Professional Documents
Culture Documents
Artificial Lift
ARTIFICIAL LIFT
Options
TransducersA motor-mounted incremental encoder or Dynamic BrakingDynamic braking is included on small
resolver and corresponding interface may be used for highest units and is optionally available on higher-power units.
performance. The resolver interface provides an encoder Appropriately sized external braking resistors are required.
emulation for paralleling feedback to other devices. Dual- and Packaged DrivesDrives may be ordered as part of a
triple-encoder options are also available for position-following or packaged system including a circuit breaker, operator devices,
dual-transducer applications. and additional system components mounted inside a NEMA 4
Expanded Analog I/OAn analog interface module may be (IP66) enclosure.
used instead of a feedback interface to expand the analog I/O
capabilities of the drive. The module provides eight additional
inputs and four additional outputs.
Specifications
Parameter Specification
Input Rating
Rated Input/Supply Voltage @ 50 Hz 230, 460, or 1150 V AC nominal (200 to 240, 380 to 480, or 950 to 1200 V AC),
three-phase (6-pulse); six-phase (12-pulse) available 50 hp CT and above;
twelve-phase (24-pulse) available on tandem drives Phase sequence insensitive
Voltage Tolerance -50% of nominal, +15% of nominal (11/2 to 100 hp CT)
-15% of nominal, +15% of nominal (above 100 hp CT)
Rated Frequency (Hz) 47 to 63
Power Factor Displacement: 1.00 at all loads and speeds Overall: 0.94 at rated load
Output Rating
Range of Output Voltage (V) Zero to input supply voltage, three-phase
Frequency Zero to 120 Hz for transducer less vector control Zero to 180 Hz for
transducer based vector control Zero to 300 Hz for variable-frequency control
Switching Frequency 1 to 12 kHz, programmable
Inverter Output PWM
Service Conditions
Efficiency at Operation Conditions 97% nominal at rated switching frequency
Pulse Number of Rectifier 6
Overload Current Torque Overload (1 min) Maximum
Constant 150 to 200% of rated 200% of rated
Variable 120 to 150% of rated 140% to 160% of rated
Extended 110 to 120% of rated 120% to 140% of rated
Environmental Specifications
Operating Temperature Control section: -4 to 131F (-20 to 55 C)
Heat sink (standard): -40 to 104F (-40 to 40C)
Heat sink (de-rated): -40 to 131F (-40 to 55C)
Storage Temperature -40 to 158F (-40 to 70C)
Operating Humidity 95% maximum, noncondensing
Altitude To 3,300 ft (1,000 m) without derating
Protection Rating NEMA 3R
Overall Dimensions: in. (mm) 36 18 16 / 48 24 20 / 60 36 36 / 72 44 36
(914 457 406 / 1219 609 508 / 1524 914 914 / 1828 1117 914)
Communication
Communication to SCADA ESP 1200 Communicates with InteLift Remote Monitoring System
Ports One RS-232/422/485, isolated, and two auxiliary RS-422/485
Protocols ANSI-x3.28-2.5-A4 or Modicon RTU, standard
ARTIFICIAL LIFT
Filters
Filter Description
Filter, Sine Wave 50 HP 460V
Filter, Sine Wave 60 HP 460V
Filter, Sine Wave 75 HP 460V
Filter, Sine Wave 100 HP 460V
Filter, Sine Wave 125 HP 460V
Filter, Sine Wave 150 HP 460V
Filter, Sine Wave 200 HP 460V
Filter, Sine Wave 250 HP 460V
Filter, Sine Wave 300 HP 460V
Filter, Sine Wave 400 HP 460V
Filter, Sine Wave 500 HP 460V
Filter, Sine Wave 600 HP 460V
Filter, Sine Wave 800 HP 460V
Filter, Sine Wave 1000 HP 460V
ARTIFICIAL LIFT
Delivery
All of the ESP pumps are fully integrated into Halliburtons industry-leading,
customer-oriented global service network. Beginning at the manufacturing
plant in China, which has provided high-quality ESP systems for operators
across the globe for over a decade, and then to the Halliburton Field
Service Technician who supervises the installation and startup of the
pumps on site, Halliburtons quality-management system helps solve
challenges at any stage of the process for operators in mature
fields, unconventional resources, and deepwater. Control
of this work flow enables continuous improvement in
the hydraulic designs so that they fit customer-specific
requirements, improve operating efficiencies, and adapt
to the dynamic conditions of the oil field.
Halliburtons foundry provides high-quality Halliburtons process entails the latest Halliburton technicians accompany the
ESP stages and assembled/tested pumps for technology in hydraulics, metallurgy, ESP systems to the field and supervise the
a variety of customers and applications all machining, and assembly, and the installation and startup to maximize success.
across the world. quality is assured through the rigorous
quality-management system.
ARTIFICIAL LIFT
Halliburton Locations
Halliburton Headquarters
2014 Halliburton. All rights reserved. Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in the
contract between Halliburton and the customer that is applicable to the sale. H011130 6/14
www.halliburton.com
Artificial Lift