Professional Documents
Culture Documents
1MRS 750406-MBG
Page 1
Issued: April 1999
Status: New
Data subject to change without notice
Application The analog annunciator unit is used in a vari- vides a means for subsequent fault analyses,
ety of applications requiring supervision of which means that corrective measures can be
alarm and signalling contacts in power plants, carried out without delay and full control of
substations and industrial process installa- the process can be maintained.
tions. The alarm unit is also approved for use
in off-shore installations and marine applica- The annunciator units can be used as indepen-
tions. Further, the annunciator unit can be dent stand-alone units, or they can be con-
used in any application where on/off signals nected together via a fibre-optic bus to form
are to be supervised. complete supervision, event sequence report-
ing and data acquisition systems.
The annunciator unit provides immediate
fault recognition, fault identification and The annunciator unit is a member of SPA-
visual and audible alarm in an abnormal pro- COM, the ultimate integrated secondary
cess situation. The annunciator unit also pro- equipment system for power systems.
ABB Network Partner Annunciator unit SACO 16D1
1MRS 750406-MBG
Page 2
The annunciator unit is also provided with an If a permanent fault is detected, the fault indi-
event register, which stores the last nine cator on the front panel is lit, the output relay
events in chronological order. The event reg- of the self-supervision system operates and
ister can be read via the push-buttons and the the outputs are blocked.
display on the front panel or via the serial
interface. Auxiliary supply voltage
The auxiliary supply of the relay is obtained
The annunciator holds four output relays, two from an internal plug-in type power supply
of which are used as group alarm output module. Two auxiliary power module types
relays. One of four modes of operation can be are available: type SPGU 240A1 for the sup-
selected for the realarm output relays. ply voltage range 80…265 V ac/dc and type
SPGU 48B2 for the supply voltage range
One output relay is dedicated for the self- 18…80 V dc. The power supply module
supervision system and one for the control of forms the internal voltages required by the
an audible device, such as a buzzer or a horn. annunciator.
1 2 16 1 2
SWIM 2A1
Internal supply
SACO 16D1
139 ±1
Panel cut-
136
162
out
dim16D1
Semi-flush mounting
a b
Raising frame a b
SFM16D1
SPA-ZX104 SPA-ZX106
SPA-ZX105
+0,4
482,6 –0 (19")
177 –0 (4U)
101,6
7
+0,4
21,5
16D1_4_6
Order numbers
Annunciator unit SACO 16D1 RS 811 016-AA, -BA
The last two letters of the order number indicate the AA equals Uaux = 80… 265 V ac/dc
auxiliary voltage Uaux of the annunciator unit as BA equals Uaux = 18…80 V dc
follows: