Professional Documents
Culture Documents
WCDMA RAN
URA-Cell Update Feature Parameter
Description
Issue 01
Date 2013-09-30
Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 1/31
2/6/2018 URA-Cell Update Feature Parameter Description
Contents
1 About This Document
1.1 Scope
1.2 Intended Audience
1.3 Change History
2 Overview
3 URA/Cell Update Principles
3.1 Types of URA/Cell Update
3.1.1 Periodical URA/Cell Update
3.1.2 URA/Cell Update due to Cell Reselection
3.1.3 Cell Update due to Paging Response
3.1.4 Cell Update due to Uplink Data Transmission
3.1.5 Cell Update due to Radio Link Failure
3.1.6 Cell Update due to Re-entering Service Area
3.1.7 Cell Update due to RLC Unrecoverable Error
3.1.8 Cell Update due to MBMS PtP RB Request
3.1.9 Cell Update due to MBMS Reception
3.2 Signaling Procedure of URA/Cell Update
3.2.1 Signaling Procedure of URA Update
3.2.2 Signaling Procedure of Cell Update
4 Engineering Guidelines
4.1 WRFD-010801 Intra RNC Cell Update
4.1.1 Requirements
4.1.2 Activation
4.1.3 Activation Observation
4.1.4 Deactivation
4.1.5 MML Command Examples
4.2 WRFD-010802 Inter RNC Cell Update
4.2.1 Requirements
4.2.2 Activation
4.2.3 Activation Observation
4.2.4 Deactivation
4.2.5 MML Command Examples
4.3 WRFD-010901 Intra RNC URA Update
4.3.1 Requirements
4.3.2 Activation
4.3.3 Activation Observation
4.3.4 Deactivation
4.3.5 MML Command Examples
4.4 WRFD-010902 Inter RNC URA Update
4.4.1 Requirements
4.4.2 Activation
4.4.3 Activation Observation
4.4.4 Deactivation
4.4.5 MML Command Examples
5 Parameters
6 Counters
7 Glossary
8 Reference Documents
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 2/31
2/6/2018 URA-Cell Update Feature Parameter Description
This section provides information about the changes in different document versions. There are two types of changes, which are defined as follows:
Feature change
Changes in features of a specific product version
Editorial change
Changes in wording or addition of information that was not described in the earlier version
01 (2013-09-30)
Compared with Issue 01 (2012-07-20) of RAN14.0, Issue 01 (2013-09-30) of RAN15.0 includes the following changes.
Editorial change Added 3GPP reference information to the following sections: None
3.1.1 Periodical URA/Cell Update
3.2 Signaling Procedure of URA/Cell Update
Basic Signaling Procedure of URA Update under section 3.2.1 Signaling
Procedure of URA Update
2 Overview
The URA is the UTRAN registration area. A URA consists of multiple cells. URA update happens only in the URA_PCH state. The purpose of making a UE switching to the
URA_PCH state is to prevent a UE that has no data to transmit (especially those moving at a high speed) from frequently initiating cell reselection. The functions and basic
processes of cell update and URA update are similar. The only difference lies in the range of triggering the update. URA/cell update is used by the UE to report the location
information and status of the UE. The reporting method is classified into two types: periodical URA/cell update and event-triggered URA/cell update. URA update occurs when the
UE is in URA_PCH state, and cell update occurs when the UE is in CELL_PCH or CELL_FACH state.
Additionally, cell update is also used to perform some other functions, such as UE state transition and radio link re-establishment on the DCH. As a result, cell update may happen
when the UE is in CELL_DCH, CELL_FACH, CELL_PCH, or URA_PCH state.
URA/cell update enables the UTRAN to manage the UE behaviors. It can be applied to mobility management, cell reselection, and paging procedures. URA/cell update has the
following functions:
The URA update:
Enables the UTRAN to periodically monitor the status of the UE in URA_PCH state.
Enables the UTRAN to know in time the URA where the UE is camping if URA changes after cell reselection.
Enables the UE to retrieve a new URA identity after reselecting a cell that does not belong to the currently assigned URA.
Enables the UTRAN to periodically monitor the status of the UE in CELL_FACH or CELL_PCH state.
Enables the UTRAN to know the cell where the UE is camping after the UE in CELL_PCH, URA_PCH or CELL_FACH state re-enters the service area.
Enables the UTRAN to know in time the new cell of UE after cell reselection.
Enables the UE to transit from CELL_PCH or URA_PCH state to CELL_FACH state when the network is paging the UE.
Enables the UE to require the uplink data transmission to transit from CELL_PCH or URA_PCH state to CELL_FACH state.
Enables the UE that is out of synchronization on the dedicated radio link channel to re-establish a new dedicated channel.
Enables the RNC to release the RRC connection of the UE or to re-establish an RLC entity in case of RLC unrecoverable error.
Enables the UTRAN to be informed about the UEs that are in the URA_PCH, CELL_PCH, or CELL_FACH state and are to receive MBMS data.
Enables the UTRAN to count the number of UEs that are in the URA_PCH, CELL_PCH, and CELL_FACH states and are to receive MBMS data.
Enables the UEs to request the MBMS PTP RB setup when the UEs are in CELL_PCH, URA_PCH, or CELL_FACH state.
For details about SIB1, see section 8.1.1.6.1 "System Information Block type 1" in 3GPP TS 25.331 V6.6.0.
For details about the UTRAN MOBILITY INFO CONF message, see section 10.2.63 "UTRAN MOBILITY INFORMATION CONFIRM" in 3GPP TS 25.331 V6.6.0.
Accordingly, the RNC starts an internal timer for the UE in CELL_FACH, CELL_PCH or URA_PCH state. The value of this timer is greater than that of T305. When the RNC
receives a URA/CELL UPDATE message with the cause "periodical URA/cell update", it restarts the internal timer. If the RNC does not receive a URA/CELL UPDATE message
before expiry of the internal timer, the RNC decides that the UE is out of service, and then initiates the RRC connection release procedure.
NOTE:
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 3/31
2/6/2018 URA-Cell Update Feature Parameter Description
If a UE in URA_PCH state reselects a new cell of a different URA, the UE performs URA update with the cause "change of URA".
Upon reception of a URA/CELL UPDATE message with the cause "Change of URA/Cell reselection", the RNC updates the URA/cell where the UE camps.
The URA ID can be assigned to a cell through the parameter URAID(BSC6900,BSC6910). The URA ID should be created through the MML command ADD UURA before being
assigned to a cell.
The main parameters involved in the cell reselection algorithm when the UE is in CELL_FACH, CELL_PCH, or URA_PCH state are listed as follows:
If you want to set cell reselection parameters for each UE state (URA_PCH, CELL_PCH, CELL_FACH) respectively, you can use the MML command ADD UCELLSELRESEL to
set them.
For details about the cell reselection procedure, see "Cell Reselection" in the UE Behaviors in Idle Mode Feature Parameter Description.
On some occasions, the UE in Cell_PCH state performs cell reselection frequently and initiates the cell update procedure frequently. When the RNC detects this status of the UE, it
enables the UE to transfer to the URA_PCH state through the message "CELL UPDATE CONFIRM".
If the number of cell update procedures initiated by the UE within an evaluation period exceeds the threshold of cell reselection, the RNC judges that the UE is in frequent cell
reselection state.
1. If the UE in CELL_DCH state detects that the criteria for radio link downlink failure are met, the UE performs cell update with the cause "radio link failure".
2. Upon reception of a CELL UPDATE message with this cause, the RNC performs the following operations:
Deletes the current radio link.
Establishes a new radio link.
Sends a CELL UPDATE CONFIRM message to the UE with the parameters of the new radio link to the cell that receives the CELL UPDATE message.
The criteria for radio link failure involve some timers and constants. A timer (T313) is started after the UE detects a certain number (N313) of consecutive "out of sync" indications
from layer 1 (L1). If there is no enough number (N315) of consecutive "in sync" indications received from L1 before the timer (T313) expires, the UE considers radio link failure.
Related parameters are as follows:
1. The UE sends the RNC a URA UPDATE message with either of the following update causes in the "URA update cause" information element (IE): "periodical URA
update" or "change of URA".
2. The RNC responds to the "URA update cause" IE and then sends a URA UPDATE CONFIRM message to the UE.
The RNC performs different operations for different URA update causes. For details about these operations, see section 8.3.1.5 "Reception of an CELL UPDATE/URA
UPDATE message by the UTRAN" in 3GPP TS 25.331 V6.6.0.
Figure 3-2 shows the signaling procedure of the inter-RNS URA update with SRNS relocation from RNC 1 to RNC 2.
Figure 3-2 Signaling procedure of URA update with SRNS relocation
The UE in URA_PCH state establishes an RAB on RNC 1. In this procedure, RNC 1 is the Serving RNC (SRNC) and RNC 2 is the Drift RNC (DRNC).
The signaling procedure is as follows:
1. The UE in URA_PCH state sends RNC 2 a URA UPDATE message after URA reselection.
2. The RNC 2 receives the URA UPDATE message from CCCH. Then, RNC 2 sends RNC 1 an UPLINK SIGNALLING TRANSFER INDICATION message, which
includes target RNC-ID, allocated C-RNTI, and D-RNTI.
3. RNC 1 sends the CN a RELOCATION REQUIRED message, requesting SRNS relocation.
4. The CN sends a RELOCATION REQUEST message to RNC 2.
5. RNC 2 prepares L2 resources for RNC 1 relocation and then sends a RELOCATION REQUEST ACKNOWLEDGE message to the CN.
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 5/31
2/6/2018 URA-Cell Update Feature Parameter Description
6. The CN sends RNC 1 a RELOCATION COMMAND message, notifying RNC 1 that SRNS relocation starts.
7. RNC 1 completes related preparations such as stopping signaling and traffic RLCs. Then, RNC 1 sends a RELOCATION COMMIT message to RNC 2.
8. RNC 2 sends the CN a RELOCATION DETECT message, notifying the CN that the relocation starts. Then, RNC 2 performs related operations such as L2
configuration.
9. RNC 2 sends the UE a URA UPDATE CONFIRM message in the new cell. The message includes the old S-RNTI and SRNC ID as well as the new S-RNTI, and C-
RNTI.
10. The UE sends a RRC message UTRAN MOBILITY INFORMATION CONFIRM to RNC 2.
11. RNC 2 sends a RELOCATION COMPLETE message to the CN.
12. RNC 2 sends the UE a UE CAPABILITY ENQUIRY message, querying the capability information about the UE.
13. The UE sends RNC 2 a UE CAPABILITY INFORMATION message, including the capability information about the UE.
14. RNC 2 receives the UE CAPABILITY INFORMATION message and sends a UE CAPABILITY INFORMATION CONFIRM message to the UE.
15. RNC 2 sends the UE a UTRAN MOBILITY INFORMATION message, notifying the UE of the new UTRAN information.
16. The UE sends a UTRAN MOBILITY INFORMATION CONFIRM message to RNC 2.
17. The CN sends RNC 1 an IU RELEASE COMMAND message, requesting RNC 1 to release the Iu interface resource related to this UE.
18. RNC 1 sends an IU RELEASE COMPLETE message to the CN.
1. The UE sends the RNC a CELL UPDATE message with a cause in the "cell update cause" IE.
2. The RNC performs the corresponding processing, and then sends the UE a CELL UPDATE CONFIRM message.
3. Based on the information included in a CELL UPDATE CONFIRM message, the UE determines whether to respond to the message. For details about IEs included in a
CELL UPDATE CONFIRM message, see section 8.3.1.6 "Reception of the CELL UPDATE CONFIRM/URA UPDATE CONFIRM message by the UE" in 3GPP TS
25.331 V6.6.0. The UE may respond with any of the following messages:
UTRAN MOBILITY INFORMATION CONFIRM
PHYSICAL CHANNEL RECONFIGURATION COMPLETE
TRANSPORT CHANNEL RECONFIGURATION COMPLETE
RADIO BEARER RECONFIGURATION COMPLETE
RADIO BEARER RELEASE COMPLETE
If the UE changes from CELL_PCH state to URA_PCH state through cell update, the procedure is as follows:
1. The UE is in CELL_PCH state and sends a CELL UPDATE message with the cause "cell reselection".
2. If the RNC decides to switch the state of this UE from CELL_PCH to URA_PCH, the RNC sends the CELL UPDATE CONFIRM message to the UE and sets the "RRC
State Indicator" IE as URA_PCH.
3. The UE enters the URA_PCH state upon reception of the CELL UPDATE CONFIRM message.
Figure 3-4 shows the signaling procedure of the inter-RNS cell update with SRNS relocation from RNC 1 to RNC 2.
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 6/31
2/6/2018 URA-Cell Update Feature Parameter Description
Figure 3-4 Signaling procedure of cell update with SRNS relocation
The UE sets up an RRC connection on RNC 1. The UE is in CELL_FACH or CELL_PCH state. In this case, RNC 1 is the serving RNC (SRNC) and RNC 2 is the drift RNC
(DRNC).
The signaling procedure is described as follows:
1. The UE reselects a cell under RNC 2 and sends RNC 2 a CELL UPDATE message.
2. RNC 2 allocates a C-RNTI and a D-RNTI for the UE. RNC 2 forwards the CELL UPDATE message received from the CCCH to RNC 1 through an UPLINK
SIGNALLING TRANSFER INDICATION message.
3. RNC 1 sends the CN a RELOCATION REQUIRED message, requesting SRNS relocation.
4. The CN sends a RELOCATION REQUEST message to RNC 2.
5. RNC 2 prepares L2 resources for RNC 1 relocation, and then sends the CN a RELOCATION REQUEST ACKNOWLEDGE message.
6. The CN sends RNC 1 a RELOCATION COMMAND message, notifying RNC 1 that SRNS relocation starts.
7. RNC 1 completes related preparations such as stopping signaling and traffic RLCs, and then sends RNC 2 a RELOCATION COMMIT message, requesting RNC 2 to
start the relocation.
8. RNC 2 sends the CN a RELOCATION DETECT message, notifying the CN that the relocation starts. Then, RNC 2 performs related operations such as L2
configuration.
9. RNC 2 sends the UE a CELL UPDATE CONFIRM message in the new cell, including the new C-RNTI and S-RNTI.
10. The UE sends RNC 2 a RRC message PHYSICAL CHANNEL RECONFIGURATION COMPLETE, confirming that the relocation succeeds.
11. RNC 2 sends a RELOCATION COMPLETE message to the CN.
12. RNC 2 sends the UE a UE CAPABILITY ENQUIRY message, querying the capability information about the UE.
13. The UE sends RNC 2 a UE CAPABILITY INFORMATION message, including the capability information about the UE.
14. RNC 2 receives the UE CAPABILITY INFORMATION message and sends a UE CAPABILITY INFORMA CONFIRM message to the UE.
15. RNC 2 sends the UE a UTRAN MOBILITY INFORMATION message, notifying the UE of the new UTRAN information.
16. The UE sends a UTRAN MOBILITY INFORMATION CONFIRM message to RNC 2.
17. The CN sends RNC 1 an IU RELEASE COMMAND message, requesting RNC 1 to release the Iu interface resource related to this UE.
18. RNC 1 sends the CN an IU RELEASE COMPLETE message.
Figure 3-5 shows the signaling procedure of cell update due to a downlink radio link failure.
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 7/31
2/6/2018 URA-Cell Update Feature Parameter Description
Figure 3-5 Example signaling procedure of cell update due to a downlink radio link failure
When receiving a cell update message, the RNC establishes a new RL and deletes the old RL. The new RL is specified in the cell update message.
If the first attempt to re-establish the RL fails, the RRC connection will be released.
This procedure is supported for both CS and PS RAB.
For PS RAB, this procedure is supported for both DCH and HSDPA bearer.
More detailed description of this procedure is as follows:
1. The UE initiates the re-establishment of the RRC connection in the new cell by sending a CELL UPDATE message on the CCCH.
2. The RNC allocates radio resources in the new cell and sends an NBAP message RADIO LINK SETUP REQUEST to the new NodeB.
3. The NodeB allocates resources and responds with an NBAP message RADIO LINK SETUP RESPONSE.
4. The RNC initiates the setup of Iub data transport bearer by using the Access Link Control Application Protocol (ALCAP) protocol.
5. The RNC sends the old NodeB a RADIO LINK DELETION REQUEST message to release the old Iub radio link.
6. Upon releasing the old Iub radio link, the old NodeB sends the RNC a RADIO LINK DELECTION RESPONSE message.
7. The RNC initiates the release of Iub data transport bearer with the old NodeB by using the ALCAP protocol.
8. The RNC prepares a CELL UPDATE CONFIRM message and sends it to the UE on the DCCH.
9. The UE re-establishes radio connection in the new cell and sends the PHYSICAL CHANNEL RECONFIGURATION COMPLETE, RADIO REARER
RECONFIGURATION COMPLETE, RADIO BEARER RELEASE COMPLETE, or TRANSPORT CHANNEL RECONFIGURATION COMPLETE message to the RNC.
Step 4 through step 7 are necessary only when ATM transmission is used over the Iub interface.
4 Engineering Guidelines
4.1.1 Requirements
Dependencies on Hardware
This feature does not have any special requirements for hardware.
Dependencies on Other Features
This feature does not depend on other features.
License
This feature is not under license control.
4.1.2 Activation
1. Run the RNC MML command SET UCORRMALGOSWITCH (CME single configuration: UMTS Radio Global Configuration Express > Connection_Oriented RRM
Switch Configuration > Connection Oriented Algorithm Switches; CME batch modification center: Modifying RNC Parameters in Batches) to turn on the RNC-oriented
PS BE service state transition switch.
2. Run the RNC MML command SET UUESTATETRANSTIMER (CME single configuration: UMTS Radio Global Configuration Express > UE State Transition Parameter
Configuration > RNC StateTrans Timer Parameters; CME batch modification center: Modifying RNC Parameters in Batches) to set the parameters BE DCH to FACH
Transition Timer[s] and BE FACH or E_FACH to PCH Transition Timer[s] to 30s and 60s respectively.
3. Run the RNC MML command SET UPSINACTTIMER (CME single configuration: UMTS Radio Global Configuration Express > PS Permanent Online Detection Timer
Configuration > PS User Inactive Detecting Timer; CME batch modification center: Modifying RNC Parameters in Batches) to set inactivity detection timers for PS
services.
4. Run the RNC MML command SET UCONNMODETIMER (CME single configuration: UMTS Radio Global Configuration Express > UE Timers and Constants
Configuration > UE Timers And Constants in Connected Mode; CME batch modification center: Modifying RNC Parameters in Batches) to set the periodic cell update
timer to 5 minutes.
5. Set CELL1 and CELL2 of the RNC as intra-frequency neighboring cells. For details, see the BSC6900 UMTS Initial Configuration Guide or BSC6910 UMTS Initial
Configuration Guide.
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 8/31
2/6/2018 URA-Cell Update Feature Parameter Description
1. Log on the RNC LMT, click Trace > UMTS Services, and then double-click Uu Interface Trace. The Uu Interface Trace dialog box is displayed.
2. Set parameters in the areas Cell Config, Uu Message Type, and Save File. Then, click Submit.
3. Keep the UE in idle mode in CELL1.
4. On the HLR, set the PS service type to background or interactive.
5. Establish an R99 PS service on the UE. The RRC_RB_SETUP message should be displayed in trace data, and the value of the rrc-stateindicator IE should be
CELL_DCH.
6. Do not send any data from UE for 30 seconds. Then, the network side should perform UE transition to CELL_FACH state through the RRC_RB_RECFG message, and
the value of the rrc-stateindicator IE should be CELL_FACH.
7. Cause the UE to reselect a new cell so as to trigger cell update. The UE should send the RRC_CELL_UPDATE message to the RNC, with the cell update cause of cell
reselection, and the RNC should send the RRC_CELL_UPDATE_CONFIRM message to the UE.
1. Log on the RNC LMT, click Trace > UMTS Services, and then double-click Uu Interface Trace. The Uu Interface Trace dialog box is displayed.
2. Keep the UE in idle mode in CELL1.
3. On the HLR, set the PS service type to background or interactive.
4. Establish an R99 PS service on the UE. The RRC_RB_SETUP message should be displayed in trace data, and the value of the rrc-stateindicator IE should be
CELL_DCH.
5. Do not send any data from UE for 30 seconds. Then, the network side should perform UE transition to CELL_FACH state through the RRC_RB_RECFG message, and
the value of the rrc-stateindicator IE should be CELL_FACH.
6. Do not send any data from UE1 for another while. Then, the network side should perform UE transition to CELL_PCH state through the RRC_RB_RECFG message,
and the value of the rrc-stateindicator IE should be CELL_PCH.
7. Use the UE to transmit data so as to trigger cell update. The UE should send the RRC_CELL_UPDATE message to the RNC, with the cell update cause of
uplinkdatatransmission, and the RNC should send the RRC_CELL_UPDATE_CONFIRM message to the UE.
1. Run the RNC MML command SET UUESTATETRANSTIMER (CME single configuration: UMTS Radio Global Configuration Express > UE State Transition Parameter
Configuration > RNC StateTrans Timer Parameters; CME batch modification center: Modifying RNC Parameters in Batches) to set the parameter BE FACH or
E_FACH to PCH Transition Timer[s] to 65535.
For example,
SET UUESTATETRANSTIMER: BeF2PStateTransTimer=65535;
2. Log on the RNC LMT, click Trace > UMTS Services, and then double-click Uu Interface Trace. The Uu Interface Trace dialog box is displayed.
3. Keep the UE in idle mode in CELL1.
4. On the HLR, set the PS service type to background or interactive.
5. Establish an R99 PS service on the UE. The RRC_RB_SETUP message should be displayed in trace data, and the value of the rrc-stateindicator IE should be
CELL_DCH.
6. Do not send any data from UE for 30 seconds. Then, the network side should perform UE transition to CELL_FACH state through the RRC_RB_RECFG message, and
the value of the rrc-stateindicator IE should be CELL_FACH.
7. Do not send any data from the UE for five minutes so as to trigger periodic cell update. The UE should send the RRC_CELL_UPDATE message to the RNC, with the
cell update cause of periodiccellupdate, and the RNC should send the RRC_CELL_UPDATE_CONFIRM message to the UE.
4.1.4 Deactivation
None
4.2.1 Requirements
Dependencies on Hardware
This feature does not have any special requirements for hardware.
Dependencies on Other Features
This feature does not depend on other features.
License
This feature is not under license control.
Others
The neighbouring RNC should support this feature.
4.2.2 Activation
1. Run the RNC MML command SET UCORRMALGOSWITCH (CME single configuration: UMTS Radio Global Configuration Express > Connection_Oriented RRM
Switch Configuration > Connection Oriented Algorithm Switches; CME batch modification center: Modifying RNC Parameters in Batches) to turn on the RNC-oriented
PS BE service state transition switch.
2. Run the RNC MML command SET UUESTATETRANSTIMER (CME single configuration: UMTS Radio Global Configuration Express > UE State Transition Parameter
Configuration > RNC StateTrans Timer Parameters; CME batch modification center: Modifying RNC Parameters in Batches) to set the parameter BE DCH to FACH
Transition Timer to 30s.
3. Run the RNC MML command SET UPSINACTTIMER (CME single configuration: UMTS Radio Global Configuration Express > PS Permanent Online Detection Timer
Configuration > PS User Inactive Detecting Timer; CME batch modification center: Modifying RNC Parameters in Batches) to set inactivity detection timers for PS
services.
4. Configure intra-frequency neighboring cells controlled by different RNCs. For details, see the Configuring an Intra-Frequency Neighboring Cell.
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 9/31
2/6/2018 URA-Cell Update Feature Parameter Description
5. Run the RNC MML command MOD UNRNC (CME single configuration: IUR Configuration Express > Neighbouring RNC > Neighboring RNC; CME batch modification
center: not supported) to set the parameter IUR CCH support flag to YES.
NOTE:
IUR CCH support flag is also turned on neighboring RNC.
1. Log on the RNC LMT, click Trace > UMTS Services, and then double-click Uu Interface Trace. The Uu Interface Trace dialog box is displayed.
2. Set parameters in the areas Cell Config, Uu Message Type, and Save File. Then, click Submit.
3. Keep the UE in idle mode in CELL.
4. On the HLR, set the PS service type to background or interactive.
5. Establish an R99 PS service on the UE. The RRC_RB_SETUP message should be displayed in trace data, and the value of the rrc-stateindicator IE should be
CELL_DCH.
6. Do not send any data from UE for 30 seconds. Then, the network side should perform UE transition to CELL_FACH state through the RRC_RB_RECFG message, and
the value of the rrc-stateindicator IE should be CELL_FACH.
7. Cause the UE to perform cell reselection from local cell to intra-frequency neighboring cell so as to trigger cell update. The UE should send the RRC_CELL_UPDATE
message to neighboring RNC, with the cell update cause of cell reselection, and local RNC should send the RRC_CELL_UPDATE_CONFIRM message to the UE.
4.2.4 Deactivation
This feature does not need to be deactivated.
4.3.1 Requirements
Dependencies on Hardware
This feature does not have any special requirements for hardware.
Dependencies on Other Features
This feature does not depend on other features.
License
This feature is not under license control.
4.3.2 Activation
1. Run the RNC MML command SET UCORRMALGOSWITCH (CME single configuration: UMTS Radio Global Configuration Express > Connection_Oriented RRM
Switch Configuration > Connection Oriented Algorithm Switches; CME batch modification center: Modifying RNC Parameters in Batches) to select
DRA_PS_BE_STATE_TRANS_SWITCH from the Dynamic Resource Allocation Switch drop-down list to turn on the RNC-oriented PS BE service state transition
switch.
2. Optional: Run the RNC MML command SET UCORRMALGOSWITCH (CME single configuration: UMTS Radio Global Configuration Express > Connection_Oriented
RRM Switch Configuration > Connection Oriented Algorithm Switches; CME batch modification center: Modifying RNC Parameters in Batches). In this step, select the
DRA_F2U_SWITCH check box under the parameter Dynamic Resource Allocation Switch to enable state transition from CELL_FACH to URA_PCH directly.
3. Run the RNC MML command SET UUESTATETRANSTIMER (CME single configuration: UMTS Radio Global Configuration Express > UE State Transition Parameter
Configuration > RNC StateTrans Timer Parameters; CME batch modification center: Modifying RNC Parameters in Batches) to set the Cell Reselection Timer, BE
DCH to FACH Transition Timer, and BE FACH or E_FACH to PCH Transition Timer parameters to 60s, 10s, and 10s respectively.
4. Run the RNC MML command SET UPSINACTTIMER (CME single configuration: UMTS Radio Global Configuration Express > PS Permanent Online Detection Timer
Configuration > PS User Inactive Detecting Timer; CME batch modification center: Modifying RNC Parameters in Batches) to set inactivity detection timers for PS
services.
5. Run the RNC MML command SET UCONNMODETIMER (CME single configuration: UMTS Radio Global Configuration Express > UE Timers and Constants
Configuration > UE Timers And Constants in Connected Mode; CME batch modification center: Modifying RNC Parameters in Batches) to set the periodic cell update
timer to 5 minutes.
6. Configure intra-frequency neighboring cells. For details, see the BSC6900 UMTS Initial Configuration Guide or BSC6910 UMTS Initial Configuration Guide.
1. Log on the RNC LMT, click Trace > UMTS Services, and then double-click Uu Interface Trace. The Uu Interface Trace dialog box is displayed.
2. Set parameters in the areas Cell Config, Uu Message Type, and Save File. Then, click Submit.
3. Keep the UE in idle mode in CELL1.
4. On the HLR, set the PS service type to background or interactive.
5. Establish an R99 PS service on the UE. The RRC_RB_SETUP message should be displayed in trace data, and the value of the rrc-stateindicator IE should be
CELL_DCH.
6. Do not send any data from UE for 30 seconds. Then, the network side should perform UE transition to CELL_FACH state through the RRC_RB_RECFG message, and
the value of the rrc-stateindicator IE should be CELL_FACH.
7. When the DRA_F2U_SWITCH switch is on or off, the state transition of UE is different.
If the switch is off: Do not send any data from the UE for another while. Then, the network side should perform UE transition to CELL_PCH state through the
RRC_RB_RECFG message, and the value of the rrc-stateindicator IE should be CELL_PCH. Make the UE perform a cell reselection between CELL1 and
CELL2. Make UE1 perform another cell reselection after the Cell Reselection Timer[s] expires. Search for the last RRC_CELL_UPDATE_CONFIRM
message in trace data. The value of the rrc-stateindicator IE should be URA_PCH.
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 10/31
2/6/2018 URA-Cell Update Feature Parameter Description
If the switch is on: Do not send any data from the UE for another while. Then, the network side should perform UE transition to URA_PCH state through the
RRC_RB_RECFG message, and the value of the rrc-stateindicator IE should be URA_PCH.
8. Keep the UE in URA_PCH state. Perform another cell reselection between CELL1 and CELL2 so as to trigger URA update. The UE should send the
RRC_URA_UPDATE message to the RNC, with the cell update cause of changeofURA, and the RNC should send the RRC_URA_UPDATE_CONFIRM message to
the UE.
Do not send any data from the UE for five minutes, to trigger periodic URA update. The UE should send the RRC_URA_UPDATE message to the RNC, with the cell update cause
of URA reselection, and the RNC should send the RRC_URA_UPDATE_CONFIRM message to the UE.
4.3.4 Deactivation
This feature does not need to be deactivated.
4.4.1 Requirements
Dependencies on Hardware
This feature does not have any special requirements for hardware.
Dependencies on Other Features
This feature does not depend on other features.
License
This feature is not under license control.
Others
The neighbouring RNC should support this feature.
4.4.2 Activation
1. Configure the Iur interface. For details, see the BSC6900 UMTS Initial Configuration Guide or BSC6910 UMTS Initial Configuration Guide.
2. Run the RNC MML command ADD UCELLURA (CME single configuration: UMTS Cell Configuration Express > Cell Basic Information > Cell URA; CME batch
modification center: not supported) to configure CELL1 and CELL2 to make them belong to different URAs.
NOTE:
Cell1 belongs to RNC_1, Cell2 belongs to RNC_2.
3. On the RNC1 side, run the RNC MML command SET UCORRMALGOSWITCH (CME single configuration: UMTS Radio Global Configuration Express >
Connection_Oriented RRM Switch Configuration > Connection Oriented Algorithm Switches; CME batch modification center: Modifying RNC Parameters in Batches) to
turn on the RNC-oriented PS BE service state transition switch.
4. Optional: Run the RNC MML command SET UCORRMALGOSWITCH (CME single configuration: UMTS Radio Global Configuration Express > Connection_Oriented
RRM Switch Configuration > Connection Oriented Algorithm Switches; CME batch modification center: Modifying RNC Parameters in Batches). In this step, select the
DRA_F2U_SWITCH check box under the parameter Dynamic Resource Allocation Switch to enable state transition from CELL_FACH to URA_PCH directly.
5. Run the RNC MML command SET UUESTATETRANSTIMER (CME single configuration: UMTS Radio Global Configuration Express > UE State Transition Parameter
Configuration > RNC StateTrans Timer Parameters; CME batch modification center: Modifying RNC Parameters in Batches) to set the Cell Reselection Timer, BE
DCH to FACH Transition Timer, and BE FACH or E_FACH to PCH Transition Timer parameters to 60s, 10s, and 10s respectively.
6. Run the RNC MML command SET UUESTATETRANS (CME single configuration: UMTS Radio Global Configuration Express > UE State Transition Parameter
Configuration > UE State Translating Parameters; CME batch modification center: Modifying RNC Parameters in Batches) to set the parameter Cell Reselection
Counter Threshold to 1.
7. Run the RNC MML command SET UPSINACTTIMER (CME single configuration: UMTS Radio Global Configuration Express > PS Permanent Online Detection Timer
Configuration > PS User Inactive Detecting Timer; CME batch modification center: Modifying RNC Parameters in Batches) to set inactivity detection timers for PS
services.
8. Configure intra-frequency neighboring cells. For details, see the BSC6900 UMTS Initial Configuration Guide or BSC6910 UMTS Initial Configuration Guide.
9. Run the RNC MML command MOD UNRNC (CME single configuration: IUR Configuration Express > Neighbouring RNC > Neighboring RNC; CME batch modification
center: not supported) to enable the setup of command channels on the Iur interface.
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 11/31
2/6/2018 URA-Cell Update Feature Parameter Description
CELL2. Make UE1 perform another cell reselection after the Cell Reselection Timer[s] expires. Search for the last RRC_CELL_UPDATE_CONFIRM
message in trace data. The value of the rrc-stateindicator IE should be URA_PCH.
If the switch is on: Do not send any data from the UE for another while. Then, the network side should perform UE transition to URA_PCH state through the
RRC_RB_RECFG message, and the value of the rrc-stateindicator IE should be URA_PCH.
8. Keep the UE in URA_PCH state. Perform another cell reselection between CELL1 and CELL2 so as to trigger URA update. The UE should send the
RRC_URA_UPDATE message to the RNC, with the cell update cause of CHANGE OF URA, and the RNC should send the RRC_URA_UPDATE_CONFIRM message
to the UE.
4.4.4 Deactivation
This feature does not need to be deactivated.
5 Parameters
Table 5-1 Parameter description
PROCESSSWITCH4 BSC6900 SET WRFD- Inter Frequency Hard Meaning:1) AMR_HHO_FAIL_ROLLBACK_SWITCH (Hard Handover Failure Rollback Switc
URRCTRLSWITCH 020302 Handover Based on Speech Services) When this switch is turned on, the RNC supports rollback caused by failed
WRFD- Coverage CS AMR speech services. It is recommended that the timer T312 be set to 1 second (SET
010510 3.4/6.8/13.6/27.2Kbps UCONNMODETIMER: T312=1;) before turning on this switch. If the timer T312 is not set to 1
WRFD- RRC Connection and noise will occur on some UEs. When this switch is turned off, the RNC does not support rollb
020304 Radio Access Bearer failed hard handovers of CS AMR speech services, leading to call drops. 2)
Establishment and RRC_CONN_SETUP_OPT_SWITCH (RRC CONNECTION SETUP Message Optimization S
WRFD-
Release optimization of the RRC CONNECTION SETUP message takes effect. When this switch is tu
01060902
Inter Frequency Hard optimization of the RRC CONNECTION SETUP message takes effect. If the IE RLC info und
WRFD- in the RRC CONNECTION SETUP message contains the same information as that under SR
02040002 Handover Based on
DL QoS replaces the IE RLC info under SRB3 or SRB4 with the IE same as RB:0x2(2) to shorten the
WRFD- message. When this switch is turned off, the RNC does not replace the IE RLC info under SR
020303 Combination of One
RRC CONNECTION SETUP message. 3) PS_F2D_OVERLAP_CELLUPT_SWITCH (Switch
CS Service and One
WRFD- PS Service Setup F2D and Cell Update Procedures) During the PS service setup, the RNC u
PS Service
020305 CELL_FACH-to-CELL_DCH (F2D for short) procedure when it receives a Cell Update messa
Inter System Direct value "cell reselection" during the F2D procedure. When this switch is turned on, the RNC tem
WRFD-
Retry send the RANAP_RAB_ASSIGNMENT_RESP message to the CN after the F2D procedure i
020306
Inter-RAT Handover until the Cell Update message is processed and the PS service is set up successfully. When
WRFD-
Based on Coverage off, the RNC directly responds to the CN with a RANAP_RAB_ASSIGNMENT_RESP messag
010101
Inter-RAT Handover value "IU_UNSPEC_FAIL" after the F2D procedure is undone, indicating that the PS service
WRFD- TCP_ACK_ACCELERATOR_SWITCH (Switch for Throughput Increase in the Case of Simul
Based on Service
140205 downlink Transmissions) This switch is turned on to increase the total throughput in the uplin
Inter-RAT Handover
Based on Load when uplink and downlink HSPA data is transmitted simultaneously. In other scenarios, you a
off the switch. When this switch is turned on, the function of increasing the total throughput in
3GPP R9
simultaneous uplink and downlink transmissions takes effect. When this switch is turned off, t
Specifications
increasing the total throughput in the case of simultaneous uplink and downlink transmissions
Voice Service effect. 5) PHY_RECFG_REEST_SWITCH (Switch for RL Reestablishments During the Phys
Experience Reconfiguration) When this switch is turned on, a UE sends the RNC a Cell Update message
Improvement for value "Radio Link Failure" and the RNC reestablishes the radio link for the UE under the follo
Weak Reception Ues The UE has not responded to the Physical Channel Reconfiguration message. The RNC dete
downlink transmission on SRB2 or the NodeB reports that all radio links of the UE are out of
When this switch is turned off, the RNC does not reestablish the radio link for the UE under th
conditions. 6) IUR_RL_REEST_SWITCH (Iur RL Reestablishment Switch) When this switch
RNC deletes the existing Iur radio links for the UE during the RNC performing radio link reest
this switch is turned off, the RNC does not delete the existing Iur radio links during the RNC p
reestablishment. 7) RB_SETUP_RL_REEST_SWITCH (Switch for RL Reestablishment or Ce
RB Setup) When this switch is turned on and the RNC is waiting for a UE's response during a
setup CELL_DCH-to-CELL_DCH (D2D) procedure: The RNC reestablishes a radio link (RL)
RNC detects a signaling radio bearer (SRB) reset at layer 2 (L2) or all uplink RLs for the UE
synchronization upon expiration of the RL Restore timer. For the RL reestablishment triggere
detected by RNC, the switch CELLUPT_RLFAILURE_SRBREESTAB_SWITCH under "PROC
the "SET URRCTRLSWITCH" command should be turned on. The RNC performs a cell upda
receives a CELL UPDATE message with the cause value of RL FAILURE, RLC UNRECOVE
REENTERED SERVICE AREA. When this switch is turned off and the RNC is waiting for a U
during an RB setup D2D procedure, the RNC does not perform an RL reestablishment or cel
trigger conditions are met. 8) RRC_CELLFACH_TRB_RESET_TO_F2D_SWITCH (The CEL
CELL_DCH state (F2D) transition switch by TRB reset) When the RNC receives a TRB reset
in the CELL_FACH state, the RNC cannot respond to the UE with a confirm message if the F
The RRC_CELLFACH_TRB_RESET_TO_F2D_SWITCH parameter specifies whether a UE
transition if the number of TRB reset requests from the UE to the RNC reaches a specified th
switch is turned on, the UE moves from the CELL_FACH state to the CELL_DCH state. If the
the UE does not move from the CELL_FACH state to the CELL_DCH state. This function hel
number of call drops caused by the RNC not responding to the TRB reset requests during FA
SEND_MSG_NULL_SWITCH (MM NULL Message Switch) Whether the RNC sends an MM
the CS CN. If the switch RNC_CS_QUERY_UE_IMEI_SWITCH under PROCESSSWITCH2
URRCTRLSWITCH command is turned on, testing the interworking between the RNC and th
the CN needs to verify the serial number of direct transfer messages, turn on this switch. The
the CS CN sends an IDENTITY REQUEST message to a UE to obtain its IMEI. Upon receivi
RESPONSE message from the UE: The RNC sends an MM NULL message to the CS CN if
on. The RNC does not send an MM NULL message to the CS CN if this switch is turned off.
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 12/31
2/6/2018 URA-Cell Update Feature Parameter Description
ProcessSwitch4 BSC6910 SET WRFD- Inter Frequency Hard Meaning:1) AMR_HHO_FAIL_ROLLBACK_SWITCH (Hard Handover Failure Rollback Switc
URRCTRLSWITCH 020302 Handover Based on Speech Services) When this switch is turned on, the RNC supports rollback caused by failed
WRFD- Coverage CS AMR speech services. It is recommended that the timer T312 be set to 1 second (SET
010510 3.4/6.8/13.6/27.2Kbps UCONNMODETIMER: T312=1;) before turning on this switch. If the timer T312 is not set to 1
WRFD- RRC Connection and noise will occur on some UEs. When this switch is turned off, the RNC does not support rollb
020304 Radio Access Bearer failed hard handovers of CS AMR speech services, leading to call drops. 2)
Establishment and RRC_CONN_SETUP_OPT_SWITCH (RRC CONNECTION SETUP Message Optimization S
WRFD-
Release optimization of the RRC CONNECTION SETUP message takes effect. When this switch is tu
01060902
Inter Frequency Hard optimization of the RRC CONNECTION SETUP message takes effect. If the IE RLC info und
WRFD- in the RRC CONNECTION SETUP message contains the same information as that under SR
02040002 Handover Based on
DL QoS replaces the IE RLC info under SRB3 or SRB4 with the IE same as RB:0x2(2) to shorten the
WRFD- message. When this switch is turned off, the RNC does not replace the IE RLC info under SR
020303 Combination of One
RRC CONNECTION SETUP message. 3) PS_F2D_OVERLAP_CELLUPT_SWITCH (Switch
CS Service and One
PS Service Setup F2D and Cell Update Procedures) During the PS service setup, the RNC u
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 14/31
2/6/2018 URA-Cell Update Feature Parameter Description
WRFD-
Parameter ID NE MML Command Feature Feature Name Description
020305
ID
WRFD-
020306 PS Service CELL_FACH-to-CELL_DCH (F2D for short) procedure when it receives a Cell Update messa
WRFD- Inter System Direct value "cell reselection" during the F2D procedure. When this switch is turned on, the RNC tem
010101 Retry send the RANAP_RAB_ASSIGNMENT_RESP message to the CN after the F2D procedure i
Inter-RAT Handover until the Cell Update message is processed and the PS service is set up successfully. When
WRFD- off, the RNC directly responds to the CN with a RANAP_RAB_ASSIGNMENT_RESP messag
140205 Based on Coverage
value "IU_UNSPEC_FAIL" after the F2D procedure is undone, indicating that the PS service
Inter-RAT Handover
TCP_ACK_ACCELERATOR_SWITCH (Switch for Throughput Increase in the Case of Simul
Based on Service
downlink Transmissions) This switch is turned on to increase the total throughput in the uplin
Inter-RAT Handover when uplink and downlink HSPA data is transmitted simultaneously. In other scenarios, you a
Based on Load off the switch. When this switch is turned on, the function of increasing the total throughput in
3GPP R9 simultaneous uplink and downlink transmissions takes effect. When this switch is turned off, t
Specifications increasing the total throughput in the case of simultaneous uplink and downlink transmissions
Voice Service effect. 5) PHY_RECFG_REEST_SWITCH (Switch for RL Reestablishments During the Phys
Experience Reconfiguration) When this switch is turned on, a UE sends the RNC a Cell Update message
Improvement for value "Radio Link Failure" and the RNC reestablishes the radio link for the UE under the follo
Weak Reception Ues The UE has not responded to the Physical Channel Reconfiguration message. The RNC dete
downlink transmission on SRB2 or the NodeB reports that all radio links of the UE are out of
When this switch is turned off, the RNC does not reestablish the radio link for the UE under th
conditions. 6) IUR_RL_REEST_SWITCH (Iur RL Reestablishment Switch) When this switch
RNC deletes the existing Iur radio links for the UE during the RNC performing radio link reest
this switch is turned off, the RNC does not delete the existing Iur radio links during the RNC p
reestablishment. 7) RB_SETUP_RL_REEST_SWITCH (Switch for RL Reestablishment or Ce
RB Setup) When this switch is turned on and the RNC is waiting for a UE's response during a
setup CELL_DCH-to-CELL_DCH (D2D) procedure: The RNC reestablishes a radio link (RL)
RNC detects a signaling radio bearer (SRB) reset at layer 2 (L2) or all uplink RLs for the UE
synchronization upon expiration of the RL Restore timer. For the RL reestablishment triggere
detected by RNC, the switch CELLUPT_RLFAILURE_SRBREESTAB_SWITCH under "PROC
the "SET URRCTRLSWITCH" command should be turned on. The RNC performs a cell upda
receives a CELL UPDATE message with the cause value of RL FAILURE, RLC UNRECOVE
REENTERED SERVICE AREA. When this switch is turned off and the RNC is waiting for a U
during an RB setup D2D procedure, the RNC does not perform an RL reestablishment or cel
trigger conditions are met. 8) RRC_CELLFACH_TRB_RESET_TO_F2D_SWITCH (The CEL
CELL_DCH state (F2D) transition switch by TRB reset) When the RNC receives a TRB reset
in the CELL_FACH state, the RNC cannot respond to the UE with a confirm message if the F
The RRC_CELLFACH_TRB_RESET_TO_F2D_SWITCH parameter specifies whether a UE
transition if the number of TRB reset requests from the UE to the RNC reaches a specified th
switch is turned on, the UE moves from the CELL_FACH state to the CELL_DCH state. If the
the UE does not move from the CELL_FACH state to the CELL_DCH state. This function hel
number of call drops caused by the RNC not responding to the TRB reset requests during FA
SEND_MSG_NULL_SWITCH (MM NULL Message Switch) Whether the RNC sends an MM
the CS CN. If the switch RNC_CS_QUERY_UE_IMEI_SWITCH under PROCESSSWITCH2
URRCTRLSWITCH command is turned on, testing the interworking between the RNC and th
the CN needs to verify the serial number of direct transfer messages, turn on this switch. The
the CS CN sends an IDENTITY REQUEST message to a UE to obtain its IMEI. Upon receivi
RESPONSE message from the UE: The RNC sends an MM NULL message to the CS CN if
on. The RNC does not send an MM NULL message to the CS CN if this switch is turned off.
10)FD_PCH_IUR_CS_OPT_SWITCH CS paging message processing switch for UEs in the
URA_PCH state that support fast dormancy on the drift radio network controller (DRNC) side
is turned on,the SRNC instructs these UEs to transition to the CELL_DCH state and to estab
when these UEs receive a CS paging message. When this switch is turned off,the SRNC rele
connection of these UEs when these UEs receive a CS paging message.
11)CELLUPT_T314_T315_TIMEOUT_OPT_SWITCH Whether the RNC releases the connec
state other than CELL_DCH when the T314/T315 timer in the cell update message received
When this switch is turned on,the RNC continues with the cell update processing when the T
the cell update message expires. When this switch is turned off,the RNC abnormally releases
the UE when the T314/T315 timer in the cell update message expires. 12)
CS_HHO_ASYNC_CTRL_SWITCH(Asynchronous Reconfigure Switch for CS HHO) When t
on, the RNC does not put the activation time information element (IE) in the hard handover c
message for CS services. After receiving the message, the UE immediately activates the con
this switch is turned off, the RNC puts the activation time IE in the hard handover configuratio
services. After receiving the message, the UE activates the configuration at the specified acti
PS_HHO_ASYNC_CTRL_SWITCH(Asynchronous Reconfigure Switch for PS HHO) When th
on, the RNC does not put the activation time information element (IE) in the hard handover c
message for PS services. After receiving the message, the UE immediately activates the con
this switch is turned off, the RNC puts the activation time IE in the hard handover configuratio
services. After receiving the message, the UE activates the configuration at the specified acti
IUR_HHO_ASYNC_CTRL_SWITCH(Asynchronous Reconfigure Switch for Iur HHO) When t
on, the RNC does not put the activation time information element (IE) in the hard handover c
message across the Iur interface. After receiving the message, the UE immediately activates
When this switch is turned off, the RNC puts the activation time IE in the hard handover confi
across the Iur interface. After receiving the message, the UE activates the configuration at th
activation time. 15) F2P_DATATRANS_OPTIMIZE_SWITCH(Switch for Optimized Data Tran
State Transition from CELL_FACH to CELL_PCH or URA_PCH) Whether the RNC queries th
and after a UE moves from the CELL_FACH state to the CELL_PCH or URA_PCH state due
in the CELL_FACH state can move to the CELL_PCH or URA_PCH state even when there is
transmission for the UE. When this occurs, data packets are suspended on the RNC side. Th
introduced to solve this problem. When this switch is turned on, the RNC queries the RLC sta
moves from the CELL_FACH state to the CELL_PCH or URA_PCH state due to event 4B. If
the UE does not perform the state transition. If the state query succeeds, the UE continues w
transition. The RNC queries the RLC state again after the state transition is complete and be
deactivated. If there is SRB3, SRB4, or TRB data to be transmitted to the UE on the RLC, the
is triggered. When this switch is turned off, the original state transition from CELL_FACH to C
URA_PCH is used. This parameter is an advanced parameter. To modify this parameter, con
Customer Service Center for technical support. 16)IRATHO_HOCANCEL_RL_REEST_SWIT
Reestablishments During the inter-RAT Handover) When this switch is turned on, the RNC re
link (RL) for the UE during a inter-RAT Handover procedure if the RNC detects a signaling ra
reset at layer 2 (L2) or all uplink RLs for the UE are out of synchronization upon expiration of
timer after the RNC sends UE a HANDOVER FROM UTRAN COMMAND message or a CEL
ORDER FROM UTRAN message and UE fails to receive these two messages. When this sw
the RNC does not reestablish the radio link for the UE under the preceding conditions.
17)TRB_RESET_RL_REEST_SWITCH(Switch for RL Reestablishments Triggered by TRB R
switch is turned on, the RNC reestablishes a radio link (RL) for the UE if the RNC detects a tr
(TRB) reset at layer 2 (L2) under the following conditions: UE is in CELL_DCH state and UE
signaling procedure. UE has only one PS RAB. When this switch is turned off, the RNC does
radio link for the UE under the preceding conditions. 18)RB_REL_RL_REEST_SWITCH(Swi
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 15/31
2/6/2018 URA-Cell Update Feature Parameter Description
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 16/31
2/6/2018 URA-Cell Update Feature Parameter Description
T305 BSC6900 SET WRFD- 3GPP R9 Meaning:Timer 305. T305 starts when a UE enters the CELL_FACH, URA_PCH, or CELL_P
UCONNMODETIMER 010101 Specifications receives a CELL UPDATE CONFIRM/URA UPDATE CONFIRM message and the UE enters
WRFD- Intra RNC Cell URA_PCH, or CELL_PCH state after state transition, T305 also starts. T305 stops when the
010801 Update state. When T305 expires, the UE sends a CELL UPDATE message if the UE detects "in ser
does not start. If the UE detects "out of service area" when T305 expires, T307 starts. The pr
default value is 30. When this parameter is set to INFINITY, the value will not be updated. Th
parameter is contained in SIB1 messages.
GUI Value Range:INFINITY, D5, D10, D30, D60, D120, D360, D720
Unit:min
Actual Value Range:INFINITY, 5, 10, 30, 60, 120, 360, 720
Default Value:D30
T305 BSC6910 SET WRFD- 3GPP R9 Meaning:Timer 305. T305 starts when a UE enters the CELL_FACH, URA_PCH, or CELL_P
UCONNMODETIMER 010101 Specifications receives a CELL UPDATE CONFIRM/URA UPDATE CONFIRM message and the UE enters
WRFD- Intra RNC Cell URA_PCH, or CELL_PCH state after state transition, T305 also starts. T305 stops when the
010801 Update state. When T305 expires, the UE sends a CELL UPDATE message if the UE detects "in ser
does not start. If the UE detects "out of service area" when T305 expires, T307 starts. The pr
default value is 30. When this parameter is set to INFINITY, the value will not be updated. Th
parameter is contained in SIB1 messages.
GUI Value Range:INFINITY, D5, D10, D30, D60, D120, D360, D720
Unit:min
Actual Value Range:INFINITY, 5, 10, 30, 60, 120, 360, 720
Default Value:D30
T302 BSC6900 SET WRFD- 3GPP R9 Meaning:Timer 302. T302 starts when a UE sends a CELL UPDATE/URA UPDATE message
UCONNMODETIMER 010101 Specifications the UE receives a CELL UPDATE CONFIRM/URA UPDATE CONFIRM message. When T30
resends a CELL UPDATE/URA UPDATE message if the value of the counter V302 is smaller
that of the parameter N302. If the value of V302 is larger than that of N302 when T302 expire
the idle mode. The protocol-defined default value is 4000. The value of this parameter is con
messages.
GUI Value Range:D100, D200, D400, D600, D800, D1000, D1200, D1400, D1600, D1800, D
D4000, D6000, D8000
Unit:ms
Actual Value Range:100, 200, 400, 600, 800, 1000, 1200, 1400, 1600, 1800, 2000, 3000, 400
Default Value:D2000
T302 BSC6910 SET WRFD- 3GPP R9 Meaning:Timer 302. T302 starts when a UE sends a CELL UPDATE/URA UPDATE message
UCONNMODETIMER 010101 Specifications the UE receives a CELL UPDATE CONFIRM/URA UPDATE CONFIRM message. When T30
resends a CELL UPDATE/URA UPDATE message if the value of the counter V302 is smaller
that of the parameter N302. If the value of V302 is larger than that of N302 when T302 expire
the idle mode. The protocol-defined default value is 4000. The value of this parameter is con
messages.
GUI Value Range:D100, D200, D400, D600, D800, D1000, D1200, D1400, D1600, D1800, D
D4000, D6000, D8000
Unit:ms
Actual Value Range:100, 200, 400, 600, 800, 1000, 1200, 1400, 1600, 1800, 2000, 3000, 400
Default Value:D2000
T307 BSC6900 SET WRFD- 3GPP R9 Meaning:Timer 307. T307 starts when T305 expires and the UE detects "out of service area.
UCONNMODETIMER 010101 Specifications the UE detects "in service area." When T307 expires, the UE enters the idle mode. The proto
value is 30. The value of this parameter is contained in SIB1 messages.
GUI Value Range:D5, D10, D15, D20, D30, D40, D50
Unit:s
Actual Value Range:5, 10, 15, 20, 30, 40, 50
Default Value:D30
T307 BSC6910 SET WRFD- 3GPP R9 Meaning:Timer 307. T307 starts when T305 expires and the UE detects "out of service area.
UCONNMODETIMER 010101 Specifications the UE detects "in service area." When T307 expires, the UE enters the idle mode. The proto
value is 30. The value of this parameter is contained in SIB1 messages.
GUI Value Range:D5, D10, D15, D20, D30, D40, D50
Unit:s
Actual Value Range:5, 10, 15, 20, 30, 40, 50
Default Value:D30
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 17/31
2/6/2018 URA-Cell Update Feature Parameter Description
N302 BSC6900 SET WRFD- 3GPP R9 Meaning:Maximum number of retransmissions of the CELL UPDATE/URA UPDATE message
UCONNMODETIMER 010101 Specifications defined default value is 3. The value of this parameter is contained in SIB1 messages.
GUI Value Range:0~7
Unit:None
Actual Value Range:0~7
Default Value:3
N302 BSC6910 SET WRFD- 3GPP R9 Meaning:Maximum number of retransmissions of the CELL UPDATE/URA UPDATE message
UCONNMODETIMER 010101 Specifications defined default value is 3. The value of this parameter is contained in SIB1 messages.
GUI Value Range:0~7
Unit:None
Actual Value Range:0~7
Default Value:3
URAId BSC6900 ADD UCELLURA WRFD- 3GPP R9 Meaning:Identity of the UTRAN registration area. The URA is only used by the UTRAN and t
RMV UCELLURA 010101 Specifications know the URA. The URA consists of multiple cells. When the UE enters the URA-PCH state,
UE is identified with the URA ID.The URA is an area covered by cells. In this area, a UE in th
does not need to frequently perform cell update. One cell can belong to multiple URAs. The R
URA by using the URA ID. Each URA ID is uniquely numbered within a RNC. The URA IDs r
65535. For details about this parameter, see 3GPP TS 25.331 protocol.
GUI Value Range:0~65535
Unit:None
Actual Value Range:0~65535
Default Value:None
URAId BSC6910 ADD UCELLURA WRFD- 3GPP R9 Meaning:Identity of the UTRAN registration area. The URA is only used by the UTRAN and t
RMV UCELLURA 010101 Specifications know the URA. The URA consists of multiple cells. When the UE enters the URA-PCH state,
UE is identified with the URA ID.The URA is an area covered by cells. In this area, a UE in th
does not need to frequently perform cell update. One cell can belong to multiple URAs. The R
URA by using the URA ID. Each URA ID is uniquely numbered within a RNC. The URA IDs r
65535. For details about this parameter, see 3GPP TS 25.331 protocol.
GUI Value Range:0~65535
Unit:None
Actual Value Range:0~65535
Default Value:None
ConnQhyst1s BSC6900 ADD WRFD- Intra RNC Cell Meaning:Hysteresis value of the serving cell in connected mode when "QualMeas" is set to
UCELLSELRESEL 010801 Update CPICH_RSCP(CPICH RSCP).The sum of the measurement value of the serving cell and the
MOD WRFD- Inter RNC Cell used in the R criteria for cell reselection. For details about this parameter, see 3GPP TS 25.3
UCELLSELRESEL 010802 Update GUI Value Range:0~20
WRFD- Intra RNC URA Unit:2dB
010901 Update Actual Value Range:0~40
WRFD- Inter RNC URA Default Value:2
010902 Update
ConnQhyst1s BSC6910 ADD WRFD- Intra RNC Cell Meaning:Hysteresis value of the serving cell in connected mode when "QualMeas" is set to
UCELLSELRESEL 010801 Update CPICH_RSCP(CPICH RSCP).The sum of the measurement value of the serving cell and the
MOD WRFD- Inter RNC Cell used in the R criteria for cell reselection. For details about this parameter, see 3GPP TS 25.3
UCELLSELRESEL 010802 Update GUI Value Range:0~20
WRFD- Intra RNC URA Unit:2dB
010901 Update Actual Value Range:0~40
WRFD- Inter RNC URA Default Value:2
010902 Update
ConnQhyst2s BSC6900 ADD WRFD- Intra RNC Cell Meaning:Hysteresis value of the serving cell in connected mode when "QualMeas" is set to
UCELLSELRESEL 010801 Update CPICH_ECNO(CPICH Ec/N0). The sum of the measurement value of the serving cell and the
MOD WRFD- Inter RNC Cell used in the R criteria for cell reselection. For details about this parameter, see 3GPP TS 25.3
UCELLSELRESEL 010802 Update GUI Value Range:0~20;255
WRFD- Intra RNC URA Unit:2dB
010901 Update Actual Value Range:0~40, 255
WRFD- Inter RNC URA Default Value:1
010902 Update
ConnQhyst2s BSC6910 ADD WRFD- Intra RNC Cell Meaning:Hysteresis value of the serving cell in connected mode when "QualMeas" is set to
UCELLSELRESEL 010801 Update CPICH_ECNO(CPICH Ec/N0). The sum of the measurement value of the serving cell and the
MOD WRFD- Inter RNC Cell used in the R criteria for cell reselection. For details about this parameter, see 3GPP TS 25.3
UCELLSELRESEL 010802 Update GUI Value Range:0~20;255
WRFD- Intra RNC URA Unit:2dB
010901 Update Actual Value Range:0~40, 255
WRFD- Inter RNC URA Default Value:1
010902 Update
QualMeas BSC6900 ADD WRFD- Intra RNC Cell Meaning:Measurement quantity of cell selection and reselection. For details about this param
UCELLSELRESEL 010801 Update 25.304.
MOD WRFD- Inter RNC Cell GUI Value Range:CPICH_ECNO(CPICH Ec/N0), CPICH_RSCP(CPICH RSCP)
UCELLSELRESEL 010802 Update Unit:None
Actual Value Range:CPICH_ECNO, CPICH_RSCP
Default Value:CPICH_ECNO(CPICH Ec/N0)
QualMeas BSC6910 ADD WRFD- Intra RNC Cell Meaning:Measurement quantity of cell selection and reselection. For details about this param
UCELLSELRESEL 010801 Update 25.304.
MOD WRFD- Inter RNC Cell GUI Value Range:CPICH_ECNO(CPICH Ec/N0), CPICH_RSCP(CPICH RSCP)
UCELLSELRESEL 010802 Update Unit:None
Actual Value Range:CPICH_ECNO, CPICH_RSCP
Default Value:CPICH_ECNO(CPICH Ec/N0)
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 18/31
2/6/2018 URA-Cell Update Feature Parameter Description
Qqualmin BSC6900 ADD WRFD- Intra RNC Cell Meaning:The minimum required quality threshold corresponding to CPICH Ec/No. When the
UCELLSELRESEL 010801 Update Ec/No is larger than the value of this parameter, the cell meets the S criteria of quality level fo
MOD WRFD- Inter RNC Cell selection/reselection. The RNC decides whether the UE can camp on the cell according to th
UCELLSELRESEL 010802 Update selection/reselection criteria. For details about this parameter, see 3GPP TS 25.304.
GUI Value Range:-24~0
Unit:dB
Actual Value Range:-24~0
Default Value:-18
Qqualmin BSC6910 ADD WRFD- Intra RNC Cell Meaning:The minimum required quality threshold corresponding to CPICH Ec/No. When the
UCELLSELRESEL 010801 Update Ec/No is larger than the value of this parameter, the cell meets the S criteria of quality level fo
MOD WRFD- Inter RNC Cell selection/reselection. The RNC decides whether the UE can camp on the cell according to th
UCELLSELRESEL 010802 Update selection/reselection criteria. For details about this parameter, see 3GPP TS 25.304.
GUI Value Range:-24~0
Unit:dB
Actual Value Range:-24~0
Default Value:-18
Qhyst1spch BSC6900 ADD WRFD- Intra RNC Cell Meaning:Measurement hysteresis 1 of a UE in the CELL_PCH or URA_PCH state. This para
UCELLSELRESEL 010801 Update when its value is 255. For details about this parameter, see 3GPP TS 25.304.
MOD WRFD- Inter RNC Cell GUI Value Range:0~40;255
UCELLSELRESEL 010802 Update Unit:dB
WRFD- Intra RNC URA Actual Value Range:0~40, 255
010901 Update Default Value:255
WRFD- Inter RNC URA
010902 Update
Qhyst1spch BSC6910 ADD WRFD- Intra RNC Cell Meaning:Measurement hysteresis 1 of a UE in the CELL_PCH or URA_PCH state. This para
UCELLSELRESEL 010801 Update when its value is 255. For details about this parameter, see 3GPP TS 25.304.
MOD WRFD- Inter RNC Cell GUI Value Range:0~40;255
UCELLSELRESEL 010802 Update Unit:dB
WRFD- Intra RNC URA Actual Value Range:0~40, 255
010901 Update Default Value:255
WRFD- Inter RNC URA
010902 Update
Qhyst1sfach BSC6900 ADD WRFD- Intra RNC Cell Meaning:Measurement hysteresis 1 of a UE in the CELL_FACH state. This parameter is not
UCELLSELRESEL 010801 Update is 255. For details about this parameter, see 3GPP TS 25.304.
MOD WRFD- Inter RNC Cell GUI Value Range:0~40;255
UCELLSELRESEL 010802 Update Unit:dB
Actual Value Range:0~40, 255
Default Value:255
Qhyst1sfach BSC6910 ADD WRFD- Intra RNC Cell Meaning:Measurement hysteresis 1 of a UE in the CELL_FACH state. This parameter is not
UCELLSELRESEL 010801 Update is 255. For details about this parameter, see 3GPP TS 25.304.
MOD WRFD- Inter RNC Cell GUI Value Range:0~40;255
UCELLSELRESEL 010802 Update Unit:dB
Actual Value Range:0~40, 255
Default Value:255
Qhyst2spch BSC6900 ADD WRFD- Intra RNC Cell Meaning:Measurement hysteresis 2 of a UE in the CELL_PCH or URA_PCH state. When thi
UCELLSELRESEL 010801 Update 255, the value of "Qhyst1spch" is used. For details about this parameter, see 3GPP TS 25.30
MOD WRFD- Inter RNC Cell GUI Value Range:0~40;255
UCELLSELRESEL 010802 Update Unit:dB
WRFD- Intra RNC URA Actual Value Range:0~40, 255
010901 Update Default Value:255
WRFD- Inter RNC URA
010902 Update
Qhyst2spch BSC6910 ADD WRFD- Intra RNC Cell Meaning:Measurement hysteresis 2 of a UE in the CELL_PCH or URA_PCH state. When thi
UCELLSELRESEL 010801 Update 255, the value of "Qhyst1spch" is used. For details about this parameter, see 3GPP TS 25.30
MOD WRFD- Inter RNC Cell GUI Value Range:0~40;255
UCELLSELRESEL 010802 Update Unit:dB
WRFD- Intra RNC URA Actual Value Range:0~40, 255
010901 Update Default Value:255
WRFD- Inter RNC URA
010902 Update
Qhyst2sfach BSC6900 ADD WRFD- Intra RNC Cell Meaning:Measurement hysteresis 2 of a UE in the CELL_FACH state. When this parameter i
UCELLSELRESEL 010801 Update value of "Qhyst1spch" is used. For details about this parameter, see 3GPP TS 25.304.
MOD WRFD- Inter RNC Cell GUI Value Range:0~40;255
UCELLSELRESEL 010802 Update Unit:dB
Actual Value Range:0~40, 255
Default Value:255
Qhyst2sfach BSC6910 ADD WRFD- Intra RNC Cell Meaning:Measurement hysteresis 2 of a UE in the CELL_FACH state. When this parameter i
UCELLSELRESEL 010801 Update value of "Qhyst1spch" is used. For details about this parameter, see 3GPP TS 25.304.
MOD WRFD- Inter RNC Cell GUI Value Range:0~40;255
UCELLSELRESEL 010802 Update Unit:dB
Actual Value Range:0~40, 255
Default Value:255
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 19/31
2/6/2018 URA-Cell Update Feature Parameter Description
Treselectionspch BSC6900 ADD WRFD- Intra RNC Cell Meaning:Reselection delay of a UE in the CELL_PCH or URA_PCH state. This parameter is
UCELLSELRESEL 010801 Update value is 255. For details about this parameter, see 3GPP TS 25.304.
MOD WRFD- Inter RNC Cell GUI Value Range:0~31;255
UCELLSELRESEL 010802 Update Unit:s
Actual Value Range:0~31, 255
Default Value:255
Treselectionspch BSC6910 ADD WRFD- Intra RNC Cell Meaning:Reselection delay of a UE in the CELL_PCH or URA_PCH state. This parameter is
UCELLSELRESEL 010801 Update value is 255. For details about this parameter, see 3GPP TS 25.304.
MOD WRFD- Inter RNC Cell GUI Value Range:0~31;255
UCELLSELRESEL 010802 Update Unit:s
Actual Value Range:0~31, 255
Default Value:255
Treselectionsfach BSC6900 ADD WRFD- Intra RNC Cell Meaning:Reselection delay of a UE in the CELL_FACH state. This parameter is not used whe
UCELLSELRESEL 010801 Update For details about this parameter, see 3GPP TS 25.304.
MOD WRFD- Inter RNC Cell GUI Value Range:0~31;255
UCELLSELRESEL 010802 Update Unit:0.2s
Actual Value Range:0~6.2, 255
Default Value:255
Treselectionsfach BSC6910 ADD WRFD- Intra RNC Cell Meaning:Reselection delay of a UE in the CELL_FACH state. This parameter is not used whe
UCELLSELRESEL 010801 Update For details about this parameter, see 3GPP TS 25.304.
MOD WRFD- Inter RNC Cell GUI Value Range:0~31;255
UCELLSELRESEL 010802 Update Unit:0.2s
Actual Value Range:0~6.2, 255
Default Value:255
T313 BSC6900 SET WRFD- 3GPP R9 Meaning:Timer 313. T313 stars when a UE detects N313 successive "out of sync" indications
UCONNMODETIMER 010101 Specifications stops when the UE detects N315 successive "in sync" indications form Layer 1. When T313 e
link setup fails. The protocol-defined default value is 3. The value of this parameter is contain
messages.
GUI Value Range:0~15
Unit:s
Actual Value Range:0~15
Default Value:3
T313 BSC6910 SET WRFD- 3GPP R9 Meaning:Timer 313. T313 stars when a UE detects N313 successive "out of sync" indications
UCONNMODETIMER 010101 Specifications stops when the UE detects N315 successive "in sync" indications form Layer 1. When T313 e
link setup fails. The protocol-defined default value is 3. The value of this parameter is contain
messages.
GUI Value Range:0~15
Unit:s
Actual Value Range:0~15
Default Value:3
N313 BSC6900 SET WRFD- 3GPP R9 Meaning:Maximum number of successive "out of sync" indications received from Layer 1. Th
UCONNMODETIMER 010101 Specifications default value is 20. The value of this parameter is contained in SIB1 messages.
GUI Value Range:D1, D2, D4, D10, D20, D50, D100, D200
Unit:None
Actual Value Range:1, 2, 4, 10, 20, 50, 100, 200
Default Value:D50
N313 BSC6910 SET WRFD- 3GPP R9 Meaning:Maximum number of successive "out of sync" indications received from Layer 1. Th
UCONNMODETIMER 010101 Specifications default value is 20. The value of this parameter is contained in SIB1 messages.
GUI Value Range:D1, D2, D4, D10, D20, D50, D100, D200
Unit:None
Actual Value Range:1, 2, 4, 10, 20, 50, 100, 200
Default Value:D50
N315 BSC6900 SET WRFD- 3GPP R9 Meaning:Maximum number of successive "in sync" indications received from Layer 1 after T3
UCONNMODETIMER 010101 Specifications protocol-defined default value is 1. The value of this parameter is contained in SIB1 message
GUI Value Range:D1, D2, D4, D10, D20, D50, D100, D200, D400, D600, D800, D1000
Unit:None
Actual Value Range:1, 2, 4, 10, 20, 50, 100, 200, 400, 600, 800, 1000
Default Value:D1
N315 BSC6910 SET WRFD- 3GPP R9 Meaning:Maximum number of successive "in sync" indications received from Layer 1 after T3
UCONNMODETIMER 010101 Specifications protocol-defined default value is 1. The value of this parameter is contained in SIB1 message
GUI Value Range:D1, D2, D4, D10, D20, D50, D100, D200, D400, D600, D800, D1000
Unit:None
Actual Value Range:1, 2, 4, 10, 20, 50, 100, 200, 400, 600, 800, 1000
Default Value:D1
T316 BSC6900 SET WRFD- 3GPP R9 Meaning:Timer 316. T316 starts when a UE is in the URA_PCH or CELL_PCH state and dete
UCONNMODETIMER 010101 Specifications area." T316 stops when the UE detects "in service area." When T316 expires, the UE initiate
procedure if it detects "in service area." If the UE detects "out of service area" when T316 ex
T317. Then, the UE will enter the CELL_FACH state and initiate cell update procedure when
service area." The protocol-defined default value is 30. The value of this parameter is contain
messages.
GUI Value Range:D0, D10, D20, D30, D40, D50, INFINITY
Unit:s
Actual Value Range:0, 10, 20, 30, 40, 50, INFINITY
Default Value:D30
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 20/31
2/6/2018 URA-Cell Update Feature Parameter Description
T316 BSC6910 SET WRFD- 3GPP R9 Meaning:Timer 316. T316 starts when a UE is in the URA_PCH or CELL_PCH state and dete
UCONNMODETIMER 010101 Specifications area." T316 stops when the UE detects "in service area." When T316 expires, the UE initiate
procedure if it detects "in service area." If the UE detects "out of service area" when T316 ex
T317. Then, the UE will enter the CELL_FACH state and initiate cell update procedure when
service area." The protocol-defined default value is 30. The value of this parameter is contain
messages.
GUI Value Range:D0, D10, D20, D30, D40, D50, INFINITY
Unit:s
Actual Value Range:0, 10, 20, 30, 40, 50, INFINITY
Default Value:D30
OptimizationSwitch BSC6900 SET WRFD- Intra RNC Cell Meaning:1)PAGGING_NUM_CTRL_SWITCH Maximum number of paging attempts in the RA
URRCTRLSWITCH 010801 Update response is received after a paging message is sent. 0: This switch is turned off. The paging
WRFD- Inter RNC Cell a maximum of 10 times. 1: This switch is turned on. The paging message is sent for a maxim
010802 Update 2)ASU_RL_RESET_SWITCH(Switch for RL Reestablishment During Soft Handover) Whethe
WRFD- Enhanced Fast link (RL) reestablishment during a soft handover. 1: This switch is turned on. A UE sends a C
020500 Dormancy message to the RNC and subsequently the RNC reestablishes the RL for the UE when both
conditions are met: -The RNC is waiting for the UE's response to the ACTIVE SET UPDATE
WRFD- Dynamic Channel
RNC detects that downlink transmission on signaling radio bearer (SRB2) is disconnected or
021101 Configuration Control
that all RLs for the UE are out of synchronization. 0: This switch is turned off. The RNC does
WRFD- (DCCC)
RL for the UE when the preceding conditions are met. 3)MC_RL_RESET_SWITCH(Switch fo
010510 3.4/6.8/13.6/27.2Kbps Reestablishment During Meas Control) Whether to trigger RL reestablishment during measur
WRFD- RRC Connection and This switch is turned on. A UE sends a CELL UPDATE message to the RNC and subsequen
011402 Radio Access Bearer reestablishes the RL for the UE when both of the following conditions are met: -The RNC has
WRFD- Establishment and MEASUREMENT CONTROL message to the UE. -The RNC detects that downlink transmiss
010651 Release disconnected when the UE state is stable. 0: This switch is turned off. The RNC does not ree
WRFD- Encryption the UE when the preceding conditions are met. 4)FD_PCH_REENTERSA_FORCE_RRC_RE
01061502 HSDPA over Iur Whether to enable the RNC to release the RRC connection of an EFD-capable UE that recei
Combination of One message from the PS domain of the CN if the UE sends the RNC a CELL UPDATE message
WRFD-
CS Service and Two service area. When this switch is turned on, the RNC releases the RRC connection of such a
01061504
PS Services preceding scenario. This solves the problem that a network becomes inaccessible when such
WRFD- service area. 1: This switch is turned on. The RNC directly releases the RRC connection afte
010301 Combination of One
CELL UPDATE message from the Enhanced Fast Dormancy-capable that leaves and then re
WRFD- CS Service and
area. 0: This switch is turned off. The RNC processes the CELL UPDATE message received
010507 Three PS Services
Fast Dormancy-capable UE that leaves and then reenters the service area.
Paging UE in Idle, 5)UE_CRC_COMPATIBLE_SWITCH. Whether the RNC normally releases connections when
CELL_PCH, cyclic redundancy check (CRC) on RB SETUP COMPLETE or RB RECONFIGURATION CO
URA_PCH State received from HSDPA UEs. 1: This switch is turned on. The RNC normally releases the conn
(Type 1) detects the failed CRC. 0: This switch is turned off. The RNC abnormally releases the connec
Rate Negotiation at detects the failed CRC. 6)RNC_P2D_DRD_SWITCH. Whether the RNC performs the directe
Admission Control (DRD) when it receives a CELL UPDATE message with the cause value "uplink data transmi
response" during UEs' state transition from CELL_PCH or URA_PCH to CELL_DCH. 1: This
The RNC performs the DRD in the preceding scenario. 0: This switch is turned off. The RNC
the DRD in the preceding scenario. 7)P2D_SWITCH Whether to transit a UE from the CELL_
state to the CELL_DCH state when the following conditions are met: the UE sends the RNC
message with the cause value "uplink data transmission" or "paging response"; the FACH in
UE camps now is congested or the UE is to set up a CS service. 1: This switch is turned on.
the UEs in CELL_PCH or URA_PCH state to directly transit to the CELL_DCH state in the pr
This switch is turned off. The RNC instructs the UEs in CELL_PCH or URA_PCH state to tran
CELL_FACH state in the preceding scenario. 8)AMR_F2D_OVERLAP_CELLUPT_SWITCH
proceeds with CS service setups involving state transitions from CELL_FACH to CELL_DCH
question report cell updates during the setup procedure. 1: This switch is turned on. The RNC
CELL UPDATE message and then proceeds with the CS service setup procedure. 0: This sw
The RNC processes the CELL UPDATE message and does not proceed with the CS service
in service setup failures. 9)SRB_RESET_RL_SETUP_SWITCH Whether the RNC reestablis
when it detects an SRB reset reported on Layer 2 for decreasing the number of UE call drops
turned on. The RNC reestablishes an RL when it detects the SRB reset. 0: This switch is turn
does not reestablish an RL when it detects the SRB reset. 10)RLFAIL_RL_SETUP_SWITCH
re-establishment is allowed after the radio link fails 1: This switch is turned on. Active link re-e
allowed after the RNC receives a RADIO LINK FAILURE INDICATION message and the time
RADIO LINK RESTORE INDICATION message from the NodeB expires. 0: This switch is tur
re-establishment is not allowed after the RNC receives a RADIO LINK FAILURE INDICATION
timer used to wait for a RADIO LINK RESTORE INDICATION message from the NodeB expi
11)CS_RL_SETUP_SWITCH Whether the RNC reestablishes a radio link (RL) when SRBs o
or all its RLs are out of synchronization. 1: This switch is turned on. The RNC reestablishes a
preceding scenario. 0: This switch is turned off. The RNC does not reestablish an RL in the p
12)PS_RL_SETUP_SWITCH 1: This switch is turned on. PS services can trigger active link r
This switch is turned off. PS services cannot trigger active link re-establishment. 13)UE_SRB
Whether the RNC reestablishes a radio link (RL) when it receives a CELL UPDATE message
information. 1: This switch is turned on. The RNC does not release the RRC connection and
RL. 0: This switch is turned off. The RNC releases the RRC connection. 14)RL_RESTORE_S
the radio link restoration timer 1: This switch is turned on. If there are CS services and the las
RNC waits for the radio link to restore before the timer T313 expires. 0: This switch is turned
services and the last radio link fails, the RNC waits for the radio link to restore before the orig
15)RNC_EFD_D2F_SWITCH Whether to enable RNC-level UE state transition from CELL_D
(D2F) for fast dormancy-capable UEs. 1: This switch is turned on. The D2F state transition is
dormancy-capable UEs.. 0: This switch is turned off. The state transition from CELL_DCH to
is enabled for the fast dormancy-capable UEs 16)RNC_RB_SCRI_NOT_DROP_SWITCH W
release due to SCRI during RB reconfiguration is calculated as a call drop 1: This switch is tu
release due to SCRI during reconfiguration is not calculated as a call drop. 0: This switch is t
release due to SCRI during reconfiguration is calculated as a call drop. 17)RRC_RECONN_S
the RNC to process the RRC connection setup requests from a UE. 1: This switch is turned o
releases the established RRC connection when the UE retransmits RRC connection setup re
switch is turned off. When the UE retransmits the RRC connection setup request to access th
RNC rejects the new RRC connection setup requests. When the UE retransmits the RRC con
request to access different cells, the RNC releases the established RRC connection. It is rec
parameter be set to its default value and the parameter value be not changed. If you need to
this parameter, ask for assistance from Huawei technical support personnel. 18)RRC_REPEA
Whether the RNC counts the number of retransmitted RRC connection setup requests in the
the RRC.AttConnEstab.Reg and RRC.AttConnEstab.Detac performance counters. 1: This sw
The RNC counts the number of retransmitted RRC connection setup requests in the measure
preceding performance counters. 0: This switch is turned off. The RNC does not count the nu
retransmitted RRC connection setup requests in the measurement of the two preceding perfo
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 21/31
2/6/2018 URA-Cell Update Feature Parameter Description
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 22/31
2/6/2018 URA-Cell Update Feature Parameter Description
OptimizationSwitch BSC6910 SET WRFD- Intra RNC Cell Meaning:1)PAGGING_NUM_CTRL_SWITCH Maximum number of paging attempts in the RA
URRCTRLSWITCH 010801 Update response is received after a paging message is sent. 0: This switch is turned off. The paging
WRFD- Inter RNC Cell a maximum of 10 times. 1: This switch is turned on. The paging message is sent for a maxim
010802 Update 2)ASU_RL_RESET_SWITCH(Switch for RL Reestablishment During Soft Handover) Whethe
WRFD- Enhanced Fast link (RL) reestablishment during a soft handover. 1: This switch is turned on. A UE sends a C
020500 Dormancy message to the RNC and subsequently the RNC reestablishes the RL for the UE when both
conditions are met: -The RNC is waiting for the UE's response to the ACTIVE SET UPDATE
WRFD- Dynamic Channel
RNC detects that downlink transmission on signaling radio bearer (SRB2) is disconnected or
021101 Configuration Control
that all RLs for the UE are out of synchronization. 0: This switch is turned off. The RNC does
WRFD- (DCCC)
RL for the UE when the preceding conditions are met. 3)MC_RL_RESET_SWITCH(Switch fo
010510 3.4/6.8/13.6/27.2Kbps Reestablishment During Meas Control) Whether to trigger RL reestablishment during measur
WRFD- RRC Connection and This switch is turned on. A UE sends a CELL UPDATE message to the RNC and subsequen
011402 Radio Access Bearer reestablishes the RL for the UE when both of the following conditions are met: -The RNC has
WRFD- Establishment and MEASUREMENT CONTROL message to the UE. -The RNC detects that downlink transmiss
010651 Release disconnected when the UE state is stable. 0: This switch is turned off. The RNC does not ree
WRFD- Encryption the UE when the preceding conditions are met. 4)FD_PCH_REENTERSA_FORCE_RRC_RE
01061502 HSDPA over Iur Whether to enable the RNC to release the RRC connection of an EFD-capable UE that recei
Combination of One message from the PS domain of the CN if the UE sends the RNC a CELL UPDATE message
WRFD-
CS Service and Two service area. When this switch is turned on, the RNC releases the RRC connection of such a
01061504
PS Services preceding scenario. This solves the problem that a network becomes inaccessible when such
WRFD- service area. 1: This switch is turned on. The RNC directly releases the RRC connection afte
010301 Combination of One
CELL UPDATE message from the Enhanced Fast Dormancy-capable that leaves and then re
WRFD- CS Service and
area. 0: This switch is turned off. The RNC processes the CELL UPDATE message received
010507 Three PS Services
Fast Dormancy-capable UE that leaves and then reenters the service area.
Paging UE in Idle, 5)UE_CRC_COMPATIBLE_SWITCH. Whether the RNC normally releases connections when
CELL_PCH, cyclic redundancy check (CRC) on RB SETUP COMPLETE or RB RECONFIGURATION CO
URA_PCH State received from HSDPA UEs. 1: This switch is turned on. The RNC normally releases the conn
(Type 1) detects the failed CRC. 0: This switch is turned off. The RNC abnormally releases the connec
Rate Negotiation at detects the failed CRC. 6)RNC_P2D_DRD_SWITCH. Whether the RNC performs the directe
Admission Control (DRD) when it receives a CELL UPDATE message with the cause value "uplink data transmi
response" during UEs' state transition from CELL_PCH or URA_PCH to CELL_DCH. 1: This
The RNC performs the DRD in the preceding scenario. 0: This switch is turned off. The RNC
the DRD in the preceding scenario. 7)P2D_SWITCH Whether to transit a UE from the CELL_
state to the CELL_DCH state when the following conditions are met: the UE sends the RNC
message with the cause value "uplink data transmission" or "paging response"; the FACH in
UE camps now is congested or the UE is to set up a CS service. 1: This switch is turned on.
the UEs in CELL_PCH or URA_PCH state to directly transit to the CELL_DCH state in the pr
This switch is turned off. The RNC instructs the UEs in CELL_PCH or URA_PCH state to tran
CELL_FACH state in the preceding scenario. 8)AMR_F2D_OVERLAP_CELLUPT_SWITCH
proceeds with CS service setups involving state transitions from CELL_FACH to CELL_DCH
question report cell updates during the setup procedure. 1: This switch is turned on. The RNC
CELL UPDATE message and then proceeds with the CS service setup procedure. 0: This sw
The RNC processes the CELL UPDATE message and does not proceed with the CS service
in service setup failures. 9)SRB_RESET_RL_SETUP_SWITCH Whether the RNC reestablis
when it detects an SRB reset reported on Layer 2 for decreasing the number of UE call drops
turned on. The RNC reestablishes an RL when it detects the SRB reset. 0: This switch is turn
does not reestablish an RL when it detects the SRB reset. 10)RLFAIL_RL_SETUP_SWITCH
re-establishment is allowed after the radio link fails 1: This switch is turned on. Active link re-e
allowed after the RNC receives a RADIO LINK FAILURE INDICATION message and the time
RADIO LINK RESTORE INDICATION message from the NodeB expires. 0: This switch is tur
re-establishment is not allowed after the RNC receives a RADIO LINK FAILURE INDICATION
timer used to wait for a RADIO LINK RESTORE INDICATION message from the NodeB expi
11)CS_RL_SETUP_SWITCH Whether the RNC reestablishes a radio link (RL) when SRBs o
or all its RLs are out of synchronization. 1: This switch is turned on. The RNC reestablishes a
preceding scenario. 0: This switch is turned off. The RNC does not reestablish an RL in the p
12)PS_RL_SETUP_SWITCH 1: This switch is turned on. PS services can trigger active link r
This switch is turned off. PS services cannot trigger active link re-establishment. 13)UE_SRB
Whether the RNC reestablishes a radio link (RL) when it receives a CELL UPDATE message
information. 1: This switch is turned on. The RNC does not release the RRC connection and
RL. 0: This switch is turned off. The RNC releases the RRC connection. 14)RL_RESTORE_S
the radio link restoration timer 1: This switch is turned on. If there are CS services and the las
RNC waits for the radio link to restore before the timer T313 expires. 0: This switch is turned
services and the last radio link fails, the RNC waits for the radio link to restore before the orig
15)RNC_EFD_D2F_SWITCH Whether to enable RNC-level UE state transition from CELL_D
(D2F) for fast dormancy-capable UEs. 1: This switch is turned on. The D2F state transition is
dormancy-capable UEs.. 0: This switch is turned off. The state transition from CELL_DCH to
is enabled for the fast dormancy-capable UEs 16)RNC_RB_SCRI_NOT_DROP_SWITCH W
release due to SCRI during RB reconfiguration is calculated as a call drop 1: This switch is tu
release due to SCRI during reconfiguration is not calculated as a call drop. 0: This switch is t
release due to SCRI during reconfiguration is calculated as a call drop. 17)RRC_RECONN_S
the RNC to process the RRC connection setup requests from a UE. 1: This switch is turned o
releases the established RRC connection when the UE retransmits RRC connection setup re
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 23/31
2/6/2018 URA-Cell Update Feature Parameter Description
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 24/31
2/6/2018 URA-Cell Update Feature Parameter Description
T381 BSC6900 SET WRFD- 3GPP R9 Meaning:T381 is started after the RNC send message "RRC CONNECTION SETUP"(or "CE
UCONNMODETIMER 010101 Specifications CONFIRM"). If T381 expire and RNC does not receive "RRC CONNECTION SETUP COMPL
response of "CELL UPDATE CONFIRM") and V381 is smaller than N381, RNC resend "RRC
SETUP"(or "CELL UPDATE CONFIRM") and restart timer T381 and increase V381. If RNC r
CONNECTION SETUP COMPLETE"(or the response of "CELL UPDATE CONFIRM"), T381
Default value is 600ms.
GUI Value Range:D0, D100, D200, D300, D400, D500, D600, D700, D800, D900, D1000, D1
Unit:ms
Actual Value Range:0, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1000, 1200, 1500, 2000
Default Value:D600
T381 BSC6910 SET WRFD- 3GPP R9 Meaning:T381 is started after the RNC send message "RRC CONNECTION SETUP"(or "CE
UCONNMODETIMER 010101 Specifications CONFIRM"). If T381 expire and RNC does not receive "RRC CONNECTION SETUP COMPL
response of "CELL UPDATE CONFIRM") and V381 is smaller than N381, RNC resend "RRC
SETUP"(or "CELL UPDATE CONFIRM") and restart timer T381 and increase V381. If RNC r
CONNECTION SETUP COMPLETE"(or the response of "CELL UPDATE CONFIRM"), T381
Default value is 600ms.
GUI Value Range:D0, D100, D200, D300, D400, D500, D600, D700, D800, D900, D1000, D1
Unit:ms
Actual Value Range:0, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1000, 1200, 1500, 2000
Default Value:D600
MaxFachPower BSC6900 ADD UFACH WRFD- Open Loop Power Meaning:The offset between the FACH transmit power and P-CPICH transmit power in a cell
MOD UFACH 020501 Control information of this parameter, see 3GPP TS 25.433.
GUI Value Range:-350~150
Unit:0.1dB
Actual Value Range:-35~15
Default Value:10
MaxFachPower BSC6910 ADD UFACH WRFD- Open Loop Power Meaning:The offset between the FACH transmit power and P-CPICH transmit power in a cell
MOD UFACH 020501 Control information of this parameter, see 3GPP TS 25.433.
GUI Value Range:-350~150
Unit:0.1dB
Actual Value Range:-35~15
Default Value:10
OffsetFACHPower BSC6900 ADD UFACH WRFD- 3.4/6.8/13.6/27.2Kbps Meaning:Specifies the offset of the initial FACH power to the maximum FACH transmit power
MOD UFACH 010510 RRC Connection and power is calculated using the offset based on the following formula: "MaxFACHPower" - Offse
Radio Access Bearer Note:To configure this parameter, the actual value of the initial FACH power ranges from -35
Establishment and Otherwise, the value is 0. For details, see 3GPP TS 25.433.
Release GUI Value Range:0~255
Unit:0.1dB
Actual Value Range:0~25.5
Default Value:0
OffsetFACHPower BSC6910 ADD UFACH WRFD- 3.4/6.8/13.6/27.2Kbps Meaning:Specifies the offset of the initial FACH power to the maximum FACH transmit power
MOD UFACH 010510 RRC Connection and power is calculated using the offset based on the following formula: "MaxFACHPower" - Offse
Radio Access Bearer Note:To configure this parameter, the actual value of the initial FACH power ranges from -35
Establishment and Otherwise, the value is 0. For details, see 3GPP TS 25.433.
Release GUI Value Range:0~255
Unit:0.1dB
Actual Value Range:0~25.5
Default Value:0
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 25/31
2/6/2018 URA-Cell Update Feature Parameter Description
DlOlcTrigThd BSC6900 ADD UCELLLDM WRFD- Overload Control Meaning:Threshold for triggering downlink OLC. If the ratio of the downlink load to the downl
MOD UCELLLDM 020107 Load Measurement higher than or equal to this threshold for a duration longer than that specified by the "DlLdTrn
WRFD- parameter, downlink OLC (overload state) is triggered and OLC actions are performed to red
020102 The recommended value difference between "DlOlcRelThd" and "DlOlcTrigThd" is higher tha
load fluctuates. Otherwise, a cell frequently enters and leaves the overload state.
GUI Value Range:0~100
Unit:%
Actual Value Range:0~100
Default Value:95
DlOlcTrigThd BSC6910 ADD UCELLLDM WRFD- Overload Control Meaning:Threshold for triggering downlink OLC. If the ratio of the downlink load to the downl
MOD UCELLLDM 020107 Load Measurement higher than or equal to this threshold for a duration longer than that specified by the "DlLdTrn
WRFD- parameter, downlink OLC (overload state) is triggered and OLC actions are performed to red
020102 The recommended value difference between "DlOlcRelThd" and "DlOlcTrigThd" is higher tha
load fluctuates. Otherwise, a cell frequently enters and leaves the overload state.
GUI Value Range:0~100
Unit:%
Actual Value Range:0~100
Default Value:95
6 Counters
Table 6-1 Counter description
67179057 VS.AttCommTrChResIur.Tx Number of Common BSC6900 WRFD-010802 Inter RNC Cell Update
Transport Channel
Resource Requests Sent
by SRNC on Iur Interface
67179058 VS.SuccCommTrChResIur.Rx Number of Common BSC6900 WRFD-010802 Inter RNC Cell Update
Transport Channel
Resource Responses
Received by SRNC on Iur
Interface
67179059 VS.FailCommTrChResIur.NotSupp.Rx Number of Common BSC6900 WRFD-010802 Inter RNC Cell Update
Transport Channel
Resource Failures Due to
Transport Resource
Unavailable on Iur
Interface for SRNC
67179060 VS.AttRelCommTrChResIur.Tx Number of Common BSC6900 WRFD-010802 Inter RNC Cell Update
Transport Channel
Resource Release
Requests on Iur Interface
from SRNC
67179119 VS.IUR.AttComTraChResDRNC Number of Common BSC6900 WRFD-010802 Inter RNC Cell Update
Transport Channel
Resource Requests on Iur
Interface for DRNC
67179120 VS.IUR.SuccComTraChResDRNC Number of Common BSC6900 WRFD-010802 Inter RNC Cell Update
Transport Channel
Resource Responses on
Iur Interface for DRNC
67179121 VS.IUR.FailCTCRDRNC.NotSupp Number of Common BSC6900 WRFD-010802 Inter RNC Cell Update
Transport Channel
Resource Failures Due to
Transport Resource
Unavailable on Iur
Interface for DRNC
67179122 VS.IUR.AttRelCoTrChResDRNC Number of Common BSC6900 WRFD-010802 Inter RNC Cell Update
Transport Channel
Resource Release
Requests on Iur Interface
for DRNC
67180370 VS.CellUpdt.Confirm Number of CELL BSC6900 WRFD-010801 Intra RNC Cell Update
UPDATE CONFIRM WRFD-010802 Inter RNC Cell Update
Messages from SRNC for
Cell
67180371 VS.SuccCellUpdt Number of Successful BSC6900 WRFD-010801 Intra RNC Cell Update
Cell Updates for Cell WRFD-010802 Inter RNC Cell Update
67180372 VS.AttCellUpdt.Prd Number of Periodical Cell BSC6900 WRFD-010801 Intra RNC Cell Update
Updates for Cell WRFD-010802 Inter RNC Cell Update
67180373 VS.AttCellUpdt.Resel Number of Cell Updates BSC6900 WRFD-010801 Intra RNC Cell Update
Due to Cell Reselection WRFD-010802 Inter RNC Cell Update
for Cell
67180374 VS.AttCellUpdt.RSA Number of Cell Updates BSC6900 WRFD-010801 Intra RNC Cell Update
Due to Re-Entering WRFD-010802 Inter RNC Cell Update
Service Area for Cell
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 26/31
2/6/2018 URA-Cell Update Feature Parameter Description
67180375 VS.AttCellUpdt.PageRsp Number of Cell Updates BSC6900 WRFD-010801 Intra RNC Cell Update
Due to Paging Response WRFD-010802 Inter RNC Cell Update
for Cell
67180376 VS.AttCellUpdt.ULDataTrans Number of Cell Updates BSC6900 WRFD-010801 Intra RNC Cell Update
Due to Uplink Data WRFD-010802 Inter RNC Cell Update
Transmission for Cell
67180378 VS.AttCellUpdt.RLFail Number of Cell Updates BSC6900 WRFD-010801 Intra RNC Cell Update
Due to Radio Link Failure WRFD-010802 Inter RNC Cell Update
for Cell
67180379 VS.SuccCellUpdt.Prd Number of Successful BSC6900 WRFD-010801 Intra RNC Cell Update
Periodical Cell Updates WRFD-010802 Inter RNC Cell Update
for Cell
67180380 VS.SuccCellUpdt.Resel Number of Successful BSC6900 WRFD-010801 Intra RNC Cell Update
Cell Updates Due to Cell WRFD-010802 Inter RNC Cell Update
Reselection for Cell
67180381 VS.SuccCellUpdt.Rsa Number of Successful BSC6900 WRFD-010801 Intra RNC Cell Update
Cell Updates Due to Re- WRFD-010802 Inter RNC Cell Update
Entering Service Area for
Cell
67180382 VS.SuccCellUpdt.PageRsp Number of Successful BSC6900 WRFD-010801 Intra RNC Cell Update
Cell Updates Due to WRFD-010802 Inter RNC Cell Update
Paging Response for Cell
67180383 VS.SuccCellUpdt.ULDataTrans Number of Successful BSC6900 WRFD-010801 Intra RNC Cell Update
Cell Updates Due to WRFD-010802 Inter RNC Cell Update
Uplink Data Transmission
for Cell
67180386 VS.CellUpdt.RRCRel Number of RRC BSC6900 WRFD-010801 Intra RNC Cell Update
Connection Releases Due WRFD-010802 Inter RNC Cell Update
to Cell Update Failure for WRFD-010510 3.4/6.8/13.6/27.2Kbps
Cell RRC Connection and
Radio Access Bearer
Establishment and
Release
67180453 VS.SuccURAUpd.Chg Number of Successful BSC6900 WRFD-010901 Intra RNC URA Update
URA Updates Due to WRFD-010902 Inter RNC URA Update
Change of URA for Cell WRFD-010202 UE State in Connected
Mode (CELL-DCH, CELL-
PCH, URA-PCH, CELL-
FACH)
67180454 VS.SuccURAUpd.Prd Number of Successful BSC6900 WRFD-010901 Intra RNC URA Update
URA Updates Due to WRFD-010902 Inter RNC URA Update
Periodic URA Update for WRFD-010202 UE State in Connected
Cell Mode (CELL-DCH, CELL-
PCH, URA-PCH, CELL-
FACH)
67189767 VS.SuccCellUpdt.RLFail Number of Successful BSC6900 WRFD-010801 Intra RNC Cell Update
Cell Updates Due to WRFD-010802 Inter RNC Cell Update
Radio Link Failure for Cell
67189768 VS.FailCellUpdt.RLFail.NoReply Number of Failed Cell BSC6900 WRFD-010801 Intra RNC Cell Update
Updates Due to No WRFD-010802 Inter RNC Cell Update
Response from UE for
Cell (Cell Update Caused
by RL Failure)
67192569 VS.AttCellUpdt Number of Cell Updates BSC6900 WRFD-010801 Intra RNC Cell Update
for Cell WRFD-010802 Inter RNC Cell Update
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 27/31
2/6/2018 URA-Cell Update Feature Parameter Description
67192570 VS.AttCellUpdt.ErrSRB Number of Cell Updates BSC6900 WRFD-010801 Intra RNC Cell Update
Due to SRB RLC WRFD-010802 Inter RNC Cell Update
Unrecoverable Error for
Cell
67192571 VS.AttCellUpdt.ErrTRB Number of Cell Updates BSC6900 WRFD-010801 Intra RNC Cell Update
Due to TRB RLC WRFD-010802 Inter RNC Cell Update
Unrecoverable Error for
Cell
67192572 VS.SuccCellUpdt.ErrTRB Number of Successful BSC6900 WRFD-010801 Intra RNC Cell Update
Cell Updates Due to TRB WRFD-010802 Inter RNC Cell Update
RLC Unrecoverable Error
for Cell
67192573 VS.AttCellUpdt.MbmsRecv Number of Cell Updates BSC6900 WRFD-010801 Intra RNC Cell Update
Due to MBMS Reception WRFD-010802 Inter RNC Cell Update
for Cell WRFD-010616 MBMS Introduction
Package
67192574 VS.SuccCellUpdt.MbmsRecv Number of Successful BSC6900 WRFD-010801 Intra RNC Cell Update
Cell Updates Due to WRFD-010802 Inter RNC Cell Update
MBMS Reception for Cell WRFD-010616 MBMS Introduction
Package
67192575 VS.AttCellUpdt.MbmsPtpRbReq Number of Cell Updates BSC6900 WRFD-010801 Intra RNC Cell Update
Due to MBMS PtP RB WRFD-010802 Inter RNC Cell Update
Request for Cell WRFD-010616 MBMS Introduction
Package
67192576 VS.SuccCellUpdt.MbmsPtpRbReq Number of Successful BSC6900 WRFD-010801 Intra RNC Cell Update
Cell Updates Due to WRFD-010802 Inter RNC Cell Update
MBMS PtP RB Request WRFD-010616 MBMS Introduction
for Cell Package
73423781 VS.SuccCellUpdt.ErrSRB Number of Successful BSC6900 WRFD-010801 Intra RNC Cell Update
Cell Updates Due to SRB WRFD-010802 Inter RNC Cell Update
RLC Unrecoverable Error
for Cell
73424125 VS.FailCellUpdt.ErrSRB.NoReply.FACH Number of Cell Update BSC6900 WRFD-010801 Intra RNC Cell Update
Failures due to No WRFD-010802 Inter RNC Cell Update
Response from UEs in
the CELL_FACH State
(SRB RLC ERROR) for
Cell
73424126 VS.FailCellUpdt.ErrTRB.NoReply.FACH Number of Cell Update BSC6900 WRFD-010801 Intra RNC Cell Update
Failures due to No WRFD-010802 Inter RNC Cell Update
Response from UEs in
the CELL_FACH State
(TRB RLC ERROR)for
Cell
73426327 VS.AttCellUpdt.OrgConvCall.PCH Number of Cell Update BSC6900 WRFD-010801 Intra RNC Cell Update
Attempts for Cell WRFD-010802 Inter RNC Cell Update
(Originating
Conversational Call)
73426328 VS.AttCellUpdt.TmConvCall.PCH Number of Cell Update BSC6900 WRFD-010801 Intra RNC Cell Update
Attempts for Cell WRFD-010802 Inter RNC Cell Update
(Terminating
Conversational Call)
73426329 VS.AttCellUpdt.EmgCall.PCH Number of Cell Update BSC6900 WRFD-010801 Intra RNC Cell Update
Attempts for Cell WRFD-010802 Inter RNC Cell Update
(Emergency Call)
73426330 VS.SuccCellUpdt.OrgConvCall.PCH Number of Successful BSC6900 WRFD-010801 Intra RNC Cell Update
Cell Updates for Cell WRFD-010802 Inter RNC Cell Update
(Originating
Conversational Call)
73426331 VS.SuccCellUpdt.TmConvCall.PCH Number of Successful BSC6900 WRFD-010801 Intra RNC Cell Update
Cell Updates for Cell WRFD-010802 Inter RNC Cell Update
(Terminating
Conversational Call)
73426332 VS.SuccCellUpdt.EmgCall.PCH Number of Successful BSC6900 WRFD-010801 Intra RNC Cell Update
Cell Updates for Cell WRFD-010802 Inter RNC Cell Update
(Emergency Call)
67179057 VS.AttCommTrChResIur.Tx Number of Common BSC6910 WRFD-010802 Inter RNC Cell Update
Transport Channel
Resource Requests Sent
by SRNC on Iur Interface
67179058 VS.SuccCommTrChResIur.Rx Number of Common BSC6910 WRFD-010802 Inter RNC Cell Update
Transport Channel
Resource Responses
Received by SRNC on Iur
Interface
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 28/31
2/6/2018 URA-Cell Update Feature Parameter Description
67179059 VS.FailCommTrChResIur.NotSupp.Rx Number of Common BSC6910 WRFD-010802 Inter RNC Cell Update
Transport Channel
Resource Failures Due to
Transport Resource
Unavailable on Iur
Interface for SRNC
67179060 VS.AttRelCommTrChResIur.Tx Number of Common BSC6910 WRFD-010802 Inter RNC Cell Update
Transport Channel
Resource Release
Requests on Iur Interface
from SRNC
67179119 VS.IUR.AttComTraChResDRNC Number of Common BSC6910 WRFD-010802 Inter RNC Cell Update
Transport Channel
Resource Requests on Iur
Interface for DRNC
67179120 VS.IUR.SuccComTraChResDRNC Number of Common BSC6910 WRFD-010802 Inter RNC Cell Update
Transport Channel
Resource Responses on
Iur Interface for DRNC
67179121 VS.IUR.FailCTCRDRNC.NotSupp Number of Common BSC6910 WRFD-010802 Inter RNC Cell Update
Transport Channel
Resource Failures Due to
Transport Resource
Unavailable on Iur
Interface for DRNC
67179122 VS.IUR.AttRelCoTrChResDRNC Number of Common BSC6910 WRFD-010802 Inter RNC Cell Update
Transport Channel
Resource Release
Requests on Iur Interface
for DRNC
67180370 VS.CellUpdt.Confirm Number of CELL BSC6910 WRFD-010801 Intra RNC Cell Update
UPDATE CONFIRM WRFD-010802 Inter RNC Cell Update
Messages from SRNC for
Cell
67180371 VS.SuccCellUpdt Number of Successful BSC6910 WRFD-010801 Intra RNC Cell Update
Cell Updates for Cell WRFD-010802 Inter RNC Cell Update
67180372 VS.AttCellUpdt.Prd Number of Periodical Cell BSC6910 WRFD-010801 Intra RNC Cell Update
Updates for Cell WRFD-010802 Inter RNC Cell Update
67180373 VS.AttCellUpdt.Resel Number of Cell Updates BSC6910 WRFD-010801 Intra RNC Cell Update
Due to Cell Reselection WRFD-010802 Inter RNC Cell Update
for Cell
67180374 VS.AttCellUpdt.RSA Number of Cell Updates BSC6910 WRFD-010801 Intra RNC Cell Update
Due to Re-Entering WRFD-010802 Inter RNC Cell Update
Service Area for Cell
67180375 VS.AttCellUpdt.PageRsp Number of Cell Updates BSC6910 WRFD-010801 Intra RNC Cell Update
Due to Paging Response WRFD-010802 Inter RNC Cell Update
for Cell
67180376 VS.AttCellUpdt.ULDataTrans Number of Cell Updates BSC6910 WRFD-010801 Intra RNC Cell Update
Due to Uplink Data WRFD-010802 Inter RNC Cell Update
Transmission for Cell
67180378 VS.AttCellUpdt.RLFail Number of Cell Updates BSC6910 WRFD-010801 Intra RNC Cell Update
Due to Radio Link Failure WRFD-010802 Inter RNC Cell Update
for Cell
67180379 VS.SuccCellUpdt.Prd Number of Successful BSC6910 WRFD-010801 Intra RNC Cell Update
Periodical Cell Updates WRFD-010802 Inter RNC Cell Update
for Cell
67180380 VS.SuccCellUpdt.Resel Number of Successful BSC6910 WRFD-010801 Intra RNC Cell Update
Cell Updates Due to Cell WRFD-010802 Inter RNC Cell Update
Reselection for Cell
67180381 VS.SuccCellUpdt.Rsa Number of Successful BSC6910 WRFD-010801 Intra RNC Cell Update
Cell Updates Due to Re- WRFD-010802 Inter RNC Cell Update
Entering Service Area for
Cell
67180382 VS.SuccCellUpdt.PageRsp Number of Successful BSC6910 WRFD-010801 Intra RNC Cell Update
Cell Updates Due to WRFD-010802 Inter RNC Cell Update
Paging Response for Cell
67180383 VS.SuccCellUpdt.ULDataTrans Number of Successful BSC6910 WRFD-010801 Intra RNC Cell Update
Cell Updates Due to WRFD-010802 Inter RNC Cell Update
Uplink Data Transmission
for Cell
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 29/31
2/6/2018 URA-Cell Update Feature Parameter Description
67180386 VS.CellUpdt.RRCRel Number of RRC BSC6910 WRFD-010801 Intra RNC Cell Update
Connection Releases Due WRFD-010802 Inter RNC Cell Update
to Cell Update Failure for WRFD-010510 3.4/6.8/13.6/27.2Kbps
Cell RRC Connection and
Radio Access Bearer
Establishment and
Release
67180453 VS.SuccURAUpd.Chg Number of Successful BSC6910 WRFD-010901 Intra RNC URA Update
URA Updates Due to WRFD-010902 Inter RNC URA Update
Change of URA for Cell WRFD-010202 UE State in Connected
Mode (CELL-DCH, CELL-
PCH, URA-PCH, CELL-
FACH)
67180454 VS.SuccURAUpd.Prd Number of Successful BSC6910 WRFD-010901 Intra RNC URA Update
URA Updates Due to WRFD-010902 Inter RNC URA Update
Periodic URA Update for WRFD-010202 UE State in Connected
Cell Mode (CELL-DCH, CELL-
PCH, URA-PCH, CELL-
FACH)
67189767 VS.SuccCellUpdt.RLFail Number of Successful BSC6910 WRFD-010801 Intra RNC Cell Update
Cell Updates Due to WRFD-010802 Inter RNC Cell Update
Radio Link Failure for Cell
67189768 VS.FailCellUpdt.RLFail.NoReply Number of Failed Cell BSC6910 WRFD-010801 Intra RNC Cell Update
Updates Due to No WRFD-010802 Inter RNC Cell Update
Response from UE for
Cell (Cell Update Caused
by RL Failure)
67192569 VS.AttCellUpdt Number of Cell Updates BSC6910 WRFD-010801 Intra RNC Cell Update
for Cell WRFD-010802 Inter RNC Cell Update
67192570 VS.AttCellUpdt.ErrSRB Number of Cell Updates BSC6910 WRFD-010801 Intra RNC Cell Update
Due to SRB RLC WRFD-010802 Inter RNC Cell Update
Unrecoverable Error for
Cell
67192571 VS.AttCellUpdt.ErrTRB Number of Cell Updates BSC6910 WRFD-010801 Intra RNC Cell Update
Due to TRB RLC WRFD-010802 Inter RNC Cell Update
Unrecoverable Error for
Cell
67192572 VS.SuccCellUpdt.ErrTRB Number of Successful BSC6910 WRFD-010801 Intra RNC Cell Update
Cell Updates Due to TRB WRFD-010802 Inter RNC Cell Update
RLC Unrecoverable Error
for Cell
67192573 VS.AttCellUpdt.MbmsRecv Number of Cell Updates BSC6910 WRFD-010801 Intra RNC Cell Update
Due to MBMS Reception WRFD-010802 Inter RNC Cell Update
for Cell WRFD-010616 MBMS Introduction
Package
67192574 VS.SuccCellUpdt.MbmsRecv Number of Successful BSC6910 WRFD-010801 Intra RNC Cell Update
Cell Updates Due to WRFD-010802 Inter RNC Cell Update
MBMS Reception for Cell WRFD-010616 MBMS Introduction
Package
67192575 VS.AttCellUpdt.MbmsPtpRbReq Number of Cell Updates BSC6910 WRFD-010801 Intra RNC Cell Update
Due to MBMS PtP RB WRFD-010802 Inter RNC Cell Update
Request for Cell WRFD-010616 MBMS Introduction
Package
67192576 VS.SuccCellUpdt.MbmsPtpRbReq Number of Successful BSC6910 WRFD-010801 Intra RNC Cell Update
Cell Updates Due to WRFD-010802 Inter RNC Cell Update
MBMS PtP RB Request WRFD-010616 MBMS Introduction
for Cell Package
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 30/31
2/6/2018 URA-Cell Update Feature Parameter Description
73423781 VS.SuccCellUpdt.ErrSRB Number of Successful BSC6910 WRFD-010801 Intra RNC Cell Update
Cell Updates Due to SRB WRFD-010802 Inter RNC Cell Update
RLC Unrecoverable Error
for Cell
73424125 VS.FailCellUpdt.ErrSRB.NoReply.FACH Number of Cell Update BSC6910 WRFD-010801 Intra RNC Cell Update
Failures due to No WRFD-010802 Inter RNC Cell Update
Response from UEs in
the CELL_FACH State
(SRB RLC ERROR)for
Cell
73424126 VS.FailCellUpdt.ErrTRB.NoReply.FACH Number of Cell Update BSC6910 WRFD-010801 Intra RNC Cell Update
Failures due to No WRFD-010802 Inter RNC Cell Update
Response from UEs in
the CELL_FACH State
(TRB RLC ERROR)for
Cell
73426327 VS.AttCellUpdt.OrgConvCall.PCH Number of Cell Update BSC6910 WRFD-010801 Intra RNC Cell Update
Attempts for Cell WRFD-010802 Inter RNC Cell Update
(Originating
Conversational Call)
73426328 VS.AttCellUpdt.TmConvCall.PCH Number of Cell Update BSC6910 WRFD-010801 Intra RNC Cell Update
Attempts for Cell WRFD-010802 Inter RNC Cell Update
(Terminating
Conversational Call)
73426329 VS.AttCellUpdt.EmgCall.PCH Number of Cell Update BSC6910 WRFD-010801 Intra RNC Cell Update
Attempts for Cell WRFD-010802 Inter RNC Cell Update
(Emergency Call)
73426330 VS.SuccCellUpdt.OrgConvCall.PCH Number of Successful BSC6910 WRFD-010801 Intra RNC Cell Update
Cell Updates for Cell WRFD-010802 Inter RNC Cell Update
(Originating
Conversational Call)
73426331 VS.SuccCellUpdt.TmConvCall.PCH Number of Successful BSC6910 WRFD-010801 Intra RNC Cell Update
Cell Updates for Cell WRFD-010802 Inter RNC Cell Update
(Terminating
Conversational Call)
73426332 VS.SuccCellUpdt.EmgCall.PCH Number of Successful BSC6910 WRFD-010801 Intra RNC Cell Update
Cell Updates for Cell WRFD-010802 Inter RNC Cell Update
(Emergency Call)
7 Glossary
For the acronyms, abbreviations, terms, and definitions, see the Glossary.
8 Reference Documents
1. 3GPP TS 25.331, "Radio Resource Control (RRC); protocol specification"
2. 3GPP TS 25.931, "UTRAN Functions, Examples on Signaling Procedures"
3. 3GPP TS 25.413, "UTRAN Iu interface RANAP signaling"
4. UE Behaviors in Idle Mode Feature Parameter Description
5. BSC6900 UMTS Initial Configuration Guide
6. BSC6910 UMTS Initial Configuration Guide
http://localhost:7890/hdx.cgi?fe=0&lib=GEC0207J&v=04&homepage=resources%2Fhedex-homepage.html 31/31