Professional Documents
Culture Documents
MAX2692/MAX2695
MAX2692
VCC MAX2695 RFOUT RF
VCC A1 A2 OUTPUT
C2
R1
25kI
SHDN
C1 OPTIONAL SHUTDOWN
L1
RF RFIN
B1 B2 GND
INPUT
MAX2692 MAX2695
L1 = 4.3nH L1 = 3.3nH
C1 = 100nF C1 = 100nF
C2 = 1nF C2 = 100nF
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
MAX2692/MAX2695
Note 1: Refer to Application Note 1891: Wafer-Level Packaging (WLP) and its Applications.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional opera-
tion of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
DC ELECTRICAL CHARACTERISTICS
(MAX2692/MAX2695 EV kit, VCC = 1.6V to 3.6V, TA = -40NC to +85NC, no RF signals are applied. Typical values are at VCC = 2.85V
and TA = +25NC, unless otherwise noted.) (Note 2)
PARAMETER CONDITIONS MIN TYP MAX UNITS
Supply Voltage 1.6 2.85 3.6 V
MAX2692 4.0
SHDN = high mA
Supply Current MAX2695 4.0
Shutdown mode, VSHDN = 0V 10 µA
Digital Input Logic-High (Note 3) 1.2 V
Digital Input Logic-Low (Note 3) 0.45 V
AC ELECTRICAL CHARACTERISTICS
(MAX2692/MAX2695 EV kit, VCC = 1.6V to 3.6V, TA = -40NC to +85NC, MAX2692 fRFIN = 2.45GHz, MAX2695 fRFIN = 3.5GHz. Typical
values are at VCC = 2.85V and TA = +25NC, unless otherwise noted.) (Note 3)
PARAMETER CONDITIONS MIN TYP MAX UNITS
MAX2692 (WLAN) 2.45
RF Frequency GHz
MAX2695 (WiMax) 3.5
MAX2692 13.5 18.2
VCC = 2.85V (Note 4)
MAX2695 11.1 15.6
Power Gain dB
MAX2692 13.2 18
VCC = 1.6V
MAX2695 10.9 15.6
MAX2692 1.1
Noise Figure VCC = 1.6V to 3.6V dB
MAX2695 1.2
MAX2692 -3
3rd-Order Input Intercept Point (Note 5) dBm
MAX2695 -3
MAX2692 -16
Input 1dB Compression Point (Note 6) dBm
MAX2695 14.5
MAX2692 8.5
Input Return Loss dBm
MAX2695 7.5
MAX2692
INPUT RETURN LOSS vs. FREQUENCY GAIN vs. FREQUENCY REVERSE ISOLATION vs. FREQUENCY
0 20 -25
MAX2692 toc01
MAX2692 toc02
MAX2692 toc03
-2 18
-4 16 -30
-6 14
-8 12 -35
|S11| (dB)
GAIN (dB)
|S12| (dB)
-10 10
-12 8 -40
-14 6
-16 4 -45
-18 2
-20 0 -50
1500 2000 2500 3000 3500 1500 2000 2500 3000 3500 1500 2000 2500 3000 3500
FREQUENCY (MHz) FREQUENCY (MHz) FREQUENCY (MHz)
0
MAX2692 toc05
-5
-1
+25°C
-10 +85°C
-2
|S22| (dB)
IIP3 (dBm)
-15
-3
-20
-4
-25 -40°C
-5
-30
1500 2000 2500 3000 3500 -6
1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6
FREQUENCY (MHz)
SUPPLY VOLTAGE (V)
MAX2692
INPUT P1dB vs. SUPPLY VOLTAGE 1dB GAIN DESENSE
AND TEMPERATURE vs. BLOCKER FREQUENCY
-10 0
MAX2692 toc06
MAX2692 toc07
-12 -5
-10
-14
-15
-16
-20
-18 -40°C
-25
-20 -30
1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 1500 2000 2500 3000 3500
SUPPLY VOLTAGE (V) BLOCKER FREQUENCY (MHz)
MAX2695
MAX2692 toc09
-1 16
-2 14
-3
12
-4
|S11| (dB)
GAIN (dB)
10
-5
8
-6
6
-7
-8 4
-9 2
-10 0
2500 3000 3500 4000 4500 2500 3000 3500 4000 4500
FREQUENCY (MHz) FREQUENCY (MHz)
MAX2695
REVERSE ISOLATION vs. FREQUENCY OUTPUT RETURN LOSS vs. FREQUENCY IN-BAND IIP3 vs. SUPPLY VOLTAGE
-25 0 AND TEMPERATURE
MAX2692 toc10
MAX2692 toc11
0
MAX2692 toc12
-5
-30
-1
-10
-35 -2
|S12| (dB)
|S22| (dB)
+85°C +25°C
IIP3 (dBm)
-15
-40 -3
-20
-4
-45
-25
-5 -40°C
-50 -30
2500 3000 3500 4000 4500 2500 3000 3500 4000 4500 -6
FREQUENCY (MHz) FREQUENCY (MHz) 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6
SUPPLY VOLTAGE (V)
MAX2692 toc14
-5
-12 +85°C
|BLOCKER POWER| (dBm)
+25°C
INPUT P1dB (dBm)
-10
-14
-15
-16
-20
-40°C
-18
-25
-20 -30
1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 2500 3000 3500 4000 4500
SUPPLY VOLTAGE (V) BLOCKER FREQUENCY (MHz)
Bump Configuration
TOP VIEW
+
VCC A1 A2 RFOUT(SHDN)
MAX2692
MAX2695
RFIN B1 B2 GND
WLP
Bump Description
BUMP NAME FUNCTION
A1 VCC Supply Voltage. Bypass to ground with a 10pF capacitor as close as possible to the IC.
RF Output/SHDN Input. RFOUT is internally matched to 50I and pulled up to VCC through a 25kI
RFOUT
A2 resistor. SHDN is shared with the RFOUT bump. The devices are in active mode by default once
(SHDN)
VCC is applied. RFOUT(SHDN) can be pulled to a DC low externally to shut down the IC.
B1 RFIN RF Input. Requires a DC-blocking capacitor and external matching components.
B2 GND Ground. Connect to the PCB ground plane.
Revision History
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied.
Maxim reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits) shown in the Electrical
Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 9
© 2011 Maxim Integrated Products Maxim is a registered trademark of Maxim Integrated Products, Inc.
MAX2692/MAX2695