Professional Documents
Culture Documents
NAVIGATION AV SYSTEM
AVIC-F20BT
AVIC-F920BT
AVIC-F9210BT
AVIC-F9220BT
Be sure to read Important Information for the User
first!
Important Information for the User includes the
important information that you must understand before
using this navigation system.
English
Contents
Engb 3
Contents
4 Engb
Contents
Engb 5
Contents
Engb 7
Chapter
01 Introduction
8 Engb
Chapter
Introduction 01
Introduction
The SD memory card, SDHC memory card, mi- http://www.mp3licensing.com.
croSD card and microSDHC card are collec-
tively referred to as the “SD memory card”.
iPod compatibility
This product supports only the following iPod
Notice regarding video models and iPod software versions. Others
viewing may not work correctly.
! iPod nano first generation: Ver. 1.3.1
Remember that use of this system for com-
! iPod nano second generation: Ver. 1.1.3
mercial or public viewing purposes may con-
! iPod nano third generation: Ver. 1.1.3
stitute an infringement on the author’s rights
! iPod nano fourth generation: Ver. 1.0.3
as protected by the Copyright Law.
! iPod nano fifth generation: Ver. 1.0.1
! iPod fifth generation: Ver. 1.3
! iPod classic: Ver. 2.0.2
Notice regarding DVD- ! iPod touch first generation: Ver. 3.1.1
Video viewing ! iPod touch second generation: Ver. 3.1.1
! iPhone: Ver. 3.1.2
This product incorporates copyright protection
! iPhone 3G: Ver. 3.1.2
technology that is protected by method claims
! iPhone 3GS: Ver. 3.1.2
of certain U.S. patents and other intellectual
p In this manual, iPod and iPhone will be re-
property rights owned by Macrovision
ferred to as iPod.
Corporation and other rights owners. Use of
p When you use this navigation system with
this copyright protection technology must be
a Pioneer USB interface cable for iPod (CD-
authorised by Macrovision Corporation, and is
IU50V) (sold separately), you can control an
intended for home and other limited viewing
iPod compatible with this navigation sys-
uses only unless otherwise authorised by
tem.
Macrovision Corporation. Reverse engineering
p To obtain maximum performance, we re-
or disassembly is prohibited.
commend that you use the latest software
for the iPod.
p Operation methods may vary depending on
Notice regarding MP3 file the iPod models and the software version
usage of iPod.
p For details about iPod compatibility with
Supply of this navigation system conveys only
this navigation system, refer to the informa-
a licence for private, non-commercial use and
tion on our website.
does not convey a licence nor imply any right
p iPod is a trademark of Apple Inc., regis-
to use this product in any commercial (i.e. rev-
tered in the U.S. and other countries.
enue-generating), real time broadcasting (ter-
p iPhone is a trademark of Apple Inc.
restrial, satellite, cable and/or any other
media), broadcasting/streaming via internet,
intranets and/or other networks or in other
electronic content distribution systems, such Map coverage
as pay-audio or audio-on-demand applica- For details about the map coverage of this na-
tions. An independent licence for such use is vigation system, refer to the information on
our website.
Engb 9
Chapter
01 Introduction
10 Engb
Chapter
Basic operation 02
Basic operation
1 2 3 4 5 6 7
AVIC-F20BT (with the LCD panel closed)
Engb 11
Chapter
02 Basic operation
6 8 9
3
7
4
AVIC-F920BT
8 9
1 6
3 4
2 5
AVIC-F9210BT, AVIC-F9220BT
1 button Press and hold the button to switch the
! AVIC-F20BT AV source to mute.
Press the button to activate voice op- To cancel the muting, press and hold it
erations. again.
! AVIC-F920BT, AVIC-F9210BT, AVIC-
F9220BT 2 VOL (+/–) button
Press the button to hear the next gui- Press to adjust the AV (Audio and Video)
dance. source volume.
12 Engb
Chapter
Basic operation 02
3 HOME button
! Press the HOME button to display the WARNING
“Top Menu” screen. When opening, closing and adjusting the angle
Basic operation
! Press to switch between the “Classic of the LCD panel, be careful not to get your fin-
Menu” and the “Shortcut Menu” while gers caught.
the “Top Menu” is displayed.
= For details, refer to What you can do CAUTION
on each menu on page 21. Do not open or close the LCD panel by force. This
! Press and hold to turn off the screen dis- may cause malfunction.
play.
1 Press the h button.
4 MODE button The “Monitor Setup” screen appears.
! Press to switch between the map screen
and the AV operation screen. 2 Touch or to adjust the angle.
! Press to display the map screen while
the navigation function screen is dis-
played.
! Press and hold to display the “Picture
Adjustment” screen.
= For details, refer to Adjusting the pic-
ture on page 143.
5 TRK button
Press to perform manual seek tuning, fast 3 Touch .
forward, reverse and track search controls. p The adjusted angle of the LCD panel will be
= For details, refer to the descriptions from memorised and the LCD panel will automa-
Chapter 14 to Chapter 26. tically return to that angle the next time the
LCD panel is opened or closed.
6 h button
7 LCD screen
Inserting and ejecting a disc
8 Disc loading slot
Insert a disc to play.
Inserting a disc (for AVIC-F20BT)
= For details of the operation, refer to In- p This section describes operations for AVIC-
serting and ejecting a disc on this page. F20BT.
9 SD card slot
WARNING
= For more detailed information, refer to In-
! When opening, closing and adjusting the
serting and ejecting an SD memory card
angle of the LCD panel, be careful not to get
on page 15.
your fingers caught.
! Do not use with the LCD panel left open. If
LCD panel is left open, it may result in injury
Adjusting the LCD panel angle in the event of an accident.
p This function is available for AVIC-F20BT
only.
Engb 13
Chapter
02 Basic operation
14 Engb
Chapter
Basic operation 02
Basic operation
1 Press the h button.
The “Monitor Setup” screen appears.
CAUTION
! Do not press the h button when an SD mem-
ory card is not fully inserted. Doing so may da-
mage the card.
Engb 15
Chapter
02 Basic operation
16 Engb
Chapter
Basic operation 02
Basic operation
mised POI data, is stored on the SD memory
p This section describes operations for AVIC-
card, operating procedures are slightly differ-
F920BT, AVIC-F9210BT, and AVIC-F9220BT.
ent.
1 Press the h button.
1 Press the h button and then touch
The touch panel keys for ejecting the media
[Eject SD].
appear.
2 Touch [Yes].
2 Touch [Eject SD].
4 Touch [OK].
The navigation system restarts.
Engb 17
Chapter
02 Basic operation
! If data loss or corruption occurs on the sto- no liability for damages, costs or expenses
rage device for any reason, it is usually not arising from data loss or corruption.
possible to recover the data. Pioneer accepts
no liability for damages, costs or expenses
arising from data loss or corruption. Connecting your iPod
Using the USB interface cable for iPod en-
ables you to connect your iPod to the naviga-
Plugging in a USB storage device tion system.
% Plug a USB storage device into the USB p A USB interface cable for iPod (CD-IU50V)
connector. (sold separately) is required for connection.
USB connector 1 Pull out the USB storage device after
checking that no data is being accessed.
Unplugging a USB storage device p For details about iPod compatibility with
this navigation system, refer to the informa-
% Pull out the USB storage device after tion on our website.
checking that no data is being accessed. p Connection via a USB hub is not possible.
18 Engb
Chapter
Basic operation 02
Basic operation
1 Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
p To protect the LCD screen from damage, be
sure to touch the touch panel keys with
your finger only and gently touch the
screen.
On first-time startup
When you use the navigation system for the
first time, select the language that you want to
use.
Engb 19
Chapter
2 3 4
1 1
20 Engb
Chapter
Shortcut Menu
p In this manual, Classic Menu will be re- The Shortcut selection screen appears.
ferred to as “Top Menu”. 3 Touch the tab on the right edge or scroll
2 Destination Menu the bar to display the icon that you want
You can search for your destination on this to set to shortcut.
menu. You can also check or cancel your set
route from this menu.
3 Phone Menu
You can access the screen that is related to
hands-free phoning to see call histories and
change the settings on the Bluetooth wireless
technology connection.
4 AV operation screen
This is the screen that normally appears when
Scroll bar
you play the AV source.
5 Settings Menu 4 Touch and hold the icon that you want
You can access the screen to customise set- to add to shortcut.
tings.
6 Map screen 5 Move the icon to the left side of the
Press the MODE button to display the naviga- screen, and then release it.
tion map screen. The selected item is added to shortcut.
Engb 21
Chapter
2 8
3
Cancelling the shortcut
1 Touch and hold the icon that you want 4
to cancel the shortcut.
5 6 7
2 Move the icon to the right side of the
screen, and then release it. 1 Screen title
The screen title appears.
Operating list screens (e.g. 2 Text box
POI list) Displays the characters that are entered. If
there is no text in the box, an informative
1 4 5 guide with text appears.
3 Keyboard
Touch the keys to enter the characters.
4
2 Returns the previous screen.
5 Keys
Switches the on-screen keyboard layout.
3 6 Sym., Others, 0-9
You can enter other characters of alphabet.
1 Screen title You can also enter text with marks such as [&]
2 or [+] or numbers.
Touching or on the scroll bar scrolls Touch to toggle the selection.
through the list and allows you to view the re- p When you use any of “A”, “Ä”, “Å”, “Æ”,
maining items. the displayed result is the same.
3 7 OK
Returns the previous screen. Confirms the entry and allows you to proceed
4 Listed items to the next step.
Touching an item on the list allows you to nar- 8
row down the options and proceed to the next Deletes the input text one letter at a time, be-
operation. ginning at the end of the text. Continuing to
5 touch the button deletes all of the text.
If all of the characters cannot be displayed
within the displayed area, touching the key to
the right of the item allows you to see remain-
ing characters.
22 Engb
Chapter
Most of the information provided by your navigation system can be seen on the map. You need to be-
come familiar with how information appears on the map.
3 e
d
4 c
5 b
6
7
8 9 a
p Information with an asterisk (*) appears Shows the turning direction after next and the
only when the route is set. distance to there.
p Depending on the conditions and settings, = For details, refer to Displaying man-
some items may not be displayed. oeuvres on page 132.
1 Name of the street to be used (or next gui- 5 Zoom in/Zoom out
dance point)* Touching displays touch panel keys for
2 Next direction of travel* changing the map scale and the map orienta-
When you approach a guidance point, this tion.
item appears. 6 Current position
As you get closer to the guidance point, the Indicates the current location of your vehicle.
colour of the item changes to green. The apex of the triangular mark indicates your
p Touching this item enables you to hear orientation and the display moves automati-
the next guidance again. cally as you drive.
p You can select between display and p The apex of the triangular mark is the
non-display. proper current position.
= For details, refer to Displaying man- 7 Eco-Meter
oeuvres on page 132. Displays a graph comparing the past average
3 Distance to the guidance point* fuel mileage and the average fuel mileage
Shows the distance to the next guidance since the navigation system was last started.
point. = For details, refer to Displaying the fuel
p Touching this item enables you to hear consumption information on page 132.
the next guidance again. 8 Street name (or city name) that your vehi-
4 Second Manoeuvre Arrow* cle is travelling along
Engb 23
Chapter
= For details, refer to Setting the current for “Average Speed” and the actual
street name display on page 131. driving speed. The estimated time of ar-
9 Extension tab for the AV information bar rival is only a reference value, and does
Touching this tab opens the AV information not guarantee arrival at that time.
bar and enables you to briefly view the current ! Travel time to your destination or
status on the AV source. Touching it again re- waypoint*
tracts the bar. h Current time
a Shortcut to the AV operation screen
The AV source currently selected is shown. Meaning of guidance flags
Touching the indicator displays the AV opera- Destination
tion screen of the current source directly. The checkered flag indicates your
p If you connect your iPod to this naviga- destination.
tion system, the artwork for the album Waypoint
The blue flags indicate your way-
that is playing appears. points.
b Quick Access icon Guidance point
Displays the “Quick Access” menu. The next guidance point (next turn-
= For details, refer to Setting the “Quick ing point, etc.) is shown by a yel-
Access” menu on page 26. low flag.
c Map orientation indicator
! When “North up” is selected, is dis-
played. Enlarged map of the intersection
! When “Heading up” is selected, is When “Close Up View” in the “Map Settings”
displayed. screen is “On”, an enlarged map of the inter-
p The red arrow indicates north. section appears.
d Current route*
The route currently set is highlighted in colour
on the map. If a waypoint is set on the route,
the route after the next waypoint is high-
lighted in another colour.
e Direction line*
The direction towards your destination (next
waypoint, or cursor) is indicated with a
straight line. = For details, refer to Setting the auto-zoom
f Bluetooth connection icon display on page 129.
This icon shows whether the device featuring
Bluetooth technology is connected or not. You
can select between display and non-display.
= For details, refer to Displaying the Blue-
tooth connection icon on page 131.
g Multi-Info window
Each touch of [Multi-Info window] changes
the display information.
! Distance to the destination (or dis-
tance to waypoint)*
! Estimated time of arrival at your des-
tination or waypoint*
The estimated time of arrival is an ideal
value calculated based on the value set
24 Engb
Chapter
Display during motorway driving able route on the map (only the arrival gui-
In certain locations of the motorway, lane in- dance for the destination or a waypoint is
formation is available, indicating the recom- available). Please review and obey all local traf-
mended lane to be in to easily manoeuvre the fic rules along the highlighted route. (For your
next guidance. safety.)
Engb 25
Chapter
p The map orientation is fixed at “North up” screen, with street name and other informa-
when the map scale is 50 kilometres (25 tion for this location being shown. (The infor-
miles) or more. mation shown varies depending on the
p The map orientation is fixed at “Heading position.)
up” when the 3D map screen is displayed. p The scrolling increment depends on your
dragging length.
1 Display the map screen. # Touch .
The map returns to the current position.
2 Touch on the map screen.
p Pressing MODE button returns the map to
or appears.
the current position.
1 : Route Options*
Displayed when the map is not scrolled. This
item can be selected only during route gui-
dance.
2
You can modify the conditions for route calcu-
1 Cursor lation and recalculate the current route.
2 Distance from the current position = For details, refer to Modifying the route cal-
Positioning the cursor to the desired location culation conditions on page 41.
results in a brief informational overview about : Destination*
the location being displayed at the bottom of
26 Engb
Chapter
1 Display the “Map Settings” screen. — Name of the next route to be taken by
= For details, refer to Displaying the “Map the vehicle
Settings” screen on page 129. — Arrow indicating the direction of the ve-
hicle
2 Touch [View Mode]. — Distance to the guidance points
The “View Mode” screen appears. p This mode is available when the route is
set.
3 Touch the type that you want to set. ! Rear View:
You can select the following types: Displays the rear view image on the left
! 2D View (default): side of the screen and the map on the right
Displays a normal map (2D map). side of the screen.
Engb 27
Chapter
28 Engb
Chapter
Eco-driving function 05
This navigation system is equipped with an The green gauge indicates the current
Eco-driving function that can be used to esti- score, and the grey gauge indicates the
mate whether you are driving in an environ- best score to date.
mentally friendly way. The “Eco Score” is updated every 5 min-
This chapter describes this function. utes.
p The fuel mileage calculated is based on a p This is not displayed when “Eco Score”
theoretical value determined from vehicle is set to “Off” or when no route is set.
speed and position information from the 2 Best Score
navigation system. The fuel mileage dis- Displays the best score to date.
Eco-driving function
played is only a reference value, and does p This is not displayed when “Eco Score”
not guarantee the mileage displayed can is set to “Off” or when no route is set.
be obtained. 3 Average fuel mileage comparison graph
Displays a comparison of the average fuel
mileage up to the point the navigation sys-
Displaying “Eco Graph” tem was last stopped (past average fuel
mileage) and the current average fuel mile-
This function estimates approximate fuel mile- age. The display is updated every 3 sec-
age based on your driving, compares that with onds. The more the value moves in the
your average fuel mileage in the past, and dis- direction of +, the better the fuel mileage.
plays the results in a graph. There are three different graph bars.
The graph appears when the map display is ! Total
set to “Eco Graph”. A comparison of the past average fuel
mileage and the average fuel mileage
1 Display the “Map Settings” screen.
from the location the navigation system
= For details, refer to Displaying the “Map
was last started to the current driving lo-
Settings” screen on page 129.
cation.
2 Touch [View Mode]. ! : Ordinary Road
A comparison of the past average fuel
The “View Mode” screen appears.
mileage and the average fuel mileage
3 Touch [Eco Graph]. for 90 seconds in the past, while the ve-
The “Eco Graph” screen appears. hicle is driving on an ordinary road.
! : Motorway
1 A comparison of the past average fuel
2 mileage and the average fuel mileage
for 90 seconds in the past, while the ve-
3
hicle is driving on a motorway.
4 4 Animal icons
The number of displayed animal icons in-
creases or decreases according to the value
of “Eco Score”.
1 Eco Score
p This is not displayed when “Eco Score”
The result of the comparison of your past
is set to “Off” or when no route is set.
average fuel mileage and current average
p If you try to use the “Eco Graph” function
fuel mileage appears as a value from 0.0
immediately after you start using the navi-
Pts (points) to 10.0 Pts. The higher the
gation system for the first time, may be
value, the better the fuel mileage when
displayed and the function may not be avail-
compared to past route guidance.
able.
Engb 29
Chapter
05 Eco-driving function
1 Tree icon
As the level increases, a tree icon changes
from a young tree to a big tree.
p This is not displayed when “Eco Drive
Level” is set to “Off”.
= For details of the operation, refer to Chan-
ging the eco-function setting on page
128.
30 Engb
Chapter
j
5 Confirm the location on the map.
= For details, refer to Setting a route to
your destination on page 40.
j
6 The navigation system calculates the route
to your destination, and then shows the
route on the map.
j
7 Check and decide the route.
= For details, refer to Setting a route to
your destination on page 40.
j
8 Your navigation system sets the route to
your destination, and the map of your sur-
roundings appears.
j
9 After releasing the handbrake, drive in ac-
cordance with navigation guidance.
Engb 31
Chapter
Searching for a location by 4 Touch one of the items on the list to set
the country as search area.
address
The most frequently used function is “Ad-
dress”, in which the address is specified and
the destination is searched.
You can select the method of searching for a
location by address.
! Searching for a street name first
! Searching for a city name first
! Finding the location by specifying the post- The screen returns to the previous screen.
code
5 Touch [Street].
32 Engb
Chapter
9 Touch the desired city name. The “Select City” screen appears.
# Touch .
The representative location of the city appears on 5 Touch the desired city name.
the map screen. # Touch .
The representative location of the city appears on
10 Enter the house number and then the map screen.
touch [OK].
6 Enter the street name and then touch
[OK].
Engb 33
Chapter
1 Display the “Destination Menu” screen. If there is no house number, the searched lo-
= For details of the operations, refer to Screen cation appears on the map screen.
switching overview on page 20.
9 Touch the street you want.
2 Touch [Address]. The “Enter House Number” screen appears.
The “Address Search” screen appears. If the selected street has only one matching lo-
cation, the searched location appears on the
3 Touch the key next to “Country:” to dis- map screen.
play the country list.
10 Enter the house number and then
4 Touch one of the items on the list to set touch [OK].
the country as search area. The “House Number Selection” screen ap-
The screen returns to the previous screen. pears.
5 Touch [Postcode]. 11 Touch the desired house number range.
The “Enter Postcode” screen appears. The searched location appears on the map
screen.
6 Input the postcode.
= For the subsequent operations, refer to Set-
ting a route to your destination on page 40.
34 Engb
Chapter
Entering three keywords search for a POI by selecting the category (or
The names including the following words entering the POI Name).
below are displayed as a result:
! The words that completely match with both
first and second keywords you entered. Searching for POIs by preset
! The word beginning with the third keyword. categories
e.g. Searching “City of London”. You can search for POIs with a single touch
from the preset category.
Entered key-
Search results
words 1 Display the “Destination Menu” screen.
CITY L = For details of the operations, refer to Screen
Engb 35
Chapter
36 Engb
Chapter
Searching for POIs around the city = For the subsequent operations, refer to Set-
ting a route to your destination on page
You can search for POIs around a specified
40.
city.
2 Touch [Favourites].
Engb 37
Chapter
38 Engb
Chapter
5 Touch [OK].
The searched location appears on the map
screen.
= For the subsequent operations, refer to Set-
ting a route to your destination on the next
page.
Engb 39
Chapter
1
2
3
4
40 Engb
Chapter
Engb 41
Chapter
Avoid Toll Road p The system may calculate a route that in-
This setting controls whether toll roads (in- cludes streets or bridges that are subject to
cluding toll areas) should be taken into ac- traffic restrictions during a certain time
count. even if “On” is selected.
Off*:
Calculates a route that may include toll roads
CAUTION
(including toll areas).
If the time difference is not set correctly, the navi-
On:
gation system cannot consider traffic regulations
Calculates a route that avoids toll roads (in-
correctly. Set the time difference correctly (=
cluding toll areas).
Refer to Setting the time difference on page 137).
p The system may calculate a route that in-
cludes toll roads even if “On” is selected. Learning Route
The system learns the travel history of your ve-
Avoid Ferry
hicle for each road.
This setting controls whether ferry crossings
This setting controls whether or not the travel
should be taken into account.
history should be taken into account.
Off*:
On*:
Calculates a route that may include ferries.
Calculates a route with the travel history taken
On:
into account.
Calculates a route that avoids ferries.
Off:
p The system may calculate a route that in-
Calculates a route without the travel history
cludes ferries even if “On” is selected.
taken into account.
Avoid Motorway Clear:
This setting controls whether motorways may Clears the current travel history.
be included in the route calculation.
Off*:
Calculates a route that may include motor- Checking the current itinerary
ways. You can check the route details.
On:
Calculates a route that avoids motorways. 1 Display the “Route Overview” screen.
p The system may calculate a route that in- = For details, refer to Displaying the “Route
cludes motorways even if “On” is selected. Overview” screen on the previous page.
42 Engb
Chapter
Adding a waypoint
Up to 5 waypoints can be set, and waypoints
and final destination can be sorted automati- 6 Touch [OK] on the “Waypoints List”
cally or manually. screen.
1 Display the “Route Overview” screen.
= For details, refer to Displaying the “Route
Overview” screen on page 41.
Deleting a waypoint
You can delete waypoints from the route and
The “Select Search method” screen appears.
then recalculate the route. (You can delete
4 Search for a location. successive waypoints.)
1 Display the “Route Overview” screen.
= For details, refer to Displaying the “Route
Overview” screen on page 41.
2 Touch [Waypoints].
The “Waypoints List” screen appears.
3 Touch [Delete] next to the waypoint
that you want to delete.
= For details, refer to Chapter 6. The touched waypoint will be deleted from the
list.
4 Touch [OK] on the “Waypoints List”
screen.
The route is recalculated, and the Route con-
firmation screen appears.
5 Touch [OK].
The map of the current position appears.
Engb 43
Chapter
44 Engb
Chapter
Registering a location by
“Favourites”
Favourites can store up to 400 registered lo-
cations. These can include your home loca-
tion, favourite places, and destinations you 2 Touch to display the Quick Access
have already registered. menu.
p “Favourites” can store up to 400 locations.
p Home location is counted as one of the 3 Touch .
Engb 45
Chapter
4 Touch the item that you want to 3 Touch next to the home location.
change the setting.
46 Engb
Chapter
Engb 47
Chapter
48 Engb
Chapter
Engb 49
Chapter
The list will be sorted in the order of closed/ Traffic event icon
blocked roads, traffic jam, accidents, road
works and others.
Current order is indicated on the upper right of
the screen.
# Touch [Refresh].
When new traffic information is received, current
information is changed or old information has
been removed, the list is updated to reflect the
new situation.
! with yellow line:
5 Touch .
Stop-and-go traffic
The previous screen returns.
! with red line:
Stopped traffic
! with black line:
Checking traffic Closed/blocked roads
information on the route ! etc.:
All traffic information on the current route is Accidents, constructions, etc.
displayed on screen in a list.
1 Display the “Destination Menu” screen. Setting an alternative
= For details of the operations, refer to Screen
switching overview on page 20.
route to avoid traffic jams
The navigation system checks at regular inter-
2 Touch [Traffic]. vals whether or not there is the traffic informa-
The “Traffic Menu” screen appears. tion on your route. If the navigation system
3 Touch [Traffic on Route]. detects any traffic jams on your current route,
The “Traffic on Route” screen appears. the system tries to find a better route in the
The method for checking the content dis- background.
played on the screen is the same for Checking p The following types of traffic incidents on
all traffic information on the previous page. the route will be checked: slow, back ups,
stationary traffic, and closed/blocked roads
except for closed motorway exits/en-
How to read traffic trances.
information on the map
The traffic event information displayed on the
map is as follows.
p A line is displayed only when the map scale
is 5 km (2.5 miles) or lower.
p Icons appear only when the scale on the
map is 20 km (10 miles) or lower. If the
scale is changed, the icons are resized ac-
cording to the selected scale.
50 Engb
Chapter
Checking for traffic jams p The notification icon is not available if your
automatically vehicle deviates from the route.
If there is information about traffic jams on 1 Set [Show Traffic Incident] to “View”.
your current route and if an alternative route = For details, refer to Displaying the traffic no-
can be found, the navigation system will re- tification icon on page 130.
commend a new alternative route automati-
cally. In such a case, the following screen will 2 Display the map screen.
appear. The icon appears when the system acquires
traffic information on the current route.
1 2
2 Touch [OK].
The displayed route is set.
p When no selection is made, the screen re-
turns to the previous screen. After touching [Diversion], the route is recal-
culated taking all traffic jams on your current
route into account.
Checking traffic information p [Diversion] will be available only when the
manually system can find traffic jams.
Touching the notification icon on the map p Notification icon shows the nearest traffic
screen allows you to check traffic information information on the route. However, if you
on your route while the icon is displayed. The touch [Diversion], the route is recalculated
notification icon is only displayed on the navi- by taking into account not only this infor-
gation map screen if there is any traffic infor- mation, but also all traffic jam information
mation on your route. on the route.
Engb 51
Chapter
2 Touch [Traffic].
The “Traffic Menu” screen appears.
52 Engb
Chapter
Engb 53
Chapter
5 Wait until your Bluetooth device ap- The system searches for devices featuring Blue-
pears in the list. tooth technology that are waiting for the connec-
tion and displays them in the list if a device is
found.
4 Touch [Registration].
The “Nearby Device List” screen appears.
54 Engb
Chapter
Engb 55
Chapter
8 Touch the Bluetooth device name you 1 Display the “Settings Menu” screen.
want to register. = For details of the operations, refer to Screen
switching overview on page 20.
3 Touch [Registration].
A message prompting you to delete a regis-
tered device appears.
4 Touch [OK].
56 Engb
Chapter
! You want to reconnect a disconnected You can select the following profiles:
Bluetooth device. ! Handsfree and Audio:
! Connection cannot be established automa- Connects the device as the hands-free
tically for some reason. phone and the Bluetooth audio player.
If you start connection manually, carry out the ! Audio:
following procedure. You can also connect the Connects the device as Bluetooth audio
Bluetooth device by having the navigation sys- player.
tem detect it automatically. ! Handsfree:
Connects the device as the hands-free
1 Activate the Bluetooth wireless tech- phone.
nology on your devices. Connection starts.
For some Bluetooth devices, no specific action When a connection is successfully estab-
is necessary to activate Bluetooth wireless lished, a connection complete message ap-
technology. For details, refer to the instruction pears and the map screen returns by touching
manual of your devices. [OK].
p To cancel the connection to your device,
2 Display the “Settings Menu” screen.
touch [Cancel].
= For details of the operations, refer to Screen
p If connection fails, check whether your de-
switching overview on page 20.
vice is waiting for a connection and then
3 Touch [Bluetooth Settings]. retry.
The “Bluetooth Settings” screen appears.
Engb 57
Chapter
58 Engb
Chapter
Making a call home easily 4 Switch the page of the list to display
You can call home without taking the time to the desired entry.
enter the phone number if the phone number
has been registered.
1 Display the “Phone Menu” screen.
= For details, refer to Displaying the Phone
Menu on the previous page.
Engb 59
Chapter
60 Engb
Chapter
Engb 61
Chapter
62 Engb
Chapter
Engb 63
Chapter
64 Engb
Chapter
It clears all the data that correspond to the con- Notes for hands-free phoning
nected mobile phone.
General notes
4 Touch [Yes]. ! Connection to all mobile phones featuring
Data on the selected item is cleared from this Bluetooth wireless technology is not guar-
navigation system’s memory. anteed.
p If you do not want to clear the memory that ! The line-of-sight distance between this na-
you have selected, touch [No]. vigation system and your mobile phone
must be 10 metres or less when sending
and receiving voice and data via Bluetooth
Updating the Bluetooth technology. However, the actual transmis-
wireless technology software sion distance may be shorter than the esti-
Update files will be available for download in mated distance, depending on the usage
the future. You will be able to download the lat- environment.
est update from an appropriate website to ! With some mobile phones, the ring sound
your PC. may not be output from the speakers.
p Before you download the files and install ! If private mode is selected on the mobile
the update, read through the instructions phone, hands-free phoning may be dis-
on the website. Follow the instructions on abled.
the website for steps until [Firmware up-
Registration and connection
date] becomes active.
! Mobile phone operations vary depending
1 Insert an SD memory card into the SD on the type of mobile phone. Refer to the
card slot. instruction manual that came with your
mobile phone for detailed instructions.
Engb 65
Chapter
66 Engb
Chapter
This chapter describes the basic operations of 2 Tap the icon of the source you want to
Selecting a source
Source icon
Engb 67
Chapter
Selecting an item
1 Scroll by dragging items up or down,
and display the item you want to select.
68 Engb
Chapter
You can listen to the radio by using the naviga- 4 Signal level indicator
tion system. This section describes operations 5 Frequency indicator
for radio (FM). 6 STEREO indicator
b
e
c
1 Source icon
Shows which source has been selected.
2 Band indicator
Shows which band the radio is tuned to: FM1
to FM3.
3 Programme service name indicator
Shows the programme service name (station
name) of the current station.
Engb 69
Chapter
7
2
5 4 3
70 Engb
Chapter
1 Select a frequency that you want to Viewing the three latest radio text
store in memory. You can display the currently received radio
text and the three most recent radio text trans-
2 Display the preset channel list.
missions.
= For details, refer to Switches between the
AV operation screen and the preset list 1 Display the radio text screen.
display on the previous page. = For details, refer to Displays radio text
screen on the previous page.
3 Keep touching a preset tuning key [P1]
to [P6]. 2 Press the TRK (c/d) button.
Preset list display Pressing the buttons switches the text con-
tents from the current radio text to the most re-
cent three radio text transmissions.
Engb 71
Chapter
2 Touch and hold any of the keys [1] to “P6” and, once stored there, you can tune in to
[6] to store the displayed radio text. these frequencies with the touch of a key.
The selected radio text is stored in memory.
The next time you press the same keys in the 1 Touch on the “FM” screen.
radio text display, the stored text is recalled
2 Touch [BSM].
from memory.
p If the radio text data is already stored under 3 Touch [Start] to begin a search.
all keys, the new text will overwrite the exist- BSM begins to flash. While “BSM” is flashing,
ing one. the six strongest broadcast frequencies will be
stored under the preset tuning keys “P1” to
“P6” in order of their signal strength. When
Using the “Function” menu this is complete, “BSM” stops flashing.
p To cancel the storage process, touch
% Touch on the “FM” screen. [Stop].
The “Function” menu appears. p Storing broadcast frequencies with BSM
1 2 3 4 may replace broadcast frequencies you
have already saved.
72 Engb
Chapter
Limiting stations to regional displayed for about two seconds and then
programming the tuner returns to the original station.
Engb 73
Chapter
PI Seek operation
If the unit fails to find a suitable alternative fre-
quency, or if you are listening to a broadcast
and the reception becomes weak, the naviga-
tion system will automatically search for a dif-
ferent station with the same programming.
During the search, “PI Seek” is displayed and
the output is muted. Muting is discontinued
after completion of the PI Seek, whether or not
a different station is found.
74 Engb
Chapter
Indicator Meaning
Information interruption is acti-
vated, but you will not receive data
since there is none.
NEWS indicator
Indicator Meaning
Information interruption is acti-
vated, but you will not receive data
since there is none.
Engb 75
Chapter
PTY list
General Specific Type of programme
NEWS&INF News News
Affairs Current affairs
Sport Sports
Weather Weather reports/meteorological information
Finance Stock market reports, commerce, trading, etc.
Jazz Jazz
Country Country music
Nat Mus National music
Children Children’s
Phone In Phone In
Touring Travel programmes, not for announcements about traffic problems
76 Engb
Chapter
7
8
1 Source icon
Shows which source has been selected.
2 Signal level indicator
3 Frequency indicator
4 NEWS indicator
Shows the status of news programmes.
5 TRFC indicator
Shows the status of traffic announcements.
6 Current time
7 Frequency indicator
Shows the frequency of the preset item.
8 Preset number indicator
Shows what preset item has been selected.
Engb 77
Chapter
2
5
4 3
78 Engb
Chapter
2 Touch [BSM].
Engb 79
Chapter
80 Engb
Chapter
6 5
Engb 81
Chapter
82 Engb
Chapter
2 Insert the disc you want to play into Does not play tracks in ran-
disc-loading slot. dom order.
Playback starts from the first file of the ROM. Plays all audio files in the cur-
= For details of the operation, refer to Insert- rent repeat play range in ran-
ing and ejecting a disc on page 13. dom order.
p If the disc is already set, tap [Disc] on the
! Setting a repeat play range
left edge of the screen.
= For details, refer to Selecting a source on Indicator: Meaning
page 67.
Repeats all compressed
3 Use the touch panel keys on the screen audio files.
to control the disc. Repeats just the current file.
= For details concerning operations, refer to
Repeats the current folder.
Using the touch panel keys on page 85.
2 Current file information
! : Folder name
Reading the screen Shows the folder name currently play-
ing.
1 2 34
! : Artist name
5 Shows the artist name currently playing
7 (when available).
! : Album title
6 Shows the title of the album for the cur-
rent file (when available).
! : Track title
Shows the title of the track currently
playing (when available).
1 Playback condition indicator p If the title of a track is not available,
Indicates the current playback condition. the file name appears.
! Scanning folders and files ! Play time
Shows the elapsed playing time within
the current file.
Engb 83
Chapter
84 Engb
Chapter
6 5
1 Scans folders and files = For details, refer to Using the equaliser
Scan play is performed by touching only one on page 148.
key. 6 Displays the “Function” menu
= For details of the operation, refer to = For details, refer to Using the
Scans folders and files on the next “Function” menu on the next page.
page. 7 Playback and Pause
2 Plays files in random order Touching [f] switches between playback
The files in the current repeat play range can and pause.
be played at random by touching only one key. 8 Selects a file from the list
p If the disc contains a mixture of various Touching the key displays the list which lets
media file types, all tracks or files within you see the list of track titles or folder names
the current part (“CD” or “ROM”) are on a disc.
played randomly. p If the title of a track is not available, the
= For details, refer to Plays files in ran- file name appears.
dom order on the next page. Tapping a folder on the list shows its content.
3 Sets a repeat play range You can play a file on the list by tapping it.
The repeat play range can be changed by
touching only one key.
= For details, refer to Changes the repeat
range on the next page.
4 Selects a file to play
Scrolling the keys up or down displays files,
and tapping a file starts playback.
Tapping the lower key during random play-
back skips to the next file. Tapping the upper
= For details, refer to Operating list screens
key jumps to the start of the current file.
(e.g. iPod list screen) on page 67.
5 Recalls equaliser curves
Engb 85
Chapter
Touching displays the content of the upper rently playing data session even if “Disc”
folder (parent folder). If the uppermost folder is selected.
is listed, cannot be used. 2 Plays files in random order
9 Switches the media file type played Each touch of [Random] turns it on or off.
When playing a disc containing a mixture of When the random play is turned on, the
various media file types, you can switch be- files in the current repeat play range are
tween media file types to play. randomly played.
Tap the key repeatedly to switch between the p If you turn the random play on when the
following media file types: repeat play range is set to “Track”, the
CD (audio data (CD-DA)) — ROM (com- repeat play range changes to “Folder”
pressed audio file) — DivX (DivX video automatically.
files) 3 Scans folders and files
Scan play lets you hear the first 10 seconds
of each file. Scan play is performed in the
Using the “Function” menu current repeat play range.
Each touch of [Scan] turns it on or off.
% Touch on the “ROM” screen. When you find the track you want, touch
The “Function” menu appears. [Scan] to turn the scan play off.
1 2 3 4 p After completion of file or folder scan-
ning, normal playback of the files will
begin again.
p If you turn the scan play on when the re-
peat play range is set to “Track”, the re-
peat play range changes to “Folder”
automatically.
p If you turn the scan play on while the re-
peat play range is set to “Disc”, scan
play is performed for only the first tracks
1 Changes the repeat range
of each folder.
Each touch of [Repeat] changes the setting
4 Uses “Sound Retriever” function
as follows:
“Sound Retriever” function automatically
! Disc: Repeats all compressed audio
enhances compressed audio and restores
files.
rich sound.
! Track: Repeats just the current file.
Each touch of [Sound Retriever] changes
! Folder: Repeats the current folder.
the setting as follows:
p If you select another folder during repeat
! MODE 1: Activates “Sound Retriever”
play, the repeat play range changes to
function.
“Disc”.
! MODE 2: Activates “Sound Retriever”
p If you perform fast reverse or fast for-
function.
ward during “Track”, the repeat play
! Off: Deactivates “Sound Retriever”
range changes to “Folder”.
function.
p When “Folder” is selected, it is not pos-
p MODE 2 has a stronger effect than
sible to playback a subfolder of that
MODE 1 and is more effective when
folder.
playing back highly compressed audio
p When playing discs with compressed
data.
audio files and audio data (CD-DA), re-
peat play is performed within the cur-
86 Engb
Chapter
Playing a DVD-Video 18
You can play a DVD-Video using the built-in Shows the current audio channel type, such
drive of the navigation system. This section de- as “Mch” (Multi-channel).
scribes operations for playing a DVD-Video. 5 Subtitle number indicator
Shows the subtitle number currently selected.
6 Subtitle language indicator
Starting procedure Shows the subtitle language currently se-
lected.
1 Display the AV operation screen. 7 NEWS indicator
= For details of the operations, refer to Dis- Shows the status of news programmes.
playing the AV operation screen on page 67. 8 TRFC indicator
2 Insert the disc you want to play into Shows the status of traffic announcements.
9
Playing a DVD-Video
disc-loading slot. Viewing angle indicator
The source changes and then playback will Shows what viewing angle has been selected.
start. a Current time
= For details of the operation, refer to Insert- b Digital sound format indicator
ing and ejecting a disc on page 13. Shows which digital sound format (surround
p If the disc is already set, tap [Disc] on the sound format) has been selected.
left edge of the screen. c Play time indicator
= For details, refer to Selecting a source on Shows the elapsed playing time within the
page 67. current title.
d Source icon
3 Use the touch panel keys on the screen Shows which source has been selected.
to control the disc.
= For details, refer to Using the touch panel
keys on the next page.
b
d
Engb 87
Chapter
18 Playing a DVD-Video
b a 9 8 7 6 5 4
c
d
g f j i h
p With some discs, the icon 9 may be dis- Touching [Hide] shows only the current video.
played, meaning that the operation is inva- To display the touch panel keys and informa-
lid. tion of the current video, touch the screen.
1 Resumes playback (Bookmark) 5 Skips forward or backward
= For details, refer to Resuming playback Touching [p] skips to the start of the next
(Bookmark) on the next page. chapter. Touching [o] once skips to the
2 Displays the DVD menu start of the current chapter. Touching it twice
You can display the menu by touching [Menu] quickly will skip to the previous chapter.
or [Top Menu] while a disc is playing. Touch- p You can also perform these operations
ing either of these keys again lets you start by using the TRK button.
playback from the location selected from the 6 Playback and Pause
menu. For details, refer to the instructions pro- Touching [f] switches between playback
vided with the disc. and pause.
3 Stops playback 7 Displays the DVD menu keypad
4 Hides the touch panel keys and informa- = For details, refer to Using DVD menu by
tion of the current video touch panel keys on page 90.
88 Engb
Chapter
Playing a DVD-Video 18
8 Switches to the next page of touch panel p During playback of a scene shot from
keys multiple angles, the angle icon is
9 Switches the display displayed. Turn the angle icon display
Touching [Disp] changes the indication on the on or off using the “DVD/DivX® Setup”
information plate as follows: menu.
Disc information display — Repeat range and = For details, refer to Setting the angle icon
L/R select display display on page 97.
a Recalls equaliser curves i Changes the subtitle (Multi-subtitle)
= For details, refer to Using the equaliser Each touch of [S.Title] switches between the
on page 148. subtitle languages recorded on the disc.
b Displays the “Function” menu j Changes the audio track (Multi-audio)
Playing a DVD-Video
= For details, refer to Using the Each touch of [Audio] switches between
“Function” menu on page 91. audio tracks recorded in the disc.
c Searches for a desired scene and starts p DTS audio format cannot be output, so
playback from a specified time select an audio track other than DTS
= For details, refer to Searching for a speci- audio format.
fic scene and starting playback from a p Display indications such as MPEG-A
specified time on the next page. and Mch describe the audio track re-
d Performs an operation (such as resuming) corded on the DVD. This indication may
that is stored on the disc not be the same as the actual sound
When using a DVD that has a point recorded currently output from the navigation sys-
that indicates where to return to, the DVD re- tem.
turns to the specified point and begins play-
back from that point.
e Skips the title forward or backward Resuming playback (Bookmark)
Touching [d] skips to the start of the next title. The Bookmark function lets you resume play-
Touching [c] skips to the start of the previous back from a selected scene the next time the
title. disc is loaded.
f Fast reverse or forward
Touch [m] or [n] to perform fast reverse or % Touch [BookM.].
forward.
If you touch and hold [m] or [n] for five
seconds, fast reverse/fast forward continues
even if you release either of these keys. To re-
sume playback at a desired point, touch
[f], [m] or [n] opposite to key pushed
for five seconds.
g Frame-by-frame playback (or slow-motion
playback) You can bookmark one point for each of up to
= For details, refer to Frame-by-frame play- five discs. If you try to memorise another point
back on page 91. for the same disc, the oldest bookmark will be
= For details, refer to Slow motion playback overwritten by the newer one.
on page 91. p To clear the bookmark on a disc, touch and
h Changes the viewing angle (Multi-angle) hold [BookM.].
Each touch of [Angle] switches between view-
ing angles.
Engb 89
Chapter
18 Playing a DVD-Video
Searching for a specific scene 3 Touch [0] to [9] to input the desired
and starting playback from a number.
specified time 4 While the input number is displayed,
You can search for the scene you want by spe- touch [Enter].
cifying a title or a chapter, and the time.
p Chapter search and time search are not
available when disc playback has been Operating the DVD menu
stopped. You can operate the DVD menu by touching
the menu item on the screen directly.
1 Touch [Search] and then touch [Title] p This function can be used when the
(title), [Chapter] (chapter), [Time] (time). key is displayed on the lower right corner of
the LCD screen.
2 Touch the keys to input the target num-
p This function may not work properly with
ber or time and then touch [Enter].
some DVD disc content. In that case, use
touch panel keys to operate the DVD menu.
p If you touch the screen while is dis-
played, the touch panel keys will not be dis-
played.
1 Touch [Search].
2 Touch [10Key].
90 Engb
Chapter
Playing a DVD-Video 18
1 Touch [a], [b], [c] or [d] to select the p To return to normal playback, touch [f].
desired menu item.
2 Touch [q] or [r] to adjust playback
speed during slow motion playback.
Each time you touch [q] or [r] it changes
the speed in four steps in the following order:
1/16 f 1/8 f 1/4 f 1/2
p There is no sound during slow motion play-
back.
p With some discs, images may be unclear
during slow motion playback.
p If the touch panel keys for DVD menu selec-
p Reversed slow motion playback is not possi-
Playing a DVD-Video
tion disappear, touching anywhere on the
ble.
screen, then touching displays them
again.
Engb 91
Chapter
18 Playing a DVD-Video
92 Engb
Chapter
You can play a DivX disc using the built-in 4 Audio channel indicator
drive of the navigation system. This section de- Shows the current audio channel type, such
scribes those operations. as “Mch” (Multi-channel).
5 Subtitle number indicator
Shows the subtitle number currently selected.
Starting procedure 6 NEWS indicator
Shows the status of news programmes.
1 Display the AV operation screen. 7 TRFC indicator
= For details of the operations, refer to Dis- Shows the status of traffic announcements.
playing the AV operation screen on page 67. 8 Repeat range indicator
Shows which repeat range has been selected.
2 Insert the disc you want to play into
= For details, refer to Changes the repeat
disc-loading slot.
range on page 96.
The source changes and then playback will
a
c
Engb 93
Chapter
9 8 7 6 5 4 3
b
c
d
f e
p With some discs, the icon 9 may be dis- Tapping a folder on the list shows its content.
played, meaning that the operation is inva- You can play a file on the list by tapping it.
lid.
1 Selects a file from the list
Touching the key displays the list which lets
you see the list of file names or folder names
on a disc.
p A dash (–) is displayed if there is no cor-
responding information.
94 Engb
Chapter
Touching displays the content of the upper d Changes the subtitle (Multi-subtitle)
folder (parent folder). If the uppermost folder Each touch of [S.Title] switches between the
is listed, cannot be used. subtitle languages recorded on the disc.
2 Stops playback e Fast reverse or forward
3 Hides the touch panel keys and informa- Touch [m] or [n] to perform fast reverse or
tion of the current video forward.
Touching [Hide] shows only the current video. If you touch and hold [m] or [n] for five
To display the touch panel keys and informa- seconds, fast reverse/fast forward continues
tion of the current video, touch the screen. even if you release either of these keys. To re-
4 Skips forward or backward sume playback at a desired point, touch
Touching [p] skips to the start of the next [f], [m] or [n] opposite to key pushed
file. Touching [o] once skips to the start of for five seconds.
the current file. Touching it twice quickly will f Frame-by-frame playback (or slow-motion
Engb 95
Chapter
96 Engb
Chapter
This chapter describes how to configure the 2 Touch [Subtitle Language], [Audio Lan-
DVD-Video/DivX player. guage] or [Menu Language].
Each language menu is displayed and the cur-
rently set language is selected.
Displaying DVD/DivX® Setup 3 Touch the desired language.
menu When you select “Others”, a language code
1 Play the disc that contains DVD-Video input display is shown. Input the four-digit
or DivX. code of the desired language then touch
[Enter].
2 Display the AV operation screen. = For details, refer to Language code chart for
= For details of the operations, refer to Dis- DVDs on page 100.
playing the AV operation screen on page 67. p If the selected language is not recorded on
the disc, the default language specified on
3 Touch . the disc is output and displayed.
The “Function” menu appears. p You can also switch the subtitle and audio
Engb 97
Chapter
p When using a regular display, select either 1 Display the “DVD/DivX® Setup” screen.
“Letter Box” or “Panscan”. Selecting = For details, refer to Displaying DVD/DivX®
“16:9” may result in an unnatural picture. Setup menu on the previous page.
98 Engb
Chapter
Setting the auto play p The DivX subtitles will be displayed even
when the subtitle file setting is on if no cor-
When a DVD disc with DVD menu is inserted, responding subtitle files exist.
this unit will cancel the DVD menu automati- p Up to three lines can be displayed at
cally and start playback from the first chapter once.
of the first title.
p This function is available for DVD-Video.
p Some DVDs may not operate properly. If
this function is not fully operable, turn this
function off and start playback.
Engb 99
Chapter
100 Engb
Chapter
You can play the compressed audio files Reading the screen
stored in the external storage device (USB,
SD). 1 2 34
p In the following description, the SD mem- 5
ory card and USB memory device are col-
7
lectively referred to as the “external storage
device (USB, SD)”. If it indicates the USB 6
memory device only, it is referred to as the
“USB storage device”.
4 Use the touch panel keys on the screen ! Playing files in random order
to control the external storage device
Indicator: Meaning
(USB, SD).
= For details, refer to Using the touch panel Does not play files in random
keys (Music) on page 103. order.
Engb 101
Chapter
Indicator: Meaning
Repeats all compressed
audio files in the selected ex-
ternal storage device (USB,
SD).
102 Engb
Chapter
8 4
Engb 103
Chapter
Tapping this key switches between the screen Each touch of [Scan] turns it on or off.
to operate music files and the screen to oper- When you find the track you want, touch
ate video files. This touch panel key is avail- [Scan] to turn the scan play off.
able only when there are both audio and video p After all files or folders scanning are fin-
files in the external storage device (USB, ished, normal playback will begin again.
SD). p If you turn the scan play on when the re-
peat play range is set to “Track”, the re-
peat play range changes to “Folder”
Using the “Function” menu automatically.
104 Engb
Chapter
You can play the video files stored in the exter- Reading the screen
nal storage device (USB, SD).
p In the following description, the SD mem- 123 4 56 7
ory card and USB memory device are col-
lectively referred to as the “external storage 8
a
device (USB, SD)”. If it indicates the USB
memory device only, it is referred to as the
“USB storage device”.
Starting procedure 9
1 Display the AV operation screen.
p This unit may not achieve optimum perfor-
= For details of the operations, refer to Dis-
mance with some external storage devices.
playing the AV operation screen on page 67.
p You can playback the files on a USB sto-
2 Insert the SD memory card into the SD rage device compliant with Mass Storage
card slot or plug the USB storage device Class. For details about the USB Class,
into the USB connector. refer to the manual supplied with the USB
= For details, refer to Plugging in a USB sto- storage device.
Engb 105
Chapter
8 7 6 5 4
1 Stops playback p There is no sound on fast reverse or for-
2 Selects a file from the list ward.
You can select and play the title you want from p You can also perform these operations
the list. by using the TRK button.
4 Hides the touch panel keys and informa-
tion of the current video
Touching [Hide] shows only the current video.
To display the touch panel keys and informa-
tion of the current video, touch the screen.
5 Playback and Pause
Touching [f] switches between playback
and pause.
= For details, refer to Operating list screens 6 Searches for a desired scene and starts
(e.g. iPod list screen) on page 67. playback from a specified time
The contents of the folder in which the cur- = For details, refer to Searching for a speci-
rently playing file is located are displayed. fic scene and starting playback from a
Touching displays the content of the upper specified time on the next page.
folder (parent folder). If the uppermost folder 7 Recalls equaliser curves
is listed, cannot be used. = For details, refer to Using the equaliser
3 Skips forward or backward on page 148.
Touching [p] skips to the start of the next 8 Displays the “Function” menu
file. Touching [o] once skips to the start of = For details, refer to Using the
the current file. Touching it twice quickly will “Function” menu on the next page.
skip to the previous file. 9 Switches the operation screen
Fast reverse or forward
Touch and hold [o] or [p] to fast reverse
or fast forward.
106 Engb
Chapter
1 Touch [Search].
2 Touch the keys to input the target num- 1 Changes the repeat range
ber or time and then touch [Enter]. Each touch of [Repeat] changes the setting
as follows:
! Media: Repeats all video files in the se-
lected external storage device (USB,
Engb 107
Chapter
Starting procedure
1 Display the AV operation screen.
= For details of the operations, refer to Dis- 3
playing the AV operation screen on page 67.
1 Playback condition indicator
2 Connect your iPod. Indicates the current playback condition.
The source changes and then playback will ! Setting the shuffle play for music
start.
= For details, refer to Connecting your iPod on Indicator: Meaning
page 18. Cancels the shuffle play.
p If the iPod is already connected, tap [iPod]
Plays back songs in random
on the left edge of the screen. order within the selected list.
= For details, refer to Selecting a source on
Selects an album randomly,
page 67.
and then plays back all songs
p No video is output if iPod is selected as AV in that album in order.
source, check the setting in “AV1 Input” on
the “AV System Settings” menu. ! Setting a repeat play range
= For details, refer to Setting video input 1
(AV1) on page 144. Indicator: Meaning
Repeats all songs in the se-
3 Use the touch panel keys on the screen lected list.
to control your iPod.
Repeats just the current
= For details of the operation, refer to Using
song.
the touch panel keys on page 110.
2 Current song (episode) information
! : Artist name (podcast title)
Reading the screen Shows the artist name currently playing.
Music
When a podcast is played, the podcast
title is displayed.
1 2 45
! : Album title (release date)
6 Shows the title of the album for the
9 song. When a podcast is played, the re-
lease date is displayed.
7 ! : Song title (episode)
Shows the title of the current song.
When a podcast is played, the episode
is displayed.
8 ! : Chapter number
108 Engb
Chapter
Engb 109
Chapter
d
c
b 4
8 7 6 5
Video
8 7 g 9 f
1 Sets the shuffle play for music = For details, refer to Sets repeat play on
The shuffle play setting can be changed by page 114.
touching only one key. 3 Plays a playlist using MusicSphere
= For details, refer to Sets the shuffle Touching the key displays the MusicSphere
play for music on page 114. screen, and a playlist created with the PC ap-
2 Sets a repeat play range plication (MusicSphere) can be played.
The repeat play range can be changed by = For details, refer to Playing Music-
touching only one key. Sphere on page 114.
110 Engb
Chapter
Engb 111
Chapter
112 Engb
Chapter
Engb 113
Chapter
114 Engb
Chapter
Engb 115
Chapter
116 Engb
Chapter
Engb 117
Chapter
6 5 4
1 Plays files in random order = For details, refer to Using the equaliser
All of the files within the repeat play range on page 148.
can be played at random by touching only one 6 Displays the “Function” menu
key. = For details, refer to Using the
p This function is available only when the “Function” menu on this page.
connected Bluetooth audio player fea-
tures AVRCP 1.3.
= For details, refer to Plays files in ran- Using the “Function” menu
dom order on the next page.
2 Sets a repeat play range p This menu is available only when the con-
The repeat play range can be changed by nected Bluetooth audio player features
touching only one key. AVRCP 1.3.
p This function is available only when the % Touch on the “Audio” screen.
connected Bluetooth audio player fea- The “Function” menu appears.
tures AVRCP 1.3.
= For details, refer to Changes the repeat 1 2
range on this page.
3 Playback and Pause
Touching [d] or [e] switches between play-
back and pause.
4 Connects the Bluetooth audio player
Touching [Connect] displays the connection
standby screen and the navigation system
waits for the Bluetooth wireless connection re-
quest. 1 Changes the repeat range
5 Recalls equaliser curves Each touch of [Repeat] changes the setting
as follows:
118 Engb
Chapter
Engb 119
Chapter
25 Using AV input
You can display the video image output by the 3 Tap [AV1] on the left edge of the
equipment connected to the navigation sys- screen.
tem. For details of the connection method, The image is displayed on the screen.
refer to Installation Manual.
4 Touch the screen to display the touch
panel keys.
CAUTION
For safety reasons, video images cannot be
viewed while your vehicle is in motion. To view
video images, you must stop in a safe place and
Using AV2
apply the handbrake. You can display the video image output by the
equipment connected to video input 2.
Using AV1
You can display the video image output by the
equipment connected to video input 1.
120 Engb
Chapter
Starting procedure
1 Display the AV operation screen.
= For details of the operations, refer to Dis-
playing the AV operation screen on page 67.
Engb 121
Chapter
6 5 4
1 Sends a 1 key to 6 key command The external unit can be operated by transmit-
The external unit can be operated by transmit- ting the operating commands set to F1
ting the operating commands set to 1 key through F4.
through 6 key. p The operating commands set to F1
p Operation varies depending on the ex- through F4 vary depending on the exter-
ternal unit connected. (In some cases, nal unit.
some functions may not be used until p Some functions may not be used until
you touch and hold the key.) you touch and hold the key.
2 Sends a command [a], [b], [c], or [d] 5 Sends a band command
Touch to operate the external unit. Touch to send a band command to the exter-
p Operation varies depending on the ex- nal unit.
ternal unit connected. (In some cases, p Operation varies depending on the ex-
some functions may not be used until ternal unit connected. (In some cases,
you touch and hold the key.) the external unit may not respond.)
3 Switches between automatic and manual 6 Recalls equaliser curves
function = For details, refer to Using the equaliser
You can turn automatic and manual function on page 148.
on or off.
You can switch between Auto and Manual
functions of the external unit connected.
Initially, this function is set to Auto.
p Operating commands set for Auto and
Manual operations vary depending on
the external unit connected.
4 Uses F1 through F4 to operate the external
unit
122 Engb
Chapter
Customising preferences 27
Customising preferences
3
2 Touch [Settings]. 4
The “Settings Menu” screen appears. 5
p This can also be operated using the “Short-
cut Menu” screen.
Engb 123
Chapter
27 Customising preferences
When the gear lever is shifted to “R”, the Indicates the degree of slope of the street
signal switches to “High” or “Low”. (One of that you are currently on.
these is displayed depending on the 7 Degree of learning
vehicle.) Sensor learning situations for distance
(Distance), right turn (Right Turn), left turn
(Left Turn) and 3D detection (3D Detec-
Checking sensor learning tion) are indicated by the length of bars.
p When tyres have been changed or
status and driving status chains fitted, turning on the Speed
p The navigation system can automatically Pulse allows the system to detect the
use its sensor memory based on the outer fact that the tyre diameter has changed,
dimensions of the tyres. and automatically replaces the value for
calculating distance.
1 Display the “Navi Settings” screen. p If a separately sold speed pulse genera-
= For details, refer to Displaying the “Navi tor (ND-PG1) is connected, the distance
Settings” screen on the previous page. calculation value cannot be replaced
automatically.
2 Touch [3D Calibration Status].
The “3D Calibration Status” screen appears.
6
Clearing status
1 You can delete the learned results stored in
7 [Distance], [Speed Pulse] or [Learning Sta-
2
3
tus].
4
1 Touch [Distance] or [Speed Pulse].
5
The following message appears.
1 Speed
Indicates the speed detected by the naviga-
tion system. (This indication may be differ-
ent from the actual speed of your vehicle,
so please do not use this instead of the
speedometer.)
2 Acceleration or deceleration/Rotational
speed
2 Touch [Yes].
Indicates acceleration or deceleration velo-
Clears the results stored in [Distance] or
city of your vehicle. Also, rotational speed
[Speed Pulse].
when your vehicle turns to left or right is
shown. 3 Touch [Learning Status].
3 Distance The following message appears.
Indicates driving distance.
4 Speed Pulse
Indicates the total number of speed pulses.
5 Learning Status
Indicates the current driving mode.
6 Inclination
124 Engb
Chapter
Customising preferences 27
Customising preferences
4 Touch [All].
Clears all learning statuses.
p Touch [All] for the following cases: Enter the following items:
! After changing the installation position ! Surface Road Fuel Mileage:
of the navigation system Enter the fuel cost when you drive on ordin-
! After changing the installation angle of ary roads.
the navigation system p How the fuel cost is entered depends on
! After moving the navigation system to the “Fuel Unit” setting.
another vehicle — When “Fuel Unit” is set to “Litre”.
# Touch [Distance]. Enter how much fuel you need to tra-
Clears the learned results stored in [Distance]. vel 100 kilometres (60 miles).
p When the distance accuracy is low, touch — When “Fuel Unit” is set to “Gallon”.
[Distance]. Enter how many kilometres (miles)
you get to a gallon.
! Motorway Fuel Mileage:
Using the “Fuel cons.” function Enter the fuel cost when you drive on the
motorway.
Inputting the fuel consumption p How the fuel cost is entered depends on
information for calculating the the “Fuel Unit” setting.
fuel cost — When “Fuel Unit” is set to “Litre”.
Enter how much fuel you need to tra-
You can estimate the fuel cost to your destina-
vel 100 kilometres (60 miles).
tion by entering the fuel consumption informa-
— When “Fuel Unit” is set to “Gallon”.
tion in the navigation system.
Enter how many kilometres (miles)
= For details, refer to Setting a route to your
you get to a gallon.
destination on page 40.
! Fuel Price Per Unit:
1 Display the “Navi Settings” screen. Enter the fuel unit price.
= For details, refer to Displaying the “Navi ! Fuel Unit:
Settings” screen on page 123. Set the fuel unit.
! Currency:
2 Touch [Fuel cons.]. Set the unit of currency.
The “Fuel Mileage Setting” screen appears. When all the items are entered, inputting the
fuel consumption information is complete.
Engb 125
Chapter
27 Customising preferences
126 Engb
Chapter
Customising preferences 27
Customising preferences
! Business:
Changes the track log attribute to “Busi-
ness”.
! Other:
Changes the track log attribute to
After a message confirming whether to export “Other”.
the data appeared, exporting the data to the
SD memory card starts.
The “Fuel Mileage Setting” screen appears Using the demonstration
when it is done.
guidance
This is a demonstration function for retail
Recording your travel history stores. After a route is set, touching this key
starts the simulation of route guidance.
Activating the track logger enables you to re-
cord your driving history (called “track log” 1 Display the “Navi Settings” screen.
below). You can review the travel history later. = For details, refer to Displaying the “Navi
p If an SD memory card is inserted into the Settings” screen on page 123.
SD card slot, the track logs will be stored in
the SD memory card. 2 Touch [Demo Mode].
Each time you touch the key changes that set-
1 Insert an SD memory card into the SD ting.
card slot. ! On:
= For details of the operation, refer to Insert- Repeats demo drive.
ing and ejecting an SD memory card on ! Off (default):
page 15. Demo Mode is set off.
2 Display the “Navi Settings” screen. 3 Display the map screen.
= For details, refer to Displaying the “Navi The demonstration guidance will begin.
Settings” screen on page 123.
3 Touch [Drive Log Settings].
The “Drive Log Settings” screen appears. Registering your home
Registering your home position saves time
4 Touch [Drive Log Settings].
and effort. Also, routes to home positions can
Each time you touch the key changes that set-
be calculated easily with a single touch of the
ting.
key from the “Destination Menu”. The regis-
! On:
tered home position can also be modified
You can export your track log to the SD
later.
memory card.
! Off (default): 1 Display the “Navi Settings” screen.
You cannot export your track log to the SD = For details, refer to Displaying the “Navi
memory card. Settings” screen on page 123.
p While the setting is “On”, the navigation
system continues to store the track logs in 2 Touch [Set Home].
the inserted SD memory card. The “Set Home” screen appears.
Engb 127
Chapter
27 Customising preferences
128 Engb
Chapter
Customising preferences 27
Customising preferences
2 Touch [Settings]. 3 Touch [Close Up View].
Each time you touch the key changes that set-
ting.
! On (default):
Switches to an enlarged map.
! Off:
Does not switch to an enlarged map.
# Touch .
Returns the previous screen.
Engb 129
Chapter
27 Customising preferences
130 Engb
Chapter
Customising preferences 27
Customising preferences
! View (default): ! View (default):
Displays the icons on the map. Displays the street name (or city name) on
! Hide: the map.
Hides the icons on the map. ! Hide:
Hides the street name (or city name) on the
map.
Displaying the Bluetooth
connection icon
Setting the “Favourites”
Selects whether to display or hide the icon for
current status of the phone connection via icon display
Bluetooth wireless technology. You can select whether to display the “Favour-
ites” icon on the map.
1 Display the “Map Settings” screen. p “Favourites” icons are displayed when the
= For details, refer to Displaying the “Map map scale is 20 kilometres (10 miles) or
Settings” screen on page 129. less.
2 Touch [Displayed Info]. = For details, refer to Editing the entry in the
The “Displayed Information” screen appears. “Favourites” list on page 45.
Engb 131
Chapter
27 Customising preferences
132 Engb
Chapter
Customising preferences 27
Customising preferences
1 Display the “Map Settings” screen.
= For details, refer to Displaying the “Map
Settings” screen on page 129.
Engb 133
Chapter
27 Customising preferences
1 Insert an SD memory card into the SD Setting the map colour change
card slot.
= For details of the operation, refer to Insert- between day and night
ing and ejecting an SD memory card on To improve the visibility of the map during the
page 15. evening, you can set the timing for changing
the combination of the map colour.
2 Display the “Map Settings” screen.
= For details, refer to Displaying the “Map 1 Display the “Map Settings” screen.
Settings” screen on page 129. = For details, refer to Displaying the “Map
Settings” screen on page 129.
3 Touch [Overlay POI].
The “Overlay POI” screen appears. 2 Touch [Day/Night Display].
Each time you touch the key changes that set-
4 Touch [Display] to change the setting to ting.
“On”. ! Automatic (default):
You can change the colours of a map be-
tween daytime and nighttime according to
whether the vehicle lights are on or off.
! Day:
The map is always displayed with daytime
colours.
p To use this function with “Automatic”, the
orange/white lead of the navigation system
p If you do not want to display the POI icon must be connected correctly.
on the map, touch [Display] to turn it
“Off”. (Even if “Display” is turned “Off”,
the POI selection setting is retained.) Changing the road colour
5 Touch [Custom POI]. You can set the road colour to bluish or red-
The list of POI categories appears. dish.
6 Touch the items you want to display. 1 Display the “Map Settings” screen.
= For details, refer to Displaying the “Map
Settings” screen on page 129.
134 Engb
Chapter
Customising preferences 27
Customising preferences
your vehicle approaches a guidance point Find POIs (Points Of Interest) in the vicinity
such as an intersection while displaying a of the cursor.
screen other than navigation. = For details, refer to Searching for a nearby
POI on page 36.
1 Display the “Map Settings” screen. ! : Overlay POI*
= For details, refer to Displaying the “Map Displays icons for surrounding facilities
Settings” screen on page 129. (POI) on the map.
= For details, refer to Displaying POI on the
2 Touch [AV Guide Mode].
map on page 132.
Each time you touch the key changes that set-
! : Volume*
ting.
Displays the “Volume Settings” screen.
! On (default):
= For details, refer to Setting the Volume
Switches from the AV operation screen to
for Guidance and Phone on page 138.
the map screen.
! : Contacts*
! Off:
Displays the “Contacts List” screen.
Does not switch the screen.
= For details, refer to Calling a number in
p This setting is effective only when “Close
the “Contacts List” on page 59.
Up View” is set to “On”.
! : Whole Route Overview
Displays the entire route (currently set) with
the “Route Overview” screen.
Selecting the “Quick Access” = For details, refer to Displaying the
menu “Route Overview” screen on page 41.
! : Traffic on Route
Select items to display on the map screen. In
Displays a list of traffic information on the
the list displayed on screen, the items with red
route.
tick marks are displayed on the map screen.
= For details, refer to Checking traffic infor-
Touch the item you want to display and then
mation on the route on page 50.
touch [OK] when a red check appears. You
! : Traffic List
can select up to five items.
Displays a list of traffic events information.
1 Display the “Map Settings” screen. = For details, refer to Checking all traffic in-
= For details, refer to Displaying the “Map formation on page 49.
Settings” screen on page 129. ! : Day/Night Display
Switches Day/Night Display setting.
2 Touch [Quick Access Selection]. = For details, refer to Setting the map col-
The “Quick Access Selection” screen appears. our change between day and night on
the previous page.
3 Touch the item that you want to set in ! : Favourites Icon
“Quick Access”. Switches Favourites Icon setting.
You can select the following items: = For details, refer to Setting the “Favour-
p Settings marked with an asterisk (*) show ites” icon display on page 131.
that these are default or factory settings.
! : Registration* 4 To finish the setting, touch [OK].
Engb 135
Chapter
27 Customising preferences
2 Touch [Settings].
The “Settings Menu” screen appears.
p This can also be operated using the “Short-
cut Menu” screen. Selecting the language
You can set the languages used on the pro-
3 Touch [System Settings].
gramme and voice guidance. Each language
can be set separately.
136 Engb
Chapter
Customising preferences 27
Customising preferences
the current TTS file with the latest one. Setting the time difference
p For AVIC-F20BT, the TTS file will be used on Adjusts the system’s clock. Set the time differ-
the guidance voice of voice recognition. ence (+, –) from the time originally set in your
navigation system.
1 Use your PC to copy the folder named
“Voice” onto the top-most directory of the 1 Display the “System Settings” screen.
SD memory card. = For details, refer to Displaying the “System
The “Voice” folder is stored on the supplied Settings” screen on the previous page.
CD-ROM. Use your PC to copy it.
2 Touch [Regional Settings].
2 Insert an SD memory card into the SD The “Regional Settings” screen appears.
card slot.
= For details of the operation, refer to Insert- 3 Touch [Time].
ing and ejecting an SD memory card on The “Time Settings” screen appears.
page 15.
4 To set the time difference, touch [+] or
3 Touch [Voice Language]. [–].
The “Voice Language Selection” screen ap-
pears.
Engb 137
Chapter
27 Customising preferences
138 Engb
Chapter
Customising preferences 27
This setting controls the guidance volume 1 Display the “System Settings” screen.
of navigation. = For details, refer to Displaying the “System
p When set to , guidance is output. Settings” screen on page 136.
When set to , no guidance is output.
! Phone Ringtone 2 Touch [Splash Screen].
The “Select Splash Screen” screen appears.
Customising preferences
This setting controls the incoming ring tone
volume.
3 Touch the image to use as the splash
! Phone Voice
screen from the list.
This setting controls the incoming voice vo-
The image is displayed on the screen.
lume.
p “Phone Ringtone” and “Phone Voice” ad- 4 Touch [OK].
justments are related to the mobile phone The image is set as the splash screen, and the
featuring Bluetooth technology. No adjust- “System Settings” screen returns.
ment is needed when the mobile phone fea-
turing Bluetooth technology is not
connected. Changing to the splash screen
p Volume of the AV source is adjusted by the stored in the SD memory card
VOL (+/–) button. You can change the splash screen that ap-
= For details, refer to Checking part names pears when the navigation system starts. Copy
and functions on page 11. your chosen image to the SD memory card,
# Touch the key next to “Beep”. and select the image to import.
Each time you touch the key changes that set- p Splash screen images should be used with-
ting. in the following formats;
! On (default): — BMP or JPEG files
A beep sounds. — Allowable horizontal and vertical size
! Off: are 2 592 pixels x 1 944 pixels or smaller
The beep sound is muted. — Allowable data size is 6 MB or smaller
# Touch the key next to “VR Beep”. p Proper compatibility with allowable files is
Each time you touch the key changes that set- not guaranteed.
ting. p Imported original images will be stored in
! On (default): the built-in memory, but the ability to save
Voice recognition beep is enabled. these images cannot be guaranteed com-
! Off: pletely. If your original image data is de-
Voice recognition beep is disabled. leted, insert the SD memory card again
p This function is available for AVIC-F20BT and re-import the original image.
only. p The maximum number of images, includ-
ing the images in the built-in memory, that
4 To finish the setting, touch [OK].
can be imported and displayed on the list is
200.
Changing the preinstalled
1 Create a folder named “Pictures” on the
splash screen top-most directory of the SD memory card
You can change the splash screen to the other and store the picture files in this folder.
images preinstalled in the navigation system.
2 Store the picture files in the “Pictures”
folder.
Engb 139
Chapter
27 Customising preferences
3 Insert an SD memory card into the SD that a portion of what is seen by the camera is
card slot. not viewable.
= For details of the operation, refer to Insert- = For details, refer to Setting for rear view
ing and ejecting an SD memory card on camera on this page.
page 15.
140 Engb
Chapter
Customising preferences 27
Customising preferences
screen deviate from the actual positions that
respond to your touch, adjust the response po-
sitions of the touch panel screen.
p Do not use a sharp pointed tool such as a
ballpoint pen or a mechanical pen, which
Available options:
could damage the screen.
! Coloured keys: Selects the desired preset
1 Display the “System Settings” screen. colour
= For details, refer to Displaying the “System ! Memory 1/Memory 2: Colours registered
Settings” screen on page 136. in the memory
= For details, refer to Creating a user-de-
2 Touch [Screen Calibration]. fined colour and storing it to memory on
A message confirming whether to start the ca- this page.
libration appears. ! Scan: Shifts between the eight default col-
ours in sequence gradually.
3 Gently touch the centre of + mark dis- ! Eco: The colours change in the order of
played on the screen. white, red, amber, yellow, green, and blue
The target indicates the order. as the number of points in the “Eco Score”
After you touch all marks, the adjusted posi- increases.
tion data is saved. p The illumination lights in white when
p Do not turn off the engine while saving the “Eco Score” is set to “Off” or when no
adjusted position data. route is set.
# Press the MODE button.
Returns to the previous adjustment position.
# Press and hold the MODE button. Creating a user-defined colour and
Cancels the adjustment. storing it to memory
You can create a user-defined colour and set it
as the illumination colour.
Setting the illumination colour
The illumination colour can be selected from 8 1 Display the “System Settings” screen.
different colours. Furthermore, the illumina- = For details, refer to Displaying the “System
tion colour can be switched between these 8 Settings” screen on page 136.
colours in order.
2 Touch [Illumi Color].
The “Illumination Color” screen appears.
Selecting the colour from the preset
colours 3 Touch [Custom].
The “Illumination Color” screen appears.
1 Display the “System Settings” screen.
p If [Scan] is set, [Custom] cannot be se-
= For details, refer to Displaying the “System
lected.
Settings” screen on page 136.
Engb 141
Chapter
27 Customising preferences
4 Touch [+] or [–] to adjust the values for % Tap on the left edge of the screen.
Red, Green and Blue to create a favourite p The appearance of this key changes accord-
colour. ing to the current setting.
Each touch of changes the settings as fol-
lows:
! Mirror AV: The video on the front screen of
the navigation unit is output to the “Rear
display”
! DISC: The video and sound of the DVDs are
output to the “Rear display”
! iPod: The video and sound of the iPod are
Watch the illumination of hardware keys while output to the “Rear display”
adjusting the colour. ! AV1: The video and sound of AV1 are out-
Each time you touch [+] or [–] increases or de- put to the “Rear display”
creases the value of the selected item. +31 to ! AV2: The video and sound of AV2 are out-
+00 is displayed as the value is increased or put to the “Rear display”
decreased. p When “Mirror AV” is selected, the following
p An entry cannot be stored with all of the va- restrictions are applied to “Rear display”.
lues set to “+00”. — When selecting “Rear View” in the map
display, nothing is displayed.
5 Touch [Memory 1] or [Memory 2] to — All sounds cannot be output for “Rear
store the illumination colour. display”.
— When playing back video files on the ex-
6 Touch [OK] to return to the previous ternal storage device (USB, SD), the
screen. video image is not output.
p When “DISC” is selected, the following re-
Checking the version information striction is applied to “Rear display”.
— When a CD or MP3/WMA/AAC disc is
1 Display the “System Settings” screen. set in the built-in DVD drive, only the
= For details, refer to Displaying the “System sound is output.
Settings” screen on page 136. p When “iPod” is selected, the following re-
striction is applied to “Rear display”.
2 Touch [Service Information].
— The video image and sound are output
The “Service Information Screen” screen ap-
only when the appropriate setting on
pears.
“AV1 Input” is “iPod”.
3 Check the version information. p When “AV” is selected, the following re-
strictions are applied to “Rear display”.
— The video image and sound are output
only when AV1/AV2 has both video and
Selecting the video for sound.
“Rear display” — The video image and sound are output
You can choose either to show the same only when the appropriate setting on
image as the front screen or to show the se- “AV1 Input” or “AV2 Input” are
lected source on the “Rear display”. “Video”.
142 Engb
Chapter
Customising preferences 27
Customising preferences
tion. To enable these functions, you must stop in of nighttime is lower than the value of day-
a safe place and apply the handbrake. Refer to time.
Important Information for the user (a separate p You cannot adjust Colour for the source
manual). without a video and navigation map display.
p The setting contents can be memorised se-
You can adjust the picture for each source and parately for the following screen and the
rear view camera. video image.
— AM/FM/CD/ROM/iPod(Music)/SD
1 Press and hold the MODE button.
(audio)/USB(audio)/Bluetooth Audio/
The “Picture Adjustment” screen appears.
EXT1(audio),EXT2(audio)/source off
2 Touch [+] or [–] to adjust the desired screen (for AVIC-F20BT)
item. — AM/FM/CD/ROM/iPod(Music)/SD
(audio)/USB(audio)/Bluetooth Audio
source off screen (for AVIC-F920BT,
AVIC-F9210BT, and AVIC-F9220BT)
— AV1 and iPod(Video)
— DVD-V and DivX
— SD(Video) and USB(Video)
— AV2(Video) and EXT1(Video), EXT2
(Video) (for AVIC-F20BT)
— AV2(Video) (for AVIC-F920BT, AVIC-
! Brightness: Adjusts the black intensity.
F9210BT, and AVIC-F9220BT)
! Contrast: Adjusts the contrast.
— Rear view camera image
! Colour: Adjusts the colour saturation.
— Map screen
! Colour Temp.: Adjusts the tone of colour
p The picture adjustment may not be avail-
(red is emphasised or green is empha-
able with some rear view cameras.
sised).
p Because of the LCD screen characteristics,
! Dimmer: Adjusts the brightness of display.
you may not be able to adjust the screen at
p Touching [Camera] switches to the picture
low temperatures.
adjustment screen for the rear view cam-
era. 3 Touch [+] or [–] to adjust the desired
p Touching [Source] while adjusting the rear item.
view camera image returns you to the pre- Each touch of [+] or [–] increases or decreases
vious screen. the level of the desired item.
p The adjustments of Brightness and
Contrast are stored separately when your 4 Touch to return to the previous
vehicle’s headlights are off (daytime) and screen.
when your vehicle’s headlights are on
(nighttime). These are switched automati-
cally depending on whether the vehicle’s
headlights are on or off.
Engb 143
Chapter
27 Customising preferences
2 Touch [Settings].
144 Engb
Chapter
Customising preferences 27
Customising preferences
the RCA video cable (for AVIC-F20BT) mercial or public viewing purposes may
! Video: External video component constitute an infringement on the author’s
rights protected by the Copyright Law.
p The navigation map and the rear view cam-
Changing the wide screen mode era picture is always viewed at Full.
1 Display the “AV System Settings”
screen.
= For details, refer to Displaying the “AV Sys-
Setting the rear output
tem Settings” screen on the previous page. The navigation system’s rear output can be
used for a full-range speaker or subwoofer
2 Touch [Wide Mode]. connection. If you switch Rear SP to Sub. W,
Each touch of [Wide Mode] changes the set- you can connect a rear speaker lead directly to
ting as follows: a subwoofer without using an auxiliary amp.
! Full (full) Initially, the navigation system is set for a rear
A 4:3 picture is enlarged in the horizontal full-range speaker connection (Full).
direction only, enabling you to enjoy a 4:3 p Both rear speaker leads output and RCA
TV picture (normal picture) without any rear output are switched simultaneously in
omissions. this setting. (When you use the product
! Cinema (cinema) without RCA rear output, this setting only
A picture is enlarged by the same propor- applies to the rear speaker leads.)
tion as Full or Zoom in the horizontal direc- p “Rear SP” can be set only when the source
tion and by an intermediate proportion is selected to “Off”.
between Full and Zoom in the vertical di-
rection; ideal for a cinema-sized picture 1 Display the “AV System Settings”
(wide screen picture) where captions lie screen.
outside the frame. = For details, refer to Displaying the “AV Sys-
! Zoom (zoom) tem Settings” screen on the previous page.
A 4:3 picture is enlarged in the same pro-
2 Touch [Rear SP].
portion both vertically and horizontally;
Each touch of [Rear SP] changes the settings
ideal for a cinema-sized picture (wide
as follows:
screen picture).
! Full
! Normal (normal)
When no subwoofer is connected to the
A 4:3 picture is displayed normally, giving
rear output, select “Full”.
you no sense of disparity since its propor-
! Sub. W
tions are the same as that of the normal
When a subwoofer is connected to the rear
picture.
output, select “Sub. W”.
p Different settings can be stored for each
video source.
p The same setting is automatically applied
for the following grouping.
! DVD-V and DivX
! AV1 and AV2
Engb 145
Chapter
27 Customising preferences
146 Engb
Chapter
Customising preferences 27
1 Display the “AV System Settings” p Make a note of the code as you will need it
screen. when you register with a DivX VOD
= For details, refer to Displaying the “AV Sys- provider.
tem Settings” screen on page 144.
Customising preferences
Touching [Auto PI] switches between “On”
and “Off”. Settings” screen
1 Press the HOME button to display the
Setting the FM tuning step “Top Menu” screen.
Normally the FM tuning step employed by 2 Touch [Settings].
seek tuning is 50 kHz. When AF or TA is on,
the tuning step automatically changes to
100 kHz. It may be preferable to set the tuning
step to 50 kHz when AF is on.
1 Display the “AV System Settings”
screen.
= For details, refer to Displaying the “AV Sys-
tem Settings” screen on page 144.
The “Settings Menu” screen appears.
2 Touch [FM Step].
Each time you touch [FM Step] will switch the 3 Touch [AV Sound].
FM tuning step between 50 kHz and 100 kHz
while AF or TA is on.
p The tuning step remains at 50 kHz during
manual tuning.
Engb 147
Chapter
27 Customising preferences
148 Engb
Chapter
Customising preferences 27
Customising preferences
“Custom2”
! A separate Custom1 curve can be created
for each source. If you make adjustments
when a curve SuperBass, Powerful,
3 Touch the equaliser you want. Natural, Vocal, Flat, or Custom1 is se-
lected, the equaliser curve settings will be
memorised in Custom1.
! A Custom2 curve can be created common
to all sources. If you make adjustments
when Custom2 curve is selected, the Cus-
tom2 curve will be updated.
! The adjusted Custom1 curve is memorised
for each of the source selected, but one
curve is shared for the following sources.
Adjusting the preset equaliser curve — CD, ROM, DVD-V, and DivX
effect — AM and FM
— EXT1 and EXT2 (for AVIC-F20BT)
You can adjust the effect of the preset equali-
— AV1 and AV2
ser curves.
— SD and USB
The following equaliser curves can be ad-
! The different source volume level can be
justed:
set between iPod and USB.
! SuperBass
! When “Flat” is selected, no supplement or
! Powerful
correction is made to the sound. This is
! Natural
useful to check the effect of the equalizer
! Vocal
curves by switching alternatively between
1 Display the “AV Sound Settings” “Flat” and a set equalizer curve.
screen.
1 Display the “AV Sound Settings”
= For details, refer to Displaying the “AV
screen.
Sound Settings” screen on page 147.
= For details, refer to Displaying the “AV
2 Touch [EQ]. Sound Settings” screen on page 147.
4 Touch [+] or [–] next to “Nuance”. 3 Touch one of the keys to select a curve
p The level can be adjusted in the range of –6 that you want to use as the basis of custo-
to +6. mising.
p If “Natural” is selected, the level can be ad-
4 Touch [Customize].
justed in the range of –4 to +6.
Engb 149
Chapter
27 Customising preferences
150 Engb
Chapter
Customising preferences 27
Customising preferences
p Settings are based on the FM tuner volume
level, which remains unchanged. Setting a stage that fits your image
1 Compare the FM tuner volume level 1 Display the “AV Sound Settings”
with the level of the source you wish to ad- screen.
just. = For details, refer to Displaying the “AV
Sound Settings” screen on page 147.
2 Display the “AV Sound Settings”
screen. 2 Touch [Staging].
= For details, refer to Displaying the “AV
Sound Settings” screen on page 147. 3 Touch desired stage setting.
3 Touch [SLA].
Engb 151
Chapter
27 Customising preferences
2 Touch [Settings].
The “Settings Menu” screen appears.
6 Touch [Yes].
Update starts.
After the settings are updated, a message con-
firming whether to restart the navigation sys-
tem appears.
7 Touch [OK].
The navigation system restarts.
152 Engb
Chapter
p This function is available for AVIC-F20BT The basic steps of voice operations are as fol-
only. lows.
CAUTION j
Engb 153
Chapter
2 4
p Say the number that you want to select.
When you select the entry next to “1”, say
1 Voice help menu:
“Number 1”.
Displays a list of commands for voice op-
p If there are multiple items that correspond
eration.
to the name you gave, the list screen ap-
2 Voice operation condition indicator:
pears. In this case, touch the item you want
When is indicated, the navigation sys-
to select from the list.
tem can recognise your voice commands.
3 : 1 Press the MODE button to display the
Touch to listen to the brief operating in- map screen or the AV operation screen.
struction.
4 : 2 Press the button to activate voice
Touch to cancel voice operation. operations.
You can cancel the voice operation feature A list of commands for voice operation ap-
at any time by saying “Cancel”. After you pears. After a message, the beep indicates
cancel voice operations, the display returns that the system is ready to accept your voice
to the screen displayed before the voice op- command. Say a command after this beep.
eration screen appeared.
3 Say “I need directions”.
A message prompting you to select a search
How to use the voice operation by address or by POI appears.
Searching for a location by address 4 Say “Find an address”.
In this example, you want to search for a loca- A message prompting the next operation is
tion by address and set it as your destination. given.
p The area in which address search is avail-
able depends on the [Voice Language] set- 5 Say the city name that you want to set
ting, as listed in the following table. to your destination.
Voice Language Available search area 6 Say the street name that you want to
set to your destination.
UK English
United Kingdom
UK English :TTS
7 Say the house number that you want
Español
Spain
to set to your destination.
Español :TTS Your navigation system sets the route to your
Deutsch destination, and the map of your surroundings
Germany
Deutsch :TTS appears.
Français # If you say “Just go there” , the navigation sys-
France
Français :TTS tem sets the route to the representative location
of the city or the street.
154 Engb
Chapter
Engb 155
Chapter
Basic commands
Voice commands and operations
Previous song d Plays the previous track or file, or returns to the beginning of the track or file currently playing.
156 Engb
Chapter
Call <entry’s name> Home d Displays the message confirming whether to dial d Say Yes d Dials the home
phone number of the entry (*2).
Call <entry’s name> Office d Displays the message confirming whether to dial d Say Yes d Dials the office
phone number of the entry (*2).
Call <entry’s name> Other d Displays the message confirming whether to dial d Say Yes d Dials the other
phone number of the entry (*2).
Call <phone number> d Displays the message confirming whether to dial d Say Yes d Dials the phone number.
Make a call d Say the phone number you want to call d Displays the message confirming whether to dial d Say
Yes d The system starts dialling to the number.
Make a call d Say the name of entry stored on “Contacts” you want to call d Displays the message confirming
whether to dial d Say Yes d The system starts dialling to the number (*1).
Find the nearest d Displays the category list d Say the category that you want to set to your destination d Displays
the list of candidates with number d Show me details for <the number that you want to select> d Call d Dialing
starts.
(*1) If the entry has multiple phone number data, selection list may appear. In such case, say the type of phone num-
ber.
(*2) If there is no corresponding type on the entry, the system may suggest you other phone numbers of the entry. In
such case, say the type of phone number.
Engb 157
Chapter
29 Other functions
8 Touch [OK].
Forgotten password
Password protection is applied. Contact the nearest authorised Pioneer Ser-
p If you want to change the password cur- vice Station.
rently set, enter the current password and
then enter the new one.
158 Engb
Chapter
Other functions 29
Other functions
that is cleared by each method, see the list
presented later.
Engb 159
Chapter
29 Other functions
Options — 1 1 1
Keyboard — 1 1 1
Others Learnt data used in Learning
1 — 1 1
Route
Point registered in Favourites — — 1 —
Destination
History — — 1 —
View Mode — — 1 1
Map Settings
Other settings — 1 1 1
3D Calibration Status — — — —
Demo Mode 1 1 1 1
Navi Settings
Set Home — — 1 —
Back Camera 1 — — —
Other settings — 1 1 1
Bluetooth Set-
All settings (*1) — 1 1 1
tings
160 Engb
Chapter
Other functions 29
Volume 1 — — —
Other functions
— 1 1 1
AV Settings
Other settings 1 — — —
Picture Adjustment 1 — — —
Other functions
Tilt 1 — — —
(*2) All settings including the setting on the “Function” menu are deleted.
Restore Factory Settings 3 Press and hold the MODE button and
p Be sure to read “Setting items to be deleted” the TRK (c) button while splash screen ap-
before you perform this operation. pears.
p For users of AVIC-F20BT, press the MODE
1 Display the “System Settings” screen.
button and the TRK (m) button.
= For details, refer to Displaying the “System
The “Select Items to Reset” screen appears.
Settings” screen on page 136.
4 Touch [Clear user information] or
2 Touch [Restore Factory Settings].
[Reset].
The message confirming whether to restore
the settings appears.
3 Touch [Yes].
Engb 161
Appendix
Appendix
Troubleshooting
If you have problems operating your navigation system, refer to this section. The most common
problems are listed below, along with likely causes and solutions. If a solution to your problem
cannot be found here, contact your dealer or the nearest authorised Pioneer service facility.
162 Engb
Appendix
Appendix
Appendix
The navigation system is installed Confirm the installation angle. (The naviga-
with an extreme angle exceeding tion system must be installed within the al-
the installation angle limitations. lowed installation angle. For details, refer to
Installation Manual.)
Indication of the position of your ve- Check whether or not the reverse gear signal
hicle is misaligned after a U-turn or input lead (violet) is connected properly. (The
reversing. navigation system works properly without the
lead connected, but positioning accuracy will
be adversely affected.)
“Eco Graph” is not available. The navigation system is unable to Drive about 10 km on a road without obstruc-
obtain past average fuel mileage tions. Then park your vehicle in a safe place,
data, so “Eco Graph” cannot be dis- turn off the navigation system and turn the
played. power to the navigation system back on.
The map colour does not switch “Day/Night Display” is set to Check “Day/Night Display” setting and
automatically between daytime “Day”. make sure “Automatic” is selected. (Page
and nighttime. 134)
The orange/white lead is not con- Check the connection.
nected.
The screen is too bright. Picture quality adjustment of the Adjust the picture quality. (Page 143)
display is not correct.
The display is very dim. The vehicle’s light is turned ON, and Read about “Day/Night Display” setting
“Automatic” is selected on “Day/ and, if desired, select “Day”. (Page 134)
Night Display”.
Picture quality adjustment of the Adjust the picture quality. (Page 143)
display is not correct.
No sounds of AV source are pro- The volume level is low. Adjust the volume level.
duced.
The attenuator or mute is on. Turn the attenuator or mute off.
The volume level will not rise.
A speaker lead is disconnected. Check the connection.
The volume of navigation gui- VOL (+/–) button is used to adjust Turn the volume up or down using [Volume]
dance and beeps cannot be ad- the volume. on the “System Settings” menu. (Page 138)
justed.
The person on the other end of The voice from the person on the Use the following methods to reduce the
the phone call cannot hear the other end of the phone call is output echo:
conversation due to an echo. from the speakers and then picked —Lower the volume on the receiver
up by the microphone again, creat- —Have both parties pause slightly before
ing an echo. speaking
Engb 163
Appendix
Appendix
164 Engb
Appendix
Appendix
Appendix
motion, or frame-by-frame playback frame-by-frame playback with DVD-Video.
with DVD-Video.
The system is paused or performing, For the media other than music CD (CD-DA),
fast reverse or forward during the there is no sound on fast reverse or forward.
disc playback.
The icon 9 is displayed, and op- The operation is not compatible This operation is not possible. (For example,
eration is not possible. with the video configuration. the DVD playing does not feature that angle,
audio system, subtitle language, etc.)
The picture stops (pauses) and The reading of data is impossible After touching g once, start playback once
the navigation system cannot be during disc playback. more.
operated.
The picture is stretched, with in- The aspect setting is incorrect for Select the appropriate setting for that image.
correct aspect ratio. the display. (Page 145, Page 97)
A parental lock message is dis- Parental lock is on. Turn parental lock off or change the level.
played and DVD playback is not (Page 98)
possible.
Parental lock for DVD playback The code number is incorrect. Input the correct code number. (Page 98)
cannot be cancelled.
Playback is not with the audio The DVD playing does not feature Switching to a selected language is not possi-
language and subtitle language dialogue or subtitles in the lan- ble if the language selected in “DVD/DivX®
settings selected in “DVD/ guage selected in “DVD/DivX® Setup” is not recorded on the disc. (Page 97)
DivX® Setup”. Setup”.
The picture is extremely unclear/ The disc features a signal to prohibit Since the navigation system is compatible
distorted and dark during play- copying. (Some discs may have with the copy guard analogue copy protect
back. this.) system, the picture may suffer from horizon-
tal stripes or other imperfections when a disc
with that kind of protection signal is viewed
on some displays. This does not mean the na-
vigation system is malfunctioning.
iPod cannot be operated. The iPod is frozen. ! Reconnect the iPod with the USB interface
cable for iPod.
! Update the iPod software version.
An error has occurred. ! Reconnect the iPod with the USB interface
cable for iPod.
! Park your vehicle in a safe place, and turn
off the engine. Turn the ignition key back to
Acc off. Then start the engine again, and turn
the power to the navigation system back on.
! Update the iPod software version.
Engb 165
Appendix
Appendix
166 Engb
Appendix
Appendix
Appendix
Route calculation not possi- The destination is too far. Set a destination closer to the starting point.
ble: destination is too far.
Route calculation not possi- The destination is too close. Set a destination farther from the starting
ble: destination is too close. point.
Route calculation not possi- The destination, waypoint(s), or ! Set a destination and waypoint(s) on roads.
ble: navigation cannot be pro- starting point are in an area where ! Reset the destination after you drive the ve-
vided around destination or no road exists (e.g. a mountain) and hicle to any road.
starting point. the route calculation is impossible.
Route to destination cannot The destination or waypoint(s) are in Change the destination.
be calculated. an isolated island, etc. without a
ferry and the route calculation is im-
possible. If there is no road con-
nected to your starting point or
destination, this message will ap-
pear.
Failed to make the route pro- In rare cases, a route calculation ! Retry.
file. error may occur. ! Consult the Pioneer Local dealer if this mes-
sage persists.
No picture folder. Save jpeg Cannot load the image because Use appropriate data and store it correctly.
file to /Pictures/ folder “Pictures” folder is not found in the (Page 139)
inserted external storage device.
“Pictures” folder exists on the SD Use appropriate data and store it correctly.
memory card but there is no load- (Page 139)
able data in the folder.
Data Read error. Failed to read the data for some rea- Use appropriate data and store it correctly.
son. (Page 139)
The file is corrupt The data is damaged or an attempt Use appropriate data and store it correctly.
was made to set an image file that (Page 139)
was not made to specifications as
the splash screen.
Engb 167
Appendix
Appendix
168 Engb
Appendix
Appendix
Appendix
The disc is loaded upside down Check that the disc is loaded correctly.
Playback error. Please remove Electrical or mechanical ! Replace the disc.
the disc. ! Set the ACC to off and then set it to on
again.
Region code cannot be The disc does not have the same re- Replace the DVD-Video with one bearing the
matched (DIFFERENT REGION gion number as the navigation sys- correct region number.
DISC) tem.
Unreadable disc This type of disc cannot be played Replace the disc with one the navigation sys-
by the navigation system. tem can play. (Page 180, Page 196)
Playback error due to irregu- The temperature of the navigation Wait until the unit’s temperature returns to
lar temperature. Please re- system is out of the normal operat- within normal operating limits.
move the disc. (THERMAL ing range.
PROTECTION IN MOTION)
Error not defined (ERROR-FF- Undefined error Set the ACC to off and then set it to on again.
FF)
Tracks that cannot be played Files that are protected by digital The protected files are skipped.
back will be skipped (FILE rights management (DRM).
SKIPPED)
Cannot play back all tracks All the files on the inserted disc are Replace the disc.
(PROTECTED DISC) secured by DRM.
Flash writing error. Impossible The playback history for VOD con- ! Retry.
to write on the flash. (CAN tents cannot be saved for some rea- ! If the message appears frequently, consult
NOT SAVE DATA) son. your dealer.
Authorization Error (AUTHOR- The device does not match the de- Check whether this device has been regis-
IZATION ERROR) vice registered with the VOD provi- tered with the VOD provider.
der. VOD content cannot be played
back.
Cannot play back HD file (FILE High definition (HD) DivX video can- Create playable one and retry.
NOT PLAYABLE-HIGH DEF) not be played.
SD/USB/iPod
Message Cause Action (Reference)
Tracks that cannot be played Files that are protected by digital The protected files are skipped.
back will be skipped rights management (DRM).
This type of file cannot be played by Replace it with the playable file. (Page 180,
this unit. Page 196)
Engb 169
Appendix
Appendix
170 Engb
Appendix
Appendix
Appendix
The accuracy of the GPS information depends car park.
on how good the reception is. When the sig-
nals are strong and reception is good, GPS
can determine latitude, longitude and altitude
How do GPS and dead
for accurate positioning in three dimensions. reckoning work together?
But if signal quality is poor, only two dimen- For maximum accuracy, your navigation sys-
sions, latitude and longitude, can be obtained tem continually compares GPS data with your
and positioning errors are somewhat greater. estimated position as calculated from the data
of built-in sensor. However, if only the data
from the built-in sensor is available for a long
period, positioning errors are gradually com-
pounded until the estimated position becomes
unreliable. For this reason, whenever GPS sig-
nals are available, they are matched with the
data of the built-in sensor and used to correct
it for improved accuracy.
p If you use chains on your wheels for winter
driving or put on the spare wheel, errors
may suddenly increase because of differ-
ence in wheel diameter. Initialise the sen-
Positioning by dead reckoning sor status and it may recover the accuracy
to normal condition.
The built-in sensor in the navigation system
= For details, refer to Clearing status on
also calculates your position. The current loca-
page 124.
tion is measured by detecting driving distance
with the speed pulse, the turning direction
with the gyro sensor and inclination of the
road with the G sensor.
The built-in sensor can even calculate
changes of altitude, and correct the discrepan-
cies in the distance travelled caused by driving
along winding roads or up slopes.
If you use this navigation system with connect-
ing the speed pulse, the system will become
more accurate than no connection of speed
Engb 171
Appendix
Appendix
172 Engb
Appendix
Appendix
Appendix
! If there is a parallel road.
! If there is a loop or similar road configura-
tion.
! If you take a recently opened road that is ! If you are driving on a long, straight road or
not on the map. a gently curving road.
Engb 173
Appendix
Appendix
! If you are on a steep mountain road with ! If trees or other obstacles block the GPS
many height changes. signals for a considerable period.
! If you enter or exit a multi-storey car park or ! If you drive very slowly, or in a start-and-
similar structure using a spiral ramp. stop manner, as in a traffic jam.
! If your vehicle is turned on a turntable or si- ! If you join the road after driving around a
milar structure. large car park.
174 Engb
Appendix
Appendix
Route setting information current heading. In such cases, you are in-
structed to turn around, so please turn
Route search specifications around safely by following the actual traffic
Your navigation system sets a route to your rules.
destination by applying certain built-in rules to ! In some cases, a route may begin on the
the map data. This section provides some use- opposite side of a railway or river from your
ful information about how a route is set. actual current location. If this happens,
drive towards your destination for a while,
and try route calculation again.
CAUTION ! When there is a traffic jam ahead, a detour
When a route is calculated, the route and voice
route may not be suggested if driving
guidance for the route are automatically set.
Appendix
through the traffic jam would still be better
Also, for day or time traffic regulations, only infor-
than taking the detour.
mation about traffic regulations applicable at the
! There may be instances when the starting
time when the route was calculated is consid-
point, the waypoint and the destination
ered. One-way streets and street closures may
point are not on the highlighted route.
not be taken into consideration. For example, if a
! The number of roundabout exits displayed
street is open during the morning only, but you
on the screen may differ from the actual
arrive later, it would be against the traffic regula-
number of roads.
tions so you cannot drive along the set route.
When driving, please follow the actual traffic
signs. Also, the system may not know some traf- Route highlighting
fic regulations. ! Once set, the route is highlighted in bright
colour on the map.
! The calculated route is one example of the ! The immediate vicinity of your starting
route to your destination decided by the na- point and destination may not be high-
vigation system while taking the type of lighted, and neither will areas with particu-
streets or traffic regulations into account. It larly complex road layouts. Consequently,
is not necessarily an optimum route. (In the route may appear to be cut off on the
some cases, you may not be able to set the display, but voice guidance will continue.
streets you want to take. If you need to take
a certain street, set a waypoint on that Auto reroute function
street.)
! If you deviate from the set route, the system
! If the destination is too far, there may be in-
will re-calculate the route from that point
stances where the route cannot be set. (If
so that you remain on track to the destina-
you want to set a long-distance route going
tion.
across several areas, set waypoints along
! This function may not work under certain
the way.)
conditions.
! During voice guidance, turns and intersec-
tions from the motorway are announced.
However, if you pass intersections, turns,
and other guidance points in rapid succes- Handling and care of discs
sion, some may delay or not be announced. Some basic precautions are necessary when
! It is possible that guidance may direct you handling your discs.
off a motorway and then back on again.
! In some cases, the route may require you
to travel in the opposite direction to your
Engb 175
Appendix
Appendix
Built-in drive and care ! Despite our careful design of the product,
! Use only conventional, fully circular discs. small scratches that do not affect actual
Do not use shaped discs. operation may appear on the disc surface
as a result of mechanical wear, ambient
conditions for use or handling of the disc.
This is not a sign of the malfunction of this
product. Consider it to be normal wear and
tear.
! Do not use cracked, chipped, warped, or
otherwise damaged discs as they may da-
mage the built-in drive. Playable discs
! Do not touch the recorded surface of the
DVD-Video and CD
discs.
! Store discs in their cases when not in use. DVD and CD discs that display the logos
! Avoid leaving discs in excessively hot envir- shown below generally can be played on this
onments including under direct sunlight. built-in DVD drive.
! Do not attach labels, write on or apply che- DVD-Video
micals to the surface of the discs.
! To clean a disc, wipe it with a soft cloth,
moving outward from the centre.
CD
176 Engb
Appendix
Appendix
Appendix
DVD-RAM discs.
Disc may result in scratches to the disc.
! Playback of discs may become impossible
! Serious scratches can lead to playback pro-
with direct exposure to sunlight, high tem-
blems on this navigation system. In some
peratures, or depending on the storage
cases, a DualDisc may become stuck in
conditions in the vehicle.
the disc loading slot and will not eject. To
prevent this, we recommend you refrain
from using DualDisc with this navigation DVD-Video discs
system. ! DVD-Video discs that have incompatible re-
! Please refer to the manufacturer for more gion numbers cannot be played on this
detailed information about DualDiscs. DVD drive. The region number of the player
can be found on this product’s chassis.
Dolby Digital
DVD-R/DVD-RW/DVD-R DL (Dual
This product will down-mix Dolby Digital sig-
Layer) discs
nals internally and the sound will be output in
stereo. ! Unfinalised discs which have been re-
p Manufactured under licence from Dolby corded with the Video format (video mode)
Laboratories. “Dolby” and the double-D cannot be played back.
symbol are trademarks of Dolby ! Discs which have been recorded with the
Laboratories. Video Recording format (VR mode) cannot
be played back.
! DVD-R DL (Dual Layer) discs which have
been recorded with Layer Jump recording
cannot be played back.
! For detailed information about recording
mode, please contact the manufacturer of
media, recorders, or writing software.
DTS sound
DTS audio format cannot be output, so select CD-R/CD-RW discs
an audio track other than DTS audio format.
! Unfinalised discs cannot be played back.
“DTS” is registered trademarks of DTS, Inc.
Engb 177
Appendix
Appendix
178 Engb
Appendix
Appendix
! DRM rental files cannot be operated until ! The subtitles may not be displayed correctly
playing back is started. if the displayed characters in the subtitle
! The navigation system corresponds to a file include control code.
DivX file display of up to 1 590 minutes 43 ! For materials that use a high transfer rate,
seconds. Search operations beyond this the subtitles and video may not be comple-
time limit are prohibited. tely synchronised.
! DivX VOD file playback requires supplying ! If multiple subtitles are programmed to dis-
the ID code of this navigation system to the play within a very short time frame, such as
DivX VOD provider. Regarding the ID code, 0.1 seconds, the subtitles may not be dis-
refer to Displaying your DivX VOD registra- played at the correct time.
tion code on page 147.
Appendix
! Plays all versions of DivX video (including
DivX 6) with standard playback of DivX
media files.
! For more details about DivX, visit the follow-
ing site:
http://www.divx.com/
Engb 179
Appendix
Appendix
Maximum number of
700 300
folders
Maximum number of
999 3 500 2 500
files
MP3, WMA, AAC, WAV, AVI, WMV,
Playable file types MP3, WMA, AAC, DivX
MPEG-4
Note:
Maximum playback time of audio file stored in the external storage device (USB, SD): 7.5 h (450 minutes)
MP3 compatibility
Notes:
! Ver. 2.x of ID3 tag is given priority when both Ver. 1.x and Ver. 2.x exist.
! The navigation system is not compatible with the following:
MP3i (MP3 interactive), mp3 PRO, m3u playlist
180 Engb
Appendix
Appendix
WMA compatibility
Appendix
WAV compatibility
AAC compatibility
Engb 181
Appendix
Appendix
DivX compatibility
Notes:
! The navigation system is not compatible with the following:
DivX Ultra format, DivX files without video data, DivX files encoded with LPCM (Linear PCM) audio codec
! Depending on the file information composition, such as the number of audio streams, there may be a slight
delay in the start of playback on discs.
! If a file contains more than 4 GB, playback stops before the end.
! Some special operations may be prohibited because of the composition of DivX files.
! Files with high transfer rates may not be played back correctly. The standard transfer rate is 4 Mbps for CDs and
10.08 Mbps for DVDs.
182 Engb
Appendix
Appendix
Linear PCM
(LPCM), IMA-
Compatible audio codec AAC AAC WMA
ADPCM
MP3
Bit rate: Bit rate: Bit rate: Bit rate:
Recommended Image size: QVGA
768 kbps 768 kbps 384 kbps 384 kbps
Appendix
video specifica- (320 pixels x 240
Frame rate: Frame rate: Frame rate: Frame rate:
tions pixels)
30 fps 30 fps 30 fps 30 fps
Image size: Bit rate:
Bit rate: 2 Mbps Bit rate: 2 Mbps Bit rate: 1 Mbps
WQVGA 768 kbps
Frame rate: Frame rate: Frame rate:
(400 pixels x 240 Frame rate:
30 fps 30 fps 30 fps
pixels) 30 fps
Maximum bit rate:
Bit rate: Bit rate:
Image size: VGA Bit rate: 1 Mbps Bit rate: 1 Mbps
576 kbps 576 kbps
(640 pixels x 480 Frame rate: Frame rate:
Frame rate: Frame rate:
pixels) 30 fps 30 fps
30 fps 30 fps
Engb 183
Appendix
Appendix
SD Logo is a trademark.
Level 1 Level 2 Level 3 Level 4
Notes
! This product assigns folder numbers. The user
cannot assign folder numbers.
! If there is a folder that does not contain any
SDHC Logo is a trademark.
playable file, the folder itself will display in the
folder list but you cannot check any files in
the folder. (A blank list will appear.) Also,
these folders will be skipped without display-
ing the folder number.
microSD Logo is a trademark.
Bluetooth
184 Engb
Appendix
Appendix
Windows Media™ and the Windows logo are files, but file formats and extensions differ de-
trademarks or registered trademarks of pending on the application which is used to
Microsoft Corporation in the United States encode. This unit plays back AAC files en-
and/or other countries. coded by iTunes version 7.7.
Appendix
using the navigation system.
DivX is a compressed digital video format cre- ! Do not leave the iPod in direct sunlight for ex-
ated by the DivX video codec from DivX, Inc. tended amounts of time. Extended exposure
This unit can play DivX video files recorded on to direct sunlight can result in iPod malfunc-
CD-R/RW/ROM and DVD-R/RW/ROM discs. tion due to the resulting high temperature.
Keeping the same terminology as DVD video, ! Do not leave the iPod in any location with
individual DivX video files are called “Titles”. high temperatures.
When naming files/titles on a CD-R/RW or a ! Firmly secure the iPod when driving. Do not
DVD-R/RW disc prior to burning, keep in mind let the iPod fall onto the floor, where it may be-
that by default they will be played in alphabeti- come jammed under the brake or accelerator
cal order. pedal.
p DivX® is a registered trademark of DivX,
For details, refer to the iPod’s manuals.
Inc., and is used under licence.
ABOUT DIVX VIDEO: DivX® is a digital
video format created by DivX, Inc. This is an of- iPod
ficial DivX Certified device that plays DivX
video. Visit www.divx.com for more informa-
tion and software tools to convert your files
into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This
DivX® Certified device must be registered in
order to play DivX Video-on-Demand (VOD)
content. To generate the registration code, lo-
cate the DivX VOD section in Displaying your “Made for iPod” means that an electronic ac-
DivX VOD registration code. Go to vod.divx.com cessory has been designed to connect specifi-
with this code to complete the registration pro- cally to iPod and has been certified by the
cess and learn more about DivX VOD. developer to meet Apple performance stan-
= For details, refer to Displaying your DivX dards.
VOD registration code on page 147. Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.
AAC iPod is a trademark of Apple Inc., registered in
AAC is short for Advanced Audio Coding and the U.S. and other countries.
refers to an audio compression technology
standard used with MPEG-2 and MPEG-4. Sev-
eral applications can be used to encode AAC
Engb 185
Appendix
Appendix
186 Engb
Appendix
Appendix
Appendix
Engb 187
Appendix
Appendix
Display information
Destination Menu Phone Menu
Page Page
Address 32 Dial Pad 58
Return Home 35 Call Home 59
POI Contacts 59
Petrol Station Contacts Transfer 61
Open Parking Area Received Calls 59
35
Cash Dispenser Dialled Calls 59
Hotel or Motel Missed Calls 59
Spell Name 35
Near Me 36
Near Destination 36
Around City 37
navgate FEEDS 38
Favourites 37, 45
History 38, 48
Cancel Route 44
Traffic 49
Coordinates 38
Route Overview 41
188 Engb
Appendix
Appendix
Page Page
Appendix
Navi Settings 123 Connection Status 123
Engb 189
Appendix
Appendix
Page Page
Regional Settings Displayed Info
Program Language, Voice Lan- 136 Close Up View 129
guage
City Map 130
Time 137
City Map Barrier 130
km / mile 138
Show Speed Limit 130
Average Speed 138
Show Traffic Incident 130
Volume 138
Bluetooth Connected 131
Splash Screen 139
Current Street Name 131
Back Camera 140
Favourites Icon 131
Screen Calibration 141
3D Land Mark 131
Illumi Color 141
Show Manoeuvre 132
Service Information 142
Show Eco Meter 132
Restore Factory Settings 161
Quick Access Selection 135
190 Engb
Appendix
Appendix
Page Page
Appendix
AV1 Input 144 FAD/BAL (Balance) 148
FM Step 147
Engb 191
Appendix
Appendix
Page
Connection 56
Registration 53
Device Name 63
Password 63
Bluetooth On/Off 63
Echo Cancel 63
Auto Answer Preference 64
Firmware update 65
192 Engb
Appendix
Appendix
Glossary DivX
DivX is a popular media technology created by
AAC DivX, Inc. DivX media files contain highly com-
AAC is short for Advanced Audio Coding and pressed video with high visual quality that
refers to an audio compression technology maintains a relatively small file size. DivX files
standard used with MPEG-2 and MPEG-4. can also include advanced media features like
menus, subtitles, and alternate audio tracks.
Aspect ratio
Many DivX media files are available for down-
This is the width-to-height ratio of a TV screen.
load online, and you can create your own
A regular display has an aspect ratio of 4:3.
using your personal content and easy-to-use
Wide screen displays have an aspect ratio of
tools from DivX.com.
16:9, providing a bigger picture for exceptional
Appendix
presence and atmosphere. DivX Certified
DivX Certified products are officially tested by
Bit rate
the creators of DivX and guaranteed to play all
This expresses data volume per second, or bps
versions of DivX video, including DivX 6.
units (bits per second). The higher the rate,
the more information is available to reproduce Favourites
the sound. Using the same encoding method A frequently visited location (such as your
(such as MP3), the higher the rate, the better workplace or a relative’s home) that you can
the sound. register to allow easy routing.
Built-in sensor GPS
The built-in sensor that enables the system to Global Positioning System. A network of satel-
estimate your vehicle’s position. lites that provides navigation signals for a vari-
ety of purposes.
CD-DA
This stands for a general music CD (commer- Guidance mode
cial-release audio CD). In this manual, this The mode in which guidance is given as you
word is sometime used for a distinction be- drive to your destination; the system automati-
tween data CDs (which include compressed cally switches to this mode as soon as a route
audio files) and general music CDs. has been set.
Chapter Guidance point
Titles of DVD-Video are in turn divided into These are important landmarks along your
chapters which are numbered in the same route, generally intersections. The next gui-
way as the chapters of a book. With discs fea- dance point along your route is indicated on
turing chapters, you can quickly find a desired the map by the yellow flag icon.
scene with chapter search.
Home location
Current location Your registered home location.
The present location of your vehicle; your cur-
rent location is shown on the map by a red tri-
angle mark.
Destination
A location you choose as the end point of your
journey.
Engb 193
Appendix
Appendix
194 Engb
Appendix
Appendix
Appendix
widely used. But by flexibly adjusting the bit
on the mobile phone, the phone book may be rate according to the needs of audio compres-
called a name such as “Contacts”, “Business sion, it is possible to achieve compression-
card” or something else. priority sound quality.
Set route
The route marked out by the system to your
destination. It is highlighted in bright colour
on the map.
Title
DVD-Video discs have a high data capacity, en-
abling recording of multiple videos on a sin-
gle disc. If, for example, one disc contains
three separate videos, they are divided into
title 1, title 2 and title 3. This lets you enjoy the
convenience of title search and other func-
tions.
Engb 195
Appendix
Appendix
196 Engb
Appendix
Appendix
AVIC-F9220BT .................. 1 kohm AAC decoding format ............ MPEG-4 AAC (only encoded
Equaliser (7-Band Graphic Equaliser): by iTunes):
Frequency .......................... 50 Hz/125 Hz/315 Hz/800 Hz/ .m4a
2 kHz/5 kHz/12.5 kHz DivX decoding format ............ Home Theater Ver.3.11,
Gain ...................................... ±12 dB Ver.4.X, Ver.5.X, Ver.6.X :
Loudness contour: .avi, .divx
Low ....................................... +3.5 dB (100 Hz), +3 dB
(10 kHz) USB
Mid ....................................... +10 dB (100 Hz), +6.5 dB USB standard spec. ............... USB 2.0 High Speed
(10 kHz) Max current supply ................. 500 mA
High ..................................... +11 dB (100 Hz), +11 dB File system .................................. FAT16, FAT32
(10 kHz) USB class .................................... Mass storage class
(volume: –30 dB) Decoding format ...................... MP3/WMA/AAC/WAVE/
Appendix
HPF: H.264/MPEG4/WMV
Frequency .......................... 50 Hz/63 Hz/80 Hz/100 Hz/
125 Hz SD (AVIC-F20BT)
Slope .................................... –12 dB/oct SD memory card, SDHC memory card
Subwoofer: Compatible physical format
Frequency .......................... 50 Hz/63 Hz/80 Hz/100 Hz/ ........................................... Version 2.00
125 Hz Max memory capacity
Slope .................................... –18 dB/oct ........................................... 16 GB
Gain ...................................... –24/+6 dB File system ........................ FAT16, FAT32
Phase .................................. Normal/Reverse Decoding format ............ MP3/WMA/AAC/WAVE/
Bass boost: H.264/MPEG4/WMV
Gain ...................................... 0 dB to +12 dB
SD (AVIC-F920BT, AVIC-F9210BT and AVIC-
DVD Drive F9220BT)
System .......................................... DVD-Video, CD, MP3, WMA, microSD card, microSDHC card
AAC, DivX system Compatible physical format
Usable discs .............................. DVD-Video, DVD-R(DL), ........................................... Version 2.00
DVD-RW, CD-ROM, CD-DA, Max memory capacity
CD-R/RW ........................................... 16 GB
Region number ........................ 2 File system ........................ FAT16, FAT32
Signal format: Decoding format ............ MP3/WMA/AAC/WAVE/
Sampling frequency ..... 44.1 kHz/48 kHz/96 kHz H.264/MPEG4/WMV
Number of quantisation bits
........................................... 16 bit/20 bit/24 bit; linear Bluetooth
Frequency response ............... 5 Hz to 44 000 Hz (with DVD, Version .......................................... Bluetooth 2.0+EDR
at sampling frequency Output power ............................ +4 dBm Max.
96 kHz) (Power class 2)
Signal-to-noise ratio ............... 97 dB (1 kHz) (IEC-A net-
work) FM tuner
(CD: 96 dB (1 kHz) (IEC-A Frequency range ...................... 87.5 MHz to 108.0 MHz
network)) Usable sensitivity ..................... 9 dBf (0.8 µV/75 W, mono,
Dynamic range ......................... 95 dB (1 kHz) (CD: 94 dB S/N: 30 dB)
(1 kHz)) Signal-to-noise ratio ............... 72 dB (IEC-A network)
Distortion ..................................... 0.008 % (1 kHz) Distortion ..................................... 0.3 % (at 65 dBf, 1 kHz,
Output level: stereo)
Video .................................... 1.0 Vp-p/75 W (±0.2 V) 0.1 % (at 65 dBf, 1 kHz,
Audio ................................... 1.0 V (1 kHz, 0 dB) mono)
Number of channels .............. 2 (stereo) Frequency response ............... 30 Hz to 15 000 Hz (±3 dB)
MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3 Stereo separation .................... 45 dB (at 65 dBf, 1 kHz)
WMA decoding format ......... Ver.9.0 L3
Engb 197
Appendix
Appendix
MW tuner
Frequency range ...................... 531 kHz to 1 602 kHz (9 kHz)
Usable sensitivity ..................... 25 µV (S/N: 20 dB)
Signal-to-noise ratio ............... 62 dB (IEC-A network)
LW tuner
Frequency range ...................... 153 kHz to 281 kHz
Usable sensitivity ..................... 28 µV (S/N: 20 dB)
Signal-to-noise ratio ............... 62 dB (IEC-A network)
RDS-TMC tuner
Rated power source ............... 13.8 V DC
(allowable voltage range:
10.0 V to 14.5 V DC)
Earthing system ....................... Negative type
Maximum current consumption
........................................... 60 mA
Dimensions (W × H × D) ... 68 mm × 49 mm × 19 mm
Weight .......................................... 180 g
Note
Specifications and design are subject to possible
modifications without notice due to im-
provements.
198 Engb
Engb 199
PIONEER CORPORATION
1-1, Shin-Ogura Saiwai-ku, Kawasaki-shi
Kanagawa-ken 212-0031, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: (800) 421-1404
PIONEER EUROPE NV Published by Pioneer Corporation.
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique Copyright © 2010 by Pioneer Corporation.
TEL: (0) 3/570.05.11 All rights reserved.