You are on page 1of 6

PH/ORP CONTROLLER

Specification
Dipplay:
LED, 7 segments and 4 digits

Input:
pH : Sensor code: SZ 173 with cable length 9M
ORP : Sensor code: SZ 2035 with cable length 9M

CONTROLLER Range:
pH : 0-14 pH
ORP : (-1000 +1000) mV.
(0 -1000) mV.
(0 +1000) mV.

Resolution:
pH : 0.01 pH
ORP : 1mV

Temperature reference:
0 100C or 32 212F
pH/ORP 7635
Temperature compensation:
Manual or Automatic
Made in ITALY
Setpoint 1 and 2:
On/Off Function
Min/Max Function
Delay 0 99,9 sec
Relay contact SPST, 220 V, 5 A resistive load
Options
Alarm:
Holders: Active/non-active function
Submersible holder - Pic. 1 Min/Max function
Flow cells holder - Pic. 2 Delay 0 99.9 sec
Auto-clean holder - Pic 3 Relay contact SPDT, 220 V, 5 A resistive load

Enviroment protected box: Analog output:


Single or double - IP 65 Box - Pic. 4 0 20 mA or 4 20 mA
Isolation 250 V
Power supply: Max load 600 Ohm
9 36 Vdc or 24 Vac
Power supply:
85 264 Vac, 50/60 Hz

Power consumtion:
5 VA max, with overload protection

Operating enviroment:
Indoor use
Enviroment protected - IP 20
Temprature - 0 50C
Humidity - 95% Max without condensation
Pic. 2 Pic. 3
Dimensions:
96x96x96 mm

Weight:
Approx. 500g

Pic. 1 Pic. 4 Mounting:


On Panel (with square hole 90x90 mm)
FREE CHLORINE CONTROLLER

Specification
Dipplay:
LED, 7 segments and 4 digits

Input:
Potentiostatic sensor, code: SZ 283
with cable length 3M and holder code SZ 7261

CONTROLLER Range:
(0 2,000), (0 20,00) mg/L

Resolution:
0,001, 0,01 mg/L

Temperature reference:
20 25C

Temperature compensation:
Manual or Automatic

CL 7635 Setpoint 1 and 2:


On/Off Function
Min/Max Function
Made in ITALY Delay 0 99,9 sec
Relay contact SPST, 220 V, 5 A resistive load

Alarm:
Active/non-active function
Min/Max function
Options Delay 0 99.9 sec
Relay contact SPDT, 220 V, 5 A resistive load
Holders:
Flow cells holder - Pic. 1 Analog output:
Auto-clean holder - Pic 2 0 20 mA or 4 20 mA
Isolation 250 V
Enviroment protected box: Max load 600 Ohm
Single or double - IP 65 Box - Pic. 3
Power supply:
Power supply: 85 264 Vac, 50/60 Hz
9 36 Vdc or 24 Vac
Power consumtion:
5 VA max, with overload protection

Operating enviroment:
Indoor use
Enviroment protected - IP 20
Temprature - 0 50C
Humidity - 95% Max without condensation

Dimensions:
96x96x96 mm
Pic. 1 Pic. 2
Weight:
Approx. 500g

Mounting:
On Panel (with square hole 90x90 mm)

Pic. 3
DISSOLVED OXYGEN CONTROLLER

Specification
Dipplay:
LED, 7 segments and 4 digits

Input:
Polarographic sensor, code: SZ 654.1
with cable length 5M and Pt100 build-in

CONTROLLER Range:
(0 20,00) mg/L

Resolution:
0,01 mg/L

Temperature reference:
20 25C

Temperature compensation:
Manual or Automatic

OD 7635 Setpoint 1 and 2:


On/Off Function
Min/Max Function
Made in ITALY Delay 0 99,9 sec
Relay contact SPST, 220 V, 5 A resistive load

Alarm:
Active/non-active function
Min/Max function
Options Delay 0 99.9 sec
Relay contact SPDT, 220 V, 5 A resistive load
Holders:
Submersible holder - Pic. 1 Analog output:
Flow cells holder - Pic. 2 0 20 mA or 4 20 mA
Auto-clean holder - Pic 3 Isolation 250 V
Max load 600 Ohm
Enviroment protected box:
Single or double - IP 65 Box - Pic. 4 Power supply:
85 264 Vac, 50/60 Hz
Power supply:
9 36 Vdc or 24 Vac Power consumtion:
5 VA max, with overload protection

Operating enviroment:
Indoor use
Enviroment protected - IP 20
Temprature - 0 50C
Humidity - 95% Max without condensation

Dimensions:
96x96x96 mm
Pic. 2 Pic. 3
Weight:
Approx. 500g

Mounting:
On Panel (with square hole 90x90 mm)

Pic. 1 Pic. 4
TURBIDITY CONTROLLER

Specification
Dipplay:
LCD, 1 line, 16 characters

Input:
TU sensor, code: SZ 810
Flow holder, code: SZ 910
Sensor cable, code: SZ 9481 (length 9M)
CONTROLLER
Range:
(0 4.000), (0 40.00), (0 400.0) NTU

Resolution:
0.05% of Range

Temperature reference:
20 25C

Temperature compensation:
Manual or Automatic
TU 7685
Setpoint 1 and 2:
On/Off Function
Made in ITALY Min/Max Function
Delay 0 99,9 sec
Relay contact SPST, 220 V, 5 A resistive load

Alarm:
Active/non-active function
Options Min/Max function
Delay 0 99.9 sec
Sensor: Relay contact SPDT, 220 V, 5 A resistive load
Submersible and auto-clean sensor Pic. 1
Analog output:
Enviroment protected box: 0 20 mA or 4 20 mA
Single or double - IP 65 Box - Pic. 2 Isolation 250 V
Max load 600 Ohm
Power supply:
9 36 Vdc or 24 Vac Power supply:
85 264 Vac, 50/60 Hz

Power consumtion:
5 VA max, with overload protection

Operating enviroment:
Indoor use
Enviroment protected - IP 20
Temprature - 0 50C
Humidity - 95% Max without condensation

Dimensions:
96x96x96 mm
Pic. 2
Weight:
Approx. 500g
Pic. 1 Mounting:
On Panel (with square hole 90x90 mm)
CONDUCTIVITY CONTROLLER

Specification
Dipplay:
LED, 7 segments and 4 digits

Input:
Sensor code: SZ 2373.1
(Selectable K=0.1cm or K=1cm or K=10cm)
with cable length 1.5M and Pt100 built-in
CONTROLLER

Range:
(0 20), (0 200), (0 2000) mS
(Depend on sensor)

Resolution:
0.01 mS, 0.1 mS, 1 mS depend on range

Temperature reference:
0 100C or 32 212F

Temperature compensation:
C 7635 Manual or Automatic

Made in ITALY Setpoint 1 and 2:


On/Off Function
Min/Max Function
Delay 0 99,9 sec
Relay contact SPST, 220 V, 5 A resistive load

Alarm:
Options Active/non-active function
Min/Max function
Holders: Delay 0 99.9 sec
Submersible holder - Pic. 1 Relay contact SPDT, 220 V, 5 A resistive load
Flow cells holder - Pic. 2
Analog output:
On-line sensor: 0 20 mA or 4 20 mA
On-line sensor code: SI 301 - Pic 3 Isolation 250 V
Max load 600 Ohm
Enviroment protected box:
Single or double - IP 65 Box - Pic. 4 Power supply:
85 264 Vac, 50/60 Hz
Power supply:
9 36 Vdc or 24 Vac Power consumtion:
5 VA max, with overload protection

Operating enviroment:
Indoor use
Enviroment protected - IP 20
Temprature - 0 50C
Humidity - 95% Max without condensation

Dimensions:
Pic. 2 Pic. 3 96x96x96 mm

Weight:
Approx. 500g

Mounting:
On Panel (with square hole 90x90 mm)
Pic. 1 Pic. 4
TEMPERATURE CONTROLLER

Specification
Dipplay:
LED, 7 segments and 4 digits

Input:
Pt 100 (3 wire) code SI 540
(Immersion Sensor length 500 mm)

CONTROLLER Range:
0 199.9 C

Resolution:
0.1 C

Temperature reference:
0 100C or 32 212F

Temperature compensation:
Manual or Automatic

TR 7615 Setpoint 1 and 2:


On/Off Function
Min/Max Function
Made in ITALY Delay 0 99,9 sec
Relay contact SPDT, 220 V, 5 A resistive load

Alarm:
Active/non-active function
Min/Max function
Options Delay 0 99.9 sec
Relay contact SPDT, 220 V, 5 A resistive load
Holders:
On-line sensor - Pic. 1 Analog output:
0 20 mA or 4 20 mA
Enviroment protected box: Isolation 250 V
Single or double - IP 65 Box - Pic. 2 Max load 600 Ohm

Power supply: Power supply:


9 36 Vdc or 24 Vac 85 264 Vac, 50/60 Hz

Power consumtion:
5 VA max, with overload protection

Operating enviroment:
Indoor use
Enviroment protected - IP 20
Temprature - 0 50C
Humidity - 95% Max without condensation

Dimensions:
96x96x96 mm

Weight:
Approx. 500g
Pic. 1 Pic. 2
Mounting:
On Panel (with square hole 90x90 mm)

You might also like