hex, 5/16"-18
28 305109 1 1 1 BRACE, Gas Regulator
305109B 1 1 1 BRACE, Gas Regulator, High Capacity Oil Pan
29 116514V 1 1 1 SPACER, 11/32" x 5/8" x 1"
30 168770W 1 1 1 PIPE, 1-1/2" x 2-3/4"
31 293242 1 1 1 WASHER, Flat, M8
32 290803 1 1 1 SCREW, Hex Head, M8 x 22 mm
33 78210R 1 1 1 ELBOW, Reducing, Male, 2" to 1-1/2"
GROUP 213
34 76883C 1 1 1 PIPE, 2" x 4"
35 169739F 1 1 1 VALVE, Gas Safety

NOTE: The piping arrangement in this group is for use with Impco 200 carburetor only.

FORM 6252 Fifth Edition 249


263.10

W 2

A 1

U
3

K 9
5

E 4

S
H
6
16

A
15 4 7
14
8
13
12

20

10
11
21

22
23
17

18 19

24

25
28
27
26

29

18 32

25

26

30
25
31

250 FORM 6252 Fifth Edition


263.10
FUEL REGULATOR MOUNTING G, GL, GSI

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 263
1 63602 1 1 1 1 1 1 PIPE, 1-1/4" x 1-5/8"
2 78204F 1 1 1 1 1 1 ELBOW, Pipe, 1-1/4" Threaded Both Ends
3 100919F 1 1 1 1 1 1 PIPE, 1-1/4" x 6-1/4"
4 199111D 2 2 2 2 2 2 ELBOW, Male, 1/2" x 3/8"
5 26743 1 1 1 1 1 1 PLUG, Pipe, Hex Head, 1/8"
6 159249E 1 1 1 1 1 1 ELBOW, Pipe, 1-1/4"
7 199030A 1 1 1 1 1 1 PIPE, 1-1/4" x 12" Threaded One End
8 161592D 1 1 1 1 1 1 ELBOW, Dresser
499702 2 2 2 2 2 2 GASKET, 1-1/4"
9 305782A 1 1 1 1 1 1 TUBE, Balance, For Fisher Y962 Regulator
10 168934F 1 1 1 1 1 1 PIPE, 1-1/4" x 5"
11 28543 1 1 1 1 1 1 PLUG, Pipe, Hex Head-Steel, 3/8"
12 78208B 1 1 1 1 1 1 TEE, Pipe, 3/8"
13 290679 3 3 3 3 3 3 SCREW, Hex Head, M10 x 30 mm
14 291111 3 3 3 3 3 3 WASHER, Spring, M10
15 Y18813H 3 3 3 3 3 3 WASHER, Flat, 3/8"
16 305106F 1 1 1 1 1 1 BRACKET, Gas Regulator Mounting
17 21323 4 4 4 4 4 4 SCREW, Hex Head, 5/16"-18 x 2-1/2"
18 B277 5 5 5 5 5 5 WASHER, Flat, 5/16"
19 119901H 4 4 4 4 4 4 SPACER, Bracket Mounting to Regulator
20 21324 1 1 1 1 1 1 SCREW, Hex Head, 5/16"-18 x 2-3/4"
21 118566X 1 1 1 1 1 1 PIPE, 3/8" x 1"
22 78212K 1 1 1 1 1 1 BUSHING, Reducing, 1" to 3/8"
23 48797G 1 1 1 1 1 1 BUSHING, Reducing, 1-1/2" to 1-1/4"
24 305926 1 1 REGULATOR, Gas (Fisher Y692) (11:1 CR)
305926A 1 1 1 1 REGULATOR, Gas (Fisher Y692) (8.7:1 CR)
25 21051 5 5 5 5 5 5 WASHER, Lock, 5/16"
26 21181 5 5 5 5 5 5 NUT, Hex, 5/16"-18
27 116514V 1 1 1 1 SPACER, 11/32" x 5/8" x 1"
116514H 1 1 SPACER, 11/32" x 5/8" x 1-3/16"
28 168770W 1 1 1 1 1 1 PIPE, 1-1/2" x 2-3/4"
29 305109 1 1 1 1 1 1 BRACE, Gas Regulator
305109B 1 1 1 1 1 1 BRACE, Gas Regulator, High Capacity Oil Pan
30 293242 1 1 1 1 1 1 WASHER, Flat, M8
31 290803 1 1 1 1 1 1 SCREW, Hex Head, M8 x 22 mm
32 78210R 1 1 1 1 1 1 ELBOW, Reducing, Male, 2" to 1-1/2"

NOTE: The piping arrangement in this group is for use with the Impco 400VF carburetor only.

FORM 6252 Fifth Edition 251


263.20

W
9
7 8

A
2 10
4

U
6

1
5

K 3 11

E
36
2
35 34 33 14

S
32 15
13

H 7 18
17
12

A
20

30 16
19 14

31

25

21
26

29 22
24

28 25 23
26

24 37
38
2
26

27

252 FORM 6252 Fifth Edition


263.20
FUEL REGULATOR G
GROUPS 213, 263
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GL GLD G GSID GL GLD
GROUP 263
1 290617 2 NUT, Hex, M8
2 293242 5 WASHER, Flat, M8
3 177488E 2 CLIP, 1-7/8" Diameter
4 169013R 2 CLIP, 1/2" Diameter
5 290541 2 SCREW, Hex Head, M8 x 16 mm
6 304156L 1 TUBE, Balance, For S201 Regulator
7 199111D 2 ELBOW, Male
8 161694C 1 PIPE, 1-1/2" x 2"
9 159249B 1 ELBOW, Pipe, 1-1/2"
10 78282A 1 PLUG, Pipe, Square Head-Steel, 1/8"
11 85761D 1 PIPE, 1-1/2" x 6-1/4"
12 161592 1 ELBOW, Dresser
499714 2 GASKET, 1-1/2"
13 209151Y 1 PIPE, 1-1/2" x 25-3/4"
14 78204G 2 ELBOW, Pipe, 1-1/2"
15 85761H 1 PIPE, 1-1/2" x 3"
16 156200K 1 PIPE, 1-1/2" x 9"
17 78282D 1 PLUG, Pipe, Square Head-Steel, 3/8"
18 78208B 1 TEE, Pipe, 3/8"
19 118566X 1 PIPE, 3/8" x 1"
20 78212K 1 BUSHING, Reducing, 1" to 3/8"
21 209678J 1 REGULATOR, Gas (Fisher S201)
22 168770W 1 PIPE, 1-1/2" x 2-3/4"
23 78210R 1 ELBOW, Reducing, Male, 2" to 1-1/2"
24 21181 5 NUT, Hex, 5/16"-18
25 B277 5 WASHER, Flat, 5/16"
26 21051 8 WASHER, Lock, 5/16"
27 290803 1 SCREW, Hex Head, M8 x 22 mm
28 305109 1 BRACE, Gas Regulator
29 116514V 1 SPACER
30 116514E 4 SPACER, Bracket Mounting to Regulator
31 21323 4 SCREW, Hex Head, 5/16"-18 x 2-1/2"
32 290679 3 SCREW, Hex Head, M10 x 30 mm
33 291111 3 WASHER, Spring, M10
34 Y18813H 3 WASHER, Flat, 3/8"
35 305106F 1 BRACKET, Gas Regulator Mounting
36 21324 1 SCREW, Hex Head, 5/16"-18 x 2-3/4"
GROUP 213
37 76883C 1 PIPE, 2" x 4"
38 169739F 1 VALVE, Gas Safety

FORM 6252 Fifth Edition 253


\

263.30

W 2
1

A
4

U 7

K
E 3

S 6
5
8

H
14

13

A 9 11
12

15
10

12
35

16 13

14

33
32

31
17

34
18

30 22
19 7

29

16
28

20

23
21

27

12

13
24
14 25
19
26

254 FORM 6252 Fifth Edition


263.30
FUEL REGULATOR GLD

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GL GLD G GSID GL GLD
GROUP 263
1 26514 4 4 SCREW, Socket Head, 5/16"-18 x 1-1/2"
2 21051 4 4 WASHER, Lock, 5/16"
3 209805P 1 1 PIPE, 2" NPT x 1-1/2", Threaded Both Ends
4 159249C 1 1 ELBOW, Special
5 305420 1 1 FLANGE, Gas Inlet, 2" NPT
6 304745H 1 1 O-RING
7 78282A 2 2 PLUG, Square Head, 1/8"
8 208346M 1 1 PIPE, 2" x 12-1/2", Threaded One End
9 161592E 1 1 ELBOW, Dresser
499931 2 2 GASKET
10 76883D 1 PIPE, 2" x 10", Threaded One End
120036U 1 PIPE, 2" x 18", Threaded One End
11 304701S 1 1 BRACKET, Pipe Support
12 Y18813G 5 5 WASHER, Flat, 1/4"
13 21050 5 5 WASHER, Lock, 1/4"
14 21173 5 5 NUT, Hex, 1/4"-20 N.C.
15 21280 1 1 SCREW, Hex Head, 1/4"-20 N.C.
16 176247 2 2 U-BOLT
17 D209814C 1 1 VALVE, Positional Lock, Assembly
18 211463A 1 1 PIPE, Special, 2" NPT
19 74176 2 2 ELBOW, 2" x 45
20 76883C 1 1 PIPE, 2" x 4", Threaded Both Ends
21 305106H 1 1 BRACKET, Jacket Water Heater
22 305106B 1 1 BRACKET, Jacket Water Heater
23 P315740 1 1 BRACKET, Jacket Water Heater
24 Y18813K 2 2 WASHER, Flat, 1/2"
25 21054 2 2 WASHER, Lock, 1/2"
26 290179 2 2 SCREW, Hex Head, M12 x 30 mm
27 48988H 1 1 PIPE, 2" x 2", Threaded Both Ends
28 A167148G 1 1 REGULATOR, Maxitrol RV91-Assembly
29 65110Y 1 1 PIPE, 1/8" x 1", Threaded Both Ends
30 B5827 1 1 BUSHING, Reducing
31 28543 1 1 PLUG, Square Head, 3/8"
32 78208B 1 1 TEE, Pipe, 3/8"
33 194769G 1 1 CONNECTOR, Male
34 305530B 1 1 TUBE, Balance
35 199111K 1 1 ELBOW, Male

NOTE: The piping arangement in this group is for use with the Impco 600D carburetor only.

FORM 6252 Fifth Edition 255


264.00

W
A
U
K 1

E 3

S
H
2

256 FORM 6252 Fifth Edition


264.00
REAR STUB SHAFT

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 264
1 20221 1 1 1 1 1 1 1 1 1 1 KEY, Square
C176370A 1 1 1 1 1 1 1 1 1 1 STUB SHAFT-Assembly
2 176370A 1 1 1 1 1 1 1 1 1 1 SHAFT, Stub
3 176371A 1 1 1 1 1 1 1 1 1 1 PLATE, Stub Shaft
4 28234 8 8 8 8 8 8 8 8 8 8 SCREW, Hex Head, 5/8"-18 x 2"
5 152879 8 8 8 8 8 8 8 8 8 8 WASHER, Special
6 26865 6 6 6 6 6 6 6 6 6 6 SCREW, Hex Head, 5/8"-11 x 2-1/4"
7 21055 6 6 6 6 6 6 6 6 6 6 WASHER, 5/8"

FORM 6252 Fifth Edition 257


264.10

W
A
U
K
1

E
S 2

H
A 3

258 FORM 6252 Fifth Edition


264.10
FRONT STUB SHAFT

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 264
1 305387 1 1 1 1 1 1 1 1 1 1 SHAFT, Front Stub
2 291107 12 12 12 12 12 12 12 12 12 12 WASHER, Lock, M12
3 295869 12 12 12 12 12 12 12 12 12 12 SCREW, Hex Head, M12 x 55 mm

FORM 6252 Fifth Edition 259


266.00

W
A 43

U
4
3 42
42
2

K
40

E 22
40

S
41
12 41
13
6

H
8 5

A
25

24
17

9
10

11

16
12
15 13
39
14
13
18
17

12
23
22
33
12
38 19 13
20
17
12 25
13
32 21 26
22
34 12
32
30 13 29
28 27
37 17
36
30
24 33

28 34 32

35
32 31

260 FORM 6252 Fifth Edition


266.00
JACKET WATER HEATER

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 266
1 954842 1 1 1 1 1 1 1 1 1 1 COVER, Outlet
2 21126 2 2 2 2 2 2 2 2 2 2 SCREW, Fillister Head, No. 10-24 x 1/2"
3 954841 1 1 1 1 1 1 1 1 1 1 BOX, Outlet
4 169013 1 1 1 1 1 1 1 1 1 CLIP, 1/4"
5 954847E 1 1 1 1 1 1 1 1 1 1 CONTROL, Temperature
6 154570B 4 4 4 4 4 4 4 4 4 4 MOUNT, Anti-vibration
7 305182G 1 1 1 1 1 1 1 1 1 1 BRACKET, Temperature Control
8 80297C 2 2 2 2 2 2 2 2 2 2 SPACER
9 48406R 2 2 2 2 2 2 2 2 2 2 SPACER
10 21536 8 8 8 8 8 8 8 8 8 8 WASHER, Lock, Plated, 1/4"
11 21175 8 8 8 8 8 8 8 8 8 8 NUT, Jam, 1/4"-20
12 293242 15 15 15 15 15 15 15 15 15 15 WASHER, Flat, M8
13 21051 10 10 10 10 10 10 10 10 10 10 WASHER, Lock, 5/16"
14 295798 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, M8 x 90 mm
15 21261 2 2 2 2 2 2 2 2 2 2 NUT, Hex, No. 10-24
16 21049 2 2 2 2 2 2 2 2 2 2 WASHER, Lock, No. 10
17 290617 6 6 6 6 6 6 6 6 6 6 NUT, Hex, M8
18 305182L 1 1 1 1 1 1 1 1 1 1 BRACKET, Jacket Water Heater
19 350450 3 3 3 3 3 3 3 3 3 3 WASHER, Flat, M10
20 291111 4 4 4 4 4 4 4 4 4 4 WASHER, Lock, M10
21 290478 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M10 x 40 mm
22 291102 6 6 6 6 6 6 6 6 6 6 SCREW, Hex Head, M8 x 20 mm
23 305182J 1 1 1 1 1 1 1 1 1 1 BRACKET, Upper Pipe Support
24 177487G 4 4 4 4 4 4 4 4 4 4 CLIP
25 177488D 2 2 2 2 2 2 2 2 2 2 CLIP, Tube, 1-7/8"
26 305298 1 1 1 1 1 1 1 1 1 1 STRAP
27 119483T 1 1 1 1 1 1 1 1 1 1 PIPE, 3/4" x 1-3/8" Threaded Both Ends
28 28697 2 2 2 2 2 2 2 2 2 2 PLUG, Pipe, 1"
29 48797T 1 1 1 1 1 1 1 1 1 1 BUSHING, Reducing, 1" to 3/4"
30 78208J 3 3 3 3 3 3 3 3 3 3 TEE, Pipe, 1"
31 78204E 1 1 1 1 1 1 1 1 1 1 ELBOW, 90 Pipe, 1" NPT
32 154909E 4 4 4 4 4 4 4 4 4 4 PIPE, 1" x 1-1/2" Threaded Both Ends
33 207585C 2 2 2 2 2 2 2 2 2 2 VALVE, Ball, 1" NPT
34 199111G 2 2 2 2 2 2 2 2 2 2 ELBOW, Male
35 305183X 1 1 1 1 1 1 1 1 1 1 TUBE, Heater Supply, Inlet (Early Models)
36 78212J 1 1 1 1 1 1 1 1 1 1 BUSHING, Reducing, 1-1/4"
37 76400 1 1 1 1 1 1 1 1 1 1 COCK, Drain
38 85793T 1 1 1 1 1 1 1 1 1 1 PIPE, 1" x 1-3/4" Threaded Both Ends
39 78212V 1 1 1 1 1 1 1 1 1 1 REDUCER, Pipe, 2-1/2" to 2"
40 209611 4 4 4 4 4 4 4 4 4 4 SEAL, Conduit Connector
41 106043 1 1 1 1 1 1 1 1 1 1 NUT, Lock, Conduit
42 207854A 1 1 1 1 1 1 1 1 1 1 ELBOW, Connector, Insulated Conduit
43 408677 1 1 1 1 1 1 1 1 1 1 CONDUIT
Continued

FORM 6252 Fifth Edition 261


266.01

W
A
U
K 59

E
58

56

S
H
A
57
55

51
50 52
53
54

45

49

48
44

45
47
46

262 FORM 6252 Fifth Edition


266.01
JACKET WATER HEATER

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
44 63809B 4 4 4 4 4 4 4 4 4 4 SPACER
45 209816 4 4 4 4 4 4 4 4 4 4 STRAP, Heater Housing
46 WS808402 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, M8 x 75 mm
47 209815 1 1 1 1 1 1 1 1 1 1 HOUSING, Water Heater
48 209107M 1 1 1 1 1 1 1 1 1 1 LABEL, Caution
49 194769L 1 1 1 1 1 1 1 1 1 1 CONNECTOR, Male
50 305183Y 1 1 1 1 1 TUBE, Heater Supply Outlet
305183Z 1 1 1 1 1 TUBE, Heater Supply Outlet
51 P276091 2 2 2 2 2 2 2 2 2 2 WASHER, Cupped Reducing
52 106043 3 3 3 3 3 3 3 3 3 3 NUT, Lock, Conduit, 1/2"
53 209611 4 4 4 4 4 4 4 4 4 4 SEAL, Conduit Connector 3/8" - 1/2"
54 207854A 4 4 4 4 4 4 4 4 4 4 ELBOW, Insulated Conduit, 1/2"
55 153478S 1 1 1 1 1 1 1 1 1 1 HEATER, Immersion 120V
153478T 1 1 1 1 1 1 1 1 1 1 HEATER, Immersion 240V
56 211900 1 1 1 1 1 1 1 1 1 1 LABEL, Danger-Electrical Source
57 199111V 1 1 1 1 1 1 1 1 1 1 ELBOW, Male
58 350890D 1 1 1 1 1 1 1 1 1 1 ADAPTER, 3/4" NPT x M27
59 304740 1 1 1 1 1 1 1 1 1 1 WASHER, Copper

FORM 6252 Fifth Edition 263


266.02

W
A 15

U
14 1

K
E 21

S 16
14
15

H 20

A 11

10
11
7 2

22
11

19
18

17
16
4 15
14 24 23
12 21
8 1 3
13

6
25
11

5
20 4

264 FORM 6252 Fifth Edition


266.02
JACKET WATER HEATER
HIGH CAPACITY OIL PAN

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 266
1 290393 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M10 x 25 mm
2 A305182N 1 1 1 1 1 1 1 1 1 1 BRACKET, Jacket Water Heater
3 151037D 4 4 4 4 4 4 4 4 4 4 UNION, Straight Adapter, 1"
4 78204E 1 1 1 1 1 1 1 1 1 1 ELBOW, 90 Pipe, 1" NPT
5 307089A 1 1 1 1 1 TUBE, Heater Supply, Inlet
307089C 1 1 1 1 1
6 A166188W 1 1 1 1 1 HOSE, Flexible Assembly
A166188U 1 1 1 1 1
7 153478S 1 1 1 1 1 1 1 1 1 1 HEATER, Immersion 120 VAC
153478T 1 1 1 1 1 1 1 1 1 1 HEATER, Immersion 240 VAC
8 119434W 1 1 1 1 1 1 1 1 1 1 PIPE, 1/2" NPT x 1-1/4"
9 293242 6 6 6 6 6 6 6 6 6 6 WASHER, Flat, M8
10 21051 8 8 8 8 8 8 8 8 8 8 WASHER, Lock, M8
11 194769L 2 2 2 2 2 2 2 2 2 2 CONNECTOR, Male, 1" NPT
12 78208C 2 2 2 2 2 2 2 2 2 2 TEE, Pipe, 1/2"
13 78212T 1 1 1 1 1 1 1 1 1 1 BUSHING, Reducing, 1" to 1/2" NPT
14 350450 3 3 3 3 3 3 3 3 3 3 WASHER, Flat, M10
15 291111 4 4 4 4 4 4 4 4 4 4 WASHER, Lock, M10
16 290039 4 4 4 4 4 4 4 4 4 4 NUT, Hex, M10
17 28677 1 1 1 1 1 1 1 1 1 1 PLUG, Pipe, 1"
18 208922A 1 1 1 1 1 1 1 1 1 1 VALVE, Pressure Relief
19 WS809173 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M8 x 18 mm
20 199111G 4 4 4 4 4 4 4 4 4 4 ELBOW, 90 Pipe, 1" NPT
21 177487G 2 2 2 2 2 2 2 2 2 2 CLIP, Tube, 1"
22 209816 2 2 2 2 2 2 2 2 2 2 STRAP
23 119483T 1 1 1 1 1 1 1 1 1 1 PIPE, 3/4" x 1-3/8", Threaded Both Ends
24 28697 2 2 2 2 2 2 2 2 2 2 PLUG, Pipe, 1"
25 48797T 1 1 1 1 1 1 1 1 1 1 BUSHING, Reducing, 1" to 3/4"

FORM 6252 Fifth Edition 265


266.03

W
A
U
35 36

29 38

K
37

E
S 30

H
A
31

28
29

39 42
46
44 34

27

41
40 27
45
46
43

28 26

32

27

33

266 FORM 6252 Fifth Edition


266.03
JACKET WATER HEATER
HIGH CAPACITY OIL PAN

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 266
26 78208J 3 3 3 3 3 3 3 3 3 3 TEE, Pipe, 1"
27 154909E 4 4 4 4 4 4 4 4 4 4 PIPE, 1" x 1-1/2" Threaded Both Ends
28 207585C 2 2 2 2 2 2 2 2 2 2 VALVE, Ball, 1" NPT
29 199111V 2 2 2 2 2 2 2 2 2 2 ELBOW, Male
30 307089 1 1 1 1 1 TUBE, Heater Supply, Inlet
307089B 1 1 1 1 1 TUBE, Heater Supply, Inlet
31 307092 1 1 1 1 1 1 1 1 1 1 TUBE, Jacket Water Heater
32 76400 1 1 1 1 1 1 1 1 1 1 COCK, Drain
33 85793T 1 1 1 1 1 1 1 1 1 1 PIPE, 1" x 1-3/4" Threaded Both Ends
34 78212V 1 1 1 1 1 1 1 1 1 1 REDUCER, Pipe, 2-1/2" to 2"
35 350890D 1 1 1 1 1 1 1 1 1 1 ADAPTER, 3/4" NPT - M27
36 340740 1 1 1 1 1 1 1 1 1 1 WASHER, Copper
37 WS808394 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M8 x 35 mm
38 168847E 1 1 1 1 1 1 1 1 1 1 BRACE, Tube
39 177487C 1 1 1 1 1 1 1 1 1 1 CLIP
40 168847E 1 1 1 1 1 1 1 1 1 1 BRACE, Tube
41 116514H 1 1 1 1 1 1 1 1 1 1 SPACER
42 290617 1 1 1 1 1 1 1 1 1 1 NUT, Hex, M8
43 WS808398 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M8 x 55 mm
44 291102 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M8 x 20 mm
45 293242 1 1 1 1 1 1 1 1 1 1 WASHER, Flat, M8
46 21051 1 1 1 1 1 1 1 1 1 1 WASHER, Lock, M8

FORM 6252 Fifth Edition 267


273.00

W
A
U
K 2
1

E
3
4

S
H
A
9
5 11
13
6 10

8 7

14
2 3
17
16

18
2 3

15
11

19 11 12 23

11

22
2

3
21
20

268 FORM 6252 Fifth Edition


273.00
ALTERNATOR GUARD

ITEM PART F18 H24


DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 273
1 A305694 1 1 1 1 1 1 1 1 1 1 GUARD, Crankshaft Pulley-Assembly
2 293242 16 16 16 16 16 16 16 16 16 16 WASHER, Flat, M8
3 21051 14 14 14 14 14 14 14 14 14 14 WASHER, Lock, 5/16"
4 290541 8 8 8 8 8 8 8 8 8 8 SCREW, Hex Head, M8 x 16 mm
290498 8 8 8 8 8 8 8 8 8 8 SCREW, Hex Head, M8 x 12 mm, CSA
5 305695A 1 1 1 1 1 1 1 1 1 1 COVER, Pulley Guard Front
6 294952 6 6 6 6 6 6 6 6 6 6 WASHER, Flat, M6
7 293340 6 6 6 6 6 6 6 6 6 6 WASHER, Lock, M6
8 291596 6 6 6 6 6 6 6 6 6 6 SCREW, Hex Head, M6 x 10 mm
9 A305695F 1 1 1 1 1 1 1 1 1 1 COVER, Alternator Guard-Assembly
10 305693C 1 1 1 1 1 1 1 1 1 1 GUARD, Alternator
11 28470 10 10 10 10 10 10 10 10 10 10 SCREW, Flange Head, 5/16"-18 x 5/8"
12 117858 1 1 1 1 1 1 1 1 1 1 GROMMET, Rubber
13 A305693D 1 1 1 1 1 1 1 1 1 1 GUARD, Left Alternator-Assembly
14 A305849 1 1 1 1 1 1 1 1 1 1 GUARD, Alternator Belt-Assembly
15 292032 2 2 2 2 2 2 2 2 2 2 SCREW, Hex Head, M8 x 25 mm
16 305688D 1 1 1 1 1 1 1 1 1 1 BRACKET, Alternator Belt Guard Support
17 290617 2 2 2 2 2 2 2 2 2 2 NUT, Hex, M8
18 290498 4 4 4 4 4 4 4 4 4 4 SCREW, Hex Head, M8 x 12 mm
19 G305692 1 1 1 1 1 1 1 1 1 1 GUARD, Alternator Belt-Assembly
20 291102 1 1 1 1 1 1 1 1 1 1 NUT, Hex M8
21 A305693E 1 1 1 1 1 1 1 1 1 1 GUARD ASSEMBLY, Alternator, CSA
22 305693F 1 1 1 1 1 1 1 1 1 1 GUARD, Alternator, Rear, CSA
23 WS808292 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Head, M8 x 25 mm

FORM 6252 Fifth Edition 269


294.00

W
A 1

U
K
E
S
H 2

A
18

3
4

2 14 5 7

6 8

17

16
10
13 9
12

15
11

270 FORM 6252 Fifth Edition


294.00
KNOCK DETECTION MODULE KDM
GROUPS 65, 294
ITEM PART F18 H24
DESCRIPTION
NO. NUMBER G GSID GSI GL GLD G GSID GSI GL GLD
GROUP 294
1 DA209250 1 1 1 1 CONDUIT-Assembly, Wiring, CSA Ignition
GA209250* *Use with Junction Box Bracket P/N 305944A
CA209250 1 1 1 1 CONDUIT-Assembly, Wiring, CSA Ignition
HC209250* *Use with Junction Box Bracket P/N 305944A
2 740110B 2 2 2 2 2 2 2 2 SENSOR, Knock Control
3 169013K 1 1 1 1 1 1 1 1 CLIP, 3/8"
4 294523 3 3 3 3 3 3 3 3 SCREW, Hex Head, M6 x 20 mm
5 294592 3 3 3 3 3 3 3 3 WASHER, Flat, M6
6 740416 1 1 1 1 1 1 1 1 MODULE, KDM Control
7 A740222J 1 1 1 1 HARNESS, KDM Box To Sensors-Assembly
A740222K 1 1 1 1 HARNESS, KDM Box To Sensors-Assembly
8 C740224 1 1 1 1 HARNESS, KDM To Junction Box-Assembly
E740224* 1 1 1 1 *Use with Junction Box Bracket P/N 305944A
A740224 1 1 1 1 HARNESS, KDM To Junction Box-Assembly
D740224* 1 1 1 1 *Use with Junction Box Bracket P/N 305944A
9 290452 3 3 3 3 3 3 3 3 NUT, Hex, M6
10 293340 3 3 3 3 3 3 3 3 WASHER, Lock, M6
11 177487G 5 5 5 5 5 5 5 5 CLIP
12 291677 3 3 3 3 3 3 3 3 SCREW, Hex Head, M10 x 35 mm
13 291111 3 3 3 3 3 3 3 3 WASHER, Lock, M10
14 169013 1 1 1 1 1 1 1 1 CLIP, 1/4"
15 305120 1 1 1 1 1 1 1 1 STRAP, Tube Support
740034 1 1 1 1 1 1 1 1 MANUAL-Assembly (Not Illustrated)
GROUP 65
16 305945 1 1 1 1 1 1 1 1 BRACKET, KDM Control Box (Use with gear
housing mounted breather systems)
17 305633C 1 1 1 1 BRACKET, KDM With Baffle Box (Replaces
standard baffle box)
18 305067A 1 1 1 1 1 1 1 1 GASKET, Baffle Box

FORM 6252 Fifth Edition 271


NOTES

272 FORM 6252 Fifth Edition


Appendix A
VGF F18/H24G/GSID/GL/GLD PART NUMBER INDEX

NUMBER GROUP ITEM NUMBER GROUP ITEM NUMBER GROUP ITEM

SERVICE REPAIR KITS 116514 H 223.10 5 151270 A 225.10 10


G-907-230 004.00 223.20 5 151270 H 070.80 10
G-907-240 004.00 263.10 27 070.90 10
G-911-16 011.00 266.03 41 151813 057.00 11
G-918-318 011.00 116514 N 223.20 11 151814 B 057.00 8
G-918-320 011.00 116514 U 223.10 5 C 151814 B 057.00
G-918-340 011.00 116514 V 263.00 29 151815 057.00 7
G-918-341 011.00 263.10 27 151995 C 031.00 6
G-927-55 023.01 263.20 29 031.10 2
G-927-56 023.01 117053 B 068.10 6 152879 264.00 5
G-932-264 004.00 117234 C 017.10 4 152934 213.00 8
G-932-279 004.00 035.10 16 152934 A 260.00 28
G-960-274 061.00 061.10 5 153271 033.00 28
G-960-298 060.00 117488 J 038.00 4 153271 B 033.00 27
G-960-299 060.00 117686 223.10 12 153272 A 033.00 26
G-977-60 002.01 117858 273.00 12 153374 F 041.00 28
G-977-67 002.01 118013 F 070.40 31 153399 028.01 41
G-978-31 014.00 070.50 32 153402 A 027.01 20
G-978-32 014.00 070.60 31 153402 E 027.01 20
G-979-276 002.01 070.80 16 153402 F 027.01 25
G-979-278 002.01 070.90 16 047.10 10
G-979-288 002.01 118013 K 070.30 20 214.50 22
G-979-289 002.01 118566 X 070.31 46 214.60 11
G-980-166 080.01 263.10 21 153402 G 027.01 20
G-980-167 080.01 263.20 19 153402 P 079.00 9
118799 203.00 5 153419 214.60 10
MAINTENANCE KITS 118799 E 203.10 1 153462 A 068.00 37
G-962-1620 055.10 A 118799 E 203.10 068.20 41
G-962-1621 055.10 D 118799 203.00 153478 S 266.01 55
118879 R 214.40 3 266.02 7
1 118925 E 067.00 9 153478 T 266.01
100831 J 022.10 23 118996 A 022.40 28 266.02 7
068.00 9 119055 070.40 34 153610 021.00
070.50 35 153789 208.00 4
100831 W 068.00 5
100832 J 068.00 38 070.60 34 208.10 9
068.10 3 119111 D 100.00 13 208.20 1
119111 S 100.00 13 208.30 1
068.20 38
070.30 14 119111 T 202.01 50 208.40 3
100834 L 045.00 14 119434 W 070.00 26 208.50 4
266.02 8 153790 208.00 5
100919 F 263.10 3
100919 J 263.00 7 119483 E 068.10 7 208.10 8
101023 B 061.10 3 119483 T 070.31 208.20 2
262.00 24 208.30 2
101023 K 061.10 33
105675 070.80 3 266.00 27 208.40 4
070.90 3 266.02 23 208.50 5
119627 085.00 20 154570 B 266.00 6
106026 258.00 5
106043 022.00 39 202.00 7 154813 B 070.90 31
022.50 15 119901 H 263.00 21 154813 D 017.10 1
263.10 19 154813 H 017.10 21
028.10 9
068.00 16 11990 K 070.80 14 035.10 27
070.90 14 061.10 27
068.10 17
068.20 27 120036 U 263.30 070.20 1
266.00 41 120132 J 042.00 13 070.30 4
120132 L 017.10 14 070.70 23
266.01 52
10643 022.10 37 120148 C 031.00 3 154813 J 070.40 27
109263 070.80 26 031.10 3 070.50 27
120572 208.00 26 070.60 27
070.90 26
111380 070.10 4 208.10 18 154909 E 266.00 32
111625 B 213.00 15 208.20 16 266.03 27
208.30 15 154981 B 031.30 11
116015 A 068.10 10
116015 M 061.10 31 208.40 11 100.00 2
116514 D 202.00 3 208.50 12 155553 C 025.00 1
15027 D 064.00 7 D 155553 C 025.00
214.40 10
116514 E 263.20 30 079.00 10 155641 262.00 4
151037 D 266.02 3 155997 X 214.40 4

FORM 6252 Fifth Edition A-1


Appendix A
VGF F18/H24G/GSID/GL/GLD PART NUMBER INDEX

NUMBER GROUP ITEM NUMBER GROUP ITEM NUMBER GROUP ITEM

156200 K 263.20 16 167840 B 061.00 14 169013 L 022.30 13


156339 C 031.00 20 167842 B 258.00 169013 P 027.02 55
031.10 21 167843 A 258.00 070.70 26
156821 262.00 7 168013 D 047.10 4 100.00 10
157255 A 100.00 11 208.00 13 100.10 16
157255 J 100.10 5 208.10 21 169013 R 263.20 4
157872 D 203.10 16 208.20 9 169013 V 022.30 18
D 157872 D 203.10 208.30 22 022.50 33
158283 204.00 1 168042 047.10 5 169013 W 022.40 25
158358 017.10 19 070.30 29 169013 Y 022.00 42
158417 085.10 1 208.20 10 022.10 40
159166 D 070.00 7 168273 B 031.10 169013 Z 028.01 42
070.40 29 168290 A 041.00 17 169158 027.02 45
070.50 30 072.00 3 169180 K 208.20 13
070.60 29 168290 B 033.00 4 208.40 8
159166 E 070.00 11 168334 F 047.10 10 208.50 9
159249 B 214.20 24 168439 J 068.00 4 169180 L 208.00 19
263.20 9 068.10 29 208.10 11
159249 C 263.30 4 068.20 21 208.30 12
159249 E 263.00 6 168597 045.00 18 169568 C 214.20 2
263.10 6 B 1686 202.01 40 169739 F 263.00 35
159447 C 208.00 24 168693 B 225.10 4 263.20 38
159477 067.00 6 168700 042.00 3 169741 H 202.00 22
161160 L 068.10 23 042.00 7 169741 M 202.00 19
161541 F 070.00 13 047.10 11 169742 G 202.01
070.40 8 168770 W 263.00 30 169742 L 202.01 42
070.50 10 263.10 28 169905 214.30 2
070.60 4 263.20 22 176247 068.11 33
E 161541 B 070.70 10 168847 E 093.01 35 070.30 26
161592 214.40 12 266.03 38 263.30 16
263.20 12 266.03 40 176370 A 264.00 2
161592 D 263.00 8 168847 S 022.40 24 C 176370 A 264.00
263.10 8 168847 W 070.00 31 176371 A 264.00 3
161592 E 263.30 9 168904 070.10 1 176774 A 027.00 2
161694 C 061.10 2 168934 F 263.10 10 177053 B 068.00 3
070.30 31 169013 064.00 17 177088 017.40 8
214.20 26 070.40 17 177381 A 070.30 23
263.20 8 070.50 22 203.00 8
161699 214.00 14 070.60 19 203.10 13
161699 C 208.00 8 093.00 27 177487 C 027.02 56
161699 E 208.00 11 202.01 48 093.01 33
161944 C 213.00 9 213.00 2 262.00 12
161944 K 068.20 10 225.00 8 266.03 39
162557 022.10 21 225.02 43 177487 G 258.00 13
022.40 14 266.00 4 266.00 24
068.20 5 294.00 14 266.02 21
163853 V 031.10 6 169013 F 202.00 31 294.00 11
163853 Y 031.10 260.00 9 177488 D 035.10 18
164529 K 031.00 1 169013 G 021.00 22 266.00 25
164659 E 202.01 34 093.00 20 177488 E 017.10 15
164972 H 214.40 13 202.00 13 263.20 3
A 166182 N 202.01 39 169013 H 022.01 43 177488 F 070.20 6
A 166188 U 266.02 6 022.11 43 070.60 18
A 166188 W 266.02 6 225.00 25 WS 177913 028.00 3
166990 C 070.30 15 225.02 29 067.00 35
A 166990 C 070.30 169013 J 225.10 11 WS 177985 053.00 11
166991 A 070.30 16 169013 K 022.00 12 WS 178747 053.00 2
166992 A 070.30 21 022.30 11 WS 178929 053.00 6
166993 D 070.30 17 022.50 10 Y 18802 038.00 8
A 166993 D 070.30 027.02 55 070.70 19
A 167148 G 263.30 28 031.00 14 Y 18813 D 260.00 21
167824 K 041.00 25 031.10 15
072.00 12 031.30 16
167840 041.00 16 070.00 18
072.00 2 294.00 3

A-2 FORM 6252 Fifth Edition


Appendix A
VGF F18/H24G/GSID/GL/GLD PART NUMBER INDEX

NUMBER GROUP ITEM NUMBER GROUP ITEM NUMBER GROUP ITEM

Y 18813 E 022.00 194769 N 031.00 9 199810 K 202.00 32


022.20 9 031.10 18
068.00 23 067.00 29 2
068.20 24 194769 P 068.20 20 C 200224 A 014.10 21
225.02 22 070.31 E 200224 014.10 8
258.00 29 194769 T 225.10 22 20221 264.00 1
Y 18813 G 031.30 3 194840 J 225.00 14 207313 C 093.01 37
068.11 35 225.02 34 101.00 12
070.30 37 194863 C 258.01 46 207317 B 070.40 18
263.30 12 194863 D 258.01 45 070.50 21
Y 18813 H 022.01 49 194864 C 258.01 40 207331 028.00 19
022.51 40 194864 D 258.01 41 207472 203.00 6
031.20 7 194929 085.00 4 203.10 3
047.10 3 258.00 9 207482 W 061.00
070.10 6 194929 B 085.00 8 20751 B 070.10 3
070.20 5 199030 A 263.10 7 070.20 17
070.20 10 199030 J 263.00 10 070.30 3
070.30 35 199066 C 068.20 25 070.60 2
101.00 6 199066 H 202.00 27 070.70 3
208.00 17 199074 022.10 24 A 207530 D 208.00 20
262.00 17 199108 C 070.00 21 208.10 12
263.00 17 199108 J 225.10 14 207585 A 055.10 10
263.10 15 199110 B 070.40 22 207585 C 266.00 33
263.20 34 070.50 17 266.03 28
Y 18813 J 262.00 21 070.60 15 207585 F 070.40 5
Y 18813 K 020.01 58 199111 A 031.00 12 070.50 7
028.00 14 031.10 9 207585 H 070.31 45
225.10 20 031.30 7 207585 J 070.31
263.30 24 093.00 29 207637 P 068.00 18
Y 18813 M 213.00 25 225.00 6 068.20 36
225.00 3 225.02 40 207637 R 068.10 19
225.02 12 199111 B 031.10 10 207637 U 068.10 21
Y 18814 E 260.00 26 031.30 5 068.20 30
Y 18814 H 214.20 5 070.00 28 207637 V 068.20 29
Y 18814 K 214.20 3 199111 D 263.00 14 207804 G 047.10 6
Y 18814 M 057.00 12 263.10 4 207804 H 047.10 6
208.00 29 263.20 7 207853 X 022.00 20
Y 18983 A 028.00 22 199111 F 262.00 8 022.20 7
Y 18983 B 028.00 21 199111 G 266.00 34 207854 028.10 11
Y 18983 D 028.00 20 266.02 20 207854 A 068.00 17
Y 18994 B 068.20 12 199111 H 031.00 8 068.10 18
194628 G 068.10 20 199111 J 021.00 16 068.20 26
194769 031.30 13 031.10 7 266.00 42
070.00 16 068.20 17 266.01 54
194769 A 070.31 44 199111 K 263.30 35 207854 C 258.00 7
194769 D 093.00 1 199111 L 100.00 1 207855 A 068.20 28
225.00 13 199111 M 068.10 16 208007 A 031.10 19
225.02 35 070.31 031.20 11
194769 E 068.20 13 100.10 10 202.00 15
070.40 10 199111 N 067.00 27 A 208272 208.00 22
070.50 12 070.00 24 208.10 14
070.60 12 070.31 41 208346 M 263.30 8
093.00 5 199111 T 225.10 7 208349 208.00 21
202.01 43 199111 U 225.00 20 208.10 13
194769 F 225.00 24 225.02 44 208.30 13
225.02 42 225.10 17 208349 A 208.20 14
194769 G 027.01 41 199111 V 266.01 57 208.40 9
100.10 12 266.03 29 208.50 10
263.00 1 199137 258.00 4 208439 C 203.00 11
263.30 33 199358 B 203.00 13 C 208439 C 203.00
194769 K 027.02 52 203.10 18 TA 208479 D 022.10
262.00 28 199358 C 203.00 9 208497 C 022.40 17
194769 L 266.01 49 203.10 14 208497 D 022.40 6
266.02 11 199415 J 045.00 13 H 208497 D 022.40
194769 M 100.00 5 199434 Y 100.10 15

FORM 6252 Fifth Edition A-3


Appendix A
VGF F18/H24G/GSID/GL/GLD PART NUMBER INDEX

NUMBER GROUP ITEM NUMBER GROUP ITEM NUMBER GROUP ITEM

XA 208497 D 022.40 209611 022.00 17 21050 (cont.) 070.30 11


208499 022.00 6 022.10 38 070.40 19
022.10 18 022.50 16 070.50 20
022.10 33 028.10 10 070.60 10
022.40 8 266.00 40 070.70 12
208499 A 022.40 11 266.01 53 070.80 6
A 208502 G 022.40 13 209611 A 258.00 6 070.90 6
208503 J 022.40 7 209672 225.01 38 080.01 36
208503 N 022.10 19 225.02 18 093.01 31
208505 A 022.40 9 225.10 3 100.00 17
208527 F 068.00 13 209678 J 263.20 21 100.10 7
068.20 9 209681 022.01 56 101.00 15
208527 G 068.00 11 022.11 60 202.00 8
068.20 7 022.30 25 202.00 25
208546 022.10 25 022.41 41 203.10 9
022.40 12 022.51 48 204.00 6
208570 B 225.00 19 C 209765 A 022.40 208.00
225.02 41 209788 070.30 27 213.00 11
208840 260.00 30 209805 P 263.30 3 214.20 31
208922 A 266.02 18 209808 L 202.00 33 214.50 7
208963 017.30 1 D 209814 C 263.30 17 214.60 4
208964 017.30 3 209815 266.01 47 223.10 2
208966 017.30 12 209816 266.01 45 223.20 2
AA 208968 C 017.30 2 266.02 22 225.01 47
AC 208968 D 017.30 209821 225.00 23 225.02 7
208974 017.30 11 225.02 28 258.00 11
209000 A 225.00 5 209824 G 225.00 18 263.00 26
225.02 37 225.02 31 263.10 25
209107 M 266.01 48 209942 C 225.00 32 263.20 26
209151 K 068.10 11 225.02 5 263.30 2
209151 Y 263.20 13 209992 G 002.11 28 266.00 13
209155 025.00 17 21049 022.00 21 266.02 10
031.20 17 022.20 4 266.03 46
F 209190 070.30 25 022.50 20 273.00 3
209195 A 070.30 24 068.00 24 21052 027.00 4
209241 F 085.00 29 085.10 15 031.20 8
209244 Z 022.50 19 260.00 15 047.10
CA 209250 294.00 266.00 16 061.10 10
DA 209250 294.00 1 21050 022.40 32 070.20 8
GA 209250 022.40 031.30 2 070.30 34
294.00 041.00 30 070.70 28
HC 209250 022.40 10 068.11 36 093.00 8
294.00 070.10 7 101.00 7
209255 M 068.10 2 070.30 38 203.10 11
209255 P 068.10 214.00 12 214.30 4
209255 U 068.10 5 263.30 13 214.40 17
209377 K 202.00 16 21051 017.10 11 262.00 18
C 209378 B 202.00 14 022.00 8 21053 262.00 20
209486 041.00 23 022.10 6 21054 017.20 5
072.00 9 022.30 8 017.40 6
209553 260.00 24 022.40 20 028.00 15
209580 085.10 23 022.50 5 225.10 19
209585 G 085.10 24 027.02 62 263.30 25
209585 H 085.10 24 031.10 4 21055 204.00 2
209585 J 085.10 24 031.20 5 208.00 28
209586 085.10 20 035.10 8 219.00 2
209586 B 085.10 20 035.10 33 225.02 26
209603 C 085.10 21 041.00 35 260.00 6
209603 D 085.10 21 041.01 37 264.00 7
A 209603 D 085.10 21 045.00 17 21089 022.50 25
061.10 25 21093 258.00 30
068.00 20 21100 068.00 19
068.10 30 21102 068.20 23
070.00 2 211032 B 070.30 18
070.20 20 211051 214.40 8

A-4 FORM 6252 Fifth Edition


Appendix A
VGF F18/H24G/GSID/GL/GLD PART NUMBER INDEX

NUMBER GROUP ITEM NUMBER GROUP ITEM NUMBER GROUP ITEM

21108 022.00 22 211395 M 260.00 11 211895 X 068.20 16


022.20 5 C 211395 L 022.50 211899 L 028.01 38
022.50 21 C 211395 M 260.00 211900 068.00 32
258.00 34 211401 N 225.00 22 068.11 38
260.00 16 211411 D 070.10 068.20 15
21112 213.00 23 A 211411 C 070.10 17 266.01 56
225.10 1 A 211411 Z 070.60 23 211900 B 214.50 18
C 211136 A 070.30 30 211428 A 068.00 27 214.60 12
211203 E 027.01 24 211428 B 068.20 35 211900 B Warning 16
214.50 20 211432 068.00 26 211900 Warning 18
211203 F 027.01 28 211436 031.00 10 21191 203.00 7
211217 D 031.00 211448 B 085.00 31 203.10 2
211217 E 031.00 211463 A 263.30 18 211910 T 225.01 44
211221 031.20 13 211476 D 085.00 14 225.02 16
211221 B 033.00 20 211477 C 085.00 13 211910 W 225.00 15
211253 085.10 22 F 211477 C 085.00 6 211910 K Warning 15
211253 A 085.10 22 211537 Y 068.20 19 211910 L Warning 12
211254 J 258.00 24 211556 B 258.00 27 211910 N Warning 19
A 211254 J 258.00 211556 H 260.00 13 211910 T Warning 110
21126 266.00 2 211595 070.30 19 211910 W Warning 111
211260 225.00 33 211638 011.00 14 211911 B Warning 112
225.02 32 211653 A 068.10 211911 J Warning 113
211260 A 225.00 17 211670 004.00 13 211920 B Warning 114
225.02 30 21173 068.11 37 211920 E Warning 17
211260 B 225.02 4 070.10 8 211930 A Warning 11
211260 C 225.01 35 070.31 39 211930 C Warning 14
211291 B 214.20 20 214.00 13 21195 025.00 2
211291 C 214.30 10 263.30 14 21205 214.20 1
211291 G 214.20 21175 266.00 11 21260 022.50 28
211291 N 214.40 22 211750 070.30 22 260.00 14
A 211291 B 214.20 211753 085.10 25 21261 068.00 25
A 211291 C 214.30 211768 085.10 6 068.20 32
A 211291 G 214.20 A 211797 J 022.11 58 225.01 41
211297 020.01 41 022.41 39 266.00 15
21130 041.00 24 21181 017.10 12 21262 225.02 24
072.00 8 035.10 23 21264 022.00 29
211304 C 085.10 2 061.10 24 022.20 6
211306 A 085.10 3 068.00 21 258.00 25
211307 A 085.10 12 068.10 31 260.00 29
211332 263.00 2 070.20 21 21265 225.10 24
C 211332 263.00 070.30 12 21273 031.30 1
211355 E 263.00 070.40 24 041.00 31
211355 S 100.00 14 070.50 24 21275 031.00 19
211357 M 022.01 52 070.60 21 031.10 20
022.30 1 070.70 29 21280 263.30 15
022.51 43 070.90 19 212977 D 027.01 24
211367 068.00 6 202.00 9 21305 033.00 21
A 211367 068.10 263.00 27 21309 068.00 8
D 211367 068.00 263.10 26 068.10 26
D 211367 A 068.10 263.20 24 21310 085.00 9
E 211367 A 068.10 211853 A 041.01 21323 263.10 17
F 211367 068.10 211853 K 041.01 41 263.20 31
G 211367 068.00 211853 T 041.01 21324 263.00 19
211368 C 068.10 13 211856 085.00 32 263.10 20
211376 068.10 25 211856 A 085.00 263.20 36
085.10 5 211856 B 085.00 21340 070.20 11
211376 A 068.10 21187 203.00 12 21346 031.20 9
211377 068.11 34 203.10 17 070.20 12
211377 A 068.00 15 211879 022.10 17 101.00 19
211380 068.00 14 E 211879 022.10 214.30 3
068.20 11 211886 022.10 15 21348 047.10 1
211381 068.00 10 211887 B 021.00 8 061.10 11
068.20 6 211887 H 021.00 203.10 12
211384 D 068.20 33 21189 070.20 7 262.00 19
211395 L 022.50 17 211893 085.00 23

FORM 6252 Fifth Edition A-5


Appendix A
VGF F18/H24G/GSID/GL/GLD PART NUMBER INDEX

NUMBER GROUP ITEM NUMBER GROUP ITEM NUMBER GROUP ITEM

21350 047.10 26730 022.01 46 28644 214.10 6


070.30 022.10 39 28677 014.10 22
101.00 18 022.51 37 266.02 17
214.20 32 045.00 9 28697 014.00 5
21352 093.00 6 26736 213.00 24 262.00 26
21354 093.00 7 26743 263.10 5 266.00 28
214.40 26750 017.00 16 266.02 24
21360 214.40 16 020.01 49 28735 214.00 1
21364 203.00 2 027.02 58 28793 214.20 29
203.10 6 035.00 19 290020 045.00
21373 101.00 8 041.00 5 045.01 32
214023 022.00 18 070.40 32 258.01 37
214023 A 022.20 1 070.50 33 290021 014.10 9
214023 B 258.00 24 070.60 32 290024 067.00 12
A 214023 A 022.10 4 070.80 27 290026 028.00 23
022.20 070.90 27 214.40 6
A 214023 B 258.00 26763 068.00 31 219.00 7
C 214023 A 022.00 202.00 12 290034 028.00 34
B 214117 028.01 39 225.10 5 290039 002.11 33
214145 B 041.01 260.00 19 014.10 12
21431 017.20 4 26781 085.10 14 017.40 13
028.00 18 26786 033.00 23 027.00 5
21433 214.20 4 033.00 29 027.01 33
21536 266.00 10 041.00 29 031.00 13
21543 085.10 19 072.00 14 031.10 12
21606 041.00 19 26865 264.00 6 031.30 14
072.00 5 26874 203.00 10 045.00 29
21609 033.00 22 203.10 15 045.01 33
21627 213.00 20 26969 070.31 40 061.10 13
225.10 25 26982 047.00 1 070.00 33
21631 085.00 10 P 276090 068.10 22 070.30 6
21633 022.10 13 P 276091 266.01 51 070.40 4
21656 260.00 22 B 277 017.10 10 070.50 1
21660 085.10 9 035.10 24 070.60 17
21679 085.10 8 061.10 26 070.70 9
21766 213.00 16 068.00 7 070.70 22
WS 218182 080.01 41 068.10 27 070.80 5
21901 262.00 22 070.20 19 208.20 7
WS 241775 015.00 17 070.40 25 208.30 9
023.01 31 070.50 25 214.50 16
WS 255173 262.00 1 070.60 22 223.20 18
26012 260.00 25 070.90 21 225.02 11
26070 225.01 37 100.00 18 258.01 35
225.02 21 258.00 12 266.02 16
26096 068.00 28 263.00 20 290044 020.00 26
068.20 34 263.10 18 020.01 53
26128 047.10 7 263.20 25 045.00 21
26204 085.00 16 B 277 A 017.10 057.00 2
26258 260.00 23 28234 264.00 4 070.60 7
26322 033.00 24 28311 047.10 2 093.00 28
26348 263.00 22 070.20 4 258.00 22
26411 085.10 16 28332 070.30 33 262.00 13
26420 085.10 15 28346 047.10 290046 208.00 27
225.01 40 093.00 8 260.00 7
225.02 23 28349 047.00 2 290047 057.00 13
258.00 26 28352 070.30 204.00 3
26469 041.00 32 28357 070.70 27 219.00 1
26477 085.10 13 28419 047.00 6 225.02 27
26514 263.30 1 28433 033.00 13 290088 017.10 18
26519 213.00 26 28470 273.00 11 225.10 18
26520 067.00 5 28543 070.80 24 290089 055.00 18
26536 047.10 12 070.90 24 290145 027.02 65
26594 057.00 9 263.10 11 290146 027.01 17
26727 085.10 15 263.30 31 035.10 11
28602 047.00 7

A-6 FORM 6252 Fifth Edition


Appendix A
VGF F18/H24G/GSID/GL/GLD PART NUMBER INDEX

NUMBER GROUP ITEM NUMBER GROUP ITEM NUMBER GROUP ITEM

290164 015.00 4 290477 035.00 12 290678 023.01 33


017.20 11 290478 014.00 6 045.00 6
017.40 4 022.11 44 061.10 18
035.00 17 022.30 20 070.80 19
290179 017.40 18 022.40 3 290679 015.00 15
214.30 5 025.00 20 017.10 25
263.30 26 027.01 40 021.00 3
290180 017.40 5 035.10 22 022.30 19
219.00 5 041.00 10 027.00 12
290193 017.10 16 061.10 21 028.00 37
017.40 19 070.00 32 028.01 43
028.00 31 070.30 28 028.10 15
041.00 12 070.80 8 041.00 1
214.40 2 093.00 17 045.00 2
219.00 4 101.00 1 045.01 42
290223 219.00 15 214.50 10 047.00 12
290235 017.30 9 214.60 13 061.10 18
055.00 4 223.10 15 067.00 33
290302 002.10 18 223.20 13 070.40 9
290329 002.10 20 266.00 21 070.50 11
290380 225.00 12 290479 022.11 56 070.60 26
290393 017.00 19 022.41 37 070.70 17
017.10 24 290498 223.10 16 080.00 1
020.01 44 223.20 16 093.00 17
022.30 12 273.00 18 202.00 28
023.01 27 290541 070.70 11 208.00 18
025.00 7 093.01 36 208.10 19
027.00 8 101.00 11 208.50 18
027.01 39 204.00 5 214.60 16
035.00 15 223.10 23 263.00 15
035.10 28 223.20 9 263.10 13
042.00 18 263.20 5 263.20 32
055.00 24 273.00 4 290683 017.30 8
061.10 19 290575 070.70 7 290724 080.00 29
067.00 3 214.60 15 290772 017.30 10
070.50 14 290617 021.00 17 290802 035.00 20
070.70 30 022.00 16 035.10 1
072.00 16 022.10 28 045.01 34
080.00 20 022.30 9 061.10 22
100.10 4 022.40 23 070.00 27
208.00 022.50 14 202.01 45
208.10 5 027.02 61 208.10 5
208.20 3 028.00 17 290803 022.00 13
208.30 5 031.00 2 022.10 29
208.40 17 031.10 5 022.30 5
225.02 9 031.20 10 022.40 19
262.00 2 070.00 1 022.50 11
266.02 1 070.40 20 045.00 16
290425 023.00 22 070.50 19 064.00 15
290438 020.00 25 070.60 6 070.00 5
290452 022.00 33 070.70 14 070.10 10
022.10 12 070.80 5 070.20 22
022.40 33 070.90 5 070.30 13
025.00 12 093.01 30 080.01 45
028.01 47 100.10 8 263.00 32
028.10 12 101.00 14 263.10 31
031.20 19 213.00 5 263.20 27
033.00 15 214.50 8 290804 057.00 6
225.00 28 214.60 3 290812 055.00 5
258.00 18 225.01 48 290980 035.00 2
260.00 1 225.02 8 093.00 13
294.00 9 263.20 1 291012 017.30 13
290476 035.00 18 266.00 17
070.80 8 266.03 42
070.90 8 273.00 17

FORM 6252 Fifth Edition A-7


Appendix A
VGF F18/H24G/GSID/GL/GLD PART NUMBER INDEX

NUMBER GROUP ITEM NUMBER GROUP ITEM NUMBER GROUP ITEM

291024 022.50 7 291111 (cont.) 100.10 3 292032 (cont.) 208.00


027.01 39 101.00 2 213.00 6
093.00 2 202.00 29 225.02 15
223.10 14 202.01 46 273.00 15
225.01 49 208.00 2 292278 041.00 20
291074 028.00 5 208.10 2 072.00 4
29110 A 045.00 11 208.20 4 292451 025.00 4
291102 015.00 6 208.30 8 033.00 8
022.11 55 214.50 14 041.00 27
022.41 36 223.10 8 072.00 10
022.50 29 223.20 7 260.00 5
213.00 10 225.01 50 292453 203.10 10
266.00 22 225.02 10 292842 017.40 7
266.03 44 258.00 21 027.00 12
273.00 20 258.01 38 027.02 63
291107 017.10 17 262.00 3 042.00 21
017.40 20 263.00 16 292843 022.11 57
020.01 57 263.10 14 022.41 38
027.01 18 263.20 33 292862 045.00 20
028.00 32 266.00 20 070.70 4
053.00 3 266.02 15 292965 028.00 7
214.40 5 294.00 13 293028 202.00 21
219.00 6 291257 085.10 18 293106 072.00 13
264.10 2 291327 225.00 4 293166 080.01 33
29111 070.20 14 225.02 13 293195 045.00 7
291111 014.10 11 291387 031.00 5 293237 014.10 15
017.10 5 291484 079.00 3 020.01 54
017.20 10 291596 223.10 22 055.00 26
017.40 12 273.00 8 293242 021.00 18
020.01 35 291677 002.10 19 022.00 9
021.00 5 017.10 22 022.10 7
021.00 21 017.40 14 022.30 4
022.11 46 020.01 34 022.40 21
022.30 14 027.00 12 022.50 6
022.50 8 031.00 17 027.02 59
025.00 9 031.10 14 028.00 16
027.01 31 031.30 19 031.20 4
027.02 51 035.10 6 035.10 32
028.00 2 038.00 10 041.01 38
028.01 44 045.00 27 070.00 3
028.10 2 045.01 39 070.30 10
035.00 14 061.00 9 070.80 7
035.10 2 061.10 21 070.90 7
035.10 21 064.00 4 080.01 46
038.00 9 070.00 20 093.01 32
041.00 2 070.50 6 100.00 18
042.00 19 093.00 17 100.10 6
042.00 22 101.00 5 101.00 16
042.00 29 208.00 1 202.00 5
045.01 38 208.10 1 202.00 26
061.00 11 214.60 18 208.10 16
061.10 14 223.10 213.00 12
064.00 19 225.01 43 214.40 9
067.00 36 258.01 36 214.60 5
070.00 19 294.00 12 223.10 3
070.10 15 291756 027.00 5 223.20 3
070.30 7 291955 041.00 13 225.01 46
070.40 14 292032 022.00 11 225.02 6
070.50 5 022.10 31 225.10 26
070.60 8 022.30 10 263.00 31
070.70 8 022.50 9 263.10 30
070.80 13 041.00 34 263.20 2
070.90 13 060.00 31 266.00 12
080.00 2 202.00 24 266.02 9
093.00 3 203.00 1

A-8 FORM 6252 Fifth Edition


Appendix A
VGF F18/H24G/GSID/GL/GLD PART NUMBER INDEX

NUMBER GROUP ITEM NUMBER GROUP ITEM NUMBER GROUP ITEM

293242 (cont.) 266.03 45 294927 021.00 11 295798 266.00 14


273.00 2 060.00 12 295825 020.01 55
293248 208.20 22 080.00 25 021.00 25
208.30 11 294928 038.00 1 022.30 21
208.40 12 060.00 19 022.40 5
208.50 13 294929 055.00 7 025.00 10
293314 014.10 6 080.00 7 027.02 57
293315 014.10 7 294931 017.00 6 028.10 1
067.00 24 055.00 23 055.00 27
293333 022.10 27 294932 055.00 14 060.00 28
022.40 22 294936 027.01 32 061.00 12
293340 022.00 32 028.00 4 064.00 1
022.10 10 214.50 11 070.10 20
028.01 46 225.00 10 070.20 13
028.10 17 294937 060.00 26 070.90 5
041.00 26 294944 017.00 17 093.00 25
072.00 11 262.00 15 208.00 12
223.10 21 294946 021.00 4 208.10 10
258.00 17 028.00 25 208.20 8
260.00 3 262.00 23 208.30 21
273.00 7 294947 027.00 8 295841 C 022.50 4
294.00 10 294952 022.00 31 295841 J 022.00 5
293352 011.00 3 022.10 11 022.10 41
020.00 025.00 5 295844 A 022.00 41
293374 041.00 22 028.10 13 022.11 47
293650 021.00 7 033.00 10 022.50 34
293982 022.10 32 070.10 18 295869 264.10 3
022.30 16 223.10 20 295988 022.00 36
022.40 30 225.00 27 022.10 35
079.00 6 258.00 16 022.50 18
100.00 16 260.00 2 260.00 12
202.00 273.00 6 295988 A 022.00 37
223.10 1 294955 067.00 23 022.10 36
294019 214.40 1 208.50 1 296146 B 022.11 54
294024 017.30 6 295117 014.00 4 022.41 35
294396 225.10 13 295350 225.00 34 296165 020.01 56
294506 021.00 24 225.02 36 296375 070.80 15
028.00 36 295364 095.00 3 070.90 15
033.00 2 295367 025.00 6
064.00 5 031.20 14 3
208.20 20 033.00 12 300000 B 002.01 23
208.30 19 295368 025.00 16 300000 D 002.01 22
223.10 7 033.00 9 300006 A 004.00 2
258.00 23 295402 011.00 18 300007 E 004.00 7
294523 022.00 30 295432 028.00 11 A 300007 C 004.00
022.10 9 095.00 3 A 300007 E 004.00 6
028.01 45 295433 080.01 50 300009 002.00 4
225.00 21 208.00 25 300009 C 002.00
258.00 15 208.10 17 300009 E 002.00
294.00 4 E 295451 K 085.00 27 300017 017.20 1
294524 080.01 44 295463 031.00 5 A 300017 017.20
225.10 27 295464 031.10 1 300024 020.00 27
258.00 10 295479 219.00 10 300024 B 055.10 9
294592 294.00 5 295495 A 022.50 32 300027 023.00 21
294909 045.00 5 295495 F 022.00 34 300030 E 004.00 12
070.70 16 022.11 42 300030 G 004.00
294910 031.20 6 295496 023.00 16 300030 N 004.00
294911 079.00 5 295496 C 023.00 5 A 300030 E 004.00
294916 017.00 5 295497 E 022.10 14 A 300030 G 004.00
079.00 14 295497 F 022.10 A 300030 N 004.00
080.01 35 295537 060.00 21 300035 A 002.00 17
294918 020.00 6 295586 027.00 13 300036 J 002.00 21
294925 004.00 3 035.10 13 300036 K 002.00 20
294926 023.00 2 214.10 1 300036 M 002.00
295614 070.00 10

FORM 6252 Fifth Edition A-9


Appendix A
VGF F18/H24G/GSID/GL/GLD PART NUMBER INDEX

NUMBER GROUP ITEM NUMBER GROUP ITEM NUMBER GROUP ITEM

C 300038 023.00 1 AA 300302 D 002.00 304000 C 020.00


300048 C 002.10 4 AD 300302 C 002.00 304000 F 020.00 18
002.10 10 AE 300302 C 002.00 A 304001 011.00 16
023.00 10 CD 300302 C 002.00 304003 A 002.11
300048 D 002.10 CF 300302 C 002.00 304003 B 002.11 21
300050 023.00 20 D 300302 C 002.00 A 304003 002.11
300054 C 045.00 1 E 300302 C 002.00 A 304003 A 002.11
300054 D 045.00 F 300302 C 002.00 A 304003 B 002.11
300056 J 060.00 300304 K 004.00 1 AA 304003 A 002.11
300056 K 060.00 9 300323 023.00 23 304004 002.11 22
300061 060.00 30 300404 C 004.00 304005 002.11 23
300061 A 045.00 23 300404 K 004.00 304008 023.00 25
300063 060.00 7 300441 C 041.00 11 304009 023.00 24
300065 C 002.10 3 300605 004.00 5 304009 A 023.00
300065 D 002.10 300605 A 004.00 304009 B 023.00
A 300065 C 002.10 300605 C 004.00 304010 L 002.00 10
A 300065 D 002.10 300642 B 042.00 5 304011 002.00 19
AA 300065 D 002.10 A 300642 B 042.00 304013 002.00 14
CA 300065 C 002.10 AA 300642 B 042.00 304013 A 002.00
DA 300065 C 002.10 CA 300642 B 042.00 304014 002.00 15
300066 C 002.10 9 300705 004.00 6 304014 A 002.00
300066 D 002.10 300742 A 042.00 1 304015 002.00 18
A 300066 C 002.10 A 300742 A 042.00 304015 B 002.00
A 300066 D 002.10 AA 300742 A 042.00 304015 C 002.00
AA 300066 D 002.10 CA 300742 A 042.00 304015 F 002.00
CA 300066 C 002.10 300805 004.00 4 304016 002.00 8
DA 300066 C 002.10 300805 G 004.00 4 304020 002.01 26
300068 002.10 1 301012 B 011.00 7 304021 002.01 27
A 300068 002.10 301014 F 014.00 304021 B 002.01 27
FA 300068 002.10 301014 G 014.00 304024 A 004.00 14
GA 300068 002.10 301015 C 015.00 1 304025 A 004.00 15
HA 300068 002.10 A 301015 C 015.00 304026 020.00 10
300069 002.10 15 301016 A 080.00 28 304027 020.00 11
A 300069 002.10 301020 F 020.00 304028 020.00 17
300081 B 080.00 14 A 301020 F 020.00 304029 020.00 7
300085 A 080.00 15 AA 301020 F 020.00 304030 A 023.00 9
300108 004.00 10 301026 D 015.00 16 A 304030 A 023.00
A 300110 G 004.00 11 023.01 32 AA 304030 A 023.00
A 300110 G2 004.00 11 301041 C 041.00 DA 304030 A 023.00
300111 011.00 1 301045 B 045.00 3 304031 D 023.00 7
D 300111 011.00 301047 A 020.00 9 304032 D 023.00 6
300114 F 014.00 3 301047 B 020.00 304033 A 023.00 4
300120 G 020.00 1 301049 A 020.00 8 A 304033 A 002.11
A 300120 G 020.00 301049 B 020.00 304034 A 023.00 3
AA 300120 G 020.00 301051 C 080.00 21 304036 023.00 15
300135 A 002.00 16 301053 023.00 19 A 304036 023.00
300139 D 002.11 30 301060 C 060.00 3 304037 023.00 11
300139 F 002.11 31 A 301060 C 060.00 304038 023.00 12
300154 045.00 AC 301060 C 060.00 304039 023.00 13
300157 E 057.00 1 C 301060 C 060.00 304040 A 002.10 6
300157 F 057.00 301081 080.00 002.10 12
300180 080.00 12 301085 C 080.00 304043 002.10 17
A 300180 080.00 301095 095.00 2 304044 002.10 2
AA 300180 080.00 301095 A 095.00 1 304045 002.10 7
300190 A 020.00 30 301111 011.00 002.10 13
C 300190 A 020.00 29 E 301111 011.00 304047 A 020.00 31
300213 A 011.00 301115 C 080.00 27 304051 011.00 4
300213 C 011.00 10 301116 015.00 3 304052 B 011.00 5
A 300213 A 011.00 301145 045.00 304055 A 004.00
A 300213 C 011.00 301182 A 080.00 18 304055 B 004.00 9
A 300225 F 011.00 15 A 301182 A 080.00 304056 B 011.00 13
300245 023.01 28 301280 080.00 304057 002.11 24
300302 C 002.00 1 A 301280 080.00 304060 A 011.00 17
300302 D 002.00 AA 301280 080.00 304062 020.00 12
A 300302 D 002.00 301623 023.00 304063 020.00 21

A-10 FORM 6252 Fifth Edition


Appendix A
VGF F18/H24G/GSID/GL/GLD PART NUMBER INDEX

NUMBER GROUP ITEM NUMBER GROUP ITEM NUMBER GROUP ITEM

304067 219.00 9 304177 027.02 53 304700 E 014.10 13


304070 002.00 5 304177 A 027.02 53 020.01 47
042.00 2 304177 B 027.02 53 304700 F 020.01 45
042.00 6 C 304186 C 080.01 37 304700 J 020.01 48
304070 A 002.00 6 304193 055.00 11 100.00
304071 002.00 7 A 304193 055.00 304701 225.00 26
002.10 16 304194 055.00 12 304701 A 022.40 18
304072 057.00 5 304195 055.00 9 304701 L 070.10 13
304074 B 011.00 6 304196 055.00 22 304701 M 070.10
304074 D 055.00 19 304200 E 041.00 3 304701 R 070.20 9
304075 004.00 8 304200 G 041.00 6 304701 S 263.30 11
304077 022.51 42 304201 E 041.00 7 304701 V 070.10 12
023.00 26 304201 F 041.00 4 304701 Z 022.10 26
304078 A 080.00 26 304215 B 041.00 14 304706 A 053.00
304079 A 060.00 11 304233 015.00 19 304706 C 053.00 8
304081 021.00 12 304250 B 042.00 20 304707 B 014.10 10
304082 011.00 9 304256 047.00 5 020.01 46
304084 017.00 7 304257 047.00 3 304708 A 020.00 28
304085 017.00 9 047.00 16 304709 021.00 13
304089 060.00 18 304258 B 027.00 7 304710 D 053.00
304090 080.00 16 304258 D 027.00 7 304710 F 053.00 1
304099 023.00 047.00 14 304710 H 053.00
304103 E 080.01 40 093.00 18 304719 C 219.00 8
C 304103 B 080.01 39 304258 E 027.00 7 304721 002.01 24
304104 C 080.01 32 304303 B 060.00 6 304731 020.01 43
A 304104 C 080.01 304307 060.00 20 027.02 54
304105 B 080.01 31 304307 A 060.00 304733 045.00 26
304106 B 080.01 43 304308 060.00 22 304736 023.00 14
304106 C 080.01 48 304309 021.00 14 304738 055.00 6
304109 080.00 9 304310 021.00 6 080.00 6
304110 B 080.00 4 A 304310 021.00 304739 017.00 8
304112 A 080.00 22 304314 017.10 9 304740 055.00 15
304118 020.00 3 035.00 7 266.01 59
304118 A 020.00 2 035.10 4 304743 017.00 18
304119 020.01 42 042.00 17 304745 020.00 5
304120 B 017.00 1 061.10 17 304745 A 080.01 38
A 304120 B 017.00 304316 079.00 2 304745 C 020.00 4
304122 017.00 3 304317 021.00 2 304745 H 263.30 6
304123 017.00 11 262.00 6 304745 J 027.01 21
060.00 5 304318 064.00 2 304745 L 002.11 32
304124 017.00 4 304322 A 079.00 12 304745 P 002.11 25
304126 055.00 1 304323 079.00 8 304752 060.00 13
304130 055.00 3 304324 C 042.00 25 304753 064.00 11
A 304130 055.00 304325 021.00 10 304754 060.00 25
304131 055.00 2 304328 C 080.00 13 304755 060.00 29
304133 055.00 13 080.00 17 061.00 15
304135 A 080.00 10 304329 A 064.00 10 304755 A 041.00 8
A 304135 A 080.00 304335 C 042.00 8 304760 017.00 15
304136 055.00 8 304339 064.00 8 017.20 8
080.00 8 304341 064.00 9 055.00 25
304137 055.00 10 304342 C 021.00 1 304765 225.00 2
C 304137 055.00 A 304342 D 021.00 26 225.02 39
304146 225.00 1 304391 002.01 25 304773 023.00 17
225.02 38 304397 060.00 10 038.00 11
304148 A 047.10 13 304436 060.00 23 045.01 37
304148 B 047.10 14 304437 060.00 24 070.70 21
304149 101.00 17 304597 080.01 42 304779 055.00 21
304150 C 027.01 36 304617 B 079.00 7 304792 023.01 29
304150 D 014.00 1 304618 D 079.00 4 304794 B 219.00 11
014.10 1 304619 E 079.00 1 304795 B 219.00 13
304156 G 027.01 36 304638 067.00 21 304798 B 045.00 8
304156 L 263.20 6 304639 080.00 11 304798 K 045.01 31
A 304156 G 027.01 36 080.00 19 045.01 41
304169 A 015.00 18 C 304679 A 061.10 16 304798 L 028.00 8
304169 H 093.00 24 304700 D 100.00 19

FORM 6252 Fifth Edition A-11


Appendix A
VGF F18/H24G/GSID/GL/GLD PART NUMBER INDEX

NUMBER GROUP ITEM NUMBER GROUP ITEM NUMBER GROUP ITEM

304798 S 022.01 44 305023 B 067.00 17 305120 031.00 18


022.11 48 A 305023 B 067.00 031.10 13
022.50 35 A 305024 E 067.00 4 031.30 15
304798 U 028.00 9 305025 E 067.00 2 294.00 15
304813 060.00 27 305026 A 067.00 7 305122 A 208.00 7
304818 020.00 13 305026 B 067.00 18 305122 B 208.00 7
304819 020.00 14 305026 C 067.00 10 305122 C 208.10 4
304820 020.00 15 305028 C 067.00 11 305123 A 027.00
304821 020.00 16 305029 C 067.00 15 305123 B 027.00 6
304822 060.00 2 305032 A 067.00 20 305124 F 208.00 16
304823 B 011.00 8 305035 B 067.00 14 305124 G 208.10 20
304825 D 011.00 2 305036 B 045.01 30 A 305126 B 208.00 15
A 304825 D 011.00 067.00 34 A 305126 G 208.00
304830 023.00 305044 B 038.00 7 A 305126 M 208.10 23
A 304830 023.00 C 305044 B 038.00 A 305126 T 208.30 3
304831 015.00 8 305045 028.00 28 305127 E 035.10 19
304832 015.00 5 305047 A 028.00 13 305127 F 035.10 17
304832 B 015.00 13 305050 038.00 3 305127 G 035.10
304833 A 080.00 24 305051 028.00 12 305127 H 035.10
304834 A 060.00 14 305054 042.00 10 A 305127 B 017.10 23
304835 B 067.00 22 305055 B 028.00 26 A 305127 C 017.10
304835 C 060.00 15 305055 C 028.00 27 A 305127 D 035.10 30
304868 A 011.00 19 305056 028.00 33 A 305127 R 061.10 29
304868 D 011.00 305058 C 022.01 53 A 305127 S 061.10 30
304870 C 064.00 3 022.30 2 305130 A 035.10 29
304874 045.01 36 022.51 44 305131 A 061.00 13
304882 020.01 33 305059 045.01 40 305132 015.00 7
304888 011.00 20 305067 A 020.01 50 AA 305132 015.00
304889 B 011.00 294.00 18 305133 A 015.00 9
304893 017.00 13 305082 038.00 2 305135 015.00 10
304894 225.00 16 305083 038.00 6 305136 A 015.00 11
304894 A 225.02 1 D 305083 038.00 305138 208.00 23
304895 B 225.01 42 305084 C 038.00 5 208.10 15
304895 C 213.00 13 305086 A 015.00 2 305141 C 038.00 12
225.10 28 305088 D 035.10 9 045.01 35
304895 E 225.02 25 214.00 2 305141 D 022.01 47
304896 D 225.01 45 214.20 30 022.11 49
304896 E 225.02 14 305088 E 214.10 7 022.51 38
304897 017.00 12 305090 214.00 10 045.00 10
304897 A 055.00 16 305101 A 033.00 11 305141 E 045.00 24
304898 017.00 2 305102 B 033.00 6 A 305144 C 202.00 11
305002 E 002.11 26 305106 B 263.30 22 305145 028.10 6
305002 F 002.11 29 305106 F 263.00 18 305146 D 202.00 1
305003 J 002.00 12 263.10 16 305146 E 202.00 2
305003 K 002.00 263.20 35 305148 A 202.00 6
305015 C 041.00 15 305106 H 263.30 21 305150 D 027.01 38
A 305015 C 041.00 305107 B 263.00 3 305150 G 027.02 64
305016 A 072.00 15 305109 263.00 28 305151 B 027.02 48
305016 B 072.00 263.10 29 305151 C 027.01 37
305016 D 072.00 263.20 28 305156 020.01 36
305016 E 072.00 305109 B 263.00 28 027.02 44
305016 F 072.00 263.10 29 068.00 35
A 305016 D 072.00 305112 033.00 25 068.20 3
A 305016 E 072.00 C 305112 033.00 070.80 22
A 305016 H 072.00 305113 A 033.00 3 070.90 22
C 305016 A 072.00 305113 B 033.00 5 305156 B 067.00 31
C 305016 B 072.00 A 305113 A 033.00 305157 015.00 20
305017 A 041.00 18 A 305113 B 033.00 305169 025.00 11
305017 C 072.00 305114 033.00 031.20 18
305017 D 072.00 6 C 305114 033.00 033.00 14
305017 E 072.00 305116 033.00 19 305169 B 025.00 15
305018 A 041.00 21 305116 D 025.00 18 031.20 22
305018 C 072.00 7 305116 X 031.20 23 033.00 18
305018 G 072.00 305116 Z 031.20 15 305175 C 031.00 6
305022 C 067.00 1 A 305119 028.00 6 305176 B 042.00 14

A-12 FORM 6252 Fifth Edition


Appendix A
VGF F18/H24G/GSID/GL/GLD PART NUMBER INDEX

NUMBER GROUP ITEM NUMBER GROUP ITEM NUMBER GROUP ITEM

305178 025.00 3 305353 E 061.10 34 305445 B 093.00 9


305180 025.00 14 305367 028.00 10 305445 F 093.00 16
031.20 21 305368 A 035.10 305445 H 214.50 3
033.00 17 214.00 214.60 2
305181 L 070.31 43 305368 B 214.10 2 305445 J 214.50 5
305181 R 070.00 17 305371 C 070.40 26 305445 K 017.20 2
305181 S 070.00 070.50 28 305445 P 214.50 6
305181 T 070.00 22 070.60 24 305445 R 070.90 20
305181 U 067.00 28 305373 213.00 21 A 305446 061.10 6
305181 V 031.00 7 225.10 2 A 305446 A 061.10
305181 W 031.00 7 305374 213.00 19 305448 N 061.10 12
305181 Z 031.10 11 305375 E 225.00 30 305448 R 093.00 10
305182 G 266.00 7 305375 F 225.00 29 C 305448 T 035.10 5
305182 J 266.00 23 305375 H 225.10 8 305452 A 061.10 23
305182 L 266.00 18 305375 J 225.10 9 305461 027.01 24
A 305182 N 266.02 2 305375 K 225.10 23 305464 035.00 4
305183 X 266.00 35 305375 W 225.10 15 305464 C 035.00 4
305183 Y 266.01 50 305375 X 225.10 16 A 305464 C 035.00
305183 Z 266.01 A 305376 E 020.00 22 D 305464 035.00
305187 022.01 51 305387 264.10 1 E 305464 035.00
022.11 51 305397 B 258.00 20 305466 A 214.20 28
305196 017.30 5 305407 027.00 15 305470 035.00 16
305197 A 067.00 25 035.10 10 305471 E 035.00 8
305197 B 020.00 23 305408 A 027.00 11 305472 035.00 1
027.02 43 305409 A 035.00 3 305474 202.01 36
055.00 17 305410 027.01 22 305475 B 002.00 11
055.00 20 305410 C 027.01 35 305476 035.00 5
068.00 36 214.50 19 305477 093.00 23
068.20 4 214.60 9 305478 A 027.01 38
305197 C 017.00 10 305410 D 027.01 30 305478 B 070.31
047.00 10 214.50 9 305478 G 262.00 10
047.10 8 305410 K 027.01 35 A 305478 A 027.01 38
060.00 4 305410 U 027.01 22 305480 002.00 3
067.00 32 305410 V 027.01 22 305481 042.00 16
085.00 15 305411 214.30 1 305484 002.10 5
C 305203 035.10 3 305412 A 027.00 14 002.10 11
A 305204 B 017.40 305414 A 027.00 10 305485 023.00 8
A 305204 C 017.40 1 305414 B 027.00 305486 U 202.01 44
F 305204 017.20 9 305419 027.01 23 305486 X 093.00 24
G 305204 017.20 12 214.50 21 305487 C 022.50 1
K 305204 A 017.40 3 305419 A 027.01 19 305490 A 031.20 3
305215 A 067.00 16 305419 B 027.01 19 305499 214.40 15
305232 M 070.80 2 305420 263.30 5 305525 N 022.00 2
305232 N 070.80 18 A 305420 F 017.20 7 022.10 2
A 305232 M 070.80 2 305422 A 035.00 6 305530 B 263.30 34
A 305232 N 070.80 18 305423 035.10 14 305530 C 263.00 9
A 305232 Y 070.90 18 305426 045.00 4 305530 G 100.10 11
AA 305232 Z 070.90 18 305428 070.10 14 305530 H 100.00 6
A 305274 A 017.30 14 305430 B 020.00 29 305530 J 100.00 7
A 305274 D 017.30 14 A 305434 G 202.00 10 305530 K 100.00 15
AD 305274 A 017.30 305435 B 031.00 4 305530 R 100.00 8
AD 305274 D 017.30 305436 033.00 16 305530 S 100.00
AE 305274 A 017.30 305436 E 025.00 13 305530 T 100.00 9
305283 C 070.20 2 305436 F 031.20 20 C 305533 027.00 14
305283 S 070.60 3 A 305436 033.00 D 305533 027.00 14
305283 Y 070.30 5 A 305436 E 025.00 305537 C 214.20 27
305283 Z 070.30 A 305436 F 031.20 214.40 14
A 305283 B 070.20 16 305440 203.10 7 305539 219.00 12
A 305283 J 070.30 1 305443 017.10 20 305543 214.40 11
A 305283 X 070.50 3 035.10 26 305556 027.01 19
305289 F 060.00 8 305443 A 017.10 26 A 305570 017.20 3
305297 223.10 24 305443 F 017.10 13 305573 219.00 14
305298 266.00 26 305443 G 035.10 25 A 305576 208.40 7
305301 A 093.00 15 305443 K 070.70 35 A 305576 A 208.20 23
305304 H 100.10 11 305445 061.10 15 305577 028.10 14

FORM 6252 Fifth Edition A-13


Appendix A
VGF F18/H24G/GSID/GL/GLD PART NUMBER INDEX

NUMBER GROUP ITEM NUMBER GROUP ITEM NUMBER GROUP ITEM

305585 023.00 18 A 305669 B 070.40 305805 022.01 50


305602 035.00 10 070.50 022.11 52
035.00 A 305671 070.00 9 022.51 41
305607 A 017.10 27 305678 B 202.00 20 305805 A 022.01
305607 F 017.10 2 A 305679 208.00 10 022.11
A 305607 017.10 28 305687 223.20 15 022.51
A 305607 B 017.10 8 305688 C 223.10 4 305807 A 208.20 6
305612 A 017.00 14 223.20 4 208.30 6
305612 B 017.00 305688 D 273.00 16 305808 A 208.20 12
305613 A 047.00 9 C 305689 223.10 208.30 10
305616 047.00 4 223.20 305809 208.20 21
305621 002.11 27 D 305689 223.10 6 208.30 20
305625 080.00 5 305690 022.40 29 208.40 15
305626 213.00 7 G 305692 273.00 19 208.50 16
A 305627 213.00 1 305693 C 273.00 10 305810 093.00 22
M 305627 260.00 8 305693 F 273.00 22 305810 A 093.00
A 305628 A 022.30 17 A 305693 D 273.00 13 305810 C 093.00
C 305628 022.30 A 305693 E 273.00 21 305812 A 093.00 19
D 305628 A 022.50 3 A 305694 223.10 18 305813 A 093.00 14
G 305628 A 022.00 4 273.00 1 305814 208.20 19
H 305628 022.50 305695 A 223.10 19 208.30 18
H 305628 A 022.00 273.00 5 305819 C 093.00 11
305629 022.00 15 305695 B 223.10 17 305827 C 101.00 10
022.30 7 305695 G 223.20 14 305827 D 101.00 9
022.50 13 A 305695 F 273.00 9 C 305827 A 101.00 20
305631 A 219.00 3 305696 002.00 9 305830 035.10 7
305632 070.10 9 305700 D 080.01 30 305833 B 258.00 2
305632 A 070.20 18 305700 E 080.00 3 305833 C 258.00
305632 B 070.30 9 305700 F 080.01 34 C 305833 C 258.00
305633 B 020.01 51 305704 015.00 14 D 305833 B 258.00
305633 C 294.00 17 305712 D 260.00 4 E 305833 B 258.00
305634 060.00 1 305713 H 225.00 11 305834 A 258.00
305634 B 020.00 19 305713 P 021.00 15 305834 B 258.00 1
305634 C 047.10 9 305713 S 093.00 4 305840 027.00
305639 070.00 15 305713 U 093.00 305844 022.20 2
305639 A 070.40 12 305718 A 002.10 8 305845 B 014.00 2
305639 B 070.50 15 002.10 14 014.10 2
305640 070.00 4 305720 A 022.30 22 305845 C 014.00
305642 070.10 11 022.40 2 014.10
305643 C 047.00 11 028.10 4 305846 070.10 19
305644 045.00 19 305724 042.00 26 070.20 15
305646 D 070.30 36 305725 042.00 27 070.40 1
A 305648 045.00 12 305728 002.10 19 070.50 2
A 305648 C 031.30 23 305751 060.00 17 070.80 20
305654 070.00 14 305752 060.00 16 208.00 14
070.60 5 305760 C 042.00 9 208.10 22
070.70 13 A 305764 L 093.00 12 208.30 23
305655 070.00 12 C 305764 G 093.00 305847 028.00 11
070.40 35 305776 B 017.30 4 A 305849 273.00 14
070.50 36 305776 B 017.30 4 305851 A 070.40 33
070.60 35 305782 A 263.10 9 070.50 34
305661 A 045.00 15 305782 L 100.10 13 070.60 33
305664 B 223.00 1 305790 A 017.40 11 070.80 17
A 305664 E 223.10 11 305791 A 017.40 10 070.90 17
A 305664 G 223.10 305793 C 042.00 23 305855 072.00 1
A 305664 J 223.20 10 305793 D 042.00 23 305856 035.10
305666 A 053.00 5 305794 C 042.00 24 214.00 9
305668 053.00 12 305801 A 017.40 9 305857 031.20 12
305669 070.00 6 305802 B 208.00 30 305858 031.20 1
305669 D 070.40 30 C 305803 A 208.20 15 305864 B 027.00
070.50 31 208.40 10 305866 027.00
070.60 30 C 305803 C 208.30 14 305866 A 027.00
A 305669 A 070.40 13 C 305803 E 208.50 11 305867 031.00 11
070.50 26 305804 A 042.00 11 305867 A 031.10 8
305867 D 093.00

A-14 FORM 6252 Fifth Edition


Appendix A
VGF F18/H24G/GSID/GL/GLD PART NUMBER INDEX

NUMBER GROUP ITEM NUMBER GROUP ITEM NUMBER GROUP ITEM

305867 E 070.40 21 305955 A 070.80 4 307082 100.10 1


070.50 18 070.90 4 A 307087 014.10 4
070.60 16 305966 A 027.00 307089 266.03 30
305867 F 070.60 13 305971 100.10 15 307089 A 266.02 5
305867 J 070.40 11 305996 027.00 1 307089 B 266.03 30
070.50 13 305996 B 027.00 307089 C 266.02 5
305867 K 031.30 22 306000 L 214.60 17 307092 266.03 31
305867 M 093.00 4 306001 027.01 29 307093 014.10 14
305867 V 225.02 2 214.60 8 307094 014.10 19
305867 W 225.02 3 306001 B 027.01 29 307095 014.10 20
305867 X 225.02 19 214.50 17 P 311770 262.00 16
305867 Y 225.02 20 306002 A 214.60 7 P 311771 262.00 14
305868 M 031.30 6 306003 E 214.60 6 P 311772 262.00 5
305868 N 031.30 21 306005 214.60 1 P 315740 263.30 23
305868 W 070.00 306006 208.50 6 340740 266.03 36
305868 X 070.00 23 306006 A 208.40 5 350374 208.10 6
305869 214.50 2 A 306009 N 070.70 24 350407 223.00 3
305869 A 214.50 1 A 306009 P 070.70 350421 022.40 31
A 305872 S 208.50 8 A 306010 E 070.70 18 350425 053.00 7
A 305872 T 208.50 8 A 306010 J 070.70 6 350428 027.02 49
305876 208.40 18 AA 306010 K 070.70 2 070.40 15
208.50 19 306013 070.60 9 214.50 15
305882 002.00 13 306014 070.70 25 350438 031.20 16
305884 041.01 39 306015 C 027.02 66 350440 031.20 2
305884 Warning 115 306015 L 070.70 34 061.00 16
305885 035.00 11 306015 M 070.70 223.20
305885 Warning 13 306015 N 070.70 32 350441 214.40 7
305886 041.00 33 306016 070.70 15 223.10
305890 020.00 20 306017 C 070.70 31 350442 022.00 38
027.02 43 306018 C 070.70 33 022.10 30
070.90 30 306019 C 070.70 36 028.10 18
305895 025.00 19 306020 027.01 34 031.20 24
A 305921 A 022.00 40 306020 A 027.01 350450 002.11 34
022.10 34 214.50 12 017.10 7
305922 031.30 20 A 306020 C 214.60 14 022.11 45
305923 031.30 12 306021 208.50 3 022.30 15
305924 031.30 4 306024 002.00 2 022.40 4
305926 263.00 25 306024 A 002.00 023.01 30
263.10 24 306026 047.10 16 025.00 8
305926 A 263.10 306027 070.70 20 027.00 9
305934 042.00 306027 A 070.70 5 027.02 50
305935 042.00 12 306032 208.40 14 028.00 24
305942 A 070.40 2 208.50 15 028.10 5
305942 B 070.40 6 306033 208.40 16 031.00 15
305942 C 070.10 5 208.50 17 031.10 16
A 305942 070.50 8 306040 017.40 15 031.30 17
305943 045.00 25 306043 079.00 13 033.00 1
305944 A 022.00 1 306043 A 079.00 035.00 13
022.10 1 306045 C 017.40 2 035.10 20
305945 294.00 16 306047 022.50 30 041.00 9
305946 080.01 49 306047 A 022.50 31 042.00 28
305948 A 002.01 26 306059 047.10 15 045.00 22
305949 070.80 9 306068 020.00 24 045.00 28
305949 B 070.90 9 306091 017.40 17 047.00 13
305953 070.80 11 306091 A 017.40 16 061.00 10
070.90 11 306095 002.10 061.10 20
305954 070.80 2 306135 002.10 064.00 18
305954 A 070.80 18 306135 A 002.10 070.00 30
305954 B 070.80 21 306160 B 027.00 070.10 16
305954 G 070.80 18 306161 A 027.00 070.30 8
A 305954 070.80 2 A 307002 014.10 5 070.40 3
A 305954 B 070.80 21 307030 014.10 16 070.50 4
A 305954 K 070.90 2 307070 014.10 17 070.60 25
305955 070.80 4 307076 070.90 29 070.80 12
070.90 4 307076 A 070.90 29

FORM 6252 Fifth Edition A-15


Appendix A
VGF F18/H24G/GSID/GL/GLD PART NUMBER INDEX

NUMBER GROUP ITEM NUMBER GROUP ITEM NUMBER GROUP ITEM

350450 (cont.) 070.90 12 41236 K 064.00 6 489119 061.00 8


093.00 26 070.00 8 489294 214.40 23
093.01 34 070.40 28 489300 055.10
100.10 2 070.50 29 489302 055.10 3
101.00 3 070.60 28 489303 055.10 4
202.00 30 41236 M 208.50 7 489304 055.10 2
202.01 47 41236 C 070.80 1 489305 055.10 1
208.00 3 070.90 1 489325 055.10
208.10 3 41236 R 070.80 1 489331 055.10 5
208.20 5 070.90 1 489332 055.10 6
208.30 7 41879 A 047.00 15 489333 055.10 7
214.50 13 418813 D 022.50 27 489334 055.10 8
223.10 9 B 420 057.00 3 489431 214.10 17
223.20 8 OB 421 A 057.00 4 489435 214.10 19
225.00 9 44566 053.00 9 489437 214.10 12
225.01 51 448039 022.40 16 489438 214.10 9
225.10 12 448167 085.00 6 489439 214.10 14
258.01 39 44893 A 225.00 7 489440 214.10 13
266.00 19 225.01 52 489442 214.10 10
266.02 14 44893 C 028.00 1 489443 214.10 18
350460 053.00 10 44999 N 067.00 19 489444 214.10 16
350486 080.00 23 44999 S 263.00 4 489445 214.10 11
350890 B 070.40 23 48406 101.00 21 489446 214.10 15
070.50 16 258.01 42 489604 070.80 28
070.60 14 48406 B 258.00 19 070.90 28
350890 C 021.00 20 48406 D 101.00 13 489605 070.80 28
350890 D 020.01 38 48406 M 208.50 20 070.90 28
266.01 58 48406 R 266.00 9 48988 H 263.30 27
266.03 35 48406 X 101.00 4 493637 214.20 8
350924 028.00 35 48797 G 068.10 24 214.30 6
350956 A 067.00 26 263.00 11 214.40 18
35793 T 266.03 33 263.10 23 493643 214.30 19
B 363 027.00 16 48797 H 068.10 8 214.40 32
035.10 12 48797 L 068.10 12 493646 214.30 22
053.00 4 48797 T 068.00 39 493668 214.00 5
B 367 011.00 12 068.10 15 493669 214.00 4
39110 214.00 8 068.20 37 493670 214.00
WS 394595 022.01 48 070.31 493690 214.00 6
022.11 50 262.00 25 493691 214.00 7
027.00 3 266.00 29 493719 214.20 7
B 3979 057.00 10 266.02 25 493720 214.20 9
489020 214.20 16 214.20 19
4 214.30 14 214.30 9
408477 258.00 14 214.40 27 214.30 21
408677 266.00 43 489021 214.20 11 214.40 21
41236 208.00 9 489030 214.20 23 214.40 34
41236 A 079.00 11 214.30 12 493721 214.20 10
41236 B 214.00 15 214.40 25 214.30 20
214.10 5 489031 214.20 17 214.40 33
41236 C 017.10 3 214.30 13 493722 214.20 6
035.10 15 214.40 26 493723 214.20 12
061.10 4 489032 214.20 18 214.30 18
070.10 2 214.30 11 214.40 31
070.20 3 214.40 24 493724 214.20 13
070.30 2 489035 214.20 15 214.30 17
070.40 7 214.30 15 214.40 30
070.50 9 214.40 28 496177 061.00 7
070.60 1 489045 214.30 8 496690 061.00 2
070.70 1 214.40 20 496858 061.00 6
41236 D 070.00 489046 214.20 22 496877 061.00 4
41236 E 208.10 7 214.30 7 496880 061.00 3
208.40 6 214.40 19 496881 061.00 5
489077 214.20 21 496884 061.10 7
489084 027.00 496888 061.00 17
489085 027.00 496895 061.10 9

A-16 FORM 6252 Fifth Edition


Appendix A
VGF F18/H24G/GSID/GL/GLD PART NUMBER INDEX

NUMBER GROUP ITEM NUMBER GROUP ITEM NUMBER GROUP ITEM

496896 061.10 8 A 69694 G 022.11 740017 085.00 1


496897 061.10 022.41 740018 A 085.10 11
499222 214.20 14 69695 213.00 4 740021 085.00 12
214.30 16 260.00 27 740034 294.00
214.40 29 69711 G 022.30 A 740106 D 085.00 2
499702 263.00 69711 M 022.30 23 A 740107 A 085.00 11
263.10 022.40 1 740110 B 294.00 2
499714 214.40 69711 N 022.40 740111 B 085.00 24
263.20 69743 D 022.40 27 740111 C 085.00 24
499931 263.30 A 69743 D 022.40 740112 258.00 8
69746 068.20 14 A 740112 085.00 5
5 69757 U 225.01 39 085.00 7
B 557 A 041.01 40 225.02 17 740206 028.10 8
58003 C 214.00 69785 260.00 20 740206 A 028.10
58003 D 214.00 69787 A 022.50 2 740207 A 085.00 30
A 58003 C 214.00 3 69811 B 022.50 26 740207 B 085.00 21
C 58003 D 214.00 258.00 28 740207 C 085.00 30
B 5827 263.30 30 69811 K 022.00 27 A 740222 D 085.00 18
B 5871 202.01 49 022.20 8 A 740222 J 294.00 7
59021 B 214.20 69815 022.00 24 A 740222 K 294.00
59021 F 214.20 022.20 13 A 740224 294.00
59021 G 214.20 69816 258.00 33 C 740224 294.00 8
59022 214.30 69817 022.00 26 D 740224 294.00
59025 C 214.40 022.20 10 E 740224 294.00
59028 214.10 8 258.00 32 740226 085.00 3
59032 D 214.50 4 69818 022.50 22 740241 085.00 28
69819 022.50 24 740243 A 085.00 26
6 A 69828 213.00 14 740244 A 085.00 22
60869 A 213.00 18 A 69831 022.20 3 740272 A 028.01 40
60883 C 204.00 4 69919 022.01 55 740300 A 085.10 10
60905 202.00 17 022.11 59 A 740303 085.10 10
60999 D 022.01 022.30 24 C 740400 085.00 25
60999 S 022.01 022.41 40 D 740400 085.00 25
022.11 022.51 46 D 740414 085.00 19
022.30 69919 D 022.11 59 740416 294.00 6
022.41 022.30 740500 085.10 7
022.51 47 022.41 740500 A 085.10 7
60999 Z 022.01 022.51 A 740500 A 085.00 33
022.11 59 69921 022.00 25 085.10
022.30 022.20 11 C 740500 085.00 33
022.41 022.50 23 085.10
022.51 258.00 31 740501 085.10 4
B 6280 020.01 39 69950 022.00 23 740600 028.10 16
068.00 34 022.20 12 740600 A 028.10
068.20 2 69951 022.00 19 740604 A 028.10
63602 263.10 1 022.20 14 740607 A 028.10 7
63809 B 266.01 44 740608 A 022.00 3
63809 E 022.00 10 7 022.10 3
022.10 8 701696 011.00 11 74176 263.30 19
258.01 43 7044 070.80 3 76400 017.30 7
63809 U 223.00 2 070.90 3 035.00 9
63809 Y 223.10 B 7106 B 031.30 8 266.00 37
65098 D 027.02 47 73413 A 020.01 40 266.03 32
65098 Y 027.02 47 73654 L 068.10 28 76883 C 263.00 34
65110 Y 263.30 29 068.20 22 263.20 37
65423 Z 068.00 2 73654 M 022.10 16 263.30 20
69677 B 028.00 29 740003 028.10 3 76883 D 263.30 10
69677 C 028.00 29 740009 085.10 17 76911 208.20 18
69694 022.00 14 740011 022.01 54 208.30 17
022.30 6 022.30 3 208.40 13
022.50 12 022.51 45 208.50 14
69694 G 022.11 53 A 740012 D 085.00 17 214.60 19
022.41 34 A 740015 B 085.00
C 740015 A 085.00

FORM 6252 Fifth Edition A-17


Appendix A
VGF F18/H24G/GSID/GL/GLD PART NUMBER INDEX

NUMBER GROUP ITEM NUMBER GROUP ITEM NUMBER GROUP ITEM

78002 021.00 23 78282 A 020.01 52 WS 808402 266.01 46


033.00 7 093.00 21 WS 808406 080.01 47
064.00 16 214.20 25 WS 808423 028.00 25
223.10 263.00 5 208.40 1
78002 A 223.10 263.20 10 208.50 2
223.20 19 263.30 7 223.00 4
78202 A 208.00 6 78282 C 017.00 20 223.20 17
78202 Q 061.10 32 020.01 37 WS 809173 015.00 12
78204 D 068.00 1 027.01 27 022.40 26
068.10 1 100.00 3 041.01 36
78204 E 266.00 31 78282 D 214.00 11 070.40 16
266.02 4 214.10 3 070.50 23
78204 F 263.10 2 263.00 12 202.00
78204 G 061.10 1 263.20 17 266.02 19
070.30 32 78282 E 017.30 15 WS 809174 031.00 16
263.20 14 027.01 26 031.10 17
78207 S 225.01 36 042.00 15 031.30 18
78208 A 031.30 10 047.00 8 070.00 29
100.00 4 064.00 13 070.60 20
78208 B 027.01 42 208.20 11 85761 D 263.20 11
070.80 23 208.30 4 85761 H 263.20 15
070.90 23 208.40 2 85793 T 266.00 38
263.00 13 262.00 9 B 8677 031.30 9
263.10 12 78282 F 014.00 7 202.01 38
263.20 18 027.01 26
263.30 32 064.00 14 9
78208 C 067.00 30 068.00 41 B 9059 208.20 17
266.02 12 068.20 40 208.30 16
78208 E 068.00 40 225.00 31 B 9129 061.00 1
068.10 4 78282 G 014.10 18 061.10 28
068.20 39 042.00 4 B 9266 203.10 4
78208 J 262.00 27 78282 J 068.10 9 B 9266 F 203.00 4
266.00 30 78283 A 022.10 20 B 9269 B 203.00 3
266.03 26 78927 M 214.10 4 203.10 5
78209 D 027.02 46 7915 A 263.00 23 951049 B 022.00 35
78209 E 070.00 25 213.00 3
78209 F 068.00 33 8 951049 G 260.00 10
068.20 1 801140 068.11 32 951360 258.00 3
78209 G 068.10 14 B 8025 203.10 8 954841 068.00 22
78209 W 225.10 21 80297 B 262.00 11 068.20 31
78210 A 202.01 37 80297 C 258.01 44 266.00 3
78210 B 020.01 32 266.00 8 954842 266.00 1
78210 R 263.00 33 WS 805066 067.00 13 954847 E 266.00 5
263.10 32 WS 808292 027.02 60 954864 A 022.10 22
263.20 23 070.60 11 022.40 15
78211 L 100.10 14 223.10 10 068.00 12
78212 A 070.80 25 273.00 23 068.20 8
070.90 25 WS 808297 022.00 7 955204 A 202.01 35
78212 C 021.00 19 022.01 45 955204 G 260.00 18
78212 D 100.00 12 022.10 5 955204 M 202.00 23
78212 F 068.20 18 022.50 36 202.01 41
78212 G 070.31 42 100.10 9 955204 P 213.00 22
78212 J 266.00 36 WS 808318 017.10 6 225.10 6
78212 K 070.31 47 022.51 39 955998 M 260.00 17
263.00 24 WS 808394 021.00 27 955998 U 202.00 18
263.10 22 035.10 31 956469 E 068.00 30
263.20 20 061.10 35 957068 F 068.00 29
78212 T 266.02 13 202.00 4 957389 L 213.00 17
78212 V 266.00 39 266.03 37 B 9641 067.00 8
266.03 34 WS 808397 223.10 13
78212 W 017.20 6 223.20 1
78228 F 225.02 33 WS 808398 223.10
266.03 43
WS 808400 064.00 12

A-18 FORM 6252 Fifth Edition


APPENDIX B

ENGINE PRESERVATION PRODUCTS


THE FOLLOWING ENGINE PRESERVATION PRODUCTS ARE AVAILABLE FROM YOUR WAUKESHA DISTRIBUTOR.

ENGINE PAINT
Maintain your Waukesha engines original appearance with Engine Paint from Waukesha, designed to provide long-lasting adherence, color
retention, durability and weather resistance.

161361 Oil Field Orange 13 Oz. Spray Can

161362 Gray 13 Oz. Spray Can

494008 Gray 1 Gallon Container

494010 Oil Field Orange 1 Gallon Container

ENGINE PRESERVATIVE OIL


Waukesha Engine Preservative Oil has proved to be highly effective and provides a practical and economical solution to storage requirements.
For additional information on the use of this product, refer to your engines Operation And Service Manual.

166709A 1 Gallon Container

FORM 6252 Fifth Edition B-1


APPENDIX B

NOTES

B-2 FORM 6252 Fifth Edition


WAUKESHA ENGINE, DRESSER, INC. EXPRESS LIMITED WARRANTY COVERING
PRODUCTS USED IN CONTINUOUS DUTY APPLICATIONS
INTRODUCTION
CONTINUOUS DUTY DEFINITION: The highest load and speed which can be applied, subject to Waukeshas approved ratings in effect at time of sale.

APPLICATIONS COVERED BY THIS WARRANTY


Waukesha Engine warrants that it will repair or replace, AT ITS ELECTION AND EXPENSE, any part of an engine, or Enginator, or product (hereinafter
referred to as Products) manufactured by Waukesha, which proves to have had a defect in material or workmanship.

I. TERMS OF EXPRESS LIMITED WARRANTY


Waukesha Engine warrants that it will repair or replace, AT ITS ELECTION AND EXPENSE, any part of an engine, or engine powered Enginator (herein-
after referred to as Products) manufactured by Waukesha, which proves to have had a defect in material or workmanship.

II. TERM LIMITATIONS OF EXPRESS LIMITED WARRANTY


A.
This coverage shall commence upon initial new Products start-up date and shall expire upon the earlier of the following:
1. 12 months after the initial new Products start-up date; or
2. 24 months after the original shipment date of the covered Products by Waukesha Engine.
B. Notwithstanding the foregoing, Waukesha further warrants that the cylinder block casting, cylinder head castings, connecting rod forgings, and crankshaft
forging will be free from defects in material or workmanship. This additional warranty only covers failures of the specific items noted within this subpara-
graph.
This coverage shall expire upon the earlier of the following:
1. 60 months after the initial new Products start-up date; or
2. 25,000 hours of operation of the covered Products; or
3. 72 months after the original shipment date of the covered Products by Waukesha Engine.
NOTE: No damage from other sources, such as damage from the loss of a crankshaft bearing, shall be considered as a forging defect.

III. WAUKESHAS RESPONSIBILITIES UNDER THE EXPRESS LIMITED WARRANTY


Waukesha shall be responsible for:
A. The repair or replacement, at Waukeshas election, of covered defective parts and all reasonable labor required regarding a warranted failure during the
express limited warranty term. All such labor shall be provided by Waukeshas authorized contractor or distributor.
B. Reasonable and necessary travel and expenses incurred by Waukeshas authorized contractor or distributor.
C. Replacement of lubricating oil, coolant, filter elements, or other normal maintenance items that are contaminated and/or damaged as a direct result of a
warranted failure.
NOTWITHSTANDING THE FOREGOING, WAUKESHA SHALL NOT BE RESPONSIBLE FOR LABOR COSTS ASSOCIATED WITH WARRANTY CLAIMS
BROUGHT PURSUANT TO SUB-PARAGRAPH II (B).

IV. OWNERS RESPONSIBILITIES UNDER THE EXPRESS LIMITED WARRANTY


Owner shall be responsible for:
A. The operation and maintenance of the Products within the guidelines established by Waukesha.
B. Making the Products available to Waukesha or Waukeshas authorized contractors or distributors for any warranty repair, during normal business hours.
C. All additional costs incurred for premium or overtime labor, should owner request that repairs be made on a premium or overtime schedule.
D. All costs incurred as the result of removal or reinstallation of the Products as may be required to effect any warranted repair.
E. All administrative costs and expenses resulting from a warranted failure.
F. Any costs of transportation, towing, repair facilities, or associated costs.
G. All labor, travel, mileage, and other related costs and expenses associated with a claim made pursuant to subparagraph II (B) above.
H. Loss of revenue and loss of/or damage to real and/or personal property.

V. LIMITATION OF WAUKESHAS OBLIGATIONS


The obligations of Waukesha under this express limited warranty shall be waived and voided, and Waukesha shall not, thereafter, be responsible for:
A. Any failure resulting from owner or operator abuse or neglect, including but not by way of limitation, any operation, installation, application, or maintenance
practice not in accordance with guidelines or specifications established by Waukesha; or
B. Any failure resulting from unauthorized modifications or repairs of the Products; or
C. Any failure resulting from overload, overspeed, overheat, accident, improper storage; or
D. Failure of owner to promptly provide notice of a claimed defect; or
E. Failure of Products for which Waukesha did not receive properly completed start-up reports; or
F. Repairs of a covered failure performed with non-genuine Waukesha parts; or
G. Repairs of a covered failure performed by non-authorized contractors or distributors; or
H. Failure to make Products available to Waukesha or its authorized representatives; or
I. Failure to supply documents such as drawings and specifications relating to the specific application of the Products.

VI. APPLICABILITY AND EXPIRATION


The warranties set out above are extended to all owners in the original chain of distribution. The warranties and obligations of Waukesha shall expire and be of
no further effect upon the dates of expiration of the applicable warranty periods.
THE FOREGOING SETS FORTH WAUKESHAS ONLY OBLIGATIONS AND OWNERS EXCLUSIVE REMEDY FOR BREACH OF WARRANTY, WHETHER
SUCH CLAIMS ARE BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY), OR OTHER THEORIES, AND THE
FOREGOING IS EXPRESSLY IN LIEU OF OTHER WARRANTIES WHATSOEVER EXPRESSED, IMPLIED, AND STATUTORY, INCLUDING WITHOUT LIMITA-
TION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Notwithstanding the preceding, in no event shall Waukesha be liable for any direct, special, incidental, or consequential damages (whether denominated
in contract, tort strict liability, negligence, or other theories) arising out of this Agreement or the use of any Products provided under this Agreement.
Any action arising hereunder or relating hereto, whether based on breach of contract, tort (including negligence and strict liability), or other theories
must be commenced within two (2) years after the cause of action accrues or it shall be barred.

BINDING ARBITRATION
(a) Buyer and Seller shall attempt, in good faith, to resolve any dispute arising out of or relating to this agreement, or the products and/or services pro-
vided hereunder, promptly by negotiation between executives. If the matter has not been resolved within sixty (60) days of a partys request for
negotiation, either party may initiate arbitration as herein after provided.
(b) Any dispute arising out of or related to this agreement or the products and/or services provided hereunder which has not been resolved by the
negotiation procedure described above, shall be settled by binding arbitration administered by the American Arbitration Association in accordance
with its Commercial Arbitration Rules and judgment on the award rendered by the arbitrator(s) may be entered in any court having jurisdiction
thereof.
(c) Unless Buyer and Seller otherwise agree in writing, the arbitration panel shall consist of three arbitrators. The arbitrator(s) shall have no authority to
award punitive or other damages not measured by the prevailing partys actual damages and may not, in any event, make any ruling, finding or
award that does not conform to the terms and condition of this agreement. The law of Texas shall govern.
(d) The arbitration proceeding shall be conducted in English, in Dallas, Texas.
See Form M-464 for the most current warranty terms. Effective April 10, 2001.

W-1
WAUKESHA ENGINE, DRESSER, INC. EXPRESS LIMITED WARRANTY
FOR PRODUCTS OPERATED IN EXCESS OF CONTINUOUS DUTY RATINGS
INTRODUCTION
This warranty only applies to engines which Waukesha Engine has approved to operate in excess of the continuous duty rating.
APPLICATIONS COVERED IN THIS WARRANTY
Standby Service Applications: This rating applies to those systems used as a secondary or backup source of electrical power. This rating is the output the system
will produce continuously (no overload), 24 hours per day for the duration of the prime power source outage.
Intermittent Service Applications: This rating is the highest load and speed that can be applied in variable speed mechanical system applications only (i.e., blow-
ers, pumps, compressors, etc.). Operation at this rating is limited to a maximum of 3500 hours/year. For continuous operation for any length of time between the con-
tinuous and intermittent ratings, see the Peak Shaving Application rating procedure.
Peak Shaving Applications: The rating for a peak shaving application is based on the number of horsepower-hours available per year at site specific conditions. All
applications using a peak shaving rating require a signed Special Application Approval (SAA) from Waukeshas Application Engineering Department.
I. TERMS OF EXPRESS LIMITED WARRANTY
Waukesha Engine warrants that it will repair or replace, AT ITS ELECTION AND EXPENSE, any part of an engine, or engine powered Enginator (hereinafter
referred to as Products) manufactured by Waukesha, which proves to have had a defect in material or workmanship.
II. TERM LIMITATIONS OF EXPRESS LIMITED WARRANTY
A.
This coverage shall commence upon initial new Products start-up date and shall expire upon the earlier of the following:
1. 60 months or 3500 hours, whichever occurs first, after the initial new Products start-up date; or
2. 72 months after the original shipment date of the covered Service Parts by Waukesha Engine.
B. Notwithstanding the foregoing, Waukesha further warrants that the cylinder block casting, cylinder head castings, connecting rod forgings, and crankshaft
forging will be free from defects in material or workmanship. This additional warranty only covers failure of the specific items noted within this subparagraph.
This coverage shall expire upon the earlier of the following:
1. 60 months after the initial new Products start-up date; or
2. 25,000 hours of operation of the covered Products; or
3. 72 months after the original shipment date of the covered Products by Waukesha Engine.
NOTE: No damage from other sources, such as damage from the loss of a crankshaft bearing, shall be considered as a forging defect.
III. WAUKESHAS RESPONSIBILITIES UNDER THE EXPRESS LIMITED WARRANTY
Waukesha shall be responsible for:
A. The repair or replacement, at Waukesha's election, of covered defective parts and all reasonable labor required regarding a warranted failure during the
express limited warranty term. All such labor shall be provided by Waukesha's authorized contractor or distributor.
B. Reasonable and necessary travel and expenses incurred by Waukesha's authorized contractors or distributor.
C. Replacement of lubricating oil, coolant, filter elements, or other normal maintenance items that are contaminated and/or damaged as a direct result of a
warranted failure.
NOTWITHSTANDING THE FOREGOING, WAUKESHA SHALL NOT BE RESPONSIBLE FOR LABOR COSTS ASSOCIATED WITH WARRANTY CLAIMS
BROUGHT PURSUANT TO SUB-PARAGRAPH II (B).
IV. OWNERS RESPONSIBILITIES UNDER THE EXPRESS LIMITED WARRANTY
Owner shall be responsible for:
A. The operation of the product within the allowable HP-HR/YR rating granted by the specific Special Application Approval for the product.
B. The operation and maintenance of the Products within the guidelines established by Waukesha.
C. Making the Products available to Waukesha or Waukesha's authorized contractors or distributors for any warranty repair, during normal business hours.
D. All additional costs incurred for premium or overtime labor, should owner request that repairs be made on a premium or overtime schedule.
E. All costs incurred as the result of removal or reinstallation of the Products as may be required to effect any warranted repair.
F. All administrative costs and expenses resulting from a warranted failure.
G. Any costs of transportation, towing, repair facilities, or associated costs.
H. All labor, travel, mileage, and other related costs and expenses associated with a claim made pursuant to subparagraph II (B) above.
I. Loss of revenue and loss of/or damage to real and/or personal property.
V. LIMITATION OF WAUKESHAS OBLIGATIONS
The obligations of Waukesha under this express limited warranty shall be waived and voided, and Waukesha shall not, thereafter, be responsible for:
A. Any failure resulting from owner or operator abuse or neglect, including but not by way of limitation, any operation, installation, application, or maintenance
practice not in accordance with guidelines or specifications established by Waukesha; or
B. Any failure resulting from unauthorized modifications or repairs of the Products: or
C. Any failure resulting from overload, overspeed, overheat, accident, improper storage; or
D. Failure of owner to promptly provide notice of a claimed defect; or
E. Failure of Products for which Waukesha did not receive properly completed start-up reports; or
F. Repairs of a covered failure performed with non-genuine Waukesha parts; or
G. Repairs of a covered failure performed by non-authorized contractors or distributors; or
H. Failure to make Products available to Waukesha or its authorized representatives; or
I. Failure to supply documents such as drawings and specifications relating to the specific application of the Products.
VI. APPLICABILITY AND EXPIRATION
The warranties set out above are extended to all owners in the original chain of distribution. The warranties and obligations of Waukesha shall expire and be of
no further effect upon the dates of expiration of the applicable warranty periods.
The foregoing sets forth Waukeshas only obligations and owners exclusive remedy for breach of warranty, whether such claims are based on breach of
contract, tort (including negligence and strict liability), or other theories, and the foregoing is expressly in lieu of other warranties whatsoever
expressed, implied, and statutory, including without limitation, the IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
Notwithstanding the preceding, in no event shall Waukesha be liable for any direct, special, incidental, or consequential damages (whether denominated
in contract, tort strict liability, negligence, or other theories) arising out of this Agreement or the use of any Products
provided under this Agreement.
Any action arising hereunder or relating hereto, whether based on breach of contract, tort (including negligence and strict liability), or other theories
must be commenced within two (2) years after the cause of action accrues or it shall be barred.
BINDING ARBITRATION
(a) Buyer and Seller shall attempt, in good faith, to resolve any dispute arising out of or relating to this agreement, or the products and/or services pro-
vided hereunder, promptly by negotiation between executives. If the matter has not been resolved within sixty (60) days of a partys request for
negotiation, either party may initiate arbitration as herein after provided.
(b) Any dispute arising out of or related to this agreement or the products and/or services provided hereunder which has not been resolved by the
negotiation procedure described above, shall be settled by binding arbitration administered by the American Arbitration Association in accordance
with its Commercial Arbitration Rules and judgment on the award rendered by the arbitrator(s) may be entered in any court having jurisdiction
thereof.
(c) Unless Buyer and Seller otherwise agree in writing, the arbitration panel shall consist of three arbitrators. The arbitrator(s) shall have no authority to
award punitive or other damages not measured by the prevailing partys actual damages and may not, in any event, make any ruling, finding or
award that does not conform to the terms and condition of this agreement. The law of Texas shall govern.
(d) The arbitration proceeding shall be conducted in English, in Dallas, Texas.
See Form M-467 for the most current warranty terms. Effective April 10, 2001.

W-2
WAUKESHA ENGINE, DRESSER, INC. EXPRESS LIMITED WARRANTY COVERING GENUINE WAUKESHA
SERVICE PARTS AND FACTORY REMANUFACTURED SERVICE PARTS USED IN A CERTIFIED OVERHAUL
INTRODUCTION
This warranty only applies to Genuine Waukesha Service Parts and Waukesha Factory Remanufactured Service Parts (to include assemblies and short blocks)
(hereinafter referred to as Service Parts) sold by Waukesha Engine and used for a certified overhaul of Waukesha Product.
I. TERMS OF EXPRESS LIMITED WARRANTY
A. Waukesha Engine warrants that it will repair or replace, AT ITS ELECTION AND EXPENSE, any Genuine Waukesha Service Part installed on an engine,
or Enginator, or product (hereinafter referred to as Products) manufactured by Waukesha, which proves to have had a defect in material or workmanship.
B. Waukesha Engine further warrants that it will repair or replace AT ITS ELECTION AND EXPENSE, any component of the Waukesha product damaged as
the direct result of a warrantable defect in a Genuine Waukesha Service Part during the term of coverage.
II. TERM LIMITATIONS OF EXPRESS LIMITED WARRANTY
A. This coverage shall commence upon the initial start-up date of the overhauled Product and shall expire upon the earlier of the following:
1. 12 months after the overhauled Product start-up date; or
2. 24 months after the purchase date.
B. Notwithstanding the foregoing, Waukesha further warrants that the intake valves, exhaust valves, intake valve seats, exhaust valve seats, intake valve
guides, exhaust valve guides, piston rings, cylinder liners, pistons, main bearings, and connecting rod bearings used in the certified overhaul will be free
from defects in material or workmanship. This additional warranty term only covers failures of the specific items noted within this sub-paragraph.
This coverage shall expire the earlier of the following:
1. 18 months after the overhauled Product start-up date; or
2. 24 months after the purchase date.
III. WAUKESHAS RESPONSIBILITIES UNDER THE EXPRESS LIMITED WARRANTY
Waukesha shall be responsible for:
A. The repair or replacement, at Waukesha's election, of covered defective Service Parts and progressive damage as explained in Paragraph 1B of this warranty.
B. Labor time to repair or replace the defective part as established by the Waukesha Labor Guide Manual. All reimbursable labor costs shall be provided by
Waukesha's authorized distributor.
C. The reimbursement of documented Distributor expenses covering Freight, Customs, Brokers Fees, and Import Duties to obtain the replacement Service
Part from Waukesha.
D. Reimbursable travel time and mileage coverage shall expire the earlier of 6 months after the overhauled Product start-up date or 24 months after the pur-
chase date.
IV. OWNERS RESPONSIBILITIES UNDER THE EXPRESS LIMITED WARRANTY
Owner shall be responsible for:
A. The operation and maintenance of the Products/Service Parts within the guidelines established by Waukesha.
B. Making the Products/Service Parts available to Waukesha or Waukesha's authorized distributors for any warranty repair, during normal business hours.
C. All additional costs incurred for premium or overtime labor, should owner request that repairs be made on a premium or overtime schedule.
D. All costs incurred as the result of removal or reinstallation of the Products as may be required to effect any warranted repair.
E. All administrative costs and expenses resulting from a warranted failure.
F. Any costs of transportation, towing, repair facilities, or associated costs.
G. All additional labor time in excess of Waukesha's Labor Guide for the warrantable repair.
H. Loss of revenue and loss of/or damage to real and/or personal property.
V. LIMITATION OF WAUKESHAS OBLIGATIONS
The obligations of Waukesha under this express limited warranty shall be waived and voided, and Waukesha shall not, thereafter, be responsible for:
A. Any failure resulting from owner or operator abuse or neglect, including but not by way of limitation, any operation, installation, application, maintenance, or
assembly practice not in accordance with guidelines or specifications established by Waukesha; or
B. Any failure resulting from unauthorized modifications or repairs of the Products or Service Parts; or
C. Any failure resulting from overload, overspeed, overheat, accident; or
D. Failure of owner to promptly provide notice of a claimed defect; or
E. Failure of Service Parts for which Waukesha did not receive proper documentation concerning the certified overhaul delivery and the start up date of the
Product from an Authorized Waukesha Engine Distributor; or
F. Repairs of a covered failure performed with non-genuine Waukesha parts; or
G. Repairs of a covered failure performed by non-authorized contractors or distributors; or
H. Failure to make Products and Service Parts available to Waukesha or its authorized representatives; or
I. Failure to supply documents such as drawings and specifications relating to the specific application of the Products; or
J. Any failure of Service Parts resulting from misapplication or improper repair procedures; or
K. Any failure or damage resulting from the improper or extended storage of a Service Part; or
L. Freight, Customs, Brokers Fees, and Import Duties if appropriate documentation is not provided.
M. Normal wear items or consumable parts such as belts, spark plugs, lubricating oil filters, air filters, etc. These items are not considered defective if in need
of routine replacement, rebuild or maintenance during the term of the warranty.
VI. APPLICABILITY AND EXPIRATION
The warranty set out above is extended to the original purchaser of the Genuine Waukesha Service Parts. The warranty and obligations of Waukesha shall
expire and be of no further effect upon the dates of expiration of the applicable warranty periods.
VII. WARRANTY ADMINISTRATION
This warranty is administered exclusively by an Authorized Waukesha Distributor. The certified overhaul invoice and/or start-up report must be provided to the
Distributor to determine whether the warranty is applicable.
Contact the nearest Authorized Waukesha Distributor for assistance with warranty matters or questions. The location of the nearest Authorized Distributor is
available by contacting Waukesha Engine at (262) 547-3311.
THE FOREGOING SETS FORTH WAUKESHAS ONLY OBLIGATIONS AND OWNERS EXCLUSIVE REMEDY FOR BREACH OF WARRANTY, WHETHER
SUCH CLAIMS ARE BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY), OR OTHER THEORIES, AND THE
FOREGOING IS EXPRESSLY IN LIEU OF OTHER WARRANTIES WHATSOEVER EXPRESSED, IMPLIED, AND STATUTORY, INCLUDING WITHOUT LIMITA-
TION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Notwithstanding the preceding, in no event shall Waukesha be liable for any direct, special, incidental, or consequential damages (whether denominated
in contract, tort strict liability, negligence, or other theories) arising out of this agreement or the use of any Products provided under this Agreement.
Any action arising hereunder or relating hereto, whether based on breach of contract, tort (including negligence and strict liability), or other theories
must be commenced within two (2) years after the cause of action accrues or it shall be barred.
BINDING ARBITRATION
(a) Buyer and Seller shall attempt, in good faith, to resolve any dispute arising out of or relating to this agreement, or the Products and/or services pro-
vided hereunder, promptly by negotiation between executives. If the matter has not been resolved within sixty (60) days of a partys request for
negotiation, either party may initiate arbitration as herein after provided.
(b) Any dispute arising out of or related to this agreement or the Products and/or services provided hereunder which has not been resolved by the
negotiation procedure described above, shall be settled by binding arbitration administered by the American Arbitration Association in accordance
with its Commercial Arbitration Rules and judgment on the award rendered by the arbitrator(s) may be entered in any court having jurisdiction
thereof.
(c) Unless Buyer and Seller otherwise agree in writing, the arbitration panel shall consist of three arbitrators. The arbitrator(s) shall have no authority to
award punitive or other damages not measured by the prevailing partys actual damages and may not, in any event, make any ruling, finding or
award that does not conform to the terms and condition of this agreement. The law of Texas shall govern.
(d) The arbitration proceeding shall be conducted in English, in Dallas, Texas.
See Form M-3245 for the most current warranty terms. Effective June 25, 2003.

W-3
WAUKESHA ENGINE, DRESSER, INC. EXPRESS LIMITED WARRANTY COVERING
GENUINE WAUKESHA SERVICE PARTS AND FACTORY REMANUFACTURED SERVICE PARTS
INTRODUCTION
This warranty only applies to Genuine Waukesha Service Parts and Waukesha Factory Remanufactured Service Parts (to include assemblies and short blocks)
(hereinafter referred to as Service Parts) sold by Waukesha Engine and used for repair, maintenance, or overhaul of Waukesha Products.
I. TERMS OF EXPRESS LIMITED WARRANTY
A. Waukesha Engine warrants that it will repair or replace, AT ITS ELECTION AND EXPENSE, any Genuine Waukesha Service Part installed on an engine,
or Enginator, or product (hereinafter referred to as Products) manufactured by Waukesha, which proves to have had a defect in material or workmanship.
B. Waukesha Engine further warrants that it will repair or replace, AT ITS ELECTION AND EXPENSE, any component of the Waukesha Product damaged as
the direct result of a warrantable defect in a Genuine Waukesha Service Part during the term of coverage.
II. TERM LIMITATIONS OF EXPRESS LIMITED WARRANTY
This coverage shall commence upon the date the Service Part is installed and shall expire upon the earlier of the following:
A. 12 months after the date the part is installed; or
B. 24 months after the purchase date from an authorized Waukesha Distributor.
III. WAUKESHAS RESPONSIBILITIES UNDER THE EXPRESS LIMITED WARRANTY
Waukesha shall be responsible for:
A. The repair or replacement, at Waukeshas election, of covered defective Service Parts and progressive damage as explained in Paragraph 1B of this warranty.
B. Labor time to repair or replace the defective part as established by the Waukesha Labor Guide Manual. All reimbursable labor costs shall be provided by
Waukeshas authorized Distributor.
C. The reimbursement of documented Distributor expenses covering Freight, Customs, Brokers Fees, and Import Duties to obtain the replacement Service
Part from Waukesha.
IV. OWNERS RESPONSIBILITIES UNDER THE EXPRESS LIMITED WARRANTY
Owner shall be responsible for:
A. The operation and maintenance of the Products/Service Parts within the guidelines established by Waukesha.
B. Making the Products/Service Parts available to Waukesha or Waukeshas authorized Distributors for any warranty repair, during normal business hours.
C. All additional costs incurred for premium or overtime labor, should owner request that repairs be made on a premium or overtime schedule.
D. All costs incurred as the result of removal or reinstallation of the Products as may be required to effect any warranted repairs.
E. All administrative costs and expenses resulting from a warranted failure.
F. Any costs of transportation, towing, repair facilities, or associated costs.
G. All travel, mileage, and other related Distributor costs and expenses associated with repair under the terms of this Service Parts Warranty.
H. All additional labor time in excess of Waukeshas Labor Guide for the warrantable repair.
I. Loss of revenue and loss of/or damage to real and/or personal property.
V. LIMITATION OF WAUKESHAS OBLIGATIONS
The obligations of Waukesha under this express limited warranty shall be waived and voided, and Waukesha shall not, thereafter, be responsible for:
A. Any failure resulting from owner or operator abuse or neglect, including but not by way of limitation, any operation, installation, application, maintenance, or
assembly practice not in accordance with guidelines or specifications established by Waukesha; or
B. Any failure resulting from unauthorized modifications or repairs of the Products or Service Parts; or
C. Any failure resulting from overload, overspeed, overheat, accident; or
D. Failure of owner to promptly provide notice of a claimed defect; or
E. Failure of Service Parts for which Waukesha did not receive proper documentation concerning the Service Parts purchase date from an authorized
Waukesha Engine Distributor; or
F. Repairs of a covered failure performed with non-genuine Waukesha parts; or
G. Repairs of a covered failure performed by non-authorized Contractors or Distributors; or
H. Failure to make Products and Service Parts available to Waukesha or its authorized representative; or
I. Failure to supply documents such as drawings and specifications relating to the specific application of the Products; or
J. Any failure of Service Parts resulting from misapplication or improper repair procedures; or
K. Any failure or damage resulting from the improper or extended storage of a Service Part; or
L. Freight, Customs, Broker Fees, and Import Duties if appropriate documentation is not provided; or
M. Normal wear items or consumable parts such as belts, spark plugs, lubricating oil filters, air filters, etc. are not considered defective if in need of routine
replacement, rebuild, or maintenance during the term of the warranty.
VI. APPLICABILITY AND EXPIRATION
The warranty set out above is extended to the original purchaser of the Genuine Waukesha Service Parts. The warranty and obligations of Waukesha shall
expire and be of no further effect upon the date of expiration of the applicable warranty period.
VII. WARRANTY ADMINISTRATION
This warranty is administered exclusively by an authorized Waukesha Distributor. The invoice for the failed Service Parts must be provided to the Distributor to
determine whether the warranty is applicable.
Contact the nearest authorized Waukesha Distributor for assistance with warranty matters or questions. The location of the nearest authorized Distributor is
available by contacting Waukesha Engine at (262) 547-3311.
THE FOREGOING SETS FORTH WAUKESHAS ONLY OBLIGATIONS AND OWNERS EXCLUSIVE REMEDY FOR BREACH OF WARRANTY, WHETHER
SUCH CLAIMS ARE BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY), OR OTHER THEORIES, AND THE
FOREGOING IS EXPRESSLY IN LIEU OF OTHER WARRANTIES WHATSOEVER EXPRESSED, IMPLIED, AND STATUTORY, INCLUDING WITHOUT LIMITA-
TION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Notwithstanding the preceding, in no event shall Waukesha be liable for any direct, special, incidental, or consequential damages (whether denominated
in contract, tort strict liability, negligence, or other theories) arising out of this Agreement or the use of any Products provided under this Agreement.
Any action arising hereunder or relating hereto, whether based on breach of contract, tort (including negligence and strict liability), or other theories
must be commenced within two (2) years after the cause of action accrues or it shall be barred.
BINDING ARBITRATION
(a) Buyer and Seller shall attempt, in good faith, to resolve any dispute arising out of or relating to this agreement, or the products and/or services pro-
vided hereunder, promptly by negotiation between executives. If the matter has not been resolved within sixty (60) days of a partys request for
negotiation, either party may initiate arbitration as herein after provided.
(b) Any dispute arising out of or related to this agreement or the products and/or services provided hereunder which has not been resolved by the
negotiation procedure described above, shall be settled by binding arbitration administered by the American Arbitration Association in accordance
with its Commercial Arbitration Rules and judgment on the award rendered by the arbitrator(s) may be entered in any court having jurisdiction
thereof.
(c) Unless Buyer and Seller otherwise agree in writing, the arbitration panel shall consist of three arbitrators. The arbitrator(s) shall have no authority to
award punitive or other damages not measured by the prevailing partys actual damages and may not, in any event, make any ruling, finding or
award that does not conform to the terms and condition of this agreement. The law of Texas shall govern.
(d) The arbitration proceeding shall be conducted in English, in Dallas, Texas.
See Form M-463 for the most current warranty terms. Effective June 25, 2003.

W-4
WAUKESHA ENGINE, DRESSER, INC.
EXPRESS LIMITED WARRANTY FOR CUSTOM ENGINE CONTROLS
INTRODUCTION
The Custom Engine Control (CEC) are sold as standard, or as options on new Engines or as Genuine Service Parts, and includes the Detonation Sensing Module
(DSM), Air Fuel Module (AFM), Turbocharger Control Module (TCM), and Ignition Module (IM), or any other control device identified as a CEC product.
I. TERMS OF EXPRESS LIMITED WARRANTY
Waukesha Engine warrants that it will repair or replace, AT ITS ELECTION AND EXPENSE, any CEC installed on an engine, or Enginator[, or product (herein-
after referred to as Products) manufactured by Waukesha, or purchased as a Genuine Service Part, which proves to have had a defect in material or workman-
ship.
II. TERM LIMITATIONS OF EXPRESS LIMITED WARRANTY
A. This coverage shall commence upon initial new Products start-up date or the purchase date, in the case of service parts sales, and shall expire upon the
earlier of the following:
1. New Products
a) 12 months after the initial new Product start-up date; or
b) 24 months after the original shipment date of the covered Products by Waukesha Engine.
2. Genuine Service Parts
a) 12 months from the date the CEC is put into service; or
b) 18 months from the purchase date.
B. Notwithstanding the foregoing, Waukesha further warrants that it will repair or replace, AT ITS ELECTION AND EXPENSE, any component of the
Waukesha Product damaged as the direct result of a warrantable defect in a CEC product.
III. WAUKESHAS RESPONSIBILITIES UNDER THE EXPRESS LIMITED WARRANTY
Waukesha shall be responsible for:
A. The repair or replacement, at Waukeshas election, of covered defective parts and all reasonable labor required regarding a warranted failure during the
express limited warranty term. All such labor shall be provided by Waukeshas authorized contractor or distributor.
B. For the repair of CECs installed on Products shipped from Waukesha, reasonable and necessary travel and expenses incurred by Waukeshas authorized
contractor or distributor.
C. Replacement of lubricating oil, coolant, filter elements, Waukesha supplied engine components, or other normal maintenance items that are contaminated
and/or damaged as a direct result of a warranted failure.
IV. OWNERS RESPONSIBILITIES UNDER THE EXPRESS LIMITED WARRANTY
Owner shall be responsible for:
A. The operation and maintenance of the Products within the guidelines established by Waukesha.
B. Making the Products available to Waukesha or Waukeshas authorized contractors or distributors for any warranty repair, during normal business hours.
C. All additional costs incurred for premium or overtime labor, should owner request that repairs be made on a premium or overtime schedule.
D. All costs incurred as the result of removal or reinstallation of the Products as may be required to effect any warranted repair.
E. All administrative costs and expenses resulting from a warranted failure.
F. Any costs of transportation, towing, repair facilities, or associated costs.
G. All travel, mileage, and other related Distributor costs and expenses associated with repair under the terms of the Service Parts Warranty.
H. All additional labor time in excess of Waukeshas Labor Guide for the warrantable repair.
I. Loss of revenue and loss of/or damage to real and/or personal property.
V. LIMITATION OF WAUKESHAS OBLIGATIONS
The obligations of Waukesha under this express limited warranty shall be waived and voided, and Waukesha shall not, thereafter, be responsible for:
A. Any failure resulting from owner or operator abuse or neglect, including but not by way of limitation, any operation, installation, application, or maintenance
practice not in accordance with guidelines or specifications established by Waukesha; or
B. Any failure resulting from unauthorized modifications or repairs of the Products; or
C. Any failure resulting from overload, overspeed, overheat, accident, improper storage; or
D. Failure of owner to promptly provide notice of a claimed defect; or
E. Failure of Products for which Waukesha did not receive properly completed start-up reports; or
F. Repairs of a covered failure performed with non-genuine Waukesha parts; or
G. Repairs of a covered failure performed by non-authorized contractors or distributors; or
H. Failure to make Products available to Waukesha or its authorized representatives; or
I. Failure to supply documents such as drawings and specifications relating to the specific application of the Products; or
J. Improper diagnosis of a Product problem for which a CEC product is replaced.
K. Failure of Service Parts for which Waukesha did not receive proper documentation concerning the Service Parts purchase date from an authorized
Waukesha Engine Distributor; or
L. Any failure of a Service Part resulting from misapplication or improper repair procedures; or
M. Any failure or damage resulting from the improper or extended storage of a Service Part; or
N. Freight, Customs, Broker Fees, and Import Duties if appropriate documentation is not provided.
VI. APPLICABILITY AND EXPIRATION
The warranties set out above are extended to all owners in the original chain of distribution. The warranties and obligations of Waukesha shall expire and be of
no further effect upon the dates of expiration of the applicable warranty periods.
VII. WARRANTY ADMINISTRATION
This warranty is administered exclusively by an authorized Waukesha Distributor. The invoice for the failed Service Parts must be provided to the Distributor to
determine whether the warranty is applicable.
Contact the nearest authorized Waukesha Distributor for assistance with warranty matters or questions. The location of the nearest authorized Distributor is
available by contacting Waukesha Engine at (414) 547-3311.
THE FOREGOING SETS FORTH WAUKESHAS ONLY OBLIGATIONS AND OWNERS EXCLUSIVE REMEDY FOR BREACH OF WARRANTY, WHETHER
SUCH CLAIMS ARE BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY), OR OTHER THEORIES, AND THE
FOREGOING IS EXPRESSLY IN LIEU OF OTHER WARRANTIES WHATSOEVER EXPRESSED, IMPLIED, AND STATUTORY, INCLUDING WITHOUT LIMITA-
TION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Notwithstanding the preceding, in no event shall Waukesha be liable for any direct, special, incidental, or consequential damages (whether denominated
in contract, tort strict liability, negligence, or other theories) arising out of this Agreement or the use of any Products provided under this Agreement.
Any action arising hereunder or relating hereto, whether based on breach of contract, tort (including negligence and strict liability), or other theories
must be commenced within two (2) years after the cause of action accrues or it shall be barred.
BINDING ARBITRATION
(a) Buyer and Seller shall attempt, in good faith, to resolve any dispute arising out of or relating to this agreement, or the products and/or services pro-
vided hereunder, promptly by negotiation between executives. If the matter has not been resolved within sixty (60 days of a partys request for nego-
tiation, either party may initiate arbitration as herein after provided.
(b) Any dispute arising out of or related to this agreement or the products and/or services provided hereunder which has not been resolved by the
negotiation procedure described above, shall be settled by binding arbitration administered by the American Arbitration Association in accordance
with its Commercial Arbitration Rules and judgment on the award rendered by the arbitrator(s) may be entered in any court having jurisdiction
thereof.
(c) Unless Buyer and Seller otherwise agree in writing, the arbitration panel shall consist of three arbitrators. The arbitrator(s) shall have no authority to
award punitive or other damages not measured by the prevailing partys actual damages and may not, in any event, make any ruling, finding or
award that does not conform to the terms and condition of this agreement. The law of Texas shall govern.
(d) The arbitration proceeding shall be conducted in English, in Dallas, Texas.
See Form M-462 for the most current warranty terms. Effective April 10, 2001.

W-5

You might also like