1 Turn off the write protection of the Dreimgo Memory Card.
2 Connect the memory card or the navigation device to PC, then create the following path on the memory card: igo8/content/userdata/POI. 3 Download, unzip and copy the the downloaded .kml files to the above map. 4 Restart your navigation device. 5 Run the navigation software and swich to Advanced mode. Choose the Manage POI icon. 6 Choose downloaded POIs (kml file); then choose Edit and set the distance of POI icon visibility. The default icon is Google Earths globe. 7 In the Navigation menu choose Find POI, and choose as Destination.
Note: some POIs might not be reachable on the map, if the map is not detailed enough.
Speedcam iGO8
1 Download as speedcam the iGO8_txt.zip file to a folder on your PC.
2 Unzip the two files, speedcam.txt and POIplaza-iG08 Notes.txt. 3 Copy the speedcam.txt file to the Storage card/igo8/content/speedcam. 4 Restart iGO8, the file will automatically update the database. 5 There will now be three files in the speedcam directory, speedcam.spdb, speedcam.txt and SpeedcamUpdates.spud. 6 Allow the device to detect a GPS signal. When this is done the speedcam locations will be active. 7 Check Settings/Warnings has Speed Camera Warning enabled.
Note: conversion of speedcam files is time consuming especially in case of a large
file. During conversion an 'init warning messages' message is visible.
MAGYAR
POI
1 A krtyn kapcsolja ki az rsvdettsget (az oldaln tallhat pckkel).
2 Hozza ltre a krtyn az albbi knyvtrat: igo8/content/userdata/POI. 3 Tltse le, csomagolja ki, majd msolja be a letlttt. kml fjlokat ebbe a mappba. 4 Indtsa jra a navigcis eszkzt. 5 Indtsd el a navigcis programot, vlassza a Profi mdot, majd a Kezels ikont. 6 A listbl vlassza ki a bemsolt POI-t; majd a Szerkeszts gomb segtsgvel aktivlja lthatsgt, s vlassza ki hozzrendelhet ikonjt. Az ikon alaprtelmezsben a Google Earth fldgmbje. 7 A Navigcis men Keressben vlassza ki a POIt, s jellje ki ticlknt.
Megjegyzs: Elfordulhat, hogy egyes POI elrhetetlen helyen fekszik, ha a trkp
nem kellen rszletes.
Traffipax iGO8
1 Tltse le a traffipaxok iGO8_txt.zip llomnyt szmtgpre.
2 Csomagolja ki a letlttt llomnyt. 3 Msolja a speedcam.txt llomnyt az SDcard/iGO8/content/speedcam knyvtrba. 4 Indtsa jra az iGO8-at. Az adatok a msolssal automatikusan betltdnek. 5 A speedcam mappban hrom llomny jn ltre: speedcam.spdb, speedcam.txt s SpeedcamUpdates.spud. 6 Kszlkvel keressen mholdjelet. Vtel utn a traffipax pozcik aktivldnak. 7 Engedlyezze a traffipaxok hasznlatt a Belltsok/Figyelmeztsek/Figyelmeztets sebessgmr kamerra ngyzet kipiplsval.
Megjegyzs: a speedcam.txt llomny konverzija idignyes, kivlt nagyobb fjl
esetben. A konvertls tartama alatt az 'init warning messages' zenet lthat.