Professional Documents
Culture Documents
Introduction
This procedure shows you how to upload a Firmware file to the SE8000 Series Room Controllers.
The SE8000 Uploader Tool can be installed on Computers and Tablets running the following operating systems:
• Microsoft Windows 7, 32-bit (requires Service Pack 1 and .NET framework 4.5).
• Microsoft Windows 7, 64-bit.
• Microsoft Windows 8, 32-bit and 64-bit
UPGRADE FIRMWARE
A-type
B-type
1. Connect A-type plug to PC and connect B-type plug to SE8600 Room Controller (example shows SE8600 model).
2. Click desktop short-cut to activate Uploader Tool.
3. Toggle Advanced Mode.
4. Toggle Firmware and Fonts library.
5. Select Firmware file available in drop-down menu (screen shows example Firmware).
6. Click Upload and wait for operation to complete successfully.
NOTE: do not shut down Uploader tool or disconnect USB cable during this step until operation is complete.
7. Close Uploader Tool.
Technical Support
For any issues with SmartStruxure Solution or SmartStruxure Lite, contact Schneider Electric Technical Support according to your region.
Field Devices
productsupport.HVAC@schneider-electric.com
Schneider Electric is the global specialist in energy management and automation. With rev-
enues of 25 billion in FY2014, our 170,000 employees serve customers in over 100 countries,
helping them to manage their energy and process in ways that are safe, reliable, efficient and
sustainable. From the simplest of switches to complex operational systems, our technology,
software and services improve the way our customers manage and automate their operations.
Our connected technologies will reshape industries, transform cities and enrich lives.