You are on page 1of 78

= SC1000

Configuration
Manager
Contents

1 Intrroduction ...................................... .................................................................................. 3


2 Insstallation........................................ .................................................................................. 3
3 SC
C1000 Softw e ................ .................................................................................. 5
ware Update
4 e .................................. .................................................................................. 6
User Interface
4.1 nu ................................ .................................................................................. 6
Root Men
4.1.1 UP Button ................... .................................................................................. 6
SETU
4.1.2 CE SPEED button ...... .................................................................................. 7
TRAC
4.1.3 TREN n ................ .................................................................................. 7
NDS Button
4.2 Setup Button Menu ................... ................................................................................ 11
4.2
2.1 em Menu .................... ................................................................................ 12
Syste
4.2
2.2 ent Menu ..................... ................................................................................ 16
Patie
4.2
2.3 order Menu.................. ................................................................................ 19
Reco
4.2
2.4 ECG Menu ......................... ................................................................................ 21
4.2
2.5 RESP Menu ....................... ................................................................................ 28
4.2
2.6 SPO2 Menu ........................ ................................................................................ 32
4.2
2.7 TEMP Menu ...................... ................................................................................ 38
4.2
2.8 IBP1 Menu ......................... ................................................................................ 42
4.2
2.9 2 ................................... ................................................................................ 51
IBP2
4.2 P Menu ........................ ................................................................................ 52
2.10 NIBP
4.2
2.11 CO2 Menu
M .......................... ................................................................................ 60
4.2
2.12 DEFA nu .............. ................................................................................ 69
AULTS Men
4.2 RM SETUP Menu ....... ................................................................................ 69
2.13 ALAR
4.3 Comport Setup ......................... ................................................................................ 73
4.4 Saving Co
onfiguration e use ....................................................................... 73
ns for future
4.5 Setting Defaults ........................ ................................................................................ 74
4.6 Default Alarm
A Limits ................. ................................................................................ 75
4.7 Transferring the conffiguration fille ............................................................................. 76
4.8 Restoring efaults ....... ................................................................................ 77
g Factory De

2
1 In
ntroducttion

The SC
C1000 config guration ma
anager is a software uttility that wa
as developeed to manag
ge the
SC10000 default se
ettings.

The sofftware enab


bles the tech
hnician to u n configurattion settingss across all of their
use common
SC1000 ns compact monitors.
0 Smartsign

Through the utility the user ca


an build up a library of common co onfiguration files that ca
an be
ed to the SC
uploade C1000 via th
he monitorss serial portt connection
n.

These cconfiguratio
on files can be tailored to suit the needs
n and requiremen
r ts of differe
ent
wards.

2 In
nstallation

To instaall the SC10


000 Configuuration utilityy you will re
equire windows based computer withw a
serial port connecttion or a US
SB to serial port adapte er, CD/DVD drive and aan internet
connection.

The connfiguration manager


m ca
an only be i nstalled on a Windows
s XP or new
wer versions
s of
operatin
ng system running.
r

Once co e system will request a reboot .


omplete the

Switch the PC on, once windo


ows has fullly loaded insert the disk in to the C
CD/DVD driive of
the com
mputer.

The bellow window


w will appear, select Op
pen folder to
o view files.

If the installation do
oes not automatically sstart then, proceed
p as follows:-

Select sstart now se


elect compu
uter and loccate and sellect your CD
D/DVD drivee.

3
he Setup folder and se
Open th elect the se
etup.exe Ico
on.

e Icon and the


Double click on the t installattion will beg
gin.

Agree to the .Net frame


f work EULA when
n if prompte
ed.

he installatio
Once th on is completed an Ico
on will be av
vailable on your All proograms menu.

4
3 SC
C1000 Softwar
S re Upda
ate

The SC
C1000 configguration ma
anager will o
only work with
w SC1000
0 software vversion 2.0.0 or
above installed.

To checck the softw


ware version
n that is insttalled on yo
our SC1000, turn the m
monitor on, the
t first
user inp
put screen you
y are presented with h is shown below.
b

If the m
monitor has previously
p been
b config uration manaager, the Patient
gured using the configu
group sselection screen might have been disabled.

To conffirm the softtware versio


on, select th
he SETUP button
b on your monitorr and the ve
ersion
numberr will be disp he bottom off the Setup page.
played at th

If you do not have the correct version insstalled, locate the upda
ate that cam
me with the SC1000
S
configuration mangger.

o SC1000 Service
Refer to S ma
anual for gu n upgrading the Moniitor software.
uidance on

5
4 Us
ser Inte
erface

4.1 R
Root Men
nu

When the SC10000 Configurattion manage


er has been
n started you will be preesented witth the
screen shown belo
ow.

4.1.1 SE
ETUP Buttton

Selectin p button from the root m


ng the setup menu will display the SETUP
S Buttton menu to
o the
right of the root me
enu.

Removiing the tick from the En


nabled checck box below the root menu,
m will ddisable all buttons
in the setup button
n menu funcctions on the
e target mo
onitor.

6
4.1.2 TR
RACE SPE
EED butto
on

Removiing the tick from the En


nabled checck box below the root menu,
m will ddisable all buttons
in the setup button
n menu funcctions on the
e target mo
onitor.

op down sellection box allows the sselection off the trace speed,
The dro s this ccan be set to:-
t

6.25mm/s
12.5mm/s
25mm/s
50mm/s

Facctory defaultt setting is 25mm/s.


2

4.1.3 TR
RENDS Bu
utton

Selectinng the TREND button from


f the roo
ot menu will display the
e TREND B
Button menu
u to the
right of the root me
enu.

Removiing the tick from the En nabled checck box below the ROOT button meenu with the e
TREND D button seleected, will disable
d all b
buttons on th
he TREND button mennu on the ta
arget
monitorr after update.

All settings will stilll be visible to


t the user but they will not be able to able too make changes to
them.

7
ECG H
HR button

Removiing the tick from the En nabled checck box below the TREN
NDS buttonn menu with the
ECG HR button se elected, will disable the
e ECG TRND Button, preventing
p thhe user from
m
switchin
ng on and off
o the ECG trend data..

The dro
op down sellection box allows on o
or off to be selected
s as the defaultt.

Factoryy default is on.


o

RESP BR
Removiing the tick from the En
nabled checck box below the TREN
NDS buttonn menu with the
RESP B BR button selected,
s will disable th
he RESP BR
R TRND Button, prevennting the us
ser from
switchin
ng on and off
o the RESP P trend data a.

The dro
op down sellection box allows on o
or off to be selected
s as the defaultt.

Factoryy default is on.


o

Examplle as per EC
CG HR.

SPO2 O2
nabled checck box below the TREN
Removiing the tick from the En NDS buttonn menu with the
SPO2 OO2 button selected, will disable the
e SPO2 O22 TREND Button, preveenting the user
u
from sw
witching on and
a off the SPO2 O2 ttrend data.

The dro
op down sellection box allows on o
or off to be selected
s as the defaultt.

Factoryy default is on.


o

Examplle as per EC
CG HR.

8
SPO2 PR

Removing the tick from the Enabled check box below the TRENDS button menu with the
SPO2 PR button selected, will disable the SPO2 PR TREND Button, preventing the user
from switching on and off the SPO2 PR trend data.

The drop down selection box allows on or off to be selected as the default.

Factory default is on.

Example as per ECG HR.

TEMP T1

Removing the tick from the Enabled check box below the TRENDS button menu with the T1
button selected, will disable the T1 TREND Button, preventing the user from switching on
and off the T1 trend data.

The drop down selection box allows on or off to be selected as the default.

Factory default is on.

Example as per ECG HR.

TEMP T2

Removing the tick from the Enabled check box below the TRENDS button menu with the T2
button selected, will disable the T2 TREND Button, preventing the user from switching on
and off the T2 trend data.

The drop down selection box allows on or off to be selected as the default.

Factory default is on.

Example as per ECG HR.

IBP1
Removing the tick from the Enabled check box below the TRENDS button menu with the
IBP1 button selected, will disable the IBP1 TREND Button, preventing the user from
switching on and off the IBP1 trend data.

The drop down selection box allows on or off to be selected as the default.

Factory default is on.

Example as per ECG HR.

9
IBP2

Removing the tick from the Enabled check box below the TRENDS button menu with the
IBP2 button selected, will disable the IBP2 TREND Button, preventing the user from
switching on and off the IBP2 trend data.

The drop down selection box allows on or off to be selected as the default.

Factory default is on.

Example as per ECG HR.

CO2 ETCO2

Removing the tick from the Enabled check box below the TRENDS button menu with the
CO2 button selected, will disable the ETCO2 TREND Button, preventing the user from
switching on and off the ETCO2 trend data.

The drop down selection box allows on or off to be selected as the default.

Factory default is on.

Example as per ECG HR.

CO2 RR

Removing the tick from the Enabled check box below the TRENDS button menu with the
CO2 RR button selected, will disable the CO2 RR TREND Button, preventing the user from
switching on and off the CO2 RR trend data.

The drop down selection box allows on or off to be selected as the default.

Factory default is on.

Example as per ECG HR.

10
R TRENDS
CLEAR S

Removiing the tick from the En nabled checck box below the TREN NDS buttonn menu with the
CLEAR R TRENDS button
b seleccted, will dissable the CLEAR
C TRENDS Buttonn, preventinng the
user fro
om clearing all patient trend
t data oon the targeet monitor.

4.2 S
Setup Buttton Men
nu

Selectinng any of th
he buttons on
o the setup
p menu will bring up the
e related buutton menu to the
right of the setup menu
m as shoown below.

11
4.2.1 Sy
ystem Me
enu

Removiing the tick from the En nabled checck box below the set up menu, witth the syste em
button sselected, will disable th
he sub funcctions of this
s button on the target ppatient monitor.

LANG
Removiing the tick from the En nabled checck box below the SYST TEM buttonn menu, withh the
LANG b button seleccted, will dis t languagge setting on the
sable the ussers ability to change the
target m
monitor.

op down sellection box allows the d


The dro default lang
guage to be set.

Factoryy default is English.


E

12
DATE
TIME/D
Removiing the tick from the Ennabled checck box below the SYST TEM buttonn menu, with
h the
TIME/DDATE button n selected, will
w disable the users ability
a to change the tim
me and date
e on the
target m
monitor.

END
SUSPE
Removiing the tick from the En
nabled checck box below the SYST TEM buttonn menu with the
SUSPE END button selected, will
w disable t he users ability to change the susspend duration on
the targ
get monitor.

The dro
op down sellection box allows the d default susppend duration to be seet to 2minute
es, 5
minutess, 15minute
es and infinitty on the ta rget monito
or.

13
LIANCE
BRILL
Removiing the tick from the Ennabled checck box below the SYST TEM buttonn menu with the
BRILLIAANCE butto on selected,, will disable
e the users
s ability to change the BBRILLIANCCE of the
display on the target monitor.

The barr that appea


ars below th
he SYSTEM M button me enu with thee BRILLIANC CE button selected
s
shows a graphical representation of the d
default brilliance setting, this can bbe set from
minimum to maxim mum over 31 1 steps, usi ng the up(right arrow button)
b and down (left button).

Factoryy default value is 20.

BEEP VOLUME
Removiing the tick from the Ennabled checck box below the SYST TEM buttonn menu with the
BEEP V VOLUME bu utton selectted, will disa
able the use
ers ability to change thhe beep volume on
the targ
get monitor.

The barr that appea


ars below th
he SYSTEM M button me enu with thee BEEP VOLLUME butto on
selectedd shows a graphical
g re
epresentatio
on of the deefault beep volume
v settting, this can be set
from miinimum to maximum
m ov
ver 31 stepss, using the
e up (right arrow buttonn) and down n (left
button)..

Factoryy default is 16.


1

14
M VOLUM
ALARM ME

Removiing the tick from the En nabled checck box below the SYST TEM buttonn menu with the
ALARM M VOLUME button sele ected, will diisable the users
u ability
y to change the suspen
nd
duration
n on the tarrget monitorr.

The barr that appea


ars below th
he SYSTEM M button me enu with thee ALARM VO OLUME button
selectedd shows a graphical
g re
epresentatio
on of the de
efault alarm volume settting, this ca
an be
set from
m minimum to maximum m over 31 ssteps, using
g the up(righ
ht arrow buttton) and doown (left
button)..

Factoryy default is 16.


1

O MODE
DEMO
Removiing the tick from the En
nabled checck box below the SYST TEM buttonn menu with the
DEMOMMODE butto on selected will disable
e the users ability to pu
ut the targeet monitor in
n to
demo m
mode.

15
4.2.2 Pa
atient Menu

Removiing the tick from the En


nabled checck box below the setup p button meenu with the
PATIEN NT button se
elected, dis
sables the u
users ability
y to change the NAME /REF, BED D
NUMBE ER GROUP P and NEW PATIENT d defaults to be
b selected and restrict
ctions applie
ed, if
required
d.

CHANGE NAME
E/REF

Removiing the tick from the En


nabled checck box below the PATIENT buttonn menu, with h the
CHANGGE NAME/R REF button selected, w
will disable the users ability to chaange the pattient
name a
and referencce number ono the targeet monitor.

16
BED N
NUMBER

Removiing the tick from the En


nabled checck box below the PATIENT buttonn menu, with h the
BED NU UMBER buttton selecte ed, will disab
ble the userrs ability to change thee bed numb
ber on
the targ
get monitor.

The dro
op down sellection will enable
e you to set the default
d bed number of tthe target monitor
m
between 1 and 16..

The bed d number iss a requirem


ment of the C
CentralView
w patient monitoring syystem. All monitors
m
that are
e intended fo
or use on th
he CentralVView system
m MUST hav ve a uniquee bed number.

If 2 unitts are conne


ected with the same nu umber, this will cause one
o or both of the mon
nitors
not to cconnect or either
e monitoor intermitte
ently connecting.

17
GROUP

Removiing the tick from the En nabled checck box below the PATIENT buttonn menu, with h the
GROUP P button selected, will disable
d the users ability to change the selectted patient group
on the ttarget monittor.

The deffault patientt group can be selected


d from the dropdown
d selection
s boox with the following
f
options.

Select at po
ower on
Adult
Paediatric
Neonatal

Select a
at power onn giver the user
u the opttion to selec
ct the requirred patient ggroup. If Ad
dult,
Paediattric or neonatal is selec
cted, the op
ption screen n will not appear at booot up.

Selectinng the patie


ent group annd removingg the tick fro
om the Enabled checkbbox will fix the
t unit
to the sselected pattient group. The user w
will not be able
a to chan
nge.

Selectin
ng select at
a power on and removving the tick k from the Enabled
E cheeck box will enable
the use
er to select the
t required d patient gro
oup at powe er on, but th
hey will not be able to change
c
the patient group selected
s durring operati on. They will
w need to switch
s the m
monitor off and
a
back onn to changee the selecte
ed patient g
group.

18
NEW P
PATIENT

Removiing the tick from the En


nabled checck box below the PATIENT buttonn menu will disable
the NEW
W PATIENT T BUTTON on the targget monitor.

This willl prevent th


he user from
m selecting new patientt that would
d clear all paatient relate
ed data
as well as reset all alarms to their
t defaultt settings.

4.2.3 Re
ecorder Menu
M

Removiing the tick from the En


nabled checck box below the RECO ORDER bu tton menu, with the
RECOR RDER buttoon selected, will disable
e the users ability to ch
hange Recoorder setting
gs on
the targ
get monitor.

19
Recorrded Wave
es

Selectin
ng the Reco
order button
n will bring u
up the recorrder button menu allow
wing the deffault
recorde
er Wave1, Wave2,
W Wavve 3 and W Wave 4 to bee selected.

Removiing the tick from the En


nabled checck box prev
vents the user of the tarrget monito
or from
changin
ng this settin
ng.

Each w
wave can be
e set to Off, ECG, ECGG II (Five lea
ad patient ca
able and duual trace mu
ust be
on) RES
SP and SPOO2 can be selected
s for printing; no
o wave can be set the ssame as an nother
wave.

arm Print
HR Ala
Removiing the tick from the En
nabled checck box below the recorrder menu w with the ALA ARM
PRINT button seleected, preveents the use
er from chan
nging the alarm print seettings of th
he target
monitorr.

op down sellection box allow the de


The dro efault settin
ng to set to on or off.

Factoryy default is off.


o

20
4.2.4 EC
CG Menu

Removiing the tick from the En nabled checck box below the Set button
b menuu with the ECG
button sselected, will disable all child butto
ons on the ECG setup menu on thhe target mo
onitor.

All settings will stilll be visible to


t the user but they will not be able to, able too make cha
anges to
them.

METER
PARAM
Removiing the tick from the En
nabled checck box below the ECG button mennu with the
parame
eter button selecte,d
s wiill disable th
he Parameter BUTTON
N on the targ
rget monitorr.

This willl prevent th


he user of th
he target mo
onitor turnin
ng off the ECG parameeter.

Setting the drop do


own selectio
on box to offf will set the ECG para
ameter to offf by default.

21
LEAD

Removiing the tick from the En nabled checck box below the ECG button mennu with the LEAD
button sselected, will disable th
he Lead sel ection on th
he target mo
onitor.

The droop down se election boxx allows leadd I, II, III, aV


VL, aVR, aV VF and V too be selected as the
default lead. If aVL
L, aVR, aVF F or V are seelected as a default lea ad and a 3 lead patient cable
is conneected, the monitor
m will automaticaally select le ead II as the
e default.

GAIN
Removiing the tick from the En nabled checck box below the ECG button mennu with the GAIN
he GAIN se lection chan
button sselected, will disable th nges on the
e target monnitor.

The dro ns of 0.5, 1,, 2 and 4 to be selectedd as the default


op down sellection box allows Gain
Gain for the target monitor.

22
E
MODE

Removiing the tick from the En nabled checck box below the ECG button mennu with the MODE
button sselected, will restrict th
he user from
m making ch
hanges to th
he mode seettings on th
he target
monitorr.

The deffault is set to


t monitor: this
t cannot be set to Diagnostic
D as a default.

FILTER
Removiing the tick from the En nabled checck box below the ECG button mennu with the FILTER
button sselected, will restrict th
he user from
m making ch
hanges to th
he filter settting on the target
t
monitorr.

The deffault filter se


etting is on; this canno t be set to off
o as a defa
ault.

23
QRS B
Beep

Removiing the tick from the En nabled checck box below the ECG button mennu with the QRS
button sselected, will disable th
he QRS BUUTTON, resttricting the user
u from m
making chan
nges to
the QRS S beep statte on the target monito
or.

ng the QRS
Disablin S pulse beep
p will also d
disable the SPO
S 2 Pulse beep.

The dro
op down sellection box allows on o
or off to be selected
s as the defaultt.

Factoryy default is on.


o

1mV

Removiing the tick from the En nabled checck box below the ECG button mennu with the 1mV
button sselected, will disable th
he 1mV on tthe target monitor.
m

24
DUAL
Removiing the tick from the En nabled checck box below the ECG button mennu with the DUAL
button sselected ,will disable th
he DUAL tra
ace ability on
o the target monitor.

Factoryy Default sound is High


h sound 1.

END
SUSPE
Removiing the tick from the Ennabled checck box below the HR ALARMA SETTUP button menu
with the
e SUSPEND disable the user ability
D button selected, will d y to suspendd the HR AL
LARM
individu
ually on the target monitor.

The ECCG HR alarm


m will still be
e suspende
ed on the target monito
or by the gloobal suspen
nd
button.

All chan
nges made to the HR ALARM
A SET
TUP will be
e reflected in
n the PR ALLARM SETU
UP

25
LOW

Removiing the tick from the En


nabled checck box below the HR ALARM A SETTUP button menu
with the
e LOW buttoon selected, will disabl e the users
s ability to adjust
a the LO
OW Alarm limits
for Adult, Neonatal and Paediatric patiennt groups onn the target monitor.

ng this butto
Disablin on will also disable the High HR alarm setup button.

The selection boxees below the


e HR ALAR
RM SETUP MENU allow
w default allarm limits to
t be set
for Adult, Neonatal and Paediatric.

Factoryy defaults fo
or ADULT 50 0, PAEDIAT
TRIC 50 an
nd NEONAT
TAL 100 cann be set to
anything within thee range of 25Bpm to 29
95Bpm

Increassing the hea


art rate towa
ards the upp
per rate will force the upper
u rate too increase,
maintaining a gap of 5Bpm be etween the upper and lower
l limits.

All chan
nges made to the HR ALARM
A SET
TUP will be
e reflected in
n the PR ALLARM SETU
UP

26
HIGH

Removiing the tick from the En nabled checck box below the HR ALARM A SETTUP button menu
with thee HIGH buttton selected
d, will disab le the users ability to adjust
a the H
HIGH HR Allarm
limits fo
or adult neonatal and paediatric
p pa
atient group
ps on the target monitoor.

Disablin
ng this butto
on will also disable the LOW HR alarm
a setup button.

The selection boxees below the


e HR ALAR
RM SETUP MENU allow
w default allarm limits to
t be set
for Adult, Neonatal and Paediatric.

Factoryy defaults fo
or ADULT 12 20, PAEDIA
ATRIC 150 and NEONATAL 200 ccan be set to
t
anything within thee range of 30Bpm to 30
00Bpm

Reducinng the HR rate


r towards
s the LOW rate will force the lowe
er rate to redduce mainta
aining a
gap of 5
5Bpm betwe een the upp
per and low
wer limits.

All chan
nges made to the BR ALARM
A SET
TUP will be reflected in
n the PR ALLARM SETU
UP.

AUTOLIMIT
Removiing the tick from the En nabled checck box below the BR ALRAM
A SET TUP button menu
with the
e AUTOLIMIT button se elected, willl disable the
e user abilitty to Auto lim
mit the High and
Low alaarm limits on
n the targett monitor.

If HIGH
H and LOW Alarm
A limits
s have been
n set and diisabled, the auto limit bbutton does
s
nothing.

Change es made to the HR ALA


ARM High a
and Low lim
mits as well as
a the HR ssuspend willl be
reflecte
ed in the PR
R ALARM SE
ETUP.

27
4.2.5 RE
ESP Menu
u

Removiing the tick from the En nabled checck box below the SETU UP button m
menu with thhe
RESP b button seleccted, will dis
sable all chiild buttons on
o the RESP setup buttton menu on
o the
target m
monitor.

METER
PARAM
Removiing the tick from the En
nabled checck box below the RESP P button meenu with thee
PARAMMETER buttton selected d, disables tthe users ability
a to turn
n on/off the Respiration
n
parame
eter on the target
t monittor.

28
E
SENSE
Removiing the tick from the En nabled checck box below the RESP P button meenu with the e SENS
button sselected, will disable th
he users ab
bility to chan
nge the respiration sennsitivity on the
t
target m
monitor.

op down sellection box allow defau


The dro ults of 3/cm
m or 1/cm
m to be set.

Factoryy default is 1/cm.


1

END
SUSPE
Removiing the tick from the Ennabled checck box below the BR ALARMA SETTUP button menu
with the
e SUSPEND D button selected, will d
disable the user ability
y to suspendd the BR AL
LARM
ually on the target monitor.
individu

The RE
ESP alarm can
c still be suspended
s on the target monitor by
b the globaal suspend button

29
HIGH

Removiing the tick from the Ennabled checck box below the HR ALARM A SETTUP button menu
with thee HIGH buttton selected
d, will disab le the users ability to adjust
a the H
HIGH HR Allarm
or Adult, Neonatal and Paediatric p
limits fo patient grouups on the target
t monittor.

Disablin
ng this butto
on will also disable the LOW HR alarm
a setup button.

The selection boxees below the


e HR ALAR
RM SETUP MENU allow
w default allarm limits to
t be set
for Adult, Neonatal and Paediatric.

Factoryy defaults fo
or ADULT 12 20, PAEDIA
ATRIC 150 and NEONATAL 200 ccan be set to
t
anything within thee range of 30Bpm to 30
00Bpm

Reducinng the HR rate


r towards
s the LOW rate will force the lowe
er rate to redduce, mainttaining
a gap o
of 5Bpm bettween the upper and lo
ower limits.

30
LOW

Removiing the tick from the En


nabled checck box below the BR ALARM A SETTUP button menu
with the
e LOW buttoon selected, will disabl e the users
s ability to adjust
a the LO
OW Alarm limits
for Adult, Neonatal and Paediatric patiennt groups onn the target monitor.

ng this butto
Disablin on will also disable the High HR alarm setup button.

The selection boxees below the


e BR ALAR RM SETUP MENU allow
w default al arm limits to be set
for Adult, Neonatal and Paediatric patien
nt groups.

Factoryy defaults fo
or ADULT 5, PAEDIATR
RIC 5 and NEONATAL
N L 5 can be sset to anyth
hing
within th
he range off 4br/m to 12
25br/m

Increassing the low respiration rate toward


ds the uppe
er rate will fo
orce the uppper rate to
increase, maintaining a gap ofo 5br/m betwween the upper and lo ower limits.

31
AUTOLIMIT

Removiing the tick from the En nabled checck box below the BR ALRAM
A SET TUP button menu
with the
e AUTOLIMIT button se elected, willl disable the
e user abilitty to Auto lim
mit the High and
Low alaarm limits on
n the targett monitor.

If HIGH
H and LOW Alarm
A limits
s have been
n set and diisabled the auto limit bbutton does
nothing.

4.2.6 SP
PO2 Menu

Removiing the tick from the En nabled checck box below the SETU UP button mmenu with th
he
SPO2 b button seleccted, will disable the usser ability to make chan
nges to the SPO2 SETU UP on
the targ
get monitor.

32
METER
PARAM
Removiing the tick from the En
nabled checck box below the SPO2 2 button meenu with the
e
PARAMMETER buttton selected d, will disab le the user ability to turn on and ooff the SPO2
Parame
eter on the target
t monitor.

E BEEP
PULSE
Removiing the tick from the En
nabled checck box below the SPO2 2 button meenu with the
e
PULSE BEEP buttton selected d, will disab le the user ability to turn on and ooff the SPO2
PULSE BEEP on the t target monitor
m

ng the SPO
Disablin O2Pulse beep will also t urn off the ECG
E Pulse beep.

The pullse beep is normally EC


CG derived O2
d unless there is no ECG signal theen it is SPO
Derived
d

33
USPEND
PR SU
Removiing the tick from the Ennabled checck box below the SPO2 2 SETUP bbutton menu
u with
the PR SUSPEND button sele ected, will d
disable the user
u ability to
t suspend the PR ALAARM
individu
ually on the target monitor.

R alarm can still be suspended on the target monitor


The PR m by the
t global ssuspend buttton.

SPO2 P
PR and ECG
G HR suspe
ends are lin
nked.

GH
PR HIG
Removiing the tick from the En
nabled checck box below the PR ALARM A SETTUP button menu
with the
e HIGH buttton selected
d, will disab le the users ability to adjust
a the H
HIGH Alarm
m limits
for Adul, Neonatal and Paediaatric patientt groups on the target monitor.
m

ng this butto
Disablin on will also disable the LOW alarm
m setup buttton.

The selection boxees below the


e PR ALAR w default al arm limits to be set
RM SETUP MENU allow
for Adult, Neonatal and Paediatric.

Factoryy defaults fo
or ADULT 12 20, PAEDIA
ATRIC 150 and NEONATAL 200 ccan be set to
t
anything within thee range of 30Bpm and 300Bpm.

Decreasing the PR
R rate towarrds the loweer rate, will force
f it to decrease, m
maintaining a gap of
ween the upper and lo
5Br betw ower limits.

34
OW
PR LO
Removiing the tick from the En
nabled checck box below the PR ALARM A SETTUP button menu
with the
e LOW buttoon selected, will disabl e the users
s ability to adjust
a the LO
OW Alarm limits
for Adult, Neonatal and Paediatric patiennt groups onn the target monitor.

ng this butto
Disablin on will also disable the High alarm
m setup button.

The selection boxees below the


e PR ALAR
RM SETUP MENU allow
w default al arm limits to be set
for Adult, Neonatal and Paediatric.

Factoryy defaults fo
or ADULT 50 0, PAEDIAT
TRIC 50 an
nd NEONAT
TAL 100 cann be set to
anything within thee range of 25Bpm to 29
95Bpm.

Increassing the hea


art rate towa
ards the upp
per rate, willl force the upper
u rate tto increase,,
maintaining a gap of 5Bpm be etween the upper and lower
l limits.

%O2 S
SUSPEND
D

Removiing the tick from the Ennabled checck box below the PR ALARMA SETTUP button menu
with the
e SUSPEND D button selected, will d
disable the user ability
y to suspendd the PR AL
LARM
individu
ually on the target monitor.

CG alarm ca
The EC an still be su
uspended o y the global suspend button.
on the targett monitor by

35
GH
O2 HIG
Removiing the tick from the En nabled checck box below the O2 SE ETUP buttoon menu witth the
HIGH b
button seleccted, will dis
sable the ussers ability to
t adjust the
e HIGH Alaarm limits for Adult,
Neonatal and Paed diatric patie
ent groups oon the targe et monitor.

ng this butto
Disablin on will also disable the LOW alarm
m setup buttton.

The selection boxe


es below the
e O2 SETUP
P MENU allow default alarm limitss to be set for
f
Adult, N
Neonatal an
nd Paediatric.

Factoryy defaults fo
or ADULT 10 00, PAEDIAATRIC 100 and NEONATAL 98 caan be set to
o
anything within thee range of 52%
5 to 100%
%.

ds the Low rate, will force it to dec


Decreasing the O2 rate toward crease, to m
maintain a gap
g of
ween the up
2% betw pper and lower limits.

36
OW
O2 LO
Removiing the tick from the Ennabled checck box below the SPO2 SETUP buutton menu, with
the LOWW button seelected, will disable the
e users abillity to adjustt the LOW A
Alarm limits
s for
Adult, N
Neonatal an
nd Paediatric patient grroups on the e target monitor.

Disablin
ng this butto
on will also disable the High alarm
m setup button.

The selection boxe


es below the
e O2 SETUP
P MENU allow default alarm limitss to be set for
f
Adult, N
Neonatal an
nd Paediatric.

Factoryy defaults fo
or ADULT 10 00, PAEDIAATRIC 100 and NEONATAL98 caan be set to
anything within thee range of 52%
5 to 100%
%.

Increassing the Low


w rate alarm
m towards th e the upper rate to increase,
he upper ratte, will force
maintaining a gap 2% betwee en the uppe r and lowerr limits.

ng PR alarm
Disablin m setup will also disablle O2 Alarm setup on th
he target moonitor.

37
AUTOLIMIT

Removiing the tick from the En nabled checck box below the PR ALRAM
A SET TUP button menu
with the
e AUTOLIMIT button se elected, willl disable the
e user abilitty to Auto lim
mit the High and
Low alaarm limits on
n the targett monitor.

If HIGH
H and LOW Alarm
A limits
s have been
n set and diisabled, the auto limit bbutton does
s
nothing.

es to the PR
Change R alarm setu
up will be re
eflected in the HR alarm
m setup.

H and LOW Alarm


If HIGH A limits n set and diisabled, the auto limit bbutton does
s have been s
nothing.

4.2.7 TE
EMP Menu
u

Removiing the tick from the En nabled checck box below the SETUUP button m
menu with th
he
TEMP b button seleccted, will dis
sable all ch ild buttons on
o TEMP T1
T and T2 seetup menu on the
target m
monitor.

38
METER
PARAM
Removiing the tick from the En
nabled checck box below the TEMP P button meenu with the
e
PARAMMETER buttton selected d, will disab le the user ability to ma
ake changees to turn on
n/off the
tempera
ature parammeter on thee target mon nitor.

op down sellection box allows settiings of on or


The dro o off to be selected
s as a default.

Factoryy default is on.


o

T1 SUSPEND

Removiing the tick from the Ennabled checck box below the T1 AL LARM SET TUP button menu
m
with the
e SUSPEND disable the user ability
D button selected, will d y to suspendd the T1 AL
LARM
ually on the target monitor.
individu

The T1 alarm can still be susp


pended on tthe target monitor
m by th
he global suuspend buttton.

39
GH
T1 HIG
Removiing the tick from the ch heck box beelow the T1 ALARM SE ETUP buttonn menu with the
HIGH b
button seleccted will disaable the use
ers ability to
o adjust the
e HIGH Alarrm limits forr adult
neonata
al and paed diatric patien
nt groups o n the targett monitor.

Disablin
ng this butto
on will also disable the LOW alarm
m setup buttton.

The selection boxees below the


e T1 ALARM
M SETUP MENU
M allow
w default alaarm limits to
o be set
for Adult, Neonatal and Paediatric.

Factoryy defaults fo
or ADULT 400, PAEDIAT
TRIC 40 an
nd NEONAT
TAL 40 can be set to an
nything
within th
he range off 21C and 45C.
4

Decreasing the T1 alarm limit towards th e lower alarm limit, decreases it m


maintaining a gap
of 1C b
between the
e upper andd lower limitts.

40
W
T1 LOW
Removiing the tick from the En nabled checck box below the T1 AL LARM SET TUP button menu
m
with the
e LOW butto on selected, will disabl e the users
s ability to adjust
a the LO
OW Alarm limits
for adullt neonatal and
a paediattric patient g groups on the
t target monitor.
m

Disablin
ng this butto
on will also disable the High alarm
m setup button.

The selection boxees below the


e T1 ALARM M SETUP MENU
M allow
w default alaarm limits to
o be set
for Adult, Neonatal and Paediatric patien
nt groups.

Factoryy defaults fo
or ADULT 35 ATRIC 35.0
5.0, PAEDIA 0 and NEON
NATAL 35.00 can be se
et to
anything within thee range of 20C to 44C
C.

Increassing the LOW


W temperatture alarm liimit towards
s the upper limit, will foorce the upp
per rate
to incre
ease, mainta
aining a gap
p of 1C bettween the upper
u and lo
ower limits.

ARM SET
T2 ALA TUP
As per T
T1 alarm se
etup.

41
AUTOLIMIT

Removiing the tick from the En nabled checck box below the T1 AL LRAM SET TUP button menu
m
with the
e AUTOLIMIT button se elected, willl disable the
e users ability to Auto limit the High and
Low alaarm limits on
n the targett monitor.

If HIGH
H and LOW Alarm
A limits
s have been
n set and diisabled, the auto limit bbutton does
s
nothing.

4.2.8 IB
BP1 Menu

Removiing the tick from the En nabled checck box below the SETU UP button m
menu with thhe IBP1
button sselected, will disable all child butto
ons on the IBP1 setup button mennu on the ta
arget
monitorr.

42
METER
PARAM
Removiing the tick from the En
nabled checck box below the IBP1 button mennu with the
PARAM METER buttton selected d, will disab le all child buttons
b on the
t IBP1 seetup button menu
on the ttarget monittor.

ENABLED
SYS E
nabled checck box below the IBP1 button mennu with the SYS
Removiing the tick from the En
ENABL LED button selected,
s disables the users abilitty to turn on
n/off the parrameter on the
target m
monitor.

op down sellection box allows the p


The dro parameter to
t be set to off.

Factoryy default is on.


o

43
SYS H
HIGH

Removiing the tick from the En nabled checck box below the IBP1 button mennu with the SYS
HIGH b button seleccted, will dis
sable the ussers ability to
t adjust the
e SYS HIGH
H Alarm lim
mits for
adult ne
eonatal and d paediatric patient gro ups on the target moniitor.

Disablin
ng this butto
on will also disable the SYS LOW alarm setup button.

The selection boxees below the


e SYS ALA ARM SETUP P MENU allo ow default aalarm limits to be
set for A
Adult, Neon
natal and Pa
aediatric pa
atient groups
s in the range of -25 too 300mmHg g.

Factoryy defaults arre as follows:-

ADULT 220
0mmHg
PAEDIATR
RIC 145mmH
Hg
NEONATAL 110mmHg

Decreasing SYS HIGH


H alarm limit toward
ds the SYS LOW alarm
m limit will foorce the SY
YS LOW
to decre
ease mainta
aining a gap
p of 5mmHg g between the
t upper and lower lim mits.

44
SYS S
SUSPEND

Removiing the tick from the En


nabled checck box below the IBP1 button mennu with the SYS
SUSPE END button selected, will
w disable t he users ability to suspend the syys alarm aftter the
monitor has been updated.
target m

SYS LOW
Removiing the tick from the En nabled checck box below the IBP1 button mennu with the SYS
LOW bu utton selectted will disa
able the use
ers ability to
o adjust the SYS LOW Alarm limits for
adult ne d paediatric patient gro ups on the target moniitor.
eonatal and

Disablin
ng this butto
on will also disable the SYS HIGH
H alarm setu
up button.

The selection boxe


es below the
e IBP1 butto on menu allow default alarm limitss to be set for
f
Adult, N
Neonatal an
nd Paediatric patient grroups in the
e range of -3
30 to295mmmHg.

Factoryy defaults arre as follows:-

ADULT 75m
mmHg
PAEDIATR
RIC 75mmHg
NEONATAL 50mmHg

Increassing the SYS S Low alarm S HIGH limiit will force tthe SYS HIGH
m limit towa rds the SYS
alarm limit to increase maintaining a gap of 5mmHg between th he upper annd lower lim mits.

45
NABLED
DIA EN
Removiing the tick from the En
nabled checck box below the IBP1 button mennu with the DIA
ENABL LED button selected,
s will disable th
he users ab
bility to turn on/off the D
DIA Alarm after
a the
target m
monitor has been updated.

Factoryy default is ON.


O

DIA HIIGH

Removiing the tick from the En nabled checck box below the IBP1 button mennu with the DIA
HIGH b button seleccted will disa
able the use
ers ability to e DIA HIGH Alarm limitts for
o adjust the
adult ne
eonatal and d paediatric patient gro ups on the target moniitor.

Disablin on will also disable the DIA LOW alarm


ng this butto a setup
p button.

The selection boxees below the


e DIA ALAR RM SETUP MENU allo ow default aalarm limits to be
set for A
Adult, Neon
natal and Pa
aediatric pa
atient groups
s in the range of -25 too 300mmHg g.

Factoryy defaults arre as follows:-

ADULT 110
0mmHg
PAEDIATR
RIC 100mmH
Hg
NEONATAL 70mmHg

Decreasing DIA HIIGH alarm limit toward s the DIA LOW


L alarm limit will forcce the DIA LOW to
decreasse maintaining a gap of
o 5mmHg b between the e upper and lower limitss.

46
USPEND
DIA SU
Removiing the tick from the En
nabled checck box below the IBP1 button mennu with the DIA
SUSPE END button selected, will
w disable t he users ability to suspend the D
DIA alarm affter the
monitor has been updated.
target m

OW
DIA LO
Removiing the tick from the En nabled checck box below the IBP1 button mennu with the DIA
LOW bu utton selectted, will disa
able the use
ers ability to adjust the
e DIA LOW Alarm limits
s for
Adult, N
Neonatal an
nd Paediatric patient grroups on the e target monitor.

Disablin
ng this butto
on will also disable the DIA HIGH alarm setup
p button.

The selection boxe


es below the
e IBP1 butto on menu allow default alarm limitss to be set for
f
Adult, N
Neonatal an
nd Paediatric patient grroups in the
e range of -3
30 to 295mm mHg.

Factoryy defaults arre as follows:-

ADULT 35m
mmHg
PAEDIATR
RIC 35mmHg
NEONATAL 30mmHg

Increassing the DIAA Low alarm


m limit towarrds the DIA HIGH limit, will force thhe DIA HIG
GH alarm
limit to increase, maintaining
m a gap of 5m
mmHg betwe een the uppper and low wer limits.

47
MEAN ENABLED

Removiing the tick from the Ennabled checck box below the IBP1 button mennu with the MEAN
ENABL LED button selected,
s disables the users abilitty to turn on
n/off the ME
EAN alarm on
o the
target m
monitor after update.

MEAN HIGH
Removiing the tick from the En nabled checck box below the IBP1 button mennu with the MEAN
HIGH b button seleccted, will dis
sable the ussers ability to
t adjust the
e MEAN HI GH Alarm limits for
Adult, N
Neonatal an nd Paediatric patient grroups on the e target monitor.

Disablin
ng this butto
on will also disable the MEAN LOW
W alarm setup button.

The selection boxees below the


e MEAN AL LARM SETU UP MENU allow
a defaullt alarm limits to be
set for A
Adult, Neon
natal and Pa
aediatric pa
atient groups
s in the range of -25 too 300mmHg g.

Factoryy defaults arre as follows:-

ADULT 120
0mmHg
PAEDIATR
RIC 110mmH
Hg
NEONATAL 80mmHg

Decreasing MEAN
N HIGH alarm limit towa ards the ME
EAN LOW alarm
a limit w
will force the
e MEAN
LOW to
o decrease maintaining
g a gap of 5 mmHg betwween the up
pper and lowwer limits.

48
MEAN SUSPEND

Removiing the tick from the En


nabled checck box below the IBP1 button mennu with the MEAN
SUSPE END button selected, will
w disable t he users ability to suspend the M
MEAN alarm
m after
get monitor has been updated.
the targ

MEAN LOW
Removiing the tick from the En nabled checck box below the IBP1 button mennu with the MEAN
LOW bu utton selectted, will disa
able the use
ers ability to adjust the
e MEAN LO
OW Alarm lim
mits for
Adult, N
Neonatal an
nd Paediatric patient grroups on the e target monitor.

Disablin
ng this butto
on will also disable the MEAN HIG
GH alarm se
etup button..

The selection boxe


es below the
e IBP1 butto on menu allow default alarm limitss to be set for
f
Adult, N
Neonatal an
nd Paediatric patient grroups in the
e range of -3
30 to295mmmHg.

Factoryy defaults arre as follows:-

ADULT 50m
mmHg
RIC 50mmHg
PAEDIATR
NEONATAL 35mmHg

Increassing the MEA AN Low alaarm limit tow


wards the MEAN
M HIGHH limit will foorce the MEAN
HIGH a alarm limit to
o increase, maintaining
g a gap of 5mmHg
5 betw
ween the uppper and low wer
limits.

49
AUTOLIMIT

Removiing the tick from the En nabled checckbox below w the IBP1 button mennu with the Auto
A
limit buttton selecte
ed, will disab
ble the userrs ability to auto limit the SYS, MA
AP and DIA
A alarms
after the
e target mo onitor has beeen updated d.

50
4.2.9 IB
BP2 Menu

Removiing the tick from the En nabled checck box below the SETU UP button m
menu with thhe IBP2
button sselected, will disable all child butto
ons on the IBP2 setup button mennu on the ta
arget
monitorr.

P1 for exam
See IBP mples

SYS HIGH Range -4.9 to 99.9


9mmHg

OW Range -9.9
SYS LO - to 94.9
9mmHg

SYS High Default alarm


a settin
ngs, Adult 5
50, Paediatrric 50 and Neonatal
N 50 mmHg

ow Default alarm
SYS Lo a settings Adult, Pa
aediatric an
nd neonatal 15mmHg.

DIA HIG
GH Range -4.9
- to 99.9mmHg

DIA LO
OW Range-9
9.9 to 94.9m
mmHg

gh Default alarm
DIA Hig a setting
gs, Adult 20
0, Paediatric
c 20 and Ne
eonatal 20m
mmHg

DIA Low
w Default alarm setting
gs Adult, Pa
aediatric and
d Neonatal 5mmHg.

MEAN HIGH Rang


ge -4.9 to 99
9.9mmHg

MEAN LOW Range -9.9 to 94


4.9

MEAN High Default alarm setttings, Adultt 25, Paedia


atric 25 and Neonatal 225mmHg

MEAN Low Default alarm setttings Adult, Paediatric and neonattal 10mmHgg.

51
4.2.10 NIBP Menu
M

Removiing the tick from the En nabled checck box below the SETU UP button mmenu with thhe NIBP
button sselected, will disable th
he users ab bility to mak
ke changes to the NIBP
P settings on
o the
target m
monitor, all settings
s willl remain vissible.

E
MODE
Removiing the tick from the En nabled checck box below the NIBPP button mennu with the MODE
button sselected, will disable th
he users ab
bility to set the
t NIBP mode to Autoomatic or Tu
urbo
form ma anual on the
e target mo onitor.

52
E
CYCLE
Removiing the tick from the En nabled checck box below the NIBPP button mennu with the CYCLE
button sselected, will disable th
he users ab
bility to set the
t NIBP au
utomatic cyccle time on the
target m
monitor.

The droop down sellection box allows the d


default NIBP automatic
c cycle timee to be set to 2, 3,
4, 5, 10
0, 15, 30, 60
0 or 90 minu
utes.

The facctory defaultt is 5 minute


es.

T PRESSU
START URE
Removiing the tick from the Ennabled checck box below the NIBP P button mennu with the START
PRESS SURE button n selected, will disable
e the user ab
bility to mak
ke changess to the NIBP
P start
pressurres on the ta
arget monitor.

The dro
op down sellection boxe
es allow the
e defaults to
o be selecte
ed for ADULLT, PAEDIA
ATRIC
and NE
EONATAL patient
p group
ps.

Factoryy defaults arre Adult 160


0mmHg, Pa
aediatric 120
0mmHg and
d Neonatal 80mmHg

Adult an
nd Paediatrric can be set to a startt pressures of 80mmHg
g, 100mmH
Hg, 120mmH
Hg,
140mm mHg, 160mmmhg, 180mm mhg, 200mm mhg, 220mm mhg and 24
40mmhg.

Neonatal can be se
et to a startt pressure o
of 60mmHg, 80mmHg, 100mmHg,, 120mmHg
g

53
LE CALIB
ENABL BRATION

Removiing the tick from the En


nabled checck box below the NIBP P button mennu with the
ENABL LE CALIBRA ATION MOD DE button sselected, will disable the users abbility to acce
ess the
calibration mode on
o the targett monitor.

MS
ALARM
Removiing the tick from the Ennabled checck box below the NIBP P button mennu with the
ALARM
MS button se elected, willl disable the
e user abilitty to make changes
c to the NIBP ALARM
A
SETUP
P on the targ get monitor.. All settingss will remainn visible to the user.

54
ENABLED
SYS E

Removiing the tick from the Ennabled checck box below the SYS ALARM SE ETUP button n menu
with the
e ENABLED D button selected, will d
disable the users abilitty enable /ddisable the SYS
S
alarm oon the target monitor.

The dro
op down sellection box allows the ssys alarm to
o be set to off
o

Factoryy default is on.


o

SYS H
HIGH
Removiing the tick from the En
nabled checck box below the SYS ALARM SE ETUP button
n menu
with the
e HIGH buttton selected
d, will disab le the users ability to adjust
a the H
HIGH Alarm
m limits
for adullt neonatal and
a paediattric patient g
groups on the
t target monitor.
m

Disablin
ng this butto
on will also disable the LOW alarm
m setup buttton.

The selection boxees below the


e SYS ALA ARM SETUP ow default aalarm limits to be
P MENU allo
set for A
Adult, Neon
natal and Pa
aediatric.

Factoryy defaults fo
or ADULT 22 20, PAEDIA
ATRIC 145 and NEONATAL 100 ccan be set tot
anything within thee range of 65mmHg annd 250mmHg for adult, Paediatric 65 to165mm
mHg,
45mmH Hg and 120 mmHg for Neonatal.
N

Decreasing the SY
YS High alarm limit tow
wards the SY
YS LOW ala
arm limit deecreases the
e SYS
LOW allarm, mainta
aining a gap of 5mmHg g between the
t upper and
a lower lim mits.

55
SYS S
SUSPEND

Removiing the tick from the Ennabled checck box below the SYS ALARM SE ETUP buttonn menu
with the
e SUSPEND D button selected, will d y to suspendd the SYS ALARM
disable the user ability A
ually on the target monitor.
individu

The SY
YS alarm can still be su
uspended on
n the targett monitor by
y the global suspend bu
utton.

SYS LOW
Removiing the tick from the En
nabled checck box below the SYS ALARM SE ETUP button
n menu
with the
e LOW buttoon selected, will disabl e the users
s ability to adjust
a the LO
OW Alarm limits
for Adult, Neonatal and Paediatric patiennt groups onn the target monitor.

ng this butto
Disablin on will also disable the High alarm
m setup button.

The selection boxees below the


e SYS ALA ARM SETUP P MENU allo
ow default aalarm limits to be
set for A
Adult, Neon
natal and Pa
aediatric pa
atient groups
s.

Factoryy defaults fo
or ADULT 755, PAEDIAT
TRIC 75 annd NEONAT
TAL 50 can be set to an
nything
within th
he range off 60mmHg to
t 245mmH g for adult and
a paediattric, 40mmH
Hg and 115mmHg
for neonnatal.

Increassing the LOW


W sys alarm
m limit towarrds the upp
per limit will force the uppper rate to
o
increase, maintaining a gap of
o 5mmHg b between the e upper and lower limitss.

56
DIA ALARM SETUP

Removing the tick from the Enabled check box below the NIBP button menu with the DIA
ALARM SETUP button selected, will disable the user ability to make changes to the DIA
ALARM SETUP on the target monitor.

For example see SYS alarm.

DIA ENABLED

Removing the tick from the Enabled check box below the DIA ALARM SETUP button menu
with the ENABLED button selected, will disable the users ability enable /disable the DIA
alarm on the target monitor.

The drop down selection box allows the sys alarm to be set to off.

Factory default is on.

For example see SYS alarm

DIA HIGH

Removing the tick from the Enabled check box below the DIA ALARM SETUP button menu
with the HIGH button selected, will disable the users ability to adjust the HIGH Alarm limits
for Adult, Neonatal and Paediatric patient groups on the target monitor.

Disabling this button will also disable the LOW alarm setup button.

The selection boxes below the DIA ALARM SETUP MENU allow default alarm limits to be
set for Adult, Neonatal and Paediatric.

Factory defaults for ADULT 200, PAEDIATRIC 130 and NEONATAL 70 can be set to
anything within the range of 45mmHg and 250mmHg for adult, 45mmHg and 130 mmHg for
paediatric, 25mmHg and 90 mmHg for Neonatal.

Decreasing the DIA alarm limit towards the lower alarm limit, decreases it maintaining a gap
of 5mmHg between the upper and lower limits.

For example see SYS alarm.

DIA SUSPEND

Removing the tick from the Enabled check box below the DIA ALARM SETUP button menu
with the SUSPEND button selected, will disable the user ability to suspend the DIA ALARM
individually on the target monitor.

The DIA alarm can still be suspended on the target monitor by the global suspend button.

For example see SYS alarm.

57
DIA LOW

Removing the tick from the Enabled check box below the DIA ALARM SETUP button menu
with the LOW button selected, will disable the users ability to adjust the LOW Alarm limits
for Adult, Neonatal and Paediatric patient groups on the target monitor.

Disabling this button will also disable the High alarm setup button.

The selection boxes below the DIA ALARM SETUP MENU allow default alarm limits to be
set for Adult, Neonatal and Paediatric patient groups.

Factory defaults for ADULT 50, PAEDIATRIC 50 and NEONATAL 30 can be set to anything
within the range of 40mmHg to 195mmHg for adult , 40mmHg to 125 mmHg for paediatric
and 40mmHg to 115mmHg for neonatal.

Increasing the LOW DIA alarm limit towards the upper limit will force the upper rate to
increase maintaining a gap of 5mmHg between the upper and lower limits.

For example see SYS alarm.

MAP ALARM SETUP


Removing the tick from the Enabled check box below the NIBP button menu with the MAP
ALARM SETUP button selected, will disable the user ability to make changes to the MAP
ALARM SETUP on the target monitor.

For example see SYS alarm.

ENABLE
Removing the tick from the Enabled check box below the MAP ALARM SETUP button menu
with the ENABLED button selected, will disable the users ability enable /disable the MAP
alarm on the target monitor.

The drop down selection box allows the sys alarm to be set to off.

Factory default is on.

For example see SYS alarm.

58
LOW

Removing the tick from the Enabled check box below the MAP ALARM SETUP button menu
with the LOW button selected, will disable the users ability to adjust the LOW Alarm limits
for adult neonatal and paediatric patient groups on the target monitor.

Disabling this button will also disable the High alarm setup button.

The selection boxes below the MAP ALARM SETUP MENU allow default alarm limits to be
set for Adult, Neonatal and Paediatric patient groups.

Factory defaults for ADULT 60, PAEDIATRIC 60 and NEONATAL 40 can be set to anything
within the range of 45mmHg to 230mmHg for adult, 45mmHg to 1435mmHg for paediatric
and 30mmHg to 95mmHg for neonatal.

Increasing the LOW MAP alarm limit towards the upper limit will force the upper rate to
increase, maintaining a gap of 5mmHg between the upper and lower limits.

For example see SYS alarm

SUSPEND
Removing the tick from the Enabled check box below the MAP ALARM SETUP button menu
with the SUSPEND button selected, will disable the user ability to suspend the MAP ALARM
individually on the target monitor.

The MAP alarm can still be suspended on the target monitor by the global suspend button.

For example see SYS alarm.

HIGH
Removing the tick from the Enabled check box below the MAP ALARM SETUP button menu
with the HIGH button selected, will disable the users ability to adjust the HIGH Alarm limits
for Adult, Neonatal and Paediatric patient groups on the target monitor.

Disabling this button will also disable the LOW alarm setup button.

The selection boxes below the MAP ALARM SETUP MENU allow default alarm limits to be
set for Adult, Neonatal and Paediatric.

Factory defaults for ADULT 120, PAEDIATRIC 110 and NEONATAL 80 can be set to
anything within the range of 50mmHg and 235mmHg for adult, 50mmHg and 140 mmHg for
paediatric, 35mmHg and 100 mmHg for Neonatal.

Decreasing the MAP alarm limit towards the lower alarm limit, decreases it maintaining a
gap of 5mmHg between the upper and lower limits.

For example see SYS alarm.

59
AUTOLIMIT

Removiing the tick from the En nabled checck box below the NIBP P ALARM SE ETUP butto on menu
with the
e AUTOLIMIT button se elected, willl disable the
e users ability to Auto limit the High and
Low alaarm limits on
n the targett monitor.

If HIGH
H and LOW Alarm
A limits
s have been
n set and diisabled, the auto limit bbutton does
s
nothing.

4.2.11 CO2 Menu

Removiing the tick form the En nabled checck box below the SETU UP button m
menu with th
he CO2
button sselected, will disable all child butto
ons on the CO2
C setup menu.

ERO button will remain functional.


The ZE

60
METER
PARAM
Removiing the tick from the En
nabled checck box below the CO2 button mennu with the
PARAM METER buttton selected d, will disab le all child buttons
b on the
t CO2 seetup button menu
m
on the ttarget monittor.

ENT PRES
AMBIE SSURE

Removiing the tick from the En


nabled checck box below the CO2 setup buttoon menu witth the
AMBIEN NT PRESSURE button n selected, w
will preventt the user ad
djusting thee ambient pressure
setting for the CO2
2 parameterr.

The selection box allows the setting


s of th
he ambient pressure
p in the range oof 400 to
850mmmHg.

61
PENSATIO
COMP ON

Removiing the tick from the En


nabled checck box below the CO2 button mennu with the
COMPEENSATION button sele ected, will d
disable all ch
hild buttons on the Com
mpensation
n menu.

O2

Removiing the tick from the En nabled checckbox below w the O2 co


ompensationn button me
enu with
the O2 button seleected, will disable the u
users ability
y to change the O2 com
mpensation on the
target m
monitor after update.

The selection box allow the O2


O compenssation to be set anywhe
ere in the raange of 0.0 to
100%.

Factoryy default is 16%.


1

62
BALAN
NCE GAS

Removiing the tick from the En


nabled checckbox below w the O2 coompensationn button me enu with
the BAL
LANCE GAS S button seelected, will disable the
e users ability to changge the selec
cted
balance
e gas on thee target monitor after u
update.

The dro
op down sellection box allows the b
balance gas
s to be set to
t the follow
wing:-

NO2
AIR
Helium

Factoryy default is Air.


A

ANAES
STHETIC

Removiing the tick from the En


nabled checckbox below w the O2 coompensationn button me enu with
the ANE
EAESTHET TIC button selected,
s wi ll disable th
he users ab
bility to channge the sele
ected
balance
e gas on thee target monitor after u
update.

The selection box below the O2


O Compen nsation butto
on menu, allows the seetting of the
e
Anaesth
hetic compeensation annywhere in tthe range off 0.0 to 20.0
0.

63
2 UNITS
ETCO2
Removiing the tick from the Ennabled checck box below the CO2 button mennu, will disable the
users a
ability to cha
ange the CO
O2 displaye
ed units on the
t target monitor
m afterr update.

The droop down sellection box allows the ffollowing un


nits of meas
surement too be used to
o display
the leve
el of CO2:-

%
mmHg
kPa

Facctory defaultt setting is mmHg.


m

64
GH
RR HIG
Removiing the tick from the ch heck box be elow the COO2 button menu with th e RR HIGH H button
selected
d will disable the userss ability to a
adjust the adjust
a the RR Alarm lim
mits for Adullt
Neonatal and Paed diatric patie
ent groups o on the targe
et monitor.

ng this butto
Disablin on will also disable the LOW HR alarm
a setup button.

The selection boxe


es below the
e CO2 SET
TUP MENU allow defau
ult alarm lim
mits to be se
et for
Adult, N
Neonatal an
nd Paediatric.

Factoryy defaults fo
or ADULT 30 0, PAEDIAT
TRIC 40 an
nd NEONAT
TAL 50 can be set to an
nything
within th
he range off 9 to 125r/m
m

Reducinng the HIGH


H RR rate to
owards the LOW RR rate will forc
ce the lowerr rate to reduce,
maintaining a gap of 5Bpm be
etween the upper and lower
l limits.

65
OW
RR LO
Removiing the tick from the Ennabled checck box below the CO2 SETUP buttton menu with w the
RR LOW W button seelected, will disable the
e users abillity to adjust the LOW A
Alarm limits
s for
Adult, N
Neonatal an
nd Paediatric patient grroups on the e target monitor.

Disablin
ng this butto
on will also disable the High RR alarm setup button.

The selection boxe


es below the
e ETCO2 S SETUP MEN
NU allow de
efault alarm limits to be
e set for
Adult, N
Neonatal an
nd Paediatric patient grroups.

Factoryy defaults fo
or ADULT 5, PAEDIATR
RIC 5 and NEONATAL
N L 5 can be sset to anyth
hing
within th
he range off 4br/m to 12
25br/m

Increassing the LOW


W RR rate towards
t the
e HIGH RR rate will force the uppeer rate to inc
crease,
maintaining a gap of 5br/m be
etween the upper and lower
l limits.

END
SUSPE
nabled checck box below the CO2 button mennu with the
Removiing the tick from the En
SUSPE w disable t he users ability to suspend the ET
END button selected, will m on the
TCO2 alarm
target m
monitor after update.

d using the global susp


Alarms can still be suspended pend button on the botttom of the screen.
s

66
2 HIGH
ETCO2
Removiing the tick from the Ennabled checck box below the CO2 setup buttoon menu witth the
ETCO2 2 HIGH buttoon selected
d, will disablle the users
s ability to adjust
a the H
HIGH ETCO
O2 Alarm
limits fo
or Adult, Neonatal and Paediatric p patient grou
ups on the target
t monittor.

Disablin
ng this butto
on will also disable the ETCO2 LO
OW alarm setup buttonn.

The selection boxees below the


e CO2 SET TUP MENU allow defauult alarm lim
mits to be se
et for
Adult, P
Paediatric and Neonataal in the ran
nge of 15 to 99 mmHg.

Factoryy default for all three pa


atient group
ps is 60mmH
Hg.

Reducinng ETCO2 rate toward


ds the LOW rate will forrce the ETC
CO2 low alaarm limit to reduce,
r
maintaining a gap of 15mmHg
g between tthe upper and lower limmits.

67
2 LOW
ETCO2
Removiing the tick from the En
nabled checck box below the CO2 SETUP buttton menu with w the
ETCO2 2 LOW buttoon selected, will disable
e the users
s ability to adjust the LO
OW Alarm limits for
Adult, N
Neonatal an
nd Paediatric patient grroups on thee target monitor.

Disablin
ng this butto
on will also disable the High ETCO
O2 alarm se
etup button..

The selection boxe


es below the
e ETCO2 S SETUP MEN
NU allow de
efault alarm limits to be
e set for
Adult, N
Neonatal an
nd Paediatric patient grroups.

Factoryy default for all three pa


atient group
ps is 25mmH
Hg.

Increassing the ETC


CO2 LOW rate
r towardss the ETCO
O2 HIGH ratte will force the upper rate
r to
increase, maintaining a gap of
o 15mmHg between th he upper and lower limiits.

AUTOLIMIT

Removiing the tick from the En nabled checckbox beloww the CO2 setup
s buttonn menu, willl
disable the users ability
a to Au
uto limit the CO2 and RR
R alarm lim
mits after thee target mo
onitor
has beeen updated..

68
4.2.12 DEFAU
ULTS Men
nu

Removiing the tick from the En nabled checck box below the setupp menu, willl disable all child
buttonss on the Deffault setup menu
m after tthe target monitor
m has been updaated.

This willl prevent th


he user sele
ecting defau
ult alarm lim
mits for the ECG,
E SPO22 and Respiration
parameeters.

4.2.13 ALARM
M SETUP Menu

Removiing the tick from the En


nabled checck box below the SETU UP button mmenu with th
he
ALARM
M SETUP bu utton selected, will disa
able all child
d buttons on
n the alarm setup butto
on
menu o
on the target monitor.

69
ECG A
ASYSTOLE
E

Removiing the tick from the En nabled checckbox below


w the ALARRM SETUP bbutton men
nu, will
disable the users ability
a to change the E CG Asystolle alarm sou
und.

op down sellection box allows the d


The dro default alarm sound off High soundd 1, High so
ound 2,
Mediumm sound 1 and
a Medium m sound 2 too be selecteed for the EC
CG ASYST TOLE ALAR RM

Factoryy Default sound is High


h sound 1.

ECG H
HR LOW
Removiing the tick from the En nabled checckbox below
w the ALAR
RM SETUP bbutton men
nu, will
disable the users ability
a to change the E CG HR LOW W alarm so
ound.

op down sellection box allows the d


The dro default alarm sound off High soundd 1, High so
ound 2,
Mediumm sound 1 and
a Medium m sound 2 too be selecteed for the EC
CG HR LOW W ALARM.

Default sound is High sound 2.


2

ample see ECG


For exa E AYSTO
OLE.

ECG H
HR HIGH
Removiing the tick from the En nabled checckbox below RM SETUP bbutton men
w the ALAR nu, will
disable the users ability
a to change the E CG HR HIG GH alarm so
ound.

op down sellection box allows the d


The dro default alarm sound off High soundd 1, High so
ound 2,
Mediumm sound 1 and
a Medium m sound 2 too be selecteed for the EC
CG HR HIGGH ALARM..

Factoryy Default sound is Medium sound 2.

For exa
ample see ECG
E AYSTO
OLE.

70
HOLD ECG ALA
ARMS

Removiing the tick from the En nabled checckbox below


w the ALAR
RM SETUP bbutton, men nu will
disable the users ability
a to turrn on the HO
OLD ECG alarms
a on th
he target m onitor.

Factoryy default is off.


o

RESP APNOEA
Removiing the tick from the En nabled checckbox below
w the ALARRM SETUP bbutton men
nu, will
disable the users ability
a to change the R
RESP Apnoe ea alarm so
ound.

The dro
op down sellection box allows the d
default alarm sound off High soundd 1, High so
ound 2,
Mediumm sound 1 and
a Medium m sound 2 too be selecteed for the RESP APNO OEA ALARM M.

Factoryy Default sound is High


h sound 1.

For exa
ample see ECG
E AYSTO
OLE.

RESP BR
Removiing the tick from the En nabled checckbox below
w the ALAR
RM SETUP bbutton men
nu, will
disable the users ability
a to change the R
RESP BR ala arm sound.

op down sellection box allows the d


The dro default alarm sound off High soundd 1, High so
ound 2,
Mediumm sound 1 and
a Medium m sound 2 too be selecteed for the RESP BR ALLARM.

Factoryy Default sound is Medium sound 1.

For exa
ample see ECG
E AYSTO
OLE.

71
USE D
DEFAULTS
S

Removiing the tick from the En nabled checckbox below w the ALARRM SETUP bbutton men
nu, will
disable the users ability
a to se
elect defaultt alarm soun
nds on the target
t monittor.

72
4.3 C
Comport Setup

Prior to updating th
he SC1000 you will nee ed to config
gure the sofftware to coommunicate e with
the corrrect com poort. If your serial cable is plugged directly
d into the compuuter, (no Usb to
serial adapter), youur com portt will more thhan likely be o on the liist. In the ex
b the first one xample
below, tthis is COM
M2 and has been selectted, denote ed by the tick to the leftt hand side.

are to use a USB to serrial port con


If you a nverter, the com port will be the lasst one on th
he list.

Comports must be
e available before
b startiing the conffiguration manager.
m

omport is dissplayed in the bottom rright hand corner


If no co c of the
e configurattion manage er
window w, close the program, and install orr connect a USB to serrial converteer. Once this is
installed
d, and you can
c see the e device in tthe compute
ers device manager
m wiith no confliicts or
errors, rrestart the configuratio
c on managerr.

4.4 S
Saving Co
onfigurattions forr future use
u

Any con
nfiguration that
t has bee
en set, can be saved to the computer for futuure use usin
ng the
Save an
nd open options on the e file menu as shown below.
b

73
4.5 S
Setting Defaults

If a seleected functio
on has user selectable
e options, th
hese will be shown direectly below that
option. This can be e seen belo
ow. ECG, Le ead is seleccted. The opption box beelow indicattes that
this is sset to Lead II.

ng the drop down menu box, you ccan see the


Selectin e other optio
ons that aree available.
Selectin
ng any of th
hese will forc
ce the targe
et SC1000 to
t use this value
v as a ddefault, onc
ce the
configuration has been
b update ed to the m onitor.

ove examplle shows that ECG Lea


The abo ad II has be
een set as a default andd the user cannot
c
change
e the selecte
ed lead.

74
4.6 D
Default Alarm
A Lim
mits

Alarm ddefaults can


n be set by selecting
s th
he desired parameter
p frrom the setuup menu then
selectin
ng the alarm
m setup for that
t parameeter.

The exa
ample beloww shows thee system de
efault ECG alarm settinngs for Aduult, Paediatric and
Neonatal. These can be set, and
a user ad djustment diisabled, by removing thhe tick from
m the
d check boxx.
Enabled

The aboove screen shots showw the HR ala


arm setup menu
m when defaults haave been se
et and
adjustm
ment disable
ed, using the
e Configura
ation manag
ger.

75
4.7 T
Transferrring the configura
c ation file
e

Once yoou have ma ade the chaanges to the


e default connfiguration and
a you aree ready to update
u
the monnitors configuration, co
onnect the ttarget SC10000 to your computer vvia your null
modemm cable and on the application man ct File, Update Config. .. (as shown
nager, selec
below)

alog box sho


The dia own below will
w appear

Switch on your targ


get SC1000 0. When the
e software has
h fully loaded and yoou can see thet
patient group scree
en, press <escape> onn the keyboard and at the
t C:> typpe updater then
press <
<enter>. Thee dialogue box
b on the cconfiguratio
on manager will briefly display Tra
ansfer in
progresss.

If the tra
ansfer has been succe box will close itself and the monitoor will contin
essful, the b nue to
load.

he target SC
Once th C1000 has been updatted, check that
t your coonfigurationss have been
n
successsful by turniing the mon
nitor off and
d back on, or
o typing LP
P400 at the Prompt.

76
4.8 R
Restoring
g Factory
y Defaultts

Factoryy defaults will restore fu


ull user conttrol, and retturn all chan
nges to defaault alarms
previously made, back
b to the factory defa
ault setting, upon upda ate of the tarrget SC100
00.

Selectinng NEW froom the file menu then updating thhe monitor, without
w makking any ch hanges
to the cconfiguration
n manager, will load fa
actory defau
ults back into the targett monitor.

77
Visit our Website for downloadable
clinical & educational material and
product information

...with people in mind

Huntleigh Healthcare Ltd. - Diagnostic Products Division


35 Portmanmoor Road, Cardiff, CF24 5HN, United Kingdom
T: +44 (0)29 20485885 F: +44 (0)29 20492520 E: sales@huntleigh-diagnostics.co.uk
W: www.huntleigh-diagnostics.com

DISTRIBUTED IN GERMANY BY:


HNE Huntleigh Nesbit Evans Healthcare GmbH
Industriering Ost 66, 47906 Kempen
T: +49 (0) 2152-5511-10 F: +49 (0) 2152-5511-20
E: Verkauf@huntleigh.de

Registered No: 942245 England & Wales. Registered Office:


ArjoHuntleigh House, Houghton Hall Business Park,
Houghton Regis, Bedfordshire, LU5 5XF

Huntleigh Healthcare Limited 2010

AN ARJOHUNTLEGH COMPANY, MEMBER OF THE GETINGE GROUP

and are trademarks of Huntleigh Technology Limited


As our policy is one of continuous improvement, we reserve the right to modify designs without
prior notice. 78
724631-1

You might also like