You are on page 1of 4

Reference: Issue No.

14-09A 1
Issue Date:
ECC HHP Product Support
Service Centre Technical Tip 10/09/14
Original / Supersedes Supplements / :

Original

Title: Compiled by: Approved by:

GT-I9301i Boot Recovery


Giacomo Stagetti HHP Technical
Supervisor

Applicable GT-I9301i
Models

Issue
No Power on
Unable to enter download mode
Boot recovery after memory replacement

For more information view the latest User or Service manuals on GSPN. If you have any questions please
raise them via the Subsidiary Technical Support

Page 1 of 4
Paolieri elettronica srl

Description

Brief Process:

1. Download pit and bootloader files to micro SD card using working operational normal
phone
2. Insert the micro SDcard into th no power phone and try to enter in download mode

Pre-requisite:

MicroSD card: capacity should be at least 4 GB


Normal working GT-I9301i to copy pit and bootloader to SDcard
Odin 3.0.9
Pit: I9301i_boot_recovery.pit
Bootloader: normal bootloader file

For more information view the latest User or Service manuals on GSPN. If you have any questions please
raise them via the Subsidiary Technical Support

Page 2 of 4
Paolieri elettronica srl

Step1

Creation of SDcard for use in Boot recovery process:


If you have already made the sdcard go to step 2

Execute Odin 3.0.9 and load the necessary files:

1. Load PIT file


2. Load Bootloader
3. Check T-Flash option
4. Connect the phone to PC

Click the Start button to download pit and bootloader to SDcard.

When the phone reboots process is done; you can check the size of SDcard:
If you use 8gb SDcard the memory available after process is only 64 mb.
If the phone shows Blank SDcard or Unsupported Filesystem all is ok.

For more information view the latest User or Service manuals on GSPN. If you have any questions please
raise them via the Subsidiary Technical Support

Page 3 of 4
Paolieri elettronica srl

Step2

Boot Recovery Process

1. Insert Sdcard in faulty phone


2. Insert the battery and press Vol.down, Home key and power on the device
3. If the phone is successfully recovered, you can see like below

Now you can download full S/W ( BL,AP,CP,CSC ) or COMBINATION file if you want
calibrate it.

For more information view the latest User or Service manuals on GSPN. If you have any questions please
raise them via the Subsidiary Technical Support

Page 4 of 4

You might also like