You are on page 1of 9

Specification for

Steel Sliding Door Type KSE


Single-skinned
Size
Width: from approx. 2500 mm to max. 8000 mm
Height: from approx. 2500 mm to max. 5500 mm
For size tables see Technical Manual.

Direction of opening
- Single-leaf, opening to left
- Single-leaf, opening to right
- Double-leaf, opening to left and right
- Multi-leaf versions on request

Type of fitting
- External (external wall)
- Internal (internal or external wall)

Door leaf
Frame profile of rectangular hollow section steel, 70 x 55 mm, to all four sides, with integral profiled rebate.
Overall thickness 55 mm.
Leaves divided in the height into individual areas by horizontal hollow section crossrails.

Choice of infill
- Ribbed sheet steel infill, with or without ventilation slot
- Raised panel sheet steel infill 1.75 mm
- Smooth sheet steel infill 1.75 mm
- Smooth sheet steel infill, double-skinned, with mineral wool, with or without ventilation slot
- Prepared for site infill (max. 16 kg/sqm)

Windows
Factory-fitted
Up to 1500 mm in the height, depending on the door height several windows above one another are
possible:
- Aluminium glazing bar with putty rebate for single panes up to 8 mm
- Rubber clamping profile for single panels up to 6 mm
- Aluminium frame (can be painted) for double panes up to 20 mm

Types of panes, factory-fitted


- Acrylic single pane (PMMA), clear, 4 mm
- Acrylic single pane (PMMA), clear, 5 mm
- Acrylic single pane (PMMA), crystal structure, 6 mm
- Acrylic double pane (PMMA), clear, 18 mm
- Acrylic double moulded unit (PMMA), 16 mm
- Polycarbonate pane (PC), clear, 6 mm

Windows
Site-fitted
Up to 1500 mm in the height, for site-fitted panes up to 20 mm. Window frame for
20 mm insulating glazing: aluminium window frame (can be painted).

Wall attachment
- Rectangular hollow section on closing side
- Profile on opening side
- U-shaped profile on the lintel
Fittings
The door features a top tubular track with twin rollers on ball bearings as well as guides on the bottom with
engaging guide on the door leaf. On the side opposite the wall the door leaf incorporates an aluminium half
lever handle and a bottom surface-mounted plastic handle and a bottom floor bolt to hold the door in place.
On the wall side, the door is fitted with an aluminium flat-style lever handle and a recessed plastic handle.
On the closing side, a hooked mortice lock with lever/knob function, 40 mm backset and prepared for a
profile cylinder. The profile cylinder can be fitted either at the factory or on site, flush on the outside. Cylinder
length: 35.5 + 35.5 (71) mm.

Surface protection
The door leaves and connecting profiles are made of galvanised steel, powder-coated with a primer in bright
white (based on RAL 9016).

Fitting
Attachment to the building structure by means of:
- plug and screw fixing
- welding
- threaded bars

Optional extras
- Wicket door
- Rain canopy (when door fitted externally)

Electric operator on request


Electro-mechanical operator STA 100 with chain rail and closing edge safety device on the door leaf front.
Key switch on the outside, push button on the inside.

Example
to be compiled and specified from the technical data as required.

Item Quantity Description Price each Total price

Steel sliding door 8000 x 4000 mm,


single-leaf version opening to the right.
Fitted externally. Design with twin
rollers in top tubular track as well as
floor guides with engaging guide on
the door leaf. Door leaf: single-skinned,
overall thickness 55 mm. Leaf divided
in the height into 4 sections by 3
horizontal crossrails. Infill: raised panel
sheet steel 1.75 m thick, galvanised and
powder-coated with a primer in bright
white (based on RAL 9016).
Make Hörmann type KSE

Application range:
Size (W x H): x mm
Direction of opening:
Type of fitting:
Divisions:
Door leaf infill:
Windows: No./size
Type of pane:
Optional extras:
Fitting:
Specification for
Steel Sliding Door Type KSM
Double-skinned with Mineral Wool Insulation

Size
Width: from approx. 2500 mm to max. 8000 mm
Height: from approx. 2500 mm to max. 5000 mm
For size tables see Technical Manual.

Direction of opening
- Single-leaf, opening to left
- Single-leaf, opening to right
- Double-leaf, opening to left and right
- Multi-leaf versions on request

Type of fitting
- External (external wall)
- Internal (internal or external wall)

Door leaf
Double-skinned, welded shell construction made from smooth 1.75 mm steel sheet on both sides, internally
reinforced and with mineral wool insulation. Overall thickness approx. 55 mm.

Glazing cut-out
Standard glazing (W x H): 473/523/573 x 773 mm.
Special sizes: Width: taking into consideration the minimum distance of 180 mm from the edge of the
window to the edge of the door leaf, max. height up to 1500 mm. Minimum distance of 108 mm from the
edge of the window to the edge of the door leaf. Window frame: Plastic or metal glazing frame (screwed
from the inside for security), with EPDM flexible seal on both sides.
Colour of frame: graphite black (based on RAL 9011).

Glazing shapes
- Square
- Rectangular
- Rhomboid
- Circular (port hole)

Types of panes, factory-fitted


- Acrylic single pane (PMMA), clear, 4 mm
- Acrylic single pane (PMMA), clear, 5 mm
- Acrylic single pane (PMMA), crystal structure, 6 mm
- Acrylic double pane (PMMA), clear, 18 mm
- Acrylic double moulded unit (PMMA), 16 mm
- Polycarbonate pane (PC), clear, 6 mm

Windows
Site-fitted
Glazing cut-outs in standard and special sizes as listed above, prepared for site glazing up to 20 mm pane
thickness.

Wall attachment
- U-shaped profile on the closing side and on the lintel
- Counter profile on the opening side
Fittings
The door features a top tubular track with double twin rollers on ball bearings as well as guides on the
bottom with engaging guide on the door leaf. On the side away from the wall the door leaf incorporates an
aluminium half lever handle and a surface-mounted plastic handle and a floor bolt to hold the door in place
at the bottom. On the wall side, the door is fitted with an aluminium flat-style lever handle and a recessed
plastic handle. On the closing side, a hooked mortice lock with lever/knob function, 65 mm backset and
prepared for a profile cylinder. The profile cylinder can be fitted either at the factory or on site, flush on the
outside.
Cylinder length: 35.5 + 35.5 (71) mm.

Surface protection
The door leaves and connecting profiles are made of galvanised steel, additionally primer powder-coated
(2K-PUR) in grey-white (based on RAL 9002).

Fitting
Attachment to the building structure by means of:
- plug and screw fixing
- welding
- threaded bars

Optional extras
- Wicket door
- Rain canopy (when door fitted externally)

Electric operator on request


Electro-mechanical operator STA 100 with chain rail and closing edge safety device on the door leaf front.
Key switch on the outside, push button on the inside.

Example
to be compiled and specified from the technical data as required.

Item Quantity Description Price each Total price

Steel sliding door 7000 x 2500 mm,


single-leaf version opening to
the left, fitted internally. Design with
double twin rollers in top tubular track
as well as bottom guides with engaging
guide on the door leaf.
Door leaf: double-skinned, overall
thickness approx. 55 mm. Welded shell
construction made from smooth 1.75 mm
steel sheet on both sides, galvanised
and powder-coated with primer (2K-PUR)
in grey-white (based on RAL 9002) with
internal reinforcement and mineral wool
insulation, 6 glazing cut-outs 573 x 773 mm
starting at a height of 1250 mm with acrylic
double pane 18 mm.
Make Hörmann type KSM

Application range:
Size (W x H): x mm
Direction of opening:
Type of fitting:
Insulation:
Glazing cut-outs: No./size
Type of pane:
Optional extras:
Fitting:

Specification for
Steel Sliding Door KSP
Double-skinned (PUR Rigid Foam Core)

Size
Width: from approx. 2500 mm to max. 8000 mm
Height: from approx. 2500 mm to max. 5000 mm
For size tables see Technical Manual.

Direction of opening
- Single-leaf, opening to left
- Single-leaf, opening to right
- Double-leaf, opening to left and right
- Multiple-leaf versions on request.

Type of fitting
- External (external wall)
- Internal (internal or external wall)

Door leaf
Double-skinned construction made from tear-resistant cover plates embossed on both sides, connected
through 100 % CFC-free PUR rigid foam. Overall thickness approx. 55 mm. as standard embossed cover
plates on request smooth cover plates, 1.0 mm thick

Glazing cut-out
Standard glazing (W x H): 473/523/573 x 773 mm.
Special sizes: Width: taking into consideration the minimum distance of 180 mm from the edge of the
window to the edge of the door leaf, max. height up to 1500 mm. Minimum distance between the glazing
208 mm. Window frame: plastic or metal glazing frame (screwed from the inside for security). With EPDM
flexible seal on both sides Colour of frame: graphite black (based on RAL 9011).

Glazing shapes
- Square
- Rectangular
- Triangular
- Rhomboid
- Circular (port hole)

Types of panes, factory-fitted


- Acrylic single pane (PMMA), clear, 4 mm
- Acrylic single pane (PMMA), clear, 5 mm
- Acrylic single pane (PMMA), crystal structure, 6 mm
- Acrylic double pane (PMMA), clear, 18 mm
- Acrylic double moulded unit (PMMA), clear 16 mm
- Polycarbonate pane (PC), clear, 6 mm
Panes, site-fitted
Glazing cut-outs in standard and special sizes as listed above, prepared for site glazing up to 20 mm pane
thickness.

Wall attachment
- U-shaped profile on the closing side and on the lintel
- Counter profile on the opening side

Fittings
The door features a top tubular track with double twin rollers on ball bearings as well as guides on the
bottom with engaging guide on the door leaf. On the side away from the wall the door leaf incorporates an
aluminium half lever handle and a surface-mounted plastic handle and a stock bolt lock at the bottom. On
the wall side an aluminium flat lever and a fitted recessed plastic handle.
On the closing side, a hooked mortice lock with lever/knob function, 65 mm backset and prepared for a
profile cylinder. The profile cylinder can be fitted either at the factory or on site, flush on the outside.
Cylinder length: 33.5 + 35.5 (71) mm

Surface protection
The door leaves and connecting profiles are made of galvanized steel, additionally powder-coated with a
primer (2-component PUR) in grey-white (based on RAL 9002).

Fitting
Attachment to the building structure by means of:
- plug and screw fixing
- welding
- threaded bars

Optional extras
- Wicket door
- Rain canopy (when door fitted externally)

Electric operator on request


Electromechanical operator STA 100 with chain rail and closing edge safety device on the door leaf front.
Key switch on the outside, push button on the inside.

Example
to be compiled and specified from the technical data as required.

Item Quantity Description Price each Total price

Steel sliding door 6000 x 4000 mm,


single-leaf version opening to the left,
fitted internally. Design with double twin
rollers in top tubular track as well as
bottom guides with engaging guide on
the door leaf. Door leaf: double-skinned,
overall thickness approx. 55 mm.
Welded shell construction made from
smooth 1.75 mm sheet steel on both
sides, galvanized and powder-coated
with a primer (2-component PUR) in
grey-white (based on RAL 9002) with
internal reinforcement and 100%
CFC-free PUR rigid foam core.
Make Hörmann type KSP

Application range:
Size (W x H): x mm
Direction of opening:
Type of fitting:
Divisions:
Door leaf infill:
Windows: No./size
Type of pane:
Optional extras:
Fitting:

Specification
Operator STA 100 for Sliding Doors
with Control Units A 25 S and A 210 S

Technical details
Operator STA 100

Voltage:
400 V 3-phase current, 50 Hz

Current input:
1.2 A

Power input:
0.32 kW

Temperature tolerance:
- 20 C to + 60° C

Duty cycle:
S 3, 40 % duty cycle

Motor speed:
2850 RPM

Operator speed:
45 RPM

Driving torque:
45 Nm

Door travel speed:


approx. 17 cm/s

Weight:
34 kg

Dimensions:
410 x 705 x 400 mm W x H x D

Technical details
Control unit A 25 S
Microprocessor control unit in separate plastic housing for on-site cabling. Cut-out at the travel limits via
switching magnet and magnetic limit switch. The door does not have a closing edge safety device.
Control voltage: 24 V
Protection category of control unit: IP 65
Protection category of plug: IP 44

Technical details
Control unit A 210 S
Microprocessor control unit in separate plastic housing, with integral automatic timer function. Cut-out at the
travel limits via switching magnet and magnetic limit switch. Power limit programmable in increments from 0
to 19. Self-monitoring closing edge safety device for the main closing edge on the door through optosensor
in the “CLOSE” direction. The coiled cable system is required in addition.
Decoding via microprocessor control unit. Additional speed monitoring via RPM sensor. With more than two
up to a maximum of six closing edge safety devices an additional PCB is required. A secondary or main
closing edge in the parking area for the “OPEN” direction is optional.
Control voltage: 24 V
Protection category of control unit: IP 65
Protection category of plug: IP 44

Example
to be compiled and specified from the technical data as required.

Item Quantity Description Price each Total price

Sliding Door Operator STA 100


Door operator with separate electronic
control unit in separate plastic housing
with main switch: operation via remote
control possible. Complete motor unit
consisting of 3-phase motor with integral
brake and maintenance-free worm gear,
door operator support bracket, control
unit with microprocessor incl.
emergency-OFF button and fastenings.
Function:
- Control unit A 25S:
Press-and-hold function for opening
and closing (without closing edge
safety device)
- Control unit A 210 S:
Operational directions separately
adjustable for impulse or press-and-hold
with a self-monitoring closing edge safety
device on the main closing edge for the
“CLOSE” direction. A secondary or main
closing edge in the parking area for the
“OPEN” direction is optional.
Make: Hörmann type STA 100 with A 25 S
or A 210 S

for door type:


Door size:
Width:
Height:
Issue : 06.00

You might also like