Professional Documents
Culture Documents
PERMANENT PACKER
Approved by: Glen Pitts Date: 6-06-2007
SIGNIFICANT PART NUMBERS
Scope:
This design standard documents the part numbering system for Perma-Series® Permanent
Packers. This document is controlled by the Packer Design Group in the Halliburton
Completion Tools PSL.
Technical Application:
This Standard provides a system for designating part numbers that describe the items’
basic characteristics and/or specification.
Sequence of Design
Element Type
Top Sub 0 = Nitrile Element w/Std. B/U's
B = Standard Lug 1 = Aflas® Elements w/Std. B/U's
C = Overshot Head 2 = Aflas®/Teflon®/Wire Mesh/1018
D = Scoop Head & Lug 3 = EPDM Elements W/1018 B/U's
G = Top Snap w/Std. W/L Guide 4 = HNBR w/Std. B/U's
H = HS Tool-Guide & Lug 5 = Fluorel w/Std. B/U's
J = Short Head Ratch-Latch® w/HS Guide
M =Top Snap w/ HS Guide Bore Size
N = Top Snap w/o Guide 0 = 2.375"
R = Ratch-Latch® 1 = 2.555"
S = Short Head Ratch-Latch® 2 = 2.750"
T = Short Head Ratch-Latch® w/Scoop Guide 3 = 3.000"
V = Top Snap w/VBA Style Head 4 = 4.000"
5 = 5.000"
6 = 6.000"
Casing Size 7 = 3.250"
40 = 4" 65 = 6 5/8" 8 = 4.500"
45 = 4 1/2" 70 = 7" 9 = Non-Standard
50 = 5" 75 = 7 5/8"
55 = 5 1/2" 85 = 8 5/8”
95 = 9 5/8”
Note: The list of examples shown above is not inclusive of all possible combinations.
212 AWB 70 00 - A
Sequence of Designs
(Not Indicating Compatibility)
Bottom Sub, Setting
Method, Top Sub Type Casing Size *
* Use Casing Size And Material Types From PERMA-SERIES® Permanent Packer
Part Numbering System.