You are on page 1of 1

Legend: Installation

1. Execution of construction work by building manufacturers / construction company


Cons. Designation Detailed plan Dimensions
fixed electrical connection
number
IT OPTION
1-phase socket 230V/16A/B, separate fuse for IT devices 1.1320 I-beam IPE 80 E-D-BA-06
1.1325 I-beam IPE 160 E-D-BA-06
1-phasen socket 230V/16A/C 1.3500 Van sectional door, electic operated Minium clearance width 4.00 m;
A
closing edge protection and light barrier Clearance height 4.00 m
socket combination type A (2x1-phase socket 230V/16A/C; 1x3-phase socket 400V/16A/C; 1.3600 Controller unit and switch cabinet for door Integrated open/stop/close/key function lock/
B time relay
socket combination type B (2x1-phase socket 230V/16A/C; 1x3-phase 400V/16A/C; 1.3602 External door controller radar presence sensing; make Herkules / 231
1x3-phase socket 400V/32A/C) reference number F531.31710

1 2 3 4 5 6 7
modem dual connection RJ45 1.3650 Traffic light as entrance and exit help yellow flash signal with door movement
1.6023 PVC empty tube D = 100 mm; with 2 pull wire
1.6025 PVC empty tube D = 150 mm; with 2 pull wire
WLAN-receiver
90° arch = use 3 x 30° arch
Important:
Öl compressed air removal valve (safty valve for 1/2" air pressure managment) Observe assembly dimension/specification of manufacturer
5.10 5.10 5.10 5.10 5.10 5.10 DL
inclusive ball valve; oiler, 1xoiled und 1xunoiled 8 bar
compressed air connection ball valve; 8 bar
Clarify emergency exits with trade supervisory center
Washing facility planned
Installation of vehicle lift section according to structural engineer
W
water connection ball valve; 3/4" Design load to statical analysis specifications
1.3650
1.3600 A energy power unit for colum lifting (2x1-phase socket 230V/16A/C) 2. Installation by building manufacturers / installation company
Cons. Designation Dimensions /
1.3500 1.3602 Door width 2.0702 Door width Door width Door width Door width energy power unit (3x1-phase socket 230V/16A/C) number technical data
min. clearance 4.00 m min. clearance 4.00 m min. clearance 4.00 m min. clearance 4.00 m min. clearance 4.00 m 2.0295 Cable truss
Door height Door height Door height Door height Door height

A
2.0363 Connection of power supply unit 2x1-phase socket 230V/16A
-0.03 twin compressed air removal valve (safty valve with push button for 1/2" air pressure managment)
clearance 4.00 m clearance 4.00 m clearance 4.00 m clearance 4.00 m clearance 4.00 m 2.0364 Connection of power supply unit 3x1-phase socket 230V/16A
20

2.0517 Socket combination, type A with cutout 2x1-phase socket 230V/16A and
DL 3.8113 upper edge 1x3-phase socket 400V/16A
2.0731 3.6730 3.8100 3 x 3.8102 2.0715 2.0715 2.0730 empty tube +0,05 Fab. Mennekes reference number 920005 or

80
DL +0.00
emergency

3.1373 2.0728 3.1319 3.1307 3.1332 +0.00 3.1352 * Minimum dimension for achieving optimum assessment according of the same value
lower edge + 5,60

lower edge + 5,60

lower edge + 5,60

lower edge + 5,60

lower edge + 5,60

lower edge + 5,60


2.0518 Socket combination, type B with cutout 2x1-phase socket 230V/16A,
to the Criteria Catalog
*2.00

2.00
1x3-phase socket 400V/16A and
exit

workplace 1.6025

2.00
2.5100 1x3-phase socket 400V/32A
light strip

light strip

light strip

light strip

light strip

light strip
1.6023 1.6023 1.6023 1.6023 Fab. Mennekes reference number 930010 or

wheel alignment This incudes plan no. of the same value

E-T01a Van repaie area with box (section) 2.0610 socket / double socket / multi socket 1-phase socket 230V/16A/B

with support arms; Lifting capacity 6.5 t


separate fuse for IT devices
Van 4-inground-lift for wheel alignment

Van 2-inground lifting platform

Van 6-inground lifting platform


E-T09 Headlight adjusting work bay Van

with ramps and support arms

with ramps and support arms


Van 4-post lifting for chasis alignment
light-band lower edge + 4,50

2.0702 Electrical connection, door via socket 1-phase socket 230V/16A/t

light-band lower edge + 4,50

light-band lower edge + 4,50

light-band lower edge + 4,50

light-band lower edge + 4,50

light-band lower edge + 4,50


Van 2-inground lifting platform

Van 2-inground lifting platform


2.0707 Electrical connection, waste oil pump 3x16A/t (0,55 -0,75 kW) see manufacturer
E-D02 Roof case OPTION
with ramps; Lifting capacity 5.0 t or 6.5 t

with ramps; Lifting capacity 5,0 t or 6.5 t

E-D03 Power connection unit 2.0708


2.0709
Electrical connection, oil data recording system
Electrical connection, pump antifreeze lines used
230V/16A
230V/16A

with ramps Tragkraft 6,5 t


E-D-BA-06 Rails for headlight adjusting

6.20

6.20

6.20

6.20
2.0715 Electrical connection, van 2-inground lift 3x16A/t (1,5-6,0 kW)

Lifting capacity 6.0 - 6.5 t


E-I 01 Notes / Information
2.0716 Electrical connection, exhaust smoke fan 3x16A/t (0,85 - 2,2 kW) see manufacturer

Lifting capacity 5.0 t


OPTION unembodied
2.0717 Electrical connection, van 4-post lift 3x16A/t (7,5 kW)
2.0723 Electrical connection, van 2-post lift 3x16-25A/t (3,0-7,0 kW) see manufacturer
L=7.35 W=2.00 H=max. vehicle height 3.35 (Sprinter with cool box)

2.0728 Electrical connection, van 2+2-inground lift; 6,0 t 3x16A/t (3,0 kW)

Mechanical section
2.0730 Electrical connection, van 6-inground lift; 6,0-6,5 t 3x16A/t (4,5-12,0 kW)
3.8110
Storage area Storage area
Built-up area
2.0731 Electrical connection, van 4-inground lift; 5,0-6,5 t 3x25A/t (4,0 kW-6,0 kW) see manufacturer
2.0800 PC modem dual connection RJ45 for WIS/EPC/RETAS/PERS wiring CAT 7
3.8112 (parts/equipment) (parts/equipment)
Theoretical vehicle dimensions as per criteria catalog

2.0801 WLAN receiver wiring CAT 7


21 m² 22 m²
795,00 m²
Position after illuminate IT-area, under the roof
2.0716
citan kompakt

2.1460 Water connection ball valve 3/4"

optional
2.5100 Single light with mirror reflector 2x35 W or 2x49 W; 500 Lux (1 m above finish floor)
optional with grid
2.5680 Light strip with mirror reflector 2x49 W or 2x58 W; 500 Lux (1 m above finish floor)
7.35

optional with grid

C Öl

3.1370
C clear working height 5,50 m The power supply system design for the socket combinations and sockets is to be planned
with a voltage drop lower than 1.5% from the distributor to the terminal or a total voltage drop of lower than
4% of the counter to the terminal.
OPTION Connected point from the user's equipment by building manufacturers / installation company
3.1470
3.6730 Additional TGA equipment (e.g. heater, ventilation, etc.) refer to specifications and standards
3.1471
3.1472 3.1950
3. Equipment by users
3.1371 DL DL DL DL 2.0364 DL Cons. Designation Dimensions, comment
number
L=7.85 W=3.00, H=5.50

3.1300 Van 2-inground lifting platform with support arms Lifting capacity 5.0 t
Clear installation area

Workshop storage area (devices/facilities) 3.1302


3.1305
Lift control system
Van 2-inground lifting platform with support arms Lifting capacity 6.5 t
3.1317
as a function of productive workstation 3.1307 Lift control system
L=7.85 W=3.00, H=5.50

L=7.85 W=3.00, H=5.50

L=7.85 W=3.00, H=5.50

L=7.85 W=3.00, H=5.50


3.1315 Van 2-inground lifting platform Lifting capacity 6.5 t
Clear installation area

Clear installation area

Clear installation area

Clear installation area


3.1315 3.1305 3.1330 3.1350 with ramps, above floor lenght ramps min. 4,80 max. 5,50 m
3.1317 axle jack compressed air
van-place repair van 3.1319
3.1330
Lift control system
Van 2-inground lifting platform Lifting capacity 5.0 t
Option
1.50

with ramps and support arms, above floor lenght ramps min. 4,80 max. 5,50 m
1.1320
1.1450
m² 3.1332
3.1350
Lift control system
Van 6-inground lifting platform Lifting capacity 6.0 - 6.5 t
with ramps and support arms, above floor lenght ramps min. 4,80 max. 5,50 m
2 x rail 3 x 1750 mm
1- 6 60 3.1352
3.1370
Lift control system
Van 4-inground-lift for wheel alignment with ramps Lifting capacity 5.0 t or 6.5 t

Van repair area 7 - 12 80


2.5680 above floor lenght ramps min. 4,80 max. 5,50 m
25 25 25
66
*2.00

3.1371 axle jack compressed air


13 - 18 100 3.1373 Lift control system

Option 2.0610 Total storage area 100 m² 19 - 25 120 3.1400 Van 2-post lifting platform Lifting capacity 5.0 t
binder bottom edge min. 5,30 m
3.6075 3.6133 3.6080 UK +2,10
3.6072 2.0800 26 - 30 140 3.1401 Power supply unit left and right 2x1-phase socket 230V/16A
left push button safety valve for 1/2" air pressure
5.25 in the left and right column
UK +2,10 Fab. Prevost, Fab. Stäbli or of the same value
3.7200
2 m² 3.7280 3.2109 OPTION unembodied
connect by manufacturer;

3.1470 Van 4-post lifting for chasis alignment Lifting capacity 5,0 t or 6.5 t;
3.9516 3.9516 3.7200 3.7146 2.0295
2.0707 with ramps lenght ramps min. 4,80 max. 5,50 m
3.7190 3.1471 axle jack compressed air
3.1472 Power supply unit 2x1-phase socket 230V/16A

B
IT
Öl

B IT
25.50

push button safety valve for 1/2" air pressure


DL W DL DL W DL
2.80

Fab. Prevost, Fab. Stäbli or of the same value

partial supply
partial supply

3.8005 IT 3.7290 82 by manufacturer


shelve for
shelve for

IT A A IT A 3.1950 Power connection unit 3x1-phase socket 230V/16A


1.00 3.9517 B B
push button safety valve for 1/2" air pressure
Öl

Öl

Öl

Öl
2.0708 2.1460 1.50 Fab. Prevost, Fab. Stäbli or of the same value
Öl by manufacturer; instal by building manufacturers
3.2022 2.0610 2.0709 3.9517 3.7290 3.8005 3.2091 3.2022 PC-standalone workstation, standing l=1434, w=725, h=2200
UK +2,10 2.0801
3.6730
Detail 2
3.2051 ° Cabinet with sliding door L=1000, D=580, H=1050 mm
2.0800 2.0518
3.2101 3.2120 3.2062 3.2051
3.6711
6 m² 6 m² 3.2062 ° Cabinet with drawers L=717 D=725 H=1150
3.2091 Tool trolley for passenger cars/van/truck mobile
UK +2,10 3.6705 3.2101 Workbench W=1500 D=800 H=850
2.0517 3.2109 Workbench W=1250 D=750 H=840
3.2120 Vise Jaw width 125 mm
OPTION
*2.00

25 25 25 3.6072 headlight adjusting rail-bound


3.6075 Rail for headlight adjusting floor level, traversable, with L-profil

B 2.5680
B 3.6080
3.6133
Diagnosis implement truck
PC/van wheel alignment mobil
l=775, w=691, h=1185
see manufacturer
3.6705 Oiler
2.0715
3.6711 Compressed air removal valve safety valve for 1/2" air pressure management
L=7.85 W=3.00, H=5.50

L=7.85 W=3.00, H=5.50

L=7.85 W=3.00, H=5.50

L=7.85 W=3.00, H=5.50

L=7.85 W=3.00, H=5.50


3.1302
Clear installation area

Clear installation area

Clear installation area

Clear installation area

Clear installation area


inclusive ball valve, 8 bar
upper edge 3.6730 Compressed air connection ball valve, 8 bar
empty tube +0,05 3.7146 Hose drum board for van and CV motor oil, gear oil, antifreeze, used oil,
antifreeze suction, water and compressed air
OPTION
3.7190 Oil data recording system Coordinate interfaces
3.1950 3.7200 Engine oil extraction device
1.6023 3.7280 Antifreeze suction apparatur
2.0364 3.7290 Oleocont (waste bin for matter containing oil) Oleocont GmbH/Osnabrück
DL 3.6730 DL
L=7.35 W=2.00 H=max. vehicle height 3.35 (Sprinter with cool box)

3.8005 Rubbish container 240 ltr.; W = 580, D = 735, H = 1070 mm

Maneuvering space 3.8100


3.8102
Exhaust slotted conduit system
Hose carrier with
load 50 kg/per meter
tube length 7,50 m
exhaust hose and exhaust grommet with balancer
3.8110 Exhaust ventilator with exhaust pipe see manufacturer; surface load 183 kg

12.00
1.30

3.8112 Muffler housing see manufacturer; Insulation thickness 40 mm


Theoretical vehicle dimensions as per criteria catalog

Entrance and exit 3.8113


3.9516
Exhaust ventilator controller see manufacturer
DL DL Open shelve (basis shelve) L=1478, D=706; H=2200
3.9517 Open shelve (cultivation shelve) L=1428, D=706; H=2200

2.0723 2.0723 1 2 3 4 5 6 7 ° Furnishing suggestion must be coordinated with user

Öl
3.1401 3.1401
7.35

2.0363 2.0363
A DRE workshop planning/equipment
A

equipment/subsidiary operations
3.1300 3.1300 3.1300
2.0716
3.1400 3.1400 Storage area Storage area Implementation of functional workshop concepts
with support arms; Lifting capacity 5.0 t

with support arms; Lifting capacity 5.0 t

with support arms; Lifting capacity 5.0 t

(parts/equipment) (parts/equipment)
3.8110
Van 2-inground lifting platform

Van 2-inground lifting platform

Van 2-inground lifting platform

21 m² 22 m²

Storage areas for


3.8112
Our services:
Van 2-post lifting platform

Van 2-post lifting platform


light-band lower edge + 4,50

light-band lower edge + 4,50

light-band lower edge + 4,50

light-band lower edge + 4,50

light-band lower edge + 4,50

light-band lower edge + 4,50


6.20
6.20

- workshop draft planning


Yard area for
Lifting capacity 5.0 t

Lifting capacity 5.0 t


workshop equipment,
bays, etc.
extraction technology,

25.50
B oil supply and disposal,
compressed air system
1.6023 1.6023 - Advice and consulting for workshop planning/equipment
lower edge + 5,60

lower edge + 5,60

lower edge + 5,60

lower edge + 5,60

lower edge + 5,60

lower edge + 5,60

2.5100 - Standard plans for workshop planning/equipment


*2.00

equipment/subsidiary operations
emergency

- Project support of workshop equipment for new buildings and conversions


light strip

light strip

light strip

light strip

light strip

light strip

3.1302 2.0715 3.8100 3 x 3.8102 3.8113 3.50 7.50 1.00 - Functional creation of paintshop and bodywork centers (LAKAZE)
exit

2.0715
80

C
+0.00 2.0702 upper edge 3.1302
empty tube +0,05 DL

Storage areas for


20

-0.03 Door width 1.3500 Door width Door width Door width Door width
min. clearance 4.00 m min. clearance 4.00 m min. clearance 4.00 m min. clearance 4.00 m min. clearance 4.00 m
1.3602 Door height 1.3600 Door height Door height Door height Door height This plan contains confidential information which may be used solely in combination with the planning and equipping of Mercedes operations and with the
clearance 4.00 m 1.3650 clearance 4.00 m clearance 4.00 m clearance 4.00 m clearance 4.00 m express permission of the DRE department at Daimler AG only. Any passing-on of this plan to third parties, be it complete or

C in extracts is forbidden.

A
This plan is a binding orientation aid for the contractor for drafting the workshop equipment planning only. In the event of any
contradictions or other irregularities, the contractor must notify the DRE department immediately and before execution of the planning in
12.00 43 5.10 5.10 5.10 5.10 5.10 5.10 writing. Daimler AG does not accept any responsibility for the workshop planning and/or execution of construction work, even where this has been expressly
approved.
The specifications and standards contained in the plan may alter subsequently. Color deviations are print-specific. This plan is used internationally.
Statements on statutory, legal and tax regulations and consequences are only valid for the Federal Republic of Germany at such time as when
the plans are compiled. Therefore, become informed about the regulations and consequences applicable in other countries before realization of the
specifications and standards by means of your local architects, technical planners or appraisers. CI specifications of D-AG (BC/FP) must be observed.
Antifreeze suction apparatur

Hose drum board Entrance and exit

12.00
Standardplan
construction/installation/equipment
Maneuvering space
Van repair area with box
Compressed air

Mercedes-Benz (5,10 m axles)


Antifreeze 2
Antifreeze 1
Motor oil 2
Motor oil 1
Gear oil 3
Gear oil 2
Gear oil 1

Planning: Daimler AG Visitor address:


Water

Daimler Real Estate (DRE) Building 22

Ground floor layout scale 1:50 Overview plan scale 1:200


HPC: 0120
D-70546 Stuttgart, Germany
Telephone: +49-(0)711-17-90673
Epplestraße 225
Stuttgart - Möhringen

Mobil: +49-(0)160-8670489

DLWDL Planning content: Planning number:

Ground floor and generalplan E-T01


Index: h

Detail 2 Waste oil Waste oil


Öl

drawn: checked: approved:


Planning status:
extraction extraction Rehr R. Meyer G. Hausmann

scale 1:25 down down date:


December ´15
planning format:
118,9 / 84,1
scale:
1:50/1:200
This drawing is subject to the regulations pertaining to copyright protection

You might also like