You are on page 1of 3

HDW-Hagenuk

Schiffstechnik

Installation / Test report for AIS Nauticast X-Pack DS


1. Vessel Registration Data
Vessel Name IMO Number
Flag State MMSI Number
Owner / Company Radio Call Sign
On – Board Telephone
Contact Number(s)
Superintendents Telephone
Name Number(s)
Vessel Type Gross Register
Tonnage
L.O.A Beam
X-Pack DS Serial X-Pack DS Softw.
No. Version
Comments:

2. Installation Locations
Power Supply 24V
29V input from radio console to VHF
Conning power supply
Attention: Fuse for VHF Conning in radio
console has to be changed to 16A

Optional Power Supply installed

X-Pack DS Location

GNSS Antenna Location

VHF Antenna Location

Pilot Plug Location

Ship´s Alarm Panel Location

Comments:

Testreport AIS X-Pack DS / tt.03.jj Page 1


HDW-Hagenuk
Schiffstechnik

3. Heading Sensor
Source Gyro Radar / Gyro via ECDIS
Manufacturer
Modell
Type GyroCompass
FluxgateCompass
GPSCompass
Output NMEA
Message Required: HDT ROT Required: HDT ROT
IEC 61162-1:2000 Optional : OSD (from Radar)
If no IEC61162 Synchro
Reference Voltage=
Phase Voltage=
Frequency=
Stepper
Pos. Step Neg. Step
Step V.:
Ratio: 90:1 180:1 360:1
Location for
Converter
Cable length to
Transponder
Comments:

4. Speed Sensor
Source Doppler Log / GNSS Radar / ECDIS
Manufacturer
Modell
Output NMEA
Message Required: VBW Required: VBW
IEC 61162-1:2000 Optional : VTG Optional : VTG OSD
Location for
Converter
Cable length to
Transponder
Comments:

Testreport AIS X-Pack DS / tt.03.jj Page 2


HDW-Hagenuk
Schiffstechnik

5. Position Sensor
Source GNSS ECDIS / Nav data Distribution
Box
Manufacturer
Modell
Type GPS GLONASS
Differential
Output NMEA
Message Required: DTM GLL RTE Required: DTM GLL RTE WPL
IEC 61162-1:2000 WPL Optional :
Optional : GGA
Cable length to
Transponder
Antenna Location External Position Source X-Pack DS Internal Position
ECDIS-Conning □ / GNSS □
A=Distance to Bow
B=Distance to
Stern
C=Distance to port
Side
D=Distgance to
Starboard
Comments:

6. Presentation Interface
Source Radar ECDIS
Manufacturer
Modell
Type
Input NMEA
Message
IEC 61162-2
Location for
Converter
Cable length to
Transponder
Comments:

Testreport AIS X-Pack DS / tt.03.jj Page 3

You might also like