Professional Documents
Culture Documents
Huawei E5776
◆Type of Wireless LAN
IEEE802.11b/g/n
◆Connection Speed (Best effort)
Download speed up to 150Mbps
Upload speed up to 50Mbps
◆Operation Time
Approximately 10 hours
◆Battery Charge Time
Approximately 4 hours
◆Simultaneous Connection
Up to 10 devices
To the extent possible, please carry this product with you on board
the aircraft, because it could be damaged by shock and extreme
changes in temperature or air pressure.
Contents
TECHNICAL SPECIFICATIONS 1 HOW TO USE 5
SUPPORT DESK 2 CHARGING BATTERY 6
READ ME FIRST 3 TROUBLESHOOTING 7
OVERVIEW AND FUNCTION 4
If there is no data transfer for a while, data function turns OFF automatically.
Press power button to turn ON data function. Please turn OFF power button in order
to save battery.
1
24 HOUR SUPPORT DESK
◇From overseas
TEL : +81-3-3239-3422 (Not toll free)
◇From Japan
TEL : 03-3239-3422 (Not toll free)
◇From 050 plus (Domestic・Overseas common)
TEL : 050-3538-4682 (From 050 plus Not toll free)
050 plus is a service provided by NTT Communications Corporation.
050 plus must be operated under internet connection environment.
◇E-mail : tss@telecomsquare.co.jp
RETURN BY DELIVERY
If you cannot drop off the device at our counter, please post the device to
the below address.
Telecom Square, Inc. Narita Logistics Center
Keiseinarita East Exit Morita Bldg.5F, 959 Hanazakicho, Narita-shi, Chiba
286-0033, Japan
If the extension period is within 1 week, you need not contact us in advance.
2
READ ME FIRST
【Please turn off data roaming】
Please turn OFF “data roaming” if you’re using iPhone or other smartphones.
If “data roaming” is ON, you may be charged for expensive data roaming fee.
iPhone・iPad (iOS 7 later)
[Setting] ▶ [Cellular] ▶ [Data roaming]
android (android 4.0 later)
[Settings] ▶ [More] ▶[Mobile networks] ▶[Data roaming]
If automatic data updates is ON, it may incur large amount of data transfer and
reaches FUP limit. Please check the settings and turn off automatic data updates or
cloud updates of OS, application, iCloud, Google drive, Dropbox, etc.
About 20,000 times About 400 times About 100 times About 2 mins
About 33 mins About 3 mins About 20,000 times About 167 mins
3
OVERVIEW AND FUNCTION
Power Key
Press and hold ON / OFF
Connector
<Normal Display>
Signal Strength
⇔ Strong ⇔ Weak / Out of service
Network connection
It will switch to 3G/2G network
if 4G network is unavailable.
Transmission speed is slower
compared with 4G network.
Connected to Internet
Connected
Battery level
⇔ Hight ⇔ Low
4
HOW TO USE
Press and hold the power key for about 3 seconds to turn on Wi-Fi router.
Wi-Fi router starts up in about 1 minute.
To connect Wi-Fi, follow the steps below.
[SSID] and [WPA KEY] are on the back of the Wi-Fi router.
【 iPhone・iPad 】
[Settings]▶ [Wi-Fi] ▶ [ON]▶
Select network name on the list.
▶ Enter WPA KEY ▶ [Join]
【 android Smartphone・Tablet 】
[Setting] ▶ [Wi-Fi] ▶ [ON]
▶ Select network name on the list.
▶ Enter WPA KEY ▶ [Connect]
【 Windows 7 】
Click the network icon, shown on the bottom.
▶ Select network name on the list.
▶ Enter WPA KEY ▶ [OK]
Delete Password
If you mistype the password, please delete according to the below procedure.
◆iPhone
[Settings] ▶ [Wi-Fi] ▶ CHOOSE A NETWORKS ▶ [Forget this Networks] ▶ [Forget]
◆android
[Settings] ▶ [Wi-Fi] ▶ Select the SSID ▶ [FORGET]
◆Windows7
[Start] ▶ [Control Panel] ▶ [Network and Internet]
▶ [Open network and Sharing Center] ▶ [Manage wireless networks]
Select the SSID ▶ [Delete]
5
CHARGING BATTERY
Charge battery when the power is turned off.
Flashing battery mark is fully charged when it
stops.
6
TROUBLESHOOTING
Wi-Fi router does not work properly.
Ex) SSID is not displayed/Security is deactivated/Cannot connect to the Wi-Fi Network
/Cannot connect to the internet/Cannot turn on /Cannot charge etc...
1. Restart
Reboot the device .
Display is shown, but is unable to control the device.
Please press and hold the power button for over 10 seconds to reboot.
2. Cannot connect to the Wi-Fi network
Check the Wi-Fi function of your device whether is turned [ON].
“Wi-Fi” connection is the connection between Wi-Fi router and PC/smartphone.
When Wi-Fi connection is established, number of connected device will be shown on
the screen. If there is no connection, “0” is shown.
5. Reset
Press and hold the Reset button until the display
screen turns off. The Mobile Wi-Fi is then
restored to its factory settings.