Professional Documents
Culture Documents
Instruction: The question paper contains 50 questions. Each question carries 1 Mark.
1) Within elastic limit with the increase in stress, strain gets _________.
A) Increased B) Decreased C) constant D) None
2) If one rod having change in length is 1.5 mm and tensile strain is 0.01 then find out value
original length.
A) 200mm B) 150mm C) 250mm D) 15mm
3) What is the equation to find change in length?
l a
A)δl = 𝑒 B) δl = 𝑒 C) δl = 𝑒 × 𝐴 D) δl = 𝑒 × 𝑙
7) If stress is 2000N/mm2 and its strain is 0.5 then find out value of Young’s Modulus.
A) 100 N/mm2 B) 10000 N/mm2 C) 4000 N/mm2 D)0.01 N/mm2
8) Symbol of Young’s Modulus is______
A) P B) E C) e D) R
9) Unit of Modulus of Elasticity is_________
A) N/mm B) N/mm2 C) N-m D) None
10) According to Hook’s law, within elastic limit, the ratio of stress to strain is_____.
A) 1 B) 0 C) Constant D) -1
11) What is the Symbol of the capacitor is?
A) B) C) D)
12) Which element is to oppose the flow of current in electrical circuit?
A) Diode B) Resistor C) Inductor D) Transistor
13) ________converts A.C Voltage in to D.C Voltage.
A) Diode B) Transistor C) Inductor D) Capacitor
14) Full Name of IC?
A) Interconnected Circuit B) Integrated Circuit
C) Integrated Coil D) Interaction Circuit
15) Bit of soldering iron is made of__________.
A) Brass B) Plastic C) Copper D) Steel
16) What is the Symbol of the Transistor is?
A) B) C) D)
17) Transistor has______ terminals
A) 2 B) 3 C) 1 D) 4
18) To block the dc supply flow in the circuit which element is used?
A) Diode B) Capacitor C) Resistor D) Transistor
19) To discharge the capacitor which component is used?
A) Diode B) Capacitor C) Resistor D) Transistor
20) Proportion of tin in solder wire is____________
A) 40% B) 50% C) 60% D) 30%
21) The resistor is represented by?
A) L B) I C) C D) R
22) Transistor has______ terminals
A) 2 B) 3 C) 1 D) 4
23) Chain surveying is _______ based surveying.
A) Instrument B) Object C) method D) filed
24) Length of ranging rod ______meter for surveying.
A) 7 or 8 B) 5 or 6 C) 2 or 3 D) 9 or 10
25) To determine point of surveying ________ is used.
A) peg B) filed book C) ranging rod D) filed
26) Chain length is __________ meter which is use in chain surveying.
A) 40 B) 20 C) 10 D) 80
27) Mine surveying is __________based surveying.
A) Instrument B) Object C) method D) filed