Professional Documents
Culture Documents
Product Information
Lambda Probe Interface IC - CJ125
Customer benefits:
Excellent system know-how
Smart concepts for system safety
Secured supply
Long- term availability of manufacturing processes
and products
QS9000 and ISO/TS16949 certified
Features
Currents and Voltages (box 1)
Pump current control (boxes 2a to 2b)
Integrated circuit for continuous lambda regulation Pump current sense amplifier (boxes 3a to 3b)
with Ri measurement Lambda output amplifier (box 4)
Virtual ground voltage source for sensor and pump
current control (box 5)
Nernst cell reference voltage source (box 6)
Oscillator (box 7)
The integrated circuit CJ125 is a control and amplifier Circuit for Ri or Rical measurement
circuit for a wide range λ-Sensor LSU4.x for the (boxes 8a to 8d)
Diagnostic of sensor lines (box 9)
continuous regulation of λ in combination with the
Diagnostic of external heater (box 10)
sensor in the range of λ = 0.65... • (air).
Serial-Peripheral-Interface (SPI; box 11)
Programmable reference pumping currents
(box 12)
Suppression of Ri-measurement (box 13)
1
Block-/ functional diagram
2
PIN configuration
SOIC24
3
Pin description
Maximum Ratings
4
Electrical Characteristics
5
SPI - Block schematic, register, RD / WR-commands with hec- code
ENSCUN
c) Open load is not recognizable; bits used for low
battery
d) After RD_DIAG or if no failure is present; Failure bits
v: command valid/not valid; dc: don’t care („-“)
will be restored if failure is still present
x: 0 or 1; Z: tristate
SPI - Timing
SPI – Read Access
6
Chipset
x Valves
Battery
CY320 CJ945
µC x Relays
Sensor 18 Low Side
System Supply
e.g. Power Drivers
µC Supply x
Infineon Inductivities
Sensor Sensor Supply
TC1796 6x 2A/70V
Watchdog x
Reset 6x 2A/45V Resistors
Sensor CAN Driver 2x 3A/45V
ISO Interface A/D 4x 1A/45V x
_
+
Lamps
CAN RAM Fela
Sleep/Wake
ISO CAN
Peripherals x
8x 8 FLASH CK240
CY100 Ignition Drivers
e.g. _
2 8x 10 Bit A/D 5V
+
Contact
© 04/2006 All rights reserved by Robert Bosch GmbH including the right to file industrial property rights
Robert Bosch GmbH retains the sole powers of distribution, such as reproduction, copying and distribution.
For any use of products outside the released application, specified environments or installation conditions no warranty shall apply
and Bosch shall not be liable for such products or any damage caused by such products.