Professional Documents
Culture Documents
in the evaluation of the events of the UE. The UE would use the original measurement value
of this cell plus the CIO as the measurement result for the intra-frequency handover
The larger this parameter is set, the easier the soft handover will be, and more UEs will be in
soft handover state. However, more resources are consumed. This smaller is parameter is set,
CIO is valid only for the neighbor cell. For Event 1A, the CIO can be set in the neighbor
cell; for Event 1B, the CIO can be set in the cell to be removed. The formula is as follows:
),2/(10)1(101011
aaBest
iNewNewHRLogMWMLogWCIOLogM
A
M New is the measurement of the to-be- evaluated cells that has entered the report range.
M i is the mean measurement result of cells (exclude the best cell) in an active set.
N A is the current cell number (exclude the best cell) in the active set.
M Best is the measurement result of the optimal cell in the active set.
W is the weight proportion of the best cell to theThe sum of the value of Cell Individual Offset (CIO)
and the actually measured value is used
in the evaluation of the events of the UE. The UE would use the original measurement value
of this cell plus the CIO as the measurement result for the intra-frequency handover
The larger this parameter is set, the easier the soft handover will be, and more UEs will be in
soft handover state. However, more resources are consumed. This smaller is parameter is set,
CIO is valid only for the neighbor cell. For Event 1A, the CIO can be set in the neighbor
cell; for Event 1B, the CIO can be set in the cell to be removed. The formula is as follows:
),2/(10)1(101011
aaBest
iNewNewHRLogMWMLogWCIOLogM
A
M New is the measurement of the to-be- evaluated cells that has entered the report range.
M i is the mean measurement result of cells (exclude the best cell) in an active set.
N A is the current cell number (exclude the best cell) in the active set.
M Best is the measurement result of the optimal cell in the active set.
W is the weight proportion of the best cell to theThe sum of the value of Cell Individual Offset (CIO)
and the actually measured value is used
in the evaluation of the events of the UE. The UE would use the original measurement value
of this cell plus the CIO as the measurement result for the intra-frequency handover
The larger this parameter is set, the easier the soft handover will be, and more UEs will be in
soft handover state. However, more resources are consumed. This smaller is parameter is set,
CIO is valid only for the neighbor cell. For Event 1A, the CIO can be set in the neighbor
cell; for Event 1B, the CIO can be set in the cell to be removed. The formula is as follows:
),2/(10)1(101011
aaBest
N
i
iNewNewHRLogMWMLogWCIOLogM
M New is the measurement of the to-be- evaluated cells that has entered the report range.
M i is the mean measurement result of cells (exclude the best cell) in an active set.
N A is the current cell number (exclude the best cell) in the active set.
M Best is the measurement result of the optimal cell in the active set.
W is the weight proportion of the best cell to theThe sum of the value of Cell Individual Offset (CIO)
and the actually measured value is used
in the evaluation of the events of the UE. The UE would use the original measurement value
of this cell plus the CIO as the measurement result for the intra-frequency handover
The larger this parameter is set, the easier the soft handover will be, and more UEs will be in
soft handover state. However, more resources are consumed. This smaller is parameter is set,
CIO is valid only for the neighbor cell. For Event 1A, the CIO can be set in the neighbor
cell; for Event 1B, the CIO can be set in the cell to be removed. The formula is as follows:
aaBest
iNewNewHRLogMWMLogWCIOLogM
M New is the measurement of the to-be- evaluated cells that has entered the report range.
M i is the mean measurement result of cells (exclude the best cell) in an active set.
N A is the current cell number (exclude the best cell) in the active set.
M Best is the measurement result of the optimal cell in the active set.
W is the weight proportion of the best cell to theThe sum of the value of Cell Individual Offset (CIO)
and the actually measured value is used
in the evaluation of the events of the UE. The UE would use the original measurement value
of this cell plus the CIO as the measurement result for the intra-frequency handover
judgment. CIO can help to ascertain the cell edge.
The larger this parameter is set, the easier the soft handover will be, and more UEs will be in
soft handover state. However, more resources are consumed. This smaller is parameter is set,
CIO is valid only for the neighbor cell. For Event 1A, the CIO can be set in the neighbor
cell; for Event 1B, the CIO can be set in the cell to be removed. The formula is as follows:
),2/(10)1(101011
aaBest
iNewNewHRLogMWMLogWCIOLogM
M New is the measurement of the to-be- evaluated cells that has entered the report range.
M i is the mean measurement result of cells (exclude the best cell) in an active set.
N A is the current cell number (exclude the best cell) in the active set.
M Best is the measurement result of the optimal cell in the active set.
W is the weight proportion of the best cell to theThe sum of the value of Cell Individual Offset (CIO)
and the actually measured value is used
in the evaluation of the events of the UE. The UE would use the original measurement value
of this cell plus the CIO as the measurement result for the intra-frequency handover
The larger this parameter is set, the easier the soft handover will be, and more UEs will be in
soft handover state. However, more resources are consumed. This smaller is parameter is set,
CIO is valid only for the neighbor cell. For Event 1A, the CIO can be set in the neighbor
cell; for Event 1B, the CIO can be set in the cell to be removed. The formula is as follows:
),2/(10)1(101011
aaBest
iNewNewHRLogMWMLogWCIOLogM
A
M New is the measurement of the to-be- evaluated cells that has entered the report range.
M i is the mean measurement result of cells (exclude the best cell) in an active set.
N A is the current cell number (exclude the best cell) in the active set.
M Best is the measurement result of the optimal cell in the active set.
W is the weight proportion of the best cell to theThe sum of the value of Cell Individual Offset (CIO)
and the actually measured value is used
in the evaluation of the events of the UE. The UE would use the original measurement value
of this cell plus the CIO as the measurement result for the intra-frequency handover
The larger this parameter is set, the easier the soft handover will be, and more UEs will be in
soft handover state. However, more resources are consumed. This smaller is parameter is set,
CIO is valid only for the neighbor cell. For Event 1A, the CIO can be set in the neighbor
cell; for Event 1B, the CIO can be set in the cell to be removed. The formula is as follows:
),2/(10)1(101011
aaBest
iNewNewHRLogMWMLogWCIOLogM
A
M New is the measurement of the to-be- evaluated cells that has entered the report range.
M i is the mean measurement result of cells (exclude the best cell) in an active set.
N A is the current cell number (exclude the best cell) in the active set.
M Best is the measurement result of the optimal cell in the active set.
W is the weight proportion of the best cell to theThe sum of the value of Cell Individual Offset (CIO)
and the actually measured value is used
in the evaluation of the events of the UE. The UE would use the original measurement value
of this cell plus the CIO as the measurement result for the intra-frequency handover
The larger this parameter is set, the easier the soft handover will be, and more UEs will be in
soft handover state. However, more resources are consumed. This smaller is parameter is set,
CIO is valid only for the neighbor cell. For Event 1A, the CIO can be set in the neighbor
cell; for Event 1B, the CIO can be set in the cell to be removed. The formula is as follows:
),2/(10)1(101011
1
aaBest
iNewNewHRLogMWMLogWCIOLogM
M New is the measurement of the to-be- evaluated cells that has entered the report range.
M i is the mean measurement result of cells (exclude the best cell) in an active set.
N A is the current cell number (exclude the best cell) in the active set.
M Best is the measurement result of the optimal cell in the active set.
W is the weight proportion of the best cell to theThe sum of the value of Cell Individual Offset (CIO)
and the actually measured value is used
in the evaluation of the events of the UE. The UE would use the original measurement value
of this cell plus the CIO as the measurement result for the intra-frequency handover
The larger this parameter is set, the easier the soft handover will be, and more UEs will be in
soft handover state. However, more resources are consumed. This smaller is parameter is set,
the more difficult the soft handover is.
CIO is valid only for the neighbor cell. For Event 1A, the CIO can be set in the neighbor
cell; for Event 1B, the CIO can be set in the cell to be removed. The formula is as follows:
),2/(10)1(101011
aaBest
iNewNewHRLogMWMLogWCIOLogM
M New is the measurement of the to-be- evaluated cells that has entered the report range.
M i is the mean measurement result of cells (exclude the best cell) in an active set.
N A is the current cell number (exclude the best cell) in the active set.
M Best is the measurement result of the optimal cell in the active set.
W is the weight proportion of the best cell to theThe sum of the value of Cell Individual Offset (CIO)
and the actually measured value is used
in the evaluation of the events of the UE. The UE would use the original measurement value
of this cell plus the CIO as the measurement result for the intra-frequency handover
The larger this parameter is set, the easier the soft handover will be, and more UEs will be in
soft handover state. However, more resources are consumed. This smaller is parameter is set,
CIO is valid only for the neighbor cell. For Event 1A, the CIO can be set in the neighbor
cell; for Event 1B, the CIO can be set in the cell to be removed. The formula is as follows:
),2/(10)1(101011
aaBest
iNewNewHRLogMWMLogWCIOLogM
A
M New is the measurement of the to-be- evaluated cells that has entered the report range.
M i is the mean measurement result of cells (exclude the best cell) in an active set.
N A is the current cell number (exclude the best cell) in the active set.
M Best is the measurement result of the optimal cell in the active set.
W is the weight proportion of the best cell to theThe sum of the value of Cell Individual Offset (CIO)
and the actually measured value is used
in the evaluation of the events of the UE. The UE would use the original measurement value
of this cell plus the CIO as the measurement result for the intra-frequency handover
The larger this parameter is set, the easier the soft handover will be, and more UEs will be in
soft handover state. However, more resources are consumed. This smaller is parameter is set,
CIO is valid only for the neighbor cell. For Event 1A, the CIO can be set in the neighbor
cell; for Event 1B, the CIO can be set in the cell to be removed. The formula is as follows:
),2/(10)1(101011
aaBest
iNewNewHRLogMWMLogWCIOLogM
A
M New is the measurement of the to-be- evaluated cells that has entered the report range.
M i is the mean measurement result of cells (exclude the best cell) in an active set.
N A is the current cell number (exclude the best cell) in the active set.
M Best is the measurement result of the optimal cell in the active set.