You are on page 1of 4

D10R Track-Type Tractor AKT00001-UP (MACHINE) POWERED BY 3412...

Página 1 de 4

Cerrar SIS

Pantalla anterior

Producto: TRACK-TYPE TRACTOR


Modelo: D10R TRACK-TYPE TRACTOR AKT
Configuración: D10R Track-Type Tractor AKT00001-UP (MACHINE)
POWERED BY 3412E Engine

Desarmado y Armado
3408E and 3412E Engines for Caterpillar Built Machines
Número de medio -RENR2336-02 Fecha de publicación -01/11/2006 Fecha de actualización -15/11/2006

i02172494

Water Pump - Disassemble


SMCS - 1361-015

Disassembly Procedure
Table 1

Required Tools
Tool Part Number Part Description Qty
8S-2264 Puller Group 1
1P-0510 Driver Group 1
A
4B-3903 Bolt 2
9M-1974 Flat Washer 4
5F-7465 Puller 1
1P-7461 Legs 2
B
5P-4750 Screw 1
1P-0510 Driver Group 1

Start By:

A. Remove the water pump. Refer to Disassembly and Assembly, "Water Pump - Remove".

NOTICE

https://127.0.0.1:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=... 18/04/2009
D10R Track-Type Tractor AKT00001-UP (MACHINE) POWERED BY 3412... Página 2 de 4

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.

Illustration 1 g01101100

1. Remove O-ring seal (2), adapter (1), and bolt (3) from the water pump. Remove the O-
ring seal from the adapter.

Illustration 2 g01101101

2. Use Tooling (A) to remove impeller (4) .

https://127.0.0.1:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=... 18/04/2009
D10R Track-Type Tractor AKT00001-UP (MACHINE) POWERED BY 3412... Página 3 de 4

Illustration 3 g01101105

3. Remove bolt (5) .

4. Use Tooling (B) to remove gear (6) .

Illustration 4 g01101106

5. Remove bolts (7), retainer (8), and bearing assembly (9) .

https://127.0.0.1:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=... 18/04/2009
D10R Track-Type Tractor AKT00001-UP (MACHINE) POWERED BY 3412... Página 4 de 4

Illustration 5 g01101108

6. Tap on shaft (10) with a rubber hammer in order to remove the shaft from ring (11) and
seal assembly (12) .

7. Remove ring (11) and seal assembly (12) from the impeller side of the water pump.

Illustration 6 g01101111

8. Remove lip seal (13) from the gear side of the water pump.

Copyright 1993 - 2009 Caterpillar Inc. Sat Apr 18 19:47:52 UTC-0300 2009
Todos los derechos reservados.
Red privada para licenciados del SIS.

https://127.0.0.1:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=... 18/04/2009

You might also like