Professional Documents
Culture Documents
Negative resistance magnetrons make use of negative resistance between two anode segments.
Cavity type magnetrons depends upon the interface of electrons with a rotating electromagnetic
field of constant angular velocity.
CONSTRUCTION
A magnetron consist of a cathode which is used to release the electrons and number of anode
cavities and a permanent magnet is placed on the flipside of cathode and the space between the
anode cavity and the cathode is called interacting space.
The electrons which are emitted from the cathode moves in diverse path in the interacting space
depending upon strength of electric and magnetic fields applied to the magnetron.
OPERATION
Depending upon the relative strength of the magnetic and electric field the electrons released
from the cavity move towards the anode will navigate through the interacting space.
o The magnetic field is applied perpendicular to electric field hence is is called axial magnetic
field, therefore the magnetrons are called cross field device because of radial electric field and
axial magnetic field are perpendicular to each other.
o If the magnetic field strength is more than the electrons emitted will return back to cathode with
high velocity which may destroy the cathode cavity this effect is called back heating of cathode.
The self oscillation can be maintained if the phase dissimilarity between anode cavity is N∏/4
and the best result can be obtained for N=4.
The travelling wave tube is a new sort of tube which displayed considerable promise as a board
band amplifier proposed by Pierce and others in 1946.
TWT AS AMPLIFIER
o The travelling wave tube is an amplifier which makes use of a distributed interaction between an
electron beam and travelling wave.
o In case of TWT the interacting space is extended for the total length of the tube so that bunching
takes place continuously.
o The basic structure of a TWT consist of a cathode to emit the electrons and input waveguide and
the output waveguide so as it give input signal and to take out the RF output.
o A magnetic field is applied so as to focus the electrons along the center of the helical structure.
o Attenuators are provided to absorb the reflected electrons so as to avoid occurrence of any
oscillation along the tube due to impedance variance.
SLOW WAVE STRUCTURE
Generally the phase velocity (Vp) of input signal (RF signal which is a microwave signal) is
larger than the speed of light ‘c’ , therefore for bunching to be possible both must move in the
same direction with the same velocity. Thus the Rf signal is made to pass through slow wave
structure so the axial component of the phase velocity almost equal to Ve.
OPERATION
TWT being an linear beam device mainly used in microwave amplifier in which the bunching
occurs continuously and to extend the interaction we introduce slow wave structure so that the
electrons beam RF signal move with same velocity in the same direction .
The electrons which move against the negative half cycle of the RF signal will bunch together
and transported energy to the RF and the bunching process is continues and we obtain the
amplified output across the output waveguide which is shown below
GAIN CHARACTERISTICS OF SLOW WAVE STRUCTURE
Ap=-9.54 + 47.3 NC db
Q)A travelling wave tibe (TWT) has the folliwing characteristics dc beam current(Io)=4mA,
beam Voltage(Vo)=2KV ,characteristics impedance(Z0)=20Ω,frequency f=8GHz.Calculate the
gain parameter and the power in db given the circuit length N=50?
Ans)
TWT KLYSTRON
In case of TWT the field travels along with theField is stationary only electron beam travels.
electron beam.
The interaction of the electron beam and the RF In this case the interaction take place only at the
field is continous over the entire length. gaps of afew resonant cavity.
The input wave in TWT is propagating wave The input waveis not propagating wave
The TWT is a non resonating microwaveKlystron is a resonating microwave circuit.
circuit.
Q)Explain bunching Process?
Ans:Bunching is a process by which the electrons take energy from the cavity at different time
and delivered to the cavity at the same time as shown in fig
Klystrons are linear tube in which the magnetic field is applied to focus the electron and
the electric field is applied to drift the electron.But,in case of magnetron both the electric and
magnetic fields are perpendicular to each other ,hence is called a cross field device.
In klystron the bunching takes place only inside the cavity which is very small width hence
,generate low power and low efficiency.But,in magnetron the interacting space or the bunching
space is extended ,so efficiency can be increased.
Magnetron are mainly used as oscillator in radar communication for telemery operation and also
used in missiles.
Ans:In case of magnetron both the electric field and magnetic field are perpendicular to each
other ,hence is called a cross field device
Ans:Applications are-