Professional Documents
Culture Documents
PRODUCT CATALOG
COMMERCIAL
CONTENTS CONTENTS
RACKS/ENCLOSURES ECR RACKS PANELS
GAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ECR-10/10CH . . . . . . . . . . . . . . . . . . . . . . . . 26 AFG, AFG-CL1, AFG-CL2 . . . . . . . . . . . . . . 38
KAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ECR-10/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 FPL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
SKR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ECRR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 QFPL-1, QFPL-2 . . . . . . . . . . . . . . . . . . . . . . 38
SWR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 SFG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
WMK-7, WMK-10 . . . . . . . . . . . . . . . . . . . . . . 6 GRAPHITE GROUP SFT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
PWR 40-24 . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 GRF-12, GRF-20 . . . . . . . . . . . . . . . . . . . . . . 27 VPL, VPL-CL . . . . . . . . . . . . . . . . . . . . . . . . . 38
ROTR Captive, CPROTR-CL . . . . . . . . . . . . . . 8 GRF-WS, GRFSS . . . . . . . . . . . . . . . . . . . . . 27 AFT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
ROTR, POTR . . . . . . . . . . . . . . . . . . . . . . . . . . 9 EVP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
RTB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 ELITE RACKS & STANDS FVP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
ROTR-HD . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 ERK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 PSC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
ESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 PVP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
RACK OPTIONS ERSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 SEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Casters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 S12 Speciality panels . . . . . . . . . . . . . . . . . . 39
EKO knockout panel . . . . . . . . . . . . . . . . . . . 12 ECONOMY RACKS HVP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Fans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 ERD, ERD-P . . . . . . . . . . . . . . . . . . . . . . . . . 29 LSC, LSCP, LSCP-8 . . . . . . . . . . . . . . . . . . . 40
Fan Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 ER-4, 6, 8, 12, 14, 16, 20 . . . . . . . . . . . . . . . 29 S16U . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Quiet fans . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 ER- 8/18, 12/8, 12/16 . . . . . . . . . . . . . . . . . . 29 DCR Decora panels . . . . . . . . . . . . . . . . . . . . 40
GAR Caster base . . . . . . . . . . . . . . . . . . . . . . 12 ER- 12/18, 16/18, 20/18 . . . . . . . . . . . . . . . . 29 RME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
LCS lacer strip . . . . . . . . . . . . . . . . . . . . . . . . 13 ERS-10, ERS-18 . . . . . . . . . . . . . . . . . . . . . . 29 VBP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
QFPL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 SCDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
TB tie bars . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 MODULAR PANELS
FL Floor Levelers . . . . . . . . . . . . . . . . . . . . . . 13 CONFIG-U-RAXX SYSTEMS Banana module . . . . . . . . . . . . . . . . . . . . . . . 41
SYSTEM 1, 2, & 3 . . . . . . . . . . . . . . . . . . . . . 30 Blank module . . . . . . . . . . . . . . . . . . . . . . . . 41
POWER DISTRIBUTION SYSTEM 4 & 5, ETUDE . . . . . . . . . . . . . . . . . 31 BNC module . . . . . . . . . . . . . . . . . . . . . . . . . 41
LPPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Canare BNC module . . . . . . . . . . . . . . . . . . . 41
MPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 CONFIG-U-RAXX COMPONENTS Duplex module . . . . . . . . . . . . . . . . . . . . . . . 41
PD-800, PD-800L, PD-800VM . . . . . . . . . . . 14 ASW20-29M . . . . . . . . . . . . . . . . . . . . . . . . . 32 Elco module . . . . . . . . . . . . . . . . . . . . . . . . . . 41
SCD-36M, SCD-42M . . . . . . . . . . . . . . . . . . . 32 Hubbel Twistlock module . . . . . . . . . . . . . . . 41
THERMAL MANAGEMENT SSW-22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 MBP-2, MBP-3 . . . . . . . . . . . . . . . . . . . . . . . 41
CLS-A, CLS-P . . . . . . . . . . . . . . . . . . . . . . . . 15 ACD-30-45B . . . . . . . . . . . . . . . . . . . . . . . . . 33 MCF-1, MCF-2, MCF-3 . . . . . . . . . . . . . . . . . 41
LVT-A, LVT-P . . . . . . . . . . . . . . . . . . . . . . . . . 15 ACD-42-56 . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Midi module . . . . . . . . . . . . . . . . . . . . . . . . . . 41
TKV-P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 CRND-B . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Modular Vent panel . . . . . . . . . . . . . . . . . . . . 41
KBS-1 & 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Multipin Whirlwind module . . . . . . . . . . . . . . 41
CONVERTA RACKS RB-22, 36, 46, 60 . . . . . . . . . . . . . . . . . . . . . 33 MWB-2, MWB-4, MWB-6 . . . . . . . . . . . . . . . 41
CR, CR-SM . . . . . . . . . . . . . . . . . . . . . . . . . . 16 SFD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Neutrik module . . . . . . . . . . . . . . . . . . . . . . . 41
SFRK-4B . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Phone module . . . . . . . . . . . . . . . . . . . . . . . . 41
DATA COMMUNICATION UCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 RCA module . . . . . . . . . . . . . . . . . . . . . . . . . 41
CMP-1C, CMP-1M . . . . . . . . . . . . . . . . . . . . 17 SCSI module . . . . . . . . . . . . . . . . . . . . . . . . . 41
RCM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 STORAGE Universal module . . . . . . . . . . . . . . . . . . . . . . 41
RFM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 CDP, CSP . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 XLR Female module . . . . . . . . . . . . . . . . . . . 41
RWM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 FDI, DL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 XLR Male module . . . . . . . . . . . . . . . . . . . . . 41
RKV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
ERT RACKS PB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 ACCESSORIES
ERT-ST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 RCD, RCD-CL . . . . . . . . . . . . . . . . . . . . . . . . 34 AMSS/AMSL . . . . . . . . . . . . . . . . . . . . . . . . . 42
ECR-ST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 RDVD, RDVD-CL . . . . . . . . . . . . . . . . . . . . . . 34 AR-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
ECR-SL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ESD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 CBLD - cable depot . . . . . . . . . . . . . . . . . . . 42
ECR-PS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 SDR, SDR-A, SDR-CL . . . . . . . . . . . . . . . . . . 35 CT - cable ties . . . . . . . . . . . . . . . . . . . . . . . . 42
ERT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 HH1 & HH 2 - headphone hangers . . . . . . . . 42
ERT-SD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 SHELVES POMT-6, 8, ST . . . . . . . . . . . . . . . . . . . . . . . 42
ERT-SL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 EXS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 RSG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
SLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 STOP-IT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
BOARDROOM GROUP SLS, SLS 1.5 . . . . . . . . . . . . . . . . . . . . . . . . . 36
BRG-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 SKRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 HARDWARE
BRG-12D, BRG-12T . . . . . . . . . . . . . . . . . . . 21 UNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 CPSW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
UTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 RKRL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
RESIDENTIAL ATS-16-26 . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 HPSW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
ST-ROTR, W-ROTR . . . . . . . . . . . . . . . . . . . . 22 ROTRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 PNTX, PNTX-B . . . . . . . . . . . . . . . . . . . . . . . 43
CMK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 TR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 PTSW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
FSK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 UTVS-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 SDS, SDB . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
iRDS-1, iRDS-2 . . . . . . . . . . . . . . . . . . . . . . . 24 VCS-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 SHWS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
WDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 STSW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
WMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
WELCOME
RAXXESS
We have had the pleasure of serving the audio/video community in a
variety of applications and venues all over the United States, and in fact,
all over the world. While providing accessories, racks and enclosures Finishes
to music stores, professional audio suppliers and commercial installers Configuraxx
has been fun and a service we have enjoyed, the real joy and challenge Silver hammertone
has been in developing new products and designs to ease the problems
and issues that ordinarily face users. We are proud of our development Ebony sand
As always, we ask that you peruse our newest catalog. Should it evoke
Elite Racks Graphite
ideas, questions or comments, we would love to hear them. If you are
Ebony Silver
currently doing business with us we thank you for your support. If not, we fleck anodized
vinyl
would appreciate the opportunity to show you who we are and what we Graphite
Maple
check
can do for you. .
You’ll find that at Raxxess, the customer truly does come first.
Panels/Drawers/Shelves
Anodized aluminum
Racks/Enclosures
Black wrinkle powder coat
1
RACKS/ENCLOSURES
RACKS/ENCLOSURES
features options
• Welded 14 and 16-gauge cold-rolled steel • Roof panel inserts for a variety of
enclosure with 11-gauge 10-32 threaded applications
rack rail • Locking front and rear doors with
• Beveled corners on rack, contemporary recessed handles
appearance • Locking quick-release side panels
26.0 or 32.0 • Wide-profile rack rail provides additional • Caster base available
24.25
clearance for cable management
• Cable passages in rack rail for easy
inter-rack cable routing
• Rear mounted removable panels with BNC
and conduit knockouts
A LPPS-6
B C
finish
Black Powder Coat
D
LPPS-9
E
Levelers can also be used with this
GAR-CB rack. Sold in sets of 4.
GART-10F
GART-S
GART-4.5F GART-P
GAR-35-26 61-1/4” (35 space) 26” 24-1/4” 24-1/4” 67-1/2” 69-1/8” LPPS-9 or 12*
GAR-35-32 61-1/4” (35 space) 32” 30-1/4” 24-1/4” 67-1/2” 69-1/8” LPPS-9 or 12*
GAR-40-26 70” (40 space) 26” 24-1/4” 24-1/4” 76-1/4” 77-7/8” LPPS-9 or 12*
GAR-40-32 70” (40 space) 32” 30-1/4” 24-1/4” 76-1/4” 77-7/8” LPPS-9 or 12*
Solid Perforated Recessed GAR-44-26 77” (44 space) 26” 24-1/4” 24-1/4” 83-1/4” 84-7/8” LPPS-9 or 12*
Rear
door Plexi front front Side Panels (GAR-SP) GAR-44-32 77” (44 space) 32” 30-1/4” 24-1/4” 83-1/4” 84-7/8” LPPS-9 or 12*
(GARD-R) front door door
door (GARD) (GARD-P) * MPS (modular panel strips) also available. See page 14
(GARD-PLX)
www.raxxess.com
2
RACKS/ENCLOSURES
RACKS/ENCLOSURES
KAR enclosed rack
The Raxxess KAR Enclosed Rack features welded, 16-gauge
cold-rolled steel construction with fully adjustable front rack rail
(optional rear rail kits available). Rack rail supports are punched
with quarter inch holes for cable tie off points. The fully
Beveled corners, front ventilation slots enclosed KAR series of racks is available in outside depths of
22” and 28”, accommodating equipment up to 20” and 25”
respectively.
Features include removable conduit knockout panels at both
the top and bottom rear of the enclosure. Additional knockouts
are located on each side of the rack for passing cable directly
through and allowing multiple racks to be connected. A unique
cable strain-relief furrow is located in the bottom pan of the Height
without
Cable strain-relief furrow behind rack, as are punched holes to accommodate optional casters casters
removable KO panel, caster-ready - without the use of a costly caster base. Sides, top and bottom
no caster base needed
have venting slots to promote air flow for cooling.
features
• Removable conduit knockout panels
• KOs in both sides for side-exiting cable
• Unique cable strain-relief
options LPPS-3
KAR-18-22 31-1/2” (18 space) 22” 20” 22” 36” 37-1/2” LPPS-3*
KAR-18-28 31-1/2” (18 space) 28” 26” 22” 36” 37-1/2” LPPS-3*
KAR-24-22 42” (24 space) 22” 20” 22” 46-1/2” 48” LPPS-6*
D KAR-24-28 42” (24 space) 28” 26” 22” 46-1/2” 48” LPPS-6*
E KAR-35-22 61-1/4 (35 space) 22” 20” 22” 65-3/4” 67-1/4” LPPS-9 or 12*
KAR-35-28 61-1/4” (35 space) 28” 26” 22” 65-3/4 67-1/4” LPPS-9 or 12*
KAR-40-22 70” (40 space) 22” 20” 22” 74-1/2 76” LPPS-12*
KAR-40-28 70” (40 space) 28” 26” 22” 74-1/2 76” LPPS-12*
KAR-44-22 77” (44 space) 22” 20” 22” 81-1/2” 83” LPPS-12*
KAR-44-28 77” (44 space) 28” 26” 22” 81-1/2” 83” LPPS-12*
Side View Front View Rear View
* MPS (modular panel strips) also available. See page 14
www.raxxess.com
3
RACKS/ENCLOSURES
RACKS/ENCLOSURES
optional
Up to
42 spaces
Optional
rear rack
rail kit
includes 4
horizontal
members.
20”
19”
Perforated Solid
Shown with optional casters and rear rack rail kit front/rear Steel
front Plexi side
door front door
(SKRD) panels
(SKRD-P) door (SKR-SP)
(SKRD-PLX)
features
• 20, 26 & 30” depth available
Use CASTER/CM
• Easily gangable Sold in sets of 4.
• Quick assembly
*Locking casters not
• Economical shipping (UPS) recommended.
SKRS
• Up to 42 spaces (73-1/2”) Optional Shelf for SKR rack.
* Other sizes available as special order. To calculate height for custom sizes, multiply total
19-1/2” number of desired rack spaces x 1.75” and add 5.5”.
3-1/2”
Bottom View
finish
Black Powder Coat
www.raxxess.com
4
RACKS/ENCLOSURES
RACKS/ENCLOSURES
SWR sectional wall rack
The Raxxess sectional wall racks have been re-designed with ease of
installation, security and structural integrity in mind. The SWR series
is a fully welded enclosure. The back pan is reinforced at the hanging
points to minimize the possibility of tear-out. Welded stiles and rails
eliminate cabinet distortion while an extended bottom lip provides
support for the center section during installation and use. The center
section pivots on alloy steel socket pins, that thread into weld nuts on
the cabinet. These pins aid during installation making it possible for
one person to install the rack with just the use of a hex key. The rack is
equipped with fully adjustable, 11 gauge rack rail, ventilated sides, and
a varitey of conduit knockouts in the top and bottom. Further, there are
abundant tie off points throughout the rack. Keyed locks are standard
between the rear and center sections and between the center and the
optional front door. The SWR can be set up so that both the center
section and door can swing left or right. The rack is finished in durable,
black powder coat. Shown with optional
locking rod and optional
front door.
finish
Black Powder Coat
optional
LPPS-3
LPPS-6
PD800-L
Solid front door
(SWRD)
Plexi front door Perforated front
(SWRD-PLX) door(SWRD-P)
4-1/2”
C
features
A • Fully welded construction
B • Alloy steel socket pins reduce sag
• Cabinet section & optional door
Rear panel swing left or right
Model Overall Racking Height Height Center Rear Overall Rackable Width Weight Power
Height (A) Depth Depth Depth w/door Depth Capacity Options
(B) (C)
.
SWR-10-12 24-1/2” 10 space (17-1/2”) 21-3/4” 12” 4-1/2” 17-3/4” 15” 22” 150lbs. PD800L*
SWR-10-17 24-1/2” 10 space (17-1/2”) 21-3/4” 17” 4-1/2” 22-3/4” 20” 22” 150lbs. PD800L*
SWR-18-12 38-1/2” 18 space (31-1/2”) 35-3/4” 12” 4-1/2” 17-3/4” 15” 22” 200lbs. LPPS-3*
SWR-18-17 38-1/2” 18 space (31-1/2”) 35-3/4” 17” 4-1/2” 22-3/4” 20” 22” 200lbs. LPPS-3*
SWR-24-17 49” 24 space (42”) 46-1/4” 17” 4-1/2” 22-3/4” 20” 22” 300lbs. LPPS-6*
5
RACKS/ENCLOSURES RACKS/ENCLOSURES
WMK wall mounted rack
Compact audio enclosures for smaller installations.
Constructed of 16-gauge steel, finished in durable black
powder coat. Equipped with 11-gauge rack rail, WMK
has conduit knockouts top and bottom and slotted sides
for passive cooling. Key hole slots on rear panel of WMK
allow for secure attachment to wall, while the WMK-10
utilizes a rear mounting pan with a laser knockout for
cable passage. Standard front locking door can swing
from left or right and is 1.5 inches deep.
WMK-10
Shown with rear
mounting pan
3-1/8”
Side View
9-1/4” Racking Rear panel Mounting Detail
Height
Wall
3-1/8” 16”
A
www.raxxess.com
6
RACKS/ENCLOSURES
RACKS/ENCLOSURES
PWR 40-24 pivot wall rack
A new entry to the Raxxess line up of wall mounted racks, the PWR mounts securely to a
wall while also resting safely on a solid, steel platform that transfers all of the weight of the
rack to the floor. This platform is equipped with levelers to be used in any or all of the four
corners to adjust for uneven floors. The platform performs double duty as a cable entry
port and functional means for concealing cable bundles. A similar, yet smaller cable entry
compartment is located at the top of the rack. Removable front covers are provided for
each compartment.
The PWR can be set up to pivot 90 degrees left or right allowing access to the rear of
the rack for quick and easy servicing of equipment. The center section secures to the
rear pan with both a keyed lock and a latch that accepts a padlock. The rack is further
equipped with 12 gauge adjustable rack rail, abundant cable tie-off points and ventilated
sides. There are a variety of conduit knockouts located in the top and bottom of the rack
to accommodate cables. A 12” x 12” knock out in the back pan allows for cable bundle
entry from the wall. The center section has two knockouts allowing for the use of 4-1/2”
fans. Finished in a durable, black powder coat.
standards
• Abundant cable management points
• Keylock and latch
• Generous cable entry points located at
top and bottom
• 13 gauge, one piece steel platform
equipped with levelers to accommodate
uneven floors Shown with
Raxxess logo
panel - not 24”
included
23”
32-1/2”
Fan
knockout
23-1/4”
22-7/8”
6-3/4”
7” 5-1/2”
perforated door
(PWRD-40P)
74-1/2”
finish
Black Powder Coat
9” 7” 9”
www.raxxess.com
7
RACKS/ENCLOSURES
RACKS/ENCLOSURES
ROTR/CAPTIVE
Installing and maintaining equipment in traditional commercial racks can be a
time consuming and tedious process. While moving a rack around on casters
can provide some degree of accessibility, Raxxess has a better way. Designed
Rack
rotates 90 to save you time and money on service calls by enabling unprecedented
degrees access to installed equipment, the new Captive ROTR rack is an idea whose
in either
direction time has finally come. The Captive ROTR rack consists of a roll-out 22” deep
when fully rack frame on heavy duty 4” casters and a 16-gauge welded steel housing.
extended. A ball-bearing swivel base sits between the caster base and the reinforced
12-gauge rack frame allowing 90 degree rotation when the rack frame is at
full extension. Heavy-duty 28” full-extension telescoping sliders allow the rack
frame to move smoothly in and out of
the housing. Our unique 3” wide cable
passage cutout in the roof combined
with ample cable tie-off points in the
rack allow for easy cable management.
Available in 35 and 42 spaces. Can
support up to 750 pounds.
CPROTR-CL
This rack is designed with all the features of the Captive ROTR,
but for permanent installations in custom closets. It is .
26” available up to 44 rack spaces and designed to .
22-1/8” support up to 750 pounds.
B
A
6.0”
RACKS/ENCLOSURES
ROTR roto rack system Rack rotates 90 degrees in
either direction when fully
Raxxess pioneered the concept of rotating racks and continues to lead the industry with extended
cutting-edge rotating rack designs to suit practically any application. Perfect for installing
in existing cabinetry or new millwork, the Raxxess Rotary Rack System comes in sizes
from eight to twenty four rack spaces. The rack extends a full twenty inches from its
frame and is then capable of rotating 90 degrees in either direction, allowing unobstructed
access to components regardless of their depth. The system locks in the closed position
with security panel and screws provided. Easy and effective cable management system
and eight-space rear rack rail are included. The ROTR-XL version has an extended base
designed to increase clearance when mounted behind cabinet doors.
standards
• Easy and effective cable
management system
• 8 space rear rack rail
rotation-lock
D D
C
A E
B
options
• ROTRS - Provides a stable platform
POTR pull out rack for components
17”
www.raxxess.com
9
RACKS/ENCLOSURES
RACKS/ENCLOSURES
ROTR-HD
3-1/4”
standards
4-7/8” • Articulating cable carriers
22”
4” to 15” as • Front and rear rail
per specification
24” • 22” deep mounting base
• 18” deep rack frame
• Recess up to 3” from front edge of
opening
features • User-adjustable extension truck included
for mounting 4” to 15” from floor
• Ideal in applications where bottom rack 45-1/2”
space is 4” or more above the floor
• Available up to 44 rack units
• 650 pound weight capacity
finish
Black Powder Coat
• Ventilated top accepts up to four 4”
cooling fans
• Accommodates all 19” rackmount
electronic components
26-1/2”
Partially rotated position
Side View Side View - extended
Front View
19-1/2” 18”
3-5/8” rack top accepts 4
4-1/2” fans
rack rail up to 44 RU
(77” usable rack space)
hinged
cable
carriers
standard rack bottom
super duty
slider /base 4-7/8” swivel assembly
assembly
22” 22”
23-1/2” max rack base 46” approx.
www.raxxess.com
10
NOTES
NOTES
www.raxxess.com
11
RACK OPTIONS
RACK OPTIONS
FANS
The FAN-4 mounts easily, (hardware supplied), on our Fan Panels (FPL1,
FPL2, FPL3). Rated at 39dBA per fan, 95CFM; 115 volts of AC. Power
cord (without plug) attached.
The FAN-10 mounts easily to the roof insert (GAR-FTP10) offered with
our GAR series racks, this 115 volt, 10 inch ball bearing fan moves 550
CFM and has a free air rating of 49dBA. Wire and mounting hardware
FAN - 4 included.
FAN - 10
FAN/Quiet
QUIET FAN
For noise sensitive jobs this 4-1/2” fan is rated at <30dBA, 50CFM.
QFPL-1
FAN GUARDS
Fan guards available for both 4.5” and 10” fans.
FAN guard- 10
a CASTERS
a. CASTER-CMLCK Locking, hard rubber, 2.5”, ball bearing swivel
caster; 175lb capacity/caster. Use with KAR/SKR series.
b. CASTER-CM Same specs as above except non locking. Use with
KAR/SKR series.
b
www.raxxess.com
12
RACK OPTIONS
RACK OPTIONS
TB tie bars
NEW 4” offset “L” shaped
Economical and efficient cable tie bar with multiple slots
management. TBO
TBO 4” offset tie bar for rear
cabling and stress relief.
TBA Thick aluminum tie bar for both TBS 1/4” round tie bars for small
TBS
vertical and horizontal cabling. horizontal cabling
TBA
TBL
LCS1
FL floor levelers
Set of 4 floor levelers, threaded posts fit all GAR and KAR racks. Adapter plate included.
www.raxxess.com
13
POWER DISTRIBUTION
POWER DISTRIBUTION
LPPS-3
Length: 24”
LPPS-6
Length: 36”
LPPS-9
Length: 48”
Not Shown: LPPS-12
Length: 60”
PD-800
www.raxxess.com
14
THERMAL MANAGEMENT
THERMAL MANAGEMENT
CLS-P passive vent
This ABS plastic, louvered vent fits neatly into
a 3 inch round hole for surface mounting. Grill
face is 3-1/2” square. Perfect for use in smaller CLS-P
cabinets and credenzas or in conjunction with
our TKV-P toe kick vent.
BRG-20
Shown with LVT-P
BRG-12D
Shown with TKV-P
www.raxxess.com
15
CONVERTA RACKS CONVERTA RACKS
Raxxess Logo Panel
Not Included.
CR converta rack recessed
Ideal for the dj or musician who values their time. After removing the top
panel a 10 or 12 space rack can be moved to any of 8 different stops
from zero to 45˚. Removing the front panel allows the use of 6 or 10
spaces of equipment. Remove the rear cover and there is easy access for
connecting cables. The Converta rack is constructed with 1/2” plywood
with black carpet covering, recessed spring loaded handles and latches.
Casters are standard with CR-10/10 and CR-12/10. Optional caster base
available for CR-10/6.
CR-SM
G
E
Side View
Front View B
A C
F
features Model Racking Racking Width Mixer Top Lid Front/Rear Total
Depth (A) Height (B) (C) Depth (D) (E) Lid (F) Depth (G)
• Available in 3 standard sizes
(CR-10/6, CR-10/10, CR-12/10) CR-10/6 16-1/2” 10-1/2” 20-1/2” 5” 2-1/2” 2” 20”
• Portable and easy to use CR-10/10 16-1/2” 17-1/2” 20-1/2” 5” 2-1/2” 2” 20”
• Quick and easy set-up CR-12/10 19” 17-1/2” 20-1/2” 5” 2-1/2” 2” 23-1/4”
• Rugged, carpeted exterior
www.raxxess.com
16
DATA COMMUNICATION
DATA COMMUNICATION
RFM relay floor mount
Two sets of 11-gauge rack rail incorporated in to a 16-gauge steel top and bottom allow simple
assembly of our RFM racks. Channel stiffeners are supplied, adding strength to this self-squaring
unit. Rails tapped for 10-32 standard rack screws. Available in sizes from 24 to 42 rack spaces.
Rack rated at 145 pounds. Fifty rack screws provided. Finished in black powder coat.
Front View
Model Panel Space Depth Width Height
(A) (B) (C) (D)
C
finish
Black Powder Coat
Top View
CMP-1C/CMP-1M
Rackmount cable management panels in two different styles.
Rugged construction, black powder coat finish.
CMP-1M
finish CMP-1C
Black Powder Coat
www.raxxess.com
17
ERT RACKS ERT RACKS
ERT-ST steel elite roll top
The ERT-ST Elite Roll-Top is a secure audio/video control center. Constructed of
powder coated stee;, the rack ships assembled via common carrier. The ERT-ST
features a curved top with ultra strong track system.
ERT-ST
Height:
39-5/8”
Height
with
casters:
44”
Equipment
Not Included.
34” 12 Spaces
(21”)
48”
features
• 3 Locking Doors - front, back and top
• 16-gauge fully welded steel construction
• 12U Mixer top section; 16U Bottom racking section
• Industrial grade casters standard
• Powder coat finish
* Now available solid • Adjustable rear rack rail
black powder coat
www.raxxess.com
18
ERT RACKS
ERT RACKS
ERT elite roll top rack
Providing area for housing most 32-channel mixers along with 28 spaces of rackmount equipment, the ERT Elite Roll-Top is a
secure audio/video control center. The locking roll-top cover prevents unauthorized users from accessing mixer controls, while two
locking pocket doors cover the two 14-space rack bays. Locking rear doors provide additional security and complete the overall
appearance. The heavy duty industrial casters allow for easy indoor transport. Constructed of 3/4” melamine with brass-plated
hardware, rack ships assembled via common carrier. The ERT features a curved facade with ultra strong track system. Available in
a walnut or cherry melamine to look great in any setting.
Height:
39-1/2”
Height with
casters:
41-3/8”
Walnut 31”
Maximum console
height is 9-1/2”
with optional
shelf 8”
Height:
39-3/4”
Height with
casters:
43-3/4”
34”
Optional slide out, slanted, ten space rack shown as an alternative to rack rail.
This slant rack can be mounted in either the left or right bay and is equipped
with large grommets for cable passage.
www.raxxess.com
19
BOARDROOM GROUP BOARDROOM GROUP
BRG-20
The BRG-20 is a twenty space rack that is a match for our credenzas (BRG-12D or 12T). Rack rail is
standard in this rack as is a bottom grommet for cable passage. A solid rear door is standard, above which
is located a louvered, vent for passive ventilation. Construction is of 3/4” black oak melamine with simulated
aluminum panel inserts. Choose either a solid or perforated locking front door. Delivered fully assembled.
Perforated
Door Detail
Vent Detail
24”
40”
BRG-20 Rear View
Shown with optional shelves.
21-5/8”
BRGD-20LP
20” Rackable Depth
options
• Choice of either a solid, locking front door .
or a perforated locking front door
• Shelving may be used in place of rack rail
• Cooling fans to fit louvered vent in rear
www.raxxess.com BRGD-20
20
BOARDROOM GROUP
BOARDROOM GROUP
BRG-12D BRG-12D
20” Rackable Depth
options
• Choice of either a solid, locking front door .
or a perforated locking front door
• Shelving to be used in place of rack rail
• Cooling fans to fit within rear vents
BRG-12T
The BRG-12T is a triple bay credenza. The outside bays
are fitted with 12 space rack rail, the center bay houses two
adjustable shelves. All bays are rear vented, come standard
with rear doors and bottom grommets for cable passage.
Choose either a solid or perforated locking front doors.
24”
26”
61-3/8”
features
Integral cable • Heavy duty steel construction
management • 275 pound capacity
• Available with up to six adjustable shelves
• Rotating base with positive stops at zero and 90 degrees
in either direction
• Integral wire management
• Ventilated shelves with brushed aluminum leading edge
features
W-ROTR
• 200 pound weight capacity
• Adjustable melamine shelves
• Three sizes accommodate up to six shelves
www.raxxess.com
22
RESIDENTIAL
RESIDENTIAL
Raxxess custom mounting kits offer an easy and attractive solution for rack mounting non-rackmount components. Perfect for custom home
installations, office suites or any other location where aesthetics are as important as sound, these kits will give your installation the “custom”
look that your clients will love. Our library of component dimensions grows daily, making it easy for you to have a perfectly finished look with any
installation. Each kit includes the aluminum faceplate with brushed, black anodized finish, cold-rolled steel rack shelf, and rear braces that prevent
shifting. Optional clamping bars are available when maximum stability is required.
End caps
CMK
Snap washers
W D
FSK finishing kit
To achieve ideal aesthetics in residential installations, our new finishing C
kit is available in both black anodized (FSK-B) or in clear anodized
finish (FSK-CL) a complete compliment of washers (16), screws (16)
and end caps (8) are included with the individually sold strip (45 Front View F Side View
spaces). Can be easily cut to fit the installer.
Photocopy this page or download from www.raxxess.com and fax to us for easy ordering. 1-800-398-7299
www.raxxess.com
23
RESIDENTIAL
RESIDENTIAL
The in-rack iPod® docking station is available as the single station (iRDS-1) or the dual station version (iRDS-2) for simultaneous use of two
iPods®. Both stations occupy only one rack space. The in-rack iPod® docking station provides USB and audio outputs and is compatible with
all iPod®, iPod mini®, iPod nano®, iPhone 6® and iPod Touch® products. The Raxxess in-rack iPod® docking station provides that seamless
system integration you are looking for. USB cable can be connected to a computer to sync or to a power supply (not included) to charge.
USB cable is included as well as a remote control and plastic inserts to fit a variety of available iPods®.
.
iPod® is a registered trademark of Apple Computer, Inc.
IRDS-2
USB DC
A/V
S-VIDEO
www.raxxess.com
24
NOTES
NOTES
25
FREE STANDING ECR RACKS
FREE STANDING ECR RACKS
10 Spaces
(17-1/2”)
C
optional shelf
ECR-WT/SHELF
29”
A
ECR-10-10CH
ECR-10-16WT ECR-10-16CH
ECRR-20-20CH ECRR-12-20CH
www.raxxess.com
26
GRAPHITE GROUP
GRAPHITE GROUP
GRF-20
GRF graphite series
Optional Front Door These knock down racks have both a three-quarter inch graphite
check top and simulated brushed aluminum sides. These racks
are easily assembled with the heavy duty hardware included
and are equipped with 11 gauge steel rack rail. Furniture grade
GRF-12 casters are standard. Framed silver laminated/plexi front doors
Raxxess Logo Panel
not included. are optional. Available in 12 nd 20 spaces.
options
• 12U Pullout rack
• Monitor Shelf
Maple
www.raxxess.com
28
ECONOMY RACKS
ECONOMY RACKS
ER-8
ER-12
ER-16
ER-20
ER-4
finish
ER economy racks Black Oak
A true work wise design, these knock down economy racks are black oak laminate
over 5/8” medium density fiberboard. They provide a very economical yet attractive Model Racking Height Depth Width Height
means for rack mounting gear in home studios or smaller installations. Assembly
hardware and 11-gauge steel rack rail are provided. Casters are optional. ER-4 7” - 4 spaces 15-7/8” 20-3/8” 8-5/8”
ER-6 10-1/2” - 6 spaces 15-7/8” 20-3/8” 12-1/8”
ER-8 14” - 8 spaces 15-7/8” 20-3/8” 15-5/8”
ER-8-18 14” - 8 spaces 17-7/8” 20-3/8” 15-5/8”
ERD economy rack door ER-10
ER-12
17-1/2” - 10 spaces
21” - 12 spaces
15-7/8”
15-7/8”
20-3/8”
20-3/8”
19-1/8”
22-5/8”
Attractive smoked 3/16” plexi or black ER-12-18 21” - 12 spaces 17-7/8” 20-3/8” 22-5/8”
perforated door to fit our economy ER-14 24-1/2” - 14 spaces 15-7/8” 20-3/8” 27-1/8”
racks. Textured powder coat finish with ER-16 28” - 16 spaces 15-7/8” 20-3/8” 29-5/8”
keyed lock. Mounts easily to rack edges ER-16-18 28” - 16 spaces 17-7/8” 20-3/8” 29-5/8”
with included wood screws. Comes in ER-20 35” - 20 spaces 15-7/8” 20-3/8” 36-5/8”
sizes to fit our ER-8, 12, 14, 16 or 20. ER-20-18 35” - 20 spaces 17-7/8” 20-3/8” 36-5/8”
ERD-P
ERS-18
Model Panel space Depth Height Height ER-12/8
T/B w/casters
ERS-10 17-1/2” - 10 spaces 12-1/2”/ 16-1/2” 20-3/8” 20-3/8” finish
ERS-18 31-1/2” 18 spaces 12-1/2”/18” 38-3/4” 41-11/16” Black Oak
ER-12/8 35” 20 spaces 8-5/8”/15-3/4” 39” 41-15/16”
ER-12/16 49” 28 spaces 8-5/8”/15-3/4” 53” 55-15/16” ER-12/16
System 1
shown
1 - ACD-42-56M center desk
2 - ASW-20-29M side wing racks
1 - RB-60M rack bridge
2 - RB-22M rack bridges
1 - KBS-2M
106”
RB-60
RB-22 RB-22
ACD-42-56
30” ASW-20-29 ASW-20-29
System 1
System 2
shown
1 - SCD-36B
2 - SSW-22/B side wing racks
1 - RB-36B rack bridge
2 - RB-22B rack bridge
1 - KBS-2 keyboard shelf
1 - CBS center bridge support
81”
RB-36B
RB-22B RB-22B
30”
SSW-22/B SCD-36B SSW-22/B
System 2
System 3
shown
1 - SCD-42M center desk
2 - SSW-22M side wing racks
1 - RB-60M rack bridge
81”
RB-60M
30”
SSW-22M SCD-42M SSW-22M
System 3
finishes
Ebony fleck
Maple
www.raxxess.com
30
CONFIG-U-RAXX SYSTEMS
CONFIG-U-RAXX SYSTEMS
The Config-u-raxx system is a line of components designed to meet the unique
requirements of production environments. It offers an array of desktop surfaces,
side wings and shelves, as well as add-ons such as doors, racks and keyboard
trays. Each component can be easily interfaced with any other component in the System 4
system, allowing for an almost endless variety of configurations.
shown
1 - CRND-B corner desk
2 - SSW-22B side wing racks
1 - RB-46B rack bridge
2 - RB-22B rack bridges
1 - SFD studio furniture door (optional)
approx.96”
RB-46B
ACD-42-56
RB-22 RB-22
SSW-22 SSW-22
optional studio furniture door (SFD)
30” System 4
all steel
Silver hammertone
60”
System 5 RB-46B
RB-60B
shown
30”
1 - SCD-42B straight center desk
SCD42B
1 - RB-46B rack bridge
1 - UCR-B under counter rack
System 5
Etude 55”
16” 30”
16”
Etude
features
• Melamine surfaces available in 2 colors -
ebony fleck & maple 16”
finishes
Ebony fleck
www.raxxess.com
31
CONFIG-U-RAXX SYSTEMS
CONFIG-U-RAXX SYSTEMS
side wings available with either melamine or steel side panels finishes
Ebony fleck
22” 22”
Maple
top top
30” view 30” view
shown
30” 30” CONFIG-U/CASTER
works with all components
20.0 30”
shown
shown SSW-22BS
SSW-22BS RB-22 (optional)
RB-22 (optional) SFD (optional)
30”
22”
30”
top
30” view
30”
22”
www.raxxess.com
32
CONFIG-U-RAXX SYSTEMS
CONFIG-U-RAXX SYSTEMS
ACD-30-45B angled center desk small ACD-42-56 angled center desk large CRND-B corner desk
Use RB-36, 46 or 60 with this desk Use RB-46 or 60 with this desk Use RB-36, 46 or 60 with this desk
shown with
RB-46B
shown with (optional)
shown with RB-60B (optional)
RB-46B (optional) KBS-2 (optional)
KBS-2 (optional)
56-1/2” 65”
45-1/2”
ACD-42-56 CRND
ACD-30-45 30” 31” 30” 30” corner desk
31”
31”
RB-46 14”
10
18” space
rack
shown
RB-22 SFD steel with plexi 10-9/16” 19-1/16”
RB-36 14” 14”
use with SCD-36 & CRND
keyboard shelves
Articulated keyboard shelfmount slides in & out, adjusts up & down, .
60”
tilts & swivels!
RB-60 14”
0.0
shown
KBS-1M for use
All shelves can be added to any with the CRND only.
desk unless otherwise stated.
24” 28”
Silver hammertone
22” 14” SFRK-4B
2” - 12”
www.raxxess.com
33
STORAGE
STORAGE
Media partitions
Media partitions are available for use with our SDR drawers, providing
neat and organized storage of audio cassettes, compact discs and
DVDs. The CDP and DVDP fit the SDR-4 drawers and hold 103
compact discs and 40 DVDs, respectively.
CDP
CSP
DL
FDI DL foam liner
Lines any ESD or SDR drawer to protect contents
PB project box
The PB-1 and PB-2 project boxes are of two piece, cold
rolled steel construction. Black baked enamel finish.
Available in one or two space configuration. Front to back
measures 6“.
finish
Black Liquidcoat
Media holders
Rackmount media holders include steel shelf with brushed black
anodized aluminum trim plate. Available for compact discs (RCD-4U,
holds 40 CDs), and DVDs (RDVD-5U, holds 25 DVDS).
RCD
RCD-CL
RDVD RDVD-CL
finish finish
Black Anodized Clear Anodized Aluminum
www.raxxess.com
34
STORAGE
STORAGE
ESD economy sliding drawer
Available in 2, 3 or 4 space versions. Fully enclosed construction is of 16-gauge steel with a
black semi-gloss finish. New 12” cabinet grade slides allow for full extension. Optional lock
available.
SDR-A
finish
Black powder coat
finish SDR
Clear Anodized Aluminum
finish
Black Anodized Aluminum
optional lock
Model Overall Overall Usable Usable
Height Depth Width Depth
A (A) (B) (C) (D)
Top View
www.raxxess.com
35
SHELVES
SHELVES
UTS-3
UTS-2
UNS
UNS universal rack shelf Model Depth Height Usable Capacity
1-3/4” One space, 14-gauge shelf has slotted- Width
pattern in bottom for mounting a variety of UNS-1 10” 1-3/4” 17-1/4” 20 lbs.
half-rack equipment. . Finished in durable
black baked enamel.
10”
17-1/4”
13-3/4”
SLE-1
SLE economy sliding shelf Model Shelf Size Height Capacity
supporting equipment up to 35 pounds. Ears
For WxD
attached to the rear frame allowing unit to be SLE-1 15-1/2” x 13-3/4” 1-3/4” 35 lbs.
secured to the back of any enclosed rack. 12-inch
sliders with nylon roller bearings allow for a smooth
1-3/4” sliding movement. Shelf is black melamine.
15-1/2”
1-3/4”
SLS-1
SLS-1 sliding shelf Model Shelf Size Height Capacity
Extra heavy duty shelf occupies just one rack WxD
space. Supports up to 100 pounds. Shelf is SLS-1 16” x 14-1/4” 1-3/4” 100 lbs.
14-gauge steel finished in black baked enamel.
Extra heavy-duty ball bearing sliders extend a
14-1/4” full 14”. Rear rack rail required.
16”
SLS-1.5
SLS 1.5 sliding shelf Model Shelf Size Height Capacity
Steel shelf measuring 17-1/2” W x 14-1/2” deep WxD
locks both in and out. Extending on 14 inch, full SLS-1.5 17-1/2” x 14-1/2” 2” 60 lbs.
extension, ball bearing sliders and occupying
2” one and a half rack spaces. SLS 1.5 is supported
14-1/2”
by an all steel frame and extension ears for rear
support. Finished in black liquid coat.
17-1/2”
SKRS-20
SKRS shelf Model Usable Height Usable Capacity
Shelf specifically designed to fit our Depth Width
20”
SKR series of racks. It provides secure SKRS-20 20” 1-1/2” 18-5/8” 250 lbs.
rackmounting for non-rackmount gear. SKRS-26 26” 1-1/2” 18-5/8” 250 lbs.
Its unique ability to use zero space, give SKRS-30 30” 1-1/2” 18-5/8” 250 lbs.
2”
extensive usable shelf area and provide
heavy duty weight capacity makes it a
18-5/8” winner. Finished in black liquid coat.
EXS-2
EXS extendable shelf Model Usable Height Usable Capacity
Combines heavy duty capacity (350lbs.) with Depth Width
rear support and is versatile enough to be EXS-2 21” 3-1/2” 17-1/4” 350lbs.
3-1/2” EXS-2-16 16” 3-1/2” 17-1/4” 550lbs.
used in all of our racks. It is fully vented and
extends 21” to 28” in front to rear mounting
21-28” 17-1/4” adjustment. Usable depth is 21”. Occupies 2
rack spaces. Finished in black liquid coat.
www.raxxess.com
36
SHELVES
SHELVES
Model Depth Height Usable Capacity WMS wall mount shelf WMS
QFPL-2
VPL-CL
AFG-CL1
AFG-CL2
SFT
www.raxxess.com
38
PANELS
PANELS
AFT aluminum flat panel
.125” aluminum; available in 1 through 4 rack space versions. Black
AFT
brushed anodized or clear finish.
AFT-CL
Speciality Panels
Constructed of 16-gauge cold rolled steel and flanged for strength; S12F
punched to accommodate 12 female XLR’s (S-12F), 12 male XLR’s (S-
12M), 6 male and 6 female XLR’s (S12H) and 16 1/4” connectors (S1625). S12H
S12M
S16.25
www.raxxess.com
39
PANELS
PANELS
LSCP-8
LSCP
LSC
HVP
HVP hinged vent panel
Hinged vent panels available in 2, 3, 4 or 6 rack spaces feature horizontal
ventilation slots for maximum airflow. Captive thumbscrews on one side,
hinged on the opposite side for easy access to space behind panel.
Constructed of 16-gauge steel black powder coat finish.
DCR-1x2
DCR decora panels
Mount Decora panels, available in a varitey of configurations,
into any 19 inch rack mount enclosure. Raxxess offers one space
DCR-1x4
and three space panels that can accommodate from one to six
Decora devices. Constructed from 16-gauge cold, rolled steel and
finished in a durable, black powder coat.
DCR-3x3
DCR-3x6
RME-12
RME-14
www.raxxess.com
40
MODULAR PANELS
MODULAR PANELS
banana module universal rca module
BAN-1A BAN-2A BAN-3A BAN-4A BAN-6A UN-2A UN-3A UN-4A UN-6A RCA-2A RCA-3A
Fits Dual Universal Banana jacks for speakers Fits XLR female, XLR male and Neutrik FDL, MDL, FP, MP Fits 3/8” RCA jacks
duplex module*
Fits Switchcraft, Neutrik FP, Cannon, LNEFP, EL-2-38A EL-2-56A EL-2-90A DP-1A DP-2A
MBP3
triple blank panel MCF-2
MP/Adapter
Adapts any single MCP
to a standard 1900 Box
MCF-3
MBP2 MCF-1
double blank panel
www.raxxess.com
41
ACCESSORIES
ACCESSORIES
POMT-ST POMT-6
This pop filter with steel clamp easily attaches to any microphone stand.
The gooseneck allows proper placement of 6 or 8” filter in front of
microphones.
RSG
RSG round speaker grills
Steel construction (0.47”); flat black finish, rubber vibration dampening
surround. Available 8”, 10”, 12”, 15” and 18”. CKW - Metal clamp kit for
mounting speaker grills. (sold separately)
CT cable ties
CT 100-4 CT 100-8R
4” cable ties; 100 pieces per bag; black. . 8” reusable cable ties; .
100 pieces per bag; black .
CT 100-8
8” cable ties; 100 pieces per bag; black .
CT
AR-5
AR-5 accessory riser
The AR-5 is a handy little device that mounts under an amplifier handle
or on a mic stand. It can act as a third hand or save valuable rack space.
Perfect for tuners or other small devices. Height 3”, Depth 5”, Width 5”
AMSS
Dimensions: 7-1/4”W x 5”H
AMSL
Dimensions: 7-1/2”W x 9-3/4”H
www.raxxess.com
42
HARDWARE
HARDWARE
*All rack screws have factory installed washers.
HPSW
HPSW header point screws
10-32 x 3/4” pan phillips header point machine screws with captive washers.
Time saving, eases thread starting. Available in 100 piece packages or 500
piece bag.
CPSW
CPSW captive washer screws
10-32 x 3/4” phillips pan head screws integrated with nylon cup washers save the user
the trouble of fumbling with separate parts allowing for faster installation of equipment.
Available in packages of 100 or 500.
PTSW
PTSW rack screws & washers
10-32 x 3/4” black oxide, phillips truss head screws with #10 nylon washers to prevent
scratching equipment. Attractively packaged for merchandising in packages of 25, 50
and 100. Bulk and quantity pricing available.
PNTX
PNTX-B
PNTX security screws
10-32 x 3/4” black oxide security pan head with washers. 50 or 100 piece packages.
When security is vital.
SDS
SDS square drive rack screws
When security is a concern. Pan head 10-32 x 3/4” long. 100 per bag with washers.
SDB
SDB square drive bit
To accommodate security rack screws.
STSW
STSW stainless steel screws
Stainless steel phillips truss head screw for use with clear anodized
products. Clear washers included.
STSW-25
SHWS
SHWS shoulder washers
10 washers sold in bags of 100. Used to isolate equipment from rack rail to eliminate
#
ground loop problems.
www.raxxess.com
43
NOTES NOTES
www.raxxess.com
44
NOTES
NOTES
www.raxxess.com
45
JUNE 2010
PRODUCT CATALOG
COMMERCIAL
RAXXESS | A Division of Milestone AV Technologies | www.raxxess.com
P 800.398.7299 | F 877.894.6918 | raxxess@milestone.com
©2010 Milestone AV Technologies, a Duchossois Group Company. 900161C 6/10. Raxxess is a trademark of
Milestone AV Technologies. All other brand names or marks are used for identification purposes and are trademarks
of their respective owners. All patents are protected under existing designations. Other patents pending.