Professional Documents
Culture Documents
USE:-
Manufacturing of ferro-chrome and ferro-
manganese
Mr. Vijay Balu Raskar - Electrical Engineer
Principle of transformers
In the transformer, supply is utilized by secondary.
Mr. Vijay Balu Raskar - Electrical Engineer
Induction method is based on Principle of Electromagnetic
Induction
When alternating Current flows in a conductor it produces
alternating flux.
If any other conducting material is placed in this magnetic flux
emf gets induced in it
This induced emf drives eddy current in that piece and power
loss due to eddy currentMr.appears
Vijay Balu Raskar as heat.
- Electrical Engineer
Factors for Induction heating:-
1) it is proportional to relative
permeability. Heating produced in
magnetic material is more than non
magnetic material.
2) Heating is proportional to MMF.
Force can be vary by changing current
or number of turns.
3) Heating effect can be increased by
employing high frequency supply.
Mr. Vijay Balu Raskar - Electrical Engineer
DIRECT INDUCTION HEATING
In this, currents are induced in the charge itself. This is usually used
in furnaces for smelting (extraction of metal from ore), melting of
metals etc.
This requires very high frequency supply.
They are classified as core and coreless type induction furnaces.
Mr. Vijay Balu Raskar - Electrical Engineer
INDIRECT INDUCTION HEATING
(Example :- Oven)
Limitations:-
1) Poor Power factor
2) Complicated Construction
Applications:-
It is used for general heat treatment of metallic and other charges.