You are on page 1of 2

TECHNICAL DATA

ARCHITECTURAL COATINGS

TOUCHWOOD
www.asianpaints.com/oman AC Thinner with Retarder
PRODUCT DESCRIPTION
BERGER Touch wood AC Thinner (with retarder) is a special thinner designed for all Touchwood AC Products to take
care of fast drying in summer. This thinner is slow evaporating as compared to the regular AC thinner T-124 and hence
gives very good surface finish specially in summer, when used in Acid catalysed clear and Pigmented products.

RECOMMENDED AREAS OF APPLICATION


This thinner performs satisfactorily in Acid catalysed clear and pigmented products.

TECHNICAL DATA
Composition Nominal : Homogenous mixture aromatic hydrocarbons, esters and alcohols

Specific gravity : 0.86 0.01

Pack Size : 1 USG, 5 USG, 200 LTR

Theoretical Coverage Capacity : Not Applicable

Practical coverage : Not Applicable

APPLICATION DATA

Thinning ratio (by vol.) : As recommended in the individual data sheet of Acid Cured Products.

APPLICATIONS DETAILS
It gives desired application viscosity when mixed with various Acid Cured finishes in the ratio as recommended in the
individual Product Data Sheet.
RECOMMENDED PAINT SYSTEM
Not applicable.

* For detailed system recommendation based on specific requirements please contact Berger representative.

STORAGE, SAFETY INFORMATION AND PRECAUTIONS

Flammability and Transport Information:


Highly flammable, Dangerous goods class 3.1, Flash point below 20C, UN 1263, PG

Safety information and precautions:


It should be stored like all other paint thinners away from any open fire / fire source.
The temperature of storeroom should be maintained between 30-35C like other thinners.
While handling this thinner, standard practice of wearing Personal Protective Equipments such as overalls, hand
gloves and eye goggles are recommended.
Keep out of reach of children, store in a cool dry, well ventilated place.
Dispose off in a landfill. Do not dispose in any drain or water channel.

DISCLAIMER
The information provided in this data sheet is not intended to be complete. It is the responsibility of the user to ensure that the product used is suitable for the purpose it is meant to serve.
In view of various factors affecting the performance of the coating, we cannot assume responsibility for the product performance, nor do we accept any liability arising from use of this
product, unless specifcally agreed to in writing by us. The information provided in the datasheet may be modifed by us without notice.

This Technical Data Sheet supersedes those previously issued with immediate effect.

BAHRAIN: + 973-17-730700 OMAN: + 968-24596709 UAE: +971-4-3391000

Version: 02/2007

You might also like