Professional Documents
Culture Documents
The essence of water cannot be overemphasized in the life of mankind. It serves multipurpose
and diverse functions in human life, therefore it is important that it is pure and potable. In order
to appreciate this most important process of water purification, the visit to the CLEANSE water
factory was made, the process of water manufacture process starts from the harnessing of the
The borehole’s pipe runs water by a pipe to the raw water store. The water is thenpassed
to the sand filter when the water pass through filtration by sand. The filtered water runs through
another pipe to the carbon filter. The pumping machine then runs the carbon filtered water to
the treatment water. The treated water is pumped into the production room. The water passes
through the candle filter to the ultraviolet light where the final pure water is achieved and the
water is passed to the automated machine that produces the sealed water where it is packaged.
In order to conform with NAFDAC (National Agency for Food, Drug Administration
and Control) rules, certain measures are implemented such as the use of bore hole water in
preference to tap water as instructed by NAFDAC. Also building enclosure such as a fence is
installed.
The buildings surroundings must be clean and free from hindering particles and
dismemebered window frame is not allowed. PVC ( poly vinyl chloride) ceiling is to be used
instead of asbestos. Also a minimum of 5- rooms is required in the building. The rooms are
;production room, cloak room, finished production room, office and raw material room. A tiled
floorfinish is also to be used as instructed by NAFDAC. All these measures were implemented
The water is pumed into the storage tank elevated by situating it on a slab. Through series of
well arranged pipes, the water flows to the sand filter from which it flows to the carbon filter.
The water is then passed through the candle filter to the sealing machin