You are on page 1of 9

Which tool is used for hardware to stand on to prevent static electricity from building up?

A) Wire cutter
B) Hex driver
C) Anti-static mat
D) Flat head screwdriver
E) Philips head screwdriver

2. Which tool is used to loosen or tighten cross-head screws?

A) Wire cutter
B) Torx Screwdriver
C) Hex driver
D) Anti-static mat
E) Philips head screwdriver

3. Which tool is used to strip and cut wires?

A) Hex driver
B) Wire cutter
C) Part Retriever
D) Philips head screwdriver
E) Cable ties

4. Which tool is sometimes called a nut driver?

A) Hex driver
B) Philips head screwdriver
C) Flat head screwdriver
D) Torx Screwdriver
E) Part Retriever

5. Which tool is used to retrieve parts from location that are too small for your hand to
fit?

A) Torx Screwdriver
B) Cable ties
C) Lint-free Cloth
D) Flat head screwdriver
E) Part Retriever

6. Which tool is used to clean different computer components without scratching or


leaving debris?

A) Cable ties
B) Flat head screwdriver
C) Lint-free Cloth
D) Part Retriever
E) Anti-static mat

7. Which tool is used to bundle cables neatly inside and outside of a computer?

A) Part Retriever
B) Torx Screwdriver
C) Cable ties
D) Lint-free Cloth
E) Anti-static mat

8. Which tool is used to loosen or tighten screws that have a star-like depression on the
top?

A) Torx Screwdriver
B) Hex driver
C) Flat head screwdriver
D) Philips head screwdriver
E) Part Retriever

9. Which tool is used to blow away dust and debris from different computer parts without
touching the components?

A) Compressed air
B) Lint-free Cloth
C) Wire cutter
D) Anti-static mat
E) Part Retriever

10. Which of the following statements is the function of the image above?

A) It is used to prevent ESD damage to computer equipment.


B) It is used to stand on or place hardware on to prevent static electricity from building up.
C) It is used to loosen or tighten slotted screws.
D) It is used to loosen or tighten screws that have a star-like depression on the top.
E) It is used to loosen or tighten cross-head screws.
11. Which of the following statements is the function of the image above?

A) It is used to loosen or tighten cross-head screws.


B) It is used to stand on or place hardware on to prevent static electricity from building up.
C) It is used to loosen or tighten screws that have a star-like depression on the top.
D) It is used to prevent ESD damage to computer equipment.
E) It is used to loosen or tighten slotted screws.

12. Which of the following statements is the function of the image above?

A) It is used to loosen or tighten screws that have a star-like depression on the top.
B) It is used to stand on or place hardware on to prevent static electricity from building up.
C) It is used to loosen or tighten cross-head screws.
D) It is used to bundle cables neatly inside and outside of a computer.
E) It is used to prevent ESD damage to computer equipment.

13. Which of the following statements is the function of the image above?

A) It is used to hold screw, jumpers, fasteners and other small parts and prevents them from
getting mixed together.
B) It is used to loosen or tighten screws that have a star-like depression on the top.
C) It is used to blow away dust and debris from different computer parts without touching the
components.
D) It is used to stand on or place hardware on to prevent static electricity from building up.
E) It is used to prevent ESD damage to computer equipment.
14. Which of the following statements is the function of the image above?

A) It is used to loosen or tighten screws that have a star-like depression on the top.
B) It is used to loosen or tighten slotted screws.
C) It is used to prevent ESD damage to computer equipment.
D) It is used to loosen or tighten cross-head screws.
E) It is used to manipulate small parts.

15. Which of the following statements is the function of the image above?

A) It is used to manipulate small parts.


B) It is sometimes called a nut driver, is used to tighten nuts.
C) It is used to loosen or tighten screws that have a star-like depression on the top.
D) It is used to loosen or tighten slotted screws.
E) It is used to loosen or tighten cross-head screws.

16. Which of the following statements is the function of the image above?

A) It is used to stand on or place hardware on to prevent static electricity from building up.
B) It is used to test the functionality of computer ports.
C) It is used to manipulate small parts.
D) It is used to test the integrity of circuits and the quality of electricity in computer components.
E) It is used to prevent ESD damage to computer equipment.

17. Which of the following statements is the function of the image above?

A) It is used to manipulate small parts.


B) It is used to test the integrity of circuits and the quality of electricity in computer components.
C) It is used to prevent ESD damage to computer equipment.
D) It is used to stand on or place hardware on to prevent static electricity from building up.
E) It is used to test the functionality of computer ports.

18. Which of the following statements is the function of the image above?

A) It is used to hold small parts.


B) It is used to stand on or place hardware on to prevent static electricity from building up.
C) It is used to test the integrity is used to stand on or place hardware on to prevent static
electricity from building up.y of circuits and the quality of electricity in computer components.
D) It is used to prevent ESD damage to computer equipment.
E) It is used to test the integrity of circuits and the quality of electricity in computer components.

19. Which of the following statements is the function of the image above?

A) It is used to hold small parts.


B) It is used to test the integrity of circuits and the quality of electricity in computer components.
C) It is used to stand on or place hardware on to prevent static electricity from building up.
D) It is used to prevent ESD damage to computer equipment.
E) It is used to retrieve parts from location that are to small for your hand to fit.
20. Which of the following statements is the function of the image above?

A) It is used to stand on or place hardware on to prevent static electricity from building up.
B) It is used to blow away dust and debris from different computer parts without touching the
components.
C) It is used to bundle cables neatly inside and outside of a computer.
D) It is used to test the integrity of circuits and the quality of electricity in computer components.
E) It is used to hold screw, jumpers, fasteners and other small parts and prevents them from
getting mixed together.

21. Which of the following statements is the function of the image above?

A) It is used to loosen or tighten cross-head screws.


B) It is used to loosen or tighten screws that have a star-like depression on the top.
C) It is used to loosen or tighten slotted screws.
D) It is used to manipulate small parts.
E) It is used to prevent ESD damage to computer equipment.

22. Which of the following statements is the function of the image above?

A) It is used to loosen or tighten screws that have a star-like depression on the top.
B) It is used to loosen or tighten cross-head screws.
C) It is used to loosen or tighten slotted screws.
D) It is used to manipulate small parts.
E) It is used to prevent ESD damage to computer equipment.
23. Which of the following statements is the function of the image above?

A) It is used to prevent ESD damage to computer equipment.


B) It is used to manipulate small parts.
C) It is used to loosen or tighten screws that have a star-like depression on the top.
D) It is used to loosen or tighten cross-head screws.
E) It is used to loosen or tighten slotted screws.

24. Which of the following statements is the function of the image above?

A) It is used to loosen or tighten slotted screws.


B) It is used to loosen or tighten screws that have a star-like depression on the top.
C) It is used to loosen or tighten cross-head screws.
D) It is used to manipulate small parts.
E) It is used to strip and cut wires.

25. Which of the following statements is true about anti-static wrist strap?

A) It draws static electricity away from a component.


B) It draws static electricity towards the component.
C) It is a conductor that connects your body to the ground where you are standing.
D) It equalizes the electrical charge between you and the equipment.
E) It attracts electricity from the AC source.

26. Which of the following statements is true about anti-static mat?

A) It draws static electricity towards the component.


B) It equalizes the electrical charge between you and the equipment.
C) It is a conductor that connects your body to the ground where you are standing.
D) It draws static electricity away from a component.
E) It attracts electricity from the AC source.
27. Classify the tool that appears above.

A) Hand Tools
B) Diagnostic Tools
C) Electro-Static Discharge (ESD) Tools
D) Cleaning Tools

28. Classify the tool that appears above.

A) Cleaning Tools
B) Hand Tools
C) Electro-Static Discharge (ESD) Tools
D) Diagnostic Tools

29. Classify the tool that appears above.

A) Electro-Static Discharge (ESD) Tools


B) Hand Tools
C) Diagnostic Tools
D) Cleaning Tools
30. Classify the tool that appears above.

A) Electro-Static Discharge (ESD) Tools


B) Hand Tools
C) Diagnostic Tools
D) Cleaning Tools

You might also like