Professional Documents
Culture Documents
SIMPLE PENDULUM
TABULATE
DATA Length, l (cm) Period, T (s)
10.0
20.0
30.0
40.0
50.0
ANALSYING
DATA Period, T (s)
Length, l (cm)
TABULATE
DATA Mass, m (g) Period, T (s)
20
40
60
80
100
ANALSYING
DATA Period, T (s)
Mass, m (g)
TABULATE
DATA Height, h (cm) Velocity, v (ms-1)
20
30
40
50
60
ANALSYING
DATA Velocity, v (ms-1)
Height, h (cm)
TABULATE
DATA Mass of trolley, m (g) or Accelerations, a (ms-2)
No. of trolley
1
2
3
4
5
ANALSYING
DATA Accelerations, a (ms-2)
TABULATE
DATA Force, F (N) Accelerations, a (ms-2)
1
2
3
4
5
ANALSYING
DATA Accelerations, a (ms-2)
Force, F (N)
TABULATE
DATA Mass of load Force, F (N) Extension of the spring,
(g) x (cm)
20
40
60
80
100
ANALSYING
DATA Extension of the spring, x (cm)
Force, F (N)
ANALSYING
DATA
Depth of depression, d (cm)
ANALSYING
DATA Different level, h (cm)
Density, (gcm-3)
ANALSYING
DATA Different level, h (cm)
Depth, y (cm)
ANALSYING DATA
Buoyant force, N
Height of rod
immersed, h (cm)
ANALSYING DATA
Volume of water displaced, cm3
Weight, N
ANALSYING DATA
Temperature change, , oC
ANALSYING DATA
Boiling point oC
Mass of salt, g
ANALSYING DATA
Temperature change, , ( oC)
Mass, m (g)
ANALSYING DATA
Pressure of air, P (Pa)
ANALSYING DATA
Volume of air, cm3
Temperature, oC
ANALSYING DATA
Pressure of air, Pa
Temperature of air, oC
ANALSYING
Angle of refracted, r (0)
DATA
ANALSYING
image distance, cm
DATA
object distance, cm
Keyword :
INFERENCE x depends on a
HYPHOTESIS a increase, x decrease
AIM To investigate the relationship between a and x
VARIABLES MV : a, distance between two speakers
RV : x, distance between two consecutive loud or soft sound
FV : D, distance between the speakers and the sound heard
LIST OF Audio signal generator, loudspeakers, meter rule
APPARATUS
ARRANGEMENT
OF APPARATUS
ANALSYING
DATA
ARRANGEMENT
OF APPARATUS
TABULATE
DATA Depth / cm or number of Wavelength /
Perspex cm
1
2
3
4
5
ANALSYING
DATA
ANALSYING
DATA
PROCEDURE 1. Switched on the switch and start the experiment with length of
constantan wire with length 10.0 cm as shown on diagram above.
2. Observe and record the reading of ammeter and voltmeter.
V
3. Resistance is calculated by using the formula R .
I
4. Repeat the experiment 4 times with different length of constantan
wire which are 15.0 cm, 20.0 cm. 25.0 cm and 30.0 cm.
TABULATE
DATA Length , l (cm) R ()
10.0
15.0
20.0
25.0
30.0
ANALSYING
DATA
R ()
Length , l (cm)
INFERENCE The current flowing through the bulb is influenced by the potential
difference across it
HYPHOTESIS The higher the current flows through a wire, the higher the potential
difference across it.
AIM To investigate the relationship between current and potential difference for
a constantan wire.
VARIABLES MV : current, I
RV : potential difference, V
FV : length of the wire // cross sectional area
LIST OF Constantan wire, dry cells, rheostat, voltmeter, ammeter, meter rule,
APPARATUS connecting wires
ARRANGEMENT
OF APPARATUS
TABULATE
DATA Current, I /A Volt, V / V
0.2
0.3
0.4
0.5
0.6
ANALSYING
DATA
TABULATE
DATA Current, I / A Number of paper clips attracted, N
0.5
1.0
1.5
2.0
2.5
ANALSYING
DATA
ANALSYING
DATA I (A)
h (cm)
INFERENCE Output voltage depends on the number of turns of wire in the secondary
coli
HYPHOTESIS The number of turns of wire in the secondary coil increase, output
voltage increase
AIM To investigate the relationship between output voltage and the number of
turns of wire in the secondary coil
VARIABLES MV : number of turns of wire in the secondary coil
RV : output voltage
FV : number of turns of wire in the primary coil
LIST OF ac voltage, primary coil, secondary coil, soft iron core, output voltage,
APPARATUS number of turns of secondary coil, number of turns of primary coil
ARRANGEMENT
OF APPARATUS
PROCEDURE 1. Use 900 turns copper coil as the primary coil and 100 turns of
secondary coil of the transformer.
2. The switch is on and the output voltage is measured by using a
voltmeter.
3. Repeat the experiment 4 times with different number of turns of
secondary coil which are 200 turns, 300 turns, 400 turns and 500
turns.
TABULATE
DATA Ns V (V)
100
200
300
400
500
ANALSYING
V (V)
DATA
Ns