Professional Documents
Culture Documents
www.vishay.com
Vishay Semiconductors
Photovoltaic MOSFET Driver with Integrated Fast Turn-Off,
Solid-State Relay
FEATURES
Open circuit voltage at IF = 10 mA, 8.4 V typical
Short circuit current at IF = 10 mA, 15 A typical
1 4
Isolation test voltage 4500 VRMS
Turn Logic compatible input
Off
High reliability
2 3 Integrated rapid turn-off circuitry
i179066_6
Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
DESCRIPTION High-side driver
The VOM1271 is a stand-alone optically isolated MOSFET Solid-state relays
driver. Unlike conventional MOSFET drivers, which require Floating power supply
an external power supply to provide VCC and or VDD rails to
the driver itself, the VOM1271 obtains all the required Power control
current to drive its internal circuitry from the LED current on Data acquisition
the low voltage primary side of the isolation barrier. This ATE
saves the designer the space and cost associated with
Isolated solenoid drivers
providing one or more external power supplies. The
VOM1271 also integrates a turn-off circuit internal to the Isolated high current relay drivers
component itself, thus doing away with the need for Isolated high voltage relay drivers
additional components in order to increase the overall
switching speed by decreasing the turn-off time. These AGENCY APPROVALS
features, combined with a small SOP4 package, provide The safety application model number covering all products
designers with a small footprint, highly integrated isolated in this datasheet is VOM1271. This model number should be
gate driver solution for a large variety of MOSFET drive used when consulting safety agency documents.
applications.
UL1577
cUL, equivalent to CSA bulletin 5A
FIMKO EN 60950-1
ORDERING INFORMATION
V O M 1 2 7 1 T SOP-4
VOM1271T
1 4
ton toff
200 pF 90 %
Turn 10 M VOC, ISC
IF OFF
10 %
Output
2 3
10 12
RL = 1 M
9 11
8
10
7
VOC vs. IF (V)
6 9 IF = 10 mA
VOC (V)
RL = 500 k
5 8 IF = 30 mA
4 7
3
6 IF = 5 mA
2
1 5
0 4
0 5 10 15 20 25 30 35 40 45 50 - 40 - 20 0 20 40 60 80 100
Fig. 2 - Output Open Circuit Voltage vs. LED Current Fig. 4 - Output Open Circuit Voltage vs. Ambient Temperature
60 600
50 500
IF = 30 mA
40 400
ton, toff (s)
ISC (A)
30 300
20 200
IF = 10 mA
ton
10 100
IF = 5 mA toff
0 0
- 40 - 20 0 20 40 60 80 100 0 5 10 15 20 25 30 35 40 45 50
Ambient Temperature (C) IF (mA)
Fig. 3 - Output Short-Circuit Current vs. Ambient Temperature Fig. 5 - ton, toff vs. LED Current
2.0 80
1.0 40 IF = 25 mA
0.8
30
0.6 0 C IF = 15 mA
20
0.4
0.2 10 IF = 5 mA
100 C
0 0
20 21 22 23 24 25 0 1 2 3 4 5 6 7 8 9 10
VR (V) VOC - Open Circuit Output Voltage (V)
Fig. 6 - LED Reverse Current vs. Reverse Voltage Fig. 8 - Short Circuit Output Current vs.
Open Circuit Output Voltage
1.6
0 C
1.5
25 C
1.4
VF (V)
1.3 100 C
1.2
1.1
1.0
0 5 10 15 20 25 30 35 40 45 50
IF (mA)
APPLICATION DESCRIPTION
Figure 8 illustrates a standard isolated MOSFET driver such Figure 9 illustrates the ability to do away with external
as Vishays VO1263. Though these parts are generally turn-off circuitry with the VOM1271, by taking advantage of
capable of supplying higher output current, they lack the VOM1271s integrated turn-off circuitry.
integrated fast turn-off circuitry. Thus, if high turn-off speed
is required. external circuitry needs to be provided, as
illustrated in figure one.
2 M
+
Channel 1 Switch 1
P-channel
control N-channel
JFET
MOSFETs
VOM1271 4 VOM1271 4
1
+ 1
+
TURN TURN
OFF OFF
2
- 3
2
- 3
1.50 0.1
Tape slot
in core 5.50
330 0.05
(13") 7.33 2 1
0.1 3 4
+ 0.3
12.00 - 0.1
Regular, special
8 1.50 0.25
or bar code label 8.00 0.1
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
Vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishays knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customers responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customers
technical experts. Product specifications do not expand or otherwise modify Vishays terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.