You are on page 1of 4

2.

16 (2016-02-02)
improvements:
- fixed DIN midi remote control problem introduced in 2.15

2.15 (2015-11-06)
improvements:
- channel group assignments synced when fader link option is reselected
- eq gain center led only lights up when gain is exactly 0 dB
- hard mute state shown on meter pages (dark red fader knob)
- eq band reset bug fixed
- screen draw routines significantly accelerated
- ducker attack and release times fixed (were swapped since 2.10)

2.14 (2015-07-16)
improvements:
- X-USB and DN32-USB were reporting wrong sample rate after changing sample rate
without reboot

2.13 (2015-07-06)
improvements:
- fixed an issue where iQ speaker settings were not recalled correctly when
linked
- iQ setup now also accessible via layer buttons
- fixed an issue where inserts were not activated when usb was very busy during
startup
- correct preamp indication on DL152..DL155, output SRC disabled on DL155
- fixed an issue where midi messages were duplicated when assigned to more than
one assignable
button/encoder simultaneously

2.12 (2015-06-01)
improvements:
- HUI level meters and LCD fixed
- DHCP menu on X32CORE fixed
- fixed rare issue where aes50 slave mode won't sync
- iQ speaker settings moved to /outputs/p16 path
new features:
- iQ speaker link function

2.11 (2015-04-09)
improvements:
- load show file in X32CORE fixed (snippet offset)
- fader motor issues on M32/M32R (minimum position) fixed
- exclude hidden and system files from usb file list
- correct indication of 0 dB fader position
- scene GO and UNDO leds fixed
- DHCP can be selected on X32CORE
- bus AFL solo correctly uses pan when bus is routed to LR
new features:
- support for M32C, S32, DL32, DL231

2.10 (2014-11-20)
improvements:
- screen flicker when switching between pages with overlay graphics removed
- improved clock stability in Dante slave mode
new features:
- rta detector selection (rms/peak), peak hold, and adjustable decay time
- gate section: expander with adjustable range
- compressor section: compressor/expander with auto mode
2.09 (2014-10-23)
improvements:
- fixed issue where usb drives were not recognized when connected during power-on
- setup/global and setup/config screens rearranged
- sample rate can now be changed without reboot
- issue with mute menu on scenes/home screen fixed
- some redraw issues related to mute menu fixed
new features:
- safe shutdown (incl. usb recorder shutdown), console reboot, firmware update,
factory reset added to setup
- selectable 12h (am/pm) and 24h clock mode
- new options: hard mute groups, dcas as mute groups, invert mute leds (for
broadcast use)
- DHCP

2.08 (2014-09-12)
improvements:
- Xedit bug fixed when changing fx type
- xlr out routing added to routing snippet
- p16 and aes/ebu routing added to out patch snippet
- jitter when syncing to adat/word clock/madi reduced
- sporadic noise when switching between special combinations of fx types removed
- sporadic click at end of usb playback removed
- sporadic reboot when using too complex osc subscriptions (old X32-mix on iPad
1) fixed
- sporadic loss of meter information (osc clients) fixed; osc server version 2.05
new features:
- support for DN32-MADI, DN32-DANTE, DN32-ADAT
- support for DL15X and DL25X stage box series
- iQ control via stage box P16 port (requires fw >= 2.0 on S16/DL16)

2.07 (2014-06-26)
improvements:
new features:
- support for DL16
- M32 support

2.06 (2014-06-16)
improvements:
- cue delete fixed
- dante card playback gain fixed
- 'use rta source' for geq fixed

2.05 (2014-05-27)
improvements:
- fixed incorrect power-on channel mute state when assigned to mute groups
- fixed issues with right fader bank when in geq on faders or remote mode
- fixed dyn key meter on M/C channel
- osc server updates to support fast sync mode w/ X32Edit
- tap function improved
new features:

2.04 (2014-04-23)
improvements:
- minor graphics and parameter name fixes
new features:

2.03 (2014-04-11)
improvements:
- acceleration for user assignable rotaries on assign home page
- screen flicker and delay fixed when loading cues/scenes/snippets
- scene management improvements and fixes
- remote encoders on assign home page now correctly send out midi messages
- osc server enhancements for X32edit 2.x
new features:
- mix control on compressors (parallel compression option)

2.02 (2014-03-11)
improvements:
- aux/fxrtn sends to subgroup fixed
- output routing tap selector fixed
- dry switch on dimensional chorus
- to end all these discussions: hold sends on fader button (> 1s) to stop
blinking
- stereo delay mono feed diagram corrected
- preamp remote control issue with linked channels fixed
- X32CORE scene recall and show import fixed
- snippets fixed (problem with 1st data line)
- usb recorder assign key 'PREV' fixed
- GO button led fixed
new features:
- assignable controls can be accessed on X32RACK by pressing MUTEGRP & UTILITY
simultaneously
- midi control of mute groups (CC #80..85 on channel 2 [B1 50 xx .. B1 55 xx])
- midi snippet recall ([C1 xx])
- midi cue recall ([C2 xx] 0..127, [C3 xx] 128..255, [C4 xx] 256..383, [C5 xx]
384..499)
- cue and snippet recall on assignable buttons (including name display on small
lcds and assign home screen)
- M/C can be used as effect send bus (FX 1..4)
- V1.x scene/show/library conversion

2.01 (2014-01-23)
improvements:
- dual enhancer fixed
- file version check (show/libs)

2.00 (2014-01-22)
improvements:
- new eq encoder assignment (main lcd)
- channel icon/name visible on fx inserts (dual mono only)
- console init bus send 1-8 default now post eq instead of pre fader
- faders disabled when locked and remote controlled
- comp threshold range reduced to -60..0 dBFS
- sends on fader button flashing
- relaxed sends on fader function (automatically deactivated only by pressing DCA
button)
- improved indication of sends on fader signal flow on small displays
- stagebox lock moved to setup/preamp page
- increased parameter resolution on rackamp
- increased sensitivity on deesser
- gain reduction meter on precision limiter
new features:
- eq on fx return channels
- expander mode (1:2, 1:3, 1:4) in gate section
- 100 band rta/spectrograph (on meter page and as overlay on eq and geq screens)
- user assign rotaries available on assign home page (for producer/compact)
- console lock on HOME button (2.5s), doubles as safe shutdown
- individual eq band reset (w/ undo)
- dca level meters (max post fader level of assigned channels)
- additional pre gate tap for bus sends
- additional post gate tap for outputs
- output routing w/ optional muting (e.g. mute P16 feeds w/ channel mutes)
- smart handling of send levels when changing bus mode
- gate / comp key signal level indication
- additional lcd color modes (inverted display)
- xlr outputs added to routing matrix (e.g. foh passthru)
- sends on fader for mono/center bus and matrices (bidirectional)
- fader extend mode (input channels on bus faders); press two bank select buttons
simultaneously (Producer and Compact only)
- gain split mode for foh/mon; ha gains can only be set on setup/preamp page,
channels have trim only
- gain remote option; allows console gains to be remote controlled by another
console (e.g. use X32RACK as stagebox)
- when pushing the effects button or selecting a channel while on any fx page,
the corresponding fx and layer is
automatically selected when used as insert on selected channel or as send
effect on selected bus
- jump to page user function optionally includes fx layer
- midi control of channel level, mute, and pan
- freeze function on vintage room
- lots of new effects
- new scene management (cues/scenes/snippets)
- faster boot time and smaller update file size

You might also like