You are on page 1of 1

SK D 15-G

DIN 8555 : MF 3-GF-60-T

DESCRIPTION 1
Special tool steel Iron base alloy designed to rebuild tools for cold and hot working applications.

SUITABLE FOR 2
Repairs on various forging dies in the automobile industry.

TYPICAL CHEMICAL ANALYSIS (WEIGHT %) 3

C Mn Si Cr Mo W V Fe Co
All Weld 0.40 0.6 0.4 1.40 0.5 9.0 0 Bal. 3.0

TYPICAL MECHANICAL PROPERTIES 4

Hardness as welded
60 HRC

GENERAL CHARACTERISTICS 5
 Microstructure Martensite
 Machinability Good with cubic Boron Nitride tipped tools
 Oxy-acetylene cutting Cannot be flame cut
 Deposit thickness Depends upon application and procedure used
 Shielding gas Argon 98% + Oxygen 2%
 Metal cored

WELDING PARAMETERS & ECONOMICAL DATA 6


Diameter Current Voltage Stick- Gas Rate Article Packaging Availability
[mm] [A] [V] Out [l/min] code
1,2 200-300 25-31 20 max 12-15 29602 Spool 15 Kg On request
1,6 250-450 25-31 20 max 15-18 29603 Spool 15 Kg Standard

The information about the products contained in the data sheets are based on intensive tests and careful investigations.
However we can't assume any form of liability concerning the exactness of it. The information may be changed or updated
without previous notice. The user is invited to test the product with regard to his own application and responsibility.
| SOUDOKAY SA | RUE DE L'YSER 2 | B-7180 SENEFFE | BELGIUM | soudokay @soudokay.be | www. soudokay.com
| SALES: T +32 (0)64 51 02 25 | LOGISTICS: T +32 (0)64 51 02 10 | FINANCE: T +32 (0)64 52 00 30
F +32 (0)64 51 02 21 F +32 (0)64 51 02 19 F +32 (0)64 52 00 31

Revision : 200508171404

You might also like