60mm wouldn’t be 1 Screw size 60mm 65mm convenient to get output of 250 – 300kg/hr AC motors are easy for maintenance but it gets hot 2 Driving Motor AC DC easily need external fun but DC motors are mostly suggested one Both Vacuum Tank and Spray Tank is 9m each 3 Spray Tank 9m 6m better to check if there is not space constraints length wise. The haul off motor power Haul off motor 4 0.75KW 1.1KW should be increased to pull power the pipe The extruder is mentioned to be one but when it No of motors of haul comes to haul off and 5 2 1 off and cutter cutter it have two motors each that means double output. There is no recommended 6 Recycling Unit 0 1 recycling unit for the pipes Vacuum Pump is the one which creates vacuum in the vacuum tank that gives Vacuum Pump motor 7 3Kw 4Kw proper shape for the pipe capacity so it should have enough power to create the vacuum.
2. PVC Specification Comment
S/N Description Offered Suggested Reason
180mm is not included in 1 Product rang 180mm the offer It is better to have a wider product range and also this 2 Pressure Rating 4-16PN 2PN product is highly demanded For PVC only one sleeve is 3 Calibration Sleeve 2each 1each required for each diameter Better to buy printer here from local supplier for 4 Printer maintenance and spare as well as ink supply The max sizes of the down stream line should be Max. Size of down higher than the maximum 5 250mm 315mm stream it can produce and for future upgrading purpose we need it to be 315mm Since the length of screw loading conveyor we Direct Material loading Screw couldn’t keep the mixer 6 loading from system loader that much near to the the mixer machine that will lead to material spillage Like previous AC motors are easy for maintenance but it gets hot easily need 7 Driving Motor AC DC external fun but DC motors are mostly suggested one When working in big diameter we need enough vacuum to develop in the Barrel Vacuum Pump 8 1.5Kw 2.2Kw barrel zone to have a good motor pipe and we suggest to have bigger capacity motor for that. Sizes mentioned for die 9 Size 225mm head, calibration sleeve that size is missing When we produce bigger size if it is 3jaw caterpillar 3 jaw 4jaw 10 Haul off it will slip doesn’t have caterpillar caterpillar good grip so we need it to be 4jaw. For enough circulation of water in the sprayer we 11 Water pump motor 4Kw 5.5Kw need good water pump motor. Machine need 2 Oven and 12 Belling station 2 1 1 belling station. 3. Automatic belling Specification Comment
S/N Description Offered Suggested Reason
The sizes should be higher than the maximum it can 1 Max. Size 250mm 315mm produce and for future upgrading purpose we need it to be 315mm Only model is stated not 2 Hydraulic Oil pump capacity so we need detail information