Professional Documents
Culture Documents
- Models with * are supported by Upgrade Advisor, these models are NOT
RECOMMENDED to use this offline update package.
Instruction:
1. Make backup for your phone, for example, copy data to your PC. And make
sure the OS of your PC must be at least Windows 7 Service Pack
1. Windows 8/8.1/10 are also acceptable, but you must install every Visual
C++ Redistributable Runtime and Windows Device Recovery Tool.
2. Check your OS version in about phone. The OS version must be at least
8.10.14219.341 or newer. If the version is lower than required, please update
it. You may want to use Windows Insider app from Windows Store. REMOVE
YOUR PIN LOCK to prevent from some unknown issues after an upgrade.
3. Download and open the package by 7-Zip. Choose your model and extract
the exact folder from it. For example, Nokia Lumia 820 should extract 480x800
folder from 2nd Generation folder. DO NOT EXTRACT cabs in that folder.
4. Press Win(Command)+R, in run command dialog, type "control printers"
and run. Unplug your phone and remove
your phone in Device and Printers window.
5. Extract iutool package attached below, and open a command prompt
window with Administrator privilege. Change working directory to iutool.exe's
location.
6. Plug your phone to your PC, then type this command:
iutool -l
7. If your phone is shown in command prompt window, then type this
command:
iutool -V -p D:\480x800
(For example I have extracted this folder in Drive D)
8. Wait for about 40 minutes, then your phone will be in
Win10 Mobile 10586.107.
9. Open Developer mode in "For Developers" option, then deploy tools that
could modify phone's model to your phone.
10. Use any method that you know to modify your model, for example, I
modified model to Microsoft RM-1116 (Lumia 950 XL Dual SIM). If you are
going to use VCreg or Interop Tools, you needn't to Restore NDTKSvc.
11. Check update, and you will receive another update to Win10 Mobile 14393
or later stable builds. Update to this build will fix critical issues you met.
12. After the update to another build, I recommended you to perform a hard
reset to your phone. That would make the phone works at the best state.
Here's the demostration of upgrade Nokia Lumia 1020 (Hong Kong Variant) to
W10M 10586.107:
https://www.youtube.com/watch?v=Ozt4QuQJj5U
Known issues:
- If the pre-installed default IME doesn't include English (United States), after
an upgrade by this offline update package, pre-installed IME won't work.
Please make sure your firmware's pre-installed IME included English (United
States). However, if you modify your model by using Interop Tools by
gus33000 then perform another update, IME issue will be fixed. Because this
update package is made for Chinese users and China variant firmware at first,
I couldn't take care of every variants. Sorry for that.
- To HTC 8X/8XT users: HTC 8X/8XT Support will be available in the next
version.
- To Nokia Lumia 638 users: Please flash the latest China Variant Firmware
(India Variant is not as stable as China Variant) to make sure the phone works
at the best state, then download Upgrade Advisor from Windows Store to
upgrade.
- To Prototype model users especially the cancelled model: Please make a
full backup of phone first by using WinHex or something else. If you didn't do
that, unbrick the prototype model is almost impossible.
- Because phones with 4GB ROM aren't capable for these package such
as Nokia Lumia 530 and HTC 8S, this update package is not suitable for these
models.
- To Nokia Lumia 1020 users: Update to Windows 10 Mobile will reduce the
performance of precious 41MP Camera. If your Nokia Lumia 1020 is used for
photography, DO NOT UPGRADE.
- Glance screen feature will be lost after another update to 14393 or later
build, but it's possible to fix by using Interop Tools by gus33000.
- To Samsung ATIV S (GT-I8750) and ATIV SE users: Offline Update
Packages to WP8.1GDR1 or GDR2 is available now. Now you can update to
WP8.1GDR1 or GDR2 without using SDK Deployment.
- To Samsung ATIV S (GT-I8750) users: make sure you are using XXDOC2
firmware before update.
You can also enable Mobile Enterprise on your phone. Just extract
MobileEnterprise.ppkg from Enterprise_Configuration_File_for_TH2_Builds
folder, and copy it to your phone, then tap "Yes, add it" on your phone. Soon
your phone will become into Windows 10 Mobile Enterprise. Reboot
your phone, Settings - Phone Update, Advanced options, and there's a "Defer
Upgrade" available, now check it, then search update. If you still can't get any
update, please modify your model and search update again.
Thanks for the collection here: http://forum.xda-developers.com/wind...n-cab-
t3234805 , and now it's possible to upgrade old models without Unlock
Bootloader and Interop Unlock with SD card and WP8 SDK.
P.S. Only V4 and V3 set available here. V1 and V2 are deprecated and
archived in Chinese Community.
Special Thanks:
@gus33000 for his Interop Tools
@zephray for LG Lancet W10M Update Package grabbing
DPMason, Ren, Max for provide devices to grab packages
Attached Files
W10M_Offline_Update_V3.txt - [Click for QR Code] (70 Bytes, 6556 views)
iutool.7z - [Click for QR Code] (2.38 MB, 7434 views)
Internal_IME_Fix.txt - [Click for QR Code] (70 Bytes, 3604 views)
W10M_Offline_Update_V4.txt - [Click for QR Code] (70 Bytes, 2434 views)
W10M_Offline_Update_V4.1.txt - [Click for QR Code] (70 Bytes, 3572 views)
WP8.1_Offline_Specific_Models.txt - [Click for QR Code] (50 Bytes, 1920 views)