You are on page 1of 2

Chemrite Insutherm

Chemrite Insutherm
Extruded Polystyrene Foam Board for Thermal Insulation
_______________________________________________________________________________
Product Description Chemrite Insutherm is an extruded polystyrene, closed-cell
foam board which possess excellent heat insulation
characteristics.
_______________________________________________________________________________
Uses Chemrite Insutherm is suitable for use in:
-- Roofs, Balconies, Walls etc.
-- External Walls of Overhead Tanks.
-- Industrial structures exposed to hot ambient environment.
-- Any other surface requiring thermal insulation.
_______________________________________________________________________________
Advantages Chemrite Insutherm possess following advantages:
-- Durable, retains inherent compressive strength during its
long service life.
-- Closed-Cell formation prevents movement of moisture
through the installed boards
-- Resists deterioration due to creep and fatigue.
-- Bonds perfectly with cementitious, bituminous or epoxy
resin adhesives.
-- Environmental friendly with zero ozone-depletion
potential
-- Easy to install & is reusable if removed without damage
during dismantling.
_______________________________________________________________________________

Product Characteristics
_______________________________________________________________________________
Physical Properties
_______________________________________________________________________________
Form Extruded Polystyrene, Closed-Cell Insulation Board
_______________________________________________________________________________
Board Size 6 ft x 4 ft
_______________________________________________________________________________
Thickness 1 ½ inch; other thickness available on demand
_______________________________________________________________________________
Average Density 35 kg / m3
_______________________________________________________________________________
Chemrite Insutherm

_______________________________________________________________________________
Technical Properties
_______________________________________________________________________________
Thermal Resistance 5.25 (W/mK) ASTM C-518, C-177
‘R’ @ 25oC
_______________________________________________________________________________
Compressive Strength 250 – 400 KPa ASTM D-1621
Range
_______________________________________________________________________________
Water Absorption < 1 % by volume ASTM D-2842
(96 hr. immersion)
_______________________________________________________________________________
Coefficient of Linear 6.0 x 10-2 mm/mK ASTM D-696
Thermal Expansion
_______________________________________________________________________________
Average Flexural 500 KPa ASTM C-203
Strength
_______________________________________________________________________________
Average Compression 15,000 KPa ASTM D-1621
Modulus
_______________________________________________________________________________
Installation CHEMRITE INSUTHERM board should be placed on sound
substrate, free of oil and grease. Being lightweight, it is easy to
handle and can be cut to the required size with a utility knife or a
sharp blade.
_______________________________________________________________________________
Storage ● Store in a Shaded Area
● Protect from fire
_______________________________________________________________________________
Health & Safety Non-toxic, Non-Hazardous
_______________________________________________________________________________

You might also like