Professional Documents
Culture Documents
Drop
Engineering Drawing (Instruments)
(Ans:d)
The mini drafter serves the purpose of
everything except The designation of sheet of size 594 x
841 is
a. Scales
b. Set square a. A0
c. Protractor b. A1
d. Compass c. A2
d. A3
(Ans:d)
(Ans:b)
During operation, the two arms of the
drafter remain at Which of the following is softest pencil?
a. 45° a. 2B
b. 90° b. 1B
c. 180° c. HB
d. 270° d. H
(Ans:b) (Ans:a)
With the combination of T-square, the Which of the following is the lightest
following angles can be drawn except pencil?
a. 15° a. 2B
b. 25° b. 1B
c. 45° c. HB
d. 105° d. H
(An:b) (Ans:d)
Which of the following compass is used Which of the following is not used to fix
to draw very large circles? drawing sheet on the board?
(Ans:a) (Ans:d)
Which of the following compass is used The main ingredients of pencil leads are
to draw small size circles?
a. Graphite and Clay
a. Beam b. Lead and Graphite
b. Large c. Clay and Lead
c. Bow d. None of these
(Ans:a)
42. When you want to make the letters of a 47. In a VR system, all of the following
line of text narrower, you would set its: statements about immersiveness are true,
A) aspect except:
B) scale A) response time is an important factor
C) alignment B) both display resolution and display size
D) font can affect it
ANS: A C) the visual sense is the only sense to
affect it
43. When you want to make sure that all of D) tracking body movement is an important
the text stays to the right of a given point on factor
the drawing, you wound set its: ANS: C
A) aspect
B) scale 48. Imagine a "L" shaped face extruded into
C) alignment three dimensions. How many faces does it
D) font contain?
ANS: C A) seven
B) eight
44. Which of the following is typically C) ten
represented in a drawing but does not have D) six
a true physical counterpart on the object? ANS: B
A) edge of planar surface
B) edge of a circular face 49. Which type of variable is the following
C) corner of a rectangle list: Texas, Utah, California, Delaware?
D) limiting element of a curved surface A) Nominal
ANS: D B) Ordinal
C) Scalar
45.A cutting plane normal to a face of a D) Vector
cube has to be ___________ in order to cut ANS: A
an oblique face.
A) rotated about one axis
B) rotated about one axis and translated
C) rotated about two axes
D) rotated about two axes and translated
ANS: C
Ans: (a)
Ans: (c)