You are on page 1of 16

Stress Analysis Report

Analyzed File: piston.ipt


Autodesk Inventor Version: 2017.3 (Build 213256000, 256)
Creation Date: 5/23/2017, 9:42 AM
Study Author: Hilmy

Project Info (iProperties)

Summary
Title
Author Hilmy
Company

Project
Part Number piston
Designer Hilmy
Cost $0.00
Date Created 5/23/2017

Status
Design Status WorkInProgress
Engr Approved by

Physical
Material Iron, Cast
Density 7.15 g/cm^3
Mass 0.275038 kg
Area 10239.2 mm^2
Volume 38466.9 mm^3
x=-1.89862 mm
Center of Gravity y=43.5002 mm
z=-0.0000179059 mm
Note: Physical values could be different from Physical values used by FEA reported below.

Static Analysis:1
General objective and settings:
Design Objective Single Point
Study Type Static Analysis
Last Modification Date 5/23/2017, 9:38 AM
Detect and Eliminate Rigid Body Modes Yes

Mesh settings:
Avg. Element Size (fraction of model diameter) 0.1
Min. Element Size (fraction of avg. size) 0.2
Grading Factor 1.5
Max. Turn Angle 60 deg
Create Curved Mesh Elements Yes

Material(s)
Name Iron, Cast
Mass Density 7.15 g/cm^3
General Yield Strength 758 MPa
Ultimate Tensile Strength 884 MPa
Young's Modulus 120.5 GPa
Stress Poisson's Ratio 0.3 ul
Shear Modulus 46.3462 GPa
Part Name(s) piston

Operating conditions
Pressure:1
Load Type Pressure
Magnitude 1200.000 MPa

Selected Face(s)

Pin Constraint:1
Constraint Type Pin Constraint
Fix Radial Direction Yes
Fix Axial Direction Yes
Fix Tangential Direction No

Selected Face(s)

Fixed Constraint:1
Constraint Type Fixed Constraint

Selected Face(s)

Results
Reaction Force and Moment on Constraints
Reaction Force Reaction Moment
Constraint Name
Magnitude Component (X,Y,Z) Magnitude Component (X,Y,Z)
Pin Constraint:1 30751.3 N 30601.6 N 27.9615 N m -14.5454 N m
-2950.01 N 0Nm
694.041 N 23.8805 N m
-30644.5 N 14.6637 N m
Fixed Constraint:1 30793.6 N 2947.35 N 17.8822 N m 0 N m
-689.051 N -10.2346 N m

Result Summary
Name Minimum Maximum
Volume 38466.5 mm^3
Mass 0.275036 kg
Von Mises Stress 0.379152 MPa 19983.6 MPa
1st Principal Stress -2852.71 MPa 13519.9 MPa
3rd Principal Stress -10722.2 MPa 1941.89 MPa
Displacement 0 mm 0.352806 mm
Safety Factor 0.0379311 ul 15 ul
Stress XX -6716.25 MPa 4478.15 MPa
Stress XY -4370.73 MPa 11091.5 MPa
Stress XZ -1024.46 MPa 1008.64 MPa
Stress YY -9293.01 MPa 8857.15 MPa
Stress YZ -4311.65 MPa 2439.23 MPa
Stress ZZ -3478.06 MPa 3934.53 MPa
X Displacement -0.126854 mm 0.0481626 mm
Y Displacement -0.329178 mm 0.328314 mm
Z Displacement -0.0500779 mm 0.0500258 mm
Equivalent Strain 0.00000327962 ul 0.143963 ul
1st Principal Strain 0.000000957678 ul 0.13276 ul
3rd Principal Strain -0.116026 ul -0.00000245817 ul
Strain XX -0.0399028 ul 0.0289646 ul
Strain XY -0.0471531 ul 0.11966 ul
Strain XZ -0.0110523 ul 0.0108816 ul
Strain YY -0.0662941 ul 0.0693282 ul
Strain YZ -0.0465158 ul 0.0263153 ul
Strain ZZ -0.0110234 ul 0.0173227 ul
Figures

Von Mises Stress

1st Principal Stress


3rd Principal Stress

Displacement
Safety Factor

Stress XX
Stress XY

Stress XZ
Stress YY

Stress YZ
Stress ZZ

X Displacement
Y Displacement

Z Displacement
Equivalent Strain

1st Principal Strain


3rd Principal Strain

Strain XX
Strain XY

Strain XZ
Strain YY

Strain YZ
Strain ZZ

C:\Users\dewi\Documents\Inventor\truss bridge\benda 7\piston.ipt

You might also like