You are on page 1of 16

1

Case Name: Tugas 2.hsc


2 LEGENDS
3 Bedford, MA Unit Set: SI
4 USA
Date/Time: Thu Apr 19 21:30:15 2018
5
6
7 Pipe Segment: Subsea Piping
8
9
10
CONNECTIONS
11
12
Inlet Stream
13 STREAM NAME FROM UNIT OPERATION
14 To Subsea Pipeline Compressor K-100
15
16
Outlet Stream
17 STREAM NAME TO UNIT OPERATION
18 To Upstream
19
20
Energy Stream
21 STREAM NAME TO UNIT OPERATION
22 energy loss
23
24
PARAMETERS
25
26
Pressure Gradient/Pipe Parameters
27 Horizontal Pipe Flow Correlation: Beggs and Brill (1979)
28 Vertical Pipe Flow Correlation: Beggs and Brill (1979)
29 Inclined Pipe Flow Correlation: Beggs and Brill (1979)
30 Pressure Drop: 47.69 kPa
31
32
Fittings Parameters
33 Segment Number
34 Fitting Name
35 VH Factor
36 FT Factor
37 Data Source
38
39
Swage Parameters
40 Segment Number
41 Swage Name
42 Swage Angle (deg)
43 Inlet Diameter (mm)
44 Outlet Diameter (mm)
45 Swage Type
46
47
CALCULATION
48 Pressure Tolerance (kPa) 0.1000 Length Step Size (m) 1000
49 Temperature Tolerance (C) 1.000e-002 Flow Initial Guess (kgmole/h) 360.0
50 Heat Flow Tolerance (kJ/h) 0.3600 Flow Step Size (kgmole/h) 252.0
51 Length Initial Guess (m) 5000 Diam. Initial Guess (mm) 80.00
52 Always Use PH Flash Disabled Default Increments 5*
53 Do Deposition Calcs Enabled Check Choke Flow Disabled
54 Is Pipe Choked No
55
56
Emulsions
57 Emlsion Viscosity Method: HYSYS
58 Constant K1: ---
59 Constant K2: ---
60 Constant K3: ---
61 Inversion Point: 0.5000
62
63
User Variables
64
65
SIZING
66 Segment Number 1 2 3 4
67 Fitting/Pipe Pipe Pipe Pipe Pipe
68 Distance (m) 500.0 * 500.0 * 500.0 * 500.0 *
69 Aspen Technology Inc. Aspen HYSYS Version 8.8 (34.0.0.8909) Page 1 of 16
Licensed to: LEGENDS * Specified by user.
1
Case Name: Tugas 2.hsc
2 LEGENDS
3 Bedford, MA Unit Set: SI
4 USA
Date/Time: Thu Apr 19 21:30:15 2018
5
6
7 Pipe Segment: Subsea Piping (continued)
8
9
10
SIZING
11 Elevation Change (m) -2.000 * 17.00 * 3.000 * 9.000 *
12 Schedule Schedule 40 Schedule 40 Schedule 40 Schedule 40
13 Nominal Diameter (mm) 304.8 304.8 304.8 304.8
14 Outer Diameter (mm) 323.8 323.8 323.8 323.8
15 Inner Diameter (mm) 303.2 303.2 303.2 303.2
16 Material Mild Steel Mild Steel Mild Steel Mild Steel
17 Roughness (m) 4.572e-005 4.572e-005 4.572e-005 4.572e-005
18 Conductivity (W/m-K) 45.00 45.00 45.00 45.00
19 Increments 5 5 5 5
20 Fitting No --- --- --- ---
21 Segment Number 5 6 7 8
22 Fitting/Pipe Pipe Pipe Pipe Pipe
23 Distance (m) 500.0 * 500.0 * 500.0 * 500.0 *
24 Elevation Change (m) 0.0000 4.000 * 1.000 * 0.0000
25 Schedule Schedule 40 Schedule 40 Schedule 40 Schedule 40
26 Nominal Diameter (mm) 304.8 304.8 304.8 304.8
27 Outer Diameter (mm) 323.8 323.8 323.8 323.8
28 Inner Diameter (mm) 303.2 303.2 303.2 303.2
29 Material Mild Steel Mild Steel Mild Steel Mild Steel
30 Roughness (m) 4.572e-005 4.572e-005 4.572e-005 4.572e-005
31 Conductivity (W/m-K) 45.00 45.00 45.00 45.00
32 Increments 5 5 5 5
33 Fitting No --- --- --- ---
34 Segment Number 9 10 11 12
35 Fitting/Pipe Pipe Pipe Pipe Pipe
36 Distance (m) 500.0 * 500.0 * 500.0 * 500.0 *
37 Elevation Change (m) 3.000 * 0.0000 6.000 * 20.00 *
38 Schedule Schedule 40 Schedule 40 Schedule 40 Schedule 40
39 Nominal Diameter (mm) 304.8 304.8 304.8 304.8
40 Outer Diameter (mm) 323.8 323.8 323.8 323.8
41 Inner Diameter (mm) 303.2 303.2 303.2 303.2
42 Material Mild Steel Mild Steel Mild Steel Mild Steel
43 Roughness (m) 4.572e-005 4.572e-005 4.572e-005 4.572e-005
44 Conductivity (W/m-K) 45.00 45.00 45.00 45.00
45 Increments 5 5 5 5
46 Fitting No --- --- --- ---
47 Segment Number 13
48 Fitting/Pipe Pipe
49 Distance (m) 500.0 *
50 Elevation Change (m) 27.00 *
51 Schedule Schedule 40
52 Nominal Diameter (mm) 304.8
53 Outer Diameter (mm) 323.8
54 Inner Diameter (mm) 303.2
55 Material Mild Steel
56 Roughness (m) 4.572e-005
57 Conductivity (W/m-K) 45.00
58 Increments 5
59 Fitting No ---
60
61
HEAT TRANSFER
62 Heat Loss: 0.0000 kJ/h * Ambient Temp: --- Overall HTC: ---
63
64
CONDITIONS
65 Name To Subsea Pipeline To Upstream energy loss
66 Vapour 1.0000 1.0000 ---
67 Temperature (C) 31.1943 30.5104 ---
68 Pressure (kPa) 4755.2878 * 4707.5963 ---
69 Aspen Technology Inc. Aspen HYSYS Version 8.8 (34.0.0.8909) Page 2 of 16
Licensed to: LEGENDS * Specified by user.
1
Case Name: Tugas 2.hsc
2 LEGENDS
3 Bedford, MA Unit Set: SI
4 USA
Date/Time: Thu Apr 19 21:30:15 2018
5
6
7 Pipe Segment: Subsea Piping (continued)
8
9
10
CONDITIONS
11 Molar Flow (kgmole/h) 436.4790 436.4790 ---
12 Mass Flow (kg/h) 10054.8590 10054.8590 ---
13 Std Ideal Liq Vol Flow (m3/h) 24.7052 24.7052 ---
14 Molar Enthalpy (kJ/kgmole) -1.330e+005 -1.330e+005 ---
15 Molar Entropy (kJ/kgmole-C) 154.2 154.2 ---
16 Heat Flow (kJ/h) -5.8046e+07 -5.8055e+07 0.0000e-01 *
17
18
PROPERTIES
19 Name To Subsea Pipeline To Upstream
20 Molecular Weight 23.04 23.04
21 Molar Density (kgmole/m3) 2.177 2.160
22 Mass Density (kg/m3) 50.15 49.75
23 Act. Volume Flow (m3/h) 200.5 202.1
24 Mass Enthalpy (kJ/kg) -5773 -5774
25 Mass Entropy (kJ/kg-C) 6.694 6.695
26 Heat Capacity (kJ/kgmole-C) 47.60 47.53
27 Mass Heat Capacity (kJ/kg-C) 2.066 2.063
28 LHV Molar Basis (Std) (kJ/kgmole) 7.547e+005 7.547e+005
29 HHV Molar Basis (Std) (kJ/kgmole) 8.284e+005 8.284e+005
30 HHV Mass Basis (Std) (kJ/kg) 3.596e+004 3.596e+004
31 CO2 Loading --- ---
32 CO2 Apparent Mole Conc. (kgmole/m3) --- ---
33 CO2 Apparent Wt. Conc. (kgmol/kg) --- ---
34 LHV Mass Basis (Std) (kJ/kg) 3.276e+004 3.276e+004
35 Phase Fraction [Vol. Basis] 1.000 1.000
36 Phase Fraction [Mass Basis] 1.000 1.000
37 Phase Fraction [Act. Vol. Basis] 1.000 1.000
38 Mass Exergy (kJ/kg) 398.4 397.5
39 Partial Pressure of CO2 (kPa) 820.3 812.1
40 Cost Based on Flow (Cost/s) 0.0000 0.0000
41 Act. Gas Flow (ACT_m3/h) 200.5 202.1
42 Avg. Liq. Density (kgmole/m3) 17.67 17.67
43 Specific Heat (kJ/kgmole-C) 47.60 47.53
44 Std. Gas Flow (STD_m3/h) 1.032e+004 1.032e+004
45 Std. Ideal Liq. Mass Density (kg/m3) 407.0 407.0
46 Act. Liq. Flow (m3/s) --- ---
47 Z Factor 0.8633 0.8634
48 Watson K 15.33 15.33
49 User Property --- ---
50 Partial Pressure of H2S (kPa) 0.0000 0.0000
51 Cp/(Cp - R) 1.212 1.212
52 Cp/Cv 1.485 1.484
53 Heat of Vap. (kJ/kgmole) 1.009e+004 1.014e+004
54 Kinematic Viscosity (cSt) 0.2669 0.2683
55 Liq. Mass Density (Std. Cond) (kg/m3) 0.9778 0.9778
56 Liq. Vol. Flow (Std. Cond) (m3/h) 1.028e+004 1.028e+004
57 Liquid Fraction 0.0000 0.0000
58 Molar Volume (m3/kgmole) 0.4594 0.4631
59 Mass Heat of Vap. (kJ/kg) 438.0 440.0
60 Phase Fraction [Molar Basis] 1.0000 1.0000
61 Surface Tension (dyne/cm) --- ---
62 Thermal Conductivity (W/m-K) 3.369e-002 3.356e-002
63 Viscosity (cP) 1.339e-002 1.335e-002
64 Cv (Semi-Ideal) (kJ/kgmole-C) 39.28 39.21
65 Mass Cv (Semi-Ideal) (kJ/kg-C) 1.705 1.702
66 Cv (kJ/kgmole-C) 32.06 32.02
67 Mass Cv (kJ/kg-C) 1.392 1.390
68 Cv (Ent. Method) (kJ/kgmole-C) --- ---
69 Aspen Technology Inc. Aspen HYSYS Version 8.8 (34.0.0.8909) Page 3 of 16
Licensed to: LEGENDS * Specified by user.
1
Case Name: Tugas 2.hsc
2 LEGENDS
3 Bedford, MA Unit Set: SI
4 USA
Date/Time: Thu Apr 19 21:30:15 2018
5
6
7 Pipe Segment: Subsea Piping (continued)
8
9
10
PROPERTIES
11 Name To Subsea Pipeline To Upstream
12 Mass Cv (Ent. Method) (kJ/kg-C) --- ---
13 Cp/Cv (Ent. Method) --- ---
14 Reid VP at 37.8 C (kPa) --- ---
15 True VP at 37.8 C (kPa) --- ---
16 Liq. Vol. Flow - Sum(Std. Cond) (m3/h) 1.028e+004 1.028e+004
17 Viscosity Index --- ---
18
19
PROFILES
20
21
Data
22 Distance Elevation Increments
23 (m) (m)
24 0.0000 0.0000 5
25 500.0 -2.000 5
26 1000 15.00 5
27 1500 18.00 5
28 2000 27.00 5
29 2500 27.00 5
30 3000 31.00 5
31 3500 32.00 5
32 4000 32.00 5
33 4500 35.00 5
34 5000 35.00 5
35 5500 41.00 5
36 6000 61.00 5
37 6500 88.00
38
39
Pipe Table
40 Length (m) 0.0000 100.0 200.0 300.0
41 Elevation (m) 0.0000 -0.4000 -0.8000 -1.200
42 Pressure (kPa) 4755 4755 4756 4756
43 Temperature (C) 31.19 31.20 31.20 31.20
44 Vapour Fraction 1.0000 1.0000 1.0000 1.0000
45 Heat Transferred (kJ/h-m) --- 0.0000 0.0000 0.0000
46 Flow Regime Vapour Only Vapour Only Vapour Only Vapour Only
47 Liquid HoldUp 0.0000 0.0000 0.0000 0.0000
48 Friction Gradient (kPa/m) 7.047e-004 7.047e-004 7.047e-004 7.047e-004
49 Static Gradient (kPa/m) -1.967e-003 -1.967e-003 -1.967e-003 -1.967e-003
50 Accel. Gradient (kPa/m) 0.0000 0.0000 0.0000 0.0000
51 Liq. Reynolds --- --- --- ---
52 Vap. Reynolds 8.761e+005 8.761e+005 8.761e+005 8.761e+005
53 Liquid Velocity (m/s) --- --- --- ---
54 Vapour Velocity (m/s) 0.7713 0.7712 0.7712 0.7712
55 Deposit Thickness (mm) --- --- --- ---
56 Deposit Volume (m3) --- --- --- ---
57 Length (m) 400.0 500.0 600.0 700.0
58 Elevation (m) -1.600 -2.000 1.400 4.800
59 Pressure (kPa) 4756 4756 4754 4752
60 Temperature (C) 31.20 31.21 31.18 31.16
61 Vapour Fraction 1.0000 1.0000 1.0000 1.0000
62 Heat Transferred (kJ/h-m) 0.0000 0.0000 0.0000 0.0000
63 Flow Regime Vapour Only Vapour Only Vapour Only Vapour Only
64 Liquid HoldUp 0.0000 0.0000 0.0000 0.0000
65 Friction Gradient (kPa/m) 7.047e-004 7.046e-004 7.048e-004 7.050e-004
66 Static Gradient (kPa/m) -1.967e-003 -1.967e-003 1.672e-002 1.671e-002
67 Accel. Gradient (kPa/m) 0.0000 0.0000 0.0000 0.0000
68 Liq. Reynolds --- --- --- ---
69 Aspen Technology Inc. Aspen HYSYS Version 8.8 (34.0.0.8909) Page 4 of 16
Licensed to: LEGENDS * Specified by user.
1
Case Name: Tugas 2.hsc
2 LEGENDS
3 Bedford, MA Unit Set: SI
4 USA
Date/Time: Thu Apr 19 21:30:15 2018
5
6
7 Pipe Segment: Subsea Piping (continued)
8
9
10
PROFILES
11
12
Pipe Table
13 Vap. Reynolds 8.761e+005 8.761e+005 8.762e+005 8.763e+005
14 Liquid Velocity (m/s) --- --- --- ---
15 Vapour Velocity (m/s) 0.7712 0.7712 0.7714 0.7716
16 Deposit Thickness (mm) --- --- --- ---
17 Deposit Volume (m3) --- --- --- ---
18 Length (m) 800.0 900.0 1000 1100
19 Elevation (m) 8.200 11.60 15.00 15.60
20 Pressure (kPa) 4751 4749 4747 4747
21 Temperature (C) 31.13 31.10 31.08 31.07
22 Vapour Fraction 1.0000 1.0000 1.0000 1.0000
23 Heat Transferred (kJ/h-m) 0.0000 0.0000 0.0000 0.0000
24 Flow Regime Vapour Only Vapour Only Vapour Only Vapour Only
25 Liquid HoldUp 0.0000 0.0000 0.0000 0.0000
26 Friction Gradient (kPa/m) 7.052e-004 7.054e-004 7.056e-004 7.057e-004
27 Static Gradient (kPa/m) 1.671e-002 1.670e-002 1.670e-002 2.947e-003
28 Accel. Gradient (kPa/m) 0.0000 0.0000 0.0000 0.0000
29 Liq. Reynolds --- --- --- ---
30 Vap. Reynolds 8.764e+005 8.765e+005 8.766e+005 8.766e+005
31 Liquid Velocity (m/s) --- --- --- ---
32 Vapour Velocity (m/s) 0.7718 0.7721 0.7723 0.7723
33 Deposit Thickness (mm) --- --- --- ---
34 Deposit Volume (m3) --- --- --- ---
35 Length (m) 1200 1300 1400 1500
36 Elevation (m) 16.20 16.80 17.40 18.00
37 Pressure (kPa) 4746 4746 4746 4745
38 Temperature (C) 31.07 31.06 31.06 31.05
39 Vapour Fraction 1.0000 1.0000 1.0000 1.0000
40 Heat Transferred (kJ/h-m) 0.0000 0.0000 0.0000 0.0000
41 Flow Regime Vapour Only Vapour Only Vapour Only Vapour Only
42 Liquid HoldUp 0.0000 0.0000 0.0000 0.0000
43 Friction Gradient (kPa/m) 7.057e-004 7.058e-004 7.058e-004 7.058e-004
44 Static Gradient (kPa/m) 2.946e-003 2.946e-003 2.946e-003 2.946e-003
45 Accel. Gradient (kPa/m) 0.0000 0.0000 0.0000 0.0000
46 Liq. Reynolds --- --- --- ---
47 Vap. Reynolds 8.766e+005 8.766e+005 8.766e+005 8.767e+005
48 Liquid Velocity (m/s) --- --- --- ---
49 Vapour Velocity (m/s) 0.7724 0.7724 0.7725 0.7725
50 Deposit Thickness (mm) --- --- --- ---
51 Deposit Volume (m3) --- --- --- ---
52 Length (m) 1600 1700 1800 1900
53 Elevation (m) 19.80 21.60 23.40 25.20
54 Pressure (kPa) 4744 4743 4743 4742
55 Temperature (C) 31.04 31.03 31.01 31.00
56 Vapour Fraction 1.0000 1.0000 1.0000 1.0000
57 Heat Transferred (kJ/h-m) 0.0000 0.0000 0.0000 0.0000
58 Flow Regime Vapour Only Vapour Only Vapour Only Vapour Only
59 Liquid HoldUp 0.0000 0.0000 0.0000 0.0000
60 Friction Gradient (kPa/m) 7.060e-004 7.061e-004 7.062e-004 7.063e-004
61 Static Gradient (kPa/m) 8.836e-003 8.835e-003 8.833e-003 8.832e-003
62 Accel. Gradient (kPa/m) 0.0000 0.0000 0.0000 0.0000
63 Liq. Reynolds --- --- --- ---
64 Vap. Reynolds 8.767e+005 8.768e+005 8.768e+005 8.769e+005
65 Liquid Velocity (m/s) --- --- --- ---
66 Vapour Velocity (m/s) 0.7727 0.7728 0.7729 0.7730
67 Deposit Thickness (mm) --- --- --- ---
68 Deposit Volume (m3) --- --- --- ---
69 Aspen Technology Inc. Aspen HYSYS Version 8.8 (34.0.0.8909) Page 5 of 16
Licensed to: LEGENDS * Specified by user.
1
Case Name: Tugas 2.hsc
2 LEGENDS
3 Bedford, MA Unit Set: SI
4 USA
Date/Time: Thu Apr 19 21:30:15 2018
5
6
7 Pipe Segment: Subsea Piping (continued)
8
9
10
PROFILES
11
12
Pipe Table
13 Length (m) 2000 2100 2200 2300
14 Elevation (m) 27.00 27.00 27.00 27.00
15 Pressure (kPa) 4741 4741 4740 4740
16 Temperature (C) 30.98 30.98 30.98 30.98
17 Vapour Fraction 1.0000 1.0000 1.0000 1.0000
18 Heat Transferred (kJ/h-m) 0.0000 0.0000 0.0000 0.0000
19 Flow Regime Vapour Only Vapour Only Vapour Only Vapour Only
20 Liquid HoldUp 0.0000 0.0000 0.0000 0.0000
21 Friction Gradient (kPa/m) 7.064e-004 7.064e-004 7.064e-004 7.064e-004
22 Static Gradient (kPa/m) 8.830e-003 0.0000 0.0000 0.0000
23 Accel. Gradient (kPa/m) 0.0000 0.0000 0.0000 0.0000
24 Liq. Reynolds --- --- --- ---
25 Vap. Reynolds 8.769e+005 8.769e+005 8.769e+005 8.769e+005
26 Liquid Velocity (m/s) --- --- --- ---
27 Vapour Velocity (m/s) 0.7731 0.7732 0.7732 0.7732
28 Deposit Thickness (mm) --- --- --- ---
29 Deposit Volume (m3) --- --- --- ---
30 Length (m) 2400 2500 2600 2700
31 Elevation (m) 27.00 27.00 27.80 28.60
32 Pressure (kPa) 4740 4740 4740 4739
33 Temperature (C) 30.98 30.98 30.98 30.97
34 Vapour Fraction 1.0000 1.0000 1.0000 1.0000
35 Heat Transferred (kJ/h-m) 0.0000 0.0000 0.0000 0.0000
36 Flow Regime Vapour Only Vapour Only Vapour Only Vapour Only
37 Liquid HoldUp 0.0000 0.0000 0.0000 0.0000
38 Friction Gradient (kPa/m) 7.064e-004 7.064e-004 7.065e-004 7.065e-004
39 Static Gradient (kPa/m) 0.0000 0.0000 3.924e-003 3.924e-003
40 Accel. Gradient (kPa/m) 0.0000 0.0000 0.0000 0.0000
41 Liq. Reynolds --- --- --- ---
42 Vap. Reynolds 8.769e+005 8.769e+005 8.769e+005 8.770e+005
43 Liquid Velocity (m/s) --- --- --- ---
44 Vapour Velocity (m/s) 0.7732 0.7732 0.7733 0.7733
45 Deposit Thickness (mm) --- --- --- ---
46 Deposit Volume (m3) --- --- --- ---
47 Length (m) 2800 2900 3000 3100
48 Elevation (m) 29.40 30.20 31.00 31.20
49 Pressure (kPa) 4739 4738 4738 4738
50 Temperature (C) 30.96 30.96 30.95 30.95
51 Vapour Fraction 1.0000 1.0000 1.0000 1.0000
52 Heat Transferred (kJ/h-m) 0.0000 0.0000 0.0000 0.0000
53 Flow Regime Vapour Only Vapour Only Vapour Only Vapour Only
54 Liquid HoldUp 0.0000 0.0000 0.0000 0.0000
55 Friction Gradient (kPa/m) 7.066e-004 7.067e-004 7.067e-004 7.067e-004
56 Static Gradient (kPa/m) 3.923e-003 3.923e-003 3.923e-003 9.807e-004
57 Accel. Gradient (kPa/m) 0.0000 0.0000 0.0000 0.0000
58 Liq. Reynolds --- --- --- ---
59 Vap. Reynolds 8.770e+005 8.770e+005 8.770e+005 8.771e+005
60 Liquid Velocity (m/s) --- --- --- ---
61 Vapour Velocity (m/s) 0.7734 0.7735 0.7735 0.7735
62 Deposit Thickness (mm) --- --- --- ---
63 Deposit Volume (m3) --- --- --- ---
64 Length (m) 3200 3300 3400 3500
65 Elevation (m) 31.40 31.60 31.80 32.00
66 Pressure (kPa) 4738 4737 4737 4737
67 Temperature (C) 30.95 30.94 30.94 30.94
68 Vapour Fraction 1.0000 1.0000 1.0000 1.0000
69 Aspen Technology Inc. Aspen HYSYS Version 8.8 (34.0.0.8909) Page 6 of 16
Licensed to: LEGENDS * Specified by user.
1
Case Name: Tugas 2.hsc
2 LEGENDS
3 Bedford, MA Unit Set: SI
4 USA
Date/Time: Thu Apr 19 21:30:15 2018
5
6
7 Pipe Segment: Subsea Piping (continued)
8
9
10
PROFILES
11
12
Pipe Table
13 Heat Transferred (kJ/h-m) 0.0000 0.0000 0.0000 0.0000
14 Flow Regime Vapour Only Vapour Only Vapour Only Vapour Only
15 Liquid HoldUp 0.0000 0.0000 0.0000 0.0000
16 Friction Gradient (kPa/m) 7.068e-004 7.068e-004 7.068e-004 7.068e-004
17 Static Gradient (kPa/m) 9.806e-004 9.806e-004 9.806e-004 9.805e-004
18 Accel. Gradient (kPa/m) 0.0000 0.0000 0.0000 0.0000
19 Liq. Reynolds --- --- --- ---
20 Vap. Reynolds 8.771e+005 8.771e+005 8.771e+005 8.771e+005
21 Liquid Velocity (m/s) --- --- --- ---
22 Vapour Velocity (m/s) 0.7736 0.7736 0.7736 0.7736
23 Deposit Thickness (mm) --- --- --- ---
24 Deposit Volume (m3) --- --- --- ---
25 Length (m) 3600 3700 3800 3900
26 Elevation (m) 32.00 32.00 32.00 32.00
27 Pressure (kPa) 4737 4737 4737 4737
28 Temperature (C) 30.94 30.94 30.94 30.94
29 Vapour Fraction 1.0000 1.0000 1.0000 1.0000
30 Heat Transferred (kJ/h-m) 0.0000 0.0000 0.0000 0.0000
31 Flow Regime Vapour Only Vapour Only Vapour Only Vapour Only
32 Liquid HoldUp 0.0000 0.0000 0.0000 0.0000
33 Friction Gradient (kPa/m) 7.068e-004 7.068e-004 7.069e-004 7.069e-004
34 Static Gradient (kPa/m) 0.0000 0.0000 0.0000 0.0000
35 Accel. Gradient (kPa/m) 0.0000 0.0000 0.0000 0.0000
36 Liq. Reynolds --- --- --- ---
37 Vap. Reynolds 8.771e+005 8.771e+005 8.771e+005 8.771e+005
38 Liquid Velocity (m/s) --- --- --- ---
39 Vapour Velocity (m/s) 0.7736 0.7737 0.7737 0.7737
40 Deposit Thickness (mm) --- --- --- ---
41 Deposit Volume (m3) --- --- --- ---
42 Length (m) 4000 4100 4200 4300
43 Elevation (m) 32.00 32.60 33.20 33.80
44 Pressure (kPa) 4737 4736 4736 4736
45 Temperature (C) 30.94 30.93 30.93 30.92
46 Vapour Fraction 1.0000 1.0000 1.0000 1.0000
47 Heat Transferred (kJ/h-m) 0.0000 0.0000 0.0000 0.0000
48 Flow Regime Vapour Only Vapour Only Vapour Only Vapour Only
49 Liquid HoldUp 0.0000 0.0000 0.0000 0.0000
50 Friction Gradient (kPa/m) 7.069e-004 7.069e-004 7.070e-004 7.070e-004
51 Static Gradient (kPa/m) 0.0000 2.941e-003 2.941e-003 2.941e-003
52 Accel. Gradient (kPa/m) 0.0000 0.0000 0.0000 0.0000
53 Liq. Reynolds --- --- --- ---
54 Vap. Reynolds 8.771e+005 8.771e+005 8.771e+005 8.772e+005
55 Liquid Velocity (m/s) --- --- --- ---
56 Vapour Velocity (m/s) 0.7737 0.7737 0.7738 0.7738
57 Deposit Thickness (mm) --- --- --- ---
58 Deposit Volume (m3) --- --- --- ---
59 Length (m) 4400 4500 4600 4700
60 Elevation (m) 34.40 35.00 35.00 35.00
61 Pressure (kPa) 4735 4735 4735 4735
62 Temperature (C) 30.92 30.91 30.91 30.91
63 Vapour Fraction 1.0000 1.0000 1.0000 1.0000
64 Heat Transferred (kJ/h-m) 0.0000 0.0000 0.0000 0.0000
65 Flow Regime Vapour Only Vapour Only Vapour Only Vapour Only
66 Liquid HoldUp 0.0000 0.0000 0.0000 0.0000
67 Friction Gradient (kPa/m) 7.070e-004 7.071e-004 7.071e-004 7.071e-004
68 Static Gradient (kPa/m) 2.941e-003 2.940e-003 0.0000 0.0000
69 Aspen Technology Inc. Aspen HYSYS Version 8.8 (34.0.0.8909) Page 7 of 16
Licensed to: LEGENDS * Specified by user.
1
Case Name: Tugas 2.hsc
2 LEGENDS
3 Bedford, MA Unit Set: SI
4 USA
Date/Time: Thu Apr 19 21:30:15 2018
5
6
7 Pipe Segment: Subsea Piping (continued)
8
9
10
PROFILES
11
12
Pipe Table
13 Accel. Gradient (kPa/m) 0.0000 0.0000 0.0000 0.0000
14 Liq. Reynolds --- --- --- ---
15 Vap. Reynolds 8.772e+005 8.772e+005 8.772e+005 8.772e+005
16 Liquid Velocity (m/s) --- --- --- ---
17 Vapour Velocity (m/s) 0.7739 0.7739 0.7739 0.7740
18 Deposit Thickness (mm) --- --- --- ---
19 Deposit Volume (m3) --- --- --- ---
20 Length (m) 4800 4900 5000 5100
21 Elevation (m) 35.00 35.00 35.00 36.20
22 Pressure (kPa) 4735 4735 4735 4734
23 Temperature (C) 30.91 30.91 30.91 30.90
24 Vapour Fraction 1.0000 1.0000 1.0000 1.0000
25 Heat Transferred (kJ/h-m) 0.0000 0.0000 0.0000 0.0000
26 Flow Regime Vapour Only Vapour Only Vapour Only Vapour Only
27 Liquid HoldUp 0.0000 0.0000 0.0000 0.0000
28 Friction Gradient (kPa/m) 7.071e-004 7.071e-004 7.071e-004 7.072e-004
29 Static Gradient (kPa/m) 0.0000 0.0000 0.0000 5.880e-003
30 Accel. Gradient (kPa/m) 0.0000 0.0000 0.0000 0.0000
31 Liq. Reynolds --- --- --- ---
32 Vap. Reynolds 8.772e+005 8.772e+005 8.772e+005 8.772e+005
33 Liquid Velocity (m/s) --- --- --- ---
34 Vapour Velocity (m/s) 0.7740 0.7740 0.7740 0.7741
35 Deposit Thickness (mm) --- --- --- ---
36 Deposit Volume (m3) --- --- --- ---
37 Length (m) 5200 5300 5400 5500
38 Elevation (m) 37.40 38.60 39.80 41.00
39 Pressure (kPa) 4733 4733 4732 4731
40 Temperature (C) 30.89 30.88 30.88 30.87
41 Vapour Fraction 1.0000 1.0000 1.0000 1.0000
42 Heat Transferred (kJ/h-m) 0.0000 0.0000 0.0000 0.0000
43 Flow Regime Vapour Only Vapour Only Vapour Only Vapour Only
44 Liquid HoldUp 0.0000 0.0000 0.0000 0.0000
45 Friction Gradient (kPa/m) 7.073e-004 7.074e-004 7.074e-004 7.075e-004
46 Static Gradient (kPa/m) 5.879e-003 5.879e-003 5.878e-003 5.877e-003
47 Accel. Gradient (kPa/m) 0.0000 0.0000 0.0000 0.0000
48 Liq. Reynolds --- --- --- ---
49 Vap. Reynolds 8.773e+005 8.773e+005 8.774e+005 8.774e+005
50 Liquid Velocity (m/s) --- --- --- ---
51 Vapour Velocity (m/s) 0.7742 0.7743 0.7743 0.7744
52 Deposit Thickness (mm) --- --- --- ---
53 Deposit Volume (m3) --- --- --- ---
54 Length (m) 5600 5700 5800 5900
55 Elevation (m) 45.00 49.00 53.00 57.00
56 Pressure (kPa) 4729 4727 4725 4723
57 Temperature (C) 30.84 30.81 30.78 30.74
58 Vapour Fraction 1.0000 1.0000 1.0000 1.0000
59 Heat Transferred (kJ/h-m) 0.0000 0.0000 0.0000 0.0000
60 Flow Regime Vapour Only Vapour Only Vapour Only Vapour Only
61 Liquid HoldUp 0.0000 0.0000 0.0000 0.0000
62 Friction Gradient (kPa/m) 7.078e-004 7.080e-004 7.082e-004 7.084e-004
63 Static Gradient (kPa/m) 1.958e-002 1.958e-002 1.957e-002 1.956e-002
64 Accel. Gradient (kPa/m) 0.0000 0.0000 0.0000 0.0000
65 Liq. Reynolds --- --- --- ---
66 Vap. Reynolds 8.775e+005 8.776e+005 8.777e+005 8.778e+005
67 Liquid Velocity (m/s) --- --- --- ---
68 Vapour Velocity (m/s) 0.7747 0.7749 0.7752 0.7755
69 Aspen Technology Inc. Aspen HYSYS Version 8.8 (34.0.0.8909) Page 8 of 16
Licensed to: LEGENDS * Specified by user.
1
Case Name: Tugas 2.hsc
2 LEGENDS
3 Bedford, MA Unit Set: SI
4 USA
Date/Time: Thu Apr 19 21:30:15 2018
5
6
7 Pipe Segment: Subsea Piping (continued)
8
9
10
PROFILES
11
12
Pipe Table
13 Deposit Thickness (mm) --- --- --- ---
14 Deposit Volume (m3) --- --- --- ---
15 Length (m) 6000 6100 6200 6300
16 Elevation (m) 61.00 66.40 71.80 77.20
17 Pressure (kPa) 4721 4718 4716 4713
18 Temperature (C) 30.71 30.67 30.63 30.59
19 Vapour Fraction 1.0000 1.0000 1.0000 1.0000
20 Heat Transferred (kJ/h-m) 0.0000 0.0000 0.0000 0.0000
21 Flow Regime Vapour Only Vapour Only Vapour Only Vapour Only
22 Liquid HoldUp 0.0000 0.0000 0.0000 0.0000
23 Friction Gradient (kPa/m) 7.087e-004 7.090e-004 7.093e-004 7.096e-004
24 Static Gradient (kPa/m) 1.956e-002 2.639e-002 2.638e-002 2.637e-002
25 Accel. Gradient (kPa/m) 0.0000 0.0000 0.0000 0.0000
26 Liq. Reynolds --- --- --- ---
27 Vap. Reynolds 8.780e+005 8.781e+005 8.783e+005 8.784e+005
28 Liquid Velocity (m/s) --- --- --- ---
29 Vapour Velocity (m/s) 0.7757 0.7761 0.7764 0.7768
30 Deposit Thickness (mm) --- --- --- ---
31 Deposit Volume (m3) --- --- --- ---
32 Length (m) 6400 6500
33 Elevation (m) 82.60 88.00
34 Pressure (kPa) 4710 4708
35 Temperature (C) 30.55 30.51
36 Vapour Fraction 1.0000 1.0000
37 Heat Transferred (kJ/h-m) 0.0000 0.0000
38 Flow Regime Vapour Only Vapour Only
39 Liquid HoldUp 0.0000 0.0000
40 Friction Gradient (kPa/m) 7.099e-004 7.102e-004
41 Static Gradient (kPa/m) 2.636e-002 2.634e-002
42 Accel. Gradient (kPa/m) 0.0000 0.0000
43 Liq. Reynolds --- ---
44 Vap. Reynolds 8.786e+005 8.787e+005
45 Liquid Velocity (m/s) --- ---
46 Vapour Velocity (m/s) 0.7771 0.7775
47 Deposit Thickness (mm) --- ---
48 Deposit Volume (m3) --- ---
49
50
FLOW ASSURANCE
51
52
CO2 Corrosion
53
54
Model Options
55 Corrosion Model: NORSOK Standard M-506
56 Corrosion Inhibitor: 0.0000
57 pH: PH Specified
58 Input pH: 6.000
59
60
Corrosion Table
61 Length (m)
62 Temperature (C)
63 Pressure (kPa)
64 CO2 Pressure (kPa)
65 PH of CO2
66 Actual PH
67 Scale Factor
68 Scaling Temperature (C)
69 Aspen Technology Inc. Aspen HYSYS Version 8.8 (34.0.0.8909) Page 9 of 16
Licensed to: LEGENDS * Specified by user.
1
Case Name: Tugas 2.hsc
2 LEGENDS
3 Bedford, MA Unit Set: SI
4 USA
Date/Time: Thu Apr 19 21:30:15 2018
5
6
7 Pipe Segment: Subsea Piping (continued)
8
9
10
FLOW ASSURANCE
11
12
CO2 Corrosion
13
14
Corrosion Table
15 Mass Transfer Rate (mm/year)
16 Reaction Rate (mm/year)
17 Corrosion Rate (mm/year)
18 Scaled Corrosion Rate (mm/year)
19
20
Erosion
21
22
Model
23 Erosion Model: API-RP-14E Continuous service Empirical Constant: 100.0
24
25
Erosion Table
26 Length (m)
27 Bulk Density (kg/m3)
28 Bulk Velocity (m/s)
29 Erosion Velocity (m/s)
30
31
Hydrates
32
33
Model Options
34 Hydrate Model: Ng & Robinson
35 Override Ng and Robinson: False
36 Initial Pressure: From a Correlation
37 Initial Pressure User Input: 3.470e-310 kPa *
38
39
Hydrates Table
40 Distance (m) 0.0000 100.0 200.0 300.0 400.0
41 Pressure (kPa)
42 Temperature (C)
43 Formation
44 Hydrate Type
45 Mode
46 Inhibitors
47 Formation Temperature (C)
48 Type at Formation Temperature
49 Mode at Formation Temperature
50 Phases at Formation Temperature
51 Inhibitors at Formation Temperature
52 Distance (m) 500.0 600.0 700.0 800.0 900.0
53 Pressure (kPa)
54 Temperature (C)
55 Formation
56 Hydrate Type
57 Mode
58 Inhibitors
59 Formation Temperature (C)
60 Type at Formation Temperature
61 Mode at Formation Temperature
62 Phases at Formation Temperature
63 Inhibitors at Formation Temperature
64 Distance (m) 1000 1100 1200 1300 1400
65 Pressure (kPa)
66 Temperature (C)
67 Formation
68 Hydrate Type
69 Aspen Technology Inc. Aspen HYSYS Version 8.8 (34.0.0.8909) Page 10 of 16
Licensed to: LEGENDS * Specified by user.
1
Case Name: Tugas 2.hsc
2 LEGENDS
3 Bedford, MA Unit Set: SI
4 USA
Date/Time: Thu Apr 19 21:30:15 2018
5
6
7 Pipe Segment: Subsea Piping (continued)
8
9
10
FLOW ASSURANCE
11
12
Hydrates
13
14
Hydrates Table
15 Mode
16 Inhibitors
17 Formation Temperature (C)
18 Type at Formation Temperature
19 Mode at Formation Temperature
20 Phases at Formation Temperature
21 Inhibitors at Formation Temperature
22 Distance (m) 1500 1600 1700 1800 1900
23 Pressure (kPa)
24 Temperature (C)
25 Formation
26 Hydrate Type
27 Mode
28 Inhibitors
29 Formation Temperature (C)
30 Type at Formation Temperature
31 Mode at Formation Temperature
32 Phases at Formation Temperature
33 Inhibitors at Formation Temperature
34 Distance (m) 2000 2100 2200 2300 2400
35 Pressure (kPa)
36 Temperature (C)
37 Formation
38 Hydrate Type
39 Mode
40 Inhibitors
41 Formation Temperature (C)
42 Type at Formation Temperature
43 Mode at Formation Temperature
44 Phases at Formation Temperature
45 Inhibitors at Formation Temperature
46 Distance (m) 2500 2600 2700 2800 2900
47 Pressure (kPa)
48 Temperature (C)
49 Formation
50 Hydrate Type
51 Mode
52 Inhibitors
53 Formation Temperature (C)
54 Type at Formation Temperature
55 Mode at Formation Temperature
56 Phases at Formation Temperature
57 Inhibitors at Formation Temperature
58 Distance (m) 3000 3100 3200 3300 3400
59 Pressure (kPa)
60 Temperature (C)
61 Formation
62 Hydrate Type
63 Mode
64 Inhibitors
65 Formation Temperature (C)
66 Type at Formation Temperature
67 Mode at Formation Temperature
68 Phases at Formation Temperature
69 Aspen Technology Inc. Aspen HYSYS Version 8.8 (34.0.0.8909) Page 11 of 16
Licensed to: LEGENDS * Specified by user.
1
Case Name: Tugas 2.hsc
2 LEGENDS
3 Bedford, MA Unit Set: SI
4 USA
Date/Time: Thu Apr 19 21:30:15 2018
5
6
7 Pipe Segment: Subsea Piping (continued)
8
9
10
FLOW ASSURANCE
11
12
Hydrates
13
14
Hydrates Table
15 Inhibitors at Formation Temperature
16 Distance (m) 3500 3600 3700 3800 3900
17 Pressure (kPa)
18 Temperature (C)
19 Formation
20 Hydrate Type
21 Mode
22 Inhibitors
23 Formation Temperature (C)
24 Type at Formation Temperature
25 Mode at Formation Temperature
26 Phases at Formation Temperature
27 Inhibitors at Formation Temperature
28 Distance (m) 4000 4100 4200 4300 4400
29 Pressure (kPa)
30 Temperature (C)
31 Formation
32 Hydrate Type
33 Mode
34 Inhibitors
35 Formation Temperature (C)
36 Type at Formation Temperature
37 Mode at Formation Temperature
38 Phases at Formation Temperature
39 Inhibitors at Formation Temperature
40 Distance (m) 4500 4600 4700 4800 4900
41 Pressure (kPa)
42 Temperature (C)
43 Formation
44 Hydrate Type
45 Mode
46 Inhibitors
47 Formation Temperature (C)
48 Type at Formation Temperature
49 Mode at Formation Temperature
50 Phases at Formation Temperature
51 Inhibitors at Formation Temperature
52 Distance (m) 5000 5100 5200 5300 5400
53 Pressure (kPa)
54 Temperature (C)
55 Formation
56 Hydrate Type
57 Mode
58 Inhibitors
59 Formation Temperature (C)
60 Type at Formation Temperature
61 Mode at Formation Temperature
62 Phases at Formation Temperature
63 Inhibitors at Formation Temperature
64 Distance (m) 5500 5600 5700 5800 5900
65 Pressure (kPa)
66 Temperature (C)
67 Formation
68 Hydrate Type
69 Aspen Technology Inc. Aspen HYSYS Version 8.8 (34.0.0.8909) Page 12 of 16
Licensed to: LEGENDS * Specified by user.
1
Case Name: Tugas 2.hsc
2 LEGENDS
3 Bedford, MA Unit Set: SI
4 USA
Date/Time: Thu Apr 19 21:30:15 2018
5
6
7 Pipe Segment: Subsea Piping (continued)
8
9
10
FLOW ASSURANCE
11
12
Hydrates
13
14
Hydrates Table
15 Mode
16 Inhibitors
17 Formation Temperature (C)
18 Type at Formation Temperature
19 Mode at Formation Temperature
20 Phases at Formation Temperature
21 Inhibitors at Formation Temperature
22 Distance (m) 6000 6100 6200 6300 6400
23 Pressure (kPa)
24 Temperature (C)
25 Formation
26 Hydrate Type
27 Mode
28 Inhibitors
29 Formation Temperature (C)
30 Type at Formation Temperature
31 Mode at Formation Temperature
32 Phases at Formation Temperature
33 Inhibitors at Formation Temperature
34 Distance (m) 6500
35 Pressure (kPa)
36 Temperature (C)
37 Formation
38 Hydrate Type
39 Mode
40 Inhibitors
41 Formation Temperature (C)
42 Type at Formation Temperature
43 Mode at Formation Temperature
44 Phases at Formation Temperature
45 Inhibitors at Formation Temperature
46
47
SLUG ANALYSIS
48
49
Options
50 Translation Model Bendikson Velocity Parm. C0 --- Velocity Parm. U0 ---
51 Holdup Model Gregory et al Holdup Parm. --- Friction Model Colebrook
52 Frequency Model Hill & Wood Freq Parm. ---
53
54
Results
55 Not Calculated
56
57
WAX DEPOSITION
58
59
Methods
60 Method None Time Step 4.320e+004 seconds
61 Max. Time 6.048e+005 seconds Simulation Time ---
62
63
Properties
64 Density 881.0 kg/m3 Yield Strength 2.068 kPa
65 Thermal Conductivity 0.2596 W/m-K
66
67
Profile
68 Cell 1 2 3 4 5
69 Aspen Technology Inc. Aspen HYSYS Version 8.8 (34.0.0.8909) Page 13 of 16
Licensed to: LEGENDS * Specified by user.
1
Case Name: Tugas 2.hsc
2 LEGENDS
3 Bedford, MA Unit Set: SI
4 USA
Date/Time: Thu Apr 19 21:30:15 2018
5
6
7 Pipe Segment: Subsea Piping (continued)
8
9
10
FLOW ASSURANCE
11
12
WAX DEPOSITION
13
14
Profile
15 Cum. Length (m) 100.000 200.000 300.000 400.000 500.000
16 Init. Dep. Thick. (mm) --- --- --- --- ---
17 Calc. Dep. Thick. (mm) --- --- --- --- ---
18 Dep. Volume (m3) --- --- --- --- ---
19 Dep. Rate (kg/s-m2) --- --- --- --- ---
20 Film Coefficient (kJ/h-m2-C) 3582.63 3582.68 3582.73 3582.79 3582.84
21 Wall Temperature (C) --- --- --- --- ---
22 Fluid Temperature (C) --- --- --- --- ---
23 Critical Deposition Temperature (C) --- --- --- --- ---
24 Cell 6 7 8 9 10
25 Cum. Length (m) 600.000 700.000 800.000 900.000 1000.00
26 Init. Dep. Thick. (mm) --- --- --- --- ---
27 Calc. Dep. Thick. (mm) --- --- --- --- ---
28 Dep. Volume (m3) --- --- --- --- ---
29 Dep. Rate (kg/s-m2) --- --- --- --- ---
30 Film Coefficient (kJ/h-m2-C) 3581.99 3581.14 3580.29 3579.44 3578.58
31 Wall Temperature (C) --- --- --- --- ---
32 Fluid Temperature (C) --- --- --- --- ---
33 Critical Deposition Temperature (C) --- --- --- --- ---
34 Cell 11 12 13 14 15
35 Cum. Length (m) 1100.00 1200.00 1300.00 1400.00 1500.00
36 Init. Dep. Thick. (mm) --- --- --- --- ---
37 Calc. Dep. Thick. (mm) --- --- --- --- ---
38 Dep. Volume (m3) --- --- --- --- ---
39 Dep. Rate (kg/s-m2) --- --- --- --- ---
40 Film Coefficient (kJ/h-m2-C) 3578.40 3578.21 3578.03 3577.84 3577.66
41 Wall Temperature (C) --- --- --- --- ---
42 Fluid Temperature (C) --- --- --- --- ---
43 Critical Deposition Temperature (C) --- --- --- --- ---
44 Cell 16 17 18 19 20
45 Cum. Length (m) 1600.00 1700.00 1800.00 1900.00 2000.00
46 Init. Dep. Thick. (mm) --- --- --- --- ---
47 Calc. Dep. Thick. (mm) --- --- --- --- ---
48 Dep. Volume (m3) --- --- --- --- ---
49 Dep. Rate (kg/s-m2) --- --- --- --- ---
50 Film Coefficient (kJ/h-m2-C) 3577.19 3576.72 3576.25 3575.78 3575.30
51 Wall Temperature (C) --- --- --- --- ---
52 Fluid Temperature (C) --- --- --- --- ---
53 Critical Deposition Temperature (C) --- --- --- --- ---
54 Cell 21 22 23 24 25
55 Cum. Length (m) 2100.00 2200.00 2300.00 2400.00 2500.00
56 Init. Dep. Thick. (mm) --- --- --- --- ---
57 Calc. Dep. Thick. (mm) --- --- --- --- ---
58 Dep. Volume (m3) --- --- --- --- ---
59 Dep. Rate (kg/s-m2) --- --- --- --- ---
60 Film Coefficient (kJ/h-m2-C) 3575.26 3575.22 3575.18 3575.13 3575.09
61 Wall Temperature (C) --- --- --- --- ---
62 Fluid Temperature (C) --- --- --- --- ---
63 Critical Deposition Temperature (C) --- --- --- --- ---
64 Cell 26 27 28 29 30
65 Cum. Length (m) 2600.00 2700.00 2800.00 2900.00 3000.00
66 Init. Dep. Thick. (mm) --- --- --- --- ---
67 Calc. Dep. Thick. (mm) --- --- --- --- ---
68 Dep. Volume (m3) --- --- --- --- ---
69 Aspen Technology Inc. Aspen HYSYS Version 8.8 (34.0.0.8909) Page 14 of 16
Licensed to: LEGENDS * Specified by user.
1
Case Name: Tugas 2.hsc
2 LEGENDS
3 Bedford, MA Unit Set: SI
4 USA
Date/Time: Thu Apr 19 21:30:15 2018
5
6
7 Pipe Segment: Subsea Piping (continued)
8
9
10
FLOW ASSURANCE
11
12
WAX DEPOSITION
13
14
Profile
15 Dep. Rate (kg/s-m2) --- --- --- --- ---
16 Film Coefficient (kJ/h-m2-C) 3574.86 3574.63 3574.39 3574.16 3573.93
17 Wall Temperature (C) --- --- --- --- ---
18 Fluid Temperature (C) --- --- --- --- ---
19 Critical Deposition Temperature (C) --- --- --- --- ---
20 Cell 31 32 33 34 35
21 Cum. Length (m) 3100.00 3200.00 3300.00 3400.00 3500.00
22 Init. Dep. Thick. (mm) --- --- --- --- ---
23 Calc. Dep. Thick. (mm) --- --- --- --- ---
24 Dep. Volume (m3) --- --- --- --- ---
25 Dep. Rate (kg/s-m2) --- --- --- --- ---
26 Film Coefficient (kJ/h-m2-C) 3573.84 3573.75 3573.66 3573.57 3573.47
27 Wall Temperature (C) --- --- --- --- ---
28 Fluid Temperature (C) --- --- --- --- ---
29 Critical Deposition Temperature (C) --- --- --- --- ---
30 Cell 36 37 38 39 40
31 Cum. Length (m) 3600.00 3700.00 3800.00 3900.00 4000.00
32 Init. Dep. Thick. (mm) --- --- --- --- ---
33 Calc. Dep. Thick. (mm) --- --- --- --- ---
34 Dep. Volume (m3) --- --- --- --- ---
35 Dep. Rate (kg/s-m2) --- --- --- --- ---
36 Film Coefficient (kJ/h-m2-C) 3573.43 3573.39 3573.35 3573.30 3573.26
37 Wall Temperature (C) --- --- --- --- ---
38 Fluid Temperature (C) --- --- --- --- ---
39 Critical Deposition Temperature (C) --- --- --- --- ---
40 Cell 41 42 43 44 45
41 Cum. Length (m) 4100.00 4200.00 4300.00 4400.00 4500.00
42 Init. Dep. Thick. (mm) --- --- --- --- ---
43 Calc. Dep. Thick. (mm) --- --- --- --- ---
44 Dep. Volume (m3) --- --- --- --- ---
45 Dep. Rate (kg/s-m2) --- --- --- --- ---
46 Film Coefficient (kJ/h-m2-C) 3573.07 3572.89 3572.70 3572.52 3572.33
47 Wall Temperature (C) --- --- --- --- ---
48 Fluid Temperature (C) --- --- --- --- ---
49 Critical Deposition Temperature (C) --- --- --- --- ---
50 Cell 46 47 48 49 50
51 Cum. Length (m) 4600.00 4700.00 4800.00 4900.00 5000.00
52 Init. Dep. Thick. (mm) --- --- --- --- ---
53 Calc. Dep. Thick. (mm) --- --- --- --- ---
54 Dep. Volume (m3) --- --- --- --- ---
55 Dep. Rate (kg/s-m2) --- --- --- --- ---
56 Film Coefficient (kJ/h-m2-C) 3572.29 3572.25 3572.20 3572.16 3572.12
57 Wall Temperature (C) --- --- --- --- ---
58 Fluid Temperature (C) --- --- --- --- ---
59 Critical Deposition Temperature (C) --- --- --- --- ---
60 Cell 51 52 53 54 55
61 Cum. Length (m) 5100.00 5200.00 5300.00 5400.00 5500.00
62 Init. Dep. Thick. (mm) --- --- --- --- ---
63 Calc. Dep. Thick. (mm) --- --- --- --- ---
64 Dep. Volume (m3) --- --- --- --- ---
65 Dep. Rate (kg/s-m2) --- --- --- --- ---
66 Film Coefficient (kJ/h-m2-C) 3571.79 3571.46 3571.14 3570.81 3570.48
67 Wall Temperature (C) --- --- --- --- ---
68 Fluid Temperature (C) --- --- --- --- ---
69 Aspen Technology Inc. Aspen HYSYS Version 8.8 (34.0.0.8909) Page 15 of 16
Licensed to: LEGENDS * Specified by user.
1
Case Name: Tugas 2.hsc
2 LEGENDS
3 Bedford, MA Unit Set: SI
4 USA
Date/Time: Thu Apr 19 21:30:15 2018
5
6
7 Pipe Segment: Subsea Piping (continued)
8
9
10
FLOW ASSURANCE
11
12
WAX DEPOSITION
13
14
Profile
15 Critical Deposition Temperature (C) --- --- --- --- ---
16 Cell 56 57 58 59 60
17 Cum. Length (m) 5600.00 5700.00 5800.00 5900.00 6000.00
18 Init. Dep. Thick. (mm) --- --- --- --- ---
19 Calc. Dep. Thick. (mm) --- --- --- --- ---
20 Dep. Volume (m3) --- --- --- --- ---
21 Dep. Rate (kg/s-m2) --- --- --- --- ---
22 Film Coefficient (kJ/h-m2-C) 3569.49 3568.50 3567.50 3566.51 3565.52
23 Wall Temperature (C) --- --- --- --- ---
24 Fluid Temperature (C) --- --- --- --- ---
25 Critical Deposition Temperature (C) --- --- --- --- ---
26 Cell 61 62 63 64 65
27 Cum. Length (m) 6100.00 6200.00 6300.00 6400.00 6500.00
28 Init. Dep. Thick. (mm) --- --- --- --- ---
29 Calc. Dep. Thick. (mm) --- --- --- --- ---
30 Dep. Volume (m3) --- --- --- --- ---
31 Dep. Rate (kg/s-m2) --- --- --- --- ---
32 Film Coefficient (kJ/h-m2-C) 3564.20 3562.88 3561.55 3560.23 3558.89
33 Wall Temperature (C) --- --- --- --- ---
34 Fluid Temperature (C) --- --- --- --- ---
35 Critical Deposition Temperature (C) --- --- --- --- ---
36
37
Limits
38 Allowable Max. Deposit Thickness --- Max. Deposit Thickness ---
39 Allowable Overall Pressure Drop --- Overall Pressure Drop 47.6914 kPa
40 Allowable Deposit Volume --- Deposit Volume ---
41 Allowable Plug Pressure Drop --- Plug Pressure Drop ---
42
43
DYNAMICS
44
45
Parameters
46 Pipe Flow Model 'Quick'n Dirty' Methods Pipe Friction Model turbulent Pipe Holdup Type one holdup per segment
47 Model Holdup Volume On Base Elevation of Inlet Relative to Ground 0.0000 m *
48
49
NOTES
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69 Aspen Technology Inc. Aspen HYSYS Version 8.8 (34.0.0.8909) Page 16 of 16
Licensed to: LEGENDS * Specified by user.

You might also like