Professional Documents
Culture Documents
In most of the manufacturing scenario, there will be few PRT's like Jigs,Fixtures, Beams etc,. It
will be a requirement to track the usage of the same.
One of the way is explained below.
the below scenario will be possible only if you are working in the Discrete Manufacturing
environment.
This particular topic has more integration with the Plant maintenance module.
Process Flow:
1. Create a equipment
2. Create Characteristics
After the measuring point is created, now in the PRT tab as mentioned earlier attach the
same in the field.
this assignment is very important.
5. Attaching the PRT in the routing.(CA02)( When you are doing this scenario for the first time,
do as described below only)
In the routing, go to the operation overview, now attach the PRT as equipment.
It will ask you to enter the usage value etc.
Here assign 1 and uom as EA/PC whatever you have mentioned in the step2
Once you have completed the assignment save this routing.
Now do the production confirmation for the production order /Operation for which the
PRT has been added.
Now in the IK03 you can display the measuring documents that have created.
for each production confirmation you will have individual document getting created.
Now you will have the usage value for the PRT. Since the PRT has been created as equipment
we can trigger a maintenance plan etc. from here you can do forward integration to PM
module.9. PRT in orders.
For example if we have one PRT called PRT0001 this can be used in only one order at a
time.
So to track if we have used in many order or in which all orders this PRT has been used.
You can use PRT in order T.code.
10. General
Generally in the discrete manufacturing environment we can attach during the Production
order creation.
3 likes
Mandatory
Standard Entry
Item Equipment Instrument