Professional Documents
Culture Documents
Aim: To design and test an amplifier circuit and to calculate the following parameters
Procedure:
1. Connect the circuit as per the circuit diagram drawn.
2. Keeping the input voltage constant (consider the value between 50mV 500mV), vary the
frequency from 50Hz to 3MHz in regular steps and note down the corresponding output voltage.
3. Plot the graph: Gain (dB) Vs Frequency
4. Calculate the bandwidth from the graph.
5. Calculate the input and output impedance.
6. Remove Emitter Capacitance, and follow the same procedures (1 to 5).
Circuit diagram:
1
DATE: Name:
Experiment No. 1 VTU / Batch No.:
Design Step:
(*Aim - To find the Resistance and Capacitor Values to be used in the circuit for obtaining desired output )
2
DATE: Name:
Experiment No. 1 VTU / Batch No.:
Initial Setting:
VCC = VOUT =
VIN =
Frequency =
Observation: *With CE
10
11
12
Result: ...................................................................................................................................................................
................................................................................................................................................................................
................................................................................................................................................................................
................................................................................................................................................................................