You are on page 1of 1

Installation Instructions

Position tree stake firmly in the


ground, leaning at a 75 degree angle
against the direction of the prevailing
wind. For best results, the tree stake
should intersect the tree trunk
between 3 and 4 feet above the
ground or about halfway up the trunk,
if the tree is smaller than 6 feet.

Cut sufficient length of ProLock®


Chain Lock Tree Tie to easily wrap
around both, the tree stake and the
tree itself. It’s a good idea to cut a
little extra length, so that it can be
adjusted as the tree grows.

Wrap the cut strip of ProLock®


around both, the tree stake and the
tree, feeding the chain through itself,
then twisting and locking it snuggly.
Adjust regularly to avoid damage to
the tree bark.

28305 State Route 7, Marietta, OH 45750


P: 800.334.3776 F: 740.374.2700
www.edgepro.com

You might also like