You are on page 1of 2

Azael Castro Granados 10-D IMT

GLOSARY
1. Above.- in, at, or to a higher 16. Reservoir.- a place where a
place, position, or rank. great stock of anything is
2. Beneath.- in or to a lower accumulated.
position; below. 17. Resurface.- to come to the
3. Bubbles.- a round body of gas surface again.
in a liquid. 18. Seabed.- the bottom of the
4. Buoyancy.- the ability to float sea; seafloor.
5. Decrease.- to diminish or 19. Sealed.- something fixed
lessen in extent, quantity, around the edge of an opening
strength, power; Lessen. to prevent liquid or gas flowing
6. Depth.- a distance measured through it.
from the surface of something 20. Set.- to put (something or
downward, or from the front someone) in a particular place
backward or inward. or posture.
7. Drag.- to be pulled along; to 21. Shelter.- the protection or
move heavily or slowly and safety given by such a thing
with great effort. 22. Strut.- a part used in a
8. Dry.- free from moisture structure to support the whole.
9. Flowing.- moving in or as in a 23. Tapered.- to (cause to)
stream. become thinner toward one
10. Hull.- the hollow, lowermost end.
portion of a ship, floating 24. Teardrop.- something shaped
partially submerged and like a falling drop.
supporting the remainder of the 25. Thick.- the densest or most
ship. crowded part.
11. Lift.- to move or bring 26. Thrust.- a force produced by a
(something) from a lower to a propeller, etc., to propel a
higher position; hoist. missile, ship, etc.; shove.
12. Load.- anything put in or on 27. Tool.- anything used to
something to be carried accomplish a task.
somewhere; freight. 28. Vaulted.- constructed or
13. Lowered.- to move something covered with a vault, as a
into a low position. building or chamber.
14. Propelled.- to push or move 29. Wet.- moistened, covered, or
something somewhere, often soaked with liquid.
with a lot of force. 30. Winch.- a device for hoisting
15. Released.- to free from jail, or hauling.
burden, debt, pain, etc.; to let
go.
Azael Castro Granados 10-D IMT

GLOSARY
1. Approach.- a way of dealing with 17. Polishing.- make the surface of
something. (something) smooth and shiny by
2. Bolting.- fasten (something) with a rubbing it.
metal pin or bar, in particular. 18. Punching.- pierce a hole in (metal,
3. Casting.- an object made by pouring paper, leather, etc.) with or as though
molten metal or other material into a with a punch.
mold. 19. Quenched.- to stop fire from burning.
4. Clamped.- fasten (something) in 20. Reliability.- how accurate or able to
place with a clamp. be trusted someone or something is
5. Conveyor.- a person or thing that considered to be
transports or communicates 21. Scrapped.- discard or remove from
something. service or production things to convert
6. Developments.- the process of it to scrap metal.
developing or being developed. 22. Shear.- break off or cause to break
7. Drilling.- produce (a hole) in off, owing to a structural strain.
something by or as if by boring with a 23. Slightly.- to a small degree; not
drill. considerably.
8. Floor pan.- the lower part of the body 24. Storing.- keep or accumulate
of a motor vehicle. (something) for future use.
9. Frame.- a rigid structure that 25. Turning.- the action or skill of using a
surrounds or encloses something lathe.
such as a door or window. 26. Vessel.- a ship or large boat.
10. Gauge.- estimate or determine the 27. Waste.- eliminated or discarded as no
magnitude, amount, or volume of. longer useful or required after the
11. Improvements.- an example or completion of a process.
instance of improving or being 28. Welding.- join together (metal pieces
improved. or parts) by heating the surfaces to
12. Layers.- a sheet, quantity, or the point of melting.
thickness of material, typically one of 29. Windshield.- a window at the front of
several, covering a surface or body. the passenger compartment of a
13. Lean manufacturing.- is a motor vehicle.
systematic method for waste 30. Yield strength.- the stress required to
minimization within a manufacturing produce a small-specified amount of
system without sacrificing productivity. plastic deformation.
14. Mass-produced.- to manufacture
(goods) to a standardized pattern on
a large scale.
15. Nut.- a small ring of metal that a bolt
can be screwed into to hold
something in place
16. Overall.- in all parts; taken as a
whole.

You might also like