You are on page 1of 7

WARNING

This tool is only designed for training purposes onl

Changes can only be made to Green fields

WARNING
Ericsson Employees should be using the offical tools found on the link below:

http://internal.ericsson.com/page/hub_net/products/plm/plm_wran/guidelines/transportn
purposes only

Green fields

d on the link below:

n/guidelines/transportnetwork.jsp
Elastic Dimensioning Tool

Traffic parameters R99 HS


Number of Subs (N_subs)
Target average user rate [kbps]
User traffic requirement [KB/h]
Dimensioning Factors
Soft Handover (F_SHO)
IP Transport Nwk Overhead (IP_TN_OH)
Channel Efficiency Factor (F_EFF)
Ethernet data rates
TargetAvgxx [kbps] #DIV/0! #DIV/0!
Max TargetAvg [kbps] #DIV/0!
AvgLoad [kbps] #DIV/0! #DIV/0!
Total AvgLoad [kbps] #DIV/0!

Elastic Requirement #DIV/0! kbps


Limited Internal
E 4 (7)

Elastic dim & KR rem


QoS RABs Speech CS64 SRB R99 PS & HS
Number of Subs (N_subs) 0
Traffic per sub [mE] 0
Soft Handover Factor (F_SHO)
K-R Dimensioning Tool
Rates of services [kbps] 0 0 0 #DIV/0!
Load [Erlang] 0.00 0.00 0.00
Target Blocking Probability 0.00% 0.00% 0.00% 0.00%
Resulting blocking probaility 0.000% 0.000% 0.000% 9.995%

GBR + Elastic Requirement 2415.90 kbps


Dimensioning

Date: 2005-11-09 No: ETH/RT-2004:0045


Sheet: Elastic dim & KR rem Rev: D
Limited Internal
E 5 (7)

From Elastic Dimensioning


Speech + CS64 Traffic

Elastic Requirement
N_Subs X mE X F_SHO

Date: 2005-11-09 No: ETH/RT-2004:0045


Sheet: Elastic dim & KR rem Rev: D
End RBS Iub Dimensioning Tool
Traffic Requirements [kbps]
GBR_peak

Elastic dim & KR rem #NAME?


MBMS
Traffic Model #NAME?

Max A #NAME?

CCH & Node Sync


O&M
NBAP

Single user HSDPA peak [Mbps]


SingleUserRateHS 0.00

Iub Cap [kbps] #NAME?


BS Iub Dimensioning Tool

Based on Mpole and service rate including IP TN overhead

From Elastic dim & KR rem sheet


Ncells X 74, 140.4 or 280.8 kbps
Elastic dim & KR rem + MBMS

max(GPR_peak, Elastic dim & KR rem + MBMS)

0 for more than 1 Priority

Single user HSDPA peak including IP TN overhead

max[(Max A+CCH&Node Sync+O&M+NBAP), SingleUserRateHS]

You might also like